* ath9k stopped queue bug
@ 2011-02-22 16:01 Denis 'GNUtoo' Carikli
2011-02-23 5:34 ` [ath9k-devel] " Mohammed Shafi
2011-02-28 5:14 ` Senthil Balasubramanian
0 siblings, 2 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-02-22 16:01 UTC (permalink / raw)
To: linux-wireless
Hi,
When I transfer large files at high speed(rsync to my x86 router,
locally, not trough the Internet) I get:
ping: sendmsg: No buffer space available
And I can't send anymore data.
/sys/kernel/debug/ieee80211/phy*/queues is
00: 0x00000000/0
01: 0x00000000/0
02: 0x00000000/0
03: 0x00000000/0
In normal conditions.
But when I can't send anymore data I've that:
00: 0x00000000/0
01: 0x00000000/0
02: 0x00000001/0
03: 0x00000000/0
or that:
00: 0x00000000/0
01: 0x00000000/0
02: 0x00000001/333
03: 0x00000000/0
Here's my irc conversation in #linux-wireless on Freeenode about that
issue:
Feb 22 16:28:38 <GNUtoo|laptop> hi,
Feb 22 16:29:23 <GNUtoo|laptop> when I rsync to my router at high speed
over wifi, huge amount of data, I've that:
Feb 22 16:29:24 <GNUtoo|laptop> ping: sendmsg: No buffer space available
Feb 22 16:29:27 <GNUtoo|laptop> and wifi breaks
Feb 22 16:29:30 <GNUtoo|laptop> I've to reconnect
Feb 22 16:29:40 <GNUtoo|laptop> should I try setting a lower MTU?
Feb 22 16:29:43 <GNUtoo|laptop> what should I try?
Feb 22 16:29:53 <GNUtoo|laptop> and why isn't there any more buffer
space?
Feb 22 16:31:57 <johill> sounds like a queue management bug
Feb 22 16:32:06 <johill> with packets stuck somewhere
Feb 22 16:32:09 <johill> what driver?
Feb 22 16:34:04 * an-t (~ant@srv1.gnpx.net) has joined #linux-wireless
Feb 22 16:34:42 <GNUtoo|laptop> ath9k
Feb 22 16:34:51 <GNUtoo|laptop> on 2.6.37-020637-generic
Feb 22 16:34:57 <GNUtoo|laptop> I think that's mainline
Feb 22 16:35:01 <GNUtoo|laptop> let me check
Feb 22 16:35:02 <johill> hm, dunno
Feb 22 16:35:09 <johill> there were some queue mgmt things there
Feb 22 16:35:12 <johill> don't really konw
Feb 22 16:35:49 <Chainsaw> GNUtoo|laptop: Probably useful to share your
driver DDoS on linux-wireless; some idea of how many files & what size.
Feb 22 16:36:10 <GNUtoo|laptop> basically what I do is that:
Feb 22 16:36:20 <GNUtoo|laptop> I use openembedded to cross-compile
files
Feb 22 16:36:25 <GNUtoo|laptop> and sync the result with my router
Feb 22 16:36:26 * Blues-Man
(~bluesman@host137-190-dynamic.43-79-r.retail.telecomitalia.it) has
joined #linux-wireless
Feb 22 16:36:35 <GNUtoo|laptop> that is an x86 computer with ath9k and
hostapd
Feb 22 16:36:52 <GNUtoo|laptop>
cd /home/gnutoo/embedded/oe/oetmps/eee701/deploy/glibc
Feb 22 16:36:56 <GNUtoo|laptop> rsync -av -e "ssh -l gnutoo -p 222" *
router:/var/www/gnutoo.homelinux.org/openembedded/eee701
Feb 22 16:37:05 <GNUtoo|laptop> is the script I use to sync it
Feb 22 16:37:37 <johill> I bet when this happens you never get a ping
pcket through
Feb 22 16:38:10 <johill> and /sys/kernel/debug/ieee80211/phy*/queues is
non-zero
Feb 22 16:38:18 <johill> the info from that file would be useful
Feb 22 16:38:37 <GNUtoo|laptop> ok I was pastebining the file sizes
Feb 22 16:38:41 <GNUtoo|laptop> as there are a lot of files....
Feb 22 16:39:06 <GNUtoo|laptop> ok I'll try to reproduce
Feb 22 16:39:13 <GNUtoo|laptop> tough that will disconnect me from irc
Feb 22 16:40:54 <johill> I bet it'll be 0x0001/n
Feb 22 16:40:56 <johill> n > 0
Feb 22 16:42:16 <GNUtoo|laptop> ping also increase during the huge
transfer
Feb 22 16:42:30 <johill> that's "bufferbloat" but expected now
Feb 22 16:42:35 <GNUtoo|laptop> ok
Feb 22 16:42:49 <GNUtoo|laptop> I learned what bufferbloat was not so
long ago
Feb 22 16:44:27 * Topic for #linux-wireless is: User-level discussions
about wireless LANs on Linux | compat-wireless-2.6 only available for
kernels >= 2.6.27, work is underway to enable older kernels now that we
don't use multiqueue on mac80211
Feb 22 16:44:27 * Topic for #linux-wireless set by linville at Wed Jul
8 21:06:20 2009
Feb 22 16:44:30 <GNUtoo|laptop> it starts with
Feb 22 16:44:32 <GNUtoo|laptop> 02: 0x00000001/0
Feb 22 16:44:41 <GNUtoo|laptop> and then increase to
Feb 22 16:44:47 <GNUtoo|laptop> 02: 0x00000001/333
Feb 22 16:44:50 <GNUtoo|laptop> the reset is 0
Feb 22 16:45:02 <johill> yeah
Feb 22 16:45:06 <johill> as expected
Feb 22 16:45:08 <GNUtoo|laptop> ok
Feb 22 16:45:12 <GNUtoo|laptop> what's that exactly?
Feb 22 16:45:19 <johill> the reason why the queue is stopped
Feb 22 16:45:23 <johill> and the number of packets in the queue
Feb 22 16:45:24 <GNUtoo|laptop> oh nice
Feb 22 16:45:32 <johill> 0x000 == not stopped
Feb 22 16:45:35 <GNUtoo|laptop> ok
Feb 22 16:45:39 <GNUtoo|laptop> and what's the reason?
Feb 22 16:45:41 <johill> /0 = no packets
Feb 22 16:45:54 <johill> BIT(0) == driver asked for queue to be stopped
Feb 22 16:46:03 <johill> (IEEE80211_QUEUE_STOP_REASON_DRIVER)
Feb 22 16:46:08 <GNUtoo|laptop> ok
Feb 22 16:46:11 <johill> (net/mac80211/ieee80211_i.h)
Feb 22 16:46:15 <johill> so driver's fault
Feb 22 16:46:28 <GNUtoo|laptop> dmesg shows nothing tough
Feb 22 16:46:37 <GNUtoo|laptop> only normal stuff
Feb 22 16:46:38 <johill> yeah not surprising either
Feb 22 16:46:45 <GNUtoo|laptop> ah debugfs?
Feb 22 16:46:47 <johill> queue start/stop happens often enough, no
logging for it
Feb 22 16:46:50 <GNUtoo|laptop> or something like that should be used
Feb 22 16:46:50 <GNUtoo|laptop> ok
Feb 22 16:49:45 <GNUtoo|laptop> what should I do now?
Feb 22 16:50:10 <johill> report a bug on ath9k
Denis.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-02-22 16:01 ath9k stopped queue bug Denis 'GNUtoo' Carikli
@ 2011-02-23 5:34 ` Mohammed Shafi
2011-02-28 5:14 ` Senthil Balasubramanian
1 sibling, 0 replies; 18+ messages in thread
From: Mohammed Shafi @ 2011-02-23 5:34 UTC (permalink / raw)
To: Denis 'GNUtoo' Carikli; +Cc: linux-wireless, ath9k-devel
On Tue, Feb 22, 2011 at 9:31 PM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
> Hi,
>
> When I transfer large files at high speed(rsync to my x86 router,
> locally, not trough the Internet) I get:
> ping: sendmsg: No buffer space available
>
> And I can't send anymore data.
>
> /sys/kernel/debug/ieee80211/phy*/queues is
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000000/0
> 03: 0x00000000/0
> In normal conditions.
>
> But when I can't send anymore data I've that:
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000001/0
> 03: 0x00000000/0
> or that:
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000001/333
> 03: 0x00000000/0
>
>
> Here's my irc conversation in #linux-wireless on Freeenode about that
> issue:
>
> Feb 22 16:28:38 <GNUtoo|laptop> hi,
> Feb 22 16:29:23 <GNUtoo|laptop> when I rsync to my router at high speed
> over wifi, huge amount of data, I've that:
> Feb 22 16:29:24 <GNUtoo|laptop> ping: sendmsg: No buffer space available
> Feb 22 16:29:27 <GNUtoo|laptop> and wifi breaks
> Feb 22 16:29:30 <GNUtoo|laptop> I've to reconnect
> Feb 22 16:29:40 <GNUtoo|laptop> should I try setting a lower MTU?
