* [PATCH 0/3] S5PV210: added MIPI-DSI driver.
@ 2010-11-18 8:48 Inki Dae
2010-11-18 9:17 ` Paul Mundt
0 siblings, 1 reply; 13+ messages in thread
From: Inki Dae @ 2010-11-18 8:48 UTC (permalink / raw)
To: linux-arm-kernel
Hello all,
This patch is a MIPI-DSI driver for S5PV210.
PATCH 1/3 : add a structure for CPU interface to linux/fb.h
. RGB or CPU interface could be used as display mode but framebuffer
framework doesn't consider CPU interface
So I added this structure because fb_cpumode structure could be used
commonly.
PATCH 2/3 : add parameters for CPU interface to plat-samsung/fb.h
. MIPI-DSI driver would use s3c-fb driver so I added some parameters because
MIPI-DSI driver supports CPU interface also.
PATCH 3/3 : add MIPI-DSI driver for S5PV210.
Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20101118/baadb134/attachment-0001.html>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/3] S5PV210: added MIPI-DSI driver.
2010-11-18 8:48 [PATCH 0/3] S5PV210: added MIPI-DSI driver Inki Dae
@ 2010-11-18 9:17 ` Paul Mundt
0 siblings, 0 replies; 13+ messages in thread
From: Paul Mundt @ 2010-11-18 9:17 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 18, 2010 at 05:48:20PM +0900, Inki Dae wrote:
> This patch is a MIPI-DSI driver for S5PV210.
>
For starters, this patch series is horribly line wrapped, even patchwork
seems to have given up on it on principle.
Please read through Documentation/email-clients.txt and resubmit
accordingly. Attachments will suffice if you have no other choice, but
should be a last resort.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 0/3] S5PV210: added MIPI-DSI driver.
@ 2010-11-18 9:17 ` Paul Mundt
0 siblings, 0 replies; 13+ messages in thread
From: Paul Mundt @ 2010-11-18 9:17 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 18, 2010 at 05:48:20PM +0900, Inki Dae wrote:
> This patch is a MIPI-DSI driver for S5PV210.
>
For starters, this patch series is horribly line wrapped, even patchwork
seems to have given up on it on principle.
Please read through Documentation/email-clients.txt and resubmit
accordingly. Attachments will suffice if you have no other choice, but
should be a last resort.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 0/3] S5PV210: added MIPI-DSI Driver.
@ 2010-11-18 10:43 ` daeinki
0 siblings, 0 replies; 13+ messages in thread
From: daeinki @ 2010-11-18 10:43 UTC (permalink / raw)
To: linux-arm-kernel
Hello all,
This patch is a MIPI-DSI driver for S5PV210.
PATCH 1/3: add a structure for CPU interface to linux/fb.h
- RGB or CPU interfaces could be used as display mode but framebuffer
framework doesn't consider CPU interface so I added this structure
because fb_cpumode structure could be used commonly.
PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
- MIPI-DSI driver would use s3c-fb driver so I added some parameters
because MIPI-DSI driver supports CPU interface also.
PATCH 3/3: add MIPI-DSI driver for S5PV210.
thank you.
signed-off-by: Inki Dae <inki.dae@samsung.com>
signed-off-by: Kyoungmin Park <kyoungmin.park@samsung.com>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 0/3] S5PV210: added MIPI-DSI Driver.
@ 2010-11-18 10:43 ` daeinki
0 siblings, 0 replies; 13+ messages in thread
From: daeinki @ 2010-11-18 10:43 UTC (permalink / raw)
To: linux-arm-kernel
Hello all,
This patch is a MIPI-DSI driver for S5PV210.
PATCH 1/3: add a structure for CPU interface to linux/fb.h
- RGB or CPU interfaces could be used as display mode but framebuffer
framework doesn't consider CPU interface so I added this structure
because fb_cpumode structure could be used commonly.
PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
- MIPI-DSI driver would use s3c-fb driver so I added some parameters
because MIPI-DSI driver supports CPU interface also.
