* [Qemu-devel] [PATCH 0/7] usb-ccid (v15)
@ 2011-01-11 8:38 Alon Levy
0 siblings, 0 replies; 3+ messages in thread
From: Alon Levy @ 2011-01-11 8:38 UTC (permalink / raw)
To: qemu-devel
This patchset adds three new devices, usb-ccid, ccid-card-passthru and
ccid-card-emulated, providing a CCID bus, a simple passthru protocol
implementing card requiring a client, and a standalone emulated card.
It also introduces a new directory libcaccard with CAC card emulation,
CAC is a type of ISO 7816 smart card.
Tree for pull: git://anongit.freedesktop.org/~alon/qemu usb_ccid.v14
v14-v15 changes:
* add patch with --enable-smartcard and --disable-smartcard and only
disable ccid-card-emulated if nss not found.
* add patch with description strings
* s/libcaccard/libcacard/ in docs/ccid.txt
v13-v14 changes:
- support device_del/device_add on ccid-card-* and usb-ccid
* usb-ccid:
* lose card reference when card device deleted
* check slot number and deny adding a slot if one is already added.
* ccid-card-*: use qdev_simple_unplug_cb in both emulated and passthru ccid cards,
the exitfn already takes care of triggering card removal in the usb dev.
* libcacard:
* remove double include of config-host.mak
* add replay of card events to libcacard to support second and more emulation
* don't initialize more then once (doesn't support it right now, so one
thread, NSS thread, is left when device_del is done)
* add VCARD_EMUL_INIT_ALREADY_INITED
* ccid-card-emulated:
* take correct mutexes on signaling to fix deadlocks on device_del
* allow card insertion/removal event without proper reader insertion event
v12-v13 changes:
* libcacard:
* fix Makefile clean to remove vscclient
* fix double include of config-host in Makefile
* usb-ccid: remove attach/detach logic, usb is always attached. Guest
doesn't care if there is a reader attached with no card anyway.
* ccid-card-passthru: don't close chr_dev on removal, makes it possible
to use device_del/device_add to create remove/insertion for debugging.
v11-v12 changes:
* fix out of tree build
v10-v11 changes:
* fix last patch that removed one of the doc files.
* updated flow table in docs/ccid.txt
v8-v10 changes:
* usb-ccid:
* add slot for future use (Gerd)
* ifdef ENABLE_MIGRATION for migration support on account of usb
migration not being ready in general. (Gerd)
* verbosified commit messages. (Gerd)
* put libcacard docs in libcacard commit. (Gerd)
v8-v9 changes:
* Blue Swirl comments:
* white space fixes
* enabled by default, disabled only if missing nss
* forgotten fix from v8 (don't build libcacard.so)
* added a note about device being little endian
* library renamed from libcaccard to libcacard
* squashed both of libcacard patches, they touched different files anyway.
v7-v8 changes:
* Blue Swirl comments:
* usb-ccid: deannonymize some structs
* usb-ccid: coding style change - answer_t and bulk_in_t fixed
* usb-ccid: handle endianess conversion between guest and host
* usb-ccid: s/ccid_bulk_in_copy_out/ccid_bulk_in_copy_to_guest/
* ccid-card-emulated: fix segfault if backend not specified
* ccid-card-emulated: let last reader inserted win
* libcaccard: remove double vscard_common.h
v6->v7 changes:
* external libcaccard became internal directory libcaccard
* statically link object files into qemu
* produce libcaccard.so for usage by external projects
* applied coding style to new code (please check me)
- did not use the qemu options parsing for libcaccard, since
it seems to draw large amounts of qemu code (monitor for instance).
v5->v6 changes:
* really remove static debug (I apologize for claiming to have done so before)
v4->v5 changes:
* rebased to latest
* remove static debug in card devices
* fix --enable-smartcard to link
* stall instead of assert when exceeding BULK_OUT_DATA_SIZE
* make ccid_reserve_recv_buf for too large len discard message, not exit
* make ccid_reserve_recv_buf return void*
* fix typo
* remove commented code in VMState
v3->v4:
* remove ccid field in CCIDBus
* remove static debug in bus
* add back docs
v2->v3:
* split into bus (usb-ccid.c, uses ccid.h) and card (ccid-card-passthru.c).
