* [PATCH] OMAP2: Devkit8000: Fix mmc regulator failure
@ 2010-11-01 22:48 ` Thomas Weber
0 siblings, 0 replies; 4+ messages in thread
From: Thomas Weber @ 2010-11-01 22:48 UTC (permalink / raw)
To: tony
Cc: Thomas Weber, Russell King, linux-omap, linux-arm-kernel, linux-kernel
This patch fixes the following error:
>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
standby
>twl_reg twl_reg.6: can't register VMMC1, -22
>twl_reg: probe of twl_reg.6 failed with error -22
Signed-off-by: Thomas Weber <weber@corscience.de>
---
arch/arm/mach-omap2/board-devkit8000.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f437..53ac762 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
--
1.7.3.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] OMAP2: Devkit8000: Fix mmc regulator failure
@ 2010-11-01 22:48 ` Thomas Weber
0 siblings, 0 replies; 4+ messages in thread
From: Thomas Weber @ 2010-11-01 22:48 UTC (permalink / raw)
To: linux-arm-kernel
This patch fixes the following error:
>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
standby
>twl_reg twl_reg.6: can't register VMMC1, -22
>twl_reg: probe of twl_reg.6 failed with error -22
Signed-off-by: Thomas Weber <weber@corscience.de>
---
arch/arm/mach-omap2/board-devkit8000.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f437..53ac762 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
--
1.7.3.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] OMAP2: Devkit8000: Fix mmc regulator failure
2010-11-01 22:48 ` Thomas Weber
@ 2010-11-05 19:12 ` Tony Lindgren
-1 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2010-11-05 19:12 UTC (permalink / raw)
To: Thomas Weber; +Cc: Russell King, linux-omap, linux-arm-kernel, linux-kernel
* Thomas Weber <weber@corscience.de> [101101 14:38]:
> This patch fixes the following error:
>
> >regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
> standby
> >twl_reg twl_reg.6: can't register VMMC1, -22
> >twl_reg: probe of twl_reg.6 failed with error -22
Adding this into omap-fixes.
Tony
> Signed-off-by: Thomas Weber <weber@corscience.de>
> ---
> arch/arm/mach-omap2/board-devkit8000.c | 3 ---
> 1 files changed, 0 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
> index 067f437..53ac762 100644
> --- a/arch/arm/mach-omap2/board-devkit8000.c
> +++ b/arch/arm/mach-omap2/board-devkit8000.c
> @@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
> mmc[0].gpio_cd = gpio + 0;
> omap2_hsmmc_init(mmc);
>
> - /* link regulators to MMC adapters */
> - devkit8000_vmmc1_supply.dev = mmc[0].dev;
> -
> /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
> gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
>
> --
> 1.7.3.2
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] OMAP2: Devkit8000: Fix mmc regulator failure
@ 2010-11-05 19:12 ` Tony Lindgren
0 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2010-11-05 19:12 UTC (permalink / raw)
To: linux-arm-kernel
* Thomas Weber <weber@corscience.de> [101101 14:38]:
> This patch fixes the following error:
>
> >regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
> standby
> >twl_reg twl_reg.6: can't register VMMC1, -22
> >twl_reg: probe of twl_reg.6 failed with error -22
Adding this into omap-fixes.
Tony
> Signed-off-by: Thomas Weber <weber@corscience.de>
> ---
> arch/arm/mach-omap2/board-devkit8000.c | 3 ---
> 1 files changed, 0 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
> index 067f437..53ac762 100644
> --- a/arch/arm/mach-omap2/board-devkit8000.c
> +++ b/arch/arm/mach-omap2/board-devkit8000.c
> @@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
> mmc[0].gpio_cd = gpio + 0;
> omap2_hsmmc_init(mmc);
>
> - /* link regulators to MMC adapters */
> - devkit8000_vmmc1_supply.dev = mmc[0].dev;
> -
> /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
> gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
>
> --
> 1.7.3.2
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-11-05 19:13 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-11-01 22:48 [PATCH] OMAP2: Devkit8000: Fix mmc regulator failure Thomas Weber
2010-11-01 22:48 ` Thomas Weber
2010-11-05 19:12 ` Tony Lindgren
2010-11-05 19:12 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.