From: Tarun Kanti DebBarma <tarun.kanti@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@ti.com, santosh.shilimkar@ti.com, tony@atomide.com,
linux-arm-kernel@lists.infradead.org,
Tarun Kanti DebBarma <tarun.kanti@ti.com>,
Charulatha V <charu@ti.com>
Subject: [PATCH 10/15] OMAP: GPIO: cleanup prepare/resume idle functions
Date: Tue, 24 May 2011 19:54:49 +0530 [thread overview]
Message-ID: <1306247094-25372-11-git-send-email-tarun.kanti@ti.com> (raw)
In-Reply-To: <1306247094-25372-1-git-send-email-tarun.kanti@ti.com>
By adding level and edge detection register offsets and then initializing them
correctly according to OMAP versions during device registrations we can now remove
lot of revision checks in these functions.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Charulatha V <charu@ti.com>
---
arch/arm/mach-omap2/gpio.c | 8 ++
arch/arm/plat-omap/include/plat/gpio.h | 4 +
drivers/gpio/gpio_omap.c | 116 ++++++++++----------------------
3 files changed, 48 insertions(+), 80 deletions(-)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 7e79999..0f8782f 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -111,6 +111,10 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
+ pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
+ pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
+ pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
+ pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
pdata->regs->wkupstatus = OMAP24XX_GPIO_WAKE_EN;
pdata->regs->wkupclear = OMAP24XX_GPIO_CLEARWKUENA;
pdata->regs->wkupset = OMAP24XX_GPIO_SETWKUENA;
@@ -131,6 +135,10 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
pdata->regs->ctrl = OMAP4_GPIO_CTRL;
+ pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
+ pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
+ pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
+ pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
pdata->regs->wkupstatus = OMAP4_GPIO_IRQWAKEN0;
pdata->regs->wkupclear = OMAP4_GPIO_IRQWAKEN0;
pdata->regs->wkupset = OMAP4_GPIO_IRQWAKEN0;
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 2d1a5d6..7712e97 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -189,6 +189,10 @@ struct omap_gpio_reg_offs {
u16 debounce;
u16 debounce_en;
u16 ctrl;
+ u16 leveldetect0;
+ u16 leveldetect1;
+ u16 risingdetect;
+ u16 fallingdetect;
u16 wkupstatus;
u16 wkupclear;
u16 wkupset;
diff --git a/drivers/gpio/gpio_omap.c b/drivers/gpio/gpio_omap.c
index c189416..28390a9 100644
--- a/drivers/gpio/gpio_omap.c
+++ b/drivers/gpio/gpio_omap.c
@@ -267,15 +267,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
}
- if (cpu_is_omap44xx()) {
- bank->level_mask =
- __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
- } else {
- bank->level_mask =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- }
+ bank->level_mask =
+ __raw_readl(bank->base + bank->regs->leveldetect0) |
+ __raw_readl(bank->base + bank->regs->leveldetect1);
}
#endif
@@ -1181,9 +1175,11 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
* values every time in suspend/resume functions and for all the
* gpio banks.
