* Freeze with 2.6.32.19 and xen-4.0.1rc5
@ 2010-08-21 13:47 Claus Rosenberger
2010-08-21 14:02 ` Pasi Kärkkäinen
` (2 more replies)
0 siblings, 3 replies; 25+ messages in thread
From: Claus Rosenberger @ 2010-08-21 13:47 UTC (permalink / raw)
To: xen-devel
Hi,
i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
with xen-4.0.1rc5. Due some reason the system freezes from time to time.
I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
anything to serial console so there are no errors or something like that.
Perhaps there is something to see from the logs ...
Hardware
Board: Intel DQ45CB
CPU: Pentium(R) Dual-Core CPU E6500 @ 2.93GHz
Memory: AENEON/Qimonda 4 x 2GB 800Mhz
Disks: WDC 1TB (2x) as software raid-1
Configuration Grub
title Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
root (hd0,0)
kernel /boot/xen-4.0-amd64.gz dom0_mem=524288 cpufreq=xen
cpuidle console=com1 com1=115200,8n1,0xf1c0,0 sync_console
module /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0
console=hvc0
module /boot/initrd.img-2.6.32.19
Console output while starting
(XEN) Xen version 4.0.1-rc5 (Debian 4.0.1~rc5-1) (waldi@debian.org) (gcc
version 4.3.2 (Debian 4.3.2-1.1) ) Sat Aug 14 21:41:28 CEST 2010
(XEN) Console output is synchronous.
(XEN) Command line: dom0_mem=524288 cpufreq=xen cpuidle console=com1
com1=115200,8n1,0xf1c0,0 sync_console
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cbb77000 (usable)
(XEN) 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
(XEN) 00000000cbbfa000 - 00000000cbd28000 (reserved)
(XEN) 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
(XEN) 00000000cbd3c000 - 00000000cbe43000 (reserved)
(XEN) 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
(XEN) 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
(XEN) 00000000cbe66000 - 00000000cbe88000 (reserved)
(XEN) 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
(XEN) 00000000cbe8e000 - 00000000cc000000 (usable)
(XEN) 00000000cdc00000 - 00000000d0000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000022c000000 (usable)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
(XEN) ACPI: XSDT CBE49E18, 0064 (r1 INTEL DQ45CB 7B MSFT 10013)
(XEN) ACPI: FACP CBE48D98, 00F4 (r4 INTEL A M I 6222004 MSFT 10013)
(XEN) ACPI: DSDT CBE43018, 4B53 (r1 INTEL DQ45CB 7B INTL 20051117)
(XEN) ACPI: FACS CBE51F40, 0040
(XEN) ACPI: APIC CBE48F18, 006C (r2 INTEL DQ45CB 7B MSFT 10013)
(XEN) ACPI: MCFG CBE53E18, 003C (r1 INTEL DQ45CB 7B MSFT 97)
(XEN) ACPI: ASF! CBE52D18, 00A0 (r32 INTEL DQ45CB 7B TFSM F4240)
(XEN) ACPI: HPET CBE53D98, 0038 (r1 INTEL DQ45CB 7B AMI. 3)
(XEN) ACPI: SPCR CBE53D18, 0050 (r1 INTEL DQ45CB 7B AMI. 3)
(XEN) ACPI: TCPA CBE53C98, 0032 (r2 INTEL DQ45CB 7B MSFT 1000013)
(XEN) ACPI: DMAR CBBF9D98, 0108 (r1 INTEL DQ45CB 7B INTL 1)
(XEN) System RAM: 8060MB (8253980kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT -
cbe4cf40/00000000cbe51f40, using 32
(XEN) Processor #0 7:7 APIC version 20
(XEN) Processor #1 7:7 APIC version 20
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2933.515 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003
(XEN) Intel VT-d Snoop Control not supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation not supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) Brought up 2 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16a1000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000220000000->0000000224000000 (114688 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff816a1000
(XEN) Init. ramdisk: ffffffff816a1000->ffffffff82de2e00
(XEN) Phys-Mach map: ffffffff82de3000->ffffffff82ee3000
(XEN) Start info: ffffffff82ee3000->ffffffff82ee34b4
(XEN) Page tables: ffffffff82ee4000->ffffffff82eff000
(XEN) Boot stack: ffffffff82eff000->ffffffff82f00000
(XEN) TOTAL: ffffffff80000000->ffffffff83000000
(XEN) ENTRY ADDRESS: ffffffff814f3200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM:
..........................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 180kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.19 (root@jupiter) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Mon Aug 16 15:43:54 CEST 2010
[ 0.000000] Command line: root=/dev/md0 ro console=tty0 console=hvc0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] Xen: 000000000009ec00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
[ 0.000000] Xen: 00000000cbbfa000 - 00000000cbd28000 (reserved)
[ 0.000000] Xen: 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
[ 0.000000] Xen: 00000000cbd3c000 - 00000000cbe43000 (reserved)
[ 0.000000] Xen: 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
[ 0.000000] Xen: 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
[ 0.000000] Xen: 00000000cbe66000 - 00000000cbe88000 (reserved)
[ 0.000000] Xen: 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
[ 0.000000] Xen: 00000000cdc00000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] RAMDISK: 016a1000 - 02de2e00
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000cbe49e18 00064 (v01 INTEL DQ45CB
0000007B MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cbe48d98 000F4 (v04 INTEL A M I
06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! (20090903/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
CBE4CF40/00000000CBE51F40, using 32 (20090903/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000cbe43018 04B53 (v01 INTEL DQ45CB
0000007B INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cbe4cf40 00040
[ 0.000000] ACPI: APIC 00000000cbe48f18 0006C (v02 INTEL DQ45CB
0000007B MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000cbe53e18 0003C (v01 INTEL DQ45CB
0000007B MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000cbe52d18 000A0 (v32 INTEL DQ45CB
0000007B TFSM 000F4240)
[ 0.000000] ACPI: HPET 00000000cbe53d98 00038 (v01 INTEL DQ45CB
0000007B AMI. 00000003)
[ 0.000000] ACPI: SPCR 00000000cbe53d18 00050 (v01 INTEL DQ45CB
0000007B AMI. 00000003)
[ 0.000000] ACPI: TCPA 00000000cbe53c98 00032 (v02 INTEL DQ45CB
0000007B MSFT 01000013)
[ 0.000000] ACPI: 00000000cbbf9d98 00108 (v01 INTEL DQ45CB
0000007B INTL 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000020000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000020000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000013fff] pages 4
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0002ee4000 - 0002eff000] XEN PAGETABLES ==>
[0002ee4000 - 0002eff000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001680514] TEXT DATA BSS ==>
[0001000000 - 0001680514]
[ 0.000000] #4 [00016a1000 - 0002de2e00] RAMDISK ==>
[00016a1000 - 0002de2e00]
[ 0.000000] #5 [0002de3000 - 0002ee4000] XEN START INFO ==>
[0002de3000 - 0002ee4000]
[ 0.000000] #6 [0001681000 - 00016811a8] BRK ==>
[0001681000 - 00016811a8]
[ 0.000000] #7 [0000100000 - 00001e4000] PGTABLE ==>
[0000100000 - 00001e4000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:abb77000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1-rc5 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880002f35000 s90008
r8192 d20584 u118784
[ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 128951
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/md0 ro console=tty0
console=hvc0
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between
ffff880003a06000 - ffff880007a06000
[ 0.000000] DMA: software IO TLB at phys 0x3a06000 - 0x7a06000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880003a06000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880007a66000 size=32768
[ 0.000000] Memory: 417688k/524288k available (3115k kernel code,
392k absent, 106208k reserved, 1859k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c
polarity=1
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2933.514 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5867.02 BogoMIPS (lpj=11734056)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004077] Dentry cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.007323] Inode-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.008000] Mount-cache hash table entries: 256
[ 0.008122] Initializing cgroup subsys ns
[ 0.010973] Initializing cgroup subsys cpuacct
[ 0.012000] Initializing cgroup subsys devices
[ 0.012000] Initializing cgroup subsys freezer
[ 0.012000] Initializing cgroup subsys net_cls
[ 0.012021] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.015384] CPU: L2 cache: 2048K
[ 0.016005] CPU 0/0x0 -> Node 0
[ 0.017322] CPU: Physical Processor ID: 0
[ 0.018994] CPU: Processor Core ID: 0
[ 0.020004] mce: CPU supports 6 MCE banks
[ 0.021735] Performance Events: unsupported p6 CPU model 23 no PMU
driver, software events only.
[ 0.024001] SMP alternatives: switching to UP code
[ 0.028001] ACPI: Core revision 20090903
[ 0.036233] installing Xen timer for CPU 1
[ 0.038038] SMP alternatives: switching to SMP code
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 1/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.040102] Brought up 2 CPUs
[ 0.044036] devtmpfs: initialized
[ 0.047638] Grant table initialized
[ 0.047638] regulator: core version 0.5
[ 0.048036] NET: Registered protocol family 16
[ 0.049983] ACPI: bus type pci registered
[ 0.052066] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[ 0.055071] PCI: Not using MMCONFIG.
[ 0.056001] PCI: Using configuration type 1 for base access
[ 0.056338] bio: create slab <bio-0> at 0
[ 0.058266] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.062347] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.067833] ACPI: BIOS _OSI(Linux) query ignored
[ 0.069997] ACPI: Interpreter enabled
[ 0.071524] ACPI: (supports S0 S3 S4 S5)
[ 0.072001] ACPI: Using IOAPIC for interrupt routing
[ 0.072136] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[ 0.075207] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[ 0.096901] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.106375] ACPI Warning: Incorrect checksum in table [ ] - 6C,
should be B0 (20090903/tbutils-314)
[ 0.108123] ACPI: No dock devices found.
[ 0.110070] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.112246] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.114867] pci 0000:00:03.0: PME# disabled
[ 0.116001] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.116001] pci 0000:00:19.0: PME# disabled
[ 0.116172] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.118848] pci 0000:00:1a.7: PME# disabled
[ 0.120001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.120001] pci 0000:00:1d.7: PME# disabled
[ 0.120330] pci 0000:00:1e.0: transparent bridge
[ 0.134376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.136067] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.139137] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.140066] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.143099] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12
14 15)
[ 0.144066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.147627] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0
[ 0.148066] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.151130] xen_balloon: Initialising balloon driver with page order 0.
[ 0.152001] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.152001] vgaarb: loaded
[ 0.152037] PCI: Using ACPI for IRQ routing
[ 0.154000] Switching to clocksource xen
[ 0.155719] pnp: PnP ACPI init
[ 0.155719] ACPI: bus type pnp registered
[ 0.157935] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.160397] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.162801] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.166148] pnp: PnP ACPI: found 11 devices
[ 0.169280] ACPI: ACPI bus type pnp unregistered
[ 0.172005] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.175004] system 00:01: iomem range 0xfed08000-0xfed08fff has been
reserved
[ 0.175998] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
[ 0.181522] system 00:02: ioport range 0xa20-0xa3f has been reserved
[ 0.184175] system 00:02: ioport range 0xa00-0xa1f has been reserved
[ 0.185514] system 00:02: ioport range 0xb78-0xb7f has been reserved
[ 0.185514] system 00:02: ioport range 0xf78-0xf7f has been reserved
[ 0.194410] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.197653] system 00:09: ioport range 0x400-0x47f has been reserved
[ 0.200838] system 00:09: ioport range 0x1180-0x119f has been reserved
[ 0.201644] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.201644] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.201644] system 00:09: iomem range 0xfec00000-0xfecfffff could not
be reserved
[ 0.201644] system 00:09: iomem range 0xfee00000-0xfee0ffff could not
be reserved
[ 0.201644] system 00:09: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.201644] system 00:09: iomem range 0xfed45000-0xfed9ffff has been
reserved
[ 0.201644] system 00:09: iomem range 0xff000000-0xffffffff has been
reserved
[ 0.233094] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.235880] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.236003] pci 0000:00:1e.0: IO window: disabled
[ 0.236003] pci 0000:00:1e.0: MEM window: disabled
[ 0.236003] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.247720] NET: Registered protocol family 2
[ 0.251172] IP route cache hash table entries: 4096 (order: 3, 32768
bytes)
[ 0.254387] TCP established hash table entries: 16384 (order: 6,
262144 bytes)
[ 0.258438] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.261801] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.262417] TCP reno registered
[ 0.262417] NET: Registered protocol family 1
[ 1.868021] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.468022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.471192] Unpacking initramfs...
[ 3.498686] Freeing initrd memory: 23815k freed
[ 3.509374] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.512015] DMA: Placing 64MB software IO TLB between
ffff880003a06000 - ffff880007a06000
[ 3.512015] DMA: software IO TLB at phys 0x3a06000 - 0x7a06000
[ 3.520579] audit: initializing netlink socket (disabled)
[ 3.522922] type=2000 audit(1282401524.555:1): initialized
[ 3.526164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.530194] VFS: Disk quotas dquot_6.5.2
[ 3.532304] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.535103] msgmni has been set to 862
[ 3.538435] alg: No test for stdrng (krng)
[ 3.540660] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 3.544100] io scheduler noop registered
[ 3.544617] io scheduler anticipatory registered
[ 3.544617] io scheduler deadline registered
[ 3.550889] io scheduler cfq registered (default)
[ 3.556697] registering netback
[ 3.560605] hpet_acpi_add: no address or irqs in _CRS
[ 3.562791] Linux agpgart interface v0.103
[ 3.564558] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 3.569724] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
(XEN) mm.c:860:d0 Error getting mfn 20000 (pfn 5555555555555555) from L1
entry 8000000020000473 for l1e_owner=0, pg_owner=32753
[ 3.594370] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.597333] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.601260] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.604085] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.607665] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 3.610749] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 3.614068] PNP: No PS/2 controller found. Probing ports directly.
[ 3.621724] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.623845] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.626065] mice: PS/2 mouse device common for all mice
[ 3.628369] rtc_cmos 00:05: RTC can wake from S4
[ 3.630391] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.633407] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 3.636446] cpuidle: using governor ladder
[ 3.638160] cpuidle: using governor menu
[ 3.640435] No iBFT detected.
[ 3.640435] TCP cubic registered
[ 3.644730] NET: Registered protocol family 10
[ 3.648048] lo: Disabled Privacy Extensions
[ 3.650007] Mobile IPv6
[ 3.651066] NET: Registered protocol family 17
[ 3.653027] registered taskstats version 1
[ 3.656447] rtc_cmos 00:05: setting system clock to 2010-08-21
14:38:44 UTC (1282401524)
[ 3.661024] Initalizing network drop monitor service
[ 3.663301] Freeing unused kernel memory: 592k freed
[ 3.666114] Write protecting the kernel read-only data: 4252k
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... [ 3.972359] SCSI subsystem
initialized
[ 3.987383] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 3.989008] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.992753] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 4.007303] usbcore: registered new interface driver usbfs
[ 4.009005] usbcore: registered new interface driver hub
[ 4.036723] usbcore: registered new device driver usb
[ 4.043306] 0000:00:19.0: 0000:00:19.0: PHY reset is blocked due to
SOL/IDER session.
[ 4.129379] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.133854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.136608] Warning! ehci_hcd should always be loaded before uhci_hcd
and ohci_hcd, not after
[ 4.328064] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:7e:5d:23
[ 4.332251] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.337295] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
[ 4.340020] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 4.341007] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.346435] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 4.352867] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[ 4.355972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.358863] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.363261] usb usb1: Product: UHCI Host Controller
[ 4.363261] usb usb1: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.363261] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.375770] usb usb1: configuration #1 chosen from 1 choice
[ 4.379219] hub 1-0:1.0: USB hub found
[ 4.380849] hub 1-0:1.0: 2 ports detected
[ 4.383186] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.386787] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.387075] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 2
[ 4.394149] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.405343] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0522000
[ 4.421028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.423479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.425015] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.425015] usb usb2: Product: EHCI Host Controller
[ 4.425015] usb usb2: Manufacturer: Linux 2.6.32.19 ehci_hcd
[ 4.425015] usb usb2: SerialNumber: 0000:00:1a.7
[ 4.438580] usb usb2: configuration #1 chosen from 1 choice
[ 4.442268] hub 2-0:1.0: USB hub found
[ 4.443847] hub 2-0:1.0: 6 ports detected
[ 4.445702] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 4.448745] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.449657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 3
[ 4.456263] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
[ 4.459221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.463195] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.463195] usb usb3: Product: UHCI Host Controller
[ 4.463195] usb usb3: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.463195] usb usb3: SerialNumber: 0000:00:1a.1
[ 4.474960] usb usb3: configuration #1 chosen from 1 choice
[ 4.477318] hub 3-0:1.0: USB hub found
[ 4.479372] hub 3-0:1.0: 2 ports detected
[ 4.481215] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.485177] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.485177] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 4
[ 4.492307] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.498408] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0521000
[ 4.516022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.518471] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.520005] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.520005] usb usb4: Product: EHCI Host Controller
[ 4.520005] usb usb4: Manufacturer: Linux 2.6.32.19 ehci_hcd
[ 4.520005] usb usb4: SerialNumber: 0000:00:1d.7
[ 4.533521] usb usb4: configuration #1 chosen from 1 choice
[ 4.536109] hub 4-0:1.0: USB hub found
[ 4.538858] hub 4-0:1.0: 6 ports detected
[ 4.540863] xen_allocate_pirq: returning irq 18 for gsi 18
[ 4.543219] Already setup the GSI :18
[ 4.544822] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.547215] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.547215] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 4.555876] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080
[ 4.558604] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.562227] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.562741] usb usb5: Product: UHCI Host Controller
[ 4.562741] usb usb5: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.562741] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.574461] usb usb5: configuration #1 chosen from 1 choice
[ 4.583596] hub 5-0:1.0: USB hub found
[ 4.585254] hub 5-0:1.0: 2 ports detected
[ 4.590096] xen_allocate_pirq: returning irq 23 for gsi 23
[ 4.593905] Already setup the GSI :23
[ 4.596050] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.597901] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.597901] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 4.605300] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[ 4.608381] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.609260] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.609260] usb usb6: Product: UHCI Host Controller
[ 4.609260] usb usb6: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.609260] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.622973] usb usb6: configuration #1 chosen from 1 choice
[ 4.625266] hub 6-0:1.0: USB hub found
[ 4.627949] hub 6-0:1.0: 2 ports detected
[ 4.629769] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.632827] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.636133] scsi0 : ata_piix
[ 4.637938] scsi1 : ata_piix
[ 4.640604] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma
0xf170 irq 19
[ 4.641887] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma
0xf178 irq 19
[ 4.648389] xen_allocate_pirq: returning irq 19 for gsi 19
[ 4.651217] Already setup the GSI :19
[ 4.654481] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.657412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.659750] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 4.664386] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[ 4.666901] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.669782] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.670874] usb usb7: Product: UHCI Host Controller
[ 4.670874] usb usb7: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.670874] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.681347] usb usb7: configuration #1 chosen from 1 choice
[ 4.684158] hub 7-0:1.0: USB hub found
[ 4.686950] hub 7-0:1.0: 2 ports detected
[ 4.688855] xen_allocate_pirq: returning irq 19 for gsi 19
[ 4.691239] Already setup the GSI :19
[ 4.692822] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.695235] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.700261] scsi2 : ata_piix
[ 4.701808] scsi3 : ata_piix
[ 4.703083] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma
0xf110 irq 19
[ 4.705760] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma
0xf118 irq 19
[ 4.709623] xen_allocate_pirq: returning irq 18 for gsi 18
[ 4.712543] Already setup the GSI :18
[ 4.713590] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.713590] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.713590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 4.724620] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
[ 4.727127] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.731098] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.731098] usb usb8: Product: UHCI Host Controller
[ 4.731098] usb usb8: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.731098] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.743158] usb usb8: configuration #1 chosen from 1 choice
[ 4.746102] hub 8-0:1.0: USB hub found
[ 4.747693] hub 8-0:1.0: 2 ports detected
[ 5.032006] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.045534] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.448132] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.450866] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 5.453423] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.456100] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 5.460786] ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[ 5.463692] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.468660] ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[ 5.472444] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.476816] ata1.00: configured for UDMA/133
[ 5.478736] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[ 5.486181] ata2.00: configured for UDMA/133
[ 5.488538] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[ 5.541659] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 5.541856] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 5.541913] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.541944] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.542095] sdb:
[ 5.557518] sd 0:0:0:0: [sda] Write Protect is off
[ 5.560217] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.564739] sda: sdb1 sdb2 sdb3
[ 5.569668] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.581752] sda1 sda2 sda3
[ 5.583736] sd 0:0:0:0: [sda] Attached SCSI disk
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top
... Begin: Loading[ 5.802092] md: raid1 personality registered for
level 1
Success: loaded module raid1.
done.