* removed documentation (being revised).
v1->v2:
* all QSIMPLEQ turned into fixed sized rings
* all allocated buffers turned into fixed size buffers
* added migration support
* added a message to tell client qemu has migrated to ip:port
* for lack of monitor commands ip:port are 0:0, which causes the updated
vscclient to connect to one port higher on the same host. will add monitor
commands in a separate patch. tested with current setup.
Alon Levy (6):
usb-ccid: add CCID bus
ccid: add passthru card device
ccid: add ccid-card-emulated device (v2)
ccid: add docs
ccid: configure: add --enable/disable and nss only disable
ccid: add qdev description strings
Robert Relyea (1):
libcacard: initial commit after coding style fixes
Makefile | 6 +-
Makefile.objs | 7 +
Makefile.target | 2 +
configure | 48 ++
docs/ccid.txt | 135 +++++
docs/libcacard.txt | 483 +++++++++++++++
hw/ccid-card-emulated.c | 535 +++++++++++++++++
hw/ccid-card-passthru.c | 273 +++++++++
hw/ccid.h | 35 ++
hw/usb-ccid.c | 1356 +++++++++++++++++++++++++++++++++++++++++++
libcacard/Makefile | 14 +
libcacard/cac.c | 411 +++++++++++++
libcacard/cac.h | 20 +
libcacard/card_7816.c | 780 +++++++++++++++++++++++++
libcacard/card_7816.h | 60 ++
libcacard/card_7816t.h | 163 ++++++
libcacard/config.h | 81 +++
libcacard/event.c | 112 ++++
libcacard/eventt.h | 28 +
libcacard/link_test.c | 20 +
libcacard/mutex.h | 59 ++
libcacard/passthru.c | 612 +++++++++++++++++++
libcacard/passthru.h | 50 ++
libcacard/vcard.c | 350 +++++++++++
libcacard/vcard.h | 85 +++
libcacard/vcard_emul.h | 62 ++
libcacard/vcard_emul_nss.c | 1171 +++++++++++++++++++++++++++++++++++++
libcacard/vcard_emul_type.c | 60 ++
libcacard/vcard_emul_type.h | 29 +
libcacard/vcardt.h | 66 +++
libcacard/vevent.h | 26 +
libcacard/vreader.c | 526 +++++++++++++++++
libcacard/vreader.h | 54 ++
libcacard/vreadert.h | 23 +
libcacard/vscard_common.h | 130 ++++
libcacard/vscclient.c | 710 ++++++++++++++++++++++
36 files changed, 8580 insertions(+), 2 deletions(-)
create mode 100644 docs/ccid.txt
create mode 100644 docs/libcacard.txt
create mode 100644 hw/ccid-card-emulated.c
create mode 100644 hw/ccid-card-passthru.c
create mode 100644 hw/ccid.h
create mode 100644 hw/usb-ccid.c
create mode 100644 libcacard/Makefile
create mode 100644 libcacard/cac.c
create mode 100644 libcacard/cac.h
create mode 100644 libcacard/card_7816.c
create mode 100644 libcacard/card_7816.h
create mode 100644 libcacard/card_7816t.h
create mode 100644 libcacard/config.h
create mode 100644 libcacard/event.c
create mode 100644 libcacard/eventt.h
create mode 100644 libcacard/link_test.c
create mode 100644 libcacard/mutex.h
create mode 100644 libcacard/passthru.c
create mode 100644 libcacard/passthru.h
create mode 100644 libcacard/vcard.c
create mode 100644 libcacard/vcard.h
create mode 100644 libcacard/vcard_emul.h
create mode 100644 libcacard/vcard_emul_nss.c
create mode 100644 libcacard/vcard_emul_type.c
create mode 100644 libcacard/vcard_emul_type.h
create mode 100644 libcacard/vcardt.h
create mode 100644 libcacard/vevent.h
create mode 100644 libcacard/vreader.c
create mode 100644 libcacard/vreader.h
create mode 100644 libcacard/vreadert.h
create mode 100644 libcacard/vscard_common.h
create mode 100644 libcacard/vscclient.c
--
1.7.3.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Qemu-devel] [PATCH 0/7] usb-ccid (v15)
2011-01-11 8:42 Alon Levy
@ 2011-01-17 15:56 ` Alon Levy
0 siblings, 0 replies; 3+ messages in thread
From: Alon Levy @ 2011-01-17 15:56 UTC (permalink / raw)
To: qemu-devel
Ping
On Tue, Jan 11, 2011 at 10:42:31AM +0200, Alon Levy wrote:
> This patchset adds three new devices, usb-ccid, ccid-card-passthru and
> ccid-card-emulated, providing a CCID bus, a simple passthru protocol
> implementing card requiring a client, and a standalone emulated card.