> Feb 22 16:29:43 <GNUtoo|laptop> what should I try?
> Feb 22 16:29:53 <GNUtoo|laptop> and why isn't there any more buffer
> space?
> Feb 22 16:31:57 <johill> sounds like a queue management bug
> Feb 22 16:32:06 <johill> with packets stuck somewhere
> Feb 22 16:32:09 <johill> what driver?
> Feb 22 16:34:04 * an-t (~ant@srv1.gnpx.net) has joined #linux-wireless
> Feb 22 16:34:42 <GNUtoo|laptop> ath9k
> Feb 22 16:34:51 <GNUtoo|laptop> on 2.6.37-020637-generic
> Feb 22 16:34:57 <GNUtoo|laptop> I think that's mainline
> Feb 22 16:35:01 <GNUtoo|laptop> let me check
> Feb 22 16:35:02 <johill> hm, dunno
> Feb 22 16:35:09 <johill> there were some queue mgmt things there
> Feb 22 16:35:12 <johill> don't really konw
> Feb 22 16:35:49 <Chainsaw> GNUtoo|laptop: Probably useful to share your
> driver DDoS on linux-wireless; some idea of how many files & what size.
> Feb 22 16:36:10 <GNUtoo|laptop> basically what I do is that:
> Feb 22 16:36:20 <GNUtoo|laptop> I use openembedded to cross-compile
> files
> Feb 22 16:36:25 <GNUtoo|laptop> and sync the result with my router
> Feb 22 16:36:26 * Blues-Man
> (~bluesman@host137-190-dynamic.43-79-r.retail.telecomitalia.it) has
> joined #linux-wireless
> Feb 22 16:36:35 <GNUtoo|laptop> that is an x86 computer with ath9k and
> hostapd
> Feb 22 16:36:52 <GNUtoo|laptop>
> cd /home/gnutoo/embedded/oe/oetmps/eee701/deploy/glibc
> Feb 22 16:36:56 <GNUtoo|laptop> rsync -av -e "ssh -l gnutoo -p 222" *
> router:/var/www/gnutoo.homelinux.org/openembedded/eee701
> Feb 22 16:37:05 <GNUtoo|laptop> is the script I use to sync it
> Feb 22 16:37:37 <johill> I bet when this happens you never get a ping
> pcket through
> Feb 22 16:38:10 <johill> and /sys/kernel/debug/ieee80211/phy*/queues is
> non-zero
> Feb 22 16:38:18 <johill> the info from that file would be useful
> Feb 22 16:38:37 <GNUtoo|laptop> ok I was pastebining the file sizes
> Feb 22 16:38:41 <GNUtoo|laptop> as there are a lot of files....
> Feb 22 16:39:06 <GNUtoo|laptop> ok I'll try to reproduce
> Feb 22 16:39:13 <GNUtoo|laptop> tough that will disconnect me from irc
> Feb 22 16:40:54 <johill> I bet it'll be 0x0001/n
> Feb 22 16:40:56 <johill> n > 0
> Feb 22 16:42:16 <GNUtoo|laptop> ping also increase during the huge
> transfer
> Feb 22 16:42:30 <johill> that's "bufferbloat" but expected now
> Feb 22 16:42:35 <GNUtoo|laptop> ok
> Feb 22 16:42:49 <GNUtoo|laptop> I learned what bufferbloat was not so
> long ago
> Feb 22 16:44:27 * Topic for #linux-wireless is: User-level discussions
> about wireless LANs on Linux | compat-wireless-2.6 only available for
> kernels >= 2.6.27, work is underway to enable older kernels now that we
> don't use multiqueue on mac80211
> Feb 22 16:44:27 * Topic for #linux-wireless set by linville at Wed Jul
> 8 21:06:20 2009
> Feb 22 16:44:30 <GNUtoo|laptop> it starts with
> Feb 22 16:44:32 <GNUtoo|laptop> 02: 0x00000001/0
> Feb 22 16:44:41 <GNUtoo|laptop> and then increase to
> Feb 22 16:44:47 <GNUtoo|laptop> 02: 0x00000001/333
> Feb 22 16:44:50 <GNUtoo|laptop> the reset is 0
> Feb 22 16:45:02 <johill> yeah
> Feb 22 16:45:06 <johill> as expected
> Feb 22 16:45:08 <GNUtoo|laptop> ok
> Feb 22 16:45:12 <GNUtoo|laptop> what's that exactly?
> Feb 22 16:45:19 <johill> the reason why the queue is stopped
> Feb 22 16:45:23 <johill> and the number of packets in the queue
> Feb 22 16:45:24 <GNUtoo|laptop> oh nice
> Feb 22 16:45:32 <johill> 0x000 == not stopped
> Feb 22 16:45:35 <GNUtoo|laptop> ok
> Feb 22 16:45:39 <GNUtoo|laptop> and what's the reason?
> Feb 22 16:45:41 <johill> /0 = no packets
> Feb 22 16:45:54 <johill> BIT(0) == driver asked for queue to be stopped
> Feb 22 16:46:03 <johill> (IEEE80211_QUEUE_STOP_REASON_DRIVER)
> Feb 22 16:46:08 <GNUtoo|laptop> ok
> Feb 22 16:46:11 <johill> (net/mac80211/ieee80211_i.h)
> Feb 22 16:46:15 <johill> so driver's fault
> Feb 22 16:46:28 <GNUtoo|laptop> dmesg shows nothing tough
> Feb 22 16:46:37 <GNUtoo|laptop> only normal stuff
> Feb 22 16:46:38 <johill> yeah not surprising either
> Feb 22 16:46:45 <GNUtoo|laptop> ah debugfs?
> Feb 22 16:46:47 <johill> queue start/stop happens often enough, no
> logging for it
> Feb 22 16:46:50 <GNUtoo|laptop> or something like that should be used
> Feb 22 16:46:50 <GNUtoo|laptop> ok
> Feb 22 16:49:45 <GNUtoo|laptop> what should I do now?
> Feb 22 16:50:10 <johill> report a bug on ath9k
>
please try with debug messages enabled sudo modprobe ath9k debug=0x2
(or)
sudo modprobe debug=0x82 (this produces lots of log)
> Denis.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] ath9k stopped queue bug
@ 2011-02-23 5:34 ` Mohammed Shafi
0 siblings, 0 replies; 18+ messages in thread
From: Mohammed Shafi @ 2011-02-23 5:34 UTC (permalink / raw)
To: ath9k-devel
On Tue, Feb 22, 2011 at 9:31 PM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
> Hi,
>
> When I transfer large files at high speed(rsync to my x86 router,
> locally, not trough the Internet) I get:
> ping: sendmsg: No buffer space available
>
> And I can't send anymore data.
>
> /sys/kernel/debug/ieee80211/phy*/queues is
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000000/0
> 03: 0x00000000/0
> In normal conditions.
>
> But when I can't send anymore data I've that:
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000001/0
> 03: 0x00000000/0
> or that:
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000001/333
> 03: 0x00000000/0
>
>
> Here's my irc conversation in #linux-wireless on Freeenode about that
> issue:
>
> Feb 22 16:28:38 <GNUtoo|laptop> hi,
> Feb 22 16:29:23 <GNUtoo|laptop> when I rsync to my router at high speed
> over wifi, huge amount of data, I've that:
> Feb 22 16:29:24 <GNUtoo|laptop> ping: sendmsg: No buffer space available
> Feb 22 16:29:27 <GNUtoo|laptop> and wifi breaks
> Feb 22 16:29:30 <GNUtoo|laptop> I've to reconnect
> Feb 22 16:29:40 <GNUtoo|laptop> should I try setting a lower MTU?
> Feb 22 16:29:43 <GNUtoo|laptop> what should I try?
> Feb 22 16:29:53 <GNUtoo|laptop> and why isn't there any more buffer
> space?
> Feb 22 16:31:57 <johill> ? ? ? ?sounds like a queue management bug
> Feb 22 16:32:06 <johill> ? ? ? ?with packets stuck somewhere
> Feb 22 16:32:09 <johill> ? ? ? ?what driver?
> Feb 22 16:34:04 * ? ? ? an-t (~ant at srv1.gnpx.net) has joined #linux-wireless
> Feb 22 16:34:42 <GNUtoo|laptop> ath9k
> Feb 22 16:34:51 <GNUtoo|laptop> on 2.6.37-020637-generic
> Feb 22 16:34:57 <GNUtoo|laptop> I think that's mainline
> Feb 22 16:35:01 <GNUtoo|laptop> let me check
> Feb 22 16:35:02 <johill> ? ? ? ?hm, dunno
> Feb 22 16:35:09 <johill> ? ? ? ?there were some queue mgmt things there
> Feb 22 16:35:12 <johill> ? ? ? ?don't really konw
> Feb 22 16:35:49 <Chainsaw> ? ? ?GNUtoo|laptop: Probably useful to share your
> driver DDoS on linux-wireless; some idea of how many files & what size.