Begin: Assembling all MD arrays ... [ 5.818270] md: md0 stopped.
[ 5.835463] md: bind<sdb1>
[ 5.836855] md: bind<sda1>
[ 5.844695] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.847222] md0: detected capacity change from 0 to 1998585856
mdadm: /dev/md0 has been started with 2 drives.
[ 5.853914] md: md1 stopped.
[ 5.855767] md0: unknown partition table
[ 5.930396] md: bind<sdb2>
[ 5.931826] md: bind<sda2>
[ 5.940841] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.943400] md1: detected capacity change from 0 to 17190748160
mdadm: /dev/md1 has been started with 2 drives.
[ 5.950992] md: md2 stopped.
[ 5.952353] md1: unknown partition table
[ 6.001220] md: bind<sdb3>
[ 6.002725] md: bind<sda3>
[ 6.010482] raid1: md2 is not clean -- starting background reconstruction
[ 6.014473] raid1: raid set md2 active with 2 out of 2 mirrors
[ 6.017005] md2: detected capacity change from 0 to 981012578304
mdadm: /dev/md2 has been started with 2 drives.
[ 6.022926] md2: unknown partition table
Success: assembled all arrays.
done.
Begin: Waiting for udev to process events ... done.
[ 6.094176] device-mapper: uevent: version 1.0.3
[ 6.097386] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com
done.
Begin: Running /scripts/local-premount ... done.
[ 6.144313] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.147116] EXT3-fs: write access will be enabled during recovery.
[ 6.266634] kjournald starting. Commit interval 5 seconds
[ 6.269039] EXT3-fs: recovery complete.
[ 6.271603] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 7.188746] udevd
version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 7.826508] input: Sleep
Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 7.828020] ACPI: Sleep Button [SLPB]
[ 7.836073] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 7.839684] ACPI: Power Button [PWRB]
[ 7.913777] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.932125] xen_allocate_pirq: returning irq 18 for gsi 18
[ 7.934459] Already setup the GSI :18
[ 7.936031] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 7.940447] ACPI: SSDT 00000000cbe4cc18 002CC (v01 AMI IST
00000001 MSFT 03000001)
[ 7.946355] Marking TSC unstable due to TSC halts in idle
[ 7.948697] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 7.951686] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.952663] ACPI: Power Button [PWRF]
[ 7.992562] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 3
[ 7.996488] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 4
[ 8.085694] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 5
[ 8.135080] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 8.161776] Error: Driver 'pcspkr' is already registered, aborting...
(XEN) no cpu_id for acpi_id 6
[ 8.186681] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 7
[ 8.246343] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 8
[ 8.278251] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
done.
RAID status not OK. Exiting. failed!
Setting the system clock.
Activating swap...done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/md0: clean, 36618/122160 files, 254589/487936 blocks
done.
[ 10.433319] EXT3 FS on md0, internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...[ 11.343159] loop: module loaded
done.
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups Reading all physical volumes. This may
take a while...
Found volume group "vgrp1" using metadata type lvm2
36 logical volume(s) in volume group "vgrp1" now active
.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
/dev/md1: recovering journal
/dev/md1: clean, 1999/1050576 files, 162111/4196960 blocks
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...[ 13.112515] kjournald starting. Commit
interval 5 seconds
[ 13.120490] EXT3 FS on md1, internal journal
[ 13.122256] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.317719] md: resync of RAID array md2
[ 13.319320] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 13.321475] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[ 13.321475] md: using 128k window, over a total of 958020096 blocks.
[ 13.440405] kjournald starting. Commit interval 5 seconds
[ 13.508352] EXT3 FS on dm-25, internal journal
[ 13.510329] EXT3-fs: recovery complete.
[ 13.512505] EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...[ 13.572921] Adding 2097144k swap on
/dev/mapper/vgrp1-orion.swap. Priority:-1 extents:1 across:2097144k
done.
Setting up networking....
Configuring network interfaces...Don't seem to be have all the variables
for eth0.100/inet.
Failed to bring up eth0.100.
Don't seem to be have all the variables for eth0.200/inet.
Failed to bring up eth0.200.
[ 14.171235] Bridge firewalling registered
WARNING: Could not open /proc/net/vlan/config. Maybe you need to load
the 8021q module, or maybe you are not using PROCFS??
[ 14.230673] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 14.232010] All bugs added by David S. Miller <davem@redhat.com>
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[ 14.332471] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.336567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 14.342030] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Added VLAN with VID == 100 to IF -:eth0:-
[ 14.352613] device eth0.100 entered promiscuous mode
[ 14.357464] device eth0 entered promiscuous mode
[ 14.368491] xenbr100: port 1(eth0.100) entering learning state
Waiting for xenbr100 to get ready (MAXWAIT is 20 seconds).
[ 23.369074] xenbr100: port 1(eth0.100) entering forwarding state
if-up.d/mountnfs[xenbr100]: waiting for interface eth0.100 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr100]: waiting for interface eth0.200 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr100]: waiting for interface xenbr200 before doing
NFS mounts (warning).
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 200 to IF -:eth0:-
[ 23.698451] device eth0.200 entered promiscuous mode
[ 23.711535] xenbr200: port 1(eth0.200) entering learning state
Waiting for xenbr200 to get ready (MAXWAIT is 20 seconds).
[ 32.712256] xenbr200: port 1(eth0.200) entering forwarding state
if-up.d/mountnfs[xenbr200]: waiting for interface eth0.100 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr200]: waiting for interface eth0.200 before doing
NFS mounts (warning).
done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Loading the saved-state of the serial devices...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
[ 33.587386] ttyS1: LSR safety check engaged!
[ 33.591292] ttyS1: LSR safety check engaged!
/dev/ttyS1 at 0xf1c0 (irq = 17) is a 16550A
Setting sensors limits.
Setting console screen modes and fonts.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.
Starting NFS common utilities: statd.
Starting powernowd: required sysfs objects not found!
Read /usr/share/doc/powernowd/README.Debian for more information.
Not starting S.M.A.R.T. daemon smartd, disabled via
/etc/default/smartmontools (warning).
Starting network management services: snmpd.
Starting Xen daemons:[ 66.387718] Event-channel device installed.
xenfs xenstored xenconsoled xend[ 67.150428] XENBUS: Unable to read
cpu state
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-08-21 13:47 Freeze with 2.6.32.19 and xen-4.0.1rc5 Claus Rosenberger
@ 2010-08-21 14:02 ` Pasi Kärkkäinen
2010-08-21 22:08 ` Claus Rosenberger
2010-08-21 23:04 ` Freeze with 2.6.32.19 and xen-4.0.1rc5 Bruce Edge
2010-12-14 0:59 ` Mark Brown
2 siblings, 1 reply; 25+ messages in thread
From: Pasi Kärkkäinen @ 2010-08-21 14:02 UTC (permalink / raw)
To: Claus Rosenberger; +Cc: xen-devel
On Sat, Aug 21, 2010 at 03:47:57PM +0200, Claus Rosenberger wrote:
> Hi,
>
> i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
> with xen-4.0.1rc5. Due some reason the system freezes from time to time.
> I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
> anything to serial console so there are no errors or something like that.
>
> Perhaps there is something to see from the logs ...
>
Hello,
A couple of questions:
- Do you use PCI passthru?
- Is there something special happening when it freezes?
- Does it freeze at regular intervals, at the same time/uptime, or randomly?
- By freezing you mean it doesn't respond to anything? Or does it reboot?
- Can you try using the old 2.6.31.9 kernel with the new xen hypervisor?
-- Pasi
>
> Configuration Grub
>
> title Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
> root (hd0,0)
> kernel /boot/xen-4.0-amd64.gz dom0_mem=524288 cpufreq=xen
> cpuidle console=com1 com1=115200,8n1,0xf1c0,0 sync_console
Try adding "loglvl=all guest_loglvl=all" for xen.gz.
> module /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0
> console=hvc0
> module /boot/initrd.img-2.6.32.19
>
And try adding "nomodeset" for dom0 kernel (vmlinuz).
-- Pasi
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-08-21 14:02 ` Pasi Kärkkäinen
@ 2010-08-21 22:08 ` Claus Rosenberger
2010-08-23 8:01 ` Claus Rosenberger
0 siblings, 1 reply; 25+ messages in thread
From: Claus Rosenberger @ 2010-08-21 22:08 UTC (permalink / raw)
To: xen-devel
Am 21.08.2010 16:02, schrieb Pasi Kärkkäinen:
> On Sat, Aug 21, 2010 at 03:47:57PM +0200, Claus Rosenberger wrote:
>> Hi,
>>
>> i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
>> with xen-4.0.1rc5. Due some reason the system freezes from time to time.
>> I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
>> anything to serial console so there are no errors or something like that.
>>
>> Perhaps there is something to see from the logs ...
>>
> Hello,
>
> A couple of questions:
>
> - Do you use PCI passthru?
I tried but now i disabled to avoid a mixup of to many issues.
> - Is there something special happening when it freezes?
Last time it happened as creating filesystems, perhaps it's something
about disk usage. At the end of the mail i describe more about the disk
problems.
> - Does it freeze at regular intervals, at the same time/uptime, or randomly?
It happens or not, it's randomly.
> - By freezing you mean it doesn't respond to anything? Or does it reboot?
If it's freezing then i cannot do anything, i can connect with iamt and
reboot, nothing else.
> - Can you try using the old 2.6.31.9 kernel with the new xen hypervisor?
Sure.
> -- Pasi
>
>
>> Configuration Grub
>>
>> title Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
>> root (hd0,0)
>> kernel /boot/xen-4.0-amd64.gz dom0_mem=524288 cpufreq=xen
>> cpuidle console=com1 com1=115200,8n1,0xf1c0,0 sync_console
> Try adding "loglvl=all guest_loglvl=all" for xen.gz.
Sure.
>> module /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0
>> console=hvc0
>> module /boot/initrd.img-2.6.32.19
>>
> And try adding "nomodeset" for dom0 kernel (vmlinuz).
Whats that parameter for?
I switched the disk because there was an error on the last one, now on
sata2 there is a brand new disk and i can see following on my console
log. I cannot believe it's a disk problem, perhaps it's a disk
controller problem instead or there is something with the kernel. I will
add the parameters and switch off/on the machine to restart from scratch.
Claus
[17392.097849] sd 1:0:0:0: [sdb] Unhandled error code
[17392.100047] BUG: soft lockup - CPU#0 stuck for 66s! [swapper:0]
[17392.100049] Modules linked in: nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack xt_physdev iptable_filter ip_tables x_tables
xen_evtchn xenfs 8021q garp bridge stp coretemp lm85 hwmon_vid loop
evdev video output tpm_tis tpm snd_pcsp tpm_bios psmouse snd_pcm
serio_raw snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core
processor button acpi_processor ext3 jbd mbcache dm_mirror
dm_region_hash dm_log dm_snapshot dm_mod raid1 md_mod sd_mod crc_t10dif
ata_piix ehci_hcd uhci_hcd ata_generic libata usbcore nls_base scsi_mod
e1000e thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[17392.100088] CPU 0:
[17392.100089] Modules linked in: nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack xt_physdev iptable_filter ip_tables x_tables
xen_evtchn xenfs 8021q garp bridge stp coretemp lm85 hwmon_vid loop
evdev video output tpm_tis tpm snd_pcsp tpm_bios psmouse snd_pcm
serio_raw snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core
processor button acpi_processor ext3 jbd mbcache dm_mirror
dm_region_hash dm_log dm_snapshot dm_mod raid1 md_mod sd_mod crc_t10dif
ata_piix ehci_hcd uhci_hcd ata_generic libata usbcore nls_base scsi_mod
e1000e thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[17392.100120] Pid: 0, comm: swapper Not tainted 2.6.32.19 #2
[17392.100122] RIP: e030:[<ffffffff8100928a>] [<ffffffff8100928a>]
hypercall_page+0x28a/0x1001
[17392.100129] RSP: e02b:ffff880002f38df8 EFLAGS: 00000a07
[17392.100130] RAX: 0000000000000000 RBX: ffffc900081d2060 RCX:
ffffffff8100928a
[17392.100132] RDX: 0000000000000001 RSI: ffffc900081d51c0 RDI:
0000000000000001
[17392.100134] RBP: ffffc900081d2198 R08: 0000000000000000 R09:
0000000000000000
[17392.100135] R10: 0000000000015640 R11: 0000000000000a07 R12:
0000000000000003
[17392.100137] R13: 0000000000004620 R14: 0000000000000021 R15:
6db6db6db6db6db7
[17392.100142] FS: 00007f3b93f6a6e0(0000) GS:ffff880002f35000(0000)
knlGS:0000000000000000
[17392.100144] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[17392.100145] CR2: 00007f3b93f69000 CR3: 000000001efba000 CR4:
0000000000002660
[17392.100147] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[17392.100149] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[17392.100151] Call Trace:
[17392.100153] <IRQ> [<ffffffff811fd74a>] ? net_tx_action+0x294/0x9be
[17392.100160] [<ffffffff8100eadf>] ? xen_restore_fl_direct_end+0x0/0x1
[17392.100164] [<ffffffff8109786c>] ? check_for_new_grace_period+0x9e/0xa8
[17392.100167] [<ffffffff81052bc3>] ? tasklet_action+0x77/0xd3
[17392.100170] [<ffffffff81054352>] ? __do_softirq+0xe0/0x1a2
[17392.100173] [<ffffffff811ee9ff>] ? __xen_evtchn_do_upcall+0x12a/0x16c
[17392.100176] [<ffffffff81012bec>] ? call_softirq+0x1c/0x30
[17392.100179] [<ffffffff81014813>] ? do_softirq+0x3f/0x7c
[17392.100181] [<ffffffff810541b3>] ? irq_exit+0x36/0x79
[17392.100184] [<ffffffff811eeeb0>] ? xen_evtchn_do_upcall+0x35/0x42
[17392.100186] [<ffffffff81012c3e>] ? xen_do_hypervisor_callback+0x1e/0x30
[17392.100187] <EOI> [<ffffffff810093aa>] ? hypercall_page+0x3aa/0x1001
[17392.100191] [<ffffffff810093aa>] ? hypercall_page+0x3aa/0x1001
[17392.100194] [<ffffffff8100e454>] ? xen_safe_halt+0xc/0x15
[17392.100196] [<ffffffff8100bf15>] ? xen_idle+0x35/0x40
[17392.100199] [<ffffffff81010c13>] ? cpu_idle+0xa3/0xdd
[17392.100203] [<ffffffff814f3cdb>] ? start_kernel+0x3da/0x3e5
[17392.100205] [<ffffffff814f5b83>] ? xen_start_kernel+0x5e6/0x5ea
[17392.103027] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[17392.103031] ata1.00: failed command: READ DMA EXT
[17392.103035] ata1.00: cmd 25/00:00:5d:88:39/00:04:3d:00:00/e0 tag 0
dma 524288 in
[17392.103036] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[17392.103037] ata1.00: status: { DRDY }
[17392.103052] ata1.00: hard resetting link
[17392.372433] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_TIMEOUT
[17392.376416] sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 3d 39 7f dd 00 04
00 00
[17392.380089] end_request: I/O error, dev sdb, sector 1027178461
[17392.384569] raid1: Disk failure on sdb3, disabling device.
[17392.384569] raid1: Operation continuing on 1 devices.
[17392.389710] BUG: soft lockup - CPU#1 stuck for 66s! [scsi_eh_1:538]
[17392.389710] Modules linked in:
[17392.393352] md: md2: resync done.
[17392.393348] nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack
xt_physdev iptable_filter ip_tables x_tables xen_evtchn xenfs 8021q garp
bridge stp coretemp lm85 hwmon_vid loop evdev video output tpm_tis tpm
snd_pcsp tpm_bios psmouse snd_pcm serio_raw snd_timer snd soundcore
snd_page_alloc i2c_i801 i2c_core processor button acpi_processor ext3
jbd mbcache dm_mirror dm_region_hash dm_log dm_snapshot dm_mod raid1
md_mod sd_mod crc_t10dif ata_piix ehci_hcd uhci_hcd ata_generic libata
usbcore nls_base scsi_mod e1000e thermal fan thermal_sys [last unloaded:
scsi_wait_scan]
[17392.420099] CPU 1:
[17392.420099] Modules linked in: nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack xt_physdev iptable_filter ip_tables x_tables
xen_evtchn xenfs 8021q garp bridge stp coretemp lm85 hwmon_vid loop
evdev video output tpm_tis tpm snd_pcsp tpm_bios psmouse snd_pcm
serio_raw snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core
processor button acpi_processor ext3 jbd mbcache dm_mirror
dm_region_hash dm_log dm_snapshot dm_mod raid1 md_mod sd_mod crc_t10dif
ata_piix ehci_hcd uhci_hcd ata_generic libata usbcore nls_base scsi_mod
e1000e thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[17392.448018] Pid: 538, comm: scsi_eh_1 Not tainted 2.6.32.19 #2
[17392.452071] RIP: e030:[<ffffffff8100922a>] [<ffffffff8100922a>]
hypercall_page+0x22a/0x1001
[17392.456082] RSP: e02b:ffff88000205bbc8 EFLAGS: 00000246
[17392.460069] RAX: 0000000000040000 RBX: ffff880002353000 RCX:
ffffffff8100922a
[17392.464074] RDX: 000000000000d729 RSI: 0000000000000000 RDI:
0000000000000000
[17392.464074] RBP: ffff880002312000 R08: 0000000000000001 R09:
00000000000000fa
[17392.468023] R10: ffff88000206d170 R11: 0000000000000246 R12:
ffff880002338000
[17392.468023] R13: ffff880002353048 R14: ffff88001e7f0900 R15:
ffff880002698000
[17392.468023] FS: 00007f3b93f6a6e0(0000) GS:ffff880002f52000(0000)
knlGS:0000000000000000
[17392.472075] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[17392.472075] CR2: 00007f3b9356d1a4 CR3: 000000001f657000 CR4:
0000000000002660
[17392.472075] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[17392.476070] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[17392.476070] Call Trace:
[17392.476070] [<ffffffff8100e41d>] ? xen_force_evtchn_callback+0x9/0xa
[17392.476070] [<ffffffff8100eaf2>] ? check_events+0x12/0x20
[17392.480079] ata1.01: hard resetting link
[17392.480099] [<ffffffff8100ea99>] ? xen_irq_enable_direct_end+0x0/0x7
[17392.480099] [<ffffffffa003a19c>] ? scsi_request_fn+0x3b9/0x4da
[scsi_mod]
[17392.480099] [<ffffffff8117d7b6>] ? __blk_run_queue+0x35/0x66
[17392.484070] [<ffffffff8117d88d>] ? blk_run_queue+0x20/0x32
[17392.484070] [<ffffffffa0039826>] ? scsi_run_queue+0x2da/0x370 [scsi_mod]
[17392.488084] [<ffffffff810e6294>] ? kmem_cache_free+0x71/0xa4
[17392.488084] [<ffffffffa003a4a5>] ? scsi_next_command+0x2d/0x39
[scsi_mod]
[17392.488084] [<ffffffffa003adfc>] ? scsi_io_completion+0x1ed/0x416
[scsi_mod]
[17392.488084] [<ffffffffa0037a7a>] ? scsi_eh_flush_done_q+0xec/0x10d
[scsi_mod]
[17392.488084] [<ffffffffa00a7223>] ? ata_scsi_error+0x5e9/0x681 [libata]
[17392.488084] [<ffffffffa0038a3d>] ? scsi_error_handler+0xec/0x5a9
[scsi_mod]
[17392.496345] [<ffffffffa0038951>] ? scsi_error_handler+0x0/0x5a9
[scsi_mod]
[17392.496345] [<ffffffff810652ad>] ? kthread+0x75/0x7d
[17392.496345] [<ffffffff81012aea>] ? child_rip+0xa/0x20
[17392.496345] [<ffffffff81011ca1>] ? int_ret_from_sys_call+0x7/0x1b
[17392.500072] [<ffffffff8101245d>] ? retint_restore_args+0x5/0x6
[17392.500072] [<ffffffff81012ae0>] ? child_rip+0x0/0x20
[17392.956361] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17392.957486] ata1.01: SATA link down (SStatus 0 SControl 300)
[17392.972769] ata1.00: configured for UDMA/133
[17392.973795] ata1.00: device reported invalid CHS sector 0
[17392.974743] ata1: EH complete
[17393.149020] md: checkpointing resync of md2.
