* [PATCH 1/3] b43: N-PHY: rev3+: correct switching analog core
@ 2011-03-01 20:40 ` Rafał Miłecki
0 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2011-03-01 20:40 UTC (permalink / raw)
To: linux-wireless, John W. Linville; +Cc: b43-dev, Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index ab81ed8..b8e2b2a 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -3878,10 +3878,14 @@ static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
}
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Anacore */
static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on)
{
- b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
- on ? 0 : 0x7FFF);
+ u16 val = on ? 0 : 0x7FFF;
+
+ if (dev->phy.rev >= 3)
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, val);
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER, val);
}
static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
--
1.7.3.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 1/3] b43: N-PHY: rev3+: correct switching analog core
@ 2011-03-01 20:40 ` Rafał Miłecki
0 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2011-03-01 20:40 UTC (permalink / raw)
To: linux-wireless, John W. Linville; +Cc: b43-dev, Rafał Miłecki
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index ab81ed8..b8e2b2a 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -3878,10 +3878,14 @@ static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
}
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Anacore */
static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on)
{
- b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
- on ? 0 : 0x7FFF);
+ u16 val = on ? 0 : 0x7FFF;
+
+ if (dev->phy.rev >= 3)
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, val);
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER, val);
}
static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
--
1.7.3.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/3] b43: N-PHY: rev3+: add tables with gain ctl workarounds
2011-03-01 20:40 ` Rafał Miłecki
@ 2011-03-01 20:40 ` Rafał Miłecki
-1 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2011-03-01 20:40 UTC (permalink / raw)
To: linux-wireless, John W. Linville; +Cc: b43-dev, Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/tables_nphy.c | 103 ++++++++++++++++++++++++++++++++
drivers/net/wireless/b43/tables_nphy.h | 25 ++++++++
2 files changed, 128 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index c42b2ac..2de483b 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2709,6 +2709,79 @@ const struct nphy_rf_control_override_rev3 tbl_rf_control_override_rev3[] = {
{ 0x00C0, 6, 0xE7, 0xF9, 0xEC, 0xFB } /* field == 0x4000 (fls 15) */
};
+struct nphy_gain_ctl_workaround_entry nphy_gain_ctl_workaround[2][3] = {
+ { /* 2GHz */
+ { /* PHY rev 3 */
+ { 7, 11, 16, 23 },
+ { -5, 6, 10, 14 },
+ { 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA },
+ { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+ 0x627E,
+ { 0x613F, 0x613F, 0x613F, 0x613F },
+ 0x107E, 0x0066, 0x0074,
+ 0x18, 0x18, 0x18,
+ 0x020D, 0x5,
+ },
+ { /* PHY rev 4 */
+ { 8, 12, 17, 25 },
+ { -5, 6, 10, 14 },
