[patch 0/6] x86: x2apic cluster optimizations and apic probe cleanups

[patch 0/6] x86: x2apic cluster optimizations and apic probe cleanups

[Suresh Siddha]

Ingo, Here is the updated patchset for optimizing IPI's in the
x2apic cluster mode aswell as clean the apic probe code by using
apicdriver section.

Previous version can be found at: https://lkml.org/lkml/2011/5/13/341

thanks,
suresh

[patch 1/6] x84_64, apic: use probe routines to simplify apic selection

[Suresh Siddha]

[-- Attachment #1: x64_apic_probe.patch --]
[-- Type: text/plain, Size: 4341 bytes --]

Use the unused probe routine in the apic driver to finalize the apic model
selection. This cleans up the default_setup_apic_routing() and this probe
routine in future can also be used for doing any apic model specific
initialisation.

Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/kernel/apic/apic_flat_64.c   |   10 +++++++++-
 arch/x86/kernel/apic/probe_64.c       |   22 +++++++---------------
 arch/x86/kernel/apic/x2apic_cluster.c |    7 ++++++-
 arch/x86/kernel/apic/x2apic_phys.c    |   10 +++++++++-
 arch/x86/kernel/apic/x2apic_uv_x.c    |    7 ++++++-
 5 files changed, 37 insertions(+), 19 deletions(-)

Index: linux-2.6-tip/arch/x86/kernel/apic/apic_flat_64.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/apic_flat_64.c
+++ linux-2.6-tip/arch/x86/kernel/apic/apic_flat_64.c
@@ -312,10 +312,18 @@ physflat_cpu_mask_to_apicid_and(const st
 	return per_cpu(x86_cpu_to_apicid, cpu);
 }
 
+static int physflat_probe(void)
+{
+	if (apic == &apic_physflat || num_possible_cpus() > 8)
+		return 1;
+
+	return 0;
+}
+
 struct apic apic_physflat =  {
 
 	.name				= "physical flat",
-	.probe				= NULL,
+	.probe				= physflat_probe,
 	.acpi_madt_oem_check		= physflat_acpi_madt_oem_check,
 	.apic_id_registered		= flat_apic_id_registered,
 
Index: linux-2.6-tip/arch/x86/kernel/apic/probe_64.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/probe_64.c
+++ linux-2.6-tip/arch/x86/kernel/apic/probe_64.c
@@ -54,26 +54,18 @@ static int apicid_phys_pkg_id(int initia
  */
 void __init default_setup_apic_routing(void)
 {
+	int i;
 
 	enable_IR_x2apic();
 
-#ifdef CONFIG_X86_X2APIC
-	if (x2apic_mode
-#ifdef CONFIG_X86_UV
-		       && apic != &apic_x2apic_uv_x
-#endif
-		       ) {
-		if (x2apic_phys)
-			apic = &apic_x2apic_phys;
-		else
-			apic = &apic_x2apic_cluster;
+	for (i = 0; apic_probe[i]; ++i) {
+		if (apic_probe[i]->probe()) {
+			apic = apic_probe[i];
+			break;
+		}
 	}
-#endif
-
-	if (apic == &apic_flat && num_possible_cpus() > 8)
-			apic = &apic_physflat;
 
-	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
+	printk(KERN_INFO "APIC routing finalized to %s.\n", apic->name);
 
 	if (is_vsmp_box()) {
 		/* need to update phys_pkg_id */
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_cluster.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
@@ -184,10 +184,15 @@ static void init_x2apic_ldr(void)
 	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
 }
 
+static int x2apic_cluster_probe(void)
+{
+	return x2apic_mode;
+}
+
 struct apic apic_x2apic_cluster = {
 
 	.name				= "cluster x2apic",
-	.probe				= NULL,
+	.probe				= x2apic_cluster_probe,
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
 	.apic_id_registered		= x2apic_apic_id_registered,
 
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_phys.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_phys.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_phys.c
@@ -173,10 +173,18 @@ static void init_x2apic_ldr(void)
 {
 }
 
+static int x2apic_phys_probe(void)
+{
+	if (x2apic_mode && x2apic_phys)
+		return 1;
+
+	return apic == &apic_x2apic_phys;
+}
+
 struct apic apic_x2apic_phys = {
 
 	.name				= "physical x2apic",
-	.probe				= NULL,
+	.probe				= x2apic_phys_probe,
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
 	.apic_id_registered		= x2apic_apic_id_registered,
 
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_uv_x.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -326,10 +326,15 @@ static void uv_send_IPI_self(int vector)
 	apic_write(APIC_SELF_IPI, vector);
 }
 
+static int uv_probe(void)
+{
+	return apic == &apic_x2apic_uv_x;
+}
+
 struct apic __refdata apic_x2apic_uv_x = {
 
 	.name				= "UV large system",
-	.probe				= NULL,
+	.probe				= uv_probe,
 	.acpi_madt_oem_check		= uv_acpi_madt_oem_check,
 	.apic_id_registered		= uv_apic_id_registered,
 

[patch 2/6] x86, x2apic: remove duplicate code for IPI mask routines

[Suresh Siddha]

[-- Attachment #1: consolidate_x2apic_ipi_mask_routines.patch --]
[-- Type: text/plain, Size: 4954 bytes --]

Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/kernel/apic/x2apic_cluster.c |   48 +++++++++++-----------------------
 arch/x86/kernel/apic/x2apic_phys.c    |   45 ++++++++++---------------------
 2 files changed, 31 insertions(+), 62 deletions(-)

Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_cluster.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
@@ -54,64 +54,48 @@ static void
  * at once. We have 16 cpu's in a cluster. This will minimize IPI register
  * writes.
  */
-static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+static void
+__x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
 	unsigned long query_cpu;
+	unsigned long this_cpu;
 	unsigned long flags;
 
 	x2apic_wrmsr_fence();
 
 	local_irq_save(flags);
+
+	this_cpu = smp_processor_id();
 	for_each_cpu(query_cpu, mask) {
+		if (apic_dest == APIC_DEST_ALLBUT && query_cpu == this_cpu)
+			continue;
 		__x2apic_send_IPI_dest(
 			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
 			vector, apic->dest_logical);
 	}
+
 	local_irq_restore(flags);
 }
 
+static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLINC);
+}
+
 static void
  x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	x2apic_wrmsr_fence();
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, apic->dest_logical);
-	}
-	local_irq_restore(flags);
+	__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLBUT);
 }
 
 static void x2apic_send_IPI_allbutself(int vector)
 {
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	x2apic_wrmsr_fence();
-
-	local_irq_save(flags);
-	for_each_online_cpu(query_cpu) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, apic->dest_logical);
-	}
-	local_irq_restore(flags);
+	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLBUT);
 }
 
 static void x2apic_send_IPI_all(int vector)
 {
-	x2apic_send_IPI_mask(cpu_online_mask, vector);
+	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
 }
 
 static int x2apic_apic_id_registered(void)
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_phys.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_phys.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_phys.c
@@ -55,61 +55,46 @@ static void __x2apic_send_IPI_dest(unsig
 	native_x2apic_icr_write(cfg, apicid);
 }
 
-static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+static void
+__x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
 	unsigned long query_cpu;
+	unsigned long this_cpu;
 	unsigned long flags;
 
 	x2apic_wrmsr_fence();
 
 	local_irq_save(flags);
+
+	this_cpu = smp_processor_id();
 	for_each_cpu(query_cpu, mask) {
+		if (apic_dest == APIC_DEST_ALLBUT && this_cpu == query_cpu)
+			continue;
 		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
 				       vector, APIC_DEST_PHYSICAL);
 	}
 	local_irq_restore(flags);
 }
 
+static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLINC);
+}
+
 static void
  x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	x2apic_wrmsr_fence();
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu != this_cpu)
-			__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_apicid, query_cpu),
-				vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
+	__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLBUT);
 }
 
 static void x2apic_send_IPI_allbutself(int vector)
 {
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	x2apic_wrmsr_fence();
-
-	local_irq_save(flags);
-	for_each_online_cpu(query_cpu) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
-				       vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
+	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLBUT);
 }
 
 static void x2apic_send_IPI_all(int vector)
 {
-	x2apic_send_IPI_mask(cpu_online_mask, vector);
+	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
 }
 
 static int x2apic_apic_id_registered(void)

[patch 3/6] x86, x2apic: track the x2apic cluster sibling map

[Suresh Siddha]

[-- Attachment #1: track_x2apic_cluster_info.patch --]
[-- Type: text/plain, Size: 3337 bytes --]

From: Cyrill Gorcunov <gorcunov@openvz.org>

In the case of x2apic cluster mode, we can group IPI register writes based on
the cluster group instead of individual per-cpu destination messages.

For this purpose, track the cpu's that belong to the same x2apic cluster.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/kernel/apic/x2apic_cluster.c |   72 +++++++++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 2 deletions(-)

Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_cluster.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
@@ -11,6 +11,7 @@
 #include <asm/ipi.h>
 
 static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
+static DEFINE_PER_CPU(cpumask_var_t, cpus_in_cluster);
 
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
@@ -48,6 +49,11 @@ static void
 	native_x2apic_icr_write(cfg, apicid);
 }
 
+static inline u32 x2apic_cluster(int cpu)
+{
+	return per_cpu(x86_cpu_to_logical_apicid, cpu) >> 16;
+}
+
 /*
  * for now, we send the IPI's one by one in the cpumask.
  * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
@@ -163,14 +169,76 @@ static void x2apic_send_IPI_self(int vec
 
 static void init_x2apic_ldr(void)
 {
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+
+	per_cpu(x86_cpu_to_logical_apicid, this_cpu) = apic_read(APIC_LDR);
+
+	__cpu_set(this_cpu, per_cpu(cpus_in_cluster, this_cpu));
+	for_each_online_cpu(cpu) {
+		if (x2apic_cluster(this_cpu) != x2apic_cluster(cpu))
+			continue;
+		__cpu_set(this_cpu, per_cpu(cpus_in_cluster, cpu));
+		__cpu_set(cpu, per_cpu(cpus_in_cluster, this_cpu));
+	}
+}
+
+ /*
+  * At CPU state changes, update the x2apic cluster sibling info.
+  */
+static int __cpuinit
+update_clusterinfo(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int this_cpu = (unsigned long)hcpu;
+	unsigned int cpu;
+	int err = 0;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+		if (!zalloc_cpumask_var(&per_cpu(cpus_in_cluster, this_cpu),
+					GFP_KERNEL)) {
+			err = -ENOMEM;
+		}
+		break;
+	case CPU_UP_CANCELED:
+	case CPU_UP_CANCELED_FROZEN:
+	case CPU_DEAD:
+		for_each_online_cpu(cpu) {
+			if (x2apic_cluster(this_cpu) != x2apic_cluster(cpu))
+				continue;
+			__cpu_clear(this_cpu, per_cpu(cpus_in_cluster, cpu));
+			__cpu_clear(cpu, per_cpu(cpus_in_cluster, this_cpu));
+		}
+		free_cpumask_var(per_cpu(cpus_in_cluster, this_cpu));
+		break;
+	}
+
+	return notifier_from_errno(err);
+}
+
+static struct notifier_block __refdata x2apic_cpu_notifier = {
+	.notifier_call = update_clusterinfo,
+};
+
+static int x2apic_init_cpu_notifier(void)
+{
 	int cpu = smp_processor_id();
 