[17393.482545] RAID1 conf printout:
[17393.483122] --- wd:1 rd:2
[17393.483585] disk 0, wo:0, o:1, dev:sda3
[17393.484259] disk 1, wo:1, o:0, dev:sdb3
[17393.492056] RAID1 conf printout:
[17393.492628] --- wd:1 rd:2
[17393.493108] disk 0, wo:0, o:1, dev:sda3
[17393.494841] md: resync of RAID array md2
[17393.495559] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[17393.496573] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[17393.498235] md: using 128k window, over a total of 958020096 blocks.
[17393.498466] md: resuming resync of md2 from checkpoint.
[17393.498466] md: md2: resync done.
[17393.824165] RAID1 conf printout:
[17393.825572] --- wd:1 rd:2
[17393.826761] disk 0, wo:0, o:1, dev:sda3
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-08-21 13:47 Freeze with 2.6.32.19 and xen-4.0.1rc5 Claus Rosenberger
2010-08-21 14:02 ` Pasi Kärkkäinen
@ 2010-08-21 23:04 ` Bruce Edge
2010-12-14 0:59 ` Mark Brown
2 siblings, 0 replies; 25+ messages in thread
From: Bruce Edge @ 2010-08-21 23:04 UTC (permalink / raw)
To: Claus Rosenberger; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 44878 bytes --]
Look for the thread titled:domU and dom0 hung with Xen console interrupt
binding showing in-flight=1
there's a patch from Kier in there that fixed a periodic hang that we was
experiencing.
If you have a serial console and can use the Ctrl-A x 3 trick to get a Xen
console a look at the interrupts, the "(---M)" string is the indicator that
it's possibly the same problem.
-Bruce
On Sat, Aug 21, 2010 at 6:47 AM, Claus Rosenberger <
claus.rosenberger@rocnet.de> wrote:
> Hi,
>
> i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
> with xen-4.0.1rc5. Due some reason the system freezes from time to time.
> I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
> anything to serial console so there are no errors or something like that.
>
> Perhaps there is something to see from the logs ...
>
> Hardware
>
> Board: Intel DQ45CB
> CPU: Pentium(R) Dual-Core CPU E6500 @ 2.93GHz
> Memory: AENEON/Qimonda 4 x 2GB 800Mhz
> Disks: WDC 1TB (2x) as software raid-1
>
> Configuration Grub
>
> title Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
> root (hd0,0)
> kernel /boot/xen-4.0-amd64.gz dom0_mem=524288 cpufreq=xen
> cpuidle console=com1 com1=115200,8n1,0xf1c0,0 sync_console
> module /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0
> console=hvc0
> module /boot/initrd.img-2.6.32.19
>
> Console output while starting
>
> (XEN) Xen version 4.0.1-rc5 (Debian 4.0.1~rc5-1) (waldi@debian.org) (gcc
> version 4.3.2 (Debian 4.3.2-1.1) ) Sat Aug 14 21:41:28 CEST 2010
> (XEN) Console output is synchronous.
> (XEN) Command line: dom0_mem=524288 cpufreq=xen cpuidle console=com1
> com1=115200,8n1,0xf1c0,0 sync_console
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN) EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN) Found 2 MBR signatures
> (XEN) Found 2 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009ec00 (usable)
> (XEN) 000000000009ec00 - 00000000000a0000 (reserved)
> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000cbb77000 (usable)
> (XEN) 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
> (XEN) 00000000cbbfa000 - 00000000cbd28000 (reserved)
> (XEN) 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
> (XEN) 00000000cbd3c000 - 00000000cbe43000 (reserved)
> (XEN) 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
> (XEN) 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
> (XEN) 00000000cbe66000 - 00000000cbe88000 (reserved)
> (XEN) 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
> (XEN) 00000000cbe8e000 - 00000000cc000000 (usable)
> (XEN) 00000000cdc00000 - 00000000d0000000 (reserved)
> (XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
> (XEN) 00000000ff000000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 000000022c000000 (usable)
> (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
> (XEN) ACPI: XSDT CBE49E18, 0064 (r1 INTEL DQ45CB 7B MSFT 10013)
> (XEN) ACPI: FACP CBE48D98, 00F4 (r4 INTEL A M I 6222004 MSFT 10013)
> (XEN) ACPI: DSDT CBE43018, 4B53 (r1 INTEL DQ45CB 7B INTL 20051117)
> (XEN) ACPI: FACS CBE51F40, 0040
> (XEN) ACPI: APIC CBE48F18, 006C (r2 INTEL DQ45CB 7B MSFT 10013)
> (XEN) ACPI: MCFG CBE53E18, 003C (r1 INTEL DQ45CB 7B MSFT 97)
> (XEN) ACPI: ASF! CBE52D18, 00A0 (r32 INTEL DQ45CB 7B TFSM
> F4240)
> (XEN) ACPI: HPET CBE53D98, 0038 (r1 INTEL DQ45CB 7B AMI. 3)
> (XEN) ACPI: SPCR CBE53D18, 0050 (r1 INTEL DQ45CB 7B AMI. 3)
> (XEN) ACPI: TCPA CBE53C98, 0032 (r2 INTEL DQ45CB 7B MSFT 1000013)
> (XEN) ACPI: DMAR CBBF9D98, 0108 (r1 INTEL DQ45CB 7B INTL 1)
> (XEN) System RAM: 8060MB (8253980kB)
> (XEN) Domain heap initialised
> (XEN) ACPI: 32/64X FACS address mismatch in FADT -
> cbe4cf40/00000000cbe51f40, using 32
> (XEN) Processor #0 7:7 APIC version 20
> (XEN) Processor #1 7:7 APIC version 20
> (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2933.515 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) VMX: Supported advanced features:
> (XEN) - APIC MMIO access virtualisation
> (XEN) - APIC TPR shadow
> (XEN) - Virtual NMI
> (XEN) - MSR direct-access bitmap
> (XEN) HVM: ASIDs disabled.
> (XEN) HVM: VMX enabled
> (XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003
> (XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003
> (XEN) Intel VT-d Snoop Control not supported.
> (XEN) Intel VT-d DMA Passthrough not supported.
> (XEN) Intel VT-d Queued Invalidation not supported.
> (XEN) Intel VT-d Interrupt Remapping not supported.
> (XEN) I/O virtualisation enabled
> (XEN) - Dom0 mode: Relaxed
> (XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) checking TSC synchronization across 2 CPUs: passed.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Allocated console ring of 16 KiB.
> (XEN) Brought up 2 CPUs
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen kernel: 64-bit, lsb, compat32
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16a1000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000220000000->0000000224000000 (114688 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff81000000->ffffffff816a1000
> (XEN) Init. ramdisk: ffffffff816a1000->ffffffff82de2e00
> (XEN) Phys-Mach map: ffffffff82de3000->ffffffff82ee3000
> (XEN) Start info: ffffffff82ee3000->ffffffff82ee34b4
> (XEN) Page tables: ffffffff82ee4000->ffffffff82eff000
> (XEN) Boot stack: ffffffff82eff000->ffffffff82f00000
> (XEN) TOTAL: ffffffff80000000->ffffffff83000000
> (XEN) ENTRY ADDRESS: ffffffff814f3200
> (XEN) Dom0 has maximum 2 VCPUs
> (XEN) Scrubbing Free RAM:
>
> ..........................................................................done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) **********************************************
> (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
> (XEN) ******* This option is intended to aid debugging of Xen by ensuring
> (XEN) ******* that all output is synchronously delivered on the serial
> line.
> (XEN) ******* However it can introduce SIGNIFICANT latencies and affect
> (XEN) ******* timekeeping. It is NOT recommended for production use!
> (XEN) **********************************************
> (XEN) 3... 2... 1...
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> input to Xen)
> (XEN) Freed 180kB init memory.
> mapping kernel into physical memory
> Xen: setup ISA identity maps
> about to get started...
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.32.19 (root@jupiter) (gcc version 4.4.3
> (Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Mon Aug 16 15:43:54 CEST 2010
> [ 0.000000] Command line: root=/dev/md0 ro console=tty0 console=hvc0
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] released 0 pages of unused memory
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] Xen: 0000000000000000 - 000000000009ec00 (usable)
> [ 0.000000] Xen: 000000000009ec00 - 0000000000100000 (reserved)
> [ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
> [ 0.000000] Xen: 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
> [ 0.000000] Xen: 00000000cbbfa000 - 00000000cbd28000 (reserved)
> [ 0.000000] Xen: 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
> [ 0.000000] Xen: 00000000cbd3c000 - 00000000cbe43000 (reserved)
> [ 0.000000] Xen: 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
> [ 0.000000] Xen: 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
> [ 0.000000] Xen: 00000000cbe66000 - 00000000cbe88000 (reserved)
> [ 0.000000] Xen: 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
> [ 0.000000] Xen: 00000000cdc00000 - 00000000d0000000 (reserved)
> [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
> [ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
> [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
> 0x7010600070106
> [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
> [ 0.000000] RAMDISK: 016a1000 - 02de2e00
> [ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
> [ 0.000000] ACPI: XSDT 00000000cbe49e18 00064 (v01 INTEL DQ45CB
> 0000007B MSFT 00010013)
> [ 0.000000] ACPI: FACP 00000000cbe48d98 000F4 (v04 INTEL A M I
> 06222004 MSFT 00010013)
> [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
> FACS tables! (20090903/tbfadt-369)
> [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
> CBE4CF40/00000000CBE51F40, using 32 (20090903/tbfadt-486)
> [ 0.000000] ACPI: DSDT 00000000cbe43018 04B53 (v01 INTEL DQ45CB
> 0000007B INTL 20051117)
> [ 0.000000] ACPI: FACS 00000000cbe4cf40 00040
> [ 0.000000] ACPI: APIC 00000000cbe48f18 0006C (v02 INTEL DQ45CB
> 0000007B MSFT 00010013)
> [ 0.000000] ACPI: MCFG 00000000cbe53e18 0003C (v01 INTEL DQ45CB
> 0000007B MSFT 00000097)
> [ 0.000000] ACPI: ASF! 00000000cbe52d18 000A0 (v32 INTEL DQ45CB
> 0000007B TFSM 000F4240)
> [ 0.000000] ACPI: HPET 00000000cbe53d98 00038 (v01 INTEL DQ45CB
> 0000007B AMI. 00000003)
> [ 0.000000] ACPI: SPCR 00000000cbe53d18 00050 (v01 INTEL DQ45CB
> 0000007B AMI. 00000003)
> [ 0.000000] ACPI: TCPA 00000000cbe53c98 00032 (v02 INTEL DQ45CB
> 0000007B MSFT 01000013)
> [ 0.000000] ACPI: 00000000cbbf9d98 00108 (v01 INTEL DQ45CB
> 0000007B INTL 00000001)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-0000000020000000
> [ 0.000000] Bootmem setup node 0 0000000000000000-0000000020000000
> [ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
> [ 0.000000] bootmap [0000000000010000 - 0000000000013fff] pages 4
> [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
> [0000000000 - 0000001000]
> [ 0.000000] #1 [0002ee4000 - 0002eff000] XEN PAGETABLES ==>
> [0002ee4000 - 0002eff000]
> [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
> [0000006000 - 0000008000]
> [ 0.000000] #3 [0001000000 - 0001680514] TEXT DATA BSS ==>
> [0001000000 - 0001680514]
> [ 0.000000] #4 [00016a1000 - 0002de2e00] RAMDISK ==>
> [00016a1000 - 0002de2e00]
> [ 0.000000] #5 [0002de3000 - 0002ee4000] XEN START INFO ==>
> [0002de3000 - 0002ee4000]
> [ 0.000000] #6 [0001681000 - 00016811a8] BRK ==>
> [0001681000 - 00016811a8]
> [ 0.000000] #7 [0000100000 - 00001e4000] PGTABLE ==>
> [0000100000 - 00001e4000]
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00100000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009e
> [ 0.000000] 0: 0x00000100 -> 0x00020000
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
> [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-0
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
> 000000000009f000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
> 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
> 20000000:abb77000)
> [ 0.000000] Booting paravirtualized kernel on Xen
> [ 0.000000] Xen version: 4.0.1-rc5 (preserve-AD) (dom0)
> [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880002f35000 s90008
> r8192 d20584 u118784
> [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1
> [ 0.000000] Xen: using vcpu_info placement
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
> Total pages: 128951
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line: root=/dev/md0 ro console=tty0
> console=hvc0
> [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] DMA: Placing 64MB software IO TLB between
> ffff880003a06000 - ffff880007a06000
> [ 0.000000] DMA: software IO TLB at phys 0x3a06000 - 0x7a06000
> [ 0.000000] xen_swiotlb_fixup: buf=ffff880003a06000 size=67108864
> [ 0.000000] xen_swiotlb_fixup: buf=ffff880007a66000 size=32768
> [ 0.000000] Memory: 417688k/524288k available (3115k kernel code,
> 392k absent, 106208k reserved, 1859k data, 592k init)
> [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=2, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:4352 nr_irqs:768
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c
> polarity=1
> [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
> [ 0.000000] xen: acpi sci 9
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [hvc0] enabled
> [ 0.000000] installing Xen timer for CPU 0
> [ 0.000000] Detected 2933.514 MHz processor.
> [ 0.004000] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 5867.02 BogoMIPS (lpj=11734056)
> [ 0.004000] Security Framework initialized
> [ 0.004000] SELinux: Disabled at boot.
> [ 0.004077] Dentry cache hash table entries: 65536 (order: 7, 524288
> bytes)
> [ 0.007323] Inode-cache hash table entries: 32768 (order: 6, 262144
> bytes)
> [ 0.008000] Mount-cache hash table entries: 256
> [ 0.008122] Initializing cgroup subsys ns
> [ 0.010973] Initializing cgroup subsys cpuacct
> [ 0.012000] Initializing cgroup subsys devices
> [ 0.012000] Initializing cgroup subsys freezer
> [ 0.012000] Initializing cgroup subsys net_cls
> [ 0.012021] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.015384] CPU: L2 cache: 2048K
> [ 0.016005] CPU 0/0x0 -> Node 0
> [ 0.017322] CPU: Physical Processor ID: 0
> [ 0.018994] CPU: Processor Core ID: 0
> [ 0.020004] mce: CPU supports 6 MCE banks
> [ 0.021735] Performance Events: unsupported p6 CPU model 23 no PMU
> driver, software events only.
> [ 0.024001] SMP alternatives: switching to UP code
> [ 0.028001] ACPI: Core revision 20090903
> [ 0.036233] installing Xen timer for CPU 1
> [ 0.038038] SMP alternatives: switching to SMP code
> [ 0.004000] Initializing CPU#1
> [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.004000] CPU: L2 cache: 2048K
> [ 0.004000] CPU 1/0x0 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.040102] Brought up 2 CPUs
> [ 0.044036] devtmpfs: initialized
> [ 0.047638] Grant table initialized
> [ 0.047638] regulator: core version 0.5
> [ 0.048036] NET: Registered protocol family 16
> [ 0.049983] ACPI: bus type pci registered
> [ 0.052066] PCI: MCFG configuration 0: base f0000000 segment 0 buses
> 0 - 127
> [ 0.055071] PCI: Not using MMCONFIG.
> [ 0.056001] PCI: Using configuration type 1 for base access
> [ 0.056338] bio: create slab <bio-0> at 0
> [ 0.058266] ERROR: Unable to locate IOAPIC for GSI 9
> [ 0.062347] ACPI: Executed 1 blocks of module-level executable AML code
> [ 0.067833] ACPI: BIOS _OSI(Linux) query ignored
> [ 0.069997] ACPI: Interpreter enabled
> [ 0.071524] ACPI: (supports S0 S3 S4 S5)
> [ 0.072001] ACPI: Using IOAPIC for interrupt routing
> [ 0.072136] PCI: MCFG configuration 0: base f0000000 segment 0 buses
> 0 - 127
> [ 0.075207] PCI: MCFG area at f0000000 reserved in ACPI motherboard
> resources
> [ 0.096901] PCI: Using MMCONFIG at f0000000 - f7ffffff
> [ 0.106375] ACPI Warning: Incorrect checksum in table [ ] - 6C,
> should be B0 (20090903/tbutils-314)
> [ 0.108123] ACPI: No dock devices found.
> [ 0.110070] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.112246] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> [ 0.114867] pci 0000:00:03.0: PME# disabled
> [ 0.116001] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> [ 0.116001] pci 0000:00:19.0: PME# disabled
> [ 0.116172] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.118848] pci 0000:00:1a.7: PME# disabled
> [ 0.120001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.120001] pci 0000:00:1d.7: PME# disabled
> [ 0.120330] pci 0000:00:1e.0: transparent bridge
> [ 0.134376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
> 14 15)
> [ 0.136067] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12
> 14 15)
> [ 0.139137] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12
> 14 15)
> [ 0.140066] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12
> 14 15)
> [ 0.143099] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12
> 14 15)
> [ 0.144066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12
> 14 15)
> [ 0.147627] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
> 14 15) *0
> [ 0.148066] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
> 14 15)
> [ 0.151130] xen_balloon: Initialising balloon driver with page order 0.
> [ 0.152001] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.152001] vgaarb: loaded
> [ 0.152037] PCI: Using ACPI for IRQ routing
> [ 0.154000] Switching to clocksource xen
> [ 0.155719] pnp: PnP ACPI init
> [ 0.155719] ACPI: bus type pnp registered
> [ 0.157935] xen_allocate_pirq: returning irq 4 for gsi 4
> [ 0.160397] xen_allocate_pirq: returning irq 8 for gsi 8
> [ 0.162801] xen_allocate_pirq: returning irq 13 for gsi 13
> [ 0.166148] pnp: PnP ACPI: found 11 devices
> [ 0.169280] ACPI: ACPI bus type pnp unregistered
> [ 0.172005] system 00:01: iomem range 0xfed14000-0xfed19fff has been
> reserved
> [ 0.175004] system 00:01: iomem range 0xfed08000-0xfed08fff has been
> reserved
> [ 0.175998] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
> reserved
> [ 0.181522] system 00:02: ioport range 0xa20-0xa3f has been reserved
> [ 0.184175] system 00:02: ioport range 0xa00-0xa1f has been reserved
> [ 0.185514] system 00:02: ioport range 0xb78-0xb7f has been reserved
> [ 0.185514] system 00:02: ioport range 0xf78-0xf7f has been reserved
> [ 0.194410] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.197653] system 00:09: ioport range 0x400-0x47f has been reserved
> [ 0.200838] system 00:09: ioport range 0x1180-0x119f has been reserved
> [ 0.201644] system 00:09: ioport range 0x500-0x57f has been reserved
> [ 0.201644] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
> reserved
> [ 0.201644] system 00:09: iomem range 0xfec00000-0xfecfffff could not
> be reserved
> [ 0.201644] system 00:09: iomem range 0xfee00000-0xfee0ffff could not
> be reserved
> [ 0.201644] system 00:09: iomem range 0xfed20000-0xfed3ffff has been
> reserved
> [ 0.201644] system 00:09: iomem range 0xfed45000-0xfed9ffff has been
> reserved
> [ 0.201644] system 00:09: iomem range 0xff000000-0xffffffff has been
> reserved
> [ 0.233094] PM-Timer failed consistency check (0x0xffffff) - aborting.