+ { 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA },
+ { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+ 0x527E,
+ { 0x513F, 0x513F, 0x513F, 0x513F },
+ 0x007E, 0x0066, 0x0074,
+ 0x18, 0x18, 0x18,
+ 0x01A1, 0x5,
+ },
+ { /* PHY rev 5+ */
+ { 9, 13, 18, 26 },
+ { -3, 7, 11, 16 },
+ { 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA },
+ { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+ 0x427E, /* invalid for external LNA! */
+ { 0x413F, 0x413F, 0x413F, 0x413F }, /* invalid for external LNA! */
+ 0x1076, 0x0066, 0x106A,
+ 0xC, 0xC, 0xC,
+ 0x01D0, 0x5,
+ },
+ },
+ { /* 5GHz */
+ { /* PHY rev 3 */
+ { 7, 11, 17, 23 },
+ { -6, 2, 6, 10 },
+ { 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13 },
+ { 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 },
+ 0x52DE,
+ { 0x516F, 0x516F, 0x516F, 0x516F },
+ 0x00DE, 0x00CA, 0x00CC,
+ 0x1E, 0x1E, 0x1E,
+ 0x01A1, 25,
+ },
+ { /* PHY rev 4 */
+ { 8, 12, 18, 23 },
+ { -5, 2, 6, 10 },
+ { 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD },
+ { 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 },
+ 0x629E,
+ { 0x614F, 0x614F, 0x614F, 0x614F },
+ 0x029E, 0x1084, 0x0086,
+ 0x24, 0x24, 0x24,
+ 0x0107, 25,
+ },
+ { /* PHY rev 5+ */
+ { 6, 10, 16, 21 },
+ { -7, 0, 4, 8 },
+ { 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD },
+ { 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 },
+ 0x729E,
+ { 0x714F, 0x714F, 0x714F, 0x714F },
+ 0x029E, 0x2084, 0x2086,
+ 0x24, 0x24, 0x24,
+ 0x00A9, 25,
+ },
+ },
+};
+
static inline void assert_ntab_array_sizes(void)
{
#undef check
@@ -2957,3 +3030,33 @@ void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev)
/* Volatile tables */
/* TODO */
}
+
+struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
+ struct b43_wldev *dev, bool ghz5, bool ext_lna)
+{
+ struct nphy_gain_ctl_workaround_entry *e;
+ u8 phy_idx;
+
+ B43_WARN_ON(dev->phy.rev < 3);
+ if (dev->phy.rev >= 5)
+ phy_idx = 2;
+ else if (dev->phy.rev == 4)
+ phy_idx = 1;
+ else
+ phy_idx = 0;
+
+ e = &nphy_gain_ctl_workaround[ghz5][phy_idx];
+
+ /* Only one entry differs for external LNA, so instead making whole
+ * table 2 times bigger, hack is here
+ */
+ if (!ghz5 && dev->phy.rev >= 5 && ext_lna) {
+ e->rfseq_init[0] &= 0x0FFF;
+ e->rfseq_init[1] &= 0x0FFF;
+ e->rfseq_init[2] &= 0x0FFF;
+ e->rfseq_init[3] &= 0x0FFF;
+ e->init_gain &= 0x0FFF;
+ }
+
+ return e;
+}
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 016a480..1856936 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -35,6 +35,31 @@ struct nphy_rf_control_override_rev3 {
u8 val_addr1;
};
+struct nphy_gain_ctl_workaround_entry {
+ s8 lna1_gain[4];
+ s8 lna2_gain[4];
+ u8 gain_db[10];
+ u8 gain_bits[10];
+
+ u16 init_gain;
+ u16 rfseq_init[4];
+
+ u16 cliphi_gain;
+ u16 clipmd_gain;
+ u16 cliplo_gain;
+
+ u16 crsmin;
+ u16 crsminl;
+ u16 crsminu;
+
+ u16 nbclip;
+ u16 wlclip;
+};
+
+/* Get entry with workaround values for gain ctl. Does not return NULL. */
+struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
+ struct b43_wldev *dev, bool ghz5, bool ext_lna);
+
/* Get the NPHY Channel Switch Table entry for a channel.