> Feb 22 16:36:10 <GNUtoo|laptop> basically what I do is that:
> Feb 22 16:36:20 <GNUtoo|laptop> I use openembedded to cross-compile
> files
> Feb 22 16:36:25 <GNUtoo|laptop> and sync the result with my router
> Feb 22 16:36:26 * ? ? ? Blues-Man
> (~bluesman at host137-190-dynamic.43-79-r.retail.telecomitalia.it) has
> joined #linux-wireless
> Feb 22 16:36:35 <GNUtoo|laptop> that is an x86 computer with ath9k and
> hostapd
> Feb 22 16:36:52 <GNUtoo|laptop>
> cd /home/gnutoo/embedded/oe/oetmps/eee701/deploy/glibc
> Feb 22 16:36:56 <GNUtoo|laptop> rsync -av -e "ssh -l gnutoo -p 222" *
> router:/var/www/gnutoo.homelinux.org/openembedded/eee701
> Feb 22 16:37:05 <GNUtoo|laptop> is the script I use to sync it
> Feb 22 16:37:37 <johill> ? ? ? ?I bet when this happens you never get a ping
> pcket through
> Feb 22 16:38:10 <johill> ? ? ? ?and /sys/kernel/debug/ieee80211/phy*/queues is
> non-zero
> Feb 22 16:38:18 <johill> ? ? ? ?the info from that file would be useful
> Feb 22 16:38:37 <GNUtoo|laptop> ok I was pastebining the file sizes
> Feb 22 16:38:41 <GNUtoo|laptop> as there are a lot of files....
> Feb 22 16:39:06 <GNUtoo|laptop> ok I'll try to reproduce
> Feb 22 16:39:13 <GNUtoo|laptop> tough that will disconnect me from irc
> Feb 22 16:40:54 <johill> ? ? ? ?I bet it'll be 0x0001/n
> Feb 22 16:40:56 <johill> ? ? ? ?n > 0
> Feb 22 16:42:16 <GNUtoo|laptop> ping also increase during the huge
> transfer
> Feb 22 16:42:30 <johill> ? ? ? ?that's "bufferbloat" but expected now
> Feb 22 16:42:35 <GNUtoo|laptop> ok
> Feb 22 16:42:49 <GNUtoo|laptop> I learned what bufferbloat was not so
> long ago
> Feb 22 16:44:27 * ? ? ? Topic for #linux-wireless is: User-level discussions
> about wireless LANs on Linux | compat-wireless-2.6 only available for
> kernels >= 2.6.27, work is underway to enable older kernels now that we
> don't use multiqueue on mac80211
> Feb 22 16:44:27 * ? ? ? Topic for #linux-wireless set by linville at Wed Jul
> 8 21:06:20 2009
> Feb 22 16:44:30 <GNUtoo|laptop> it starts with
> Feb 22 16:44:32 <GNUtoo|laptop> 02: 0x00000001/0
> Feb 22 16:44:41 <GNUtoo|laptop> and then increase to
> Feb 22 16:44:47 <GNUtoo|laptop> 02: 0x00000001/333
> Feb 22 16:44:50 <GNUtoo|laptop> the reset is 0
> Feb 22 16:45:02 <johill> ? ? ? ?yeah
> Feb 22 16:45:06 <johill> ? ? ? ?as expected
> Feb 22 16:45:08 <GNUtoo|laptop> ok
> Feb 22 16:45:12 <GNUtoo|laptop> what's that exactly?
> Feb 22 16:45:19 <johill> ? ? ? ?the reason why the queue is stopped
> Feb 22 16:45:23 <johill> ? ? ? ?and the number of packets in the queue
> Feb 22 16:45:24 <GNUtoo|laptop> oh nice
> Feb 22 16:45:32 <johill> ? ? ? ?0x000 == not stopped
> Feb 22 16:45:35 <GNUtoo|laptop> ok
> Feb 22 16:45:39 <GNUtoo|laptop> and what's the reason?
> Feb 22 16:45:41 <johill> ? ? ? ? /0 = no packets
> Feb 22 16:45:54 <johill> ? ? ? ?BIT(0) == driver asked for queue to be stopped
> Feb 22 16:46:03 <johill> ? ? ? ?(IEEE80211_QUEUE_STOP_REASON_DRIVER)
> Feb 22 16:46:08 <GNUtoo|laptop> ok
> Feb 22 16:46:11 <johill> ? ? ? ?(net/mac80211/ieee80211_i.h)
> Feb 22 16:46:15 <johill> ? ? ? ?so driver's fault
> Feb 22 16:46:28 <GNUtoo|laptop> dmesg shows nothing tough
> Feb 22 16:46:37 <GNUtoo|laptop> only normal stuff
> Feb 22 16:46:38 <johill> ? ? ? ?yeah not surprising either
> Feb 22 16:46:45 <GNUtoo|laptop> ah debugfs?
> Feb 22 16:46:47 <johill> ? ? ? ?queue start/stop happens often enough, no
> logging for it
> Feb 22 16:46:50 <GNUtoo|laptop> or something like that should be used
> Feb 22 16:46:50 <GNUtoo|laptop> ok
> Feb 22 16:49:45 <GNUtoo|laptop> what should I do now?
> Feb 22 16:50:10 <johill> ? ? ? ?report a bug on ath9k
>
please try with debug messages enabled sudo modprobe ath9k debug=0x2
(or)
sudo modprobe debug=0x82 (this produces lots of log)
> Denis.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-02-23 5:34 ` [ath9k-devel] " Mohammed Shafi
@ 2011-02-26 18:44 ` Denis 'GNUtoo' Carikli
-1 siblings, 0 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-02-26 18:44 UTC (permalink / raw)
To: Mohammed Shafi; +Cc: linux-wireless, ath9k-devel
On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
> please try with debug messages enabled sudo modprobe ath9k debug=0x2
> (or)
> sudo modprobe debug=0x82 (this produces lots of log)
I unloaded, reloaded with debug= the ath9k module, then I connected to
the AP and I didn't see any supplementary message:
root@gnutoo-laptop:~# modinfo ath9k
filename: /lib/modules/2.6.37-020637-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
license: Dual BSD/GPL
description: Support for Atheros 802.11n wireless LAN cards.
author: Atheros Communications
srcversion: 9F79F17BF7FC245D5B37879
alias: pci:v0000168Cd00000030sv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i*
alias: pci:v0000168Cd00000029sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000027sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000024sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000023sv*sd*bc*sc*i*
depends: ath9k_hw,mac80211,cfg80211,ath9k_common,ath
vermagic: 2.6.37-020637-generic SMP mod_unload modversions
parm: debug:Debugging mask (uint)
parm: nohwcrypt:Disable hardware encryption (int)
parm: blink:Enable LED blink on activity (int)
root@gnutoo-laptop:~# lsmod | grep ath9k
ath9k_common 3151 0
ath9k_hw 288200 1 ath9k_common
ath 17109 1 ath9k_hw
root@gnutoo-laptop:~# modprobe ath9k debug=0x82
[...] #connect to the open AP with network manager
root@gnutoo-laptop:~# dmesg | tail -n 1
[22036.864772] wlan0: no IPv6 routers present
Denis.
^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] ath9k stopped queue bug
@ 2011-02-26 18:44 ` Denis 'GNUtoo' Carikli
0 siblings, 0 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-02-26 18:44 UTC (permalink / raw)
To: ath9k-devel
On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
> please try with debug messages enabled sudo modprobe ath9k debug=0x2
> (or)
> sudo modprobe debug=0x82 (this produces lots of log)
I unloaded, reloaded with debug= the ath9k module, then I connected to
the AP and I didn't see any supplementary message:
root at gnutoo-laptop:~# modinfo ath9k
filename: /lib/modules/2.6.37-020637-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
license: Dual BSD/GPL
description: Support for Atheros 802.11n wireless LAN cards.
author: Atheros Communications
srcversion: 9F79F17BF7FC245D5B37879
alias: pci:v0000168Cd00000030sv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i*
alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i*
alias: pci:v0000168Cd00000029sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000027sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000024sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000023sv*sd*bc*sc*i*
depends: ath9k_hw,mac80211,cfg80211,ath9k_common,ath
vermagic: 2.6.37-020637-generic SMP mod_unload modversions
parm: debug:Debugging mask (uint)
parm: nohwcrypt:Disable hardware encryption (int)
parm: blink:Enable LED blink on activity (int)
root at gnutoo-laptop:~# lsmod | grep ath9k
ath9k_common 3151 0
ath9k_hw 288200 1 ath9k_common
ath 17109 1 ath9k_hw
root at gnutoo-laptop:~# modprobe ath9k debug=0x82
[...] #connect to the open AP with network manager
root at gnutoo-laptop:~# dmesg | tail -n 1
[22036.864772] wlan0: no IPv6 routers present
Denis.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-02-22 16:01 ath9k stopped queue bug Denis 'GNUtoo' Carikli
2011-02-23 5:34 ` [ath9k-devel] " Mohammed Shafi
@ 2011-02-28 5:14 ` Senthil Balasubramanian
1 sibling, 0 replies; 18+ messages in thread
From: Senthil Balasubramanian @ 2011-02-28 5:14 UTC (permalink / raw)
To: Denis 'GNUtoo' Carikli; +Cc: linux-wireless
On Tue, Feb 22, 2011 at 09:31:24PM +0530, Denis 'GNUtoo' Carikli wrote:
> Hi,
>
> When I transfer large files at high speed(rsync to my x86 router,
> locally, not trough the Internet) I get:
> ping: sendmsg: No buffer space available
>
> And I can't send anymore data.