-	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
+	zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
+
+	BUG_ON(!per_cpu(cpus_in_cluster, cpu));
+
+	__cpu_set(cpu, per_cpu(cpus_in_cluster, cpu));
+	register_hotcpu_notifier(&x2apic_cpu_notifier);
+	return 1;
 }
 
 static int x2apic_cluster_probe(void)
 {
-	return x2apic_mode;
+	if (x2apic_mode)
+		return x2apic_init_cpu_notifier();
+	else
+		return 0;
 }
 
 struct apic apic_x2apic_cluster = {

[patch 4/6] x86, x2apic: minimize IPI register writes using cluster groups

[Suresh Siddha]

[-- Attachment #1: minimize_IPI_register_writes_using_cluster_groups.patch --]
[-- Type: text/plain, Size: 4412 bytes --]

From: Cyrill Gorcunov <gorcunov@openvz.org>

In the case of x2apic cluster mode we can group IPI register writes based
on the cluster group instead of individual per-cpu destination messages.

This reduces the apic register writes and reduces the amount of IPI messages
(in the best case we can reduce it by a factor of 16).

With this change, the cost of flush_tlb_others(), with the flush tlb IPI being
sent from a cpu in the socket-1 to all the logical cpus in socket-2 (on a
Westmere-EX system that has 20 logical cpus in a socket) is 3x times better now
(compared to the former 'send one-by-one' algorithm).

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/kernel/apic/x2apic_cluster.c |   58 +++++++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 14 deletions(-)

Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_cluster.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
@@ -5,6 +5,7 @@
 #include <linux/ctype.h>
 #include <linux/init.h>
 #include <linux/dmar.h>
+#include <linux/cpu.h>
 
 #include <asm/smp.h>
 #include <asm/apic.h>
@@ -12,6 +13,7 @@
 
 static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 static DEFINE_PER_CPU(cpumask_var_t, cpus_in_cluster);
+static DEFINE_PER_CPU(cpumask_var_t, ipi_mask);
 
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
@@ -54,30 +56,52 @@ static inline u32 x2apic_cluster(int cpu
 	return per_cpu(x86_cpu_to_logical_apicid, cpu) >> 16;
 }
 
-/*
- * for now, we send the IPI's one by one in the cpumask.
- * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
- * at once. We have 16 cpu's in a cluster. This will minimize IPI register
- * writes.
- */
 static void
 __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
-	unsigned long query_cpu;
-	unsigned long this_cpu;
+	struct cpumask *cpus_in_cluster_ptr;
+	struct cpumask *ipi_mask_ptr;
+	unsigned int cpu, this_cpu;
 	unsigned long flags;
+	u32 dest;
 
 	x2apic_wrmsr_fence();
 
 	local_irq_save(flags);
 
 	this_cpu = smp_processor_id();
-	for_each_cpu(query_cpu, mask) {
-		if (apic_dest == APIC_DEST_ALLBUT && query_cpu == this_cpu)
+
+	/*
+	 * We are to modify mask, so we need an own copy
+	 * and be sure it's manipulated with irq off.
+	 */
+	ipi_mask_ptr = __raw_get_cpu_var(ipi_mask);
+	cpumask_copy(ipi_mask_ptr, mask);
+
+	/*
+	 * The idea is to send one IPI per cluster.
+	 */
+	for_each_cpu(cpu, ipi_mask_ptr) {
+		unsigned long i;
+
+		cpus_in_cluster_ptr = per_cpu(cpus_in_cluster, cpu);
+		dest = 0;
+
+		/* Collect cpus in cluster. */
+		for_each_cpu_and(i, ipi_mask_ptr, cpus_in_cluster_ptr) {
+			if (apic_dest == APIC_DEST_ALLINC || i != this_cpu)
+				dest |= per_cpu(x86_cpu_to_logical_apicid, i);
+		}
+
+		if (!dest)
 			continue;
-		__x2apic_send_IPI_dest(
-			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-			vector, apic->dest_logical);
+
+		__x2apic_send_IPI_dest(dest, vector, apic->dest_logical);
+		/*
+		 * Cluster sibling cpus should be discared now so
+		 * we would not send IPI them second time.
+		 */
+		cpumask_andnot(ipi_mask_ptr, ipi_mask_ptr, cpus_in_cluster_ptr);
 	}
 
 	local_irq_restore(flags);
@@ -198,6 +222,10 @@ update_clusterinfo(struct notifier_block
 		if (!zalloc_cpumask_var(&per_cpu(cpus_in_cluster, this_cpu),
 					GFP_KERNEL)) {
 			err = -ENOMEM;
+		} else if (!zalloc_cpumask_var(&per_cpu(ipi_mask, this_cpu),
+					       GFP_KERNEL)) {
+			free_cpumask_var(per_cpu(cpus_in_cluster, this_cpu));
+			err = -ENOMEM;
 		}
 		break;
 	case CPU_UP_CANCELED:
@@ -210,6 +238,7 @@ update_clusterinfo(struct notifier_block
 			__cpu_clear(cpu, per_cpu(cpus_in_cluster, this_cpu));
 		}
 		free_cpumask_var(per_cpu(cpus_in_cluster, this_cpu));
+		free_cpumask_var(per_cpu(ipi_mask, this_cpu));
 		break;
 	}
 
@@ -225,8 +254,9 @@ static int x2apic_init_cpu_notifier(void
 	int cpu = smp_processor_id();
 
 	zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
+	zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL);
 
-	BUG_ON(!per_cpu(cpus_in_cluster, cpu));
+	BUG_ON(!per_cpu(cpus_in_cluster, cpu) || !per_cpu(ipi_mask, cpu));
 
 	__cpu_set(cpu, per_cpu(cpus_in_cluster, cpu));
 	register_hotcpu_notifier(&x2apic_cpu_notifier);

[patch 5/6] x86, x2apic: move the common bits to x2apic.h

[Suresh Siddha]

[-- Attachment #1: move_the_common_bits_of_physical_and_cluster_modes_to_x2apic.patch --]
[-- Type: text/plain, Size: 7012 bytes --]

From: Cyrill Gorcunov <gorcunov@openvz.org>

To eliminate code duplication.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/include/asm/x2apic.h         |   62 +++++++++++++++++++++++++++++
 arch/x86/kernel/apic/x2apic_cluster.c |   71 +---------------------------------
 arch/x86/kernel/apic/x2apic_phys.c    |   60 +---------------------------
 3 files changed, 69 insertions(+), 124 deletions(-)

Index: linux-2.6-tip/arch/x86/include/asm/x2apic.h
===================================================================
--- /dev/null
+++ linux-2.6-tip/arch/x86/include/asm/x2apic.h
@@ -0,0 +1,62 @@
+/*
+ * Common bits for X2APIC cluster/physical modes.
+ */
+
+#ifndef _ASM_X86_X2APIC_H
+#define _ASM_X86_X2APIC_H
+
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <linux/cpumask.h>
+
+/*
+ * Need to use more than cpu 0, because we need more vectors
+ * when MSI-X are used.
+ */
+static const struct cpumask *x2apic_target_cpus(void)
+{
+	return cpu_online_mask;
+}
+
+static int x2apic_apic_id_registered(void)
+{
+	return 1;
+}
+
+/*
+ * For now each logical cpu is in its own vector allocation domain.
+ */
+static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+static void
+__x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest)
+{
+	unsigned long cfg = __prepare_ICR(0, vector, dest);
+	native_x2apic_icr_write(cfg, apicid);
+}
+
+static unsigned int x2apic_get_apic_id(unsigned long id)
+{
+	return id;
+}
+
+static unsigned long x2apic_set_apic_id(unsigned int id)
+{
+	return id;
+}
+
+static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
+{
+	return initial_apicid >> index_msb;
+}
+
+static void x2apic_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+#endif /* _ASM_X86_X2APIC_H */
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_cluster.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
@@ -8,8 +8,7 @@
 #include <linux/cpu.h>
 
 #include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
+#include <asm/x2apic.h>
 
 static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 static DEFINE_PER_CPU(cpumask_var_t, cpus_in_cluster);
@@ -20,37 +19,6 @@ static int x2apic_acpi_madt_oem_check(ch
 	return x2apic_enabled();
 }
 
-/*
- * need to use more than cpu 0, because we need more vectors when
- * MSI-X are used.
- */
-static const struct cpumask *x2apic_target_cpus(void)
-{
-	return cpu_online_mask;
-}
-
-/*
- * for now each logical cpu is in its own vector allocation domain.
- */
-static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	cpumask_clear(retmask);
-	cpumask_set_cpu(cpu, retmask);
-}
-
-static void
- __x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest)
-{
-	unsigned long cfg;
-
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * send the IPI.
-	 */
-	native_x2apic_icr_write(cfg, apicid);
-}
-
 static inline u32 x2apic_cluster(int cpu)
 {
 	return per_cpu(x86_cpu_to_logical_apicid, cpu) >> 16;
@@ -128,11 +96,6 @@ static void x2apic_send_IPI_all(int vect
 	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
 }
 
-static int x2apic_apic_id_registered(void)
-{
-	return 1;
-}
-
 static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
 	/*
@@ -165,32 +128,6 @@ x2apic_cpu_mask_to_apicid_and(const stru
 	return per_cpu(x86_cpu_to_logical_apicid, cpu);
 }
 
