[PATCH 0/31] nVMX: Nested VMX, v11

[PATCH 0/31] nVMX: Nested VMX, v11

[Nadav Har'El]

Hi,

This is the eleventh iteration of the nested VMX patch set, and hopefully the
last in this format.

Improvements in this version over the previous one include:

 * Overhauled vmcs, cpu, and launched handling (new loaded_vmcs structure and
   per-cpu linked-list replacing old vcpu linked-list).

 * Added missing checks that VMPTRLD was done, in emulating VMLAUNCH and some
   other VMX instructions.

 * prepare_vmcs02 is now void, and cannot fail. Correctly handle the case
   of apic-access page with an invalid GPA.

 * A bunch of corrections to errors and omissions discovered by Kevin Tian.

 * Miscellenous function name changes, and other cosmetic improvements.

This new set of patches applies to the current KVM trunk (I checked with
5b186b275c0288c8576d26baebe9019875d68a2b).

Avi, please apply.

Nadav.


About nested VMX:
-----------------

The following 31 patches implement nested VMX support. This feature enables
a guest to use the VMX APIs in order to run its own nested guests.
In other words, it allows running hypervisors (that use VMX) under KVM.
Multiple guest hypervisors can be run concurrently, and each of those can
in turn host multiple guests.

The theory behind this work, our implementation, and its performance
characteristics were presented in OSDI 2010 (the USENIX Symposium on
Operating Systems Design and Implementation). Our paper was titled
"The Turtles Project: Design and Implementation of Nested Virtualization",
and was awarded "Jay Lepreau Best Paper". The paper is available online, at:

	http://www.usenix.org/events/osdi10/tech/full_papers/Ben-Yehuda.pdf

This patch set does not include all the features described in the paper.
In particular, this patch set is missing nested EPT (L1 can't use EPT and
must use shadow page tables). It is also missing some features required to
run VMWare hypervisors as a guest. These missing features will be sent as
follow-on patchs.

Running nested VMX:
------------------

The nested VMX feature is currently disabled by default. It must be
explicitly enabled with the "nested=1" option to the kvm-intel module.

No modifications are required to user space (qemu). However, qemu's default
emulated CPU type (qemu64) does not list the "VMX" CPU feature, so it must be
explicitly enabled, by giving qemu one of the following options:

     -cpu host              (emulated CPU has all features of the real CPU)

     -cpu qemu64,+vmx       (add just the vmx feature to a named CPU type)


This version was only tested with KVM (64-bit) as a guest hypervisor, and
Linux as a nested guest.


Patch statistics:
-----------------

 Documentation/kvm/nested-vmx.txt |  251 ++
 arch/x86/include/asm/kvm_host.h  |    2 
 arch/x86/include/asm/msr-index.h |   12 
 arch/x86/include/asm/vmx.h       |   43 
 arch/x86/kvm/svm.c               |    6 
 arch/x86/kvm/vmx.c               | 2733 +++++++++++++++++++++++++++--
 arch/x86/kvm/x86.c               |   11 
 arch/x86/kvm/x86.h               |    8 
 8 files changed, 2907 insertions(+), 159 deletions(-)

--
Nadav Har'El
IBM Haifa Research Lab

[PATCH 01/31] nVMX: Keep list of loaded VMCSs, instead of vcpus.

[Nadav Har'El]

In VMX, before we bring down a CPU we must VMCLEAR all VMCSs loaded on it
because (at least in theory) the processor might not have written all of its
content back to memory. Since a patch from June 26, 2008, this is done using
a per-cpu "vcpus_on_cpu" linked list of vcpus loaded on each CPU.

The problem is that with nested VMX, we no longer have the concept of a
vcpu being loaded on a cpu: A vcpu has multiple VMCSs (one for L1, a pool for
L2s), and each of those may be have been last loaded on a different cpu.

So instead of linking the vcpus, we link the VMCSs, using a new structure
loaded_vmcs. This structure contains the VMCS, and the information pertaining
to its loading on a specific cpu (namely, the cpu number, and whether it
was already launched on this cpu once). In nested we will also use the same
structure to hold L2 VMCSs, and vmx->loaded_vmcs is a pointer to the
currently active VMCS.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |  150 ++++++++++++++++++++++++-------------------
 1 file changed, 86 insertions(+), 64 deletions(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:45.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:45.000000000 +0300
@@ -118,6 +118,18 @@ struct vmcs {
 	char data[0];
 };
 
+/*
+ * Track a VMCS that may be loaded on a certain CPU. If it is (cpu!=-1), also
+ * remember whether it was VMLAUNCHed, and maintain a linked list of all VMCSs
+ * loaded on this CPU (so we can clear them if the CPU goes down).
+ */
+struct loaded_vmcs {
+	struct vmcs *vmcs;
+	int cpu;
+	int launched;
+	struct list_head loaded_vmcss_on_cpu_link;
+};
+
 struct shared_msr_entry {
 	unsigned index;
 	u64 data;
@@ -126,9 +138,7 @@ struct shared_msr_entry {
 
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
-	struct list_head      local_vcpus_link;
 	unsigned long         host_rsp;
-	int                   launched;
 	u8                    fail;
 	u8                    cpl;
 	bool                  nmi_known_unmasked;
@@ -142,7 +152,14 @@ struct vcpu_vmx {
 	u64 		      msr_host_kernel_gs_base;
 	u64 		      msr_guest_kernel_gs_base;
 #endif
-	struct vmcs          *vmcs;
+	/*
+	 * loaded_vmcs points to the VMCS currently used in this vcpu. For a
+	 * non-nested (L1) guest, it always points to vmcs01. For a nested
+	 * guest (L2), it points to a different VMCS.
+	 */
+	struct loaded_vmcs    vmcs01;
+	struct loaded_vmcs   *loaded_vmcs;
+	bool                  __launched; /* temporary, used in vmx_vcpu_run */
 	struct msr_autoload {
 		unsigned nr;
 		struct vmx_msr_entry guest[NR_AUTOLOAD_MSRS];
@@ -202,7 +219,11 @@ static int vmx_set_tss_addr(struct kvm *
 
 static DEFINE_PER_CPU(struct vmcs *, vmxarea);
 static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
-static DEFINE_PER_CPU(struct list_head, vcpus_on_cpu);
+/*
+ * We maintain a per-CPU linked-list of VMCS loaded on that CPU. This is needed
+ * when a CPU is brought down, and we need to VMCLEAR all VMCSs loaded on it.
+ */
+static DEFINE_PER_CPU(struct list_head, loaded_vmcss_on_cpu);
 static DEFINE_PER_CPU(struct desc_ptr, host_gdt);
 
 static unsigned long *vmx_io_bitmap_a;
@@ -503,6 +524,13 @@ static void vmcs_clear(struct vmcs *vmcs
 		       vmcs, phys_addr);
 }
 
+static inline void loaded_vmcs_init(struct loaded_vmcs *loaded_vmcs)
+{
+	vmcs_clear(loaded_vmcs->vmcs);
+	loaded_vmcs->cpu = -1;
+	loaded_vmcs->launched = 0;
+}
+
 static void vmcs_load(struct vmcs *vmcs)
 {
 	u64 phys_addr = __pa(vmcs);
@@ -516,25 +544,24 @@ static void vmcs_load(struct vmcs *vmcs)
 		       vmcs, phys_addr);
 }
 
-static void __vcpu_clear(void *arg)
+static void __loaded_vmcs_clear(void *arg)
 {
-	struct vcpu_vmx *vmx = arg;
+	struct loaded_vmcs *loaded_vmcs = arg;
 	int cpu = raw_smp_processor_id();
 
-	if (vmx->vcpu.cpu == cpu)
-		vmcs_clear(vmx->vmcs);
-	if (per_cpu(current_vmcs, cpu) == vmx->vmcs)
+	if (loaded_vmcs->cpu != cpu)
+		return; /* vcpu migration can race with cpu offline */
+	if (per_cpu(current_vmcs, cpu) == loaded_vmcs->vmcs)
 		per_cpu(current_vmcs, cpu) = NULL;
-	list_del(&vmx->local_vcpus_link);
-	vmx->vcpu.cpu = -1;
-	vmx->launched = 0;
+	list_del(&loaded_vmcs->loaded_vmcss_on_cpu_link);
+	loaded_vmcs_init(loaded_vmcs);
 }
 
-static void vcpu_clear(struct vcpu_vmx *vmx)
+static void loaded_vmcs_clear(struct loaded_vmcs *loaded_vmcs)
 {
-	if (vmx->vcpu.cpu == -1)
-		return;
-	smp_call_function_single(vmx->vcpu.cpu, __vcpu_clear, vmx, 1);
+	if (loaded_vmcs->cpu != -1)
+		smp_call_function_single(
+			loaded_vmcs->cpu, __loaded_vmcs_clear, loaded_vmcs, 1);
 }
 
 static inline void vpid_sync_vcpu_single(struct vcpu_vmx *vmx)
@@ -973,22 +1000,22 @@ static void vmx_vcpu_load(struct kvm_vcp
 
 	if (!vmm_exclusive)
 		kvm_cpu_vmxon(phys_addr);
-	else if (vcpu->cpu != cpu)
-		vcpu_clear(vmx);
+	else if (vmx->loaded_vmcs->cpu != cpu)
+		loaded_vmcs_clear(vmx->loaded_vmcs);
 
-	if (per_cpu(current_vmcs, cpu) != vmx->vmcs) {
-		per_cpu(current_vmcs, cpu) = vmx->vmcs;
-		vmcs_load(vmx->vmcs);
+	if (per_cpu(current_vmcs, cpu) != vmx->loaded_vmcs->vmcs) {
+		per_cpu(current_vmcs, cpu) = vmx->loaded_vmcs->vmcs;
+		vmcs_load(vmx->loaded_vmcs->vmcs);
 	}
 
-	if (vcpu->cpu != cpu) {
+	if (vmx->loaded_vmcs->cpu != cpu) {
 		struct desc_ptr *gdt = &__get_cpu_var(host_gdt);
 		unsigned long sysenter_esp;
 
 		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
 		local_irq_disable();
-		list_add(&vmx->local_vcpus_link,
-			 &per_cpu(vcpus_on_cpu, cpu));
+		list_add(&vmx->loaded_vmcs->loaded_vmcss_on_cpu_link,
+			 &per_cpu(loaded_vmcss_on_cpu, cpu));
 		local_irq_enable();
 
 		/*
@@ -1000,6 +1027,7 @@ static void vmx_vcpu_load(struct kvm_vcp
 
 		rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
 		vmcs_writel(HOST_IA32_SYSENTER_ESP, sysenter_esp); /* 22.2.3 */
+		vmx->loaded_vmcs->cpu = cpu;
 	}
 }
 
@@ -1007,7 +1035,8 @@ static void vmx_vcpu_put(struct kvm_vcpu
 {
 	__vmx_load_host_state(to_vmx(vcpu));
 	if (!vmm_exclusive) {
-		__vcpu_clear(to_vmx(vcpu));
+		__loaded_vmcs_clear(to_vmx(vcpu)->loaded_vmcs);
+		vcpu->cpu = -1;
 		kvm_cpu_vmxoff();
 	}
 }
@@ -1471,7 +1500,7 @@ static int hardware_enable(void *garbage
 	if (read_cr4() & X86_CR4_VMXE)
 		return -EBUSY;
 
-	INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
+	INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
 
 	test_bits = FEATURE_CONTROL_LOCKED;
@@ -1495,14 +1524,14 @@ static int hardware_enable(void *garbage
 	return 0;
 }
 
-static void vmclear_local_vcpus(void)
+static void vmclear_local_loaded_vmcss(void)
 {
 	int cpu = raw_smp_processor_id();
-	struct vcpu_vmx *vmx, *n;
+	struct loaded_vmcs *v, *n;
 
-	list_for_each_entry_safe(vmx, n, &per_cpu(vcpus_on_cpu, cpu),
-				 local_vcpus_link)
-		__vcpu_clear(vmx);
+	list_for_each_entry_safe(v, n, &per_cpu(loaded_vmcss_on_cpu, cpu),
+				 loaded_vmcss_on_cpu_link)
+		__loaded_vmcs_clear(v);
 }
 
 
@@ -1517,7 +1546,7 @@ static void kvm_cpu_vmxoff(void)
 static void hardware_disable(void *garbage)
 {
 	if (vmm_exclusive) {
-		vmclear_local_vcpus();
+		vmclear_local_loaded_vmcss();
 		kvm_cpu_vmxoff();
 	}
 	write_cr4(read_cr4() & ~X86_CR4_VMXE);
@@ -1698,6 +1727,18 @@ static void free_vmcs(struct vmcs *vmcs)
 	free_pages((unsigned long)vmcs, vmcs_config.order);
 }
 
+/*
+ * Free a VMCS, but before that VMCLEAR it on the CPU where it was last loaded
+ */
+static void free_loaded_vmcs(struct loaded_vmcs *loaded_vmcs)
+{
+	if (!loaded_vmcs->vmcs)
+		return;
+	loaded_vmcs_clear(loaded_vmcs);
+	free_vmcs(loaded_vmcs->vmcs);
+	loaded_vmcs->vmcs = NULL;
+}
+
 static void free_kvm_area(void)
 {
 	int cpu;
@@ -4168,6 +4209,7 @@ static void __noclone vmx_vcpu_run(struc
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		vmx_set_interrupt_shadow(vcpu, 0);
 