PATCH 3/3: add MIPI-DSI driver for S5PV210.
thank you.
signed-off-by: Inki Dae <inki.dae@samsung.com>
signed-off-by: Kyoungmin Park <kyoungmin.park@samsung.com>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/3] S5PV210: added MIPI-DSI Driver.
2010-11-18 10:43 ` daeinki
@ 2010-11-18 11:30 ` Tomi Valkeinen
-1 siblings, 0 replies; 13+ messages in thread
From: Tomi Valkeinen @ 2010-11-18 11:30 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Thu, 2010-11-18 at 19:43 +0900, ext daeinki wrote:
> Hello all,
>
> This patch is a MIPI-DSI driver for S5PV210.
>
> PATCH 1/3: add a structure for CPU interface to linux/fb.h
> - RGB or CPU interfaces could be used as display mode but framebuffer
> framework doesn't consider CPU interface so I added this structure
> because fb_cpumode structure could be used commonly.
>
> PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
> - MIPI-DSI driver would use s3c-fb driver so I added some parameters
> because MIPI-DSI driver supports CPU interface also.
>
> PATCH 3/3: add MIPI-DSI driver for S5PV210.
You have three patches, all with the same subject, and no description.
Please check Documentation/SubmittingPatches.
Tomi
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 0/3] S5PV210: added MIPI-DSI Driver.
@ 2010-11-18 11:30 ` Tomi Valkeinen
0 siblings, 0 replies; 13+ messages in thread
From: Tomi Valkeinen @ 2010-11-18 11:30 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Thu, 2010-11-18 at 19:43 +0900, ext daeinki wrote:
> Hello all,
>
> This patch is a MIPI-DSI driver for S5PV210.
>
> PATCH 1/3: add a structure for CPU interface to linux/fb.h
> - RGB or CPU interfaces could be used as display mode but framebuffer
> framework doesn't consider CPU interface so I added this structure
> because fb_cpumode structure could be used commonly.
>
> PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
> - MIPI-DSI driver would use s3c-fb driver so I added some parameters
> because MIPI-DSI driver supports CPU interface also.
>
> PATCH 3/3: add MIPI-DSI driver for S5PV210.
You have three patches, all with the same subject, and no description.
Please check Documentation/SubmittingPatches.
Tomi
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 0/3] S5PV210: added MIPI-DSI Driver.
@ 2010-11-19 1:28 ` daeinki
0 siblings, 0 replies; 13+ messages in thread
From: daeinki @ 2010-11-19 1:28 UTC (permalink / raw)
To: linux-arm-kernel
Hello all,
This patch is a MIPI-DSI driver for S5PV210.
PATCH 1/3: add a structure for CPU interface to linux/fb.h
- RGB or CPU interfaces could be used as display mode but framebuffer
framework doesn't consider CPU interface so I added this structure
because fb_cpumode structure could be used commonly.
PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
- MIPI-DSI driver would use s3c-fb driver so I added some parameters
because MIPI-DSI driver supports CPU interface also.
PATCH 3/3: add MIPI-DSI driver for S5PV210.
driver features:
. Maximum resolution ranges up to XGA (1024x760)
. CSIS0 supports 1,2,3 or 4 data lanes
. CSIS1 supports 1 or 2 data lanes
. supports pixel format : 16bpp, 18bpp packed,
18bpp loosely packed (3 byte format), and 24bpp
. supports RGB interface for video image from display controller
. support I80 interface for command mode image input from display controller
. supports PMS control inteerface for PLL to configure byte clock frequency
. supports Prescaler to generate escape clock from byte clock
thank you.
signed-off-by: Inki Dae <inki.dae@samsung.com>
signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH 0/3] S5PV210: added MIPI-DSI Driver.
@ 2010-11-19 1:28 ` daeinki
0 siblings, 0 replies; 13+ messages in thread
From: daeinki @ 2010-11-19 1:28 UTC (permalink / raw)
To: linux-arm-kernel
Hello all,
This patch is a MIPI-DSI driver for S5PV210.