* Returns NULL on failure to find an entry. */
const struct b43_nphy_channeltab_entry_rev2 *
--
1.7.3.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/3] b43: N-PHY: rev3+: add tables with gain ctl workarounds
@ 2011-03-01 20:40 ` Rafał Miłecki
0 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2011-03-01 20:40 UTC (permalink / raw)
To: linux-wireless, John W. Linville; +Cc: b43-dev, Rafał Miłecki
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/tables_nphy.c | 103 ++++++++++++++++++++++++++++++++
drivers/net/wireless/b43/tables_nphy.h | 25 ++++++++
2 files changed, 128 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index c42b2ac..2de483b 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2709,6 +2709,79 @@ const struct nphy_rf_control_override_rev3 tbl_rf_control_override_rev3[] = {
{ 0x00C0, 6, 0xE7, 0xF9, 0xEC, 0xFB } /* field == 0x4000 (fls 15) */
};
+struct nphy_gain_ctl_workaround_entry nphy_gain_ctl_workaround[2][3] = {
+ { /* 2GHz */
+ { /* PHY rev 3 */
+ { 7, 11, 16, 23 },
+ { -5, 6, 10, 14 },
+ { 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA },
+ { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+ 0x627E,
+ { 0x613F, 0x613F, 0x613F, 0x613F },
+ 0x107E, 0x0066, 0x0074,
+ 0x18, 0x18, 0x18,
+ 0x020D, 0x5,
+ },
+ { /* PHY rev 4 */
+ { 8, 12, 17, 25 },
+ { -5, 6, 10, 14 },
+ { 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA },
+ { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+ 0x527E,
+ { 0x513F, 0x513F, 0x513F, 0x513F },
+ 0x007E, 0x0066, 0x0074,
+ 0x18, 0x18, 0x18,
+ 0x01A1, 0x5,
+ },
+ { /* PHY rev 5+ */
+ { 9, 13, 18, 26 },
+ { -3, 7, 11, 16 },
+ { 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA },
+ { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+ 0x427E, /* invalid for external LNA! */
+ { 0x413F, 0x413F, 0x413F, 0x413F }, /* invalid for external LNA! */
+ 0x1076, 0x0066, 0x106A,
+ 0xC, 0xC, 0xC,
+ 0x01D0, 0x5,
+ },
+ },
+ { /* 5GHz */
+ { /* PHY rev 3 */
+ { 7, 11, 17, 23 },
+ { -6, 2, 6, 10 },
+ { 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13 },
+ { 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 },
+ 0x52DE,
+ { 0x516F, 0x516F, 0x516F, 0x516F },
+ 0x00DE, 0x00CA, 0x00CC,
+ 0x1E, 0x1E, 0x1E,
+ 0x01A1, 25,
+ },
+ { /* PHY rev 4 */
+ { 8, 12, 18, 23 },
+ { -5, 2, 6, 10 },
+ { 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD },
+ { 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 },
+ 0x629E,
+ { 0x614F, 0x614F, 0x614F, 0x614F },
+ 0x029E, 0x1084, 0x0086,
+ 0x24, 0x24, 0x24,
+ 0x0107, 25,
+ },
+ { /* PHY rev 5+ */
+ { 6, 10, 16, 21 },
+ { -7, 0, 4, 8 },
+ { 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD, 0xD },
+ { 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 },
+ 0x729E,
+ { 0x714F, 0x714F, 0x714F, 0x714F },
+ 0x029E, 0x2084, 0x2086,
+ 0x24, 0x24, 0x24,
+ 0x00A9, 25,
+ },
+ },
+};
+
static inline void assert_ntab_array_sizes(void)
{
#undef check
@@ -2957,3 +3030,33 @@ void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev)
/* Volatile tables */
/* TODO */
}
+
+struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
+ struct b43_wldev *dev, bool ghz5, bool ext_lna)
+{
+ struct nphy_gain_ctl_workaround_entry *e;
+ u8 phy_idx;
+
+ B43_WARN_ON(dev->phy.rev < 3);
+ if (dev->phy.rev >= 5)
+ phy_idx = 2;
+ else if (dev->phy.rev == 4)
+ phy_idx = 1;
+ else
+ phy_idx = 0;
+
+ e = &nphy_gain_ctl_workaround[ghz5][phy_idx];
+
+ /* Only one entry differs for external LNA, so instead making whole
+ * table 2 times bigger, hack is here
+ */
+ if (!ghz5 && dev->phy.rev >= 5 && ext_lna) {
+ e->rfseq_init[0] &= 0x0FFF;
+ e->rfseq_init[1] &= 0x0FFF;
+ e->rfseq_init[2] &= 0x0FFF;
+ e->rfseq_init[3] &= 0x0FFF;
+ e->init_gain &= 0x0FFF;
+ }
+
+ return e;
+}
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 016a480..1856936 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -35,6 +35,31 @@ struct nphy_rf_control_override_rev3 {
u8 val_addr1;
};
+struct nphy_gain_ctl_workaround_entry {
+ s8 lna1_gain[4];
+ s8 lna2_gain[4];
+ u8 gain_db[10];
+ u8 gain_bits[10];
+
+ u16 init_gain;
+ u16 rfseq_init[4];
+
+ u16 cliphi_gain;
+ u16 clipmd_gain;
+ u16 cliplo_gain;
+
+ u16 crsmin;
+ u16 crsminl;
+ u16 crsminu;
+
+ u16 nbclip;
+ u16 wlclip;
+};
+
+/* Get entry with workaround values for gain ctl. Does not return NULL. */
+struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
+ struct b43_wldev *dev, bool ghz5, bool ext_lna);
+
/* Get the NPHY Channel Switch Table entry for a channel.