*/
- bank->wake_status = bank->base + bank->regs->wkupstatus;
- bank->wake_clear = bank->base + bank->regs->wkupclear;
- bank->wake_set = bank->base + bank->regs->wkupset;
+ if (bank->regs->wkupstatus != USHRT_MAX) {
+ bank->wake_status = bank->base + bank->regs->wkupstatus;
+ bank->wake_clear = bank->base + bank->regs->wkupclear;
+ bank->wake_set = bank->base + bank->regs->wkupset;
+ }
pm_runtime_enable(bank->dev);
pm_runtime_get_sync(bank->dev);
@@ -1284,40 +1280,18 @@ void omap2_gpio_prepare_for_idle(int off_mode)
if (!(bank->enabled_non_wakeup_gpios))
goto save_gpio_ctx;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- bank->saved_datain = __raw_readl(bank->base +
- OMAP24XX_GPIO_DATAIN);
- l1 = __raw_readl(bank->base +
- OMAP24XX_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base +
- OMAP24XX_GPIO_RISINGDETECT);
- }
-
- if (cpu_is_omap44xx()) {
- bank->saved_datain = __raw_readl(bank->base +
- OMAP4_GPIO_DATAIN);
- l1 = __raw_readl(bank->base +
- OMAP4_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base +
- OMAP4_GPIO_RISINGDETECT);
- }
+ bank->saved_datain = __raw_readl(bank->base +
+ bank->regs->datain);
+ l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
+ l2 = __raw_readl(bank->base + bank->regs->risingdetect);
bank->saved_fallingdetect = l1;
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- __raw_writel(l1, bank->base +
- OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base +
- OMAP24XX_GPIO_RISINGDETECT);
- }
-
- if (cpu_is_omap44xx()) {
- __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
- }
+ __raw_writel(l1, bank->base + bank->regs->fallingdetect);
+ __raw_writel(l2, bank->base + bank->regs->risingdetect);
bank->off_mode_wkup_wa_enabled = true;
@@ -1357,21 +1331,11 @@ void omap2_gpio_resume_after_idle(void)
if (!(bank->enabled_non_wakeup_gpios))
goto restore_gpio_ctx;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- __raw_writel(bank->saved_fallingdetect,
- bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
- bank->base + OMAP24XX_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
- }
-
- if (cpu_is_omap44xx()) {
- __raw_writel(bank->saved_fallingdetect,
- bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
- bank->base + OMAP4_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
- }
+ __raw_writel(bank->saved_fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ __raw_writel(bank->saved_risingdetect,
+ bank->base + bank->regs->risingdetect);
+ l = __raw_readl(bank->base + bank->regs->datain);
/* Check if any of the non-wakeup interrupt GPIOs have changed
* state. If so, generate an IRQ by software. This is
@@ -1399,42 +1363,34 @@ void omap2_gpio_resume_after_idle(void)
if (gen) {
u32 old0, old1;
+ old0 = __raw_readl(bank->base +
+ bank->regs->leveldetect0);
+ old1 = __raw_readl(bank->base +
+ bank->regs->leveldetect1);
+
+ __raw_writel(old0, bank->base +
+ bank->regs->leveldetect0);
+ __raw_writel(old1, bank->base +
+ bank->regs->leveldetect1);
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- old0 = __raw_readl(bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0 | gen, bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1 | gen, bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
+ old0 |= gen;
+ old1 |= gen;
}
if (cpu_is_omap44xx()) {
- old0 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
+ old0 |= l;
+ old1 |= l;
}
+ __raw_writel(old0, bank->base +
+ bank->regs->leveldetect0);
+ __raw_writel(old1, bank->base +
+ bank->regs->leveldetect1);
}
restore_gpio_ctx:
bank->off_mode_wkup_wa_enabled = false;
omap_gpio_restore_context(bank);
}
-
}
void omap_gpio_save_context(struct gpio_bank *bank)
--
1.6.0.4
WARNING: multiple messages have this Message-ID (diff)
From: tarun.kanti@ti.com (Tarun Kanti DebBarma)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/15] OMAP: GPIO: cleanup prepare/resume idle functions
Date: Tue, 24 May 2011 19:54:49 +0530 [thread overview]