> [ 0.235880] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
> [ 0.236003] pci 0000:00:1e.0: IO window: disabled
> [ 0.236003] pci 0000:00:1e.0: MEM window: disabled
> [ 0.236003] pci 0000:00:1e.0: PREFETCH window: disabled
> [ 0.247720] NET: Registered protocol family 2
> [ 0.251172] IP route cache hash table entries: 4096 (order: 3, 32768
> bytes)
> [ 0.254387] TCP established hash table entries: 16384 (order: 6,
> 262144 bytes)
> [ 0.258438] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
> [ 0.261801] TCP: Hash tables configured (established 16384 bind 16384)
> [ 0.262417] TCP reno registered
> [ 0.262417] NET: Registered protocol family 1
> [ 1.868021] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
> 01010001
> [ 3.468022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
> 01010001
> [ 3.471192] Unpacking initramfs...
> [ 3.498686] Freeing initrd memory: 23815k freed
> [ 3.509374] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 3.512015] DMA: Placing 64MB software IO TLB between
> ffff880003a06000 - ffff880007a06000
> [ 3.512015] DMA: software IO TLB at phys 0x3a06000 - 0x7a06000
> [ 3.520579] audit: initializing netlink socket (disabled)
> [ 3.522922] type=2000 audit(1282401524.555:1): initialized
> [ 3.526164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 3.530194] VFS: Disk quotas dquot_6.5.2
> [ 3.532304] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 3.535103] msgmni has been set to 862
> [ 3.538435] alg: No test for stdrng (krng)
> [ 3.540660] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 253)
> [ 3.544100] io scheduler noop registered
> [ 3.544617] io scheduler anticipatory registered
> [ 3.544617] io scheduler deadline registered
> [ 3.550889] io scheduler cfq registered (default)
> [ 3.556697] registering netback
> [ 3.560605] hpet_acpi_add: no address or irqs in _CRS
> [ 3.562791] Linux agpgart interface v0.103
> [ 3.564558] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
> [ 3.569724] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
> (XEN) mm.c:860:d0 Error getting mfn 20000 (pfn 5555555555555555) from L1
> entry 8000000020000473 for l1e_owner=0, pg_owner=32753
> [ 3.594370] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
> 0xd0000000
> [ 3.597333] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 3.601260] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 3.604085] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 3.607665] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) ->
> IRQ 17
> [ 3.610749] input: Macintosh mouse button emulation as
> /devices/virtual/input/input0
> [ 3.614068] PNP: No PS/2 controller found. Probing ports directly.
> [ 3.621724] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 3.623845] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 3.626065] mice: PS/2 mouse device common for all mice
> [ 3.628369] rtc_cmos 00:05: RTC can wake from S4
> [ 3.630391] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> [ 3.633407] rtc0: alarms up to one year, y3k, 114 bytes nvram
> [ 3.636446] cpuidle: using governor ladder
> [ 3.638160] cpuidle: using governor menu
> [ 3.640435] No iBFT detected.
> [ 3.640435] TCP cubic registered
> [ 3.644730] NET: Registered protocol family 10
> [ 3.648048] lo: Disabled Privacy Extensions
> [ 3.650007] Mobile IPv6
> [ 3.651066] NET: Registered protocol family 17
> [ 3.653027] registered taskstats version 1
> [ 3.656447] rtc_cmos 00:05: setting system clock to 2010-08-21
> 14:38:44 UTC (1282401524)
> [ 3.661024] Initalizing network drop monitor service
> [ 3.663301] Freeing unused kernel memory: 592k freed
> [ 3.666114] Write protecting the kernel read-only data: 4252k
> Loading, please wait...
> Begin: Loading essential drivers ... done.
> Begin: Running /scripts/init-premount ... [ 3.972359] SCSI subsystem
> initialized
> [ 3.987383] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
> [ 3.989008] e1000e: Copyright (c) 1999-2008 Intel Corporation.
> [ 3.992753] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
> IRQ 20
> [ 4.007303] usbcore: registered new interface driver usbfs
> [ 4.009005] usbcore: registered new interface driver hub
> [ 4.036723] usbcore: registered new device driver usb
> [ 4.043306] 0000:00:19.0: 0000:00:19.0: PHY reset is blocked due to
> SOL/IDER session.
> [ 4.129379] uhci_hcd: USB Universal Host Controller Interface driver
> [ 4.133854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 4.136608] Warning! ehci_hcd should always be loaded before uhci_hcd
> and ohci_hcd, not after
> [ 4.328064] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
> 00:1c:c0:7e:5d:23
> [ 4.332251] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
> [ 4.337295] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
> [ 4.340020] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 4.341007] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 4.346435] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
> bus number 1
> [ 4.352867] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
> [ 4.355972] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 4.358863] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 4.363261] usb usb1: Product: UHCI Host Controller
> [ 4.363261] usb usb1: Manufacturer: Linux 2.6.32.19 uhci_hcd
> [ 4.363261] usb usb1: SerialNumber: 0000:00:1a.0
> [ 4.375770] usb usb1: configuration #1 chosen from 1 choice
> [ 4.379219] hub 1-0:1.0: USB hub found
> [ 4.380849] hub 1-0:1.0: 2 ports detected
> [ 4.383186] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
> -> IRQ 18
> [ 4.386787] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 4.387075] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
> bus number 2
> [ 4.394149] ehci_hcd 0000:00:1a.7: debug port 1
> [ 4.405343] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0522000
> [ 4.421028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 4.423479] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 4.425015] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 4.425015] usb usb2: Product: EHCI Host Controller
> [ 4.425015] usb usb2: Manufacturer: Linux 2.6.32.19 ehci_hcd
> [ 4.425015] usb usb2: SerialNumber: 0000:00:1a.7
> [ 4.438580] usb usb2: configuration #1 chosen from 1 choice
> [ 4.442268] hub 2-0:1.0: USB hub found
> [ 4.443847] hub 2-0:1.0: 6 ports detected
> [ 4.445702] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
> -> IRQ 21
> [ 4.448745] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 4.449657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
> bus number 3
> [ 4.456263] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
> [ 4.459221] usb usb3: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 4.463195] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 4.463195] usb usb3: Product: UHCI Host Controller
> [ 4.463195] usb usb3: Manufacturer: Linux 2.6.32.19 uhci_hcd
> [ 4.463195] usb usb3: SerialNumber: 0000:00:1a.1
> [ 4.474960] usb usb3: configuration #1 chosen from 1 choice
> [ 4.477318] hub 3-0:1.0: USB hub found
> [ 4.479372] hub 3-0:1.0: 2 ports detected
> [ 4.481215] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
> -> IRQ 23
> [ 4.485177] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 4.485177] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
> bus number 4
> [ 4.492307] ehci_hcd 0000:00:1d.7: debug port 1
> [ 4.498408] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0521000
> [ 4.516022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 4.518471] usb usb4: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 4.520005] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 4.520005] usb usb4: Product: EHCI Host Controller
> [ 4.520005] usb usb4: Manufacturer: Linux 2.6.32.19 ehci_hcd
> [ 4.520005] usb usb4: SerialNumber: 0000:00:1d.7
> [ 4.533521] usb usb4: configuration #1 chosen from 1 choice
> [ 4.536109] hub 4-0:1.0: USB hub found
> [ 4.538858] hub 4-0:1.0: 6 ports detected
> [ 4.540863] xen_allocate_pirq: returning irq 18 for gsi 18
> [ 4.543219] Already setup the GSI :18
> [ 4.544822] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
> -> IRQ 18
> [ 4.547215] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> [ 4.547215] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
> bus number 5
> [ 4.555876] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080
> [ 4.558604] usb usb5: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 4.562227] usb usb5: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 4.562741] usb usb5: Product: UHCI Host Controller
> [ 4.562741] usb usb5: Manufacturer: Linux 2.6.32.19 uhci_hcd
> [ 4.562741] usb usb5: SerialNumber: 0000:00:1a.2
> [ 4.574461] usb usb5: configuration #1 chosen from 1 choice
> [ 4.583596] hub 5-0:1.0: USB hub found
> [ 4.585254] hub 5-0:1.0: 2 ports detected
> [ 4.590096] xen_allocate_pirq: returning irq 23 for gsi 23
> [ 4.593905] Already setup the GSI :23
> [ 4.596050] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
> -> IRQ 23
> [ 4.597901] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 4.597901] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> bus number 6
> [ 4.605300] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
> [ 4.608381] usb usb6: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 4.609260] usb usb6: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 4.609260] usb usb6: Product: UHCI Host Controller
> [ 4.609260] usb usb6: Manufacturer: Linux 2.6.32.19 uhci_hcd
> [ 4.609260] usb usb6: SerialNumber: 0000:00:1d.0
> [ 4.622973] usb usb6: configuration #1 chosen from 1 choice
> [ 4.625266] hub 6-0:1.0: USB hub found
> [ 4.627949] hub 6-0:1.0: 2 ports detected
> [ 4.629769] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
> -> IRQ 19
> [ 4.632827] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
> [ 4.636133] scsi0 : ata_piix
> [ 4.637938] scsi1 : ata_piix
> [ 4.640604] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma
> 0xf170 irq 19
> [ 4.641887] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma
> 0xf178 irq 19
> [ 4.648389] xen_allocate_pirq: returning irq 19 for gsi 19
> [ 4.651217] Already setup the GSI :19
> [ 4.654481] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
> -> IRQ 19
> [ 4.657412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 4.659750] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> bus number 7
> [ 4.664386] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
> [ 4.666901] usb usb7: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 4.669782] usb usb7: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 4.670874] usb usb7: Product: UHCI Host Controller
> [ 4.670874] usb usb7: Manufacturer: Linux 2.6.32.19 uhci_hcd
> [ 4.670874] usb usb7: SerialNumber: 0000:00:1d.1
> [ 4.681347] usb usb7: configuration #1 chosen from 1 choice
> [ 4.684158] hub 7-0:1.0: USB hub found
> [ 4.686950] hub 7-0:1.0: 2 ports detected
> [ 4.688855] xen_allocate_pirq: returning irq 19 for gsi 19
> [ 4.691239] Already setup the GSI :19
> [ 4.692822] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
> -> IRQ 19
> [ 4.695235] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> [ 4.700261] scsi2 : ata_piix
> [ 4.701808] scsi3 : ata_piix
> [ 4.703083] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma
> 0xf110 irq 19
> [ 4.705760] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma
> 0xf118 irq 19
> [ 4.709623] xen_allocate_pirq: returning irq 18 for gsi 18
> [ 4.712543] Already setup the GSI :18
> [ 4.713590] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
> -> IRQ 18
> [ 4.713590] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 4.713590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
> bus number 8
> [ 4.724620] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
> [ 4.727127] usb usb8: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 4.731098] usb usb8: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 4.731098] usb usb8: Product: UHCI Host Controller
> [ 4.731098] usb usb8: Manufacturer: Linux 2.6.32.19 uhci_hcd
> [ 4.731098] usb usb8: SerialNumber: 0000:00:1d.2
> [ 4.743158] usb usb8: configuration #1 chosen from 1 choice
> [ 4.746102] hub 8-0:1.0: USB hub found
> [ 4.747693] hub 8-0:1.0: 2 ports detected
> [ 5.032006] ata4: SATA link down (SStatus 0 SControl 300)
> [ 5.045534] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5.448132] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 5.450866] ata1.01: SATA link down (SStatus 0 SControl 300)
> [ 5.453423] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 5.456100] ata2.01: SATA link down (SStatus 0 SControl 300)
> [ 5.460786] ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max
> UDMA/133
> [ 5.463692] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
> 0/32)
> [ 5.468660] ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max
> UDMA/133
> [ 5.472444] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
> 0/32)
> [ 5.476816] ata1.00: configured for UDMA/133
> [ 5.478736] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
> 03.0 PQ: 0 ANSI: 5
> [ 5.486181] ata2.00: configured for UDMA/133
> [ 5.488538] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
> 03.0 PQ: 0 ANSI: 5
> [ 5.541659] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
> (1.00 TB/931 GiB)
> [ 5.541856] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks:
> (1.00 TB/931 GiB)
> [ 5.541913] sd 1:0:0:0: [sdb] Write Protect is off
> [ 5.541944] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 5.542095] sdb:
> [ 5.557518] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.560217] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 5.564739] sda: sdb1 sdb2 sdb3
> [ 5.569668] sd 1:0:0:0: [sdb] Attached SCSI disk
> [ 5.581752] sda1 sda2 sda3
> [ 5.583736] sd 0:0:0:0: [sda] Attached SCSI disk
> done.
> Begin: Mounting root file system ... Begin: Running /scripts/local-top
> ... Begin: Loading[ 5.802092] md: raid1 personality registered for
> level 1
> Success: loaded module raid1.
> done.
> Begin: Assembling all MD arrays ... [ 5.818270] md: md0 stopped.
> [ 5.835463] md: bind<sdb1>
> [ 5.836855] md: bind<sda1>
> [ 5.844695] raid1: raid set md0 active with 2 out of 2 mirrors
> [ 5.847222] md0: detected capacity change from 0 to 1998585856
> mdadm: /dev/md0 has been started with 2 drives.
> [ 5.853914] md: md1 stopped.
> [ 5.855767] md0: unknown partition table
> [ 5.930396] md: bind<sdb2>
> [ 5.931826] md: bind<sda2>
> [ 5.940841] raid1: raid set md1 active with 2 out of 2 mirrors
> [ 5.943400] md1: detected capacity change from 0 to 17190748160
> mdadm: /dev/md1 has been started with 2 drives.
> [ 5.950992] md: md2 stopped.
> [ 5.952353] md1: unknown partition table
> [ 6.001220] md: bind<sdb3>
> [ 6.002725] md: bind<sda3>
> [ 6.010482] raid1: md2 is not clean -- starting background
> reconstruction
> [ 6.014473] raid1: raid set md2 active with 2 out of 2 mirrors
> [ 6.017005] md2: detected capacity change from 0 to 981012578304
> mdadm: /dev/md2 has been started with 2 drives.
> [ 6.022926] md2: unknown partition table
> Success: assembled all arrays.
> done.
> Begin: Waiting for udev to process events ... done.
> [ 6.094176] device-mapper: uevent: version 1.0.3
> [ 6.097386] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
> initialised: dm-devel@redhat.com
> done.
> Begin: Running /scripts/local-premount ... done.
> [ 6.144313] EXT3-fs: INFO: recovery required on readonly filesystem.
> [ 6.147116] EXT3-fs: write access will be enabled during recovery.
> [ 6.266634] kjournald starting. Commit interval 5 seconds
> [ 6.269039] EXT3-fs: recovery complete.
> [ 6.271603] EXT3-fs: mounted filesystem with ordered data mode.
> Begin: Running /scripts/local-bottom ... done.
> done.
> Begin: Running /scripts/init-bottom ... done.
> INIT: version 2.86 booting
> Starting the hotplug events dispatcher: udevd[ 7.188746] udevd
> version 125 started
> .
> Synthesizing the initial hotplug events...done.
> Waiting for /dev to be fully populated...[ 7.826508] input: Sleep
> Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
> [ 7.828020] ACPI: Sleep Button [SLPB]
> [ 7.836073] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
> [ 7.839684] ACPI: Power Button [PWRB]
> [ 7.913777] input: PC Speaker as /devices/platform/pcspkr/input/input3
> [ 7.932125] xen_allocate_pirq: returning irq 18 for gsi 18
> [ 7.934459] Already setup the GSI :18
> [ 7.936031] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
> -> IRQ 18
> [ 7.940447] ACPI: SSDT 00000000cbe4cc18 002CC (v01 AMI IST
> 00000001 MSFT 03000001)
> [ 7.946355] Marking TSC unstable due to TSC halts in idle
> [ 7.948697] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 7.951686] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
> [ 7.952663] ACPI: Power Button [PWRF]
> [ 7.992562] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> (XEN) no cpu_id for acpi_id 3
> [ 7.996488] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> (XEN) no cpu_id for acpi_id 4
> [ 8.085694] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> (XEN) no cpu_id for acpi_id 5
> [ 8.135080] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 8.161776] Error: Driver 'pcspkr' is already registered, aborting...
> (XEN) no cpu_id for acpi_id 6
> [ 8.186681] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> (XEN) no cpu_id for acpi_id 7
> [ 8.246343] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> (XEN) no cpu_id for acpi_id 8
> [ 8.278251] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> done.
> RAID status not OK. Exiting. failed!
> Setting the system clock.
> Activating swap...done.
> Checking root file system...fsck 1.41.3 (12-Oct-2008)
> /dev/md0: clean, 36618/122160 files, 254589/487936 blocks
> done.
> [ 10.433319] EXT3 FS on md0, internal journal
> Setting the system clock.
> Cleaning up ifupdown....
> Loading kernel modules...[ 11.343159] loop: module loaded
> done.
> Generating udev events for MD arrays...done.
> Setting up LVM Volume Groups Reading all physical volumes. This may
> take a while...
> Found volume group "vgrp1" using metadata type lvm2
> 36 logical volume(s) in volume group "vgrp1" now active
> .
> Checking file systems...fsck 1.41.3 (12-Oct-2008)
> /dev/md1: recovering journal
> /dev/md1: clean, 1999/1050576 files, 162111/4196960 blocks
> done.
> Setting kernel variables (/etc/sysctl.conf)...done.
> Mounting local filesystems...[ 13.112515] kjournald starting. Commit
> interval 5 seconds
> [ 13.120490] EXT3 FS on md1, internal journal
> [ 13.122256] EXT3-fs: mounted filesystem with ordered data mode.
> [ 13.317719] md: resync of RAID array md2
> [ 13.319320] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
> [ 13.321475] md: using maximum available idle IO bandwidth (but not
> more than 200000 KB/sec) for resync.
> [ 13.321475] md: using 128k window, over a total of 958020096 blocks.
> [ 13.440405] kjournald starting. Commit interval 5 seconds
> [ 13.508352] EXT3 FS on dm-25, internal journal
> [ 13.510329] EXT3-fs: recovery complete.
> [ 13.512505] EXT3-fs: mounted filesystem with ordered data mode.
> done.
> Activating swapfile swap...[ 13.572921] Adding 2097144k swap on
> /dev/mapper/vgrp1-orion.swap. Priority:-1 extents:1 across:2097144k
> done.
> Setting up networking....
> Configuring network interfaces...Don't seem to be have all the variables
> for eth0.100/inet.
> Failed to bring up eth0.100.
> Don't seem to be have all the variables for eth0.200/inet.
> Failed to bring up eth0.200.
> [ 14.171235] Bridge firewalling registered
> WARNING: Could not open /proc/net/vlan/config. Maybe you need to load
> the 8021q module, or maybe you are not using PROCFS??
> [ 14.230673] 802.1Q VLAN Support v1.8 Ben Greear <
> greearb@candelatech.com>
> [ 14.232010] All bugs added by David S. Miller <davem@redhat.com>
> Set name-type for VLAN subsystem. Should be visible in
> /proc/net/vlan/config
> [ 14.332471] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 14.336567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
> Control: None
> [ 14.342030] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> Added VLAN with VID == 100 to IF -:eth0:-
> [ 14.352613] device eth0.100 entered promiscuous mode
> [ 14.357464] device eth0 entered promiscuous mode
> [ 14.368491] xenbr100: port 1(eth0.100) entering learning state
>
> Waiting for xenbr100 to get ready (MAXWAIT is 20 seconds).