* Returns NULL on failure to find an entry. */
const struct b43_nphy_channeltab_entry_rev2 *
--
1.7.3.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/3] b43: N-PHY: rev3+: implement gain ctl workarounds
2011-03-01 20:40 ` Rafał Miłecki
@ 2011-03-01 20:40 ` Rafał Miłecki
-1 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2011-03-01 20:40 UTC (permalink / raw)
To: linux-wireless, John W. Linville; +Cc: b43-dev, Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 171 ++++++++++++++++++++++++++++++++++++--
1 files changed, 162 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index b8e2b2a..60c30e6 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1168,23 +1168,98 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
+ struct ssb_sprom *sprom = &(dev->dev->bus->sprom);
+
+ /* PHY rev 0, 1, 2 */
u8 i, j;
u8 code;
u16 tmp;
+ u8 rfseq_events[3] = { 6, 8, 7 };
+ u8 rfseq_delays[3] = { 10, 30, 1 };
- /* TODO: for PHY >= 3
- s8 *lna1_gain, *lna2_gain;
- u8 *gain_db, *gain_bits;
- u16 *rfseq_init;
+ /* PHY rev >= 3 */
+ bool ghz5;
+ bool ext_lna;
+ u16 rssi_gain;
+ struct nphy_gain_ctl_workaround_entry *e;
u8 lpf_gain[6] = { 0x00, 0x06, 0x0C, 0x12, 0x12, 0x12 };
u8 lpf_bits[6] = { 0, 1, 2, 3, 3, 3 };
- */
-
- u8 rfseq_events[3] = { 6, 8, 7 };
- u8 rfseq_delays[3] = { 10, 30, 1 };
if (dev->phy.rev >= 3) {
- /* TODO */
+ /* Prepare values */
+ ghz5 = b43_phy_read(dev, B43_NPHY_BANDCTL)
+ & B43_NPHY_BANDCTL_5GHZ;
+ ext_lna = sprom->boardflags_lo & B43_BFL_EXTLNA;
+ e = b43_nphy_get_gain_ctl_workaround_ent(dev, ghz5, ext_lna);
+ if (ghz5 && dev->phy.rev >= 5)
+ rssi_gain = 0x90;
+ else
+ rssi_gain = 0x50;
+
+ b43_phy_set(dev, B43_NPHY_RXCTL, 0x0040);
+
+ /* Set Clip 2 detect */
+ b43_phy_set(dev, B43_NPHY_C1_CGAINI,
+ B43_NPHY_C1_CGAINI_CL2DETECT);
+ b43_phy_set(dev, B43_NPHY_C2_CGAINI,
+ B43_NPHY_C2_CGAINI_CL2DETECT);
+
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAG1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_BIASPOLE_LNAG1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAG2_IDAC, 0xF0);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAG2_IDAC, 0xF0);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_RSSI_POLE, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_RSSI_POLE, 0x00);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_RSSI_GAIN,
+ rssi_gain);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_RSSI_GAIN,
+ rssi_gain);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAA1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_BIASPOLE_LNAA1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAA2_IDAC, 0xFF);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAA2_IDAC, 0xFF);
+
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 8), 4, e->lna1_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 8), 4, e->lna1_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 16), 4, e->lna2_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 16), 4, e->lna2_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 32), 10, e->gain_db);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 32), 10, e->gain_db);