-static unsigned int x2apic_cluster_phys_get_apic_id(unsigned long x)
-{
-	unsigned int id;
-
-	id = x;
-	return id;
-}
-
-static unsigned long set_apic_id(unsigned int id)
-{
-	unsigned long x;
-
-	x = id;
-	return x;
-}
-
-static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
-{
-	return initial_apicid >> index_msb;
-}
-
-static void x2apic_send_IPI_self(int vector)
-{
-	apic_write(APIC_SELF_IPI, vector);
-}
-
 static void init_x2apic_ldr(void)
 {
 	unsigned int this_cpu = smp_processor_id();
@@ -298,11 +235,11 @@ struct apic apic_x2apic_cluster = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= x2apic_cluster_phys_pkg_id,
+	.phys_pkg_id			= x2apic_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= x2apic_cluster_phys_get_apic_id,
-	.set_apic_id			= set_apic_id,
+	.get_apic_id			= x2apic_get_apic_id,
+	.set_apic_id			= x2apic_set_apic_id,
 	.apic_id_mask			= 0xFFFFFFFFu,
 
 	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_phys.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_phys.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_phys.c
@@ -7,8 +7,7 @@
 #include <linux/dmar.h>
 
 #include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
+#include <asm/x2apic.h>
 
 int x2apic_phys;
 
@@ -27,34 +26,6 @@ static int x2apic_acpi_madt_oem_check(ch
 		return 0;
 }
 
-/*
- * need to use more than cpu 0, because we need more vectors when
- * MSI-X are used.
- */
-static const struct cpumask *x2apic_target_cpus(void)
-{
-	return cpu_online_mask;
-}
-
-static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	cpumask_clear(retmask);
-	cpumask_set_cpu(cpu, retmask);
-}
-
-static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
-				   unsigned int dest)
-{
-	unsigned long cfg;
-
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * send the IPI.
-	 */
-	native_x2apic_icr_write(cfg, apicid);
-}
-
 static void
 __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
@@ -97,11 +68,6 @@ static void x2apic_send_IPI_all(int vect
 	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
 }
 
-static int x2apic_apic_id_registered(void)
-{
-	return 1;
-}
-
 static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
 	/*
@@ -134,26 +100,6 @@ x2apic_cpu_mask_to_apicid_and(const stru
 	return per_cpu(x86_cpu_to_apicid, cpu);
 }
 
-static unsigned int x2apic_phys_get_apic_id(unsigned long x)
-{
-	return x;
-}
-
-static unsigned long set_apic_id(unsigned int id)
-{
-	return id;
-}
-
-static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
-{
-	return initial_apicid >> index_msb;
-}
-
-static void x2apic_send_IPI_self(int vector)
-{
-	apic_write(APIC_SELF_IPI, vector);
-}
-
 static void init_x2apic_ldr(void)
 {
 }
@@ -196,8 +142,8 @@ struct apic apic_x2apic_phys = {
 	.phys_pkg_id			= x2apic_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= x2apic_phys_get_apic_id,
-	.set_apic_id			= set_apic_id,
+	.get_apic_id			= x2apic_get_apic_id,
+	.set_apic_id			= x2apic_set_apic_id,
 	.apic_id_mask			= 0xFFFFFFFFu,
 
 	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,

[patch 6/6] x86, apic: use .apicdrivers section to find the list of apic drivers

[Suresh Siddha]

[-- Attachment #1: use_apicdrivers_section.patch --]
[-- Type: text/plain, Size: 16742 bytes --]

This will enable each apic driver to be self-contained and eliminate the need
for apic_probe[].

Apic probe will now depend on the order in which apic drivers are listed in
the .apicdrivers section. Ordering of apic driver files in the Makefile
and the macros apic_driver()/apic_drivers() help enforce the desired order.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/include/asm/apic.h           |   25 ++++++++++---
 arch/x86/kernel/apic/Makefile         |   17 +++++---
 arch/x86/kernel/apic/apic_flat_64.c   |   11 ++++-
 arch/x86/kernel/apic/bigsmp_32.c      |    2 +
 arch/x86/kernel/apic/es7000_32.c      |    9 +++-
 arch/x86/kernel/apic/numaq_32.c       |    7 ++-
 arch/x86/kernel/apic/probe_32.c       |   65 ++++++++++++----------------------
 arch/x86/kernel/apic/probe_64.c       |   43 ++++++----------------
 arch/x86/kernel/apic/summit_32.c      |    4 +-
 arch/x86/kernel/apic/x2apic_cluster.c |    4 +-
 arch/x86/kernel/apic/x2apic_phys.c    |    6 ++-
 arch/x86/kernel/apic/x2apic_uv_x.c    |    6 ++-
 arch/x86/kernel/vmlinux.lds.S         |    6 +++
 13 files changed, 111 insertions(+), 94 deletions(-)

Index: linux-2.6-tip/arch/x86/include/asm/apic.h
===================================================================
--- linux-2.6-tip.orig/arch/x86/include/asm/apic.h
+++ linux-2.6-tip/arch/x86/include/asm/apic.h
@@ -381,6 +381,26 @@ struct apic {
 extern struct apic *apic;
 
 /*
+ * APIC drivers are probed based on how they are listed in the .apicdrivers
+ * section. So the order is important and enforced by the ordering
+ * of different apic driver files in the Makefile.
+ *
+ * For the files having two apic drivers, we use apic_drivers()
+ * to enforce the order with in them.
+ */
+#define apic_driver(sym)					\
+	static struct apic *__apicdrivers_##sym __used		\
+	__aligned(sizeof(struct apic *))			\
+	__section(.apicdrivers) = { &sym }
+
+#define apic_drivers(sym1, sym2)					\
+	static struct apic *__apicdrivers_##sym1##sym2[2] __used	\
+	__aligned(sizeof(struct apic *))				\
+	__section(.apicdrivers) = { &sym1, &sym2 }
+
+extern struct apic *__apicdrivers[], *__apicdrivers_end[];
+
+/*
  * APIC functionality to boot other CPUs - only used on SMP:
  */
 #ifdef CONFIG_SMP
@@ -458,15 +478,10 @@ static inline unsigned default_get_apic_
 #define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469
 
 #ifdef CONFIG_X86_64
-extern struct apic apic_flat;
-extern struct apic apic_physflat;
-extern struct apic apic_x2apic_cluster;
-extern struct apic apic_x2apic_phys;
 extern int default_acpi_madt_oem_check(char *, char *);
 
 extern void apic_send_IPI_self(int vector);
 
-extern struct apic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 
 extern int default_cpu_present_to_apicid(int mps_cpu);
Index: linux-2.6-tip/arch/x86/kernel/apic/Makefile
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/Makefile
+++ linux-2.6-tip/arch/x86/kernel/apic/Makefile
@@ -2,20 +2,25 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o ipi.o
 obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
 
 ifeq ($(CONFIG_X86_64),y)
-obj-y				+= apic_flat_64.o
-obj-$(CONFIG_X86_X2APIC)	+= x2apic_cluster.o
-obj-$(CONFIG_X86_X2APIC)	+= x2apic_phys.o
+# APIC probe will depend on the listing order here
 obj-$(CONFIG_X86_UV)		+= x2apic_uv_x.o
+obj-$(CONFIG_X86_X2APIC)	+= x2apic_phys.o
+obj-$(CONFIG_X86_X2APIC)	+= x2apic_cluster.o
+obj-y				+= apic_flat_64.o
 endif
 
-obj-$(CONFIG_X86_BIGSMP)	+= bigsmp_32.o
+# APIC probe will depend on the listing order here
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
-obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
 obj-$(CONFIG_X86_SUMMIT)	+= summit_32.o
+obj-$(CONFIG_X86_BIGSMP)	+= bigsmp_32.o
+obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
+
+# For 32bit, probe_32 need to be listed last
+obj-$(CONFIG_X86_LOCAL_APIC)	+= probe_$(BITS).o
Index: linux-2.6-tip/arch/x86/kernel/apic/apic_flat_64.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/apic_flat_64.c
+++ linux-2.6-tip/arch/x86/kernel/apic/apic_flat_64.c
@@ -24,6 +24,8 @@
 #include <acpi/acpi_bus.h>
 #endif
 
+static struct apic apic_physflat;
+
 static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	return 1;
@@ -164,7 +166,7 @@ static int flat_phys_pkg_id(int initial_
 	return initial_apic_id >> index_msb;
 }
 
-struct apic apic_flat =  {
+static struct apic apic_flat =  {
 	.name				= "flat",
 	.probe				= NULL,
 	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
@@ -320,7 +322,7 @@ static int physflat_probe(void)
 	return 0;
 }
 
-struct apic apic_physflat =  {
+static struct apic apic_physflat =  {
 
 	.name				= "physical flat",
 	.probe				= physflat_probe,
@@ -377,3 +379,8 @@ struct apic apic_physflat =  {
 	.wait_icr_idle			= native_apic_wait_icr_idle,
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
+
+/*
+ * We need to check for physflat first, so this order is important.
+ */
+apic_drivers(apic_physflat, apic_flat);
Index: linux-2.6-tip/arch/x86/kernel/apic/probe_64.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/probe_64.c
+++ linux-2.6-tip/arch/x86/kernel/apic/probe_64.c
@@ -23,27 +23,9 @@
 #include <asm/ipi.h>
 #include <asm/setup.h>
 
-extern struct apic apic_flat;
-extern struct apic apic_physflat;
-extern struct apic apic_x2xpic_uv_x;
-extern struct apic apic_x2apic_phys;
-extern struct apic apic_x2apic_cluster;
-
-struct apic __read_mostly *apic = &apic_flat;
+struct apic __read_mostly *apic;
 EXPORT_SYMBOL_GPL(apic);
 
-static struct apic *apic_probe[] __initdata = {
-#ifdef CONFIG_X86_UV
-	&apic_x2apic_uv_x,
-#endif
-#ifdef CONFIG_X86_X2APIC
-	&apic_x2apic_phys,
-	&apic_x2apic_cluster,
-#endif
-	&apic_physflat,
-	NULL,
-};
-
 static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
 {
 	return hard_smp_processor_id() >> index_msb;
@@ -54,19 +36,19 @@ static int apicid_phys_pkg_id(int initia
  */
 void __init default_setup_apic_routing(void)
 {
-	int i;
+	struct apic **drv;
 
 	enable_IR_x2apic();
 
