From: Shawn Guo <shawn.guo@freescale.com> To: <davem@davemloft.net>, <gerg@snapgear.com>, <baruch@tkos.co.il>, <eric@eukrea.com>, <bryan.wu@canonical.com>, <r64343@freescale.com>, <B32542@freescale.com>, <u.kleine-koenig@pengutro Subject: [PATCH v4 07/10] ARM: mx28: add the second fec device registration Date: Thu, 6 Jan 2011 15:13:15 +0800 [thread overview] Message-ID: <1294297998-26930-8-git-send-email-shawn.guo@freescale.com> (raw) In-Reply-To: <1294297998-26930-1-git-send-email-shawn.guo@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- arch/arm/mach-mxs/mach-mx28evk.c | 28 +++++++++++++++++++++++++--- 1 files changed, 25 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index d162e95..def6519 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -57,6 +57,19 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_ENET_CLK__CLKCTRL_ENET | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + /* fec1 */ + MX28_PAD_ENET0_CRS__ENET1_RX_EN | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_RXD2__ENET1_RXD0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_RXD3__ENET1_RXD1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_COL__ENET1_TX_EN | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_TXD2__ENET1_TXD0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_TXD3__ENET1_TXD1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), /* phy power line */ MX28_PAD_SSP1_DATA3__GPIO_2_15 | (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), @@ -106,8 +119,14 @@ static void __init mx28evk_fec_reset(void) gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } -static const struct fec_platform_data mx28_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, +static struct fec_platform_data mx28_fec_pdata[] = { + { + /* fec0 */ + .phy = PHY_INTERFACE_MODE_RMII, + }, { + /* fec1 */ + .phy = PHY_INTERFACE_MODE_RMII, + }, }; static void __init mx28evk_init(void) @@ -117,7 +136,10 @@ static void __init mx28evk_init(void) mx28_add_duart(); mx28evk_fec_reset(); - mx28_add_fec(0, &mx28_fec_pdata); + mx28_add_fec(0, &mx28_fec_pdata[0]); +#ifdef CONFIG_FEC2 + mx28_add_fec(1, &mx28_fec_pdata[1]); +#endif } static void __init mx28evk_timer_init(void) -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: shawn.guo@freescale.com (Shawn Guo) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 07/10] ARM: mx28: add the second fec device registration Date: Thu, 6 Jan 2011 15:13:15 +0800 [thread overview] Message-ID: <1294297998-26930-8-git-send-email-shawn.guo@freescale.com> (raw) In-Reply-To: <1294297998-26930-1-git-send-email-shawn.guo@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- arch/arm/mach-mxs/mach-mx28evk.c | 28 +++++++++++++++++++++++++--- 1 files changed, 25 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index d162e95..def6519 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -57,6 +57,19 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_ENET_CLK__CLKCTRL_ENET | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + /* fec1 */ + MX28_PAD_ENET0_CRS__ENET1_RX_EN | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_RXD2__ENET1_RXD0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_RXD3__ENET1_RXD1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_COL__ENET1_TX_EN | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_TXD2__ENET1_TXD0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_ENET0_TXD3__ENET1_TXD1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), /* phy power line */ MX28_PAD_SSP1_DATA3__GPIO_2_15 | (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), @@ -106,8 +119,14 @@ static void __init mx28evk_fec_reset(void) gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } -static const struct fec_platform_data mx28_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, +static struct fec_platform_data mx28_fec_pdata[] = { + { + /* fec0 */ + .phy = PHY_INTERFACE_MODE_RMII, + }, { + /* fec1 */ + .phy = PHY_INTERFACE_MODE_RMII, + }, }; static void __init mx28evk_init(void) @@ -117,7 +136,10 @@ static void __init mx28evk_init(void) mx28_add_duart(); mx28evk_fec_reset(); - mx28_add_fec(0, &mx28_fec_pdata); + mx28_add_fec(0, &mx28_fec_pdata[0]); +#ifdef CONFIG_FEC2 + mx28_add_fec(1, &mx28_fec_pdata[1]); +#endif } static void __init mx28evk_timer_init(void) -- 1.7.1
next prev parent reply other threads:[~2011-01-06 7:12 UTC|newest] Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-01-06 7:13 [PATCH v4 00/10] net/fec: add dual fec support for i.MX28 Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-06 7:13 ` [PATCH v4 01/10] net/fec: fix MMFR_OP type in fec_enet_mdio_write Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-06 7:13 ` [PATCH v4 02/10] net/fec: remove the use of "index" which is legacy Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-06 7:13 ` [PATCH v4 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-06 7:13 ` [PATCH v4 04/10] net/fec: improve pm for better suspend/resume Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-06 7:13 ` [PATCH v4 05/10] net/fec: add dual fec support for mx28 Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-11 10:27 ` Sascha Hauer 2011-01-11 10:27 ` Sascha Hauer 2011-01-11 11:38 ` Shawn Guo 2011-01-11 11:38 ` Shawn Guo 2011-01-11 12:24 ` Greg Ungerer 2011-01-11 12:24 ` Greg Ungerer 2011-01-11 13:07 ` Uwe Kleine-König 2011-01-11 13:07 ` Uwe Kleine-König 2011-01-11 13:25 ` Greg Ungerer 2011-01-11 13:25 ` Greg Ungerer 2011-01-12 7:42 ` Uwe Kleine-König 2011-01-12 7:42 ` Uwe Kleine-König 2011-01-13 14:48 ` Uwe Kleine-König 2011-01-13 14:48 ` Uwe Kleine-König 2011-01-14 5:48 ` Shawn Guo 2011-01-14 5:48 ` Shawn Guo 2011-01-14 7:52 ` Uwe Kleine-König 2011-01-14 7:52 ` Uwe Kleine-König 2011-01-14 13:08 ` Shawn Guo 2011-01-14 13:08 ` Shawn Guo 2011-01-17 8:16 ` Lothar Waßmann 2011-01-17 8:16 ` Lothar Waßmann 2011-01-17 8:42 ` Uwe Kleine-König 2011-01-17 8:42 ` Uwe Kleine-König 2011-01-17 11:52 ` Shawn Guo 2011-01-17 11:52 ` Shawn Guo 2011-01-17 9:06 ` Uwe Kleine-König 2011-01-17 9:06 ` Uwe Kleine-König 2011-01-13 21:06 ` Uwe Kleine-König 2011-01-13 21:06 ` Uwe Kleine-König 2011-01-06 7:13 ` [PATCH v4 06/10] ARM: mx28: update clock and device name for dual fec support Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-13 15:06 ` Uwe Kleine-König 2011-01-13 15:06 ` Uwe Kleine-König 2011-01-14 6:46 ` Shawn Guo 2011-01-14 6:46 ` Shawn Guo 2011-01-14 6:53 ` [PATCH] ARM: mxs: pass fec device