+ b43_ntab_write_bulk(dev, B43_NTAB8(2, 32), 10, e->gain_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(3, 32), 10, e->gain_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 0x40), 6, lpf_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 0x40), 6, lpf_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(2, 0x40), 6, lpf_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(3, 0x40), 6, lpf_bits);
+
+ b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
+ b43_phy_write(dev, 0x2A7, e->init_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x106), 2,
+ e->rfseq_init);
+ b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
+
+ /* TODO: check defines. Do not match variables names */
+ b43_phy_write(dev, B43_NPHY_C1_CLIP1_MEDGAIN, e->cliphi_gain);
+ b43_phy_write(dev, 0x2A9, e->cliphi_gain);
+ b43_phy_write(dev, B43_NPHY_C1_CLIP2_GAIN, e->clipmd_gain);
+ b43_phy_write(dev, 0x2AB, e->clipmd_gain);
+ b43_phy_write(dev, B43_NPHY_C2_CLIP1_HIGAIN, e->cliplo_gain);
+ b43_phy_write(dev, 0x2AD, e->cliplo_gain);
+
+ b43_phy_maskset(dev, 0x27D, 0xFF00, e->crsmin);
+ b43_phy_maskset(dev, 0x280, 0xFF00, e->crsminl);
+ b43_phy_maskset(dev, 0x283, 0xFF00, e->crsminu);
+ b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, e->nbclip);
+ b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, e->nbclip);
+ b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
+ ~B43_NPHY_C1_CLIPWBTHRES_CLIP2, e->wlclip);
+ b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
+ ~B43_NPHY_C2_CLIPWBTHRES_CLIP2, e->wlclip);
+ b43_phy_write(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
} else {
/* Set Clip 2 detect */
b43_phy_set(dev, B43_NPHY_C1_CGAINI,
@@ -1308,6 +1383,9 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
u8 events2[7] = { 0x0, 0x3, 0x5, 0x4, 0x2, 0x1, 0x8 };
u8 delays2[7] = { 0x8, 0x6, 0x2, 0x4, 0x4, 0x6, 0x1 };
+ u16 tmp16;
+ u32 tmp32;
+
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
b43_nphy_classifier(dev, 1, 0);
else
@@ -1320,7 +1398,82 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
B43_NPHY_IQFLIP_ADC1 | B43_NPHY_IQFLIP_ADC2);
if (dev->phy.rev >= 3) {
+ tmp32 = b43_ntab_read(dev, B43_NTAB32(30, 0));
+ tmp32 &= 0xffffff;
+ b43_ntab_write(dev, B43_NTAB32(30, 0), tmp32);
+
+ b43_phy_write(dev, B43_NPHY_PHASETR_A0, 0x0125);
+ b43_phy_write(dev, B43_NPHY_PHASETR_A1, 0x01B3);
+ b43_phy_write(dev, B43_NPHY_PHASETR_A2, 0x0105);
+ b43_phy_write(dev, B43_NPHY_PHASETR_B0, 0x016E);
+ b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0x00CD);
+ b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x0020);
+
+ b43_phy_write(dev, B43_NPHY_C2_CLIP1_MEDGAIN, 0x000C);
+ b43_phy_write(dev, 0x2AE, 0x000C);
+
+ /* TODO */
+
+ tmp16 = (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) ?