> [ 23.369074] xenbr100: port 1(eth0.100) entering forwarding state
> if-up.d/mountnfs[xenbr100]: waiting for interface eth0.100 before doing
> NFS mounts (warning).
> if-up.d/mountnfs[xenbr100]: waiting for interface eth0.200 before doing
> NFS mounts (warning).
> if-up.d/mountnfs[xenbr100]: waiting for interface xenbr200 before doing
> NFS mounts (warning).
> Set name-type for VLAN subsystem. Should be visible in
> /proc/net/vlan/config
> Added VLAN with VID == 200 to IF -:eth0:-
> [ 23.698451] device eth0.200 entered promiscuous mode
> [ 23.711535] xenbr200: port 1(eth0.200) entering learning state
>
> Waiting for xenbr200 to get ready (MAXWAIT is 20 seconds).
> [ 32.712256] xenbr200: port 1(eth0.200) entering forwarding state
> if-up.d/mountnfs[xenbr200]: waiting for interface eth0.100 before doing
> NFS mounts (warning).
> if-up.d/mountnfs[xenbr200]: waiting for interface eth0.200 before doing
> NFS mounts (warning).
> done.
> Starting portmap daemon....
> Starting NFS common utilities: statd.
> Loading the saved-state of the serial devices...
> /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
> [ 33.587386] ttyS1: LSR safety check engaged!
> [ 33.591292] ttyS1: LSR safety check engaged!
> /dev/ttyS1 at 0xf1c0 (irq = 17) is a 16550A
> Setting sensors limits.
> Setting console screen modes and fonts.
> INIT: Entering runlevel: 2
> Starting enhanced syslogd: rsyslogd.
> Starting OpenBSD Secure Shell server: sshd.
> Starting MTA: exim4.
> Starting NFS common utilities: statd.
> Starting powernowd: required sysfs objects not found!
> Read /usr/share/doc/powernowd/README.Debian for more information.
> Not starting S.M.A.R.T. daemon smartd, disabled via
> /etc/default/smartmontools (warning).
> Starting network management services: snmpd.
> Starting Xen daemons:[ 66.387718] Event-channel device installed.
> xenfs xenstored xenconsoled xend[ 67.150428] XENBUS: Unable to read
> cpu state
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: Type: text/html, Size: 48567 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-08-21 22:08 ` Claus Rosenberger
@ 2010-08-23 8:01 ` Claus Rosenberger
2010-08-23 11:09 ` Pasi Kärkkäinen
0 siblings, 1 reply; 25+ messages in thread
From: Claus Rosenberger @ 2010-08-23 8:01 UTC (permalink / raw)
To: xen-devel
Am 22.08.2010 00:08, schrieb Claus Rosenberger:
> Am 21.08.2010 16:02, schrieb Pasi Kärkkäinen:
>> On Sat, Aug 21, 2010 at 03:47:57PM +0200, Claus Rosenberger wrote:
>>> Hi,
>>>
>>> i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
>>> with xen-4.0.1rc5. Due some reason the system freezes from time to time.
>>> I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
>>> anything to serial console so there are no errors or something like that.
>>>
>>> Perhaps there is something to see from the logs ...
>>>
I did some tests and get a configuration working
title Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
root (hd0,0)
kernel /boot/xen-4.0-amd64.gz dom0_mem=524288 console=com1 com1=115200,8n1,0xf1c0,0 sync_console
loglvl=all guest_loglvl=all acpi=ht noapic noirqbalance
module /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0 console=hvc0 nomodeset
module /boot/initrd.img-2.6.32.19
With "acpi=ht noapic noirqbalance" it seems to be stable.
Without that options i get freezes soon after rebooting but there are no logs an the serial output.
Kernel 2.6.31.14 didn't work as well and the other working kernel without that acpi options is
2.6.31.9 but thats not a pvops kernel.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-08-23 8:01 ` Claus Rosenberger
@ 2010-08-23 11:09 ` Pasi Kärkkäinen
2010-08-23 12:29 ` Pasi Kärkkäinen
0 siblings, 1 reply; 25+ messages in thread
From: Pasi Kärkkäinen @ 2010-08-23 11:09 UTC (permalink / raw)
To: Claus Rosenberger; +Cc: xen-devel
On Mon, Aug 23, 2010 at 10:01:06AM +0200, Claus Rosenberger wrote:
> Am 22.08.2010 00:08, schrieb Claus Rosenberger:
> > Am 21.08.2010 16:02, schrieb Pasi Kärkkäinen:
> >> On Sat, Aug 21, 2010 at 03:47:57PM +0200, Claus Rosenberger wrote:
> >>> Hi,
> >>>
> >>> i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
> >>> with xen-4.0.1rc5. Due some reason the system freezes from time to time.
> >>> I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
> >>> anything to serial console so there are no errors or something like that.
> >>>
> >>> Perhaps there is something to see from the logs ...
> >>>
>
>
>
> I did some tests and get a configuration working
>
> title Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
> root (hd0,0)
> kernel /boot/xen-4.0-amd64.gz dom0_mem=524288 console=com1 com1=115200,8n1,0xf1c0,0 sync_console
> loglvl=all guest_loglvl=all acpi=ht noapic noirqbalance
> module /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0 console=hvc0 nomodeset
> module /boot/initrd.img-2.6.32.19
>
>
> With "acpi=ht noapic noirqbalance" it seems to be stable.
>
> Without that options i get freezes soon after rebooting but there are no logs an the serial output.
> Kernel 2.6.31.14 didn't work as well and the other working kernel without that acpi options is
> 2.6.31.9 but thats not a pvops kernel.
>
Does someone have ideas why the system would silently lockup (freeze)
without those "acpi=ht noapic noirqbalance" options?
Afaik this is an Intel DQ45CB motherboard, which has been used by many people/developers.
-- Pasi
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-08-23 11:09 ` Pasi Kärkkäinen
@ 2010-08-23 12:29 ` Pasi Kärkkäinen
2010-08-24 7:50 ` Claus Rosenberger
0 siblings, 1 reply; 25+ messages in thread
From: Pasi Kärkkäinen @ 2010-08-23 12:29 UTC (permalink / raw)
To: Claus Rosenberger; +Cc: xen-devel
On Mon, Aug 23, 2010 at 02:09:28PM +0300, Pasi Kärkkäinen wrote:
> On Mon, Aug 23, 2010 at 10:01:06AM +0200, Claus Rosenberger wrote:
> > Am 22.08.2010 00:08, schrieb Claus Rosenberger:
> > > Am 21.08.2010 16:02, schrieb Pasi Kärkkäinen:
> > >> On Sat, Aug 21, 2010 at 03:47:57PM +0200, Claus Rosenberger wrote:
> > >>> Hi,
> > >>>
> > >>> i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
> > >>> with xen-4.0.1rc5. Due some reason the system freezes from time to time.
> > >>> I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
> > >>> anything to serial console so there are no errors or something like that.
> > >>>
> > >>> Perhaps there is something to see from the logs ...
> > >>>
> >
> >
> >
> > I did some tests and get a configuration working
> >
> > title Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
> > root (hd0,0)
> > kernel /boot/xen-4.0-amd64.gz dom0_mem=524288 console=com1 com1=115200,8n1,0xf1c0,0 sync_console
> > loglvl=all guest_loglvl=all acpi=ht noapic noirqbalance
> > module /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0 console=hvc0 nomodeset
> > module /boot/initrd.img-2.6.32.19
> >
> >
> > With "acpi=ht noapic noirqbalance" it seems to be stable.
> >
> > Without that options i get freezes soon after rebooting but there are no logs an the serial output.
> > Kernel 2.6.31.14 didn't work as well and the other working kernel without that acpi options is
> > 2.6.31.9 but thats not a pvops kernel.
> >
>
> Does someone have ideas why the system would silently lockup (freeze)
> without those "acpi=ht noapic noirqbalance" options?
>
> Afaik this is an Intel DQ45CB motherboard, which has been used by many people/developers.
>
Oh, one more thing..
Claus: Please try those options separately,
to figure out which one of those is the important one.
-- Pasi
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-08-23 12:29 ` Pasi Kärkkäinen
@ 2010-08-24 7:50 ` Claus Rosenberger
2010-08-24 8:16 ` Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems Pasi Kärkkäinen
0 siblings, 1 reply; 25+ messages in thread
From: Claus Rosenberger @ 2010-08-24 7:50 UTC (permalink / raw)
To: xen-devel
>>> 2.6.31.9 but thats not a pvops kernel.
>>>
>>
>> Does someone have ideas why the system would silently lockup (freeze)
>> without those "acpi=ht noapic noirqbalance" options?
>>
>> Afaik this is an Intel DQ45CB motherboard, which has been used by many people/developers.
>>
>
> Oh, one more thing..
>
> Claus: Please try those options separately,
> to figure out which one of those is the important one.
>
> -- Pasi
>
I checked out these options, following result
- acpi=ht noapic => worked
- noapic => didn't work, disk errors while booting, no functional system
- acpi=ht apic=debug => worked
So it seems i definitly need the option acpi=ht or acpi=off or something like that.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-08-24 7:50 ` Claus Rosenberger
@ 2010-08-24 8:16 ` Pasi Kärkkäinen
2010-08-24 8:49 ` Jeremy Fitzhardinge
0 siblings, 1 reply; 25+ messages in thread
From: Pasi Kärkkäinen @ 2010-08-24 8:16 UTC (permalink / raw)
To: Claus Rosenberger; +Cc: Jeremy Fitzhardinge, xen-devel, Keir Fraser
On Tue, Aug 24, 2010 at 09:50:19AM +0200, Claus Rosenberger wrote:
> >>> 2.6.31.9 but thats not a pvops kernel.
> >>>
> >>
> >> Does someone have ideas why the system would silently lockup (freeze)
> >> without those "acpi=ht noapic noirqbalance" options?
> >>
> >> Afaik this is an Intel DQ45CB motherboard, which has been used by many people/developers.
> >>
> >
> > Oh, one more thing..
> >
> > Claus: Please try those options separately,
> > to figure out which one of those is the important one.
> >
> > -- Pasi
> >
>
>
> I checked out these options, following result
>
> - acpi=ht noapic => worked
> - noapic => didn't work, disk errors while booting, no functional system
> - acpi=ht apic=debug => worked
>
> So it seems i definitly need the option acpi=ht or acpi=off or something like that.
>
Keir, Jeremy: Any idea why acpi=ht is needed to make Intel DQ45CB (Q45 chipset) work?
Without "acpi=ht" the system freezes randomly without any log/debug/serialconsole output..
-- Pasi
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-08-24 8:16 ` Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems Pasi Kärkkäinen
@ 2010-08-24 8:49 ` Jeremy Fitzhardinge
2010-08-24 23:22 ` Claus Rosenberger
0 siblings, 1 reply; 25+ messages in thread
From: Jeremy Fitzhardinge @ 2010-08-24 8:49 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: xen-devel, Claus Rosenberger, Keir Fraser
On 08/24/2010 01:16 AM, Pasi Kärkkäinen wrote:
> On Tue, Aug 24, 2010 at 09:50:19AM +0200, Claus Rosenberger wrote:
>>>>> 2.6.31.9 but thats not a pvops kernel.
>>>>>
>>>> Does someone have ideas why the system would silently lockup (freeze)
>>>> without those "acpi=ht noapic noirqbalance" options?
>>>>
>>>> Afaik this is an Intel DQ45CB motherboard, which has been used by many people/developers.
>>>>
>>> Oh, one more thing..
>>>
>>> Claus: Please try those options separately,
>>> to figure out which one of those is the important one.
>>>
>>> -- Pasi
>>>
>>
>> I checked out these options, following result
>>
>> - acpi=ht noapic => worked
>> - noapic => didn't work, disk errors while booting, no functional system
>> - acpi=ht apic=debug => worked
>>
>> So it seems i definitly need the option acpi=ht or acpi=off or something like that.
>>
> Keir, Jeremy: Any idea why acpi=ht is needed to make Intel DQ45CB (Q45 chipset) work?
>
> Without "acpi=ht" the system freezes randomly without any log/debug/serialconsole output..
At a random guess, there's something strange about the SCI interrupt.
When booting native, does "acpi" get irq 9 or something else? Is there
a BIOS setting relating to SCI or ACPI interrupts?
J
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-08-24 8:49 ` Jeremy Fitzhardinge
@ 2010-08-24 23:22 ` Claus Rosenberger
2010-08-25 8:02 ` Claus Rosenberger
0 siblings, 1 reply; 25+ messages in thread
From: Claus Rosenberger @ 2010-08-24 23:22 UTC (permalink / raw)
To: xen-devel
I checked out these options, following result
>>> - acpi=ht noapic => worked
>>> - noapic => didn't work, disk errors while booting, no functional system
>>> - acpi=ht apic=debug => worked
>>>
>>> So it seems i definitly need the option acpi=ht or acpi=off or something like that.
>>>
>> Keir, Jeremy: Any idea why acpi=ht is needed to make Intel DQ45CB (Q45 chipset) work?
>>
>> Without "acpi=ht" the system freezes randomly without any log/debug/serialconsole output..
> At a random guess, there's something strange about the SCI interrupt.
> When booting native, does "acpi" get irq 9 or something else? Is there
> a BIOS setting relating to SCI or ACPI interrupts?
>
The kernel was running native without that problems, i attached dmesg. I
didn't find any BIOS options like that.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.19 (root@jupiter) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Mon Aug 16 15:43:54 CEST 2010
[ 0.000000] Command line: root=/dev/md0 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cbb77000 (usable)
[ 0.000000] BIOS-e820: 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbbfa000 - 00000000cbd28000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbd3c000 - 00000000cbe43000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbe66000 - 00000000cbe88000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbe8e000 - 00000000cc000000 (usable)
[ 0.000000] BIOS-e820: 00000000cdc00000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x22c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 22C000000 mask FFC000000 uncachable
[ 0.000000] 6 base 230000000 mask FF0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000cc000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cc000000
[ 0.000000] 0000000000 - 00cc000000 page 2M
[ 0.000000] kernel direct mapping tables up to cc000000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022c000000
[ 0.000000] 0100000000 - 022c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 22c000000 @ b000-15000
[ 0.000000] RAMDISK: 3779a000 - 37fefed1
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000cbe49e18 00064 (v01 INTEL DQ45CB
0000007B MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cbe48d98 000F4 (v04 INTEL A M I
06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! (20090903/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
CBE4CF40/00000000CBE51F40, using 32 (20090903/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000cbe43018 04B53 (v01 INTEL DQ45CB
0000007B INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cbe4cf40 00040
[ 0.000000] ACPI: APIC 00000000cbe48f18 0006C (v02 INTEL DQ45CB
0000007B MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000cbe53e18 0003C (v01 INTEL DQ45CB
0000007B MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000cbe52d18 000A0 (v32 INTEL DQ45CB
0000007B TFSM 000F4240)
[ 0.000000] ACPI: HPET 00000000cbe53d98 00038 (v01 INTEL DQ45CB
0000007B AMI. 00000003)
[ 0.000000] ACPI: SPCR 00000000cbe53d18 00050 (v01 INTEL DQ45CB
0000007B AMI. 00000003)
[ 0.000000] ACPI: TCPA 00000000cbe53c98 00032 (v02 INTEL DQ45CB
0000007B MSFT 01000013)
[ 0.000000] ACPI: DMAR 00000000cbbf9d98 00108 (v01 INTEL DQ45CB
0000007B INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022c000000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000022c000000
[ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 000000000005d7ff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 022c000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001680514] TEXT DATA BSS ==>
[0001000000 - 0001680514]
[ 0.000000] #3 [003779a000 - 0037fefed1] RAMDISK ==>
[003779a000 - 0037fefed1]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==>
[000009ec00 - 0000100000]
[ 0.000000] #5 [0001681000 - 00016811a8] BRK ==>
[0001681000 - 00016811a8]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==>
[0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 0000010000] PGTABLE ==>
[000000b000 - 0000010000]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->
[ffff880001800000-ffff8800089fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cbb77
[ 0.000000] 0: 0x000cbe8e -> 0x000cc000
[ 0.000000] 0: 0x00100000 -> 0x0022c000
[ 0.000000] On node 0 totalpages: 2063495
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3834 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 816417 pages, LIFO batch:31
[ 0.000000] Normal zone: 16800 pages used for memmap
[ 0.000000] Normal zone: 1212000 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cbb77000 -
00000000cbbfa000
[ 0.000000] PM: Registered nosave memory: 00000000cbbfa000 -
00000000cbd28000
[ 0.000000] PM: Registered nosave memory: 00000000cbd28000 -
00000000cbd3c000
[ 0.000000] PM: Registered nosave memory: 00000000cbd3c000 -
00000000cbe43000
[ 0.000000] PM: Registered nosave memory: 00000000cbe43000 -
00000000cbe4b000
[ 0.000000] PM: Registered nosave memory: 00000000cbe4b000 -
00000000cbe66000
[ 0.000000] PM: Registered nosave memory: 00000000cbe66000 -
00000000cbe88000
[ 0.000000] PM: Registered nosave memory: 00000000cbe88000 -
00000000cbe8e000
[ 0.000000] PM: Registered nosave memory: 00000000cc000000 -
00000000cdc00000
[ 0.000000] PM: Registered nosave memory: 00000000cdc00000 -
00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:2ed1c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880008c00000 s90008
r8192 d20584 u524288
[ 0.000000] pcpu-alloc: s90008 r8192 d20584 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2032251
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8055172k/9109504k available (3115k kernel code,
855524k absent, 198808k reserved, 1859k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 25 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 26 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 27 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 8 timers in total, 4 timers will be used for
per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2933.058 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5866.11 BogoMIPS (lpj=11732232)
[ 0.004021] Security Framework initialized
[ 0.004026] SELinux: Disabled at boot.
[ 0.004492] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.010819] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.012409] Mount-cache hash table entries: 256
[ 0.012534] Initializing cgroup subsys ns
[ 0.012538] Initializing cgroup subsys cpuacct
[ 0.012540] Initializing cgroup subsys devices
[ 0.012542] Initializing cgroup subsys freezer
[ 0.012543] Initializing cgroup subsys net_cls
[ 0.012562] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012563] CPU: L2 cache: 2048K
[ 0.012566] CPU 0/0x0 -> Node 0
[ 0.012568] CPU: Physical Processor ID: 0
[ 0.012569] CPU: Processor Core ID: 0
[ 0.012571] mce: CPU supports 6 MCE banks
[ 0.012577] CPU0: Thermal monitoring enabled (TM2)
[ 0.012580] using mwait in idle threads.
[ 0.012582] Performance Events: Core2 events, Intel PMU driver.
[ 0.012586] ... version: 2
[ 0.012587] ... bit width: 40
[ 0.012588] ... generic registers: 2
[ 0.012589] ... value mask: 000000ffffffffff
[ 0.012591] ... max period: 000000007fffffff
[ 0.012592] ... fixed-purpose events: 3
[ 0.012593] ... event mask: 0000000700000003
[ 0.013398] ACPI: Core revision 20090903
[ 0.020038] DMAR: Host address width 36
[ 0.020040] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.020045] IOMMU fed91000: ver 1:0 cap c0000020630272 ecap 1000
[ 0.020047] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[ 0.020052] IOMMU fed92000: ver 1:0 cap c0000020630272 ecap 1000
[ 0.020054] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.020057] IOMMU fed93000: ver 1:0 cap c9008020630272 ecap 1000
[ 0.020059] DMAR: RMRR base: 0x000000cbe27000 end: 0x000000cbe3bfff
[ 0.020062] DMAR: RMRR base: 0x000000cdc00000 end: 0x000000cfffffff
[ 0.020063] DMAR: No ATSR found
[ 0.020071] Setting APIC routing to flat
[ 0.020392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060076] CPU0: Intel Pentium(R) Dual-Core CPU E6500 @
2.93GHz stepping 0a
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.148055] CPU1: Intel Pentium(R) Dual-Core CPU E6500 @
2.93GHz stepping 0a
[ 0.148061] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152015] Brought up 2 CPUs
[ 0.152017] Total of 2 processors activated (11732.86 BogoMIPS).
