* Driver for using MPC8572's eTSEC1&2 in 16b encoded FIFO Mode?
@ 2009-09-15 18:37 Christopher Best
2009-09-16 4:55 ` Kumar Gala
0 siblings, 1 reply; 2+ messages in thread
From: Christopher Best @ 2009-09-15 18:37 UTC (permalink / raw)
To: linuxppc-dev
On the MPC8572, eTSEC1 and eTSEC2 can be configured to jointly operate in 16-bit encoded FIFO mode. Is there currently a Linux driver for interfacing with this FIFO mode?
Thanks,
Christopher
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Driver for using MPC8572's eTSEC1&2 in 16b encoded FIFO Mode?
2009-09-15 18:37 Driver for using MPC8572's eTSEC1&2 in 16b encoded FIFO Mode? Christopher Best
@ 2009-09-16 4:55 ` Kumar Gala
0 siblings, 0 replies; 2+ messages in thread
From: Kumar Gala @ 2009-09-16 4:55 UTC (permalink / raw)
To: Christopher Best; +Cc: linuxppc-dev
On Sep 15, 2009, at 1:37 PM, Christopher Best wrote:
> On the MPC8572, eTSEC1 and eTSEC2 can be configured to jointly
> operate in 16-bit encoded FIFO mode. Is there currently a Linux
> driver for interfacing with this FIFO mode?
Not that I'm aware of. You should be able to modify drivers/net/
gianfar.c for this purpose.
- k
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-09-16 4:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-15 18:37 Driver for using MPC8572's eTSEC1&2 in 16b encoded FIFO Mode? Christopher Best
2009-09-16 4:55 ` Kumar Gala
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.