+ 0x2 : 0x9C40;
+ b43_phy_write(dev, B43_NPHY_ENDROP_TLEN, tmp16);
+
+ b43_phy_maskset(dev, 0x294, 0xF0FF, 0x0700);
+
+ b43_ntab_write(dev, B43_NTAB32(16, 3), 0x18D);
+ b43_ntab_write(dev, B43_NTAB32(16, 127), 0x18D);
+
+ b43_nphy_gain_ctrl_workarounds(dev);
+
+ b43_ntab_write(dev, B43_NTAB32(8, 0), 2);
+ b43_ntab_write(dev, B43_NTAB32(8, 16), 2);
+
/* TODO */
+
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_MAST_BIAS, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_MAST_BIAS, 0x00);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_BIAS_MAIN, 0x06);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_BIAS_MAIN, 0x06);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_BIAS_AUX, 0x07);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_BIAS_AUX, 0x07);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_LOB_BIAS, 0x88);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_LOB_BIAS, 0x88);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXG_CMFB_IDAC, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXG_CMFB_IDAC, 0x00);
+
+ /* N PHY WAR TX Chain Update with hw_phytxchain as argument */
+
+ if ((bus->sprom.boardflags2_lo & B43_BFL2_APLL_WAR &&
+ b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ||
+ (bus->sprom.boardflags2_lo & B43_BFL2_GPLL_WAR &&
+ b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ))
+ tmp32 = 0x00088888;
+ else
+ tmp32 = 0x88888888;
+ b43_ntab_write(dev, B43_NTAB32(30, 1), tmp32);
+ b43_ntab_write(dev, B43_NTAB32(30, 2), tmp32);
+ b43_ntab_write(dev, B43_NTAB32(30, 3), tmp32);
+
+ if (dev->phy.rev == 4 &&
+ b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+ b43_radio_write(dev, B2056_TX0 | B2056_TX_GMBB_IDAC,
+ 0x70);
+ b43_radio_write(dev, B2056_TX1 | B2056_TX_GMBB_IDAC,
+ 0x70);
+ }
+
+ b43_phy_write(dev, 0x224, 0x039C);
+ b43_phy_write(dev, 0x225, 0x0357);
+ b43_phy_write(dev, 0x226, 0x0317);
+ b43_phy_write(dev, 0x227, 0x02D7);
+ b43_phy_write(dev, 0x228, 0x039C);
+ b43_phy_write(dev, 0x229, 0x0357);
+ b43_phy_write(dev, 0x22A, 0x0317);
+ b43_phy_write(dev, 0x22B, 0x02D7);
+ b43_phy_write(dev, 0x22C, 0x039C);
+ b43_phy_write(dev, 0x22D, 0x0357);
+ b43_phy_write(dev, 0x22E, 0x0317);
+ b43_phy_write(dev, 0x22F, 0x02D7);
} else {
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ &&
nphy->band5g_pwrgain) {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/3] b43: N-PHY: rev3+: implement gain ctl workarounds
@ 2011-03-01 20:40 ` Rafał Miłecki
0 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2011-03-01 20:40 UTC (permalink / raw)
To: linux-wireless, John W. Linville; +Cc: b43-dev, Rafał Miłecki
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 171 ++++++++++++++++++++++++++++++++++++--
1 files changed, 162 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index b8e2b2a..60c30e6 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1168,23 +1168,98 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
+ struct ssb_sprom *sprom = &(dev->dev->bus->sprom);
+
+ /* PHY rev 0, 1, 2 */
u8 i, j;
u8 code;
u16 tmp;
+ u8 rfseq_events[3] = { 6, 8, 7 };
+ u8 rfseq_delays[3] = { 10, 30, 1 };
- /* TODO: for PHY >= 3
- s8 *lna1_gain, *lna2_gain;
- u8 *gain_db, *gain_bits;
- u16 *rfseq_init;
+ /* PHY rev >= 3 */
+ bool ghz5;
+ bool ext_lna;
+ u16 rssi_gain;
+ struct nphy_gain_ctl_workaround_entry *e;
u8 lpf_gain[6] = { 0x00, 0x06, 0x0C, 0x12, 0x12, 0x12 };
u8 lpf_bits[6] = { 0, 1, 2, 3, 3, 3 };
- */
-
- u8 rfseq_events[3] = { 6, 8, 7 };
- u8 rfseq_delays[3] = { 10, 30, 1 };
if (dev->phy.rev >= 3) {
- /* TODO */
+ /* Prepare values */
+ ghz5 = b43_phy_read(dev, B43_NPHY_BANDCTL)
+ & B43_NPHY_BANDCTL_5GHZ;
+ ext_lna = sprom->boardflags_lo & B43_BFL_EXTLNA;
+ e = b43_nphy_get_gain_ctl_workaround_ent(dev, ghz5, ext_lna);
+ if (ghz5 && dev->phy.rev >= 5)
+ rssi_gain = 0x90;
+ else
+ rssi_gain = 0x50;
+
+ b43_phy_set(dev, B43_NPHY_RXCTL, 0x0040);
+
+ /* Set Clip 2 detect */
+ b43_phy_set(dev, B43_NPHY_C1_CGAINI,
+ B43_NPHY_C1_CGAINI_CL2DETECT);
+ b43_phy_set(dev, B43_NPHY_C2_CGAINI,