[ 0.152402] CPU0 attaching sched-domain:
[ 0.152405] domain 0: span 0-1 level MC
[ 0.152407] groups: 0 1
[ 0.152412] CPU1 attaching sched-domain:
[ 0.152413] domain 0: span 0-1 level MC
[ 0.152414] groups: 1 0
[ 0.152482] devtmpfs: initialized
[ 0.154350] regulator: core version 0.5
[ 0.154350] NET: Registered protocol family 16
[ 0.154350] ACPI: bus type pci registered
[ 0.154350] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[ 0.154350] PCI: Not using MMCONFIG.
[ 0.154350] PCI: Using configuration type 1 for base access
[ 0.154350] bio: create slab <bio-0> at 0
[ 0.156151] ACPI: EC: Look up EC in DSDT
[ 0.157316] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.159726] ACPI: BIOS _OSI(Linux) query ignored
[ 0.161138] ACPI: Interpreter enabled
[ 0.161140] ACPI: (supports S0 S3 S4 S5)
[ 0.161154] ACPI: Using IOAPIC for interrupt routing
[ 0.161253] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[ 0.161308] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[ 0.165761] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.170381] ACPI: No dock devices found.
[ 0.170564] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.170626] pci 0000:00:02.0: reg 10 64bit mmio: [0xe0000000-0xe03fffff]
[ 0.170631] pci 0000:00:02.0: reg 18 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.170634] pci 0000:00:02.0: reg 20 io port: [0xf220-0xf227]
[ 0.170658] pci 0000:00:02.1: reg 10 64bit mmio: [0xe0400000-0xe04fffff]
[ 0.170713] pci 0000:00:03.0: reg 10 64bit mmio: [0xe0525000-0xe052500f]
[ 0.170761] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.170765] pci 0000:00:03.0: PME# disabled
[ 0.170789] pci 0000:00:03.2: reg 10 io port: [0xf210-0xf217]
[ 0.170792] pci 0000:00:03.2: reg 14 io port: [0xf200-0xf203]
[ 0.170796] pci 0000:00:03.2: reg 18 io port: [0xf1f0-0xf1f7]
[ 0.170799] pci 0000:00:03.2: reg 1c io port: [0xf1e0-0xf1e3]
[ 0.170802] pci 0000:00:03.2: reg 20 io port: [0xf1d0-0xf1df]
[ 0.170844] pci 0000:00:03.3: reg 10 io port: [0xf1c0-0xf1c7]
[ 0.170848] pci 0000:00:03.3: reg 14 32bit mmio: [0xe0524000-0xe0524fff]
[ 0.170923] pci 0000:00:19.0: reg 10 32bit mmio: [0xe0500000-0xe051ffff]
[ 0.170928] pci 0000:00:19.0: reg 14 32bit mmio: [0xe0523000-0xe0523fff]
[ 0.170933] pci 0000:00:19.0: reg 18 io port: [0xf0e0-0xf0ff]
[ 0.170964] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.170967] pci 0000:00:19.0: PME# disabled
[ 0.171008] pci 0000:00:1a.0: reg 20 io port: [0xf0c0-0xf0df]
[ 0.171064] pci 0000:00:1a.1: reg 20 io port: [0xf0a0-0xf0bf]
[ 0.171122] pci 0000:00:1a.2: reg 20 io port: [0xf080-0xf09f]
[ 0.171182] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe0522000-0xe05223ff]
[ 0.171227] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.171231] pci 0000:00:1a.7: PME# disabled
[ 0.171275] pci 0000:00:1d.0: reg 20 io port: [0xf060-0xf07f]
[ 0.171332] pci 0000:00:1d.1: reg 20 io port: [0xf040-0xf05f]
[ 0.171390] pci 0000:00:1d.2: reg 20 io port: [0xf020-0xf03f]
[ 0.171451] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0521000-0xe05213ff]
[ 0.171496] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.171500] pci 0000:00:1d.7: PME# disabled
[ 0.171643] pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7]
[ 0.171648] pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3]
[ 0.171652] pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197]
[ 0.171657] pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183]
[ 0.171661] pci 0000:00:1f.2: reg 20 io port: [0xf170-0xf17f]
[ 0.171665] pci 0000:00:1f.2: reg 24 io port: [0xf160-0xf16f]
[ 0.171703] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe0520000-0xe05200ff]
[ 0.171714] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[ 0.171750] pci 0000:00:1f.5: reg 10 io port: [0xf150-0xf157]
[ 0.171754] pci 0000:00:1f.5: reg 14 io port: [0xf140-0xf143]
[ 0.171758] pci 0000:00:1f.5: reg 18 io port: [0xf130-0xf137]
[ 0.171763] pci 0000:00:1f.5: reg 1c io port: [0xf120-0xf123]
[ 0.171767] pci 0000:00:1f.5: reg 20 io port: [0xf110-0xf11f]
[ 0.171772] pci 0000:00:1f.5: reg 24 io port: [0xf100-0xf10f]
[ 0.171835] pci 0000:00:1e.0: transparent bridge
[ 0.171848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.171953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.178034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.178107] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.178180] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.178251] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.178324] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12
14 15)
[ 0.178396] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.178469] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0
[ 0.178541] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.178621] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178629] vgaarb: loaded
[ 0.178651] PCI: Using ACPI for IRQ routing
[ 0.178651] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
[ 0.178651] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.184018] hpet: hpet2 irq 24 for MSI
[ 0.184023] hpet: hpet3 irq 25 for MSI
[ 0.184032] Switching to clocksource tsc
[ 0.184910] pnp: PnP ACPI init
[ 0.184917] ACPI: bus type pnp registered
[ 0.186635] pnp: PnP ACPI: found 11 devices
[ 0.186637] ACPI: ACPI bus type pnp unregistered
[ 0.186644] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.186646] system 00:01: iomem range 0xfed08000-0xfed08fff has been
reserved
[ 0.186648] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
[ 0.186652] system 00:02: ioport range 0xa20-0xa3f has been reserved
[ 0.186654] system 00:02: ioport range 0xa00-0xa1f has been reserved
[ 0.186656] system 00:02: ioport range 0xb78-0xb7f has been reserved
[ 0.186658] system 00:02: ioport range 0xf78-0xf7f has been reserved
[ 0.186662] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.186666] system 00:09: ioport range 0x400-0x47f has been reserved
[ 0.186668] system 00:09: ioport range 0x1180-0x119f has been reserved
[ 0.186670] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.186672] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.186674] system 00:09: iomem range 0xfec00000-0xfecfffff could not
be reserved
[ 0.186676] system 00:09: iomem range 0xfee00000-0xfee0ffff has been
reserved
[ 0.186678] system 00:09: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.186680] system 00:09: iomem range 0xfed45000-0xfed9ffff has been
reserved
[ 0.186682] system 00:09: iomem range 0xff000000-0xffffffff has been
reserved
[ 0.191380] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.191381] pci 0000:00:1e.0: IO window: disabled
[ 0.191385] pci 0000:00:1e.0: MEM window: disabled
[ 0.191388] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.191397] pci 0000:00:1e.0: setting latency timer to 64
[ 0.191400] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.191402] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.191404] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.191406] pci_bus 0000:01: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.191429] NET: Registered protocol family 2
[ 0.191604] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.192783] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.195906] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.196317] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.196320] TCP reno registered
[ 0.196426] NET: Registered protocol family 1
[ 0.196449] pci 0000:00:02.0: Boot video device
[ 1.796014] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.396014] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.396188] Unpacking initramfs...
[ 3.535334] Freeing initrd memory: 8535k freed
[ 3.538245] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.538250] DMA: Placing 64MB software IO TLB between
ffff880008d9d000 - ffff88000cd9d000
[ 3.538251] DMA: software IO TLB at phys 0x8d9d000 - 0xcd9d000
[ 3.538560] audit: initializing netlink socket (disabled)
[ 3.538571] type=2000 audit(1282670447.536:1): initialized
[ 3.539129] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.540167] VFS: Disk quotas dquot_6.5.2
[ 3.540206] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.540266] msgmni has been set to 15749
[ 3.540397] alg: No test for stdrng (krng)
[ 3.540431] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 3.540434] io scheduler noop registered
[ 3.540435] io scheduler anticipatory registered
[ 3.540437] io scheduler deadline registered
[ 3.540458] io scheduler cfq registered (default)
[ 3.541519] Linux agpgart interface v0.103
[ 3.541532] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 3.542076] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 3.558107] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.558143] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.558236] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.558460] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.558547] alloc irq_desc for 17 on node -1
[ 3.558549] alloc kstat_irqs on node -1
[ 3.558555] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 3.558602] 0000:00:03.3: ttyS1 at I/O 0xf1c0 (irq = 17) is a 16550A
[ 3.558666] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 3.558715] PNP: No PS/2 controller found. Probing ports directly.
[ 3.563431] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.563435] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.563509] mice: PS/2 mouse device common for all mice
[ 3.563548] rtc_cmos 00:05: RTC can wake from S4
[ 3.563577] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.563600] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.563608] cpuidle: using governor ladder
[ 3.563609] cpuidle: using governor menu
[ 3.563612] No iBFT detected.
[ 3.563842] TCP cubic registered
[ 3.563934] NET: Registered protocol family 10
[ 3.564253] lo: Disabled Privacy Extensions
[ 3.564442] Mobile IPv6
[ 3.564444] NET: Registered protocol family 17
[ 3.564500] PM: Resume from disk failed.
[ 3.564511] registered taskstats version 1
[ 3.564803] rtc_cmos 00:05: setting system clock to 2010-08-24
17:20:48 UTC (1282670448)
[ 3.564838] Initalizing network drop monitor service
[ 3.564855] Freeing unused kernel memory: 592k freed
[ 3.564961] Write protecting the kernel read-only data: 4252k
[ 3.802712] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 3.802714] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.802758] alloc irq_desc for 20 on node -1
[ 3.802759] alloc kstat_irqs on node -1
[ 3.802767] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 3.802775] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.802861] alloc irq_desc for 28 on node -1
[ 3.802862] alloc kstat_irqs on node -1
[ 3.802871] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 3.804679] SCSI subsystem initialized
[ 3.814913] 0000:00:19.0: 0000:00:19.0: PHY reset is blocked due to
SOL/IDER session.
[ 3.820476] usbcore: registered new interface driver usbfs
[ 3.820496] usbcore: registered new interface driver hub
[ 3.836056] usbcore: registered new device driver usb
[ 3.931299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.932424] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.932688] libata version 3.00 loaded.
[ 4.207590] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:7e:5d:23
[ 4.207592] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.207646] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
[ 4.207679] alloc irq_desc for 18 on node -1
[ 4.207680] alloc kstat_irqs on node -1
[ 4.207686] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.207716] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.207719] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.207735] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 4.207760] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.211657] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.211673] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0522000
[ 4.224017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.224043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.224047] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.224049] usb usb1: Product: EHCI Host Controller
[ 4.224052] usb usb1: Manufacturer: Linux 2.6.32.19 ehci_hcd
[ 4.224054] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.224146] usb usb1: configuration #1 chosen from 1 choice
[ 4.224182] hub 1-0:1.0: USB hub found
[ 4.224190] hub 1-0:1.0: 6 ports detected
[ 4.224248] alloc irq_desc for 16 on node -1
[ 4.224249] alloc kstat_irqs on node -1
[ 4.224253] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 4.224260] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.224262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.224269] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 2
[ 4.224297] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[ 4.224323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.224324] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.224326] usb usb2: Product: UHCI Host Controller
[ 4.224327] usb usb2: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.224328] usb usb2: SerialNumber: 0000:00:1a.0
[ 4.224367] usb usb2: configuration #1 chosen from 1 choice
[ 4.224386] hub 2-0:1.0: USB hub found
[ 4.224391] hub 2-0:1.0: 2 ports detected
[ 4.224444] alloc irq_desc for 23 on node -1
[ 4.224446] alloc kstat_irqs on node -1
[ 4.224449] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.224468] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.224470] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.224476] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 3
[ 4.224499] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.228383] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.228392] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0521000
[ 4.244011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.244029] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.244032] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.244035] usb usb3: Product: EHCI Host Controller
[ 4.244037] usb usb3: Manufacturer: Linux 2.6.32.19 ehci_hcd
[ 4.244040] usb usb3: SerialNumber: 0000:00:1d.7
[ 4.244114] usb usb3: configuration #1 chosen from 1 choice
[ 4.244147] hub 3-0:1.0: USB hub found
[ 4.244154] hub 3-0:1.0: 6 ports detected
[ 4.244214] alloc irq_desc for 21 on node -1
[ 4.244216] alloc kstat_irqs on node -1
[ 4.244219] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 4.244224] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.244226] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.244232] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 4.244258] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
[ 4.244283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.244284] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.244286] usb usb4: Product: UHCI Host Controller
[ 4.244287] usb usb4: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.244288] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.244326] usb usb4: configuration #1 chosen from 1 choice
[ 4.244344] hub 4-0:1.0: USB hub found
[ 4.244348] hub 4-0:1.0: 2 ports detected
[ 4.244390] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.244394] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.244396] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.244401] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 4.244421] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080
[ 4.244445] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.244446] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.244448] usb usb5: Product: UHCI Host Controller
[ 4.244449] usb usb5: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.244450] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.244488] usb usb5: configuration #1 chosen from 1 choice
[ 4.244505] hub 5-0:1.0: USB hub found
[ 4.244509] hub 5-0:1.0: 2 ports detected
[ 4.247169] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.247177] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.247179] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.247188] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 4.247212] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[ 4.247243] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.247245] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.247246] usb usb6: Product: UHCI Host Controller
[ 4.247248] usb usb6: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.247249] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.247298] usb usb6: configuration #1 chosen from 1 choice
[ 4.247319] hub 6-0:1.0: USB hub found
[ 4.247324] hub 6-0:1.0: 2 ports detected
[ 4.247360] ata_piix 0000:00:1f.2: version 2.13
[ 4.247372] alloc irq_desc for 19 on node -1
[ 4.247374] alloc kstat_irqs on node -1
[ 4.247379] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.247383] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.247425] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.248110] scsi0 : ata_piix
[ 4.248622] scsi1 : ata_piix
[ 4.248664] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma
0xf170 irq 19
[ 4.248668] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma
0xf178 irq 19
[ 4.248693] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.248700] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.248703] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.248712] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 4.248736] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[ 4.248774] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.248775] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.248777] usb usb7: Product: UHCI Host Controller
[ 4.248778] usb usb7: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.248780] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.248835] usb usb7: configuration #1 chosen from 1 choice
[ 4.248858] hub 7-0:1.0: USB hub found
[ 4.248863] hub 7-0:1.0: 2 ports detected
[ 4.248918] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.248922] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.248958] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.249021] scsi2 : ata_piix
[ 4.249264] scsi3 : ata_piix
[ 4.249295] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma
0xf110 irq 19
[ 4.249299] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma
0xf118 irq 19
[ 4.249327] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.249332] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.249334] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.249341] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 4.249366] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
[ 4.249394] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.249396] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.249397] usb usb8: Product: UHCI Host Controller
[ 4.249399] usb usb8: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.249400] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.249444] usb usb8: configuration #1 chosen from 1 choice
[ 4.249464] hub 8-0:1.0: USB hub found
[ 4.249469] hub 8-0:1.0: 2 ports detected
[ 4.578805] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.589584] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.044065] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.044077] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 5.052865] ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[ 5.052869] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.064064] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.064076] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 5.068818] ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[ 5.068821] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.068962] ata1.00: configured for UDMA/133
[ 5.069050] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[ 5.076865] ata2.00: configured for UDMA/133
[ 5.076947] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[ 5.110530] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 5.110561] sd 0:0:0:0: [sda] Write Protect is off
[ 5.110563] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.110578] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.110668] sda:
[ 5.110904] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 5.110932] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.110934] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.110949] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.111024] sdb: sdb1 sdb2 sdb3
[ 5.121767] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.136586] sda1 sda2 sda3
[ 5.136797] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.364591] md: raid1 personality registered for level 1
[ 5.368527] md: md0 stopped.
[ 5.433357] md: bind<sdb1>
[ 5.433535] md: bind<sda1>
[ 5.439319] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.439335] md0: detected capacity change from 0 to 1998585856
[ 5.439560] md: md1 stopped.
[ 5.439616] md0: unknown partition table
[ 5.474508] md: bind<sdb2>
[ 5.474684] md: bind<sda2>
[ 5.480568] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.480584] md1: detected capacity change from 0 to 17190748160
[ 5.480783] md: md2 stopped.
[ 5.480838] md1: unknown partition table
[ 5.505766] md: bind<sdb3>
[ 5.505944] md: bind<sda3>
[ 5.511814] raid1: raid set md2 active with 2 out of 2 mirrors
[ 5.511831] md2: detected capacity change from 0 to 981012578304
[ 5.511997] md2: unknown partition table
[ 5.640575] device-mapper: uevent: version 1.0.3
[ 5.640671] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com
[ 5.696970] kjournald starting. Commit interval 5 seconds
[ 5.696977] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.328140] udevd version 125 started
[ 6.640862] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 6.910370] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 7.047400] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 7.047409] ACPI: Sleep Button [SLPB]
[ 7.047444] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 7.047449] ACPI: Power Button [PWRB]
[ 7.047482] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.047484] ACPI: Power Button [PWRF]
[ 7.053221] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.060596] ACPI: SSDT 00000000cbe4cc18 002CC (v01 AMI IST
00000001 MSFT 03000001)
[ 7.061008] Marking TSC unstable due to TSC halts in idle
[ 7.061079] processor LNXCPU:00: registered as cooling_device0
[ 7.061420] processor LNXCPU:01: registered as cooling_device1
[ 7.128017] Switching to clocksource hpet
[ 9.388921] EXT3 FS on md0, internal journal
[ 10.222278] loop: module loaded
[ 11.551853] kjournald starting. Commit interval 5 seconds
[ 11.552251] EXT3 FS on md1, internal journal
[ 11.552257] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.610679] kjournald starting. Commit interval 5 seconds
[ 11.610700] EXT3-fs warning: mounting fs with errors, running e2fsck
is recommended
[ 11.663177] EXT3 FS on dm-25, internal journal
[ 11.663179] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.736152] Adding 2097144k swap on /dev/mapper/vgrp1-orion.swap.
Priority:-1 extents:1 across:2097144k
[ 12.383288] Bridge firewalling registered
[ 12.462079] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 12.462081] All bugs added by David S. Miller <davem@redhat.com>
[ 12.500820] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 12.556208] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 12.557125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.559244] device eth0.100 entered promiscuous mode
[ 12.559934] device eth0 entered promiscuous mode
[ 12.561076] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 12.562004] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.565799] xenbr100: port 1(eth0.100) entering learning state
[ 21.564175] xenbr100: port 1(eth0.100) entering forwarding state
[ 21.673428] device eth0.200 entered promiscuous mode
[ 21.681420] xenbr200: port 1(eth0.200) entering learning state
[ 22.880174] xenbr100: no IPv6 routers present
[ 23.368171] eth0: no IPv6 routers present
[ 23.424174] eth0.100: no IPv6 routers present
[ 30.680176] xenbr200: port 1(eth0.200) entering forwarding state
[ 32.196013] xenbr200: no IPv6 routers present
[ 32.584513] eth0.200: no IPv6 routers present
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-08-24 23:22 ` Claus Rosenberger
@ 2010-08-25 8:02 ` Claus Rosenberger
2010-08-25 8:53 ` Pasi Kärkkäinen
0 siblings, 1 reply; 25+ messages in thread
From: Claus Rosenberger @ 2010-08-25 8:02 UTC (permalink / raw)
To: xen-devel
Am 25.08.2010 01:22, schrieb Claus Rosenberger:
> I checked out these options, following result
>>>> - acpi=ht noapic => worked
>>>> - noapic => didn't work, disk errors while booting, no functional system
>>>> - acpi=ht apic=debug => worked
>>>>
>>>> So it seems i definitly need the option acpi=ht or acpi=off or something like that.