+	vmx->__launched = vmx->loaded_vmcs->launched;
 	asm(
 		/* Store host registers */
 		"push %%"R"dx; push %%"R"bp;"
@@ -4238,7 +4280,7 @@ static void __noclone vmx_vcpu_run(struc
 		"pop  %%"R"bp; pop  %%"R"dx \n\t"
 		"setbe %c[fail](%0) \n\t"
 	      : : "c"(vmx), "d"((unsigned long)HOST_RSP),
-		[launched]"i"(offsetof(struct vcpu_vmx, launched)),
+		[launched]"i"(offsetof(struct vcpu_vmx, __launched)),
 		[fail]"i"(offsetof(struct vcpu_vmx, fail)),
 		[host_rsp]"i"(offsetof(struct vcpu_vmx, host_rsp)),
 		[rax]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RAX])),
@@ -4278,7 +4320,7 @@ static void __noclone vmx_vcpu_run(struc
 	vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
 
 	asm("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
-	vmx->launched = 1;
+	vmx->loaded_vmcs->launched = 1;
 
 	vmx->exit_reason = vmcs_read32(VM_EXIT_REASON);
 
@@ -4290,41 +4332,17 @@ static void __noclone vmx_vcpu_run(struc
 #undef R
 #undef Q
 
-static void vmx_free_vmcs(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-
-	if (vmx->vmcs) {
-		vcpu_clear(vmx);
-		free_vmcs(vmx->vmcs);
-		vmx->vmcs = NULL;
-	}
-}
-
 static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	free_vpid(vmx);
-	vmx_free_vmcs(vcpu);
+	free_loaded_vmcs(vmx->loaded_vmcs);
 	kfree(vmx->guest_msrs);
 	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, vmx);
 }
 
-static inline void vmcs_init(struct vmcs *vmcs)
-{
-	u64 phys_addr = __pa(per_cpu(vmxarea, raw_smp_processor_id()));
-
-	if (!vmm_exclusive)
-		kvm_cpu_vmxon(phys_addr);
-
-	vmcs_clear(vmcs);
-
-	if (!vmm_exclusive)
-		kvm_cpu_vmxoff();
-}
-
 static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 {
 	int err;
@@ -4346,11 +4364,15 @@ static struct kvm_vcpu *vmx_create_vcpu(
 		goto uninit_vcpu;
 	}
 
-	vmx->vmcs = alloc_vmcs();
-	if (!vmx->vmcs)
+	vmx->loaded_vmcs = &vmx->vmcs01;
+	vmx->loaded_vmcs->vmcs = alloc_vmcs();
+	if (!vmx->loaded_vmcs->vmcs)
 		goto free_msrs;
-
-	vmcs_init(vmx->vmcs);
+	if (!vmm_exclusive)
+		kvm_cpu_vmxon(__pa(per_cpu(vmxarea, raw_smp_processor_id())));
+	loaded_vmcs_init(vmx->loaded_vmcs);
+	if (!vmm_exclusive)
+		kvm_cpu_vmxoff();
 
 	cpu = get_cpu();
 	vmx_vcpu_load(&vmx->vcpu, cpu);
@@ -4379,7 +4401,7 @@ static struct kvm_vcpu *vmx_create_vcpu(
 	return &vmx->vcpu;
 
 free_vmcs:
-	free_vmcs(vmx->vmcs);
+	free_vmcs(vmx->loaded_vmcs->vmcs);
 free_msrs:
 	kfree(vmx->guest_msrs);
 uninit_vcpu:

[PATCH 02/31] nVMX: Add "nested" module option to kvm_intel

[Nadav Har'El]

This patch adds to kvm_intel a module option "nested". This option controls
whether the guest can use VMX instructions, i.e., whether we allow nested
virtualization. A similar, but separate, option already exists for the
SVM module.

This option currently defaults to 0, meaning that nested VMX must be
explicitly enabled by giving nested=1. When nested VMX matures, the default
should probably be changed to enable nested VMX by default - just like
nested SVM is currently enabled by default.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:47.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:47.000000000 +0300
@@ -74,6 +74,14 @@ module_param(vmm_exclusive, bool, S_IRUG
 static int __read_mostly yield_on_hlt = 1;
 module_param(yield_on_hlt, bool, S_IRUGO);
 
+/*
+ * If nested=1, nested virtualization is supported, i.e., guests may use
+ * VMX and be a hypervisor for its own guests. If nested=0, guests may not
+ * use VMX instructions.
+ */
+static int __read_mostly nested = 0;
+module_param(nested, bool, S_IRUGO);
+
 #define KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST				\
 	(X86_CR0_WP | X86_CR0_NE | X86_CR0_NW | X86_CR0_CD)
 #define KVM_GUEST_CR0_MASK						\
@@ -1292,6 +1300,23 @@ static u64 vmx_compute_tsc_offset(struct
 	return target_tsc - native_read_tsc();
 }
 
+static bool guest_cpuid_has_vmx(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best = kvm_find_cpuid_entry(vcpu, 1, 0);
+	return best && (best->ecx & (1 << (X86_FEATURE_VMX & 31)));
+}
+
+/*
+ * nested_vmx_allowed() checks whether a guest should be allowed to use VMX
+ * instructions and MSRs (i.e., nested VMX). Nested VMX is disabled for
+ * all guests if the "nested" module option is off, and can also be disabled
+ * for a single guest by disabling its VMX cpuid bit.
+ */
+static inline bool nested_vmx_allowed(struct kvm_vcpu *vcpu)
+{
+	return nested && guest_cpuid_has_vmx(vcpu);
+}
+
 /*
  * Reads an msr value (of 'msr_index') into 'pdata'.
  * Returns 0 on success, non-0 otherwise.

[PATCH 03/31] nVMX: Implement VMXON and VMXOFF

[Nadav Har'El]

This patch allows a guest to use the VMXON and VMXOFF instructions, and
emulates them accordingly. Basically this amounts to checking some
prerequisites, and then remembering whether the guest has enabled or disabled
VMX operation.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |  110 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 108 insertions(+), 2 deletions(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:48.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:48.000000000 +0300
@@ -144,6 +144,15 @@ struct shared_msr_entry {
 	u64 mask;
 };
 
+/*
+ * The nested_vmx structure is part of vcpu_vmx, and holds information we need
+ * for correct emulation of VMX (i.e., nested VMX) on this vcpu.
+ */
+struct nested_vmx {
+	/* Has the level1 guest done vmxon? */
+	bool vmxon;
+};
+
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
 	unsigned long         host_rsp;
@@ -203,6 +212,9 @@ struct vcpu_vmx {
 	u32 exit_reason;
 
 	bool rdtscp_enabled;
+
+	/* Support for a guest hypervisor (nested VMX) */
+	struct nested_vmx nested;
 };
 
 enum segment_cache_field {
@@ -3933,6 +3945,99 @@ static int handle_invalid_op(struct kvm_
 }
 
 /*
+ * Emulate the VMXON instruction.
+ * Currently, we just remember that VMX is active, and do not save or even
+ * inspect the argument to VMXON (the so-called "VMXON pointer") because we
+ * do not currently need to store anything in that guest-allocated memory
+ * region. Consequently, VMCLEAR and VMPTRLD also do not verify that the their
+ * argument is different from the VMXON pointer (which the spec says they do).
+ */
+static int handle_vmon(struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment cs;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	/* The Intel VMX Instruction Reference lists a bunch of bits that
+	 * are prerequisite to running VMXON, most notably cr4.VMXE must be
+	 * set to 1 (see vmx_set_cr4() for when we allow the guest to set this).
+	 * Otherwise, we should fail with #UD. We test these now:
+	 */
+	if (!kvm_read_cr4_bits(vcpu, X86_CR4_VMXE) ||
+	    !kvm_read_cr0_bits(vcpu, X86_CR0_PE) ||
+	    (vmx_get_rflags(vcpu) & X86_EFLAGS_VM)) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 1;
+	}
+
+	vmx_get_segment(vcpu, &cs, VCPU_SREG_CS);
+	if (is_long_mode(vcpu) && !cs.l) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 1;
+	}
+
+	if (vmx_get_cpl(vcpu)) {
+		kvm_inject_gp(vcpu, 0);
+		return 1;
+	}
+
+	vmx->nested.vmxon = true;
+
+	skip_emulated_instruction(vcpu);
+	return 1;
+}
+
+/*
+ * Intel's VMX Instruction Reference specifies a common set of prerequisites
+ * for running VMX instructions (except VMXON, whose prerequisites are
+ * slightly different). It also specifies what exception to inject otherwise.
+ */
+static int nested_vmx_check_permission(struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment cs;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	if (!vmx->nested.vmxon) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 0;
+	}
+
+	vmx_get_segment(vcpu, &cs, VCPU_SREG_CS);
+	if ((vmx_get_rflags(vcpu) & X86_EFLAGS_VM) ||
+	    (is_long_mode(vcpu) && !cs.l)) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 0;
+	}
+
+	if (vmx_get_cpl(vcpu)) {
+		kvm_inject_gp(vcpu, 0);
+		return 0;
+	}
+
+	return 1;
+}
+
+/*
+ * Free whatever needs to be freed from vmx->nested when L1 goes down, or
+ * just stops using VMX.
+ */
+static void free_nested(struct vcpu_vmx *vmx)
+{
+	if (!vmx->nested.vmxon)
+		return;
+	vmx->nested.vmxon = false;
+}
+
+/* Emulate the VMXOFF instruction */
+static int handle_vmoff(struct kvm_vcpu *vcpu)
+{
+	if (!nested_vmx_check_permission(vcpu))
+		return 1;
+	free_nested(to_vmx(vcpu));
+	skip_emulated_instruction(vcpu);
+	return 1;
+}
+
+/*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
  * to be done to userspace and return 0.
@@ -3960,8 +4065,8 @@ static int (*kvm_vmx_exit_handlers[])(st
 	[EXIT_REASON_VMREAD]                  = handle_vmx_insn,
 	[EXIT_REASON_VMRESUME]                = handle_vmx_insn,
 	[EXIT_REASON_VMWRITE]                 = handle_vmx_insn,
-	[EXIT_REASON_VMOFF]                   = handle_vmx_insn,
-	[EXIT_REASON_VMON]                    = handle_vmx_insn,
+	[EXIT_REASON_VMOFF]                   = handle_vmoff,
+	[EXIT_REASON_VMON]                    = handle_vmon,
 	[EXIT_REASON_TPR_BELOW_THRESHOLD]     = handle_tpr_below_threshold,
 	[EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
 	[EXIT_REASON_WBINVD]                  = handle_wbinvd,
@@ -4362,6 +4467,7 @@ static void vmx_free_vcpu(struct kvm_vcp
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	free_vpid(vmx);
+	free_nested(vmx);
 	free_loaded_vmcs(vmx->loaded_vmcs);
 	kfree(vmx->guest_msrs);
 	kvm_vcpu_uninit(vcpu);

[PATCH 04/31] nVMX: Allow setting the VMXE bit in CR4

[Nadav Har'El]

This patch allows the guest to enable the VMXE bit in CR4, which is a
prerequisite to running VMXON.

Whether to allow setting the VMXE bit now depends on the architecture (svm
or vmx), so its checking has moved to kvm_x86_ops->set_cr4(). This function
now returns an int: If kvm_x86_ops->set_cr4() returns 1, __kvm_set_cr4()
will also return 1, and this will cause kvm_set_cr4() will throw a #GP.