-	for (i = 0; apic_probe[i]; ++i) {
-		if (apic_probe[i]->probe()) {
-			apic = apic_probe[i];
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if ((*drv)->probe()) {
+			apic = *drv;
+			printk(KERN_INFO "APIC routing finalized to %s.\n",
+			       apic->name);
 			break;
 		}
 	}
 
-	printk(KERN_INFO "APIC routing finalized to %s.\n", apic->name);
-
 	if (is_vsmp_box()) {
 		/* need to update phys_pkg_id */
 		apic->phys_pkg_id = apicid_phys_pkg_id;
@@ -82,13 +64,14 @@ void apic_send_IPI_self(int vector)
 
 int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int i;
+	struct apic **drv;
 
-	for (i = 0; apic_probe[i]; ++i) {
-		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
-			apic = apic_probe[i];
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if ((*drv)->acpi_madt_oem_check(oem_id, oem_table_id)) {
+			apic = *drv;
 			printk(KERN_INFO "Setting APIC routing to %s.\n",
-				apic->name);
+			       apic->name);
+
 			return 1;
 		}
 	}
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_cluster.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_cluster.c
@@ -208,7 +208,7 @@ static int x2apic_cluster_probe(void)
 		return 0;
 }
 
-struct apic apic_x2apic_cluster = {
+static struct apic apic_x2apic_cluster = {
 
 	.name				= "cluster x2apic",
 	.probe				= x2apic_cluster_probe,
@@ -264,3 +264,5 @@ struct apic apic_x2apic_cluster = {
 	.wait_icr_idle			= native_x2apic_wait_icr_idle,
 	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
 };
+
+apic_driver(apic_x2apic_cluster);
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_phys.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_phys.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_phys.c
@@ -11,6 +11,8 @@
 
 int x2apic_phys;
 
+static struct apic apic_x2apic_phys;
+
 static int set_x2apic_phys_mode(char *arg)
 {
 	x2apic_phys = 1;
@@ -112,7 +114,7 @@ static int x2apic_phys_probe(void)
 	return apic == &apic_x2apic_phys;
 }
 
-struct apic apic_x2apic_phys = {
+static struct apic apic_x2apic_phys = {
 
 	.name				= "physical x2apic",
 	.probe				= x2apic_phys_probe,
@@ -168,3 +170,5 @@ struct apic apic_x2apic_phys = {
 	.wait_icr_idle			= native_x2apic_wait_icr_idle,
 	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
 };
+
+apic_driver(apic_x2apic_phys);
Index: linux-2.6-tip/arch/x86/kernel/apic/x2apic_uv_x.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux-2.6-tip/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -58,6 +58,8 @@ unsigned int uv_apicid_hibits;
 EXPORT_SYMBOL_GPL(uv_apicid_hibits);
 static DEFINE_SPINLOCK(uv_nmi_lock);
 
+static struct apic apic_x2apic_uv_x;
+
 static unsigned long __init uv_early_read_mmr(unsigned long addr)
 {
 	unsigned long val, *mmr;
@@ -331,7 +333,7 @@ static int uv_probe(void)
 	return apic == &apic_x2apic_uv_x;
 }
 
-struct apic __refdata apic_x2apic_uv_x = {
+static struct apic apic_x2apic_uv_x = {
 
 	.name				= "UV large system",
 	.probe				= uv_probe,
@@ -864,3 +866,5 @@ void __init uv_system_init(void)
 	if (is_kdump_kernel())
 		reboot_type = BOOT_ACPI;
 }
+
+apic_driver(apic_x2apic_uv_x);
Index: linux-2.6-tip/arch/x86/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/vmlinux.lds.S
+++ linux-2.6-tip/arch/x86/kernel/vmlinux.lds.S
@@ -305,6 +305,12 @@ SECTIONS
 		__iommu_table_end = .;
 	}
 
+	.apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
+		__apicdrivers = .;
+		*(.apicdrivers);
+		__apicdrivers_end = .;
+	}
+
 	. = ALIGN(8);
 	/*
 	 * .exit.text is discard at runtime, not link time, to deal with
Index: linux-2.6-tip/arch/x86/kernel/apic/bigsmp_32.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/bigsmp_32.c
+++ linux-2.6-tip/arch/x86/kernel/apic/bigsmp_32.c
@@ -254,3 +254,5 @@ struct apic apic_bigsmp = {
 
 	.x86_32_early_logical_apicid	= bigsmp_early_logical_apicid,
 };
+
+apic_driver(apic_bigsmp);
Index: linux-2.6-tip/arch/x86/kernel/apic/es7000_32.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/es7000_32.c
+++ linux-2.6-tip/arch/x86/kernel/apic/es7000_32.c
@@ -620,7 +620,7 @@ static int es7000_mps_oem_check_cluster(
 }
 
 /* We've been warned by a false positive warning.Use __refdata to keep calm. */
-struct apic __refdata apic_es7000_cluster = {
+static struct apic __refdata apic_es7000_cluster = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,
@@ -685,7 +685,7 @@ struct apic __refdata apic_es7000_cluste
 	.x86_32_early_logical_apicid	= es7000_early_logical_apicid,
 };
 
-struct apic __refdata apic_es7000 = {
+static struct apic __refdata apic_es7000 = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,
@@ -747,3 +747,9 @@ struct apic __refdata apic_es7000 = {
 
 	.x86_32_early_logical_apicid	= es7000_early_logical_apicid,
 };
+
+/*
+ * Need to check for es7000 followed by es7000_cluster, so this order
+ * in apic_drivers is important.
+ */
+apic_drivers(apic_es7000, apic_es7000_cluster);
Index: linux-2.6-tip/arch/x86/kernel/apic/numaq_32.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/numaq_32.c
+++ linux-2.6-tip/arch/x86/kernel/apic/numaq_32.c
@@ -73,7 +73,6 @@ int					mp_bus_id_to_node[MAX_MP_BUSSES]
 int					mp_bus_id_to_local[MAX_MP_BUSSES];
 int					quad_local_to_mp_bus_id[NR_CPUS/4][4];
 
-
 static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
 {
 	struct eachquadmem *eq = scd->eq + node;
@@ -472,8 +471,8 @@ static void numaq_setup_portio_remap(voi
 		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
 }
 
-/* Use __refdata to keep false positive warning calm.	*/
-struct apic __refdata apic_numaq = {
+/* Use __refdata to keep false positive warning calm.  */
+static struct apic __refdata apic_numaq = {
 
 	.name				= "NUMAQ",
 	.probe				= probe_numaq,
@@ -537,3 +536,5 @@ struct apic __refdata apic_numaq = {
 	.x86_32_early_logical_apicid	= noop_x86_32_early_logical_apicid,
 	.x86_32_numa_cpu_node		= numaq_numa_cpu_node,
 };
+
+apic_driver(apic_numaq);
Index: linux-2.6-tip/arch/x86/kernel/apic/probe_32.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/probe_32.c
+++ linux-2.6-tip/arch/x86/kernel/apic/probe_32.c
@@ -174,44 +174,22 @@ struct apic apic_default = {
 	.x86_32_early_logical_apicid	= default_x86_32_early_logical_apicid,
 };
 
-extern struct apic apic_numaq;
-extern struct apic apic_summit;
-extern struct apic apic_bigsmp;
-extern struct apic apic_es7000;
-extern struct apic apic_es7000_cluster;
+apic_driver(apic_default);
 
 struct apic *apic = &apic_default;
 EXPORT_SYMBOL_GPL(apic);
 
-static struct apic *apic_probe[] __initdata = {
-#ifdef CONFIG_X86_NUMAQ
-	&apic_numaq,
-#endif
-#ifdef CONFIG_X86_SUMMIT
-	&apic_summit,
-#endif
-#ifdef CONFIG_X86_BIGSMP
-	&apic_bigsmp,
-#endif
-#ifdef CONFIG_X86_ES7000
-	&apic_es7000,
-	&apic_es7000_cluster,
-#endif
-	&apic_default,	/* must be last */
-	NULL,
-};
-
 static int cmdline_apic __initdata;
 static int __init parse_apic(char *arg)
 {
-	int i;
+	struct apic **drv;
 
 	if (!arg)
 		return -EINVAL;
 
-	for (i = 0; apic_probe[i]; i++) {
-		if (!strcmp(apic_probe[i]->name, arg)) {
-			apic = apic_probe[i];
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if (!strcmp((*drv)->name, arg)) {
+			apic = *drv;
 			cmdline_apic = 1;
 			return 0;
 		}
@@ -222,6 +200,8 @@ static int __init parse_apic(char *arg)
 }
 early_param("apic", parse_apic);
 
+extern struct apic apic_bigsmp;
+
 void __init generic_bigsmp_probe(void)
 {
 #ifdef CONFIG_X86_BIGSMP
@@ -245,15 +225,16 @@ void __init generic_bigsmp_probe(void)
 void __init generic_apic_probe(void)
 {
 	if (!cmdline_apic) {
-		int i;
-		for (i = 0; apic_probe[i]; i++) {
-			if (apic_probe[i]->probe()) {
-				apic = apic_probe[i];
+		struct apic **drv;
+
+		for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+			if ((*drv)->probe()) {
+				apic = *drv;
 				break;
 			}
 		}
 		/* Not visible without early console */
-		if (!apic_probe[i])
+		if (drv == __apicdrivers_end)
 			panic("Didn't find an APIC driver");
 	}
 	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
@@ -264,16 +245,16 @@ void __init generic_apic_probe(void)
 int __init
 generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
-	int i;
+	struct apic **drv;
 
-	for (i = 0; apic_probe[i]; ++i) {
-		if (!apic_probe[i]->mps_oem_check)
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if (!((*drv)->mps_oem_check))
 			continue;
-		if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
+		if (!(*drv)->mps_oem_check(mpc, oem, productid))
 			continue;
 
 		if (!cmdline_apic) {
-			apic = apic_probe[i];
+			apic = *drv;
 			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 			       apic->name);
 		}
@@ -284,16 +265,16 @@ generic_mps_oem_check(struct mpc_table *
 
 int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int i;
+	struct apic **drv;
 