Message-ID: <1306247094-25372-11-git-send-email-tarun.kanti@ti.com> (raw)
In-Reply-To: <1306247094-25372-1-git-send-email-tarun.kanti@ti.com>
By adding level and edge detection register offsets and then initializing them
correctly according to OMAP versions during device registrations we can now remove
lot of revision checks in these functions.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Charulatha V <charu@ti.com>
---
arch/arm/mach-omap2/gpio.c | 8 ++
arch/arm/plat-omap/include/plat/gpio.h | 4 +
drivers/gpio/gpio_omap.c | 116 ++++++++++----------------------
3 files changed, 48 insertions(+), 80 deletions(-)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 7e79999..0f8782f 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -111,6 +111,10 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
+ pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
+ pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
+ pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
+ pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
pdata->regs->wkupstatus = OMAP24XX_GPIO_WAKE_EN;
pdata->regs->wkupclear = OMAP24XX_GPIO_CLEARWKUENA;
pdata->regs->wkupset = OMAP24XX_GPIO_SETWKUENA;
@@ -131,6 +135,10 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
pdata->regs->ctrl = OMAP4_GPIO_CTRL;
+ pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
+ pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
+ pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
+ pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
pdata->regs->wkupstatus = OMAP4_GPIO_IRQWAKEN0;
pdata->regs->wkupclear = OMAP4_GPIO_IRQWAKEN0;
pdata->regs->wkupset = OMAP4_GPIO_IRQWAKEN0;
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 2d1a5d6..7712e97 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -189,6 +189,10 @@ struct omap_gpio_reg_offs {
u16 debounce;
u16 debounce_en;
u16 ctrl;
+ u16 leveldetect0;
+ u16 leveldetect1;
+ u16 risingdetect;
+ u16 fallingdetect;
u16 wkupstatus;
u16 wkupclear;
u16 wkupset;
diff --git a/drivers/gpio/gpio_omap.c b/drivers/gpio/gpio_omap.c
index c189416..28390a9 100644
--- a/drivers/gpio/gpio_omap.c
+++ b/drivers/gpio/gpio_omap.c
@@ -267,15 +267,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
}
- if (cpu_is_omap44xx()) {
- bank->level_mask =
- __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
- } else {
- bank->level_mask =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- }
+ bank->level_mask =
+ __raw_readl(bank->base + bank->regs->leveldetect0) |
+ __raw_readl(bank->base + bank->regs->leveldetect1);
}
#endif
@@ -1181,9 +1175,11 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
* values every time in suspend/resume functions and for all the
* gpio banks.
*/
- bank->wake_status = bank->base + bank->regs->wkupstatus;
- bank->wake_clear = bank->base + bank->regs->wkupclear;
- bank->wake_set = bank->base + bank->regs->wkupset;
+ if (bank->regs->wkupstatus != USHRT_MAX) {
+ bank->wake_status = bank->base + bank->regs->wkupstatus;
+ bank->wake_clear = bank->base + bank->regs->wkupclear;
+ bank->wake_set = bank->base + bank->regs->wkupset;
+ }
pm_runtime_enable(bank->dev);
pm_runtime_get_sync(bank->dev);
@@ -1284,40 +1280,18 @@ void omap2_gpio_prepare_for_idle(int off_mode)
if (!(bank->enabled_non_wakeup_gpios))
goto save_gpio_ctx;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- bank->saved_datain = __raw_readl(bank->base +
- OMAP24XX_GPIO_DATAIN);
- l1 = __raw_readl(bank->base +
- OMAP24XX_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base +
- OMAP24XX_GPIO_RISINGDETECT);
- }
-
- if (cpu_is_omap44xx()) {
- bank->saved_datain = __raw_readl(bank->base +
- OMAP4_GPIO_DATAIN);
- l1 = __raw_readl(bank->base +
- OMAP4_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base +
- OMAP4_GPIO_RISINGDETECT);
- }
+ bank->saved_datain = __raw_readl(bank->base +
+ bank->regs->datain);
+ l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