Turning on the VMXE bit is allowed only when the nested VMX feature is
enabled, and turning it off is forbidden after a vmxon.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/include/asm/kvm_host.h |    2 +-
 arch/x86/kvm/svm.c              |    6 +++++-
 arch/x86/kvm/vmx.c              |   17 +++++++++++++++--
 arch/x86/kvm/x86.c              |    4 +---
 4 files changed, 22 insertions(+), 7 deletions(-)

--- .before/arch/x86/include/asm/kvm_host.h	2011-05-25 22:40:48.000000000 +0300
+++ .after/arch/x86/include/asm/kvm_host.h	2011-05-25 22:40:48.000000000 +0300
@@ -555,7 +555,7 @@ struct kvm_x86_ops {
 	void (*decache_cr4_guest_bits)(struct kvm_vcpu *vcpu);
 	void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
 	void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
-	void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
+	int (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
 	void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
 	void (*get_idt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
 	void (*set_idt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
--- .before/arch/x86/kvm/svm.c	2011-05-25 22:40:48.000000000 +0300
+++ .after/arch/x86/kvm/svm.c	2011-05-25 22:40:48.000000000 +0300
@@ -1496,11 +1496,14 @@ static void svm_set_cr0(struct kvm_vcpu 
 	update_cr0_intercept(svm);
 }
 
-static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+static int svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
 	unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
 
+	if (cr4 & X86_CR4_VMXE)
+		return 1;
+
 	if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
 		svm_flush_tlb(vcpu);
 
@@ -1510,6 +1513,7 @@ static void svm_set_cr4(struct kvm_vcpu 
 	cr4 |= host_cr4_mce;
 	to_svm(vcpu)->vmcb->save.cr4 = cr4;
 	mark_dirty(to_svm(vcpu)->vmcb, VMCB_CR);
+	return 0;
 }
 
 static void svm_set_segment(struct kvm_vcpu *vcpu,
--- .before/arch/x86/kvm/x86.c	2011-05-25 22:40:48.000000000 +0300
+++ .after/arch/x86/kvm/x86.c	2011-05-25 22:40:48.000000000 +0300
@@ -615,11 +615,9 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, u
 				   kvm_read_cr3(vcpu)))
 		return 1;
 
-	if (cr4 & X86_CR4_VMXE)
+	if (kvm_x86_ops->set_cr4(vcpu, cr4))
 		return 1;
 
-	kvm_x86_ops->set_cr4(vcpu, cr4);
-
 	if ((cr4 ^ old_cr4) & pdptr_bits)
 		kvm_mmu_reset_context(vcpu);
 
--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:48.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:49.000000000 +0300
@@ -2121,7 +2121,7 @@ static void ept_save_pdptrs(struct kvm_v
 		  (unsigned long *)&vcpu->arch.regs_dirty);
 }
 
-static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
+static int vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
 
 static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 					unsigned long cr0,
@@ -2218,11 +2218,23 @@ static void vmx_set_cr3(struct kvm_vcpu 
 	vmcs_writel(GUEST_CR3, guest_cr3);
 }
 
-static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+static int vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long hw_cr4 = cr4 | (to_vmx(vcpu)->rmode.vm86_active ?
 		    KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON);
 
+	if (cr4 & X86_CR4_VMXE) {
+		/*
+		 * To use VMXON (and later other VMX instructions), a guest
+		 * must first be able to turn on cr4.VMXE (see handle_vmon()).
+		 * So basically the check on whether to allow nested VMX
+		 * is here.
+		 */
+		if (!nested_vmx_allowed(vcpu))
+			return 1;
+	} else if (to_vmx(vcpu)->nested.vmxon)
+		return 1;
+
 	vcpu->arch.cr4 = cr4;
 	if (enable_ept) {
 		if (!is_paging(vcpu)) {
@@ -2235,6 +2247,7 @@ static void vmx_set_cr4(struct kvm_vcpu 
 
 	vmcs_writel(CR4_READ_SHADOW, cr4);
 	vmcs_writel(GUEST_CR4, hw_cr4);
+	return 0;
 }
 
 static void vmx_get_segment(struct kvm_vcpu *vcpu,

[PATCH 05/31] nVMX: Introduce vmcs12: a VMCS structure for L1

[Nadav Har'El]

An implementation of VMX needs to define a VMCS structure. This structure
is kept in guest memory, but is opaque to the guest (who can only read or
write it with VMX instructions).

This patch starts to define the VMCS structure which our nested VMX
implementation will present to L1. We call it "vmcs12", as it is the VMCS
that L1 keeps for its L2 guest. We will add more content to this structure
in later patches.

This patch also adds the notion (as required by the VMX spec) of L1's "current
VMCS", and finally includes utility functions for mapping the guest-allocated
VMCSs in host memory.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   75 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:50.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:50.000000000 +0300
@@ -145,12 +145,53 @@ struct shared_msr_entry {
 };
 
 /*
+ * struct vmcs12 describes the state that our guest hypervisor (L1) keeps for a
+ * single nested guest (L2), hence the name vmcs12. Any VMX implementation has
+ * a VMCS structure, and vmcs12 is our emulated VMX's VMCS. This structure is
+ * stored in guest memory specified by VMPTRLD, but is opaque to the guest,
+ * which must access it using VMREAD/VMWRITE/VMCLEAR instructions.
+ * More than one of these structures may exist, if L1 runs multiple L2 guests.
+ * nested_vmx_run() will use the data here to build a vmcs02: a VMCS for the
+ * underlying hardware which will be used to run L2.
+ * This structure is packed to ensure that its layout is identical across
+ * machines (necessary for live migration).
+ * If there are changes in this struct, VMCS12_REVISION must be changed.
+ */
+struct __packed vmcs12 {
+	/* According to the Intel spec, a VMCS region must start with the
+	 * following two fields. Then follow implementation-specific data.
+	 */
+	u32 revision_id;
+	u32 abort;
+};
+
+/*
+ * VMCS12_REVISION is an arbitrary id that should be changed if the content or
+ * layout of struct vmcs12 is changed. MSR_IA32_VMX_BASIC returns this id, and
+ * VMPTRLD verifies that the VMCS region that L1 is loading contains this id.
+ */
+#define VMCS12_REVISION 0x11e57ed0
+
+/*
+ * VMCS12_SIZE is the number of bytes L1 should allocate for the VMXON region
+ * and any VMCS region. Although only sizeof(struct vmcs12) are used by the
+ * current implementation, 4K are reserved to avoid future complications.
+ */
+#define VMCS12_SIZE 0x1000
+
+/*
  * The nested_vmx structure is part of vcpu_vmx, and holds information we need
  * for correct emulation of VMX (i.e., nested VMX) on this vcpu.
  */
 struct nested_vmx {
 	/* Has the level1 guest done vmxon? */
 	bool vmxon;
+
+	/* The guest-physical address of the current VMCS L1 keeps for L2 */
+	gpa_t current_vmptr;
+	/* The host-usable pointer to the above */
+	struct page *current_vmcs12_page;
+	struct vmcs12 *current_vmcs12;
 };
 
 struct vcpu_vmx {
@@ -231,6 +272,31 @@ static inline struct vcpu_vmx *to_vmx(st
 	return container_of(vcpu, struct vcpu_vmx, vcpu);
 }
 
+static inline struct vmcs12 *get_vmcs12(struct kvm_vcpu *vcpu)
+{
+	return to_vmx(vcpu)->nested.current_vmcs12;
+}
+
+static struct page *nested_get_page(struct kvm_vcpu *vcpu, gpa_t addr)
+{
+	struct page *page = gfn_to_page(vcpu->kvm, addr >> PAGE_SHIFT);
+	if (is_error_page(page)) {
+		kvm_release_page_clean(page);
+		return NULL;
+	}
+	return page;
+}
+
+static void nested_release_page(struct page *page)
+{
+	kvm_release_page_dirty(page);
+}
+
+static void nested_release_page_clean(struct page *page)
+{
+	kvm_release_page_clean(page);
+}
+
 static u64 construct_eptp(unsigned long root_hpa);
 static void kvm_cpu_vmxon(u64 addr);
 static void kvm_cpu_vmxoff(void);
@@ -4038,6 +4104,12 @@ static void free_nested(struct vcpu_vmx 
 	if (!vmx->nested.vmxon)
 		return;
 	vmx->nested.vmxon = false;
+	if (vmx->nested.current_vmptr != -1ull) {
+		kunmap(vmx->nested.current_vmcs12_page);
+		nested_release_page(vmx->nested.current_vmcs12_page);
+		vmx->nested.current_vmptr = -1ull;
+		vmx->nested.current_vmcs12 = NULL;
+	}
 }
 
 /* Emulate the VMXOFF instruction */
@@ -4542,6 +4614,9 @@ static struct kvm_vcpu *vmx_create_vcpu(
 			goto free_vmcs;
 	}
 
+	vmx->nested.current_vmptr = -1ull;
+	vmx->nested.current_vmcs12 = NULL;
+
 	return &vmx->vcpu;
 
 free_vmcs:

[PATCH 06/31] nVMX: Implement reading and writing of VMX MSRs

[Nadav Har'El]

When the guest can use VMX instructions (when the "nested" module option is
on), it should also be able to read and write VMX MSRs, e.g., to query about
VMX capabilities. This patch adds this support.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/include/asm/msr-index.h |   12 +
 arch/x86/kvm/vmx.c               |  219 +++++++++++++++++++++++++++++
 2 files changed, 231 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:50.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:50.000000000 +0300
@@ -1396,6 +1396,218 @@ static inline bool nested_vmx_allowed(st
 }
 
 /*
+ * nested_vmx_setup_ctls_msrs() sets up variables containing the values to be
+ * returned for the various VMX controls MSRs when nested VMX is enabled.
+ * The same values should also be used to verify that vmcs12 control fields are
+ * valid during nested entry from L1 to L2.
+ * Each of these control msrs has a low and high 32-bit half: A low bit is on
+ * if the corresponding bit in the (32-bit) control field *must* be on, and a
+ * bit in the high half is on if the corresponding bit in the control field
+ * may be on. See also vmx_control_verify().
+ * TODO: allow these variables to be modified (downgraded) by module options
+ * or other means.
+ */
+static u32 nested_vmx_procbased_ctls_low, nested_vmx_procbased_ctls_high;
+static u32 nested_vmx_secondary_ctls_low, nested_vmx_secondary_ctls_high;
+static u32 nested_vmx_pinbased_ctls_low, nested_vmx_pinbased_ctls_high;
+static u32 nested_vmx_exit_ctls_low, nested_vmx_exit_ctls_high;
+static u32 nested_vmx_entry_ctls_low, nested_vmx_entry_ctls_high;
+static __init void nested_vmx_setup_ctls_msrs(void)
+{
+	/*
+	 * Note that as a general rule, the high half of the MSRs (bits in
+	 * the control fields which may be 1) should be initialized by the
+	 * intersection of the underlying hardware's MSR (i.e., features which
+	 * can be supported) and the list of features we want to expose -
+	 * because they are known to be properly supported in our code.
+	 * Also, usually, the low half of the MSRs (bits which must be 1) can
+	 * be set to 0, meaning that L1 may turn off any of these bits. The
+	 * reason is that if one of these bits is necessary, it will appear
+	 * in vmcs01 and prepare_vmcs02, when it bitwise-or's the control
+	 * fields of vmcs01 and vmcs02, will turn these bits off - and
+	 * nested_vmx_exit_handled() will not pass related exits to L1.
+	 * These rules have exceptions below.
+	 */
+
+	/* pin-based controls */
+	/*
+	 * According to the Intel spec, if bit 55 of VMX_BASIC is off (as it is
+	 * in our case), bits 1, 2 and 4 (i.e., 0x16) must be 1 in this MSR.
+	 */
+	nested_vmx_pinbased_ctls_low = 0x16 ;
+	nested_vmx_pinbased_ctls_high = 0x16 |
+		PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING |
+		PIN_BASED_VIRTUAL_NMIS;
+
+	/* exit controls */
+	nested_vmx_exit_ctls_low = 0;
+#ifdef CONFIG_X86_64
+	nested_vmx_exit_ctls_high = VM_EXIT_HOST_ADDR_SPACE_SIZE;
+#else
+	nested_vmx_exit_ctls_high = 0;
+#endif
+
+	/* entry controls */
+	rdmsr(MSR_IA32_VMX_ENTRY_CTLS,
+		nested_vmx_entry_ctls_low, nested_vmx_entry_ctls_high);
+	nested_vmx_entry_ctls_low = 0;
+	nested_vmx_entry_ctls_high &=
+		VM_ENTRY_LOAD_IA32_PAT | VM_ENTRY_IA32E_MODE;
+
+	/* cpu-based controls */
+	rdmsr(MSR_IA32_VMX_PROCBASED_CTLS,
+		nested_vmx_procbased_ctls_low, nested_vmx_procbased_ctls_high);
+	nested_vmx_procbased_ctls_low = 0;
+	nested_vmx_procbased_ctls_high &=
+		CPU_BASED_VIRTUAL_INTR_PENDING | CPU_BASED_USE_TSC_OFFSETING |
+		CPU_BASED_HLT_EXITING | CPU_BASED_INVLPG_EXITING |
+		CPU_BASED_MWAIT_EXITING | CPU_BASED_CR3_LOAD_EXITING |
+		CPU_BASED_CR3_STORE_EXITING |
+#ifdef CONFIG_X86_64
+		CPU_BASED_CR8_LOAD_EXITING | CPU_BASED_CR8_STORE_EXITING |
+#endif
+		CPU_BASED_MOV_DR_EXITING | CPU_BASED_UNCOND_IO_EXITING |
+		CPU_BASED_USE_IO_BITMAPS | CPU_BASED_MONITOR_EXITING |
+		CPU_BASED_ACTIVATE_SECONDARY_CONTROLS;
+	/*
+	 * We can allow some features even when not supported by the
+	 * hardware. For example, L1 can specify an MSR bitmap - and we
+	 * can use it to avoid exits to L1 - even when L0 runs L2
+	 * without MSR bitmaps.
+	 */
+	nested_vmx_procbased_ctls_high |= CPU_BASED_USE_MSR_BITMAPS;
+
+	/* secondary cpu-based controls */
+	rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2,
+		nested_vmx_secondary_ctls_low, nested_vmx_secondary_ctls_high);
+	nested_vmx_secondary_ctls_low = 0;
+	nested_vmx_secondary_ctls_high &=
+		SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
+}
+
+static inline bool vmx_control_verify(u32 control, u32 low, u32 high)
+{
+	/*
+	 * Bits 0 in high must be 0, and bits 1 in low must be 1.
+	 */
+	return ((control & high) | low) == control;
+}
+
+static inline u64 vmx_control_msr(u32 low, u32 high)
+{
+	return low | ((u64)high << 32);
+}
+
+/*
+ * If we allow our guest to use VMX instructions (i.e., nested VMX), we should
+ * also let it use VMX-specific MSRs.
+ * vmx_get_vmx_msr() and vmx_set_vmx_msr() return 1 when we handled a
+ * VMX-specific MSR, or 0 when we haven't (and the caller should handle it
+ * like all other MSRs).
+ */
+static int vmx_get_vmx_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
+{
+	if (!nested_vmx_allowed(vcpu) && msr_index >= MSR_IA32_VMX_BASIC &&
+		     msr_index <= MSR_IA32_VMX_TRUE_ENTRY_CTLS) {
+		/*
+		 * According to the spec, processors which do not support VMX
+		 * should throw a #GP(0) when VMX capability MSRs are read.
+		 */
+		kvm_queue_exception_e(vcpu, GP_VECTOR, 0);
+		return 1;
+	}
+
+	switch (msr_index) {
+	case MSR_IA32_FEATURE_CONTROL:
+		*pdata = 0;
+		break;
+	case MSR_IA32_VMX_BASIC:
+		/*
+		 * This MSR reports some information about VMX support. We
+		 * should return information about the VMX we emulate for the
+		 * guest, and the VMCS structure we give it - not about the
+		 * VMX support of the underlying hardware.
+		 */
+		*pdata = VMCS12_REVISION |
+			   ((u64)VMCS12_SIZE << VMX_BASIC_VMCS_SIZE_SHIFT) |
+			   (VMX_BASIC_MEM_TYPE_WB << VMX_BASIC_MEM_TYPE_SHIFT);
+		break;
+	case MSR_IA32_VMX_TRUE_PINBASED_CTLS:
+	case MSR_IA32_VMX_PINBASED_CTLS:
+		*pdata = vmx_control_msr(nested_vmx_pinbased_ctls_low,
+					nested_vmx_pinbased_ctls_high);
+		break;
+	case MSR_IA32_VMX_TRUE_PROCBASED_CTLS:
+	case MSR_IA32_VMX_PROCBASED_CTLS:
+		*pdata = vmx_control_msr(nested_vmx_procbased_ctls_low,
+					nested_vmx_procbased_ctls_high);
+		break;
+	case MSR_IA32_VMX_TRUE_EXIT_CTLS:
+	case MSR_IA32_VMX_EXIT_CTLS:
+		*pdata = vmx_control_msr(nested_vmx_exit_ctls_low,
+					nested_vmx_exit_ctls_high);
+		break;
+	case MSR_IA32_VMX_TRUE_ENTRY_CTLS:
+	case MSR_IA32_VMX_ENTRY_CTLS:
+		*pdata = vmx_control_msr(nested_vmx_entry_ctls_low,
+					nested_vmx_entry_ctls_high);
+		break;
+	case MSR_IA32_VMX_MISC:
+		*pdata = 0;
+		break;
+	/*
+	 * These MSRs specify bits which the guest must keep fixed (on or off)
+	 * while L1 is in VMXON mode (in L1's root mode, or running an L2).
+	 * We picked the standard core2 setting.
+	 */
+#define VMXON_CR0_ALWAYSON	(X86_CR0_PE | X86_CR0_PG | X86_CR0_NE)
+#define VMXON_CR4_ALWAYSON	X86_CR4_VMXE
+	case MSR_IA32_VMX_CR0_FIXED0:
+		*pdata = VMXON_CR0_ALWAYSON;
+		break;
+	case MSR_IA32_VMX_CR0_FIXED1:
+		*pdata = -1ULL;
+		break;
+	case MSR_IA32_VMX_CR4_FIXED0:
+		*pdata = VMXON_CR4_ALWAYSON;
+		break;
+	case MSR_IA32_VMX_CR4_FIXED1:
+		*pdata = -1ULL;
+		break;
+	case MSR_IA32_VMX_VMCS_ENUM:
+		*pdata = 0x1f;
+		break;
+	case MSR_IA32_VMX_PROCBASED_CTLS2:
+		*pdata = vmx_control_msr(nested_vmx_secondary_ctls_low,
+					nested_vmx_secondary_ctls_high);
+		break;
+	case MSR_IA32_VMX_EPT_VPID_CAP:
+		/* Currently, no nested ept or nested vpid */
+		*pdata = 0;
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+static int vmx_set_vmx_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
+{
+	if (!nested_vmx_allowed(vcpu))
+		return 0;
+
+	if (msr_index == MSR_IA32_FEATURE_CONTROL)
+		/* TODO: the right thing. */
+		return 1;
+	/*
+	 * No need to treat VMX capability MSRs specially: If we don't handle
+	 * them, handle_wrmsr will #GP(0), which is correct (they are readonly)
+	 */
+	return 0;
+}
+
+/*
  * Reads an msr value (of 'msr_index') into 'pdata'.
  * Returns 0 on success, non-0 otherwise.
  * Assumes vcpu_load() was already called.
@@ -1443,6 +1655,8 @@ static int vmx_get_msr(struct kvm_vcpu *
 		/* Otherwise falls through */
 	default:
 		vmx_load_host_state(to_vmx(vcpu));
+		if (vmx_get_vmx_msr(vcpu, msr_index, pdata))
+			return 0;
 		msr = find_msr_entry(to_vmx(vcpu), msr_index);
 		if (msr) {
 			vmx_load_host_state(to_vmx(vcpu));
@@ -1514,6 +1728,8 @@ static int vmx_set_msr(struct kvm_vcpu *
 			return 1;
 		/* Otherwise falls through */
 	default:
+		if (vmx_set_vmx_msr(vcpu, msr_index, data))
+			break;
 		msr = find_msr_entry(vmx, msr_index);
 		if (msr) {
 			vmx_load_host_state(vmx);
@@ -1902,6 +2118,9 @@ static __init int hardware_setup(void)
 	if (!cpu_has_vmx_ple())
 		ple_gap = 0;
 