-	for (i = 0; apic_probe[i]; ++i) {
-		if (!apic_probe[i]->acpi_madt_oem_check)
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if (!(*drv)->acpi_madt_oem_check)
 			continue;
-		if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
+		if (!(*drv)->acpi_madt_oem_check(oem_id, oem_table_id))
 			continue;
 
 		if (!cmdline_apic) {
-			apic = apic_probe[i];
+			apic = *drv;
 			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 			       apic->name);
 		}
Index: linux-2.6-tip/arch/x86/kernel/apic/summit_32.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/summit_32.c
+++ linux-2.6-tip/arch/x86/kernel/apic/summit_32.c
@@ -491,7 +491,7 @@ void setup_summit(void)
 }
 #endif
 
-struct apic apic_summit = {
+static struct apic apic_summit = {
 
 	.name				= "summit",
 	.probe				= probe_summit,
@@ -552,3 +552,5 @@ struct apic apic_summit = {
 
 	.x86_32_early_logical_apicid	= summit_early_logical_apicid,
 };
+
+apic_driver(apic_summit);

Re: [patch 6/6] x86, apic: use .apicdrivers section to find the list of apic drivers

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 1785 bytes --]


* Suresh Siddha <suresh.b.siddha@intel.com> wrote:

> This will enable each apic driver to be self-contained and eliminate the need
> for apic_probe[].
> 
> Apic probe will now depend on the order in which apic drivers are listed in
> the .apicdrivers section. Ordering of apic driver files in the Makefile
> and the macros apic_driver()/apic_drivers() help enforce the desired order.
> 
> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
> ---
>  arch/x86/include/asm/apic.h           |   25 ++++++++++---
>  arch/x86/kernel/apic/Makefile         |   17 +++++---
>  arch/x86/kernel/apic/apic_flat_64.c   |   11 ++++-
>  arch/x86/kernel/apic/bigsmp_32.c      |    2 +
>  arch/x86/kernel/apic/es7000_32.c      |    9 +++-
>  arch/x86/kernel/apic/numaq_32.c       |    7 ++-
>  arch/x86/kernel/apic/probe_32.c       |   65 ++++++++++++----------------------
>  arch/x86/kernel/apic/probe_64.c       |   43 ++++++----------------
>  arch/x86/kernel/apic/summit_32.c      |    4 +-
>  arch/x86/kernel/apic/x2apic_cluster.c |    4 +-
>  arch/x86/kernel/apic/x2apic_phys.c    |    6 ++-
>  arch/x86/kernel/apic/x2apic_uv_x.c    |    6 ++-
>  arch/x86/kernel/vmlinux.lds.S         |    6 +++
>  13 files changed, 111 insertions(+), 94 deletions(-)

This patch crashes one of my testboxes (AMD X2 whitebox, config attached). No 
crashlog.

The patch is also clearly too large and should be split up into 4 pieces:

 - there should be a patch adding the whole driver section thing and marking 
   all the existing APIC drivers with it

 - one patch adding the functions doing the new-style probing.

 - one patch flipping over from old-style to new-style probing

 - a final patch removing all the stale functions and marking the APIC driver
   probe functions static.

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 67304 bytes --]

#
# Automatically generated make config: don't edit
# Linux/x86_64 2.6.39 Kernel Configuration
# Fri May 20 16:18:10 2011
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
# CONFIG_BOOTPARAM_SUPPORT is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not set
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_TREE_RCU_TRACE=y
# CONFIG_RCU_BOOST is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SCHED_TTWU_QUEUE=y
CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_VSMP=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
# CONFIG_KVM_CLOCK is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=12
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
# CONFIG_X86_64_ACPI_NUMA is not set
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=m
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=m
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=m
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=m
# CONFIG_HT_IRQ is not set
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=m
CONFIG_IEEE802154=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=m
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not set
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
# CONFIG_WINBOND_FIR is not set
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIBTSDIO=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set
CONFIG_CEPH_LIB=m
CONFIG_CEPH_LIB_PRETTYDEBUG=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_DRBD=m
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=m
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=m
CONFIG_PCH_PHUB=m
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=m
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=m
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=m
CONFIG_IWMC3200TOP_DEBUG=y
# CONFIG_IWMC3200TOP_DEBUGFS is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_ISCSI_BOOT_SYSFS is not set
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_VMWARE_PVSCSI=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_FCOE is not set
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=m
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_BFA_FC=m
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARASAN_CF is not set
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CS5536=m
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
# CONFIG_PATA_HPT366 is not set
CONFIG_PATA_HPT37X=m
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=m
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
# CONFIG_PATA_SIS is not set
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
# CONFIG_PATA_NS87410 is not set
CONFIG_PATA_OPTI=m
CONFIG_PATA_RZ1000=m

#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_RAID is not set
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_FIREWIRE_NET is not set
CONFIG_FIREWIRE_NOSY=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
CONFIG_MACVLAN=m
# CONFIG_MACVTAP is not set
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM63XX_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_VORTEX=y
CONFIG_ENC28J60=m
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ETHOC=m
CONFIG_DNET=m
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_KSZ884X_PCI is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_E100=y
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
CONFIG_DE600=m
# CONFIG_DE620 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=m
CONFIG_IGBVF=m
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
# CONFIG_R8169 is not set
CONFIG_SIS190=m
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=m
CONFIG_CNIC=m
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=m
# CONFIG_ATL1E is not set
CONFIG_ATL1C=m
# CONFIG_JME is not set
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_ENIC=m
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
CONFIG_QLGE=m
# CONFIG_BNA is not set
CONFIG_SFC=m
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
# CONFIG_WIMAX_I2400M_USB is not set
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
CONFIG_USB_NET_INT51X1=m
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_USB_SIERRA_NET=m
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
# CONFIG_CAIF_SPI_SLAVE is not set
CONFIG_FDDI=m
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
# CONFIG_ROADRUNNER is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
# CONFIG_ISDN_PPP_VJ is not set
# CONFIG_ISDN_MPP is not set
# CONFIG_IPPP_FILTER is not set
CONFIG_ISDN_PPP_BSDCOMP=m
# CONFIG_ISDN_AUDIO is not set
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set

#
# Active cards
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set
# CONFIG_CAPI_EICON is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_HANWANG=m
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
# CONFIG_SYNCLINKMP is not set
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_DEVKMEM is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX3107=m
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_TIMBERDALE=m
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_IFX6X60=m
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_R3964=m
CONFIG_APPLICOM=m
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_INTEL_MID=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
CONFIG_I2C_EG20T=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
CONFIG_SPI_XILINX=m
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m

#
# PPS support
#
CONFIG_PPS=m
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m

#
# PPS generators support
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_BASIC_MMIO is not set
CONFIG_GPIO_IT8761E=m
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_VX855=m

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_ADP5588=m

#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=m
CONFIG_GPIO_BT8XX=m
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_PCH=m
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_RDC321X=m

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
CONFIG_GPIO_74X164=m

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=m
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_BQ20Z75=m
CONFIG_BATTERY_BQ27x00=m
# CONFIG_BATTERY_BQ27X00_I2C is not set
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=m
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_GPIO=m
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
CONFIG_CPU5_WDT=m
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=m
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=m
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_PCF50633=m
# CONFIG_MFD_MC13XXX is not set
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_ABX500_CORE=y
# CONFIG_EZX_PCAP is not set
# CONFIG_AB8500_CORE is not set
CONFIG_MFD_CS5535=m
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_VX855=m
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8400=m
# CONFIG_REGULATOR_PCF50633 is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_TPS6524X=m
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_RC_CORE=m
CONFIG_LIRC=m
# CONFIG_RC_MAP is not set
CONFIG_IR_NEC_DECODER=m
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_ENE=m
CONFIG_IR_IMON=m
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_ITE_CIR=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_STREAMZAP=m
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMISE=y

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
CONFIG_MEDIA_TUNER_TDA18271=m
# CONFIG_MEDIA_TUNER_TDA9887 is not set
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
# CONFIG_MEDIA_TUNER_XC5000 is not set
CONFIG_MEDIA_TUNER_MXL5005S=m
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
# CONFIG_DVB_TTUSB_DEC is not set
CONFIG_SMS_SIANO_MDTV=m

#
# Siano module components
#
# CONFIG_SMS_USB_DRV is not set
CONFIG_SMS_SDIO_DRV=m

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y

#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set

#
# Supported Mantis Adapters
#
# CONFIG_MANTIS_CORE is not set

#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=m

#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_CX22700=m
CONFIG_DVB_TDA1004X=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_LGDT330X=m

#
# ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
CONFIG_STUB_POULSBO=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
CONFIG_FB_BIG_ENDIAN=y
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=m
# CONFIG_FB_CYBER2000_DDC is not set
CONFIG_FB_ARC=m
# CONFIG_FB_UVESA is not set
CONFIG_FB_N411=m
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_ATY128=m
# CONFIG_FB_ATY128_BACKLIGHT is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=m
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
# CONFIG_FB_GEODE_GX is not set
# CONFIG_FB_GEODE_GX1 is not set
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
# CONFIG_FB_UDL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_SAHARA=m
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_PCF50633 is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=m
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=m
CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_NFC_DEVICES=y
CONFIG_PN544_NFC=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
CONFIG_TIMB_DMA=m
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_SIGMA=m
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_PSTORE=y
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_LKDTM=m
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_TEST_KSTRTOX=m
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DEBUG_NX_TEST=m
CONFIG_IOMMU_DEBUG=y
# CONFIG_IOMMU_STRESS is not set
# CONFIG_IOMMU_LEAK is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP2=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_FPU=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_64=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y

[tip:x86/apic] x86, apic: Use probe routines to simplify apic selection

[tip-bot for Suresh Siddha]

Commit-ID:  9ebd680bd029a9fc47399ca61c950f8b6730ac40
Gitweb:     http://git.kernel.org/tip/9ebd680bd029a9fc47399ca61c950f8b6730ac40
Author:     Suresh Siddha <suresh.b.siddha@intel.com>
AuthorDate: Thu, 19 May 2011 16:45:46 -0700
Committer:  Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 20 May 2011 13:41:04 +0200

x86, apic: Use probe routines to simplify apic selection

Use the unused probe routine in the apic driver to finalize the
apic model selection. This cleans up the
default_setup_apic_routing() and this probe routine in future
can also be used for doing any apic model specific
initialisation.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic_flat_64.c   |   10 +++++++++-
 arch/x86/kernel/apic/probe_64.c       |   22 +++++++---------------
 arch/x86/kernel/apic/x2apic_cluster.c |    7 ++++++-
 arch/x86/kernel/apic/x2apic_phys.c    |   10 +++++++++-
 arch/x86/kernel/apic/x2apic_uv_x.c    |    7 ++++++-
 5 files changed, 37 insertions(+), 19 deletions(-)

diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 5652d31..025921f 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -312,10 +312,18 @@ physflat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return per_cpu(x86_cpu_to_apicid, cpu);
 }
 