>
> It also introduces a new directory libcaccard with CAC card emulation,
> CAC is a type of ISO 7816 smart card.
>
> Tree for pull: git://anongit.freedesktop.org/~alon/qemu usb_ccid.v15
>
> v14-v15 changes:
> * add patch with --enable-smartcard and --disable-smartcard and only
> disable ccid-card-emulated if nss not found.
> * add patch with description strings
> * s/libcaccard/libcacard/ in docs/ccid.txt
>
> v13-v14 changes:
> - support device_del/device_add on ccid-card-* and usb-ccid
> * usb-ccid:
> * lose card reference when card device deleted
> * check slot number and deny adding a slot if one is already added.
> * ccid-card-*: use qdev_simple_unplug_cb in both emulated and passthru ccid cards,
> the exitfn already takes care of triggering card removal in the usb dev.
> * libcacard:
> * remove double include of config-host.mak
> * add replay of card events to libcacard to support second and more emulation
> * don't initialize more then once (doesn't support it right now, so one
> thread, NSS thread, is left when device_del is done)
> * add VCARD_EMUL_INIT_ALREADY_INITED
> * ccid-card-emulated:
> * take correct mutexes on signaling to fix deadlocks on device_del
> * allow card insertion/removal event without proper reader insertion event
>
> v12-v13 changes:
> * libcacard:
> * fix Makefile clean to remove vscclient
> * fix double include of config-host in Makefile
> * usb-ccid: remove attach/detach logic, usb is always attached. Guest
> doesn't care if there is a reader attached with no card anyway.
> * ccid-card-passthru: don't close chr_dev on removal, makes it possible
> to use device_del/device_add to create remove/insertion for debugging.
>
> v11-v12 changes:
> * fix out of tree build
>
> v10-v11 changes:
> * fix last patch that removed one of the doc files.
> * updated flow table in docs/ccid.txt
>
> v8-v10 changes:
> * usb-ccid:
> * add slot for future use (Gerd)
> * ifdef ENABLE_MIGRATION for migration support on account of usb
> migration not being ready in general. (Gerd)
> * verbosified commit messages. (Gerd)
> * put libcacard docs in libcacard commit. (Gerd)
>
> v8-v9 changes:
> * Blue Swirl comments:
> * white space fixes
> * enabled by default, disabled only if missing nss
> * forgotten fix from v8 (don't build libcacard.so)
> * added a note about device being little endian
> * library renamed from libcaccard to libcacard
> * squashed both of libcacard patches, they touched different files anyway.
>
> v7-v8 changes:
> * Blue Swirl comments:
> * usb-ccid: deannonymize some structs
> * usb-ccid: coding style change - answer_t and bulk_in_t fixed
> * usb-ccid: handle endianess conversion between guest and host
> * usb-ccid: s/ccid_bulk_in_copy_out/ccid_bulk_in_copy_to_guest/
> * ccid-card-emulated: fix segfault if backend not specified
> * ccid-card-emulated: let last reader inserted win
> * libcaccard: remove double vscard_common.h
>
> v6->v7 changes:
> * external libcaccard became internal directory libcaccard
> * statically link object files into qemu
> * produce libcaccard.so for usage by external projects
> * applied coding style to new code (please check me)
> - did not use the qemu options parsing for libcaccard, since
> it seems to draw large amounts of qemu code (monitor for instance).
>
> v5->v6 changes:
> * really remove static debug (I apologize for claiming to have done so before)
>
> v4->v5 changes:
> * rebased to latest
> * remove static debug in card devices
> * fix --enable-smartcard to link
> * stall instead of assert when exceeding BULK_OUT_DATA_SIZE
> * make ccid_reserve_recv_buf for too large len discard message, not exit
> * make ccid_reserve_recv_buf return void*
> * fix typo
> * remove commented code in VMState
>
> v3->v4:
> * remove ccid field in CCIDBus
> * remove static debug in bus
> * add back docs
>
> v2->v3:
> * split into bus (usb-ccid.c, uses ccid.h) and card (ccid-card-passthru.c).