+	if (nested)
+		nested_vmx_setup_ctls_msrs();
+
 	return alloc_kvm_area();
 }
 
--- .before/arch/x86/include/asm/msr-index.h	2011-05-25 22:40:50.000000000 +0300
+++ .after/arch/x86/include/asm/msr-index.h	2011-05-25 22:40:50.000000000 +0300
@@ -438,6 +438,18 @@
 #define MSR_IA32_VMX_VMCS_ENUM          0x0000048a
 #define MSR_IA32_VMX_PROCBASED_CTLS2    0x0000048b
 #define MSR_IA32_VMX_EPT_VPID_CAP       0x0000048c
+#define MSR_IA32_VMX_TRUE_PINBASED_CTLS  0x0000048d
+#define MSR_IA32_VMX_TRUE_PROCBASED_CTLS 0x0000048e
+#define MSR_IA32_VMX_TRUE_EXIT_CTLS      0x0000048f
+#define MSR_IA32_VMX_TRUE_ENTRY_CTLS     0x00000490
+
+/* VMX_BASIC bits and bitmasks */
+#define VMX_BASIC_VMCS_SIZE_SHIFT	32
+#define VMX_BASIC_64		0x0001000000000000LLU
+#define VMX_BASIC_MEM_TYPE_SHIFT	50
+#define VMX_BASIC_MEM_TYPE_MASK	0x003c000000000000LLU
+#define VMX_BASIC_MEM_TYPE_WB	6LLU
+#define VMX_BASIC_INOUT		0x0040000000000000LLU
 
 /* AMD-V MSRs */
 

[PATCH 07/31] nVMX: Decoding memory operands of VMX instructions

[Nadav Har'El]

This patch includes a utility function for decoding pointer operands of VMX
instructions issued by L1 (a guest hypervisor)

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   53 +++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kvm/x86.c |    3 +-
 arch/x86/kvm/x86.h |    4 +++
 3 files changed, 59 insertions(+), 1 deletion(-)

--- .before/arch/x86/kvm/x86.c	2011-05-25 22:40:52.000000000 +0300
+++ .after/arch/x86/kvm/x86.c	2011-05-25 22:40:52.000000000 +0300
@@ -3848,7 +3848,7 @@ static int kvm_fetch_guest_virt(struct x
 					  exception);
 }
 
-static int kvm_read_guest_virt(struct x86_emulate_ctxt *ctxt,
+int kvm_read_guest_virt(struct x86_emulate_ctxt *ctxt,
 			       gva_t addr, void *val, unsigned int bytes,
 			       struct x86_exception *exception)
 {
@@ -3858,6 +3858,7 @@ static int kvm_read_guest_virt(struct x8
 	return kvm_read_guest_virt_helper(addr, val, bytes, vcpu, access,
 					  exception);
 }
+EXPORT_SYMBOL_GPL(kvm_read_guest_virt);
 
 static int kvm_read_guest_virt_system(struct x86_emulate_ctxt *ctxt,
 				      gva_t addr, void *val, unsigned int bytes,
--- .before/arch/x86/kvm/x86.h	2011-05-25 22:40:52.000000000 +0300
+++ .after/arch/x86/kvm/x86.h	2011-05-25 22:40:52.000000000 +0300
@@ -81,4 +81,8 @@ int kvm_inject_realmode_interrupt(struct
 
 void kvm_write_tsc(struct kvm_vcpu *vcpu, u64 data);
 
+int kvm_read_guest_virt(struct x86_emulate_ctxt *ctxt,
+	gva_t addr, void *val, unsigned int bytes,
+	struct x86_exception *exception);
+
 #endif
--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:52.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:52.000000000 +0300
@@ -4342,6 +4342,59 @@ static int handle_vmoff(struct kvm_vcpu 
 }
 
 /*
+ * Decode the memory-address operand of a vmx instruction, as recorded on an
+ * exit caused by such an instruction (run by a guest hypervisor).
+ * On success, returns 0. When the operand is invalid, returns 1 and throws
+ * #UD or #GP.
+ */
+static int get_vmx_mem_address(struct kvm_vcpu *vcpu,
+				 unsigned long exit_qualification,
+				 u32 vmx_instruction_info, gva_t *ret)
+{
+	/*
+	 * According to Vol. 3B, "Information for VM Exits Due to Instruction
+	 * Execution", on an exit, vmx_instruction_info holds most of the
+	 * addressing components of the operand. Only the displacement part
+	 * is put in exit_qualification (see 3B, "Basic VM-Exit Information").
+	 * For how an actual address is calculated from all these components,
+	 * refer to Vol. 1, "Operand Addressing".
+	 */
+	int  scaling = vmx_instruction_info & 3;
+	int  addr_size = (vmx_instruction_info >> 7) & 7;
+	bool is_reg = vmx_instruction_info & (1u << 10);
+	int  seg_reg = (vmx_instruction_info >> 15) & 7;
+	int  index_reg = (vmx_instruction_info >> 18) & 0xf;
+	bool index_is_valid = !(vmx_instruction_info & (1u << 22));
+	int  base_reg       = (vmx_instruction_info >> 23) & 0xf;
+	bool base_is_valid  = !(vmx_instruction_info & (1u << 27));
+
+	if (is_reg) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 1;
+	}
+
+	/* Addr = segment_base + offset */
+	/* offset = base + [index * scale] + displacement */
+	*ret = vmx_get_segment_base(vcpu, seg_reg);
+	if (base_is_valid)
+		*ret += kvm_register_read(vcpu, base_reg);
+	if (index_is_valid)
+		*ret += kvm_register_read(vcpu, index_reg)<<scaling;
+	*ret += exit_qualification; /* holds the displacement */
+
+	if (addr_size == 1) /* 32 bit */
+		*ret &= 0xffffffff;
+
+	/*
+	 * TODO: throw #GP (and return 1) in various cases that the VM*
+	 * instructions require it - e.g., offset beyond segment limit,
+	 * unusable or unreadable/unwritable segment, non-canonical 64-bit
+	 * address, and so on. Currently these are not checked.
+	 */
+	return 0;
+}
+
+/*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
  * to be done to userspace and return 0.

[PATCH 08/31] nVMX: Introduce vmcs02: VMCS used to run L2

[Nadav Har'El]

We saw in a previous patch that L1 controls its L2 guest with a vcms12.
L0 needs to create a real VMCS for running L2. We call that "vmcs02".
A later patch will contain the code, prepare_vmcs02(), for filling the vmcs02
fields. This patch only contains code for allocating vmcs02.

In this version, prepare_vmcs02() sets *all* of vmcs02's fields each time we
enter from L1 to L2, so keeping just one vmcs02 for the vcpu is enough: It can
be reused even when L1 runs multiple L2 guests. However, in future versions
we'll probably want to add an optimization where vmcs02 fields that rarely
change will not be set each time. For that, we may want to keep around several
vmcs02s of L2 guests that have recently run, so that potentially we could run
these L2s again more quickly because less vmwrites to vmcs02 will be needed.

