From: Rajendra Nayak <rnayak@ti.com> To: linux-omap@vger.kernel.org Cc: paul@pwsan.com, b-cousson@ti.com, khilman@ti.com, santosh.shilimkar@ti.com, linux-arm-kernel@lists.infradead.org, Rajendra Nayak <rnayak@ti.com> Subject: [PATCH 7/7] omap4: dpll: Enable auto gate control for all MX postdividers Date: Tue, 8 Feb 2011 15:40:38 +0530 [thread overview] Message-ID: <1297159838-30282-8-git-send-email-rnayak@ti.com> (raw) In-Reply-To: <1297159838-30282-7-git-send-email-rnayak@ti.com> Enable hardware gate control for all dpll MX postdividers. This requires the allow_idle/deny_idle functions to be populated for all clock nodes (mx post dividers) in clkops. Signed-off-by: Rajendra Nayak <rnayak@ti.com> --- arch/arm/mach-omap2/clock.c | 5 ++++ arch/arm/mach-omap2/clock.h | 1 + arch/arm/mach-omap2/clock44xx_data.c | 40 +++++++++++++++++----------------- 3 files changed, 26 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 909e3c5..6ec4c67 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -388,6 +388,11 @@ const struct clkops clkops_omap3_core_dpll_ops = { #endif +const struct clkops clkops_omap4_dpllmx_ops = { + .allow_idle = omap4_dpllmx_allow_gatectrl, + .deny_idle = omap4_dpllmx_deny_gatectrl, +}; + /* * OMAP2+ clock reset and init functions */ diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index c450d69..0725a6a 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -150,5 +150,6 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) extern const struct clkops clkops_omap3_noncore_dpll_ops; extern const struct clkops clkops_omap3_core_dpll_ops; +extern const struct clkops clkops_omap4_dpllmx_ops; #endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index b843b6e..157c51f 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -328,7 +328,7 @@ static struct clk dpll_abe_m2x2_ck = { .clksel = dpll_abe_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -395,7 +395,7 @@ static struct clk dpll_abe_m3x2_ck = { .clksel = dpll_abe_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -465,7 +465,7 @@ static struct clk dpll_core_m6x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -495,7 +495,7 @@ static struct clk dpll_core_m2_ck = { .clksel = dpll_core_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_CORE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -515,7 +515,7 @@ static struct clk dpll_core_m5x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -581,7 +581,7 @@ static struct clk dpll_core_m4x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -606,7 +606,7 @@ static struct clk dpll_abe_m2_ck = { .clksel = dpll_abe_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -632,7 +632,7 @@ static struct clk dpll_core_m7x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -704,7 +704,7 @@ static struct clk dpll_iva_m4x2_ck = { .clksel = dpll_iva_m4x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_IVA, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -716,7 +716,7 @@ static struct clk dpll_iva_m5x2_ck = { .clksel = dpll_iva_m4x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_IVA, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -764,7 +764,7 @@ static struct clk dpll_mpu_m2_ck = { .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -837,7 +837,7 @@ static struct clk dpll_per_m2_ck = { .clksel = dpll_per_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -861,7 +861,7 @@ static struct clk dpll_per_m2x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -887,7 +887,7 @@ static struct clk dpll_per_m4x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -899,7 +899,7 @@ static struct clk dpll_per_m5x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -911,7 +911,7 @@ static struct clk dpll_per_m6x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -923,7 +923,7 @@ static struct clk dpll_per_m7x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -979,7 +979,7 @@ static struct clk dpll_unipro_m2x2_ck = { .clksel = dpll_unipro_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -1028,7 +1028,7 @@ static struct clk dpll_usb_ck = { static struct clk dpll_usb_clkdcoldo_ck = { .name = "dpll_usb_clkdcoldo_ck", .parent = &dpll_usb_ck, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &followparent_recalc, }; @@ -1043,7 +1043,7 @@ static struct clk dpll_usb_m2_ck = { .clksel = dpll_usb_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_USB, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, -- 1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@ti.com (Rajendra Nayak) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 7/7] omap4: dpll: Enable auto gate control for all MX postdividers Date: Tue, 8 Feb 2011 15:40:38 +0530 [thread overview] Message-ID: <1297159838-30282-8-git-send-email-rnayak@ti.com> (raw) In-Reply-To: <1297159838-30282-7-git-send-email-rnayak@ti.com> Enable hardware gate control for all dpll MX postdividers. This requires the allow_idle/deny_idle functions to be populated for all clock nodes (mx post dividers) in clkops. Signed-off-by: Rajendra Nayak <rnayak@ti.com> --- arch/arm/mach-omap2/clock.c | 5 ++++ arch/arm/mach-omap2/clock.h | 1 + arch/arm/mach-omap2/clock44xx_data.c | 40 +++++++++++++++++----------------- 3 files changed, 26 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 909e3c5..6ec4c67 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -388,6 +388,11 @@ const