>
> /sys/kernel/debug/ieee80211/phy*/queues is
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000000/0
> 03: 0x00000000/0
> In normal conditions.
>
> But when I can't send anymore data I've that:
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000001/0
> 03: 0x00000000/0
> or that:
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000001/333
> 03: 0x00000000/0
As Johannes has pointed out it is an issue with the driver and already addressed
in wireless-testing (commit 92460412367c00e97f99babdb898d0930ce604fc). I have
ported this commit to 2.6.37 kernel for your reference.. and I believe we
should push this patch down to stable kernel also as running with NM can cause
this issue.
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index da5c645..f6a2a19 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -292,6 +292,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
}
ps_restore:
+ ieee80211_wake_queues(hw);
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 07b7804..3751e92 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1205,8 +1205,17 @@ bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
ath_err(common, "Failed to stop TX DMA!\n");
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
- if (ATH_TXQ_SETUP(sc, i))
- ath_draintxq(sc, &sc->tx.txq[i], retry_tx);
+ if (!ATH_TXQ_SETUP(sc, i))
+ continue;
+
+ /*
+ * The caller will resume queues with ieee80211_wake_queues.
+ * Mark the queue as not stopped to prevent ath_tx_complete
+ * from waking the queue too early.
+ */
+ txq = &sc->tx.txq[i];
+ txq->stopped = false;
+ ath_draintxq(sc, txq, retry_tx);
}
return !npend;
@@ -1860,6 +1869,11 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
spin_lock_bh(&txq->axq_lock);
if (WARN_ON(--txq->pending_frames < 0))
txq->pending_frames = 0;
+ if (txq->stopped &&
+ txq->pending_frames < ATH_MAX_QDEPTH) {
+ if (ath_mac80211_start_queue(sc, q))
+ txq->stopped = 0;
+ }
spin_unlock_bh(&txq->axq_lock);
}
@@ -1971,19 +1985,6 @@ static void ath_tx_rc_status(struct ath_buf *bf, struct ath_tx_status *ts,
tx_info->status.rates[tx_rateindex].count = ts->ts_longretry + 1;
}
-static void ath_wake_mac80211_queue(struct ath_softc *sc, int qnum)
-{
- struct ath_txq *txq;
-
- txq = sc->tx.txq_map[qnum];
- spin_lock_bh(&txq->axq_lock);
- if (txq->stopped && txq->pending_frames < ATH_MAX_QDEPTH) {
- if (ath_mac80211_start_queue(sc, qnum))
- txq->stopped = 0;
- }
- spin_unlock_bh(&txq->axq_lock);
-}
-
static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
{
struct ath_hw *ah = sc->sc_ah;
@@ -2081,9 +2082,6 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
else
ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, txok, 0);
- if (txq == sc->tx.txq_map[qnum])
- ath_wake_mac80211_queue(sc, qnum);
-
spin_lock_bh(&txq->axq_lock);
if (sc->sc_flags & SC_OP_TXAGGR)
ath_txq_schedule(sc, txq);
@@ -2205,9 +2203,6 @@ void ath_tx_edma_tasklet(struct ath_softc *sc)
ath_tx_complete_buf(sc, bf, txq, &bf_head,
&txs, txok, 0);
- if (txq == sc->tx.txq_map[qnum])
- ath_wake_mac80211_queue(sc, qnum);
-
spin_lock_bh(&txq->axq_lock);
if (!list_empty(&txq->txq_fifo_pending)) {
INIT_LIST_HEAD(&bf_head);
>
>
> Here's my irc conversation in #linux-wireless on Freeenode about that
> issue:
>
> Feb 22 16:28:38 <GNUtoo|laptop> hi,
> Feb 22 16:29:23 <GNUtoo|laptop> when I rsync to my router at high speed
> over wifi, huge amount of data, I've that:
> Feb 22 16:29:24 <GNUtoo|laptop> ping: sendmsg: No buffer space available
> Feb 22 16:29:27 <GNUtoo|laptop> and wifi breaks
> Feb 22 16:29:30 <GNUtoo|laptop> I've to reconnect
> Feb 22 16:29:40 <GNUtoo|laptop> should I try setting a lower MTU?
> Feb 22 16:29:43 <GNUtoo|laptop> what should I try?
> Feb 22 16:29:53 <GNUtoo|laptop> and why isn't there any more buffer
> space?
> Feb 22 16:31:57 <johill> sounds like a queue management bug
> Feb 22 16:32:06 <johill> with packets stuck somewhere
> Feb 22 16:32:09 <johill> what driver?
> Feb 22 16:34:04 * an-t (~ant@srv1.gnpx.net) has joined #linux-wireless
> Feb 22 16:34:42 <GNUtoo|laptop> ath9k
> Feb 22 16:34:51 <GNUtoo|laptop> on 2.6.37-020637-generic
> Feb 22 16:34:57 <GNUtoo|laptop> I think that's mainline
> Feb 22 16:35:01 <GNUtoo|laptop> let me check
> Feb 22 16:35:02 <johill> hm, dunno
> Feb 22 16:35:09 <johill> there were some queue mgmt things there
> Feb 22 16:35:12 <johill> don't really konw
> Feb 22 16:35:49 <Chainsaw> GNUtoo|laptop: Probably useful to share your
> driver DDoS on linux-wireless; some idea of how many files & what size.
> Feb 22 16:36:10 <GNUtoo|laptop> basically what I do is that:
> Feb 22 16:36:20 <GNUtoo|laptop> I use openembedded to cross-compile
> files
> Feb 22 16:36:25 <GNUtoo|laptop> and sync the result with my router
> Feb 22 16:36:26 * Blues-Man
> (~bluesman@host137-190-dynamic.43-79-r.retail.telecomitalia.it) has
> joined #linux-wireless
> Feb 22 16:36:35 <GNUtoo|laptop> that is an x86 computer with ath9k and
> hostapd
> Feb 22 16:36:52 <GNUtoo|laptop>
> cd /home/gnutoo/embedded/oe/oetmps/eee701/deploy/glibc
> Feb 22 16:36:56 <GNUtoo|laptop> rsync -av -e "ssh -l gnutoo -p 222" *
> router:/var/www/gnutoo.homelinux.org/openembedded/eee701
> Feb 22 16:37:05 <GNUtoo|laptop> is the script I use to sync it
> Feb 22 16:37:37 <johill> I bet when this happens you never get a ping
> pcket through
> Feb 22 16:38:10 <johill> and /sys/kernel/debug/ieee80211/phy*/queues is
> non-zero
> Feb 22 16:38:18 <johill> the info from that file would be useful
> Feb 22 16:38:37 <GNUtoo|laptop> ok I was pastebining the file sizes
> Feb 22 16:38:41 <GNUtoo|laptop> as there are a lot of files....
> Feb 22 16:39:06 <GNUtoo|laptop> ok I'll try to reproduce
> Feb 22 16:39:13 <GNUtoo|laptop> tough that will disconnect me from irc
> Feb 22 16:40:54 <johill> I bet it'll be 0x0001/n
> Feb 22 16:40:56 <johill> n > 0
> Feb 22 16:42:16 <GNUtoo|laptop> ping also increase during the huge
> transfer
> Feb 22 16:42:30 <johill> that's "bufferbloat" but expected now
> Feb 22 16:42:35 <GNUtoo|laptop> ok
> Feb 22 16:42:49 <GNUtoo|laptop> I learned what bufferbloat was not so
> long ago
> Feb 22 16:44:27 * Topic for #linux-wireless is: User-level discussions
> about wireless LANs on Linux | compat-wireless-2.6 only available for
> kernels >= 2.6.27, work is underway to enable older kernels now that we
> don't use multiqueue on mac80211
> Feb 22 16:44:27 * Topic for #linux-wireless set by linville at Wed Jul
> 8 21:06:20 2009
> Feb 22 16:44:30 <GNUtoo|laptop> it starts with
> Feb 22 16:44:32 <GNUtoo|laptop> 02: 0x00000001/0
> Feb 22 16:44:41 <GNUtoo|laptop> and then increase to
> Feb 22 16:44:47 <GNUtoo|laptop> 02: 0x00000001/333
> Feb 22 16:44:50 <GNUtoo|laptop> the reset is 0
> Feb 22 16:45:02 <johill> yeah
> Feb 22 16:45:06 <johill> as expected
> Feb 22 16:45:08 <GNUtoo|laptop> ok
> Feb 22 16:45:12 <GNUtoo|laptop> what's that exactly?