+static int physflat_probe(void)
+{
+	if (apic == &apic_physflat || num_possible_cpus() > 8)
+		return 1;
+
+	return 0;
+}
+
 struct apic apic_physflat =  {
 
 	.name				= "physical flat",
-	.probe				= NULL,
+	.probe				= physflat_probe,
 	.acpi_madt_oem_check		= physflat_acpi_madt_oem_check,
 	.apic_id_registered		= flat_apic_id_registered,
 
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index d8c4a6f..39fb42b 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -54,26 +54,18 @@ static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
  */
 void __init default_setup_apic_routing(void)
 {
+	int i;
 
 	enable_IR_x2apic();
 
-#ifdef CONFIG_X86_X2APIC
-	if (x2apic_mode
-#ifdef CONFIG_X86_UV
-		       && apic != &apic_x2apic_uv_x
-#endif
-		       ) {
-		if (x2apic_phys)
-			apic = &apic_x2apic_phys;
-		else
-			apic = &apic_x2apic_cluster;
+	for (i = 0; apic_probe[i]; ++i) {
+		if (apic_probe[i]->probe()) {
+			apic = apic_probe[i];
+			break;
+		}
 	}
-#endif
-
-	if (apic == &apic_flat && num_possible_cpus() > 8)
-			apic = &apic_physflat;
 
-	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
+	printk(KERN_INFO "APIC routing finalized to %s.\n", apic->name);
 
 	if (is_vsmp_box()) {
 		/* need to update phys_pkg_id */
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 90949bb..2967bab 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -184,10 +184,15 @@ static void init_x2apic_ldr(void)
 	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
 }
 
+static int x2apic_cluster_probe(void)
+{
+	return x2apic_mode;
+}
+
 struct apic apic_x2apic_cluster = {
 
 	.name				= "cluster x2apic",
-	.probe				= NULL,
+	.probe				= x2apic_cluster_probe,
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
 	.apic_id_registered		= x2apic_apic_id_registered,
 
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index c7e6d66..8f21771 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -173,10 +173,18 @@ static void init_x2apic_ldr(void)
 {
 }
 
+static int x2apic_phys_probe(void)
+{
+	if (x2apic_mode && x2apic_phys)
+		return 1;
+
+	return apic == &apic_x2apic_phys;
+}
+
 struct apic apic_x2apic_phys = {
 
 	.name				= "physical x2apic",
-	.probe				= NULL,
+	.probe				= x2apic_phys_probe,
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
 	.apic_id_registered		= x2apic_apic_id_registered,
 
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 7acd2d2..6bb80b1 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -326,10 +326,15 @@ static void uv_send_IPI_self(int vector)
 	apic_write(APIC_SELF_IPI, vector);
 }
 
+static int uv_probe(void)
+{
+	return apic == &apic_x2apic_uv_x;
+}
+
 struct apic __refdata apic_x2apic_uv_x = {
 
 	.name				= "UV large system",
-	.probe				= NULL,
+	.probe				= uv_probe,
 	.acpi_madt_oem_check		= uv_acpi_madt_oem_check,
 	.apic_id_registered		= uv_apic_id_registered,
 

[tip:x86/apic] x86, x2apic: Remove duplicate code for IPI mask routines

[tip-bot for Suresh Siddha]

Commit-ID:  a27d0b5e7d913b38880678ac05690f1dc737c4fd
Gitweb:     http://git.kernel.org/tip/a27d0b5e7d913b38880678ac05690f1dc737c4fd
Author:     Suresh Siddha <suresh.b.siddha@intel.com>
AuthorDate: Thu, 19 May 2011 16:45:47 -0700
Committer:  Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 20 May 2011 13:41:06 +0200

x86, x2apic: Remove duplicate code for IPI mask routines

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.337024125@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_cluster.c |   48 +++++++++++----------------------
 arch/x86/kernel/apic/x2apic_phys.c    |   45 ++++++++++--------------------
 2 files changed, 31 insertions(+), 62 deletions(-)

diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 2967bab..b261799 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -54,64 +54,48 @@ static void
  * at once. We have 16 cpu's in a cluster. This will minimize IPI register
  * writes.
  */
-static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+static void
+__x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
 	unsigned long query_cpu;
+	unsigned long this_cpu;
 	unsigned long flags;
 
 	x2apic_wrmsr_fence();
 
 	local_irq_save(flags);
+
+	this_cpu = smp_processor_id();
 	for_each_cpu(query_cpu, mask) {
+		if (apic_dest == APIC_DEST_ALLBUT && query_cpu == this_cpu)
+			continue;
 		__x2apic_send_IPI_dest(
 			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
 			vector, apic->dest_logical);
 	}
+
 	local_irq_restore(flags);
 }
 
+static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLINC);
+}
+
 static void
  x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	x2apic_wrmsr_fence();
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, apic->dest_logical);
-	}
-	local_irq_restore(flags);
+	__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLBUT);
 }
 
 static void x2apic_send_IPI_allbutself(int vector)
 {
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	x2apic_wrmsr_fence();
-
-	local_irq_save(flags);
-	for_each_online_cpu(query_cpu) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, apic->dest_logical);
-	}
-	local_irq_restore(flags);
+	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLBUT);
 }
 
 static void x2apic_send_IPI_all(int vector)
 {
-	x2apic_send_IPI_mask(cpu_online_mask, vector);
+	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
 }
 
 static int x2apic_apic_id_registered(void)
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 8f21771..6ef49e3 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -55,61 +55,46 @@ static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
 	native_x2apic_icr_write(cfg, apicid);
 }
 
-static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+static void
+__x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
 	unsigned long query_cpu;
+	unsigned long this_cpu;
 	unsigned long flags;
 
 	x2apic_wrmsr_fence();
 
 	local_irq_save(flags);
+
+	this_cpu = smp_processor_id();
 	for_each_cpu(query_cpu, mask) {
+		if (apic_dest == APIC_DEST_ALLBUT && this_cpu == query_cpu)
+			continue;
 		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
 				       vector, APIC_DEST_PHYSICAL);
 	}
 	local_irq_restore(flags);
 }
 
+static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLINC);
+}
+
 static void
  x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	x2apic_wrmsr_fence();
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu != this_cpu)
-			__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_apicid, query_cpu),
-				vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
+	__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLBUT);
 }
 
 static void x2apic_send_IPI_allbutself(int vector)
 {
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	x2apic_wrmsr_fence();
-
-	local_irq_save(flags);
-	for_each_online_cpu(query_cpu) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
-				       vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
+	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLBUT);
 }
 
 static void x2apic_send_IPI_all(int vector)
 {
-	x2apic_send_IPI_mask(cpu_online_mask, vector);
+	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
 }
 
 static int x2apic_apic_id_registered(void)

[tip:x86/apic] x86, x2apic: Track the x2apic cluster sibling map

[tip-bot for Cyrill Gorcunov]

Commit-ID:  a39d1f3f67f6a3d72b24f0d8bf9a295a27ea448e
Gitweb:     http://git.kernel.org/tip/a39d1f3f67f6a3d72b24f0d8bf9a295a27ea448e
Author:     Cyrill Gorcunov <gorcunov@openvz.org>
AuthorDate: Thu, 19 May 2011 16:45:48 -0700
Committer:  Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 20 May 2011 13:41:08 +0200

x86, x2apic: Track the x2apic cluster sibling map

In the case of x2apic cluster mode, we can group IPI register
writes based on the cluster group instead of individual per-cpu
destination messages.

For this purpose, track the cpu's that belong to the same x2apic
cluster.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.421800999@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_cluster.c |   72 ++++++++++++++++++++++++++++++++-
 1 files changed, 70 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index b261799..4b2bb13 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -11,6 +11,7 @@
 #include <asm/ipi.h>
 
 static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
+static DEFINE_PER_CPU(cpumask_var_t, cpus_in_cluster);
 
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
@@ -48,6 +49,11 @@ static void
 	native_x2apic_icr_write(cfg, apicid);
 }
 
+static inline u32 x2apic_cluster(int cpu)
+{
+	return per_cpu(x86_cpu_to_logical_apicid, cpu) >> 16;
+}
+
 /*
  * for now, we send the IPI's one by one in the cpumask.
  * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
@@ -163,14 +169,76 @@ static void x2apic_send_IPI_self(int vector)
 
 static void init_x2apic_ldr(void)
 {
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+
+	per_cpu(x86_cpu_to_logical_apicid, this_cpu) = apic_read(APIC_LDR);
+
+	__cpu_set(this_cpu, per_cpu(cpus_in_cluster, this_cpu));
+	for_each_online_cpu(cpu) {
+		if (x2apic_cluster(this_cpu) != x2apic_cluster(cpu))
+			continue;
+		__cpu_set(this_cpu, per_cpu(cpus_in_cluster, cpu));
+		__cpu_set(cpu, per_cpu(cpus_in_cluster, this_cpu));
+	}
+}
+
+ /*
+  * At CPU state changes, update the x2apic cluster sibling info.
+  */
+static int __cpuinit
+update_clusterinfo(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int this_cpu = (unsigned long)hcpu;
+	unsigned int cpu;
+	int err = 0;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+		if (!zalloc_cpumask_var(&per_cpu(cpus_in_cluster, this_cpu),
+					GFP_KERNEL)) {
+			err = -ENOMEM;
+		}
+		break;
+	case CPU_UP_CANCELED:
+	case CPU_UP_CANCELED_FROZEN:
+	case CPU_DEAD:
+		for_each_online_cpu(cpu) {
+			if (x2apic_cluster(this_cpu) != x2apic_cluster(cpu))
+				continue;
+			__cpu_clear(this_cpu, per_cpu(cpus_in_cluster, cpu));
+			__cpu_clear(cpu, per_cpu(cpus_in_cluster, this_cpu));
+		}
+		free_cpumask_var(per_cpu(cpus_in_cluster, this_cpu));
+		break;
+	}
+
+	return notifier_from_errno(err);
+}
+
+static struct notifier_block __refdata x2apic_cpu_notifier = {
+	.notifier_call = update_clusterinfo,
+};
+
+static int x2apic_init_cpu_notifier(void)
+{
 	int cpu = smp_processor_id();
 