+ B43_NPHY_C2_CGAINI_CL2DETECT);
+
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAG1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_BIASPOLE_LNAG1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAG2_IDAC, 0xF0);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAG2_IDAC, 0xF0);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_RSSI_POLE, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_RSSI_POLE, 0x00);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_RSSI_GAIN,
+ rssi_gain);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_RSSI_GAIN,
+ rssi_gain);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAA1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_BIASPOLE_LNAA1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAA2_IDAC, 0xFF);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAA2_IDAC, 0xFF);
+
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 8), 4, e->lna1_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 8), 4, e->lna1_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 16), 4, e->lna2_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 16), 4, e->lna2_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 32), 10, e->gain_db);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 32), 10, e->gain_db);
+ b43_ntab_write_bulk(dev, B43_NTAB8(2, 32), 10, e->gain_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(3, 32), 10, e->gain_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 0x40), 6, lpf_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 0x40), 6, lpf_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(2, 0x40), 6, lpf_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(3, 0x40), 6, lpf_bits);
+
+ b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
+ b43_phy_write(dev, 0x2A7, e->init_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x106), 2,
+ e->rfseq_init);
+ b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
+
+ /* TODO: check defines. Do not match variables names */
+ b43_phy_write(dev, B43_NPHY_C1_CLIP1_MEDGAIN, e->cliphi_gain);
+ b43_phy_write(dev, 0x2A9, e->cliphi_gain);
+ b43_phy_write(dev, B43_NPHY_C1_CLIP2_GAIN, e->clipmd_gain);
+ b43_phy_write(dev, 0x2AB, e->clipmd_gain);
+ b43_phy_write(dev, B43_NPHY_C2_CLIP1_HIGAIN, e->cliplo_gain);
+ b43_phy_write(dev, 0x2AD, e->cliplo_gain);
+
+ b43_phy_maskset(dev, 0x27D, 0xFF00, e->crsmin);
+ b43_phy_maskset(dev, 0x280, 0xFF00, e->crsminl);
+ b43_phy_maskset(dev, 0x283, 0xFF00, e->crsminu);
+ b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, e->nbclip);
+ b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, e->nbclip);
+ b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
+ ~B43_NPHY_C1_CLIPWBTHRES_CLIP2, e->wlclip);
+ b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
+ ~B43_NPHY_C2_CLIPWBTHRES_CLIP2, e->wlclip);
+ b43_phy_write(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
} else {
/* Set Clip 2 detect */
b43_phy_set(dev, B43_NPHY_C1_CGAINI,
@@ -1308,6 +1383,9 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
u8 events2[7] = { 0x0, 0x3, 0x5, 0x4, 0x2, 0x1, 0x8 };
u8 delays2[7] = { 0x8, 0x6, 0x2, 0x4, 0x4, 0x6, 0x1 };
+ u16 tmp16;
+ u32 tmp32;
+
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
b43_nphy_classifier(dev, 1, 0);
else
@@ -1320,7 +1398,82 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
B43_NPHY_IQFLIP_ADC1 | B43_NPHY_IQFLIP_ADC2);
if (dev->phy.rev >= 3) {
+ tmp32 = b43_ntab_read(dev, B43_NTAB32(30, 0));
+ tmp32 &= 0xffffff;
+ b43_ntab_write(dev, B43_NTAB32(30, 0), tmp32);
+
+ b43_phy_write(dev, B43_NPHY_PHASETR_A0, 0x0125);
+ b43_phy_write(dev, B43_NPHY_PHASETR_A1, 0x01B3);
+ b43_phy_write(dev, B43_NPHY_PHASETR_A2, 0x0105);
+ b43_phy_write(dev, B43_NPHY_PHASETR_B0, 0x016E);
+ b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0x00CD);
+ b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x0020);
+
+ b43_phy_write(dev, B43_NPHY_C2_CLIP1_MEDGAIN, 0x000C);
+ b43_phy_write(dev, 0x2AE, 0x000C);
+
+ /* TODO */
+
+ tmp16 = (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) ?