> Feb 22 16:45:19 <johill> the reason why the queue is stopped
> Feb 22 16:45:23 <johill> and the number of packets in the queue
> Feb 22 16:45:24 <GNUtoo|laptop> oh nice
> Feb 22 16:45:32 <johill> 0x000 == not stopped
> Feb 22 16:45:35 <GNUtoo|laptop> ok
> Feb 22 16:45:39 <GNUtoo|laptop> and what's the reason?
> Feb 22 16:45:41 <johill> /0 = no packets
> Feb 22 16:45:54 <johill> BIT(0) == driver asked for queue to be stopped
> Feb 22 16:46:03 <johill> (IEEE80211_QUEUE_STOP_REASON_DRIVER)
> Feb 22 16:46:08 <GNUtoo|laptop> ok
> Feb 22 16:46:11 <johill> (net/mac80211/ieee80211_i.h)
> Feb 22 16:46:15 <johill> so driver's fault
> Feb 22 16:46:28 <GNUtoo|laptop> dmesg shows nothing tough
> Feb 22 16:46:37 <GNUtoo|laptop> only normal stuff
> Feb 22 16:46:38 <johill> yeah not surprising either
> Feb 22 16:46:45 <GNUtoo|laptop> ah debugfs?
> Feb 22 16:46:47 <johill> queue start/stop happens often enough, no
> logging for it
> Feb 22 16:46:50 <GNUtoo|laptop> or something like that should be used
> Feb 22 16:46:50 <GNUtoo|laptop> ok
> Feb 22 16:49:45 <GNUtoo|laptop> what should I do now?
> Feb 22 16:50:10 <johill> report a bug on ath9k
>
> Denis.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-02-23 5:34 ` [ath9k-devel] " Mohammed Shafi
@ 2011-03-20 19:05 ` Denis 'GNUtoo' Carikli
-1 siblings, 0 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-03-20 19:05 UTC (permalink / raw)
To: Mohammed Shafi; +Cc: linux-wireless, ath9k-devel
On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
> please try with debug messages enabled sudo modprobe ath9k debug=0x2
> (or)
> sudo modprobe debug=0x82 (this produces lots of log)
# cat /sys/kernel/debug/ieee80211/phy*/queues
00: 0x00000000/0
01: 0x00000000/0
02: 0x00000001/965
03: 0x00000000/0
# uname -a
Linux gnutoo-laptop 2.6.38-gnutoo-0001 #2 SMP Sat Mar 19 19:07:58 CET
2011 x86_64 GNU/Linux
The problem persist and dmesg still doesn't have the debug infos...
Denis.
^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] ath9k stopped queue bug
@ 2011-03-20 19:05 ` Denis 'GNUtoo' Carikli
0 siblings, 0 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-03-20 19:05 UTC (permalink / raw)
To: ath9k-devel
On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
> please try with debug messages enabled sudo modprobe ath9k debug=0x2
> (or)
> sudo modprobe debug=0x82 (this produces lots of log)
# cat /sys/kernel/debug/ieee80211/phy*/queues
00: 0x00000000/0
01: 0x00000000/0
02: 0x00000001/965
03: 0x00000000/0
# uname -a
Linux gnutoo-laptop 2.6.38-gnutoo-0001 #2 SMP Sat Mar 19 19:07:58 CET
2011 x86_64 GNU/Linux
The problem persist and dmesg still doesn't have the debug infos...
Denis.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-03-20 19:05 ` [ath9k-devel] " Denis 'GNUtoo' Carikli
@ 2011-03-21 15:11 ` Mohammed Shafi
-1 siblings, 0 replies; 18+ messages in thread
From: Mohammed Shafi @ 2011-03-21 15:11 UTC (permalink / raw)
To: Denis 'GNUtoo' Carikli; +Cc: linux-wireless, ath9k-devel
On Mon, Mar 21, 2011 at 12:35 AM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
> On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
>> please try with debug messages enabled sudo modprobe ath9k debug=0x2
>> (or)
>> sudo modprobe debug=0x82 (this produces lots of log)
> # cat /sys/kernel/debug/ieee80211/phy*/queues
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000001/965
> 03: 0x00000000/0
> # uname -a
> Linux gnutoo-laptop 2.6.38-gnutoo-0001 #2 SMP Sat Mar 19 19:07:58 CET
> 2011 x86_64 GNU/Linux
>
> The problem persist and dmesg still doesn't have the debug infos...
regarding the debug info you need to be enable following in config.mk or .config
CONFIG_ATH_DEBUG=y
CONFIG_ATH9K_DEBUGFS=y
>
> Denis.
>
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] ath9k stopped queue bug
@ 2011-03-21 15:11 ` Mohammed Shafi
0 siblings, 0 replies; 18+ messages in thread
From: Mohammed Shafi @ 2011-03-21 15:11 UTC (permalink / raw)
To: ath9k-devel
On Mon, Mar 21, 2011 at 12:35 AM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
> On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
>> please try with debug messages enabled sudo modprobe ath9k debug=0x2
>> (or)
>> sudo modprobe debug=0x82 (this produces lots of log)
> # cat /sys/kernel/debug/ieee80211/phy*/queues
> 00: 0x00000000/0
> 01: 0x00000000/0
> 02: 0x00000001/965
> 03: 0x00000000/0
> # uname -a
> Linux gnutoo-laptop 2.6.38-gnutoo-0001 #2 SMP Sat Mar 19 19:07:58 CET
> 2011 x86_64 GNU/Linux
>
> The problem persist and dmesg still doesn't have the debug infos...
regarding the debug info you need to be enable following in config.mk or .config
CONFIG_ATH_DEBUG=y
CONFIG_ATH9K_DEBUGFS=y
>
> Denis.
>
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-03-21 15:11 ` [ath9k-devel] " Mohammed Shafi
@ 2011-04-25 18:46 ` Denis 'GNUtoo' Carikli
-1 siblings, 0 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-04-25 18:46 UTC (permalink / raw)
To: Mohammed Shafi; +Cc: linux-wireless, ath9k-devel
[-- Attachment #1: Type: text/plain, Size: 4238 bytes --]
On Mon, 2011-03-21 at 20:41 +0530, Mohammed Shafi wrote:
> On Mon, Mar 21, 2011 at 12:35 AM, Denis 'GNUtoo' Carikli
> <GNUtoo@no-log.org> wrote:
> > On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
> >> please try with debug messages enabled sudo modprobe ath9k debug=0x2
> >> (or)
> >> sudo modprobe debug=0x82 (this produces lots of log)
> > # cat /sys/kernel/debug/ieee80211/phy*/queues
> > 00: 0x00000000/0
> > 01: 0x00000000/0
> > 02: 0x00000001/965
> > 03: 0x00000000/0
> > # uname -a
> > Linux gnutoo-laptop 2.6.38-gnutoo-0001 #2 SMP Sat Mar 19 19:07:58 CET
> > 2011 x86_64 GNU/Linux
> >
> > The problem persist and dmesg still doesn't have the debug infos...
>
>
> regarding the debug info you need to be enable following in config.mk or .config
> CONFIG_ATH_DEBUG=y
> CONFIG_ATH9K_DEBUGFS=y
Here's 0x2:
[...]