PATCH 1/3: add a structure for CPU interface to linux/fb.h
- RGB or CPU interfaces could be used as display mode but framebuffer
framework doesn't consider CPU interface so I added this structure
because fb_cpumode structure could be used commonly.
PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
- MIPI-DSI driver would use s3c-fb driver so I added some parameters
because MIPI-DSI driver supports CPU interface also.
PATCH 3/3: add MIPI-DSI driver for S5PV210.
driver features:
. Maximum resolution ranges up to XGA (1024x760)
. CSIS0 supports 1,2,3 or 4 data lanes
. CSIS1 supports 1 or 2 data lanes
. supports pixel format : 16bpp, 18bpp packed,
18bpp loosely packed (3 byte format), and 24bpp
. supports RGB interface for video image from display controller
. support I80 interface for command mode image input from display controller
. supports PMS control inteerface for PLL to configure byte clock frequency
. supports Prescaler to generate escape clock from byte clock
thank you.
signed-off-by: Inki Dae <inki.dae@samsung.com>
signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.
2010-11-19 1:28 ` daeinki
@ 2011-04-14 12:15 ` daeinki
-1 siblings, 0 replies; 13+ messages in thread
From: daeinki @ 2011-04-14 12:15 UTC (permalink / raw)
To: linux-arm-kernel
Hello, all.
Samsung S5PV210 and EXYNOS4 SoC platform have one or two MIPI-DSI
controller and MIPI-DSI based LCD Panel could be used with this one.
this patch adds Samsung SoC based MIPI-DSI support.
to use MIPI-DSI based LCD Panel driver, mipi_dsim_lcd_device shoule be
registered to MIPI-DSI driver through s5p_mipi_dsi_register_lcd_device()
at machine code or machine specific somewhere first, and
mipi_dsim_lcd_driver should be registered when
s5p_mipi_dsi_register_driver() is called at init function of lcd driver,
and then probe() of that driver would be called by MIPI-DSI controller
driver if lcd panel name and id of mipi_dsim_lcd_device are same as ones
of mipi_dsim_lcd_driver.
for this, you can refer to sample lcd panel driver.
please see "Documentation/s5p_mipi_dsim/dsim_sample_lcd.c"
this patch series includes the following.
[PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.
[PATCH 2/2] video: add Samsung SoC MIPI-DSI based sample lcd panel driver.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.
@ 2011-04-14 12:15 ` daeinki
0 siblings, 0 replies; 13+ messages in thread
From: daeinki @ 2011-04-14 12:15 UTC (permalink / raw)
To: linux-arm-kernel
Hello, all.
Samsung S5PV210 and EXYNOS4 SoC platform have one or two MIPI-DSI
controller and MIPI-DSI based LCD Panel could be used with this one.
this patch adds Samsung SoC based MIPI-DSI support.
to use MIPI-DSI based LCD Panel driver, mipi_dsim_lcd_device shoule be
registered to MIPI-DSI driver through s5p_mipi_dsi_register_lcd_device()
at machine code or machine specific somewhere first, and
mipi_dsim_lcd_driver should be registered when
s5p_mipi_dsi_register_driver() is called at init function of lcd driver,
and then probe() of that driver would be called by MIPI-DSI controller
driver if lcd panel name and id of mipi_dsim_lcd_device are same as ones
of mipi_dsim_lcd_driver.
for this, you can refer to sample lcd panel driver.
please see "Documentation/s5p_mipi_dsim/dsim_sample_lcd.c"
this patch series includes the following.
[PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.
[PATCH 2/2] video: add Samsung SoC MIPI-DSI based sample lcd panel driver.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Fwd: [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.
2011-04-14 12:15 ` daeinki
@ 2011-08-01 4:06 ` InKi Dae
-1 siblings, 0 replies; 13+ messages in thread
From: InKi Dae @ 2011-08-01 4:06 UTC (permalink / raw)
To: linux-arm-kernel
Hello, Paul.
I had posted patch sets below on 15 Apr.
but there is no any comments.
please review this patch sets.
thank you.
---------- Forwarded message ----------
From: daeinki <inki.dae@samsung.com>
Date: 2011/4/14
Subject: [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.