+ 0x2 : 0x9C40;
+ b43_phy_write(dev, B43_NPHY_ENDROP_TLEN, tmp16);
+
+ b43_phy_maskset(dev, 0x294, 0xF0FF, 0x0700);
+
+ b43_ntab_write(dev, B43_NTAB32(16, 3), 0x18D);
+ b43_ntab_write(dev, B43_NTAB32(16, 127), 0x18D);
+
+ b43_nphy_gain_ctrl_workarounds(dev);
+
+ b43_ntab_write(dev, B43_NTAB32(8, 0), 2);
+ b43_ntab_write(dev, B43_NTAB32(8, 16), 2);
+
/* TODO */
+
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_MAST_BIAS, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_MAST_BIAS, 0x00);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_BIAS_MAIN, 0x06);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_BIAS_MAIN, 0x06);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_BIAS_AUX, 0x07);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_BIAS_AUX, 0x07);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXA_LOB_BIAS, 0x88);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXA_LOB_BIAS, 0x88);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_MIXG_CMFB_IDAC, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_MIXG_CMFB_IDAC, 0x00);
+
+ /* N PHY WAR TX Chain Update with hw_phytxchain as argument */
+
+ if ((bus->sprom.boardflags2_lo & B43_BFL2_APLL_WAR &&
+ b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ||
+ (bus->sprom.boardflags2_lo & B43_BFL2_GPLL_WAR &&
+ b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ))
+ tmp32 = 0x00088888;
+ else
+ tmp32 = 0x88888888;
+ b43_ntab_write(dev, B43_NTAB32(30, 1), tmp32);
+ b43_ntab_write(dev, B43_NTAB32(30, 2), tmp32);
+ b43_ntab_write(dev, B43_NTAB32(30, 3), tmp32);
+
+ if (dev->phy.rev == 4 &&
+ b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+ b43_radio_write(dev, B2056_TX0 | B2056_TX_GMBB_IDAC,
+ 0x70);
+ b43_radio_write(dev, B2056_TX1 | B2056_TX_GMBB_IDAC,
+ 0x70);
+ }
+
+ b43_phy_write(dev, 0x224, 0x039C);
+ b43_phy_write(dev, 0x225, 0x0357);
+ b43_phy_write(dev, 0x226, 0x0317);
+ b43_phy_write(dev, 0x227, 0x02D7);
+ b43_phy_write(dev, 0x228, 0x039C);
+ b43_phy_write(dev, 0x229, 0x0357);
+ b43_phy_write(dev, 0x22A, 0x0317);
+ b43_phy_write(dev, 0x22B, 0x02D7);
+ b43_phy_write(dev, 0x22C, 0x039C);
+ b43_phy_write(dev, 0x22D, 0x0357);
+ b43_phy_write(dev, 0x22E, 0x0317);
+ b43_phy_write(dev, 0x22F, 0x02D7);
} else {
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ &&
nphy->band5g_pwrgain) {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-03-01 20:40 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-03-01 20:40 [PATCH 1/3] b43: N-PHY: rev3+: correct switching analog core Rafał Miłecki
2011-03-01 20:40 ` Rafał Miłecki
2011-03-01 20:40 ` [PATCH 2/3] b43: N-PHY: rev3+: add tables with gain ctl workarounds Rafał Miłecki
2011-03-01 20:40 ` Rafał Miłecki
2011-03-01 20:40 ` [PATCH 3/3] b43: N-PHY: rev3+: implement " Rafał Miłecki
2011-03-01 20:40 ` Rafał Miłecki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.