>>>>
>>> Keir, Jeremy: Any idea why acpi=ht is needed to make Intel DQ45CB (Q45 chipset) work?
>>>
>>> Without "acpi=ht" the system freezes randomly without any log/debug/serialconsole output..
>> At a random guess, there's something strange about the SCI interrupt.
>> When booting native, does "acpi" get irq 9 or something else? Is there
>> a BIOS setting relating to SCI or ACPI interrupts?
>>
>
> The kernel was running native without that problems, i attached dmesg. I
> didn't find any BIOS options like that.
>
a new test was done loading libata with option noacpi=1
- acpi=ht noapic => worked
- noapic => didn't work, disk errors while booting, no functional system
- acpi=ht apic=debug => worked
- xen without options but loading libata with option noacpi=1 => worked
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-08-25 8:02 ` Claus Rosenberger
@ 2010-08-25 8:53 ` Pasi Kärkkäinen
2010-08-27 7:03 ` Claus Rosenberger
0 siblings, 1 reply; 25+ messages in thread
From: Pasi Kärkkäinen @ 2010-08-25 8:53 UTC (permalink / raw)
To: Claus Rosenberger; +Cc: Jeremy Fitzhardinge, xen-devel
On Wed, Aug 25, 2010 at 10:02:59AM +0200, Claus Rosenberger wrote:
> Am 25.08.2010 01:22, schrieb Claus Rosenberger:
> > I checked out these options, following result
> >>>> - acpi=ht noapic => worked
> >>>> - noapic => didn't work, disk errors while booting, no functional system
> >>>> - acpi=ht apic=debug => worked
> >>>>
> >>>> So it seems i definitly need the option acpi=ht or acpi=off or something like that.
> >>>>
> >>> Keir, Jeremy: Any idea why acpi=ht is needed to make Intel DQ45CB (Q45 chipset) work?
> >>>
> >>> Without "acpi=ht" the system freezes randomly without any log/debug/serialconsole output..
> >> At a random guess, there's something strange about the SCI interrupt.
> >> When booting native, does "acpi" get irq 9 or something else? Is there
> >> a BIOS setting relating to SCI or ACPI interrupts?
> >>
> >
> > The kernel was running native without that problems, i attached dmesg. I
> > didn't find any BIOS options like that.
> >
>
>
> a new test was done loading libata with option noacpi=1
>
> - acpi=ht noapic => worked
> - noapic => didn't work, disk errors while booting, no functional system
> - acpi=ht apic=debug => worked
> - xen without options but loading libata with option noacpi=1 => worked
>
So only setting libata.noacpi=1 fixes (or workarounds) the problem.. hmm.
Or setting "acpi=ht" fixes it aswell.
Hopefully someone has ideas about the cause..
-- Pasi
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-08-25 8:53 ` Pasi Kärkkäinen
@ 2010-08-27 7:03 ` Claus Rosenberger
2010-12-05 6:13 ` Mark Brown
0 siblings, 1 reply; 25+ messages in thread
From: Claus Rosenberger @ 2010-08-27 7:03 UTC (permalink / raw)
To: xen-devel
Am 25.08.2010 10:53, schrieb Pasi Kärkkäinen:
> On Wed, Aug 25, 2010 at 10:02:59AM +0200, Claus Rosenberger wrote:
>> Am 25.08.2010 01:22, schrieb Claus Rosenberger:
>>> I checked out these options, following result
>>>>>> - acpi=ht noapic => worked
>>>>>> - noapic => didn't work, disk errors while booting, no functional system
>>>>>> - acpi=ht apic=debug => worked
>>>>>>
>>>>>> So it seems i definitly need the option acpi=ht or acpi=off or something like that.
>>>>>>
>>>>> Keir, Jeremy: Any idea why acpi=ht is needed to make Intel DQ45CB (Q45 chipset) work?
>>>>>
>>>>> Without "acpi=ht" the system freezes randomly without any log/debug/serialconsole output..
>>>> At a random guess, there's something strange about the SCI interrupt.
>>>> When booting native, does "acpi" get irq 9 or something else? Is there
>>>> a BIOS setting relating to SCI or ACPI interrupts?
>>>>
>>> The kernel was running native without that problems, i attached dmesg. I
>>> didn't find any BIOS options like that.
>>>
>>
>> a new test was done loading libata with option noacpi=1
>>
>> - acpi=ht noapic => worked
>> - noapic => didn't work, disk errors while booting, no functional system
>> - acpi=ht apic=debug => worked
>> - xen without options but loading libata with option noacpi=1 => worked
>>
> So only setting libata.noacpi=1 fixes (or workarounds) the problem.. hmm.
> Or setting "acpi=ht" fixes it aswell.
>
> Hopefully someone has ideas about the cause..
>
> -- Pasi
>
Now i got the error with libata.noacpi=1 too, but there was no impact so
no raid status lost or something else and it was only that one error:
[81907.801237] ata2: lost interrupt (Status 0x51)
[81907.803062] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x40d0002
action 0xe
[81907.805221] ata2.00: SError: { RecovComm PHYRdyChg CommWake 10B8B
DevExch }
[81907.805221] ata2.00: failed command: FLUSH CACHE EXT
[81907.805221] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[81907.805221] res 51/04:01:01:00:00/00:00:00:00:00/a0 Emask
0x10 (ATA bus error)
[81907.805221] ata2.00: status: { DRDY ERR }
[81907.805221] ata2.00: error: { ABRT }
[81907.805221] ata2.00: hard resetting link
[81908.540258] ata2.01: hard resetting link
[81909.016368] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[81909.019044] ata2.01: SATA link down (SStatus 0 SControl 300)
[81909.040964] ata2.00: configured for UDMA/133
[81909.042760] ata2: EH complete
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-08-27 7:03 ` Claus Rosenberger
@ 2010-12-05 6:13 ` Mark Brown
2010-12-06 13:04 ` Keir Fraser
0 siblings, 1 reply; 25+ messages in thread
From: Mark Brown @ 2010-12-05 6:13 UTC (permalink / raw)
To: xen-devel
I am facing similar issues on the Intel DQ45CB board.
Xen version 4.0.1 (Debian 4.0.1-1) (waldi@debian.org) (gcc version 4.4.5
20100824 (prerelease) (Debian 4.4.4-11) ) Fri Sep 3 15:38:12 UTC 2010
DomU 2.6.32-5-xen-amd64
For the HVM I get hangs on the CPU (limited it to one core) if intense IO is
performed. The Problem does not appear to exist in the RAW kernel (without
XEN).
I could not check the interrupts on the hang (XEN console 'i') it crashes.
After disabling the HPET in the BIOS I progressed to the current stage - no
hard crashes but prolonged 'hangs' on the SYSTEM - freezes, no ping
response, but comes back after some time.
Ideas, Suggestions?
--
View this message in context: http://xen.1045712.n5.nabble.com/Freeze-with-2-6-32-19-and-xen-4-0-1rc5-tp2643244p3292728.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-12-05 6:13 ` Mark Brown
@ 2010-12-06 13:04 ` Keir Fraser
2010-12-06 17:10 ` Mark Brown
0 siblings, 1 reply; 25+ messages in thread
From: Keir Fraser @ 2010-12-06 13:04 UTC (permalink / raw)
To: Mark Brown, xen-devel
Can you try building and installing the hypervisor (xen.gz) from the tip of
http://xenbits.xen.org/staging/xen-4.0-testing.hg ?
There is a fix in there to work around an erratum in Intel deep-sleep (C6
state) handling. Caused interrupt acknowledgements to be lost, interrupts
thus get blocked, system hangs/pauses, ...
-- Keir
On 04/12/2010 22:13, "Mark Brown" <mbrown@greenmountainservices.com> wrote:
>
> I am facing similar issues on the Intel DQ45CB board.
>
> Xen version 4.0.1 (Debian 4.0.1-1) (waldi@debian.org) (gcc version 4.4.5
> 20100824 (prerelease) (Debian 4.4.4-11) ) Fri Sep 3 15:38:12 UTC 2010
> DomU 2.6.32-5-xen-amd64
>
> For the HVM I get hangs on the CPU (limited it to one core) if intense IO is
> performed. The Problem does not appear to exist in the RAW kernel (without
> XEN).
>
> I could not check the interrupts on the hang (XEN console 'i') it crashes.
>
> After disabling the HPET in the BIOS I progressed to the current stage - no
> hard crashes but prolonged 'hangs' on the SYSTEM - freezes, no ping
> response, but comes back after some time.
>
> Ideas, Suggestions?
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-12-06 13:04 ` Keir Fraser
@ 2010-12-06 17:10 ` Mark Brown
2010-12-06 17:19 ` Mark Brown
2010-12-07 11:29 ` Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems Sander Eikelenboom
0 siblings, 2 replies; 25+ messages in thread
From: Mark Brown @ 2010-12-06 17:10 UTC (permalink / raw)
To: xen-devel
Keir,
Works! That is the short story. I was able to remove all boot parameter from
XEN.
The longer story:
Shutdown (like before) does not work from the DOM0 site. When I shut down
the machine it hangs after the last linux message is issued. XEN is still
active and from the serial console I can issue 'R' and all is fine
Dom0: 2.6.32-5-xen-amd64 (Debian)
THANKS A TON !!! Awesome!
Any idea on the reset hang?
Mark
--
View this message in context: http://xen.1045712.n5.nabble.com/Freeze-with-2-6-32-19-and-xen-4-0-1rc5-tp2643244p3294338.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-12-06 17:10 ` Mark Brown
@ 2010-12-06 17:19 ` Mark Brown
2010-12-10 2:24 ` Freeze with 2.6.32-5 and xen-4.0.2-rc1-pre Lockup Mark Brown
2010-12-07 11:29 ` Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems Sander Eikelenboom
1 sibling, 1 reply; 25+ messages in thread
From: Mark Brown @ 2010-12-06 17:19 UTC (permalink / raw)
To: xen-devel
UUUUUUhhhh,
Just after I fired up the last e-mail on 'IT WORKS' I had a CPU hang again
(ran for an hour or so).
Symptoms are somewhat different:
- I get continuous ping responses from the system (before it would time out)
- Kernel Message:
BUG: soft lockup - CPU#0 stuck for 61s [md_raid5:318]
...
BUG: soft lockup - CPU#0 stuck for 61s [kblockd/0:22]
They repeat all over.
Mark
--
View this message in context: http://xen.1045712.n5.nabble.com/Freeze-with-2-6-32-19-and-xen-4-0-1rc5-tp2643244p3294350.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-12-06 17:10 ` Mark Brown
2010-12-06 17:19 ` Mark Brown
@ 2010-12-07 11:29 ` Sander Eikelenboom
2010-12-07 11:37 ` Ian Campbell
1 sibling, 1 reply; 25+ messages in thread
From: Sander Eikelenboom @ 2010-12-07 11:29 UTC (permalink / raw)
To: Mark Brown; +Cc: xen-devel
Hello Mark,
There is already a fix for the reset hang that was introduced in 2.6.32.26 (which seems to be used for the debian 2.6.32-5-xen-amd64 kernel.
It is send for inclusion in the next stable kernel as well, but perhaps ask the debian guys to apply that patch http://git.kernel.org/?p=linux/kernel/git/jeremy/xen.git;a=commit;h=b92d1ec0a86acd2dfe14d732c6a9304aae0ccf26 couldn't hurt.
--
Sander
Monday, December 6, 2010, 6:10:51 PM, you wrote:
> Keir,
> Works! That is the short story. I was able to remove all boot parameter from
> XEN.
> The longer story:
> Shutdown (like before) does not work from the DOM0 site. When I shut down
> the machine it hangs after the last linux message is issued. XEN is still
> active and from the serial console I can issue 'R' and all is fine
> Dom0: 2.6.32-5-xen-amd64 (Debian)
> THANKS A TON !!! Awesome!
> Any idea on the reset hang?
> Mark
--
Best regards,
Sander mailto:linux@eikelenboom.it
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-12-07 11:29 ` Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems Sander Eikelenboom
@ 2010-12-07 11:37 ` Ian Campbell
2010-12-07 16:35 ` Mark Brown
0 siblings, 1 reply; 25+ messages in thread
From: Ian Campbell @ 2010-12-07 11:37 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: Mark Brown, xen-devel
On Tue, 2010-12-07 at 11:29 +0000, Sander Eikelenboom wrote:
> Hello Mark,
>
> There is already a fix for the reset hang that was introduced in 2.6.32.26 (which seems to be used for the debian 2.6.32-5-xen-amd64 kernel.
> It is send for inclusion in the next stable kernel as well, but perhaps ask the debian guys to apply that patch http://git.kernel.org/?p=linux/kernel/git/jeremy/xen.git;a=commit;h=b92d1ec0a86acd2dfe14d732c6a9304aae0ccf26 couldn't hurt.
This is Debian bug http://bugs.debian.org/605448
Ian.
>
> --
> Sander
>
> Monday, December 6, 2010, 6:10:51 PM, you wrote:
>
>
> > Keir,
>
> > Works! That is the short story. I was able to remove all boot parameter from
> > XEN.
>
> > The longer story:
>
> > Shutdown (like before) does not work from the DOM0 site. When I shut down
> > the machine it hangs after the last linux message is issued. XEN is still
> > active and from the serial console I can issue 'R' and all is fine
>
> > Dom0: 2.6.32-5-xen-amd64 (Debian)
>
> > THANKS A TON !!! Awesome!
>
> > Any idea on the reset hang?
>
> > Mark
>
>
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
2010-12-07 11:37 ` Ian Campbell
@ 2010-12-07 16:35 ` Mark Brown
0 siblings, 0 replies; 25+ messages in thread
From: Mark Brown @ 2010-12-07 16:35 UTC (permalink / raw)
To: xen-devel
Thanks Ian.
Just as a not Debian 2.6.32-5 uses the 2.6.32-28 Kernel. And That causes the
hang, at least for me.
Board is an Intel DQ45CB with and Intel E7600.
Mark
--
View this message in context: http://xen.1045712.n5.nabble.com/Freeze-with-2-6-32-19-and-xen-4-0-1rc5-tp2643244p3296053.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32-5 and xen-4.0.2-rc1-pre Lockup
2010-12-06 17:19 ` Mark Brown
@ 2010-12-10 2:24 ` Mark Brown
2010-12-13 16:55 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 25+ messages in thread
From: Mark Brown @ 2010-12-10 2:24 UTC (permalink / raw)
To: xen-devel
Here some more details on the lockup:
HW: Intel DQ45CB with E7100 CPU, 4GB RAM.