> * removed documentation (being revised).
>
> v1->v2:
> * all QSIMPLEQ turned into fixed sized rings
> * all allocated buffers turned into fixed size buffers
> * added migration support
> * added a message to tell client qemu has migrated to ip:port
> * for lack of monitor commands ip:port are 0:0, which causes the updated
> vscclient to connect to one port higher on the same host. will add monitor
> commands in a separate patch. tested with current setup.
>
> Alon Levy (6):
> usb-ccid: add CCID bus
> ccid: add passthru card device
> ccid: add ccid-card-emulated device (v2)
> ccid: add docs
> ccid: configure: add --enable/disable and nss only disable
> ccid: add qdev description strings
>
> Robert Relyea (1):
> libcacard: initial commit after coding style fixes
>
> Makefile | 6 +-
> Makefile.objs | 7 +
> Makefile.target | 2 +
> configure | 48 ++
> docs/ccid.txt | 135 +++++
> docs/libcacard.txt | 483 +++++++++++++++
> hw/ccid-card-emulated.c | 535 +++++++++++++++++
> hw/ccid-card-passthru.c | 273 +++++++++
> hw/ccid.h | 35 ++
> hw/usb-ccid.c | 1356 +++++++++++++++++++++++++++++++++++++++++++
> libcacard/Makefile | 14 +
> libcacard/cac.c | 411 +++++++++++++
> libcacard/cac.h | 20 +
> libcacard/card_7816.c | 780 +++++++++++++++++++++++++
> libcacard/card_7816.h | 60 ++
> libcacard/card_7816t.h | 163 ++++++
> libcacard/config.h | 81 +++
> libcacard/event.c | 112 ++++
> libcacard/eventt.h | 28 +
> libcacard/link_test.c | 20 +
> libcacard/mutex.h | 59 ++
> libcacard/passthru.c | 612 +++++++++++++++++++
> libcacard/passthru.h | 50 ++
> libcacard/vcard.c | 350 +++++++++++
> libcacard/vcard.h | 85 +++
> libcacard/vcard_emul.h | 62 ++
> libcacard/vcard_emul_nss.c | 1171 +++++++++++++++++++++++++++++++++++++
> libcacard/vcard_emul_type.c | 60 ++
> libcacard/vcard_emul_type.h | 29 +
> libcacard/vcardt.h | 66 +++
> libcacard/vevent.h | 26 +
> libcacard/vreader.c | 526 +++++++++++++++++
> libcacard/vreader.h | 54 ++
> libcacard/vreadert.h | 23 +
> libcacard/vscard_common.h | 130 ++++
> libcacard/vscclient.c | 710 ++++++++++++++++++++++
> 36 files changed, 8580 insertions(+), 2 deletions(-)
> create mode 100644 docs/ccid.txt
> create mode 100644 docs/libcacard.txt
> create mode 100644 hw/ccid-card-emulated.c
> create mode 100644 hw/ccid-card-passthru.c
> create mode 100644 hw/ccid.h
> create mode 100644 hw/usb-ccid.c
> create mode 100644 libcacard/Makefile
> create mode 100644 libcacard/cac.c
> create mode 100644 libcacard/cac.h
> create mode 100644 libcacard/card_7816.c
> create mode 100644 libcacard/card_7816.h
> create mode 100644 libcacard/card_7816t.h
> create mode 100644 libcacard/config.h
> create mode 100644 libcacard/event.c
> create mode 100644 libcacard/eventt.h
> create mode 100644 libcacard/link_test.c
> create mode 100644 libcacard/mutex.h
> create mode 100644 libcacard/passthru.c
> create mode 100644 libcacard/passthru.h
> create mode 100644 libcacard/vcard.c
> create mode 100644 libcacard/vcard.h
> create mode 100644 libcacard/vcard_emul.h
> create mode 100644 libcacard/vcard_emul_nss.c
> create mode 100644 libcacard/vcard_emul_type.c
> create mode 100644 libcacard/vcard_emul_type.h
> create mode 100644 libcacard/vcardt.h
> create mode 100644 libcacard/vevent.h
> create mode 100644 libcacard/vreader.c
> create mode 100644 libcacard/vreader.h
> create mode 100644 libcacard/vreadert.h
> create mode 100644 libcacard/vscard_common.h
> create mode 100644 libcacard/vscclient.c
>
> --
> 1.7.3.4
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Qemu-devel] [PATCH 0/7] usb-ccid (v15)
@ 2011-01-11 8:42 Alon Levy
2011-01-17 15:56 ` Alon Levy
0 siblings, 1 reply; 3+ messages in thread
From: Alon Levy @ 2011-01-11 8:42 UTC (permalink / raw)
To: qemu-devel
This patchset adds three new devices, usb-ccid, ccid-card-passthru and
ccid-card-emulated, providing a CCID bus, a simple passthru protocol
implementing card requiring a client, and a standalone emulated card.