[ 8022.507095] ath: qnum: 0, txq depth: 0
[ 8022.507101] ath: Enable TXE on queue: 0
[ 8022.507142] ath: tx queue 0 (37838880), link ffff880037838880
[ 8022.507295] ath: tx queue 0 (37838880), link ffff880037838880
[ 8022.601383] ath: qnum: 0, txq depth: 0
[ 8022.601390] ath: Enable TXE on queue: 0
[ 8022.601444] ath: tx queue 0 (378388e8), link ffff8800378388e8
[ 8022.601564] ath: tx queue 0 (378388e8), link ffff8800378388e8
[ 8022.845845] scsi host1: rpm_resume flags 0x4
[ 8022.845851] scsi host1: rpm_resume returns 1
[ 8023.844839] scsi host1: rpm_resume flags 0x4
[ 8023.844845] scsi host1: rpm_resume returns 1
[ 8023.846386] scsi host1: rpm_resume flags 0x4
[ 8023.846393] scsi host1: rpm_resume returns 1
[ 8024.246146] ath: qnum: 0, txq depth: 0
[ 8024.246153] ath: Enable TXE on queue: 0
[ 8024.246194] ath: tx queue 0 (37838950), link ffff880037838950
[ 8024.246272] ath: tx queue 0 (37838950), link ffff880037838950
[ 8024.339867] ath: qnum: 0, txq depth: 0
[ 8024.339874] ath: Enable TXE on queue: 0
[ 8024.339917] ath: tx queue 0 (378389b8), link ffff8800378389b8
[ 8024.339990] ath: tx queue 0 (378389b8), link ffff8800378389b8
[ 8024.844097] scsi host1: rpm_resume flags 0x4
[ 8024.844104] scsi host1: rpm_resume returns 1
[ 8025.842473] scsi host1: rpm_resume flags 0x4
[ 8025.842480] scsi host1: rpm_resume returns 1
[ 8025.843829] scsi host1: rpm_resume flags 0x4
[ 8025.843833] scsi host1: rpm_resume returns 1
[ 8026.292195] ath: qnum: 0, txq depth: 0
[ 8026.292202] ath: Enable TXE on queue: 0
[ 8026.292242] ath: tx queue 0 (37838a20), link ffff880037838a20
[ 8026.292323] ath: tx queue 0 (37838a20), link ffff880037838a20
[ 8026.387914] ath: qnum: 0, txq depth: 0
[ 8026.387923] ath: Enable TXE on queue: 0
[ 8026.388040] ath: tx queue 0 (37838a88), link ffff880037838a88
[ 8026.841295] scsi host1: rpm_resume flags 0x4
[ 8026.841301] scsi host1: rpm_resume returns 1
[ 8027.315285] ath: qnum: 0, txq depth: 0
[ 8027.315292] ath: Enable TXE on queue: 0
[ 8027.315337] ath: tx queue 0 (37838af0), link ffff880037838af0
[ 8027.315410] ath: tx queue 0 (37838af0), link ffff880037838af0
[ 8027.406817] ath: qnum: 0, txq depth: 0
[ 8027.406824] ath: Enable TXE on queue: 0
[ 8027.406875] ath: tx queue 0 (37838b58), link ffff880037838b58
[ 8027.406991] ath: tx queue 0 (37838b58), link ffff880037838b58
[ 8027.841126] scsi host1: rpm_resume flags 0x4
[ 8027.841133] scsi host1: rpm_resume returns 1
[ 8027.842780] scsi host1: rpm_resume flags 0x4
[ 8027.842787] scsi host1: rpm_resume returns 1
[ 8028.338233] ath: qnum: 0, txq depth: 0
[ 8028.338240] ath: Enable TXE on queue: 0
[ 8028.338280] ath: tx queue 0 (37838bc0), link ffff880037838bc0
[ 8028.338358] ath: tx queue 0 (37838bc0), link ffff880037838bc0
[ 8028.435895] ath: qnum: 0, txq depth: 0
[ 8028.435901] ath: Enable TXE on queue: 0
[ 8028.435947] ath: tx queue 0 (37838c28), link ffff880037838c28
[ 8028.436019] ath: tx queue 0 (37838c28), link ffff880037838c28
[ 8028.840280] scsi host1: rpm_resume flags 0x4
[ 8028.840287] scsi host1: rpm_resume returns 1
[ 8029.839181] scsi host1: rpm_resume flags 0x4
[ 8029.839191] scsi host1: rpm_resume returns 1
[ 8029.840671] scsi host1: rpm_resume flags 0x4
[ 8029.840677] scsi host1: rpm_resume returns 1
[ 8030.838370] scsi host1: rpm_resume flags 0x4
[...] (nothing but power management debug stuff)
I also attached a more complete bziped log.
Sorry for the delay.
Denis.
[-- Attachment #2: ath9k_trace.txt.bz2 --]
[-- Type: application/x-bzip, Size: 5826 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] ath9k stopped queue bug
@ 2011-04-25 18:46 ` Denis 'GNUtoo' Carikli
0 siblings, 0 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-04-25 18:46 UTC (permalink / raw)
To: ath9k-devel
On Mon, 2011-03-21 at 20:41 +0530, Mohammed Shafi wrote:
> On Mon, Mar 21, 2011 at 12:35 AM, Denis 'GNUtoo' Carikli
> <GNUtoo@no-log.org> wrote:
> > On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
> >> please try with debug messages enabled sudo modprobe ath9k debug=0x2
> >> (or)
> >> sudo modprobe debug=0x82 (this produces lots of log)
> > # cat /sys/kernel/debug/ieee80211/phy*/queues
> > 00: 0x00000000/0
> > 01: 0x00000000/0
> > 02: 0x00000001/965
> > 03: 0x00000000/0
> > # uname -a
> > Linux gnutoo-laptop 2.6.38-gnutoo-0001 #2 SMP Sat Mar 19 19:07:58 CET
> > 2011 x86_64 GNU/Linux
> >
> > The problem persist and dmesg still doesn't have the debug infos...
>
>
> regarding the debug info you need to be enable following in config.mk or .config
> CONFIG_ATH_DEBUG=y
> CONFIG_ATH9K_DEBUGFS=y
Here's 0x2:
[...]
[ 8022.507095] ath: qnum: 0, txq depth: 0
[ 8022.507101] ath: Enable TXE on queue: 0
[ 8022.507142] ath: tx queue 0 (37838880), link ffff880037838880
[ 8022.507295] ath: tx queue 0 (37838880), link ffff880037838880
[ 8022.601383] ath: qnum: 0, txq depth: 0
[ 8022.601390] ath: Enable TXE on queue: 0
[ 8022.601444] ath: tx queue 0 (378388e8), link ffff8800378388e8
[ 8022.601564] ath: tx queue 0 (378388e8), link ffff8800378388e8
[ 8022.845845] scsi host1: rpm_resume flags 0x4
[ 8022.845851] scsi host1: rpm_resume returns 1
[ 8023.844839] scsi host1: rpm_resume flags 0x4
[ 8023.844845] scsi host1: rpm_resume returns 1
[ 8023.846386] scsi host1: rpm_resume flags 0x4
[ 8023.846393] scsi host1: rpm_resume returns 1
[ 8024.246146] ath: qnum: 0, txq depth: 0
[ 8024.246153] ath: Enable TXE on queue: 0
[ 8024.246194] ath: tx queue 0 (37838950), link ffff880037838950
[ 8024.246272] ath: tx queue 0 (37838950), link ffff880037838950
[ 8024.339867] ath: qnum: 0, txq depth: 0
[ 8024.339874] ath: Enable TXE on queue: 0
[ 8024.339917] ath: tx queue 0 (378389b8), link ffff8800378389b8
[ 8024.339990] ath: tx queue 0 (378389b8), link ffff8800378389b8
[ 8024.844097] scsi host1: rpm_resume flags 0x4
[ 8024.844104] scsi host1: rpm_resume returns 1
[ 8025.842473] scsi host1: rpm_resume flags 0x4
[ 8025.842480] scsi host1: rpm_resume returns 1
[ 8025.843829] scsi host1: rpm_resume flags 0x4
[ 8025.843833] scsi host1: rpm_resume returns 1
[ 8026.292195] ath: qnum: 0, txq depth: 0
[ 8026.292202] ath: Enable TXE on queue: 0
[ 8026.292242] ath: tx queue 0 (37838a20), link ffff880037838a20
[ 8026.292323] ath: tx queue 0 (37838a20), link ffff880037838a20
[ 8026.387914] ath: qnum: 0, txq depth: 0
[ 8026.387923] ath: Enable TXE on queue: 0
[ 8026.388040] ath: tx queue 0 (37838a88), link ffff880037838a88
[ 8026.841295] scsi host1: rpm_resume flags 0x4
[ 8026.841301] scsi host1: rpm_resume returns 1
[ 8027.315285] ath: qnum: 0, txq depth: 0
[ 8027.315292] ath: Enable TXE on queue: 0
[ 8027.315337] ath: tx queue 0 (37838af0), link ffff880037838af0
[ 8027.315410] ath: tx queue 0 (37838af0), link ffff880037838af0
[ 8027.406817] ath: qnum: 0, txq depth: 0
[ 8027.406824] ath: Enable TXE on queue: 0
[ 8027.406875] ath: tx queue 0 (37838b58), link ffff880037838b58
[ 8027.406991] ath: tx queue 0 (37838b58), link ffff880037838b58
[ 8027.841126] scsi host1: rpm_resume flags 0x4
[ 8027.841133] scsi host1: rpm_resume returns 1
[ 8027.842780] scsi host1: rpm_resume flags 0x4
[ 8027.842787] scsi host1: rpm_resume returns 1
[ 8028.338233] ath: qnum: 0, txq depth: 0
[ 8028.338240] ath: Enable TXE on queue: 0
[ 8028.338280] ath: tx queue 0 (37838bc0), link ffff880037838bc0
[ 8028.338358] ath: tx queue 0 (37838bc0), link ffff880037838bc0
[ 8028.435895] ath: qnum: 0, txq depth: 0
[ 8028.435901] ath: Enable TXE on queue: 0
[ 8028.435947] ath: tx queue 0 (37838c28), link ffff880037838c28
[ 8028.436019] ath: tx queue 0 (37838c28), link ffff880037838c28
[ 8028.840280] scsi host1: rpm_resume flags 0x4
[ 8028.840287] scsi host1: rpm_resume returns 1
[ 8029.839181] scsi host1: rpm_resume flags 0x4
[ 8029.839191] scsi host1: rpm_resume returns 1
[ 8029.840671] scsi host1: rpm_resume flags 0x4
[ 8029.840677] scsi host1: rpm_resume returns 1
[ 8030.838370] scsi host1: rpm_resume flags 0x4
[...] (nothing but power management debug stuff)
I also attached a more complete bziped log.