struct clkops clkops_omap3_core_dpll_ops = { #endif +const struct clkops clkops_omap4_dpllmx_ops = { + .allow_idle = omap4_dpllmx_allow_gatectrl, + .deny_idle = omap4_dpllmx_deny_gatectrl, +}; + /* * OMAP2+ clock reset and init functions */ diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index c450d69..0725a6a 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -150,5 +150,6 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) extern const struct clkops clkops_omap3_noncore_dpll_ops; extern const struct clkops clkops_omap3_core_dpll_ops; +extern const struct clkops clkops_omap4_dpllmx_ops; #endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index b843b6e..157c51f 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -328,7 +328,7 @@ static struct clk dpll_abe_m2x2_ck = { .clksel = dpll_abe_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -395,7 +395,7 @@ static struct clk dpll_abe_m3x2_ck = { .clksel = dpll_abe_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -465,7 +465,7 @@ static struct clk dpll_core_m6x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -495,7 +495,7 @@ static struct clk dpll_core_m2_ck = { .clksel = dpll_core_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_CORE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -515,7 +515,7 @@ static struct clk dpll_core_m5x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -581,7 +581,7 @@ static struct clk dpll_core_m4x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -606,7 +606,7 @@ static struct clk dpll_abe_m2_ck = { .clksel = dpll_abe_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -632,7 +632,7 @@ static struct clk dpll_core_m7x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -704,7 +704,7 @@ static struct clk dpll_iva_m4x2_ck = { .clksel = dpll_iva_m4x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_IVA, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -716,7 +716,7 @@ static struct clk dpll_iva_m5x2_ck = { .clksel = dpll_iva_m4x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_IVA, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -764,7 +764,7 @@ static struct clk dpll_mpu_m2_ck = { .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -837,7 +837,7 @@ static struct clk dpll_per_m2_ck = { .clksel = dpll_per_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -861,7 +861,7 @@ static struct clk dpll_per_m2x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -887,7 +887,7 @@ static struct clk dpll_per_m4x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -899,7 +899,7 @@ static struct clk dpll_per_m5x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -911,7 +911,7 @@ static struct clk dpll_per_m6x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -923,7 +923,7 @@ static struct clk dpll_per_m7x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -979,7 +979,7 @@ static struct clk dpll_unipro_m2x2_ck = { .clksel = dpll_unipro_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -1028,7 +1028,7 @@ static struct clk dpll_usb_ck = { static struct clk dpll_usb_clkdcoldo_ck = { .name = "dpll_usb_clkdcoldo_ck", .parent = &dpll_usb_ck, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &followparent_recalc, }; @@ -1043,7 +1043,7 @@ static struct clk dpll_usb_m2_ck = { .clksel = dpll_usb_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_USB, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, -- 1.7.0.4
next prev parent reply other threads:[~2011-02-08 10:10 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-02-08 10:10 [PATCH 0/7] clock/dpll autoidle support Rajendra Nayak 2011-02-08 10:10 ` Rajendra Nayak 2011-02-08 10:10 ` [PATCH 1/7] omap: clock: Check for enable/disable ops support Rajendra Nayak 2011-02-08 10:10 ` Rajendra Nayak 2011-02-08 10:10 ` [PATCH 2/7] omap3: dpll: Populate clkops for dpll1_ck Rajendra Nayak 2011-02-08 10:10 ` Rajendra Nayak 2011-02-08 10:10 ` [PATCH 3/7] omap: clock: Add allow_idle/deny_idle support in clkops Rajendra Nayak 2011-02-08 10:10 ` Rajendra Nayak 2011-02-08 10:10 ` [PATCH 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's Rajendra Nayak 2011-02-08 10:10 ` Rajendra Nayak 2011-02-08 10:10 ` [PATCH 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot Rajendra Nayak 2011-02-08 10:10 ` Rajendra Nayak 2011-02-08 10:10 ` [PATCH 6/7] omap4: dpll: Add dpll api to control GATE_CTRL Rajendra Nayak 2011-02-08 10:10 ` Rajendra Nayak 2011-02-08 10:10 ` Rajendra Nayak [this message] 2011-02-08 10:10 ` [PATCH 7/7] omap4: dpll: Enable auto gate control for all MX postdividers Rajendra Nayak 2011-02-12 23:18 ` [PATCH 2/7] omap3: dpll: Populate clkops for dpll1_ck Paul Walmsley 2011-02-12 23:18 ` Paul Walmsley 2011-02-12 23:17 ` [PATCH 1/7] omap: clock: Check for enable/disable ops support Paul Walmsley 2011-02-12 23:17 ` Paul Walmsley 2011-02-14 12:15 ` Rajendra Nayak 2011-02-14 12:15 ` Rajendra Nayak 2011-02-14 16:49 ` Paul Walmsley 2011-02-14 16:49 ` Paul Walmsley 2011-02-10 8:59 ` [PATCH 0/7] clock/dpll autoidle support Rajendra Nayak 2011-02-10 8:59 ` Rajendra Nayak
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1297159838-30282-8-git-send-email-rnayak@ti.com \ --to=rnayak@ti.com \ --cc=b-cousson@ti.com \ --cc=khilman@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=paul@pwsan.com \ --cc=santosh.shilimkar@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.