It also introduces a new directory libcaccard with CAC card emulation,
CAC is a type of ISO 7816 smart card.
Tree for pull: git://anongit.freedesktop.org/~alon/qemu usb_ccid.v15
v14-v15 changes:
* add patch with --enable-smartcard and --disable-smartcard and only
disable ccid-card-emulated if nss not found.
* add patch with description strings
* s/libcaccard/libcacard/ in docs/ccid.txt
v13-v14 changes:
- support device_del/device_add on ccid-card-* and usb-ccid
* usb-ccid:
* lose card reference when card device deleted
* check slot number and deny adding a slot if one is already added.
* ccid-card-*: use qdev_simple_unplug_cb in both emulated and passthru ccid cards,
the exitfn already takes care of triggering card removal in the usb dev.
* libcacard:
* remove double include of config-host.mak
* add replay of card events to libcacard to support second and more emulation
* don't initialize more then once (doesn't support it right now, so one
thread, NSS thread, is left when device_del is done)
* add VCARD_EMUL_INIT_ALREADY_INITED
* ccid-card-emulated:
* take correct mutexes on signaling to fix deadlocks on device_del
* allow card insertion/removal event without proper reader insertion event
v12-v13 changes:
* libcacard:
* fix Makefile clean to remove vscclient
* fix double include of config-host in Makefile
* usb-ccid: remove attach/detach logic, usb is always attached. Guest
doesn't care if there is a reader attached with no card anyway.
* ccid-card-passthru: don't close chr_dev on removal, makes it possible
to use device_del/device_add to create remove/insertion for debugging.
v11-v12 changes:
* fix out of tree build
v10-v11 changes:
* fix last patch that removed one of the doc files.
* updated flow table in docs/ccid.txt
v8-v10 changes:
* usb-ccid:
* add slot for future use (Gerd)
* ifdef ENABLE_MIGRATION for migration support on account of usb
migration not being ready in general. (Gerd)
* verbosified commit messages. (Gerd)
* put libcacard docs in libcacard commit. (Gerd)
v8-v9 changes:
* Blue Swirl comments:
* white space fixes
* enabled by default, disabled only if missing nss
* forgotten fix from v8 (don't build libcacard.so)
* added a note about device being little endian
* library renamed from libcaccard to libcacard
* squashed both of libcacard patches, they touched different files anyway.
v7-v8 changes:
* Blue Swirl comments:
* usb-ccid: deannonymize some structs
* usb-ccid: coding style change - answer_t and bulk_in_t fixed
* usb-ccid: handle endianess conversion between guest and host
* usb-ccid: s/ccid_bulk_in_copy_out/ccid_bulk_in_copy_to_guest/
* ccid-card-emulated: fix segfault if backend not specified
* ccid-card-emulated: let last reader inserted win
* libcaccard: remove double vscard_common.h
v6->v7 changes:
* external libcaccard became internal directory libcaccard
* statically link object files into qemu
* produce libcaccard.so for usage by external projects
* applied coding style to new code (please check me)
- did not use the qemu options parsing for libcaccard, since
it seems to draw large amounts of qemu code (monitor for instance).
v5->v6 changes:
* really remove static debug (I apologize for claiming to have done so before)
v4->v5 changes:
* rebased to latest
* remove static debug in card devices
* fix --enable-smartcard to link
* stall instead of assert when exceeding BULK_OUT_DATA_SIZE
* make ccid_reserve_recv_buf for too large len discard message, not exit
* make ccid_reserve_recv_buf return void*
* fix typo
* remove commented code in VMState
v3->v4:
* remove ccid field in CCIDBus
* remove static debug in bus
* add back docs
v2->v3:
* split into bus (usb-ccid.c, uses ccid.h) and card (ccid-card-passthru.c).