To: linux-fbdev@vger.kernel.org, lethal@linux-sh.org
ÂüÁ¶: kyungmin.park@samsung.com, Kukjin Kim <kgene.kim@samsung.com>,
akpm@linux-foundation.org, linux-arm-kernel@lists.infradead.org
Hello, all.
Samsung S5PV210 and EXYNOS4 SoC platform have one or two MIPI-DSI
controller and MIPI-DSI based LCD Panel could be used with this one.
this patch adds Samsung SoC based MIPI-DSI support.
to use MIPI-DSI based LCD Panel driver, mipi_dsim_lcd_device shoule be
registered to MIPI-DSI driver through s5p_mipi_dsi_register_lcd_device()
at machine code or machine specific somewhere first, and
mipi_dsim_lcd_driver should be registered when
s5p_mipi_dsi_register_driver() is called at init function of lcd driver,
and then probe() of that driver would be called by MIPI-DSI controller
driver if lcd panel name and id of mipi_dsim_lcd_device are same as ones
of mipi_dsim_lcd_driver.
for this, you can refer to sample lcd panel driver.
please see "Documentation/s5p_mipi_dsim/dsim_sample_lcd.c"
this patch series includes the following.
[PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.
[PATCH 2/2] video: add Samsung SoC MIPI-DSI based sample lcd panel driver.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Fwd: [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.
@ 2011-08-01 4:06 ` InKi Dae
0 siblings, 0 replies; 13+ messages in thread
From: InKi Dae @ 2011-08-01 4:06 UTC (permalink / raw)
To: linux-arm-kernel
Hello, Paul.
I had posted patch sets below on 15 Apr.
but there is no any comments.
please review this patch sets.
thank you.
---------- Forwarded message ----------
From: daeinki <inki.dae@samsung.com>
Date: 2011/4/14
Subject: [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.
To: linux-fbdev at vger.kernel.org, lethal at linux-sh.org
??: kyungmin.park at samsung.com, Kukjin Kim <kgene.kim@samsung.com>,
akpm at linux-foundation.org, linux-arm-kernel at lists.infradead.org
Hello, all.
Samsung S5PV210 and EXYNOS4 SoC platform have one or two MIPI-DSI
controller and MIPI-DSI based LCD Panel could be used with this one.
this patch adds Samsung SoC based MIPI-DSI support.
to use MIPI-DSI based LCD Panel driver, mipi_dsim_lcd_device shoule be
registered to MIPI-DSI driver through s5p_mipi_dsi_register_lcd_device()
at machine code or machine specific somewhere first, and
mipi_dsim_lcd_driver should be registered when
s5p_mipi_dsi_register_driver() is called at init function of lcd driver,
and then probe() of that driver would be called by MIPI-DSI controller
driver if lcd panel name and id of mipi_dsim_lcd_device are same as ones
of mipi_dsim_lcd_driver.
for this, you can refer to sample lcd panel driver.
please see "Documentation/s5p_mipi_dsim/dsim_sample_lcd.c"
this patch series includes the following.
[PATCH 1/2] video: add Samsung SoC MIPI-DSI controller driver.
[PATCH 2/2] video: add Samsung SoC MIPI-DSI based sample lcd panel driver.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-08-01 4:06 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-11-18 8:48 [PATCH 0/3] S5PV210: added MIPI-DSI driver Inki Dae
2010-11-18 9:17 ` Paul Mundt
2010-11-18 9:17 ` Paul Mundt
2010-11-18 10:43 ` [PATCH 0/3] S5PV210: added MIPI-DSI Driver daeinki
2010-11-18 10:43 ` daeinki
2010-11-18 11:30 ` Tomi Valkeinen
2010-11-18 11:30 ` Tomi Valkeinen
2010-11-19 1:28 ` daeinki
2010-11-19 1:28 ` daeinki
2011-04-14 12:15 ` [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support daeinki
2011-04-14 12:15 ` daeinki
2011-08-01 4:06 ` Fwd: " InKi Dae
2011-08-01 4:06 ` InKi Dae
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.