-	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
+	zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
+
+	BUG_ON(!per_cpu(cpus_in_cluster, cpu));
+
+	__cpu_set(cpu, per_cpu(cpus_in_cluster, cpu));
+	register_hotcpu_notifier(&x2apic_cpu_notifier);
+	return 1;
 }
 
 static int x2apic_cluster_probe(void)
 {
-	return x2apic_mode;
+	if (x2apic_mode)
+		return x2apic_init_cpu_notifier();
+	else
+		return 0;
 }
 
 struct apic apic_x2apic_cluster = {

[tip:x86/apic] x86, x2apic: Minimize IPI register writes using cluster groups

[tip-bot for Cyrill Gorcunov]

Commit-ID:  9d0fa6c5f43f2d9c6966dcab7af96a717682fdec
Gitweb:     http://git.kernel.org/tip/9d0fa6c5f43f2d9c6966dcab7af96a717682fdec
Author:     Cyrill Gorcunov <gorcunov@openvz.org>
AuthorDate: Thu, 19 May 2011 16:45:49 -0700
Committer:  Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 20 May 2011 13:41:09 +0200

x86, x2apic: Minimize IPI register writes using cluster groups

In the case of x2apic cluster mode we can group IPI register
writes based on the cluster group instead of individual per-cpu
destination messages.

This reduces the apic register writes and reduces the amount of
IPI messages (in the best case we can reduce it by a factor of
16).

With this change, the cost of flush_tlb_others(), with the flush
tlb IPI being sent from a cpu in the socket-1 to all the logical
cpus in socket-2 (on a Westmere-EX system that has 20 logical
cpus in a socket) is 3x times better now (compared to the former
'send one-by-one' algorithm).

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.512271057@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_cluster.c |   58 +++++++++++++++++++++++++--------
 1 files changed, 44 insertions(+), 14 deletions(-)

diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 4b2bb13..4dfe936 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -5,6 +5,7 @@
 #include <linux/ctype.h>
 #include <linux/init.h>
 #include <linux/dmar.h>
+#include <linux/cpu.h>
 
 #include <asm/smp.h>
 #include <asm/apic.h>
@@ -12,6 +13,7 @@
 
 static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 static DEFINE_PER_CPU(cpumask_var_t, cpus_in_cluster);
+static DEFINE_PER_CPU(cpumask_var_t, ipi_mask);
 
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
@@ -54,30 +56,52 @@ static inline u32 x2apic_cluster(int cpu)
 	return per_cpu(x86_cpu_to_logical_apicid, cpu) >> 16;
 }
 
-/*
- * for now, we send the IPI's one by one in the cpumask.
- * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
- * at once. We have 16 cpu's in a cluster. This will minimize IPI register
- * writes.
- */
 static void
 __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
-	unsigned long query_cpu;
-	unsigned long this_cpu;
+	struct cpumask *cpus_in_cluster_ptr;
+	struct cpumask *ipi_mask_ptr;
+	unsigned int cpu, this_cpu;
 	unsigned long flags;
+	u32 dest;
 
 	x2apic_wrmsr_fence();
 
 	local_irq_save(flags);
 
 	this_cpu = smp_processor_id();
-	for_each_cpu(query_cpu, mask) {
-		if (apic_dest == APIC_DEST_ALLBUT && query_cpu == this_cpu)
+
+	/*
+	 * We are to modify mask, so we need an own copy
+	 * and be sure it's manipulated with irq off.
+	 */
+	ipi_mask_ptr = __raw_get_cpu_var(ipi_mask);
+	cpumask_copy(ipi_mask_ptr, mask);
+
+	/*
+	 * The idea is to send one IPI per cluster.
+	 */
+	for_each_cpu(cpu, ipi_mask_ptr) {
+		unsigned long i;
+
+		cpus_in_cluster_ptr = per_cpu(cpus_in_cluster, cpu);
+		dest = 0;
+
+		/* Collect cpus in cluster. */
+		for_each_cpu_and(i, ipi_mask_ptr, cpus_in_cluster_ptr) {
+			if (apic_dest == APIC_DEST_ALLINC || i != this_cpu)
+				dest |= per_cpu(x86_cpu_to_logical_apicid, i);
+		}
+
+		if (!dest)
 			continue;
-		__x2apic_send_IPI_dest(
-			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-			vector, apic->dest_logical);
+
+		__x2apic_send_IPI_dest(dest, vector, apic->dest_logical);
+		/*
+		 * Cluster sibling cpus should be discared now so
+		 * we would not send IPI them second time.
+		 */
+		cpumask_andnot(ipi_mask_ptr, ipi_mask_ptr, cpus_in_cluster_ptr);
 	}
 
 	local_irq_restore(flags);
@@ -198,6 +222,10 @@ update_clusterinfo(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		if (!zalloc_cpumask_var(&per_cpu(cpus_in_cluster, this_cpu),
 					GFP_KERNEL)) {
 			err = -ENOMEM;
+		} else if (!zalloc_cpumask_var(&per_cpu(ipi_mask, this_cpu),
+					       GFP_KERNEL)) {
+			free_cpumask_var(per_cpu(cpus_in_cluster, this_cpu));
+			err = -ENOMEM;
 		}
 		break;
 	case CPU_UP_CANCELED:
@@ -210,6 +238,7 @@ update_clusterinfo(struct notifier_block *nfb, unsigned long action, void *hcpu)
 			__cpu_clear(cpu, per_cpu(cpus_in_cluster, this_cpu));
 		}
 		free_cpumask_var(per_cpu(cpus_in_cluster, this_cpu));
+		free_cpumask_var(per_cpu(ipi_mask, this_cpu));
 		break;
 	}
 
@@ -225,8 +254,9 @@ static int x2apic_init_cpu_notifier(void)
 	int cpu = smp_processor_id();
 
 	zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
+	zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL);
 
-	BUG_ON(!per_cpu(cpus_in_cluster, cpu));
+	BUG_ON(!per_cpu(cpus_in_cluster, cpu) || !per_cpu(ipi_mask, cpu));
 
 	__cpu_set(cpu, per_cpu(cpus_in_cluster, cpu));
 	register_hotcpu_notifier(&x2apic_cpu_notifier);

[tip:x86/apic] x86, x2apic: Move the common bits to x2apic.h

[tip-bot for Cyrill Gorcunov]

Commit-ID:  79deb8e511bd6fc8e40add4da75b19df085d9453
Gitweb:     http://git.kernel.org/tip/79deb8e511bd6fc8e40add4da75b19df085d9453
Author:     Cyrill Gorcunov <gorcunov@openvz.org>
AuthorDate: Thu, 19 May 2011 16:45:50 -0700
Committer:  Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 20 May 2011 13:41:11 +0200

x86, x2apic: Move the common bits to x2apic.h

To eliminate code duplication.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.591426753@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/x2apic.h         |   62 ++++++++++++++++++++++++++++
 arch/x86/kernel/apic/x2apic_cluster.c |   71 ++-------------------------------
 arch/x86/kernel/apic/x2apic_phys.c    |   60 +--------------------------
 3 files changed, 69 insertions(+), 124 deletions(-)

diff --git a/arch/x86/include/asm/x2apic.h b/arch/x86/include/asm/x2apic.h
new file mode 100644
index 0000000..6bf5b8e
--- /dev/null
+++ b/arch/x86/include/asm/x2apic.h
@@ -0,0 +1,62 @@
+/*
+ * Common bits for X2APIC cluster/physical modes.
+ */
+
+#ifndef _ASM_X86_X2APIC_H
+#define _ASM_X86_X2APIC_H
+
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <linux/cpumask.h>
+
+/*
+ * Need to use more than cpu 0, because we need more vectors
+ * when MSI-X are used.
+ */
+static const struct cpumask *x2apic_target_cpus(void)
+{
+	return cpu_online_mask;
+}
+
+static int x2apic_apic_id_registered(void)
+{
+	return 1;
+}
+
+/*
+ * For now each logical cpu is in its own vector allocation domain.
+ */
+static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+static void
+__x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest)
+{
+	unsigned long cfg = __prepare_ICR(0, vector, dest);
+	native_x2apic_icr_write(cfg, apicid);
+}
+
+static unsigned int x2apic_get_apic_id(unsigned long id)
+{
+	return id;
+}
+
+static unsigned long x2apic_set_apic_id(unsigned int id)
+{
+	return id;
+}
+
+static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
+{
+	return initial_apicid >> index_msb;
+}
+
+static void x2apic_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+#endif /* _ASM_X86_X2APIC_H */
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 4dfe936..f7875d9 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -8,8 +8,7 @@
 #include <linux/cpu.h>
 
 #include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
+#include <asm/x2apic.h>
 
 static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 static DEFINE_PER_CPU(cpumask_var_t, cpus_in_cluster);
@@ -20,37 +19,6 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return x2apic_enabled();
 }
 
-/*
- * need to use more than cpu 0, because we need more vectors when
- * MSI-X are used.
- */
-static const struct cpumask *x2apic_target_cpus(void)
-{
-	return cpu_online_mask;
-}
-
-/*
- * for now each logical cpu is in its own vector allocation domain.
- */
-static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	cpumask_clear(retmask);
-	cpumask_set_cpu(cpu, retmask);
-}
-
-static void
- __x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest)
-{
-	unsigned long cfg;
-
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * send the IPI.
-	 */
-	native_x2apic_icr_write(cfg, apicid);
-}
-
 static inline u32 x2apic_cluster(int cpu)
 {
 	return per_cpu(x86_cpu_to_logical_apicid, cpu) >> 16;
@@ -128,11 +96,6 @@ static void x2apic_send_IPI_all(int vector)
 	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
 }
 
-static int x2apic_apic_id_registered(void)
-{
-	return 1;
-}
-
 static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
 	/*
@@ -165,32 +128,6 @@ x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return per_cpu(x86_cpu_to_logical_apicid, cpu);
 }
 