(XEN) Command line: console=com1 com1=115200,8n1 acpi=strict apic=debug
[ 0.000000] Command line: root=/dev/mapper/750GB-XEN ro console=hvc0
xen-pciback.hide=(01:00.0)(01:01.0) acpi=strict
Crash looks like this:
[ 9896.769906] BUG: soft lockup - CPU#0 stuck for 72s! [qemu-dm:17447]
[ 9896.769906] Modules linked in: fuse nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack tun xt_physdev iptable_filter ip_tables x_tables
bridge stp xen_evtchn xenfs loop firewire_sbp2 snd_hda_codec_analog
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device
i915 drm_kms_helper snd pcspkr psmouse evdev serio_raw drm i2c_i801
i2c_algo_bit soundcore i2c_core snd_page_alloc video output button processor
acpi_processor ext3 jbd mbcache dm_mod raid456 md_mod async_raid6_recov
async_pq raid6_pq async_xor xor async_memcpy async_tx sg sr_mod usbhid hid
cdrom sd_mod crc_t10dif firewire_ohci firewire_core uhci_hcd ata_generic
pata_sil680 crc_itu_t ata_piix sata_sil24 ahci libata e1000e thermal
thermal_sys ehci_hcd usbcore nls_base scsi_mod [last unloaded:
scsi_wait_scan]
[ 9896.769906] CPU 0:
[ 9896.769906] Modules linked in: fuse nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack tun xt_physdev iptable_filter ip_tables x_tables
bridge stp xen_evtchn xenfs loop firewire_sbp2 snd_hda_codec_analog
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device
i915 drm_kms_helper snd pcspkr psmouse evdev serio_raw drm i2c_i801
i2c_algo_bit soundcore i2c_core snd_page_alloc video output button processor
acpi_processor ext3 jbd mbcache dm_mod raid456 md_mod async_raid6_recov
async_pq raid6_pq async_xor xor async_memcpy async_tx sg sr_mod usbhid hid
cdrom sd_mod crc_t10dif firewire_ohci firewire_core uhci_hcd ata_generic
pata_sil680 crc_itu_t ata_piix sata_sil24 ahci libata e1000e thermal
thermal_sys ehci_hcd usbcore nls_base scsi_mod [last unloaded:
scsi_wait_scan]
[ 9896.769906] Pid: 17447, comm: qemu-dm Not tainted 2.6.32-5-xen-amd64 #1
[ 9896.769906] RIP: 0033:[<00007f708082b968>] [<00007f708082b968>]
0x7f708082b968
[ 9896.769906] RSP: 002b:00007fff23d56f08 EFLAGS: 00000202
[ 9896.769906] RAX: 0000000000000001 RBX: 0000000000c65a00 RCX:
ffffffff810092eb
[ 9896.769906] RDX: 0000000000000001 RSI: 0000000000000085 RDI:
0000000000ac43a4
[ 9896.769906] RBP: 0000000000ca7200 R08: 0000000000ac43a0 R09:
0000000004000001
[ 9896.769906] R10: 0000000000000001 R11: 0000000000000246 R12:
000000000018bf17
[ 9896.769906] R13: 0000000000000008 R14: 0000000000ca7200 R15:
000000000018bf17
[ 9896.769906] FS: 00007f7081c7b760(0000) GS:ffff880003acd000(0000)
knlGS:0000000000000000
[ 9896.769906] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 9896.769906] CR2: 0000000000adb908 CR3: 00000000021ea000 CR4:
0000000000002660
[ 9896.769906] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 9896.769906] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 9896.769906] Call Trace:
[ 9897.640060] BUG: soft lockup - CPU#1 stuck for 72s! [qemu-dm:26784]
[ 9897.640060] Modules linked in: fuse nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack tun xt_physdev iptable_filter ip_tables x_tables
bridge stp xen_evtchn xenfs loop firewire_sbp2 snd_hda_codec_analog
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device
i915 drm_kms_helper snd pcspkr psmouse evdev serio_raw drm i2c_i801
i2c_algo_bit soundcore i2c_core snd_page_alloc video output button processor
acpi_processor ext3 jbd mbcache dm_mod raid456 md_mod async_raid6_recov
async_pq raid6_pq async_xor xor async_memcpy async_tx sg sr_mod usbhid hid
cdrom sd_mod crc_t10dif firewire_ohci firewire_core uhci_hcd ata_generic
pata_sil680 crc_itu_t ata_piix sata_sil24 ahci libata e1000e thermal
thermal_sys ehci_hcd usbcore nls_base scsi_mod [last unloaded:
scsi_wait_scan]
[ 9897.640060] CPU 1:
[ 9897.640060] Modules linked in: fuse nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack tun xt_physdev iptable_filter ip_tables x_tables
bridge stp xen_evtchn xenfs loop firewire_sbp2 snd_hda_codec_analog
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device
i915 drm_kms_helper snd pcspkr psmouse evdev serio_raw drm i2c_i801
i2c_algo_bit soundcore i2c_core snd_page_alloc video output button processor
acpi_processor ext3 jbd mbcache dm_mod raid456 md_mod async_raid6_recov
async_pq raid6_pq async_xor xor async_memcpy async_tx sg sr_mod usbhid hid
cdrom sd_mod crc_t10dif firewire_ohci firewire_core uhci_hcd ata_generic
pata_sil680 crc_itu_t ata_piix sata_sil24 ahci libata e1000e thermal
thermal_sys ehci_hcd usbcore nls_base scsi_mod [last unloaded:
scsi_wait_scan]
[ 9897.640060] Pid: 26784, comm: qemu-dm Not tainted 2.6.32-5-xen-amd64 #1
[ 9897.640060] RIP: e030:[<ffffffff8100922a>] [<ffffffff8100922a>]
hypercall_page+0x22a/0x1001
[ 9897.640060] RSP: e02b:ffff8800bb769aa0 EFLAGS: 00000246
[ 9897.640060] RAX: 0000000000040000 RBX: ffff880003b00780 RCX:
ffffffff8100922a
[ 9897.640060] RDX: 00000000000116e0 RSI: 0000000000000000 RDI:
0000000000000000
[ 9897.640060] RBP: ffff8800badcd180 R08: ffff8800bb768000 R09:
ffff8800bca68e20
[ 9897.640060] R10: 0000000000000000 R11: 0000000000000246 R12:
ffff8800babab170
[ 9897.640060] R13: ffff8800bca68e20 R14: 0000000000000000 R15:
0000000000000000
[ 9897.640060] FS: 00007f70778a6710(0000) GS:ffff880003aeb000(0000)
knlGS:0000000000000000
[ 9897.640060] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 9897.640060] CR2: 00007f2117833760 CR3: 00000000021ea000 CR4:
0000000000002660
[ 9897.640060] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 9897.640060] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 9897.640060] Call Trace:
[ 9897.640060] [<ffffffff8100e5bd>] ? xen_force_evtchn_callback+0x9/0xa
[ 9897.640060] [<ffffffff8100ec72>] ? check_events+0x12/0x20
[ 9897.640060] [<ffffffff8100ec19>] ? xen_irq_enable_direct_end+0x0/0x7
[ 9897.640060] [<ffffffff81049036>] ? finish_task_switch+0x44/0xaf
[ 9897.640060] [<ffffffff8130aeec>] ? thread_return+0x4e/0xe0
[ 9897.640060] [<ffffffff81068b40>] ? __hrtimer_start_range_ns+0x22f/0x242
[ 9897.640060] [<ffffffff810724e9>] ? futex_wait_queue_me+0xa4/0xbc
[ 9897.640060] [<ffffffff81072646>] ? futex_wait+0x145/0x291
[ 9897.640060] [<ffffffff810680db>] ? hrtimer_wakeup+0x0/0x22
[ 9897.640060] [<ffffffff810724bf>] ? futex_wait_queue_me+0x7a/0xbc
[ 9897.640060] [<ffffffff8107422b>] ? do_futex+0x9d/0x989
[ 9897.640060] [<ffffffff8105d34e>] ? signal_wake_up+0x24/0x33
[ 9897.640060] [<ffffffff8105d68e>] ? __send_signal+0x1fe/0x21b
[ 9897.640060] [<ffffffff8130c1c4>] ? _spin_lock_irqsave+0x15/0x34
[ 9897.640060] [<ffffffff8130c2b2>] ? _spin_unlock_irqrestore+0xd/0xe
[ 9897.640060] [<ffffffff8105d76a>] ? do_send_sig_info+0x5b/0x6a
[ 9897.640060] [<ffffffff8105d9bc>] ? kill_pid_info+0x31/0x3b
[ 9897.640060] [<ffffffff8102ddb4>] ? pvclock_clocksource_read+0x3a/0x8b
[ 9897.640060] [<ffffffff81074c2a>] ? sys_futex+0x113/0x131
[ 9897.640060] [<ffffffff81011b42>] ? system_call_fastpath+0x16/0x1b
Xen interrupt information:
(XEN) Guest interrupt information:
(XEN) IRQ: 0 affinity:00000000,00000000,00000000,00000001 vec:f0
type=IO-APIC-edge status=00000000 mapped, unbound
(XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000001 vec:48
type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 1(----),
(XEN) IRQ: 2 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:e2
type=XT-PIC status=00000000 mapped, unbound
(XEN) IRQ: 3 affinity:00000000,00000000,00000000,00000001 vec:50
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 4 affinity:00000000,00000000,00000000,00000001 vec:f1
type=IO-APIC-edge status=00000000 mapped, unbound
(XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:58
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:60
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:68
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 8 affinity:00000000,00000000,00000000,00000001 vec:70
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 8(----),
(XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:78
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 9(----),
(XEN) IRQ: 10 affinity:00000000,00000000,00000000,00000001 vec:88
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 11 affinity:00000000,00000000,00000000,00000001 vec:90
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:98
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 12(----),
(XEN) IRQ: 13 affinity:00000000,00000000,00000000,00000003 vec:a0
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:a8
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:b0
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:59
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 16(----),
(XEN) IRQ: 17 affinity:00000000,00000000,00000000,00000001 vec:39
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 17(----),
(XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000001 vec:51
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 18(----),
(XEN) IRQ: 19 affinity:00000000,00000000,00000000,00000001 vec:79
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 19(----),
(XEN) IRQ: 20 affinity:00000000,00000000,00000000,00000003 vec:61
type=IO-APIC-level status=00000002 mapped, unbound
(XEN) IRQ: 21 affinity:00000000,00000000,00000000,00000001 vec:71
type=IO-APIC-level status=00000010 in-flight=1 domain-list=0: 21(P-MM),
(XEN) IRQ: 22 affinity:00000000,00000000,00000000,00000001 vec:91
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 22(----),
(XEN) IRQ: 23 affinity:00000000,00000000,00000000,00000001 vec:89
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 23(----),
(XEN) IRQ: 24 affinity:00000000,00000000,00000000,00000001 vec:28
type=DMA_MSI status=00000000 mapped, unbound
(XEN) IRQ: 25 affinity:00000000,00000000,00000000,00000001 vec:30
type=DMA_MSI status=00000000 mapped, unbound
(XEN) IRQ: 26 affinity:00000000,00000000,00000000,00000001 vec:38
type=DMA_MSI status=00000000 mapped, unbound
(XEN) IRQ: 27 affinity:00000000,00000000,00000000,00000001 vec:40
type=DMA_MSI status=00000000 mapped, unbound
(XEN) IRQ: 28 affinity:00000000,00000000,00000000,00000001 vec:b8
type=HPET-MSI status=00000000 mapped, unbound
(XEN) IRQ: 29 affinity:00000000,00000000,00000000,00000001 vec:c0
type=HPET-MSI status=00000000 mapped, unbound
(XEN) IRQ: 30 affinity:00000000,00000000,00000000,00000001 vec:c8
type=HPET-MSI status=00000000 mapped, unbound
(XEN) IRQ: 31 affinity:00000000,00000000,00000000,00000001 vec:d0
type=HPET-MSI status=00000000 mapped, unbound
(XEN) IRQ: 32 affinity:00000000,00000000,00000000,00000001 vec:d8
type=HPET-MSI status=00000000 mapped, unbound
(XEN) IRQ: 33 affinity:00000000,00000000,00000000,00000002 vec:21
type=HPET-MSI status=00000000 mapped, unbound
(XEN) IRQ: 34 affinity:00000000,00000000,00000000,00000001 vec:29
type=HPET-MSI status=00000000 mapped, unbound
(XEN) IRQ: 35 affinity:00000000,00000000,00000000,00000001 vec:31
type=HPET-MSI status=00000000 mapped, unbound
(XEN) IRQ: 36 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:41
type=PCI-MSI status=00000002 mapped, unbound
(XEN) IRQ: 37 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:49
type=PCI-MSI status=00000002 mapped, unbound
(XEN) IRQ: 38 affinity:00000000,00000000,00000000,00000002 vec:d1
type=PCI-MSI status=00000010 in-flight=0 domain-list=0:277(----),
(XEN) IRQ: 39 affinity:00000000,00000000,00000000,00000001 vec:81
type=PCI-MSI status=00000014 in-flight=0 domain-list=0:276(----),
(XEN) IRQ: 40 affinity:00000000,00000000,00000000,00000001 vec:99
type=PCI-MSI status=00000010 in-flight=0 domain-list=0:275(----),
(XEN) IO-APIC interrupt information:
(XEN) IRQ 0 Vec240:
(XEN) Apic 0x00, Pin 2: vector=240, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 1 Vec 72:
(XEN) Apic 0x00, Pin 1: vector=72, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 3 Vec 80:
(XEN) Apic 0x00, Pin 3: vector=80, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 4 Vec241:
(XEN) Apic 0x00, Pin 4: vector=241, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 5 Vec 88:
(XEN) Apic 0x00, Pin 5: vector=88, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 6 Vec 96:
(XEN) Apic 0x00, Pin 6: vector=96, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 7 Vec104:
(XEN) Apic 0x00, Pin 7: vector=104, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 8 Vec112:
(XEN) Apic 0x00, Pin 8: vector=112, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 9 Vec120:
(XEN) Apic 0x00, Pin 9: vector=120, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=level,
mask=0, dest_id:1
(XEN) IRQ 10 Vec136:
(XEN) Apic 0x00, Pin 10: vector=136, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 11 Vec144:
(XEN) Apic 0x00, Pin 11: vector=144, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 12 Vec152:
(XEN) Apic 0x00, Pin 12: vector=152, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 13 Vec160:
(XEN) Apic 0x00, Pin 13: vector=160, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=1, dest_id:3
(XEN) IRQ 14 Vec168:
(XEN) Apic 0x00, Pin 14: vector=168, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 15 Vec176:
(XEN) Apic 0x00, Pin 15: vector=176, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge,
mask=0, dest_id:1
(XEN) IRQ 16 Vec 89:
(XEN) Apic 0x00, Pin 16: vector=89, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level,
mask=0, dest_id:1
(XEN) IRQ 17 Vec 57:
(XEN) Apic 0x00, Pin 17: vector=57, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level,
mask=0, dest_id:1
(XEN) IRQ 18 Vec 81:
(XEN) Apic 0x00, Pin 18: vector=81, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level,
mask=0, dest_id:1
(XEN) IRQ 19 Vec121:
(XEN) Apic 0x00, Pin 19: vector=121, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level,
mask=0, dest_id:1
(XEN) IRQ 20 Vec 97:
(XEN) Apic 0x00, Pin 20: vector=97, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level,
mask=1, dest_id:3
(XEN) IRQ 21 Vec113:
(XEN) Apic 0x00, Pin 21: vector=113, delivery_mode=1,
dest_mode=logical, delivery_status=1, polarity=1, irr=1, trigger=level,
mask=0, dest_id:1
(XEN) IRQ 22 Vec145:
(XEN) Apic 0x00, Pin 22: vector=145, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level,
mask=0, dest_id:1
(XEN) IRQ 23 Vec137:
(XEN) Apic 0x00, Pin 23: vector=137, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level,
mask=0, dest_id:1
/proc/interrupts
CPU0 CPU1
1: 2 0 xen-pirq-ioapic-edge i8042
8: 0 0 xen-pirq-ioapic-edge rtc0
9: 0 0 xen-pirq-ioapic-edge acpi
12: 4 0 xen-pirq-ioapic-edge i8042
16: 1397 0 xen-pirq-ioapic-level uhci_hcd:usb3
17: 9 0 xen-pirq-ioapic-level serial
18: 2 0 xen-pirq-ioapic-level ehci_hcd:usb1,
uhci_hcd:usb5, uhci_hcd:usb8
19: 0 0 xen-pirq-ioapic-level ata_piix, uhci_hcd:usb7
21: 700000 0 xen-pirq-ioapic-level uhci_hcd:usb4
22: 3154 0 xen-pirq-ioapic-level HDA Intel
23: 0 0 xen-pirq-ioapic-level ehci_hcd:usb2,
uhci_hcd:usb6
745: 759899 0 xen-dyn-event evtchn:qemu-dm
746: 1 0 xen-dyn-event evtchn:xenstored
747: 37 0 xen-dyn-event evtchn:xenstored
748: 17413 0 xen-dyn-event evtchn:xenstored
749: 0 0 xen-pirq-msi i915
750: 313143 0 xen-pirq-msi ahci
751: 23836 0 xen-pirq-msi peth0
752: 8518 0 xen-percpu-virq hvc_console
753: 0 0 xen-percpu-virq mce
756: 0 0 xen-percpu-virq pcpu
757: 29085 0 xen-dyn-event xenbus
758: 0 117556 xen-percpu-ipi callfuncsingle1
759: 0 0 xen-percpu-virq debug1
760: 0 0 xen-percpu-ipi callfunc1
761: 0 292100 xen-percpu-ipi resched1
762: 0 213170 xen-percpu-virq timer1
763: 2702 0 xen-percpu-ipi callfuncsingle0
764: 0 0 xen-percpu-virq debug0
765: 0 0 xen-percpu-ipi callfunc0
766: 215939 0 xen-percpu-ipi resched0
767: 453126 0 xen-percpu-virq timer0
NMI: 0 0 Non-maskable interrupts
LOC: 0 0 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 215939 292100 Rescheduling interrupts
CAL: 2702 117556 Function call interrupts
TLB: 0 0 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 31 31 Machine check polls
ERR: 0
MIS: 0
Mark
--
View this message in context: http://xen.1045712.n5.nabble.com/Freeze-with-2-6-32-19-and-xen-4-0-1rc5-tp2643244p3299745.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Re: Freeze with 2.6.32-5 and xen-4.0.2-rc1-pre Lockup
2010-12-10 2:24 ` Freeze with 2.6.32-5 and xen-4.0.2-rc1-pre Lockup Mark Brown
@ 2010-12-13 16:55 ` Konrad Rzeszutek Wilk
0 siblings, 0 replies; 25+ messages in thread
From: Konrad Rzeszutek Wilk @ 2010-12-13 16:55 UTC (permalink / raw)
To: Mark Brown, Ian.Campbell; +Cc: xen-devel
On Thu, Dec 09, 2010 at 06:24:30PM -0800, Mark Brown wrote:
>
> Here some more details on the lockup:
>
> HW: Intel DQ45CB with E7100 CPU, 4GB RAM.
>
> (XEN) Command line: console=com1 com1=115200,8n1 acpi=strict apic=debug
> [ 0.000000] Command line: root=/dev/mapper/750GB-XEN ro console=hvc0
> xen-pciback.hide=(01:00.0)(01:01.0) acpi=strict
>
> Crash looks like this:
> [ 9896.769906] BUG: soft lockup - CPU#0 stuck for 72s! [qemu-dm:17447]
.. snip ..
> [ 9896.769906] Pid: 17447, comm: qemu-dm Not tainted 2.6.32-5-xen-amd64 #1
> [ 9896.769906] RIP: 0033:[<00007f708082b968>] [<00007f708082b968>]
> 0x7f708082b968
> [ 9896.769906] RSP: 002b:00007fff23d56f08 EFLAGS: 00000202
> [ 9896.769906] RAX: 0000000000000001 RBX: 0000000000c65a00 RCX:
> ffffffff810092eb
> [ 9896.769906] RDX: 0000000000000001 RSI: 0000000000000085 RDI:
> 0000000000ac43a4
> [ 9896.769906] RBP: 0000000000ca7200 R08: 0000000000ac43a0 R09:
> 0000000004000001
.. snip ..
> type=IO-APIC-level status=00000010 in-flight=1 domain-list=0: 21(P-MM),
> (XEN) IRQ: 22 affinity:00000000,00000000,00000000,00000001 vec:91
That looks quite suspect. Ian, this kernel - it wouldn't have your fix
for the memset?
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-08-21 13:47 Freeze with 2.6.32.19 and xen-4.0.1rc5 Claus Rosenberger
2010-08-21 14:02 ` Pasi Kärkkäinen
2010-08-21 23:04 ` Freeze with 2.6.32.19 and xen-4.0.1rc5 Bruce Edge
@ 2010-12-14 0:59 ` Mark Brown
2010-12-14 11:04 ` Pasi Kärkkäinen
2 siblings, 1 reply; 25+ messages in thread
From: Mark Brown @ 2010-12-14 0:59 UTC (permalink / raw)
To: xen-devel
Claus,
I am somewhat certain that my problems relate to IRQ hangs/race conditions.
I have been able to navigate the configuration in a way that I can run HVM
(qemu) without problems and not have hangs on other guests either.
Suggestions:
- Not clear why you use the ram parameter for dom0, not needed
- Keep the serial config to a minimum - less is more, consider: console=com1
com1=115200,8n1
- Personally I had success with 'acpi=strict apic=debug' to gather some more
info.
I have the same board and run 2.6.32-28 (squeeze) as Dom0
Mark
--
View this message in context: http://xen.1045712.n5.nabble.com/Freeze-with-2-6-32-19-and-xen-4-0-1rc5-tp2643244p3303904.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Re: Freeze with 2.6.32.19 and xen-4.0.1rc5
2010-12-14 0:59 ` Mark Brown
@ 2010-12-14 11:04 ` Pasi Kärkkäinen
0 siblings, 0 replies; 25+ messages in thread
From: Pasi Kärkkäinen @ 2010-12-14 11:04 UTC (permalink / raw)
To: Mark Brown; +Cc: xen-devel
On Mon, Dec 13, 2010 at 04:59:01PM -0800, Mark Brown wrote:
>
> Claus,
>
> I am somewhat certain that my problems relate to IRQ hangs/race conditions.
> I have been able to navigate the configuration in a way that I can run HVM
> (qemu) without problems and not have hangs on other guests either.
>
> Suggestions:
>
> - Not clear why you use the ram parameter for dom0, not needed
dom0_mem can be used to limit dom0 memory, it's better way
than ballooning it down later.
See: http://wiki.xen.org/xenwiki/XenBestPractices
-- Pasi
> - Keep the serial config to a minimum - less is more, consider: console=com1
> com1=115200,8n1
> - Personally I had success with 'acpi=strict apic=debug' to gather some more
> info.
>
> I have the same board and run 2.6.32-28 (squeeze) as Dom0
>
> Mark
> --
> View this message in context: http://xen.1045712.n5.nabble.com/Freeze-with-2-6-32-19-and-xen-4-0-1rc5-tp2643244p3303904.html
> Sent from the Xen - Dev mailing list archive at Nabble.com.
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2010-12-14 11:04 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-08-21 13:47 Freeze with 2.6.32.19 and xen-4.0.1rc5 Claus Rosenberger
2010-08-21 14:02 ` Pasi Kärkkäinen
2010-08-21 22:08 ` Claus Rosenberger
2010-08-23 8:01 ` Claus Rosenberger
2010-08-23 11:09 ` Pasi Kärkkäinen
2010-08-23 12:29 ` Pasi Kärkkäinen
2010-08-24 7:50 ` Claus Rosenberger
2010-08-24 8:16 ` Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems Pasi Kärkkäinen
2010-08-24 8:49 ` Jeremy Fitzhardinge
2010-08-24 23:22 ` Claus Rosenberger
2010-08-25 8:02 ` Claus Rosenberger
2010-08-25 8:53 ` Pasi Kärkkäinen
2010-08-27 7:03 ` Claus Rosenberger
2010-12-05 6:13 ` Mark Brown
2010-12-06 13:04 ` Keir Fraser
2010-12-06 17:10 ` Mark Brown
2010-12-06 17:19 ` Mark Brown
2010-12-10 2:24 ` Freeze with 2.6.32-5 and xen-4.0.2-rc1-pre Lockup Mark Brown
2010-12-13 16:55 ` Konrad Rzeszutek Wilk
2010-12-07 11:29 ` Re: Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems Sander Eikelenboom
2010-12-07 11:37 ` Ian Campbell
2010-12-07 16:35 ` Mark Brown
2010-08-21 23:04 ` Freeze with 2.6.32.19 and xen-4.0.1rc5 Bruce Edge
2010-12-14 0:59 ` Mark Brown
2010-12-14 11:04 ` Pasi Kärkkäinen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.