This patch adds to each vcpu a vmcs02 pool, vmx->nested.vmcs02_pool,
which remembers the vmcs02s last used to run up to VMCS02_POOL_SIZE L2s.
As explained above, in the current version we choose VMCS02_POOL_SIZE=1,
I.e., one vmcs02 is allocated (and loaded onto the processor), and it is
reused to enter any L2 guest. In the future, when prepare_vmcs02() is
optimized not to set all fields every time, VMCS02_POOL_SIZE should be
increased.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |  100 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:53.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:53.000000000 +0300
@@ -119,6 +119,7 @@ static int ple_window = KVM_VMX_DEFAULT_
 module_param(ple_window, int, S_IRUGO);
 
 #define NR_AUTOLOAD_MSRS 1
+#define VMCS02_POOL_SIZE 1
 
 struct vmcs {
 	u32 revision_id;
@@ -179,6 +180,13 @@ struct __packed vmcs12 {
  */
 #define VMCS12_SIZE 0x1000
 
+/* Used to remember the last vmcs02 used for some recently used vmcs12s */
+struct vmcs02_list {
+	struct list_head list;
+	gpa_t vmptr;
+	struct loaded_vmcs vmcs02;
+};
+
 /*
  * The nested_vmx structure is part of vcpu_vmx, and holds information we need
  * for correct emulation of VMX (i.e., nested VMX) on this vcpu.
@@ -192,6 +200,10 @@ struct nested_vmx {
 	/* The host-usable pointer to the above */
 	struct page *current_vmcs12_page;
 	struct vmcs12 *current_vmcs12;
+
+	/* vmcs02_list cache of VMCSs recently used to run L2 guests */
+	struct list_head vmcs02_pool;
+	int vmcs02_num;
 };
 
 struct vcpu_vmx {
@@ -4243,6 +4255,89 @@ static int handle_invalid_op(struct kvm_
 }
 
 /*
+ * To run an L2 guest, we need a vmcs02 based on the L1-specified vmcs12.
+ * We could reuse a single VMCS for all the L2 guests, but we also want the
+ * option to allocate a separate vmcs02 for each separate loaded vmcs12 - this
+ * allows keeping them loaded on the processor, and in the future will allow
+ * optimizations where prepare_vmcs02 doesn't need to set all the fields on
+ * every entry if they never change.
+ * So we keep, in vmx->nested.vmcs02_pool, a cache of size VMCS02_POOL_SIZE
+ * (>=0) with a vmcs02 for each recently loaded vmcs12s, most recent first.
+ *
+ * The following functions allocate and free a vmcs02 in this pool.
+ */
+
+/* Get a VMCS from the pool to use as vmcs02 for the current vmcs12. */
+static struct loaded_vmcs *nested_get_current_vmcs02(struct vcpu_vmx *vmx)
+{
+	struct vmcs02_list *item;
+	list_for_each_entry(item, &vmx->nested.vmcs02_pool, list)
+		if (item->vmptr == vmx->nested.current_vmptr) {
+			list_move(&item->list, &vmx->nested.vmcs02_pool);
+			return &item->vmcs02;
+		}
+
+	if (vmx->nested.vmcs02_num >= max(VMCS02_POOL_SIZE, 1)) {
+		/* Recycle the least recently used VMCS. */
+		item = list_entry(vmx->nested.vmcs02_pool.prev,
+			struct vmcs02_list, list);
+		item->vmptr = vmx->nested.current_vmptr;
+		list_move(&item->list, &vmx->nested.vmcs02_pool);
+		return &item->vmcs02;
+	}
+
+	/* Create a new VMCS */
+	item = (struct vmcs02_list *)
+		kmalloc(sizeof(struct vmcs02_list), GFP_KERNEL);
+	if (!item)
+		return NULL;
+	item->vmcs02.vmcs = alloc_vmcs();
+	if (!item->vmcs02.vmcs) {
+		kfree(item);
+		return NULL;
+	}
+	loaded_vmcs_init(&item->vmcs02);
+	item->vmptr = vmx->nested.current_vmptr;
+	list_add(&(item->list), &(vmx->nested.vmcs02_pool));
+	vmx->nested.vmcs02_num++;
+	return &item->vmcs02;
+}
+
+/* Free and remove from pool a vmcs02 saved for a vmcs12 (if there is one) */
+static void nested_free_vmcs02(struct vcpu_vmx *vmx, gpa_t vmptr)
+{
+	struct vmcs02_list *item;
+	list_for_each_entry(item, &vmx->nested.vmcs02_pool, list)
+		if (item->vmptr == vmptr) {
+			free_loaded_vmcs(&item->vmcs02);
+			list_del(&item->list);
+			kfree(item);
+			vmx->nested.vmcs02_num--;
+			return;
+		}
+}
+
+/*
+ * Free all VMCSs saved for this vcpu, except the one pointed by
+ * vmx->loaded_vmcs. These include the VMCSs in vmcs02_pool (except the one
+ * currently used, if running L2), and vmcs01 when running L2.
+ */
+static void nested_free_all_saved_vmcss(struct vcpu_vmx *vmx)
+{
+	struct vmcs02_list *item, *n;
+	list_for_each_entry_safe(item, n, &vmx->nested.vmcs02_pool, list) {
+		if (vmx->loaded_vmcs != &item->vmcs02)
+			free_loaded_vmcs(&item->vmcs02);
+		list_del(&item->list);
+		kfree(item);
+	}
+	vmx->nested.vmcs02_num = 0;
+
+	if (vmx->loaded_vmcs != &vmx->vmcs01)
+		free_loaded_vmcs(&vmx->vmcs01);
+}
+
+/*
  * Emulate the VMXON instruction.
  * Currently, we just remember that VMX is active, and do not save or even
  * inspect the argument to VMXON (the so-called "VMXON pointer") because we
@@ -4278,6 +4373,9 @@ static int handle_vmon(struct kvm_vcpu *
 		return 1;
 	}
 
+	INIT_LIST_HEAD(&(vmx->nested.vmcs02_pool));
+	vmx->nested.vmcs02_num = 0;
+
 	vmx->nested.vmxon = true;
 
 	skip_emulated_instruction(vcpu);
@@ -4329,6 +4427,8 @@ static void free_nested(struct vcpu_vmx 
 		vmx->nested.current_vmptr = -1ull;
 		vmx->nested.current_vmcs12 = NULL;
 	}
+
+	nested_free_all_saved_vmcss(vmx);
 }
 
 /* Emulate the VMXOFF instruction */

[PATCH 09/31] nVMX: Add VMCS fields to the vmcs12

[Nadav Har'El]

In this patch we add to vmcs12 (the VMCS that L1 keeps for L2) all the
standard VMCS fields.

Later patches will enable L1 to read and write these fields using VMREAD/
VMWRITE, and they will be used during a VMLAUNCH/VMRESUME in preparing vmcs02,
a hardware VMCS for running L2.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |  281 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 281 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:53.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:53.000000000 +0300
@@ -158,12 +158,150 @@ struct shared_msr_entry {
  * machines (necessary for live migration).
  * If there are changes in this struct, VMCS12_REVISION must be changed.
  */
+typedef u64 natural_width;
 struct __packed vmcs12 {
 	/* According to the Intel spec, a VMCS region must start with the
 	 * following two fields. Then follow implementation-specific data.
 	 */
 	u32 revision_id;
 	u32 abort;
+
+	u64 io_bitmap_a;
+	u64 io_bitmap_b;
+	u64 msr_bitmap;
+	u64 vm_exit_msr_store_addr;
+	u64 vm_exit_msr_load_addr;
+	u64 vm_entry_msr_load_addr;
+	u64 tsc_offset;
+	u64 virtual_apic_page_addr;
+	u64 apic_access_addr;
+	u64 ept_pointer;
+	u64 guest_physical_address;
+	u64 vmcs_link_pointer;
+	u64 guest_ia32_debugctl;
+	u64 guest_ia32_pat;
+	u64 guest_ia32_efer;
+	u64 guest_ia32_perf_global_ctrl;
+	u64 guest_pdptr0;
+	u64 guest_pdptr1;
+	u64 guest_pdptr2;
+	u64 guest_pdptr3;
+	u64 host_ia32_pat;
+	u64 host_ia32_efer;
+	u64 host_ia32_perf_global_ctrl;
+	u64 padding64[8]; /* room for future expansion */
+	/*
+	 * To allow migration of L1 (complete with its L2 guests) between
+	 * machines of different natural widths (32 or 64 bit), we cannot have
+	 * unsigned long fields with no explict size. We use u64 (aliased
+	 * natural_width) instead. Luckily, x86 is little-endian.
+	 */
+	natural_width cr0_guest_host_mask;
+	natural_width cr4_guest_host_mask;
+	natural_width cr0_read_shadow;
+	natural_width cr4_read_shadow;
+	natural_width cr3_target_value0;
+	natural_width cr3_target_value1;
+	natural_width cr3_target_value2;
+	natural_width cr3_target_value3;
+	natural_width exit_qualification;
+	natural_width guest_linear_address;
+	natural_width guest_cr0;
+	natural_width guest_cr3;
+	natural_width guest_cr4;
+	natural_width guest_es_base;
+	natural_width guest_cs_base;
+	natural_width guest_ss_base;
+	natural_width guest_ds_base;
+	natural_width guest_fs_base;
+	natural_width guest_gs_base;
+	natural_width guest_ldtr_base;
+	natural_width guest_tr_base;
+	natural_width guest_gdtr_base;
+	natural_width guest_idtr_base;
+	natural_width guest_dr7;
+	natural_width guest_rsp;
+	natural_width guest_rip;
+	natural_width guest_rflags;
+	natural_width guest_pending_dbg_exceptions;
+	natural_width guest_sysenter_esp;
+	natural_width guest_sysenter_eip;
+	natural_width host_cr0;
+	natural_width host_cr3;
+	natural_width host_cr4;
+	natural_width host_fs_base;
+	natural_width host_gs_base;
+	natural_width host_tr_base;
+	natural_width host_gdtr_base;
+	natural_width host_idtr_base;
+	natural_width host_ia32_sysenter_esp;
+	natural_width host_ia32_sysenter_eip;
+	natural_width host_rsp;
+	natural_width host_rip;
+	natural_width paddingl[8]; /* room for future expansion */
+	u32 pin_based_vm_exec_control;
+	u32 cpu_based_vm_exec_control;
+	u32 exception_bitmap;
+	u32 page_fault_error_code_mask;
+	u32 page_fault_error_code_match;
+	u32 cr3_target_count;
+	u32 vm_exit_controls;
+	u32 vm_exit_msr_store_count;
+	u32 vm_exit_msr_load_count;
+	u32 vm_entry_controls;
+	u32 vm_entry_msr_load_count;
+	u32 vm_entry_intr_info_field;
+	u32 vm_entry_exception_error_code;
+	u32 vm_entry_instruction_len;
+	u32 tpr_threshold;
+	u32 secondary_vm_exec_control;
+	u32 vm_instruction_error;
+	u32 vm_exit_reason;
+	u32 vm_exit_intr_info;
+	u32 vm_exit_intr_error_code;
+	u32 idt_vectoring_info_field;
+	u32 idt_vectoring_error_code;
+	u32 vm_exit_instruction_len;
+	u32 vmx_instruction_info;
+	u32 guest_es_limit;
+	u32 guest_cs_limit;
+	u32 guest_ss_limit;
+	u32 guest_ds_limit;
+	u32 guest_fs_limit;
+	u32 guest_gs_limit;
+	u32 guest_ldtr_limit;
+	u32 guest_tr_limit;
+	u32 guest_gdtr_limit;
+	u32 guest_idtr_limit;
+	u32 guest_es_ar_bytes;
+	u32 guest_cs_ar_bytes;
+	u32 guest_ss_ar_bytes;
+	u32 guest_ds_ar_bytes;
+	u32 guest_fs_ar_bytes;
+	u32 guest_gs_ar_bytes;
+	u32 guest_ldtr_ar_bytes;
+	u32 guest_tr_ar_bytes;
+	u32 guest_interruptibility_info;
+	u32 guest_activity_state;
+	u32 guest_sysenter_cs;
+	u32 host_ia32_sysenter_cs;
+	u32 padding32[8]; /* room for future expansion */
+	u16 virtual_processor_id;
+	u16 guest_es_selector;
+	u16 guest_cs_selector;
+	u16 guest_ss_selector;
+	u16 guest_ds_selector;
+	u16 guest_fs_selector;
+	u16 guest_gs_selector;
+	u16 guest_ldtr_selector;
+	u16 guest_tr_selector;
+	u16 host_es_selector;
+	u16 host_cs_selector;
+	u16 host_ss_selector;
+	u16 host_ds_selector;
+	u16 host_fs_selector;
+	u16 host_gs_selector;
+	u16 host_tr_selector;
 };
 
 /*
@@ -284,6 +422,149 @@ static inline struct vcpu_vmx *to_vmx(st
 	return container_of(vcpu, struct vcpu_vmx, vcpu);
 }
 