-static unsigned int x2apic_cluster_phys_get_apic_id(unsigned long x)
-{
-	unsigned int id;
-
-	id = x;
-	return id;
-}
-
-static unsigned long set_apic_id(unsigned int id)
-{
-	unsigned long x;
-
-	x = id;
-	return x;
-}
-
-static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
-{
-	return initial_apicid >> index_msb;
-}
-
-static void x2apic_send_IPI_self(int vector)
-{
-	apic_write(APIC_SELF_IPI, vector);
-}
-
 static void init_x2apic_ldr(void)
 {
 	unsigned int this_cpu = smp_processor_id();
@@ -298,11 +235,11 @@ struct apic apic_x2apic_cluster = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= x2apic_cluster_phys_pkg_id,
+	.phys_pkg_id			= x2apic_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= x2apic_cluster_phys_get_apic_id,
-	.set_apic_id			= set_apic_id,
+	.get_apic_id			= x2apic_get_apic_id,
+	.set_apic_id			= x2apic_set_apic_id,
 	.apic_id_mask			= 0xFFFFFFFFu,
 
 	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 6ef49e3..78c8f33 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -7,8 +7,7 @@
 #include <linux/dmar.h>
 
 #include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
+#include <asm/x2apic.h>
 
 int x2apic_phys;
 
@@ -27,34 +26,6 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 		return 0;
 }
 
-/*
- * need to use more than cpu 0, because we need more vectors when
- * MSI-X are used.
- */
-static const struct cpumask *x2apic_target_cpus(void)
-{
-	return cpu_online_mask;
-}
-
-static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	cpumask_clear(retmask);
-	cpumask_set_cpu(cpu, retmask);
-}
-
-static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
-				   unsigned int dest)
-{
-	unsigned long cfg;
-
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * send the IPI.
-	 */
-	native_x2apic_icr_write(cfg, apicid);
-}
-
 static void
 __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
@@ -97,11 +68,6 @@ static void x2apic_send_IPI_all(int vector)
 	__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
 }
 
-static int x2apic_apic_id_registered(void)
-{
-	return 1;
-}
-
 static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
 	/*
@@ -134,26 +100,6 @@ x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return per_cpu(x86_cpu_to_apicid, cpu);
 }
 
-static unsigned int x2apic_phys_get_apic_id(unsigned long x)
-{
-	return x;
-}
-
-static unsigned long set_apic_id(unsigned int id)
-{
-	return id;
-}
-
-static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
-{
-	return initial_apicid >> index_msb;
-}
-
-static void x2apic_send_IPI_self(int vector)
-{
-	apic_write(APIC_SELF_IPI, vector);
-}
-
 static void init_x2apic_ldr(void)
 {
 }
@@ -196,8 +142,8 @@ struct apic apic_x2apic_phys = {
 	.phys_pkg_id			= x2apic_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= x2apic_phys_get_apic_id,
-	.set_apic_id			= set_apic_id,
+	.get_apic_id			= x2apic_get_apic_id,
+	.set_apic_id			= x2apic_set_apic_id,
 	.apic_id_mask			= 0xFFFFFFFFu,
 
 	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,

Re: [patch 6/6] x86, apic: use .apicdrivers section to find the list of apic drivers

[Yinghai Lu]

On 05/19/2011 04:45 PM, Suresh Siddha wrote:
> --- linux-2.6-tip.orig/arch/x86/kernel/apic/apic_flat_64.c
> +++ linux-2.6-tip/arch/x86/kernel/apic/apic_flat_64.c
> @@ -24,6 +24,8 @@
>  #include <acpi/acpi_bus.h>
>  #endif
>  
> +static struct apic apic_physflat;
> +
>  static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
>  {
>  	return 1;
> @@ -164,7 +166,7 @@ static int flat_phys_pkg_id(int initial_
>  	return initial_apic_id >> index_msb;
>  }
>  
> -struct apic apic_flat =  {
> +static struct apic apic_flat =  {
>  	.name				= "flat",
>  	.probe				= NULL,
>  	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
> @@ -320,7 +322,7 @@ static int physflat_probe(void)
>  	return 0;
>  }
>  
> -struct apic apic_physflat =  {
> +static struct apic apic_physflat =  {
>  
>  	.name				= "physical flat",
>  	.probe				= physflat_probe,
> @@ -377,3 +379,8 @@ struct apic apic_physflat =  {
>  	.wait_icr_idle			= native_apic_wait_icr_idle,
>  	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
>  };
> +
> +/*
> + * We need to check for physflat first, so this order is important.
> + */
> +apic_drivers(apic_physflat, apic_flat);
> Index: linux-2.6-tip/arch/x86/kernel/apic/probe_64.c
> ===================================================================
> --- linux-2.6-tip.orig/arch/x86/kernel/apic/probe_64.c
> +++ linux-2.6-tip/arch/x86/kernel/apic/probe_64.c
> @@ -23,27 +23,9 @@
>  #include <asm/ipi.h>
>  #include <asm/setup.h>
>  
> -extern struct apic apic_flat;
> -extern struct apic apic_physflat;
> -extern struct apic apic_x2xpic_uv_x;
> -extern struct apic apic_x2apic_phys;
> -extern struct apic apic_x2apic_cluster;
> -
> -struct apic __read_mostly *apic = &apic_flat;
> +struct apic __read_mostly *apic;
>  EXPORT_SYMBOL_GPL(apic);
>  
> -static struct apic *apic_probe[] __initdata = {
> -#ifdef CONFIG_X86_UV
> -	&apic_x2apic_uv_x,
> -#endif
> -#ifdef CONFIG_X86_X2APIC
> -	&apic_x2apic_phys,
> -	&apic_x2apic_cluster,
> -#endif
> -	&apic_physflat,
> -	NULL,
> -};
> -
>  static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
>  {
>  	return hard_smp_processor_id() >> index_msb;
> @@ -54,19 +36,19 @@ static int apicid_phys_pkg_id(int initia
>   */
>  void __init default_setup_apic_routing(void)
>  {
> -	int i;
> +	struct apic **drv;
>  
>  	enable_IR_x2apic();
>  
> -	for (i = 0; apic_probe[i]; ++i) {
> -		if (apic_probe[i]->probe()) {
> -			apic = apic_probe[i];
> +	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
> +		if ((*drv)->probe()) {
> +			apic = *drv;
> +			printk(KERN_INFO "APIC routing finalized to %s.\n",
> +			       apic->name);
>  			break;
>  		}
>  	}

can you change to:

+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if ((*drv)->probe()) {
+			if (apic != *drv) {
+				apic = *drv;				
+				printk(KERN_INFO "Changing APIC routing to %s.\n",
+				       apic->name);
+			}
 			break;
 		}
 	}

Thanks

Yinghai

Re: [patch 6/6] x86, apic: use .apicdrivers section to find the list of apic drivers

[Cyrill Gorcunov]

On 05/20/2011 03:45 AM, Suresh Siddha wrote:
> This will enable each apic driver to be self-contained and eliminate the need
> for apic_probe[].
> 
> Apic probe will now depend on the order in which apic drivers are listed in
> the .apicdrivers section. Ordering of apic driver files in the Makefile
> and the macros apic_driver()/apic_drivers() help enforce the desired order.
> 
> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
> ---
...
> Index: linux-2.6-tip/arch/x86/kernel/vmlinux.lds.S
> ===================================================================
> --- linux-2.6-tip.orig/arch/x86/kernel/vmlinux.lds.S
> +++ linux-2.6-tip/arch/x86/kernel/vmlinux.lds.S
> @@ -305,6 +305,12 @@ SECTIONS
>  		__iommu_table_end = .;
>  	}
>  

Seems we miss ALIGN here, no?

	. = ALIGN(8);

> +	.apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
> +		__apicdrivers = .;
> +		*(.apicdrivers);
> +		__apicdrivers_end = .;
> +	}
> +
...
-- 
    Cyrill

Re: [patch 6/6] x86, apic: use .apicdrivers section to find the list of apic drivers

[Suresh Siddha]

On Fri, 2011-05-20 at 06:01 -0700, Ingo Molnar wrote:
> * Suresh Siddha <suresh.b.siddha@intel.com> wrote:
> 
> > This will enable each apic driver to be self-contained and eliminate the need
> > for apic_probe[].
> > 
> > Apic probe will now depend on the order in which apic drivers are listed in
> > the .apicdrivers section. Ordering of apic driver files in the Makefile
> > and the macros apic_driver()/apic_drivers() help enforce the desired order.
> > 
> > Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
> > ---
> >  arch/x86/include/asm/apic.h           |   25 ++++++++++---
> >  arch/x86/kernel/apic/Makefile         |   17 +++++---
> >  arch/x86/kernel/apic/apic_flat_64.c   |   11 ++++-
> >  arch/x86/kernel/apic/bigsmp_32.c      |    2 +
> >  arch/x86/kernel/apic/es7000_32.c      |    9 +++-
> >  arch/x86/kernel/apic/numaq_32.c       |    7 ++-
> >  arch/x86/kernel/apic/probe_32.c       |   65 ++++++++++++----------------------
> >  arch/x86/kernel/apic/probe_64.c       |   43 ++++++----------------
> >  arch/x86/kernel/apic/summit_32.c      |    4 +-
> >  arch/x86/kernel/apic/x2apic_cluster.c |    4 +-
> >  arch/x86/kernel/apic/x2apic_phys.c    |    6 ++-
> >  arch/x86/kernel/apic/x2apic_uv_x.c    |    6 ++-
> >  arch/x86/kernel/vmlinux.lds.S         |    6 +++
> >  13 files changed, 111 insertions(+), 94 deletions(-)
> 
> This patch crashes one of my testboxes (AMD X2 whitebox, config attached). No 
> crashlog.

oops. obviously just testing on small and big servers was not enough :(

flat mode was broken, as it had null probe routine. Old code didn't have
flat mode listed in the apic probe array (as the flat mode was the
default option). Will fix it and split it into multiple patches.

thanks.
> 
> The patch is also clearly too large and should be split up into 4 pieces:
> 
>  - there should be a patch adding the whole driver section thing and marking 
>    all the existing APIC drivers with it
> 
>  - one patch adding the functions doing the new-style probing.
> 
>  - one patch flipping over from old-style to new-style probing
> 
>  - a final patch removing all the stale functions and marking the APIC driver
>    probe functions static.
> 
> Thanks,
> 
> 	Ingo