* removed documentation (being revised).
v1->v2:
* all QSIMPLEQ turned into fixed sized rings
* all allocated buffers turned into fixed size buffers
* added migration support
* added a message to tell client qemu has migrated to ip:port
* for lack of monitor commands ip:port are 0:0, which causes the updated
vscclient to connect to one port higher on the same host. will add monitor
commands in a separate patch. tested with current setup.
Alon Levy (6):
usb-ccid: add CCID bus
ccid: add passthru card device
ccid: add ccid-card-emulated device (v2)
ccid: add docs
ccid: configure: add --enable/disable and nss only disable
ccid: add qdev description strings
Robert Relyea (1):
libcacard: initial commit after coding style fixes
Makefile | 6 +-
Makefile.objs | 7 +
Makefile.target | 2 +
configure | 48 ++
docs/ccid.txt | 135 +++++
docs/libcacard.txt | 483 +++++++++++++++
hw/ccid-card-emulated.c | 535 +++++++++++++++++
hw/ccid-card-passthru.c | 273 +++++++++
hw/ccid.h | 35 ++
hw/usb-ccid.c | 1356 +++++++++++++++++++++++++++++++++++++++++++
libcacard/Makefile | 14 +
libcacard/cac.c | 411 +++++++++++++
libcacard/cac.h | 20 +
libcacard/card_7816.c | 780 +++++++++++++++++++++++++
libcacard/card_7816.h | 60 ++
libcacard/card_7816t.h | 163 ++++++
libcacard/config.h | 81 +++
libcacard/event.c | 112 ++++
libcacard/eventt.h | 28 +
libcacard/link_test.c | 20 +
libcacard/mutex.h | 59 ++
libcacard/passthru.c | 612 +++++++++++++++++++
libcacard/passthru.h | 50 ++
libcacard/vcard.c | 350 +++++++++++
libcacard/vcard.h | 85 +++
libcacard/vcard_emul.h | 62 ++
libcacard/vcard_emul_nss.c | 1171 +++++++++++++++++++++++++++++++++++++
libcacard/vcard_emul_type.c | 60 ++
libcacard/vcard_emul_type.h | 29 +
libcacard/vcardt.h | 66 +++
libcacard/vevent.h | 26 +
libcacard/vreader.c | 526 +++++++++++++++++
libcacard/vreader.h | 54 ++
libcacard/vreadert.h | 23 +
libcacard/vscard_common.h | 130 ++++
libcacard/vscclient.c | 710 ++++++++++++++++++++++
36 files changed, 8580 insertions(+), 2 deletions(-)
create mode 100644 docs/ccid.txt
create mode 100644 docs/libcacard.txt
create mode 100644 hw/ccid-card-emulated.c
create mode 100644 hw/ccid-card-passthru.c
create mode 100644 hw/ccid.h
create mode 100644 hw/usb-ccid.c
create mode 100644 libcacard/Makefile
create mode 100644 libcacard/cac.c
create mode 100644 libcacard/cac.h
create mode 100644 libcacard/card_7816.c
create mode 100644 libcacard/card_7816.h
create mode 100644 libcacard/card_7816t.h
create mode 100644 libcacard/config.h
create mode 100644 libcacard/event.c
create mode 100644 libcacard/eventt.h
create mode 100644 libcacard/link_test.c
create mode 100644 libcacard/mutex.h
create mode 100644 libcacard/passthru.c
create mode 100644 libcacard/passthru.h
create mode 100644 libcacard/vcard.c
create mode 100644 libcacard/vcard.h
create mode 100644 libcacard/vcard_emul.h
create mode 100644 libcacard/vcard_emul_nss.c
create mode 100644 libcacard/vcard_emul_type.c
create mode 100644 libcacard/vcard_emul_type.h
create mode 100644 libcacard/vcardt.h
create mode 100644 libcacard/vevent.h
create mode 100644 libcacard/vreader.c
create mode 100644 libcacard/vreader.h
create mode 100644 libcacard/vreadert.h
create mode 100644 libcacard/vscard_common.h
create mode 100644 libcacard/vscclient.c
--
1.7.3.4
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-01-17 15:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-11 8:38 [Qemu-devel] [PATCH 0/7] usb-ccid (v15) Alon Levy
2011-01-11 8:42 Alon Levy
2011-01-17 15:56 ` Alon Levy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.