[PATCH RFC] leds: Allow heartbeat trigger to use user-defined brightness.

[PATCH RFC] leds: Allow heartbeat trigger to use user-defined brightness.

[ygeorgie]

From: Yury Georgievskiy <ygeorgie@gmail.com>

Led brightness for PWM leds can be dynamically adjusted.
GPIO leds are not affected as only on/off states are possible.

Checked with PWM leds.
Writing new value in /sys/class/leds/led-pwm::/brightness
alter PWM led brightness as expected.

Signed-off-by: Yury Georgievskiy <ygeorgie@gmail.com>
---
 drivers/leds/ledtrig-heartbeat.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/leds/ledtrig-heartbeat.c b/drivers/leds/ledtrig-heartbeat.c
index 759c0bb..74afb5a 100644
--- a/drivers/leds/ledtrig-heartbeat.c
+++ b/drivers/leds/ledtrig-heartbeat.c
@@ -48,7 +48,7 @@ static void led_heartbeat_function(unsigned long data)
 			msecs_to_jiffies(heartbeat_data->period);
 		delay = msecs_to_jiffies(70);
 		heartbeat_data->phase++;
-		brightness = led_cdev->max_brightness;
+		brightness = led_cdev->brightness;
 		break;
 	case 1:
 		delay = heartbeat_data->period / 4 - msecs_to_jiffies(70);
@@ -57,7 +57,7 @@ static void led_heartbeat_function(unsigned long data)
 	case 2:
 		delay = msecs_to_jiffies(70);
 		heartbeat_data->phase++;
-		brightness = led_cdev->max_brightness;
+		brightness = led_cdev->brightness;
 		break;
 	default:
 		delay = heartbeat_data->period - heartbeat_data->period / 4 -
@@ -66,7 +66,7 @@ static void led_heartbeat_function(unsigned long data)
 		break;
 	}

-	led_set_brightness(led_cdev, brightness);
+	led_cdev->brightness_set(led_cdev, brightness);
 	mod_timer(&heartbeat_data->timer, jiffies + delay);
 }

--
1.7.3.2