+#define VMCS12_OFFSET(x) offsetof(struct vmcs12, x)
+#define FIELD(number, name)	[number] = VMCS12_OFFSET(name)
+#define FIELD64(number, name)	[number] = VMCS12_OFFSET(name), \
+				[number##_HIGH] = VMCS12_OFFSET(name)+4
+
+static unsigned short vmcs_field_to_offset_table[] = {
+	FIELD(VIRTUAL_PROCESSOR_ID, virtual_processor_id),
+	FIELD(GUEST_ES_SELECTOR, guest_es_selector),
+	FIELD(GUEST_CS_SELECTOR, guest_cs_selector),
+	FIELD(GUEST_SS_SELECTOR, guest_ss_selector),
+	FIELD(GUEST_DS_SELECTOR, guest_ds_selector),
+	FIELD(GUEST_FS_SELECTOR, guest_fs_selector),
+	FIELD(GUEST_GS_SELECTOR, guest_gs_selector),
+	FIELD(GUEST_LDTR_SELECTOR, guest_ldtr_selector),
+	FIELD(GUEST_TR_SELECTOR, guest_tr_selector),
+	FIELD(HOST_ES_SELECTOR, host_es_selector),
+	FIELD(HOST_CS_SELECTOR, host_cs_selector),
+	FIELD(HOST_SS_SELECTOR, host_ss_selector),
+	FIELD(HOST_DS_SELECTOR, host_ds_selector),
+	FIELD(HOST_FS_SELECTOR, host_fs_selector),
+	FIELD(HOST_GS_SELECTOR, host_gs_selector),
+	FIELD(HOST_TR_SELECTOR, host_tr_selector),
+	FIELD64(IO_BITMAP_A, io_bitmap_a),
+	FIELD64(IO_BITMAP_B, io_bitmap_b),
+	FIELD64(MSR_BITMAP, msr_bitmap),
+	FIELD64(VM_EXIT_MSR_STORE_ADDR, vm_exit_msr_store_addr),
+	FIELD64(VM_EXIT_MSR_LOAD_ADDR, vm_exit_msr_load_addr),
+	FIELD64(VM_ENTRY_MSR_LOAD_ADDR, vm_entry_msr_load_addr),
+	FIELD64(TSC_OFFSET, tsc_offset),
+	FIELD64(VIRTUAL_APIC_PAGE_ADDR, virtual_apic_page_addr),
+	FIELD64(APIC_ACCESS_ADDR, apic_access_addr),
+	FIELD64(EPT_POINTER, ept_pointer),
+	FIELD64(GUEST_PHYSICAL_ADDRESS, guest_physical_address),
+	FIELD64(VMCS_LINK_POINTER, vmcs_link_pointer),
+	FIELD64(GUEST_IA32_DEBUGCTL, guest_ia32_debugctl),
+	FIELD64(GUEST_IA32_PAT, guest_ia32_pat),
+	FIELD64(GUEST_IA32_EFER, guest_ia32_efer),
+	FIELD64(GUEST_IA32_PERF_GLOBAL_CTRL, guest_ia32_perf_global_ctrl),
+	FIELD64(GUEST_PDPTR0, guest_pdptr0),
+	FIELD64(GUEST_PDPTR1, guest_pdptr1),
+	FIELD64(GUEST_PDPTR2, guest_pdptr2),
+	FIELD64(GUEST_PDPTR3, guest_pdptr3),
+	FIELD64(HOST_IA32_PAT, host_ia32_pat),
+	FIELD64(HOST_IA32_EFER, host_ia32_efer),
+	FIELD64(HOST_IA32_PERF_GLOBAL_CTRL, host_ia32_perf_global_ctrl),
+	FIELD(PIN_BASED_VM_EXEC_CONTROL, pin_based_vm_exec_control),
+	FIELD(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control),
+	FIELD(EXCEPTION_BITMAP, exception_bitmap),
+	FIELD(PAGE_FAULT_ERROR_CODE_MASK, page_fault_error_code_mask),
+	FIELD(PAGE_FAULT_ERROR_CODE_MATCH, page_fault_error_code_match),
+	FIELD(CR3_TARGET_COUNT, cr3_target_count),
+	FIELD(VM_EXIT_CONTROLS, vm_exit_controls),
+	FIELD(VM_EXIT_MSR_STORE_COUNT, vm_exit_msr_store_count),
+	FIELD(VM_EXIT_MSR_LOAD_COUNT, vm_exit_msr_load_count),
+	FIELD(VM_ENTRY_CONTROLS, vm_entry_controls),
+	FIELD(VM_ENTRY_MSR_LOAD_COUNT, vm_entry_msr_load_count),
+	FIELD(VM_ENTRY_INTR_INFO_FIELD, vm_entry_intr_info_field),
+	FIELD(VM_ENTRY_EXCEPTION_ERROR_CODE, vm_entry_exception_error_code),
+	FIELD(VM_ENTRY_INSTRUCTION_LEN, vm_entry_instruction_len),
+	FIELD(TPR_THRESHOLD, tpr_threshold),
+	FIELD(SECONDARY_VM_EXEC_CONTROL, secondary_vm_exec_control),
+	FIELD(VM_INSTRUCTION_ERROR, vm_instruction_error),
+	FIELD(VM_EXIT_REASON, vm_exit_reason),
+	FIELD(VM_EXIT_INTR_INFO, vm_exit_intr_info),
+	FIELD(VM_EXIT_INTR_ERROR_CODE, vm_exit_intr_error_code),
+	FIELD(IDT_VECTORING_INFO_FIELD, idt_vectoring_info_field),
+	FIELD(IDT_VECTORING_ERROR_CODE, idt_vectoring_error_code),
+	FIELD(VM_EXIT_INSTRUCTION_LEN, vm_exit_instruction_len),
+	FIELD(VMX_INSTRUCTION_INFO, vmx_instruction_info),
+	FIELD(GUEST_ES_LIMIT, guest_es_limit),
+	FIELD(GUEST_CS_LIMIT, guest_cs_limit),
+	FIELD(GUEST_SS_LIMIT, guest_ss_limit),
+	FIELD(GUEST_DS_LIMIT, guest_ds_limit),
+	FIELD(GUEST_FS_LIMIT, guest_fs_limit),
+	FIELD(GUEST_GS_LIMIT, guest_gs_limit),
+	FIELD(GUEST_LDTR_LIMIT, guest_ldtr_limit),
+	FIELD(GUEST_TR_LIMIT, guest_tr_limit),
+	FIELD(GUEST_GDTR_LIMIT, guest_gdtr_limit),
+	FIELD(GUEST_IDTR_LIMIT, guest_idtr_limit),
+	FIELD(GUEST_ES_AR_BYTES, guest_es_ar_bytes),
+	FIELD(GUEST_CS_AR_BYTES, guest_cs_ar_bytes),
+	FIELD(GUEST_SS_AR_BYTES, guest_ss_ar_bytes),
+	FIELD(GUEST_DS_AR_BYTES, guest_ds_ar_bytes),
+	FIELD(GUEST_FS_AR_BYTES, guest_fs_ar_bytes),
+	FIELD(GUEST_GS_AR_BYTES, guest_gs_ar_bytes),
+	FIELD(GUEST_LDTR_AR_BYTES, guest_ldtr_ar_bytes),
+	FIELD(GUEST_TR_AR_BYTES, guest_tr_ar_bytes),
+	FIELD(GUEST_INTERRUPTIBILITY_INFO, guest_interruptibility_info),
+	FIELD(GUEST_ACTIVITY_STATE, guest_activity_state),
+	FIELD(GUEST_SYSENTER_CS, guest_sysenter_cs),
+	FIELD(HOST_IA32_SYSENTER_CS, host_ia32_sysenter_cs),
+	FIELD(CR0_GUEST_HOST_MASK, cr0_guest_host_mask),
+	FIELD(CR4_GUEST_HOST_MASK, cr4_guest_host_mask),
+	FIELD(CR0_READ_SHADOW, cr0_read_shadow),
+	FIELD(CR4_READ_SHADOW, cr4_read_shadow),
+	FIELD(CR3_TARGET_VALUE0, cr3_target_value0),
+	FIELD(CR3_TARGET_VALUE1, cr3_target_value1),
+	FIELD(CR3_TARGET_VALUE2, cr3_target_value2),
+	FIELD(CR3_TARGET_VALUE3, cr3_target_value3),
+	FIELD(EXIT_QUALIFICATION, exit_qualification),
+	FIELD(GUEST_LINEAR_ADDRESS, guest_linear_address),
+	FIELD(GUEST_CR0, guest_cr0),
+	FIELD(GUEST_CR3, guest_cr3),
+	FIELD(GUEST_CR4, guest_cr4),
+	FIELD(GUEST_ES_BASE, guest_es_base),
+	FIELD(GUEST_CS_BASE, guest_cs_base),
+	FIELD(GUEST_SS_BASE, guest_ss_base),
+	FIELD(GUEST_DS_BASE, guest_ds_base),
+	FIELD(GUEST_FS_BASE, guest_fs_base),
+	FIELD(GUEST_GS_BASE, guest_gs_base),
+	FIELD(GUEST_LDTR_BASE, guest_ldtr_base),
+	FIELD(GUEST_TR_BASE, guest_tr_base),
+	FIELD(GUEST_GDTR_BASE, guest_gdtr_base),
+	FIELD(GUEST_IDTR_BASE, guest_idtr_base),
+	FIELD(GUEST_DR7, guest_dr7),
+	FIELD(GUEST_RSP, guest_rsp),
+	FIELD(GUEST_RIP, guest_rip),
+	FIELD(GUEST_RFLAGS, guest_rflags),
+	FIELD(GUEST_PENDING_DBG_EXCEPTIONS, guest_pending_dbg_exceptions),
+	FIELD(GUEST_SYSENTER_ESP, guest_sysenter_esp),
+	FIELD(GUEST_SYSENTER_EIP, guest_sysenter_eip),
+	FIELD(HOST_CR0, host_cr0),
+	FIELD(HOST_CR3, host_cr3),
+	FIELD(HOST_CR4, host_cr4),
+	FIELD(HOST_FS_BASE, host_fs_base),
+	FIELD(HOST_GS_BASE, host_gs_base),
+	FIELD(HOST_TR_BASE, host_tr_base),
+	FIELD(HOST_GDTR_BASE, host_gdtr_base),
+	FIELD(HOST_IDTR_BASE, host_idtr_base),
+	FIELD(HOST_IA32_SYSENTER_ESP, host_ia32_sysenter_esp),
+	FIELD(HOST_IA32_SYSENTER_EIP, host_ia32_sysenter_eip),
+	FIELD(HOST_RSP, host_rsp),
+	FIELD(HOST_RIP, host_rip),
+};
+static const int max_vmcs_field = ARRAY_SIZE(vmcs_field_to_offset_table);
+
+static inline short vmcs_field_to_offset(unsigned long field)
+{
+	if (field >= max_vmcs_field || vmcs_field_to_offset_table[field] == 0)
+		return -1;
+	return vmcs_field_to_offset_table[field];
+}
+
 static inline struct vmcs12 *get_vmcs12(struct kvm_vcpu *vcpu)
 {
 	return to_vmx(vcpu)->nested.current_vmcs12;

[PATCH 10/31] nVMX: Success/failure of VMX instructions.

[Nadav Har'El]

VMX instructions specify success or failure by setting certain RFLAGS bits.
This patch contains common functions to do this, and they will be used in
the following patches which emulate the various VMX instructions.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/include/asm/vmx.h |   31 ++++++++++++++++++++++++++++
 arch/x86/kvm/vmx.c         |   38 +++++++++++++++++++++++++++++++++++
 2 files changed, 69 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:54.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:54.000000000 +0300
@@ -4776,6 +4776,44 @@ static int get_vmx_mem_address(struct kv
 }
 
 /*
+ * The following 3 functions, nested_vmx_succeed()/failValid()/failInvalid(),
+ * set the success or error code of an emulated VMX instruction, as specified
+ * by Vol 2B, VMX Instruction Reference, "Conventions".
+ */
+static void nested_vmx_succeed(struct kvm_vcpu *vcpu)
+{
+	vmx_set_rflags(vcpu, vmx_get_rflags(vcpu)
+			& ~(X86_EFLAGS_CF | X86_EFLAGS_PF | X86_EFLAGS_AF |
+			    X86_EFLAGS_ZF | X86_EFLAGS_SF | X86_EFLAGS_OF));
+}
+
+static void nested_vmx_failInvalid(struct kvm_vcpu *vcpu)
+{
+	vmx_set_rflags(vcpu, (vmx_get_rflags(vcpu)
+			& ~(X86_EFLAGS_PF | X86_EFLAGS_AF | X86_EFLAGS_ZF |
+			    X86_EFLAGS_SF | X86_EFLAGS_OF))
+			| X86_EFLAGS_CF);
+}
+
+static void nested_vmx_failValid(struct kvm_vcpu *vcpu,
+					u32 vm_instruction_error)
+{
+	if (to_vmx(vcpu)->nested.current_vmptr == -1ull) {
+		/*
+		 * failValid writes the error number to the current VMCS, which
+		 * can't be done there isn't a current VMCS.
+		 */
+		nested_vmx_failInvalid(vcpu);
+		return;
+	}
+	vmx_set_rflags(vcpu, (vmx_get_rflags(vcpu)
+			& ~(X86_EFLAGS_CF | X86_EFLAGS_PF | X86_EFLAGS_AF |
+			    X86_EFLAGS_SF | X86_EFLAGS_OF))
+			| X86_EFLAGS_ZF);
+	get_vmcs12(vcpu)->vm_instruction_error = vm_instruction_error;
+}
+
+/*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
  * to be done to userspace and return 0.
--- .before/arch/x86/include/asm/vmx.h	2011-05-25 22:40:54.000000000 +0300
+++ .after/arch/x86/include/asm/vmx.h	2011-05-25 22:40:54.000000000 +0300
@@ -426,4 +426,35 @@ struct vmx_msr_entry {
 	u64 value;
 } __aligned(16);
 