Sorry for the delay.
Denis.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ath9k_trace.txt.bz2
Type: application/x-bzip
Size: 5826 bytes
Desc: not available
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20110425/f876d83a/attachment-0001.bin
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-04-25 18:46 ` [ath9k-devel] " Denis 'GNUtoo' Carikli
@ 2011-04-28 4:53 ` Mohammed Shafi
-1 siblings, 0 replies; 18+ messages in thread
From: Mohammed Shafi @ 2011-04-28 4:53 UTC (permalink / raw)
To: Denis 'GNUtoo' Carikli; +Cc: linux-wireless, ath9k-devel
On Tue, Apr 26, 2011 at 12:16 AM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
> On Mon, 2011-03-21 at 20:41 +0530, Mohammed Shafi wrote:
>> On Mon, Mar 21, 2011 at 12:35 AM, Denis 'GNUtoo' Carikli
>> <GNUtoo@no-log.org> wrote:
>> > On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
>> >> please try with debug messages enabled sudo modprobe ath9k debug=0x2
>> >> (or)
>> >> sudo modprobe debug=0x82 (this produces lots of log)
>> > # cat /sys/kernel/debug/ieee80211/phy*/queues
>> > 00: 0x00000000/0
>> > 01: 0x00000000/0
>> > 02: 0x00000001/965
>> > 03: 0x00000000/0
>> > # uname -a
>> > Linux gnutoo-laptop 2.6.38-gnutoo-0001 #2 SMP Sat Mar 19 19:07:58 CET
>> > 2011 x86_64 GNU/Linux
>> >
>> > The problem persist and dmesg still doesn't have the debug infos...
>>
>>
>> regarding the debug info you need to be enable following in config.mk or .config
>> CONFIG_ATH_DEBUG=y
>> CONFIG_ATH9K_DEBUGFS=y
> Here's 0x2:
> [...]
> [ 8022.507095] ath: qnum: 0, txq depth: 0
> [ 8022.507101] ath: Enable TXE on queue: 0
> [ 8022.507142] ath: tx queue 0 (37838880), link ffff880037838880
> [ 8022.507295] ath: tx queue 0 (37838880), link ffff880037838880
> [ 8022.601383] ath: qnum: 0, txq depth: 0
> [ 8022.601390] ath: Enable TXE on queue: 0
> [ 8022.601444] ath: tx queue 0 (378388e8), link ffff8800378388e8
> [ 8022.601564] ath: tx queue 0 (378388e8), link ffff8800378388e8
> [ 8022.845845] scsi host1: rpm_resume flags 0x4
> [ 8022.845851] scsi host1: rpm_resume returns 1
> [ 8023.844839] scsi host1: rpm_resume flags 0x4
> [ 8023.844845] scsi host1: rpm_resume returns 1
> [ 8023.846386] scsi host1: rpm_resume flags 0x4
> [ 8023.846393] scsi host1: rpm_resume returns 1
> [ 8024.246146] ath: qnum: 0, txq depth: 0
> [ 8024.246153] ath: Enable TXE on queue: 0
> [ 8024.246194] ath: tx queue 0 (37838950), link ffff880037838950
> [ 8024.246272] ath: tx queue 0 (37838950), link ffff880037838950
> [ 8024.339867] ath: qnum: 0, txq depth: 0
> [ 8024.339874] ath: Enable TXE on queue: 0
> [ 8024.339917] ath: tx queue 0 (378389b8), link ffff8800378389b8
> [ 8024.339990] ath: tx queue 0 (378389b8), link ffff8800378389b8
> [ 8024.844097] scsi host1: rpm_resume flags 0x4
> [ 8024.844104] scsi host1: rpm_resume returns 1
> [ 8025.842473] scsi host1: rpm_resume flags 0x4
> [ 8025.842480] scsi host1: rpm_resume returns 1
> [ 8025.843829] scsi host1: rpm_resume flags 0x4
> [ 8025.843833] scsi host1: rpm_resume returns 1
> [ 8026.292195] ath: qnum: 0, txq depth: 0
> [ 8026.292202] ath: Enable TXE on queue: 0
> [ 8026.292242] ath: tx queue 0 (37838a20), link ffff880037838a20
> [ 8026.292323] ath: tx queue 0 (37838a20), link ffff880037838a20
> [ 8026.387914] ath: qnum: 0, txq depth: 0
> [ 8026.387923] ath: Enable TXE on queue: 0
> [ 8026.388040] ath: tx queue 0 (37838a88), link ffff880037838a88
> [ 8026.841295] scsi host1: rpm_resume flags 0x4
> [ 8026.841301] scsi host1: rpm_resume returns 1
> [ 8027.315285] ath: qnum: 0, txq depth: 0
> [ 8027.315292] ath: Enable TXE on queue: 0
> [ 8027.315337] ath: tx queue 0 (37838af0), link ffff880037838af0
> [ 8027.315410] ath: tx queue 0 (37838af0), link ffff880037838af0
> [ 8027.406817] ath: qnum: 0, txq depth: 0
> [ 8027.406824] ath: Enable TXE on queue: 0
> [ 8027.406875] ath: tx queue 0 (37838b58), link ffff880037838b58
> [ 8027.406991] ath: tx queue 0 (37838b58), link ffff880037838b58
> [ 8027.841126] scsi host1: rpm_resume flags 0x4
> [ 8027.841133] scsi host1: rpm_resume returns 1
> [ 8027.842780] scsi host1: rpm_resume flags 0x4
> [ 8027.842787] scsi host1: rpm_resume returns 1
> [ 8028.338233] ath: qnum: 0, txq depth: 0
> [ 8028.338240] ath: Enable TXE on queue: 0
> [ 8028.338280] ath: tx queue 0 (37838bc0), link ffff880037838bc0
> [ 8028.338358] ath: tx queue 0 (37838bc0), link ffff880037838bc0
> [ 8028.435895] ath: qnum: 0, txq depth: 0
> [ 8028.435901] ath: Enable TXE on queue: 0
> [ 8028.435947] ath: tx queue 0 (37838c28), link ffff880037838c28
> [ 8028.436019] ath: tx queue 0 (37838c28), link ffff880037838c28
> [ 8028.840280] scsi host1: rpm_resume flags 0x4
> [ 8028.840287] scsi host1: rpm_resume returns 1
> [ 8029.839181] scsi host1: rpm_resume flags 0x4
> [ 8029.839191] scsi host1: rpm_resume returns 1
> [ 8029.840671] scsi host1: rpm_resume flags 0x4
> [ 8029.840677] scsi host1: rpm_resume returns 1
> [ 8030.838370] scsi host1: rpm_resume flags 0x4
> [...] (nothing but power management debug stuff)
>
> I also attached a more complete bziped log.
>
> Sorry for the delay.
Hi Denis,
please try with the backported fix Senthil had provided
for your kernel. from the debug messages I could see that the
txq-depth has reached the 'maximum' of 123 for some reason and this
might stop the queue.
Also you mentioned about power management debug stuff, if the tx is
going we should hardly get it(unless the traffic stalls). if you want
all the latest fixes you can try with latest wireless-testing or
compat-wireless
http://linuxwireless.org/en/developers/Documentation/git-guide
http://wireless.kernel.org/en/users/Download
>
> Denis.
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] ath9k stopped queue bug
@ 2011-04-28 4:53 ` Mohammed Shafi
0 siblings, 0 replies; 18+ messages in thread
From: Mohammed Shafi @ 2011-04-28 4:53 UTC (permalink / raw)
To: ath9k-devel
On Tue, Apr 26, 2011 at 12:16 AM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
> On Mon, 2011-03-21 at 20:41 +0530, Mohammed Shafi wrote:
>> On Mon, Mar 21, 2011 at 12:35 AM, Denis 'GNUtoo' Carikli
>> <GNUtoo@no-log.org> wrote:
>> > On Wed, 2011-02-23 at 11:04 +0530, Mohammed Shafi wrote:
>> >> please try with debug messages enabled sudo modprobe ath9k debug=0x2
>> >> (or)
>> >> sudo modprobe debug=0x82 (this produces lots of log)
>> > # cat /sys/kernel/debug/ieee80211/phy*/queues
>> > 00: 0x00000000/0
>> > 01: 0x00000000/0
>> > 02: 0x00000001/965
>> > 03: 0x00000000/0
>> > # uname -a
>> > Linux gnutoo-laptop 2.6.38-gnutoo-0001 #2 SMP Sat Mar 19 19:07:58 CET
>> > 2011 x86_64 GNU/Linux
>> >
>> > The problem persist and dmesg still doesn't have the debug infos...
>>
>>
>> regarding the debug info you need to be enable following in config.mk or .config
>> CONFIG_ATH_DEBUG=y
>> CONFIG_ATH9K_DEBUGFS=y
> Here's 0x2:
> [...]