name via platform data Shawn Guo 2011-01-14 6:53 ` Shawn Guo 2011-01-14 8:38 ` Uwe Kleine-König 2011-01-14 8:38 ` Uwe Kleine-König 2011-01-06 7:13 ` Shawn Guo [this message] 2011-01-06 7:13 ` [PATCH v4 07/10] ARM: mx28: add the second fec device registration Shawn Guo 2011-01-11 10:29 ` Sascha Hauer 2011-01-11 10:29 ` Sascha Hauer 2011-01-11 11:39 ` Shawn Guo 2011-01-11 11:39 ` Shawn Guo 2011-01-11 11:44 ` Sascha Hauer 2011-01-11 11:44 ` Sascha Hauer 2011-01-06 7:13 ` [PATCH v4 08/10] ARM: mxs: add ocotp read function Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-11 13:31 ` Sascha Hauer 2011-01-11 13:31 ` Sascha Hauer 2011-01-11 14:05 ` Uwe Kleine-König 2011-01-11 14:05 ` Uwe Kleine-König 2011-01-12 6:47 ` Shawn Guo 2011-01-12 6:47 ` Shawn Guo 2011-01-12 14:50 ` Sascha Hauer 2011-01-12 14:50 ` Sascha Hauer 2011-01-12 16:01 ` Uwe Kleine-König 2011-01-12 16:01 ` Uwe Kleine-König 2011-01-13 1:55 ` Shawn Guo 2011-01-13 1:55 ` Shawn Guo 2011-01-13 15:19 ` Uwe Kleine-König 2011-01-13 15:19 ` Uwe Kleine-König 2011-01-14 8:33 ` Sascha Hauer 2011-01-14 8:33 ` Sascha Hauer 2011-01-14 13:16 ` Shawn Guo 2011-01-14 13:16 ` Shawn Guo 2011-01-19 10:48 ` Shawn Guo 2011-01-19 10:48 ` Shawn Guo 2011-01-06 7:13 ` [PATCH v4 09/10] ARM: mx28: read fec mac address from ocotp Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-13 14:50 ` Uwe Kleine-König 2011-01-13 14:50 ` Uwe Kleine-König 2011-01-06 7:13 ` [PATCH v4 10/10] ARM: mxs: add initial pm support Shawn Guo 2011-01-06 7:13 ` Shawn Guo 2011-01-09 23:44 ` [PATCH v4 00/10] net/fec: add dual fec support for i.MX28 David Miller 2011-01-09 23:44 ` David Miller 2011-01-10 3:08 ` Shawn Guo 2011-01-10 3:08 ` Shawn Guo 2011-01-11 8:15 ` Shawn Guo 2011-01-11 8:15 ` Shawn Guo 2011-01-11 12:07 ` [PATCH] net/fec: remove config FEC2 as it's used nowhere Shawn Guo 2011-01-11 12:07 ` Shawn Guo 2011-01-11 22:03 ` David Miller 2011-01-11 22:03 ` David Miller 2011-01-11 12:09 ` [PATCH v5] ARM: mx28: add the second fec device registration Shawn Guo 2011-01-11 12:09 ` Shawn Guo 2011-01-13 14:49 ` Uwe Kleine-König 2011-01-13 14:49 ` Uwe Kleine-König 2011-01-14 7:04 ` Shawn Guo 2011-01-14 7:04 ` Shawn Guo 2011-01-14 7:24 ` [PATCH v5 08/10] ARM: mxs: add ocotp read function Shawn Guo 2011-01-14 7:24 ` Shawn Guo 2011-01-14 8:40 ` Sascha Hauer 2011-01-14 8:40 ` Sascha Hauer 2011-01-14 9:48 ` Uwe Kleine-König 2011-01-14 9:48 ` Uwe Kleine-König 2011-01-14 8:42 ` Uwe Kleine-König 2011-01-14 8:42 ` Uwe Kleine-König 2011-01-14 7:25 ` [PATCH v5 09/10] ARM: mxs/mx28evk: read fec mac address from ocotp Shawn Guo 2011-01-14 7:25 ` Shawn Guo 2011-01-14 15:11 ` [PATCH v6 08/10] ARM: mxs: add ocotp read function Shawn Guo 2011-01-14 15:11 ` Shawn Guo 2011-01-24 9:05 ` [PATCH v5] ARM: mxs: add initial pm support Shawn Guo 2011-01-24 9:05 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1294297998-26930-8-git-send-email-shawn.guo@freescale.com \ --to=shawn.guo@freescale.com \ --cc=B32542@freescale.com \ --cc=baruch@tkos.co.il \ --cc=bryan.wu@canonical.com \ --cc=davem@davemloft.net \ --cc=eric@eukrea.com \ --cc=gerg@snapgear.com \ --cc=r64343@freescale.com \ --cc=u.kleine-koenig@pengutro \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.