+ l2 = __raw_readl(bank->base + bank->regs->risingdetect);
bank->saved_fallingdetect = l1;
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- __raw_writel(l1, bank->base +
- OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base +
- OMAP24XX_GPIO_RISINGDETECT);
- }
-
- if (cpu_is_omap44xx()) {
- __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
- }
+ __raw_writel(l1, bank->base + bank->regs->fallingdetect);
+ __raw_writel(l2, bank->base + bank->regs->risingdetect);
bank->off_mode_wkup_wa_enabled = true;
@@ -1357,21 +1331,11 @@ void omap2_gpio_resume_after_idle(void)
if (!(bank->enabled_non_wakeup_gpios))
goto restore_gpio_ctx;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- __raw_writel(bank->saved_fallingdetect,
- bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
- bank->base + OMAP24XX_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
- }
-
- if (cpu_is_omap44xx()) {
- __raw_writel(bank->saved_fallingdetect,
- bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
- bank->base + OMAP4_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
- }
+ __raw_writel(bank->saved_fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ __raw_writel(bank->saved_risingdetect,
+ bank->base + bank->regs->risingdetect);
+ l = __raw_readl(bank->base + bank->regs->datain);
/* Check if any of the non-wakeup interrupt GPIOs have changed
* state. If so, generate an IRQ by software. This is
@@ -1399,42 +1363,34 @@ void omap2_gpio_resume_after_idle(void)
if (gen) {
u32 old0, old1;
+ old0 = __raw_readl(bank->base +
+ bank->regs->leveldetect0);
+ old1 = __raw_readl(bank->base +
+ bank->regs->leveldetect1);
+
+ __raw_writel(old0, bank->base +
+ bank->regs->leveldetect0);
+ __raw_writel(old1, bank->base +
+ bank->regs->leveldetect1);
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- old0 = __raw_readl(bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0 | gen, bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1 | gen, bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
+ old0 |= gen;
+ old1 |= gen;
}
if (cpu_is_omap44xx()) {
- old0 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
+ old0 |= l;
+ old1 |= l;
}
+ __raw_writel(old0, bank->base +
+ bank->regs->leveldetect0);
+ __raw_writel(old1, bank->base +
+ bank->regs->leveldetect1);
}
restore_gpio_ctx:
bank->off_mode_wkup_wa_enabled = false;
omap_gpio_restore_context(bank);
}
-
}
void omap_gpio_save_context(struct gpio_bank *bank)
--
1.6.0.4
next prev parent reply other threads:[~2011-05-24 14:25 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-24 14:24 [PATCH 00/15] OMAP: GPIO: Cleanup OMAP GPIO driver Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-24 14:24 ` [PATCH 01/15] OMAP: GPIO: Avoid cpu_is checks during module ena/disable Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 21:19 ` Kevin Hilman
2011-05-25 21:19 ` Kevin Hilman
2011-05-26 9:38 ` Varadarajan, Charulatha
2011-05-26 9:38 ` Varadarajan, Charulatha
2011-05-24 14:24 ` [PATCH 02/15] OMAP2PLUS: GPIO: Fix non-wakeup GPIO and rev_ids Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 21:34 ` Kevin Hilman
2011-05-25 21:34 ` Kevin Hilman
2011-05-26 9:38 ` Varadarajan, Charulatha
2011-05-26 9:38 ` Varadarajan, Charulatha
2011-05-26 17:15 ` Kevin Hilman
2011-05-26 17:15 ` Kevin Hilman
2011-05-26 17:39 ` Varadarajan, Charulatha
2011-05-26 17:39 ` Varadarajan, Charulatha
2011-05-26 18:32 ` Kevin Hilman
2011-05-26 18:32 ` Kevin Hilman
2011-05-26 9:23 ` Premi, Sanjeev
2011-05-26 9:23 ` Premi, Sanjeev
2011-05-26 9:43 ` Varadarajan, Charulatha
2011-05-26 9:43 ` Varadarajan, Charulatha
2011-05-26 10:11 ` Cousson, Benoit
2011-05-26 10:11 ` Cousson, Benoit
2011-05-26 11:47 ` Premi, Sanjeev
2011-05-26 11:47 ` Premi, Sanjeev
2011-05-26 12:11 ` Cousson, Benoit
2011-05-26 12:11 ` Cousson, Benoit
2011-05-26 12:38 ` Premi, Sanjeev
2011-05-26 12:38 ` Premi, Sanjeev
2011-05-26 12:46 ` Cousson, Benoit
2011-05-26 12:46 ` Cousson, Benoit