+/*
+ * VM-instruction error numbers
+ */
+enum vm_instruction_error_number {
+	VMXERR_VMCALL_IN_VMX_ROOT_OPERATION = 1,
+	VMXERR_VMCLEAR_INVALID_ADDRESS = 2,
+	VMXERR_VMCLEAR_VMXON_POINTER = 3,
+	VMXERR_VMLAUNCH_NONCLEAR_VMCS = 4,
+	VMXERR_VMRESUME_NONLAUNCHED_VMCS = 5,
+	VMXERR_VMRESUME_AFTER_VMXOFF = 6,
+	VMXERR_ENTRY_INVALID_CONTROL_FIELD = 7,
+	VMXERR_ENTRY_INVALID_HOST_STATE_FIELD = 8,
+	VMXERR_VMPTRLD_INVALID_ADDRESS = 9,
+	VMXERR_VMPTRLD_VMXON_POINTER = 10,
+	VMXERR_VMPTRLD_INCORRECT_VMCS_REVISION_ID = 11,
+	VMXERR_UNSUPPORTED_VMCS_COMPONENT = 12,
+	VMXERR_VMWRITE_READ_ONLY_VMCS_COMPONENT = 13,
+	VMXERR_VMXON_IN_VMX_ROOT_OPERATION = 15,
+	VMXERR_ENTRY_INVALID_EXECUTIVE_VMCS_POINTER = 16,
+	VMXERR_ENTRY_NONLAUNCHED_EXECUTIVE_VMCS = 17,
+	VMXERR_ENTRY_EXECUTIVE_VMCS_POINTER_NOT_VMXON_POINTER = 18,
+	VMXERR_VMCALL_NONCLEAR_VMCS = 19,
+	VMXERR_VMCALL_INVALID_VM_EXIT_CONTROL_FIELDS = 20,
+	VMXERR_VMCALL_INCORRECT_MSEG_REVISION_ID = 22,
+	VMXERR_VMXOFF_UNDER_DUAL_MONITOR_TREATMENT_OF_SMIS_AND_SMM = 23,
+	VMXERR_VMCALL_INVALID_SMM_MONITOR_FEATURES = 24,
+	VMXERR_ENTRY_INVALID_VM_EXECUTION_CONTROL_FIELDS_IN_EXECUTIVE_VMCS = 25,
+	VMXERR_ENTRY_EVENTS_BLOCKED_BY_MOV_SS = 26,
+	VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID = 28,
+};
+
 #endif

[PATCH 11/31] nVMX: Implement VMCLEAR

[Nadav Har'El]

This patch implements the VMCLEAR instruction.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   65 ++++++++++++++++++++++++++++++++++++++++++-
 arch/x86/kvm/x86.c |    1 
 2 files changed, 65 insertions(+), 1 deletion(-)

--- .before/arch/x86/kvm/x86.c	2011-05-25 22:40:55.000000000 +0300
+++ .after/arch/x86/kvm/x86.c	2011-05-25 22:40:55.000000000 +0300
@@ -347,6 +347,7 @@ void kvm_inject_page_fault(struct kvm_vc
 	vcpu->arch.cr2 = fault->address;
 	kvm_queue_exception_e(vcpu, PF_VECTOR, fault->error_code);
 }
+EXPORT_SYMBOL_GPL(kvm_inject_page_fault);
 
 void kvm_propagate_fault(struct kvm_vcpu *vcpu, struct x86_exception *fault)
 {
--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:55.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:55.000000000 +0300
@@ -166,6 +166,9 @@ struct __packed vmcs12 {
 	u32 revision_id;
 	u32 abort;
 
+	u32 launch_state; /* set to 0 by VMCLEAR, to 1 by VMLAUNCH */
+	u32 padding[7]; /* room for future expansion */
+
 	u64 io_bitmap_a;
 	u64 io_bitmap_b;
 	u64 msr_bitmap;
@@ -4813,6 +4816,66 @@ static void nested_vmx_failValid(struct 
 	get_vmcs12(vcpu)->vm_instruction_error = vm_instruction_error;
 }
 
+/* Emulate the VMCLEAR instruction */
+static int handle_vmclear(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	gva_t gva;
+	gpa_t vmptr;
+	struct vmcs12 *vmcs12;
+	struct page *page;
+	struct x86_exception e;
+
+	if (!nested_vmx_check_permission(vcpu))
+		return 1;
+
+	if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION),
+			vmcs_read32(VMX_INSTRUCTION_INFO), &gva))
+		return 1;
+
+	if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva, &vmptr,
+				sizeof(vmptr), &e)) {
+		kvm_inject_page_fault(vcpu, &e);
+		return 1;
+	}
+
+	if (!IS_ALIGNED(vmptr, PAGE_SIZE)) {
+		nested_vmx_failValid(vcpu, VMXERR_VMCLEAR_INVALID_ADDRESS);
+		skip_emulated_instruction(vcpu);
+		return 1;
+	}
+
+	if (vmptr == vmx->nested.current_vmptr) {
+		kunmap(vmx->nested.current_vmcs12_page);
+		nested_release_page(vmx->nested.current_vmcs12_page);
+		vmx->nested.current_vmptr = -1ull;
+		vmx->nested.current_vmcs12 = NULL;
+	}
+
+	page = nested_get_page(vcpu, vmptr);
+	if (page == NULL) {
+		/*
+		 * For accurate processor emulation, VMCLEAR beyond available
+		 * physical memory should do nothing at all. However, it is
+		 * possible that a nested vmx bug, not a guest hypervisor bug,
+		 * resulted in this case, so let's shut down before doing any
+		 * more damage:
+		 */
+		kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
+		return 1;
+	}
+	vmcs12 = kmap(page);
+	vmcs12->launch_state = 0;
+	kunmap(page);
+	nested_release_page(page);
+
+	nested_free_vmcs02(vmx, vmptr);
+
+	skip_emulated_instruction(vcpu);
+	nested_vmx_succeed(vcpu);
+	return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -4834,7 +4897,7 @@ static int (*kvm_vmx_exit_handlers[])(st
 	[EXIT_REASON_INVD]		      = handle_invd,
 	[EXIT_REASON_INVLPG]		      = handle_invlpg,
 	[EXIT_REASON_VMCALL]                  = handle_vmcall,
-	[EXIT_REASON_VMCLEAR]	              = handle_vmx_insn,
+	[EXIT_REASON_VMCLEAR]	              = handle_vmclear,
 	[EXIT_REASON_VMLAUNCH]                = handle_vmx_insn,
 	[EXIT_REASON_VMPTRLD]                 = handle_vmx_insn,
 	[EXIT_REASON_VMPTRST]                 = handle_vmx_insn,

[PATCH 12/31] nVMX: Implement VMPTRLD

[Nadav Har'El]

This patch implements the VMPTRLD instruction.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   62 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 61 insertions(+), 1 deletion(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:57.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:57.000000000 +0300
@@ -4876,6 +4876,66 @@ static int handle_vmclear(struct kvm_vcp
 	return 1;
 }
 
+/* Emulate the VMPTRLD instruction */
+static int handle_vmptrld(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	gva_t gva;
+	gpa_t vmptr;
+	struct x86_exception e;
+
+	if (!nested_vmx_check_permission(vcpu))
+		return 1;
+
+	if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION),
+			vmcs_read32(VMX_INSTRUCTION_INFO), &gva))
+		return 1;
+
+	if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva, &vmptr,
+				sizeof(vmptr), &e)) {
+		kvm_inject_page_fault(vcpu, &e);
+		return 1;
+	}
+
+	if (!IS_ALIGNED(vmptr, PAGE_SIZE)) {
+		nested_vmx_failValid(vcpu, VMXERR_VMPTRLD_INVALID_ADDRESS);
+		skip_emulated_instruction(vcpu);
+		return 1;
+	}
+
+	if (vmx->nested.current_vmptr != vmptr) {
+		struct vmcs12 *new_vmcs12;
+		struct page *page;
+		page = nested_get_page(vcpu, vmptr);
+		if (page == NULL) {
+			nested_vmx_failInvalid(vcpu);
+			skip_emulated_instruction(vcpu);
+			return 1;
+		}
+		new_vmcs12 = kmap(page);
+		if (new_vmcs12->revision_id != VMCS12_REVISION) {
+			kunmap(page);
+			nested_release_page_clean(page);
+			nested_vmx_failValid(vcpu,
+				VMXERR_VMPTRLD_INCORRECT_VMCS_REVISION_ID);
+			skip_emulated_instruction(vcpu);
+			return 1;
+		}
+		if (vmx->nested.current_vmptr != -1ull) {
+			kunmap(vmx->nested.current_vmcs12_page);
+			nested_release_page(vmx->nested.current_vmcs12_page);
+		}
+
+		vmx->nested.current_vmptr = vmptr;
+		vmx->nested.current_vmcs12 = new_vmcs12;
+		vmx->nested.current_vmcs12_page = page;
+	}
+
+	nested_vmx_succeed(vcpu);
+	skip_emulated_instruction(vcpu);
+	return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -4899,7 +4959,7 @@ static int (*kvm_vmx_exit_handlers[])(st
 	[EXIT_REASON_VMCALL]                  = handle_vmcall,
 	[EXIT_REASON_VMCLEAR]	              = handle_vmclear,
 	[EXIT_REASON_VMLAUNCH]                = handle_vmx_insn,
-	[EXIT_REASON_VMPTRLD]                 = handle_vmx_insn,
+	[EXIT_REASON_VMPTRLD]                 = handle_vmptrld,
 	[EXIT_REASON_VMPTRST]                 = handle_vmx_insn,
 	[EXIT_REASON_VMREAD]                  = handle_vmx_insn,
 	[EXIT_REASON_VMRESUME]                = handle_vmx_insn,

[PATCH 13/31] nVMX: Implement VMPTRST

[Nadav Har'El]

This patch implements the VMPTRST instruction. 

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   28 +++++++++++++++++++++++++++-
 arch/x86/kvm/x86.c |    3 ++-
 arch/x86/kvm/x86.h |    4 ++++
 3 files changed, 33 insertions(+), 2 deletions(-)

--- .before/arch/x86/kvm/x86.c	2011-05-25 22:40:58.000000000 +0300
+++ .after/arch/x86/kvm/x86.c	2011-05-25 22:40:58.000000000 +0300
@@ -3869,7 +3869,7 @@ static int kvm_read_guest_virt_system(st
 	return kvm_read_guest_virt_helper(addr, val, bytes, vcpu, 0, exception);
 }
 
-static int kvm_write_guest_virt_system(struct x86_emulate_ctxt *ctxt,
+int kvm_write_guest_virt_system(struct x86_emulate_ctxt *ctxt,
 				       gva_t addr, void *val,
 				       unsigned int bytes,
 				       struct x86_exception *exception)
@@ -3901,6 +3901,7 @@ static int kvm_write_guest_virt_system(s
 out:
 	return r;
 }
+EXPORT_SYMBOL_GPL(kvm_write_guest_virt_system);
 
 static int emulator_read_emulated(struct x86_emulate_ctxt *ctxt,
 				  unsigned long addr,
--- .before/arch/x86/kvm/x86.h	2011-05-25 22:40:58.000000000 +0300
+++ .after/arch/x86/kvm/x86.h	2011-05-25 22:40:58.000000000 +0300
@@ -85,4 +85,8 @@ int kvm_read_guest_virt(struct x86_emula
 	gva_t addr, void *val, unsigned int bytes,
 	struct x86_exception *exception);
 
+int kvm_write_guest_virt_system(struct x86_emulate_ctxt *ctxt,
+	gva_t addr, void *val, unsigned int bytes,
+	struct x86_exception *exception);
+
 #endif
--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:58.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:59.000000000 +0300
@@ -4936,6 +4936,32 @@ static int handle_vmptrld(struct kvm_vcp
 	return 1;
 }
 
+/* Emulate the VMPTRST instruction */
+static int handle_vmptrst(struct kvm_vcpu *vcpu)
+{
+	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	u32 vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
+	gva_t vmcs_gva;
+	struct x86_exception e;
+
+	if (!nested_vmx_check_permission(vcpu))
+		return 1;
+
+	if (get_vmx_mem_address(vcpu, exit_qualification,
+			vmx_instruction_info, &vmcs_gva))
+		return 1;
+	/* ok to use *_system, as nested_vmx_check_permission verified cpl=0 */
+	if (kvm_write_guest_virt_system(&vcpu->arch.emulate_ctxt, vmcs_gva,
+				 (void *)&to_vmx(vcpu)->nested.current_vmptr,
+				 sizeof(u64), &e)) {
+		kvm_inject_page_fault(vcpu, &e);
+		return 1;
+	}
+	nested_vmx_succeed(vcpu);
+	skip_emulated_instruction(vcpu);
+	return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -4960,7 +4986,7 @@ static int (*kvm_vmx_exit_handlers[])(st
 	[EXIT_REASON_VMCLEAR]	              = handle_vmclear,
 	[EXIT_REASON_VMLAUNCH]                = handle_vmx_insn,
 	[EXIT_REASON_VMPTRLD]                 = handle_vmptrld,
-	[EXIT_REASON_VMPTRST]                 = handle_vmx_insn,
+	[EXIT_REASON_VMPTRST]                 = handle_vmptrst,
 	[EXIT_REASON_VMREAD]                  = handle_vmx_insn,
 	[EXIT_REASON_VMRESUME]                = handle_vmx_insn,
 	[EXIT_REASON_VMWRITE]                 = handle_vmx_insn,

[PATCH 14/31] nVMX: Implement VMREAD and VMWRITE

[Nadav Har'El]

