* [PATCH 1/2] atmel_lcdfb: implement inverted contrast pwm
@ 2011-02-11 15:19 ` Andreas Bießmann
0 siblings, 0 replies; 4+ messages in thread
From: Andreas Bießmann @ 2011-02-11 15:19 UTC (permalink / raw)
To: kernel
Cc: Nicolas Ferre, Andreas Bießmann,
open list:ATMEL LCDFB DRIVER, open list
This patch introduces lcdc->lcdcon_pol_negative which set CONTRAST_CTR
register to inverted polarity.
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
---
These are some older patches which are used in some of our systems. Heavy
merging pointed out these functionality was missed to push upstream.
drivers/video/atmel_lcdfb.c | 7 ++++++-
include/video/atmel_lcdc.h | 1 +
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index bac16345..16da8af 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -68,7 +68,7 @@ static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
}
#endif
-static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
+static u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
| ATMEL_LCDC_POL_POSITIVE
| ATMEL_LCDC_ENA_PWMENABLE;
@@ -163,6 +163,10 @@ static void exit_backlight(struct atmel_lcdfb_info *sinfo)
static void init_contrast(struct atmel_lcdfb_info *sinfo)
{
+ /* contrast pwm can be 'inverted' */
+ if (sinfo->lcdcon_pol_negative)
+ contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
+
/* have some default contrast/backlight settings */
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
@@ -816,6 +820,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
sinfo->guard_time = pdata_sinfo->guard_time;
sinfo->smem_len = pdata_sinfo->smem_len;
sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
+ sinfo->lcdcon_pol_negative = pdata_sinfo->lcdcon_pol_negative;
sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
} else {
dev_err(dev, "cannot get default configuration\n");
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 0c864db..28447f1 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -52,6 +52,7 @@ struct atmel_lcdfb_info {
u8 bl_power;
#endif
bool lcdcon_is_backlight;
+ bool lcdcon_pol_negative;
u8 saved_lcdcon;
u8 default_bpp;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 1/2] atmel_lcdfb: implement inverted contrast pwm
@ 2011-02-11 15:19 ` Andreas Bießmann
0 siblings, 0 replies; 4+ messages in thread
From: Andreas Bießmann @ 2011-02-11 15:19 UTC (permalink / raw)
To: kernel
Cc: Nicolas Ferre, Andreas Bießmann,
open list:ATMEL LCDFB DRIVER, open list
This patch introduces lcdc->lcdcon_pol_negative which set CONTRAST_CTR
register to inverted polarity.
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
---
These are some older patches which are used in some of our systems. Heavy
merging pointed out these functionality was missed to push upstream.
drivers/video/atmel_lcdfb.c | 7 ++++++-
include/video/atmel_lcdc.h | 1 +
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index bac16345..16da8af 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -68,7 +68,7 @@ static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
}
#endif
-static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
+static u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
| ATMEL_LCDC_POL_POSITIVE
| ATMEL_LCDC_ENA_PWMENABLE;
@@ -163,6 +163,10 @@ static void exit_backlight(struct atmel_lcdfb_info *sinfo)
static void init_contrast(struct atmel_lcdfb_info *sinfo)
{
+ /* contrast pwm can be 'inverted' */
+ if (sinfo->lcdcon_pol_negative)
+ contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
+
/* have some default contrast/backlight settings */
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
@@ -816,6 +820,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
sinfo->guard_time = pdata_sinfo->guard_time;
sinfo->smem_len = pdata_sinfo->smem_len;
sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
+ sinfo->lcdcon_pol_negative = pdata_sinfo->lcdcon_pol_negative;
sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
} else {
dev_err(dev, "cannot get default configuration\n");
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 0c864db..28447f1 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -52,6 +52,7 @@ struct atmel_lcdfb_info {
u8 bl_power;
#endif
bool lcdcon_is_backlight;
+ bool lcdcon_pol_negative;
u8 saved_lcdcon;
u8 default_bpp;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] atmel_lcdfb: add fb_blank function
2011-02-11 15:19 ` Andreas Bießmann
@ 2011-02-11 15:19 ` Andreas Bießmann
-1 siblings, 0 replies; 4+ messages in thread
From: Andreas Bießmann @ 2011-02-11 15:19 UTC (permalink / raw)
To: kernel
Cc: Nicolas Ferre, Andreas Bießmann,
open list:ATMEL LCDFB DRIVER, open list
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
---
These are some older patches which are used in some of our systems. Heavy
merging pointed out these functionality was missed to push upstream.
drivers/video/atmel_lcdfb.c | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 16da8af..59654e2 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -714,11 +714,35 @@ static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
return 0;
}
+static int atmel_lcdfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct atmel_lcdfb_info *sinfo = info->par;
+
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ atmel_lcdfb_start(sinfo);
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ break;
+ case FB_BLANK_POWERDOWN:
+ atmel_lcdfb_stop(sinfo);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* let fbcon do a soft blank for us */
+ return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0);
+}
+
static struct fb_ops atmel_lcdfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = atmel_lcdfb_check_var,
.fb_set_par = atmel_lcdfb_set_par,
.fb_setcolreg = atmel_lcdfb_setcolreg,
+ .fb_blank = atmel_lcdfb_blank,
.fb_pan_display = atmel_lcdfb_pan_display,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] atmel_lcdfb: add fb_blank function
@ 2011-02-11 15:19 ` Andreas Bießmann
0 siblings, 0 replies; 4+ messages in thread
From: Andreas Bießmann @ 2011-02-11 15:19 UTC (permalink / raw)
To: kernel
Cc: Nicolas Ferre, Andreas Bießmann,
open list:ATMEL LCDFB DRIVER, open list
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
---
These are some older patches which are used in some of our systems. Heavy
merging pointed out these functionality was missed to push upstream.
drivers/video/atmel_lcdfb.c | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 16da8af..59654e2 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -714,11 +714,35 @@ static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
return 0;
}
+static int atmel_lcdfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct atmel_lcdfb_info *sinfo = info->par;
+
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ atmel_lcdfb_start(sinfo);
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ break;
+ case FB_BLANK_POWERDOWN:
+ atmel_lcdfb_stop(sinfo);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* let fbcon do a soft blank for us */
+ return ((blank_mode = FB_BLANK_NORMAL) ? 1 : 0);
+}
+
static struct fb_ops atmel_lcdfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = atmel_lcdfb_check_var,
.fb_set_par = atmel_lcdfb_set_par,
.fb_setcolreg = atmel_lcdfb_setcolreg,
+ .fb_blank = atmel_lcdfb_blank,
.fb_pan_display = atmel_lcdfb_pan_display,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-02-11 15:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-11 15:19 [PATCH 1/2] atmel_lcdfb: implement inverted contrast pwm Andreas Bießmann
2011-02-11 15:19 ` Andreas Bießmann
2011-02-11 15:19 ` [PATCH 2/2] atmel_lcdfb: add fb_blank function Andreas Bießmann
2011-02-11 15:19 ` Andreas Bießmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.