2011-05-26 13:19 ` Premi, Sanjeev
2011-05-26 13:19 ` Premi, Sanjeev
2011-05-26 13:38 ` B.J. Buchalter
2011-05-26 13:38 ` B.J. Buchalter
2011-05-26 14:12 ` Cousson, Benoit
2011-05-26 14:12 ` Cousson, Benoit
2011-05-24 14:24 ` [PATCH 03/15] OMAP: GPIO: Remove dependency on gpio_bank_count Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-24 14:24 ` [PATCH 04/15] OMAP2PLUS: GPIO: Use flag to identify wkup dmn GPIO Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 21:40 ` Kevin Hilman
2011-05-25 21:40 ` Kevin Hilman
2011-05-24 14:24 ` [PATCH 05/15] OMAP: GPIO: Make gpio_context part of gpio_bank structure Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 21:41 ` Kevin Hilman
2011-05-25 21:41 ` Kevin Hilman
2011-05-26 9:58 ` Premi, Sanjeev
2011-05-26 9:58 ` Premi, Sanjeev
2011-05-26 10:07 ` Varadarajan, Charulatha
2011-05-26 10:07 ` Varadarajan, Charulatha
2011-05-26 9:59 ` Premi, Sanjeev
2011-05-26 9:59 ` Premi, Sanjeev
2011-05-24 14:24 ` [PATCH 06/15] OMAP4: GPIO: Save/restore context Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 21:43 ` Kevin Hilman
2011-05-25 21:43 ` Kevin Hilman
2011-05-26 9:37 ` Varadarajan, Charulatha
2011-05-26 9:37 ` Varadarajan, Charulatha
2011-05-24 14:24 ` [PATCH 07/15] OMAP: GPIO: handle save/restore ctx in GPIO driver Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 22:33 ` Kevin Hilman
2011-05-25 22:33 ` Kevin Hilman
2011-05-25 22:36 ` Kevin Hilman
2011-05-25 22:36 ` Kevin Hilman
2011-05-24 14:24 ` [PATCH 08/15] OMAP2+: GPIO: make workaround_enabled bank specific Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 22:39 ` Kevin Hilman
2011-05-25 22:39 ` Kevin Hilman
2011-05-26 9:37 ` Varadarajan, Charulatha
2011-05-26 9:37 ` Varadarajan, Charulatha
2011-05-24 14:24 ` [PATCH 09/15] OMAP: GPIO: cleanup suspend and resume functions Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 22:57 ` Kevin Hilman
2011-05-25 22:57 ` Kevin Hilman
2011-05-26 10:02 ` Varadarajan, Charulatha
2011-05-26 10:02 ` Varadarajan, Charulatha
2011-05-24 14:24 ` Tarun Kanti DebBarma [this message]
2011-05-24 14:24 ` [PATCH 10/15] OMAP: GPIO: cleanup prepare/resume idle functions Tarun Kanti DebBarma
2011-05-25 23:00 ` Kevin Hilman
2011-05-25 23:00 ` Kevin Hilman
2011-05-24 14:24 ` [PATCH 11/15] OMAP: GPIO: Remove hardcoded offsets in ctxt save/restore Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 23:01 ` Kevin Hilman
2011-05-25 23:01 ` Kevin Hilman
2011-05-26 9:36 ` Varadarajan, Charulatha
2011-05-26 9:36 ` Varadarajan, Charulatha
2011-05-26 9:42 ` Premi, Sanjeev
2011-05-26 9:42 ` Premi, Sanjeev
2011-05-26 9:48 ` Varadarajan, Charulatha
2011-05-26 9:48 ` Varadarajan, Charulatha
2011-05-24 14:24 ` [PATCH 12/15] OMAP: GPIO: Fix: use wake set/clear regs Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 23:14 ` Kevin Hilman
2011-05-25 23:14 ` Kevin Hilman
2011-05-26 9:36 ` Varadarajan, Charulatha
2011-05-26 9:36 ` Varadarajan, Charulatha
2011-05-24 14:24 ` [PATCH 13/15] OMAP: GPIO: clean set_gpio_triggering function Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 23:27 ` Kevin Hilman
2011-05-25 23:27 ` Kevin Hilman
2011-05-26 9:55 ` Varadarajan, Charulatha
2011-05-26 9:55 ` Varadarajan, Charulatha
2011-05-24 14:24 ` [PATCH 14/15] OMAP: GPIO: Use memset for omap_gpio_reg_offs Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 23:30 ` Kevin Hilman
2011-05-25 23:30 ` Kevin Hilman
2011-05-24 14:24 ` [PATCH 15/15] OMAP: GPIO: clean omap_gpio_mod_init function Tarun Kanti DebBarma
2011-05-24 14:24 ` Tarun Kanti DebBarma
2011-05-25 23:48 ` Kevin Hilman
2011-05-25 23:48 ` Kevin Hilman
2011-06-03 11:20 ` Varadarajan, Charulatha
2011-06-03 11:20 ` Varadarajan, Charulatha
2011-06-03 14:31 ` Kevin Hilman
2011-06-03 14:31 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306247094-25372-11-git-send-email-tarun.kanti@ti.com \
--to=tarun.kanti@ti.com \
--cc=charu@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.