> [ 8022.507095] ath: qnum: 0, txq depth: 0
> [ 8022.507101] ath: Enable TXE on queue: 0
> [ 8022.507142] ath: tx queue 0 (37838880), link ffff880037838880
> [ 8022.507295] ath: tx queue 0 (37838880), link ffff880037838880
> [ 8022.601383] ath: qnum: 0, txq depth: 0
> [ 8022.601390] ath: Enable TXE on queue: 0
> [ 8022.601444] ath: tx queue 0 (378388e8), link ffff8800378388e8
> [ 8022.601564] ath: tx queue 0 (378388e8), link ffff8800378388e8
> [ 8022.845845] scsi host1: rpm_resume flags 0x4
> [ 8022.845851] scsi host1: rpm_resume returns 1
> [ 8023.844839] scsi host1: rpm_resume flags 0x4
> [ 8023.844845] scsi host1: rpm_resume returns 1
> [ 8023.846386] scsi host1: rpm_resume flags 0x4
> [ 8023.846393] scsi host1: rpm_resume returns 1
> [ 8024.246146] ath: qnum: 0, txq depth: 0
> [ 8024.246153] ath: Enable TXE on queue: 0
> [ 8024.246194] ath: tx queue 0 (37838950), link ffff880037838950
> [ 8024.246272] ath: tx queue 0 (37838950), link ffff880037838950
> [ 8024.339867] ath: qnum: 0, txq depth: 0
> [ 8024.339874] ath: Enable TXE on queue: 0
> [ 8024.339917] ath: tx queue 0 (378389b8), link ffff8800378389b8
> [ 8024.339990] ath: tx queue 0 (378389b8), link ffff8800378389b8
> [ 8024.844097] scsi host1: rpm_resume flags 0x4
> [ 8024.844104] scsi host1: rpm_resume returns 1
> [ 8025.842473] scsi host1: rpm_resume flags 0x4
> [ 8025.842480] scsi host1: rpm_resume returns 1
> [ 8025.843829] scsi host1: rpm_resume flags 0x4
> [ 8025.843833] scsi host1: rpm_resume returns 1
> [ 8026.292195] ath: qnum: 0, txq depth: 0
> [ 8026.292202] ath: Enable TXE on queue: 0
> [ 8026.292242] ath: tx queue 0 (37838a20), link ffff880037838a20
> [ 8026.292323] ath: tx queue 0 (37838a20), link ffff880037838a20
> [ 8026.387914] ath: qnum: 0, txq depth: 0
> [ 8026.387923] ath: Enable TXE on queue: 0
> [ 8026.388040] ath: tx queue 0 (37838a88), link ffff880037838a88
> [ 8026.841295] scsi host1: rpm_resume flags 0x4
> [ 8026.841301] scsi host1: rpm_resume returns 1
> [ 8027.315285] ath: qnum: 0, txq depth: 0
> [ 8027.315292] ath: Enable TXE on queue: 0
> [ 8027.315337] ath: tx queue 0 (37838af0), link ffff880037838af0
> [ 8027.315410] ath: tx queue 0 (37838af0), link ffff880037838af0
> [ 8027.406817] ath: qnum: 0, txq depth: 0
> [ 8027.406824] ath: Enable TXE on queue: 0
> [ 8027.406875] ath: tx queue 0 (37838b58), link ffff880037838b58
> [ 8027.406991] ath: tx queue 0 (37838b58), link ffff880037838b58
> [ 8027.841126] scsi host1: rpm_resume flags 0x4
> [ 8027.841133] scsi host1: rpm_resume returns 1
> [ 8027.842780] scsi host1: rpm_resume flags 0x4
> [ 8027.842787] scsi host1: rpm_resume returns 1
> [ 8028.338233] ath: qnum: 0, txq depth: 0
> [ 8028.338240] ath: Enable TXE on queue: 0
> [ 8028.338280] ath: tx queue 0 (37838bc0), link ffff880037838bc0
> [ 8028.338358] ath: tx queue 0 (37838bc0), link ffff880037838bc0
> [ 8028.435895] ath: qnum: 0, txq depth: 0
> [ 8028.435901] ath: Enable TXE on queue: 0
> [ 8028.435947] ath: tx queue 0 (37838c28), link ffff880037838c28
> [ 8028.436019] ath: tx queue 0 (37838c28), link ffff880037838c28
> [ 8028.840280] scsi host1: rpm_resume flags 0x4
> [ 8028.840287] scsi host1: rpm_resume returns 1
> [ 8029.839181] scsi host1: rpm_resume flags 0x4
> [ 8029.839191] scsi host1: rpm_resume returns 1
> [ 8029.840671] scsi host1: rpm_resume flags 0x4
> [ 8029.840677] scsi host1: rpm_resume returns 1
> [ 8030.838370] scsi host1: rpm_resume flags 0x4
> [...] (nothing but power management debug stuff)
>
> I also attached a more complete bziped log.
>
> Sorry for the delay.
Hi Denis,
please try with the backported fix Senthil had provided
for your kernel. from the debug messages I could see that the
txq-depth has reached the 'maximum' of 123 for some reason and this
might stop the queue.
Also you mentioned about power management debug stuff, if the tx is
going we should hardly get it(unless the traffic stalls). if you want
all the latest fixes you can try with latest wireless-testing or
compat-wireless
http://linuxwireless.org/en/developers/Documentation/git-guide
http://wireless.kernel.org/en/users/Download
>
> Denis.
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-04-28 4:53 ` [ath9k-devel] " Mohammed Shafi
@ 2011-05-03 20:06 ` Denis 'GNUtoo' Carikli
-1 siblings, 0 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-05-03 20:06 UTC (permalink / raw)
To: Mohammed Shafi; +Cc: linux-wireless, ath9k-devel
> if you want
> all the latest fixes you can try with latest wireless-testing or
> compat-wireless
Thanks a lot, it works fine now(with compat-wireless).
Denis.
^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] ath9k stopped queue bug
@ 2011-05-03 20:06 ` Denis 'GNUtoo' Carikli
0 siblings, 0 replies; 18+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-05-03 20:06 UTC (permalink / raw)
To: ath9k-devel
> if you want
> all the latest fixes you can try with latest wireless-testing or
> compat-wireless
Thanks a lot, it works fine now(with compat-wireless).
Denis.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: ath9k stopped queue bug
2011-05-03 20:06 ` [ath9k-devel] " Denis 'GNUtoo' Carikli
@ 2011-05-04 4:20 ` Mohammed Shafi
-1 siblings, 0 replies; 18+ messages in thread
From: Mohammed Shafi @ 2011-05-04 4:20 UTC (permalink / raw)
To: Denis 'GNUtoo' Carikli; +Cc: linux-wireless, ath9k-devel
On Wed, May 4, 2011 at 1:36 AM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
>> if you want
>> all the latest fixes you can try with latest wireless-testing or
>> compat-wireless
> Thanks a lot, it works fine now(with compat-wireless).
Oh great!
>
> Denis.
>
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [ath9k-devel] ath9k stopped queue bug
@ 2011-05-04 4:20 ` Mohammed Shafi
0 siblings, 0 replies; 18+ messages in thread
From: Mohammed Shafi @ 2011-05-04 4:20 UTC (permalink / raw)
To: ath9k-devel
On Wed, May 4, 2011 at 1:36 AM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
>> if you want
>> all the latest fixes you can try with latest wireless-testing ?or
>> compat-wireless
> Thanks a lot, it works fine now(with compat-wireless).
Oh great!
>
> Denis.
>
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2011-05-04 4:20 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-22 16:01 ath9k stopped queue bug Denis 'GNUtoo' Carikli
2011-02-23 5:34 ` Mohammed Shafi
2011-02-23 5:34 ` [ath9k-devel] " Mohammed Shafi
2011-02-26 18:44 ` Denis 'GNUtoo' Carikli
2011-02-26 18:44 ` [ath9k-devel] " Denis 'GNUtoo' Carikli
2011-03-20 19:05 ` Denis 'GNUtoo' Carikli
2011-03-20 19:05 ` [ath9k-devel] " Denis 'GNUtoo' Carikli
2011-03-21 15:11 ` Mohammed Shafi
2011-03-21 15:11 ` [ath9k-devel] " Mohammed Shafi
2011-04-25 18:46 ` Denis 'GNUtoo' Carikli
2011-04-25 18:46 ` [ath9k-devel] " Denis 'GNUtoo' Carikli
2011-04-28 4:53 ` Mohammed Shafi
2011-04-28 4:53 ` [ath9k-devel] " Mohammed Shafi
2011-05-03 20:06 ` Denis 'GNUtoo' Carikli
2011-05-03 20:06 ` [ath9k-devel] " Denis 'GNUtoo' Carikli
2011-05-04 4:20 ` Mohammed Shafi
2011-05-04 4:20 ` [ath9k-devel] " Mohammed Shafi
2011-02-28 5:14 ` Senthil Balasubramanian
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.