All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
	"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org,
	"Julian Calaby" <julian.calaby@gmail.com>,
	"Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 3/4] b43: use new pointers path to access ssb_device in SSB specific places
Date: Thu, 19 May 2011 15:11:26 +0200	[thread overview]
Message-ID: <1305810687-4567-3-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1305810687-4567-1-git-send-email-zajec5@gmail.com>


Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
 drivers/net/wireless/b43/main.c |   28 +++++++++++++++++-----------
 1 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index bb82ddf..99411da 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1146,6 +1146,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 
 static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 {
+	struct ssb_device *sdev = dev->dev->sdev;
 	u32 tmslow;
 
 	flags |= B43_TMSLOW_PHYCLKEN;
@@ -1156,15 +1157,15 @@ static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 	msleep(2);		/* Wait for the PLL to turn on. */
 
 	/* Now take the PHY out of Reset again */
-	tmslow = ssb_read32(dev->sdev, SSB_TMSLOW);
+	tmslow = ssb_read32(sdev, SSB_TMSLOW);
 	tmslow |= SSB_TMSLOW_FGC;
 	tmslow &= ~B43_TMSLOW_PHYRESET;
-	ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
-	ssb_read32(dev->sdev, SSB_TMSLOW);	/* flush */
+	ssb_write32(sdev, SSB_TMSLOW, tmslow);
+	ssb_read32(sdev, SSB_TMSLOW);	/* flush */
 	msleep(1);
 	tmslow &= ~SSB_TMSLOW_FGC;
-	ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
-	ssb_read32(dev->sdev, SSB_TMSLOW);	/* flush */
+	ssb_write32(sdev, SSB_TMSLOW, tmslow);
+	ssb_read32(sdev, SSB_TMSLOW);	/* flush */
 	msleep(1);
 }
 
@@ -2157,7 +2158,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 	switch (dev->phy.type) {
 	case B43_PHYTYPE_A:
 		if ((rev >= 5) && (rev <= 10)) {
-			tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
+			tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
 			if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
 				filename = "a0g1initvals5";
 			else
@@ -2202,7 +2203,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 	switch (dev->phy.type) {
 	case B43_PHYTYPE_A:
 		if ((rev >= 5) && (rev <= 10)) {
-			tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
+			tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
 			if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
 				filename = "a0g1bsinitvals5";
 			else
@@ -2566,7 +2567,7 @@ out:
  */
 static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
 {
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus = dev->dev->sdev->bus;
 
 #ifdef CONFIG_SSB_DRIVER_PCICORE
 	return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
@@ -4231,16 +4232,21 @@ static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
 
 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
 {
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus;
 	u32 tmp;
 
+	if (dev->dev->bus_type != B43_BUS_SSB)
+		return;
+
+	bus = dev->dev->sdev->bus;
+
 	if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) ||
 	    (bus->chip_id == 0x4312)) {
-		tmp = ssb_read32(dev->sdev, SSB_IMCFGLO);
+		tmp = ssb_read32(dev->dev->sdev, SSB_IMCFGLO);
 		tmp &= ~SSB_IMCFGLO_REQTO;
 		tmp &= ~SSB_IMCFGLO_SERTO;
 		tmp |= 0x3;
-		ssb_write32(dev->sdev, SSB_IMCFGLO, tmp);
+		ssb_write32(dev->dev->sdev, SSB_IMCFGLO, tmp);
 		ssb_commit_settings(bus);
 	}
 }
-- 
1.7.3.4


WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
	"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org,
	"Julian Calaby" <julian.calaby@gmail.com>,
	"Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 3/4] b43: use new pointers path to access ssb_device in SSB specific places
Date: Thu, 19 May 2011 15:11:26 +0200	[thread overview]
Message-ID: <1305810687-4567-3-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1305810687-4567-1-git-send-email-zajec5@gmail.com>


Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
 drivers/net/wireless/b43/main.c |   28 +++++++++++++++++-----------
 1 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index bb82ddf..99411da 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1146,6 +1146,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 
 static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 {
+	struct ssb_device *sdev = dev->dev->sdev;
 	u32 tmslow;
 
 	flags |= B43_TMSLOW_PHYCLKEN;
@@ -1156,15 +1157,15 @@ static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 	msleep(2);		/* Wait for the PLL to turn on. */
 
 	/* Now take the PHY out of Reset again */
-	tmslow = ssb_read32(dev->sdev, SSB_TMSLOW);
+	tmslow = ssb_read32(sdev, SSB_TMSLOW);
 	tmslow |= SSB_TMSLOW_FGC;
 	tmslow &= ~B43_TMSLOW_PHYRESET;
-	ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
-	ssb_read32(dev->sdev, SSB_TMSLOW);	/* flush */
+	ssb_write32(sdev, SSB_TMSLOW, tmslow);
+	ssb_read32(sdev, SSB_TMSLOW);	/* flush */
 	msleep(1);
 	tmslow &= ~SSB_TMSLOW_FGC;
-	ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
-	ssb_read32(dev->sdev, SSB_TMSLOW);	/* flush */
+	ssb_write32(sdev, SSB_TMSLOW, tmslow);
+	ssb_read32(sdev, SSB_TMSLOW);	/* flush */
 	msleep(1);
 }
 
@@ -2157,7 +2158,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 	switch (dev->phy.type) {
 	case B43_PHYTYPE_A:
 		if ((rev >= 5) && (rev <= 10)) {
-			tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
+			tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
 			if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
 				filename = "a0g1initvals5";
 			else
@@ -2202,7 +2203,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 	switch (dev->phy.type) {
 	case B43_PHYTYPE_A:
 		if ((rev >= 5) && (rev <= 10)) {
-			tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
+			tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
 			if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
 				filename = "a0g1bsinitvals5";
 			else
@@ -2566,7 +2567,7 @@ out:
  */
 static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
 {
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus = dev->dev->sdev->bus;
 
 #ifdef CONFIG_SSB_DRIVER_PCICORE
 	return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
@@ -4231,16 +4232,21 @@ static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
 
 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
 {
-	struct ssb_bus *bus = dev->sdev->bus;
+	struct ssb_bus *bus;
 	u32 tmp;
 
+	if (dev->dev->bus_type != B43_BUS_SSB)
+		return;
+
+	bus = dev->dev->sdev->bus;
+
 	if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) ||
 	    (bus->chip_id == 0x4312)) {
-		tmp = ssb_read32(dev->sdev, SSB_IMCFGLO);
+		tmp = ssb_read32(dev->dev->sdev, SSB_IMCFGLO);
 		tmp &= ~SSB_IMCFGLO_REQTO;
 		tmp &= ~SSB_IMCFGLO_SERTO;
 		tmp |= 0x3;
-		ssb_write32(dev->sdev, SSB_IMCFGLO, tmp);
+		ssb_write32(dev->dev->sdev, SSB_IMCFGLO, tmp);
 		ssb_commit_settings(bus);
 	}
 }
-- 
1.7.3.4

  parent reply	other threads:[~2011-05-19 12:33 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-19 13:11 [PATCH 1/4] b43: LP-PHY: use new pointers path to access ssb_device Rafał Miłecki
2011-05-19 13:11 ` Rafał Miłecki
2011-05-19 13:11 ` [PATCH 2/4] b43: SDIO: " Rafał Miłecki
2011-05-19 13:11   ` Rafał Miłecki
2011-05-19 13:11 ` Rafał Miłecki [this message]
2011-05-19 13:11   ` [PATCH 3/4] b43: use new pointers path to access ssb_device in SSB specific places Rafał Miłecki
2011-05-19 13:11 ` [PATCH 4/4] b43: bus: add helpers for checking host type Rafał Miłecki
2011-05-19 13:11   ` Rafał Miłecki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1305810687-4567-3-git-send-email-zajec5@gmail.com \
    --to=zajec5@gmail.com \
    --cc=b43-dev@lists.infradead.org \
    --cc=julian.calaby@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.