Implement the VMREAD and VMWRITE instructions. With these instructions, L1
can read and write to the VMCS it is holding. The values are read or written
to the fields of the vmcs12 structure introduced in a previous patch.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |  193 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 191 insertions(+), 2 deletions(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:40:59.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:40:59.000000000 +0300
@@ -4876,6 +4876,195 @@ static int handle_vmclear(struct kvm_vcp
 	return 1;
 }
 
+enum vmcs_field_type {
+	VMCS_FIELD_TYPE_U16 = 0,
+	VMCS_FIELD_TYPE_U64 = 1,
+	VMCS_FIELD_TYPE_U32 = 2,
+	VMCS_FIELD_TYPE_NATURAL_WIDTH = 3
+};
+
+static inline int vmcs_field_type(unsigned long field)
+{
+	if (0x1 & field)	/* the *_HIGH fields are all 32 bit */
+		return VMCS_FIELD_TYPE_U32;
+	return (field >> 13) & 0x3 ;
+}
+
+static inline int vmcs_field_readonly(unsigned long field)
+{
+	return (((field >> 10) & 0x3) == 1);
+}
+
+/*
+ * Read a vmcs12 field. Since these can have varying lengths and we return
+ * one type, we chose the biggest type (u64) and zero-extend the return value
+ * to that size. Note that the caller, handle_vmread, might need to use only
+ * some of the bits we return here (e.g., on 32-bit guests, only 32 bits of
+ * 64-bit fields are to be returned).
+ */
+static inline bool vmcs12_read_any(struct kvm_vcpu *vcpu,
+					unsigned long field, u64 *ret)
+{
+	short offset = vmcs_field_to_offset(field);
+	char *p;
+
+	if (offset < 0)
+		return 0;
+
+	p = ((char *)(get_vmcs12(vcpu))) + offset;
+
+	switch (vmcs_field_type(field)) {
+	case VMCS_FIELD_TYPE_NATURAL_WIDTH:
+		*ret = *((natural_width *)p);
+		return 1;
+	case VMCS_FIELD_TYPE_U16:
+		*ret = *((u16 *)p);
+		return 1;
+	case VMCS_FIELD_TYPE_U32:
+		*ret = *((u32 *)p);
+		return 1;
+	case VMCS_FIELD_TYPE_U64:
+		*ret = *((u64 *)p);
+		return 1;
+	default:
+		return 0; /* can never happen. */
+	}
+}
+
+/*
+ * VMX instructions which assume a current vmcs12 (i.e., that VMPTRLD was
+ * used before) all generate the same failure when it is missing.
+ */
+static int nested_vmx_check_vmcs12(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	if (vmx->nested.current_vmptr == -1ull) {
+		nested_vmx_failInvalid(vcpu);
+		skip_emulated_instruction(vcpu);
+		return 0;
+	}
+	return 1;
+}
+
+static int handle_vmread(struct kvm_vcpu *vcpu)
+{
+	unsigned long field;
+	u64 field_value;
+	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	u32 vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
+	gva_t gva = 0;
+
+	if (!nested_vmx_check_permission(vcpu) ||
+	    !nested_vmx_check_vmcs12(vcpu))
+		return 1;
+
+	/* Decode instruction info and find the field to read */
+	field = kvm_register_read(vcpu, (((vmx_instruction_info) >> 28) & 0xf));
+	/* Read the field, zero-extended to a u64 field_value */
+	if (!vmcs12_read_any(vcpu, field, &field_value)) {
+		nested_vmx_failValid(vcpu, VMXERR_UNSUPPORTED_VMCS_COMPONENT);
+		skip_emulated_instruction(vcpu);
+		return 1;
+	}
+	/*
+	 * Now copy part of this value to register or memory, as requested.
+	 * Note that the number of bits actually copied is 32 or 64 depending
+	 * on the guest's mode (32 or 64 bit), not on the given field's length.
+	 */
+	if (vmx_instruction_info & (1u << 10)) {
+		kvm_register_write(vcpu, (((vmx_instruction_info) >> 3) & 0xf),
+			field_value);
+	} else {
+		if (get_vmx_mem_address(vcpu, exit_qualification,
+				vmx_instruction_info, &gva))
+			return 1;
+		/* _system ok, as nested_vmx_check_permission verified cpl=0 */
+		kvm_write_guest_virt_system(&vcpu->arch.emulate_ctxt, gva,
+			     &field_value, (is_long_mode(vcpu) ? 8 : 4), NULL);
+	}
+
+	nested_vmx_succeed(vcpu);
+	skip_emulated_instruction(vcpu);
+	return 1;
+}
+
+
+static int handle_vmwrite(struct kvm_vcpu *vcpu)
+{
+	unsigned long field;
+	gva_t gva;
+	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	u32 vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
+	char *p;
+	short offset;
+	/* The value to write might be 32 or 64 bits, depending on L1's long
+	 * mode, and eventually we need to write that into a field of several
+	 * possible lengths. The code below first zero-extends the value to 64
+	 * bit (field_value), and then copies only the approriate number of
+	 * bits into the vmcs12 field.
+	 */
+	u64 field_value = 0;
+	struct x86_exception e;
+
+	if (!nested_vmx_check_permission(vcpu) ||
+	    !nested_vmx_check_vmcs12(vcpu))
+		return 1;
+
+	if (vmx_instruction_info & (1u << 10))
+		field_value = kvm_register_read(vcpu,
+			(((vmx_instruction_info) >> 3) & 0xf));
+	else {
+		if (get_vmx_mem_address(vcpu, exit_qualification,
+				vmx_instruction_info, &gva))
+			return 1;
+		if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva,
+			   &field_value, (is_long_mode(vcpu) ? 8 : 4), &e)) {
+			kvm_inject_page_fault(vcpu, &e);
+			return 1;
+		}
+	}
+
+
+	field = kvm_register_read(vcpu, (((vmx_instruction_info) >> 28) & 0xf));
+	if (vmcs_field_readonly(field)) {
+		nested_vmx_failValid(vcpu,
+			VMXERR_VMWRITE_READ_ONLY_VMCS_COMPONENT);
+		skip_emulated_instruction(vcpu);
+		return 1;
+	}
+
+	offset = vmcs_field_to_offset(field);
+	if (offset < 0) {
+		nested_vmx_failValid(vcpu, VMXERR_UNSUPPORTED_VMCS_COMPONENT);
+		skip_emulated_instruction(vcpu);
+		return 1;
+	}
+	p = ((char *) get_vmcs12(vcpu)) + offset;
+
+	switch (vmcs_field_type(field)) {
+	case VMCS_FIELD_TYPE_U16:
+		*(u16 *)p = field_value;
+		break;
+	case VMCS_FIELD_TYPE_U32:
+		*(u32 *)p = field_value;
+		break;
+	case VMCS_FIELD_TYPE_U64:
+		*(u64 *)p = field_value;
+		break;
+	case VMCS_FIELD_TYPE_NATURAL_WIDTH:
+		*(natural_width *)p = field_value;
+		break;
+	default:
+		nested_vmx_failValid(vcpu, VMXERR_UNSUPPORTED_VMCS_COMPONENT);
+		skip_emulated_instruction(vcpu);
+		return 1;
+	}
+
+	nested_vmx_succeed(vcpu);
+	skip_emulated_instruction(vcpu);
+	return 1;
+}
+
 /* Emulate the VMPTRLD instruction */
 static int handle_vmptrld(struct kvm_vcpu *vcpu)
 {
@@ -4987,9 +5176,9 @@ static int (*kvm_vmx_exit_handlers[])(st
 	[EXIT_REASON_VMLAUNCH]                = handle_vmx_insn,
 	[EXIT_REASON_VMPTRLD]                 = handle_vmptrld,
 	[EXIT_REASON_VMPTRST]                 = handle_vmptrst,
-	[EXIT_REASON_VMREAD]                  = handle_vmx_insn,
+	[EXIT_REASON_VMREAD]                  = handle_vmread,
 	[EXIT_REASON_VMRESUME]                = handle_vmx_insn,
-	[EXIT_REASON_VMWRITE]                 = handle_vmx_insn,
+	[EXIT_REASON_VMWRITE]                 = handle_vmwrite,
 	[EXIT_REASON_VMOFF]                   = handle_vmoff,
 	[EXIT_REASON_VMON]                    = handle_vmon,
 	[EXIT_REASON_TPR_BELOW_THRESHOLD]     = handle_tpr_below_threshold,

[PATCH 15/31] nVMX: Move host-state field setup to a function

[Nadav Har'El]

Move the setting of constant host-state fields (fields that do not change
throughout the life of the guest) from vmx_vcpu_setup to a new common function
vmx_set_constant_host_state(). This function will also be used to set the
host state when running L2 guests.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   74 ++++++++++++++++++++++++-------------------
 1 file changed, 42 insertions(+), 32 deletions(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:01.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:01.000000000 +0300
@@ -3394,17 +3394,51 @@ static void vmx_disable_intercept_for_ms
 }
 
 /*
+ * Set up the vmcs's constant host-state fields, i.e., host-state fields that
+ * will not change in the lifetime of the guest.
+ * Note that host-state that does change is set elsewhere. E.g., host-state
+ * that is set differently for each CPU is set in vmx_vcpu_load(), not here.
+ */
+static void vmx_set_constant_host_state(void)
+{
+	u32 low32, high32;
+	unsigned long tmpl;
+	struct desc_ptr dt;
+
+	vmcs_writel(HOST_CR0, read_cr0() | X86_CR0_TS);  /* 22.2.3 */
+	vmcs_writel(HOST_CR4, read_cr4());  /* 22.2.3, 22.2.5 */
+	vmcs_writel(HOST_CR3, read_cr3());  /* 22.2.3  FIXME: shadow tables */
+
+	vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS);  /* 22.2.4 */
+	vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
+	vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
+	vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
+	vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8);  /* 22.2.4 */
+
+	native_store_idt(&dt);
+	vmcs_writel(HOST_IDTR_BASE, dt.address);   /* 22.2.4 */
+
+	asm("mov $.Lkvm_vmx_return, %0" : "=r"(tmpl));
+	vmcs_writel(HOST_RIP, tmpl); /* 22.2.5 */
+
+	rdmsr(MSR_IA32_SYSENTER_CS, low32, high32);
+	vmcs_write32(HOST_IA32_SYSENTER_CS, low32);
+	rdmsrl(MSR_IA32_SYSENTER_EIP, tmpl);
+	vmcs_writel(HOST_IA32_SYSENTER_EIP, tmpl);   /* 22.2.3 */
+
+	if (vmcs_config.vmexit_ctrl & VM_EXIT_LOAD_IA32_PAT) {
+		rdmsr(MSR_IA32_CR_PAT, low32, high32);
+		vmcs_write64(HOST_IA32_PAT, low32 | ((u64) high32 << 32));
+	}
+}
+
+/*
  * Sets up the vmcs for emulated real mode.
  */
 static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 {
-	u32 host_sysenter_cs, msr_low, msr_high;
-	u32 junk;
-	u64 host_pat;
 	unsigned long a;
-	struct desc_ptr dt;
 	int i;
-	unsigned long kvm_vmx_return;
 	u32 exec_control;
 
 	/* I/O */
@@ -3461,16 +3495,9 @@ static int vmx_vcpu_setup(struct vcpu_vm
 	vmcs_write32(PAGE_FAULT_ERROR_CODE_MATCH, !!bypass_guest_pf);
 	vmcs_write32(CR3_TARGET_COUNT, 0);           /* 22.2.1 */
 
-	vmcs_writel(HOST_CR0, read_cr0() | X86_CR0_TS);  /* 22.2.3 */
-	vmcs_writel(HOST_CR4, read_cr4());  /* 22.2.3, 22.2.5 */
-	vmcs_writel(HOST_CR3, read_cr3());  /* 22.2.3  FIXME: shadow tables */
-
-	vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS);  /* 22.2.4 */
-	vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
-	vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
 	vmcs_write16(HOST_FS_SELECTOR, 0);            /* 22.2.4 */
 	vmcs_write16(HOST_GS_SELECTOR, 0);            /* 22.2.4 */
-	vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
+	vmx_set_constant_host_state();
 #ifdef CONFIG_X86_64
 	rdmsrl(MSR_FS_BASE, a);
 	vmcs_writel(HOST_FS_BASE, a); /* 22.2.4 */
@@ -3481,32 +3508,15 @@ static int vmx_vcpu_setup(struct vcpu_vm
 	vmcs_writel(HOST_GS_BASE, 0); /* 22.2.4 */
 #endif
 
-	vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8);  /* 22.2.4 */
-
-	native_store_idt(&dt);
-	vmcs_writel(HOST_IDTR_BASE, dt.address);   /* 22.2.4 */
-
-	asm("mov $.Lkvm_vmx_return, %0" : "=r"(kvm_vmx_return));
-	vmcs_writel(HOST_RIP, kvm_vmx_return); /* 22.2.5 */
 	vmcs_write32(VM_EXIT_MSR_STORE_COUNT, 0);
 	vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, 0);
 	vmcs_write64(VM_EXIT_MSR_LOAD_ADDR, __pa(vmx->msr_autoload.host));
 	vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, 0);
 	vmcs_write64(VM_ENTRY_MSR_LOAD_ADDR, __pa(vmx->msr_autoload.guest));
 
-	rdmsr(MSR_IA32_SYSENTER_CS, host_sysenter_cs, junk);
-	vmcs_write32(HOST_IA32_SYSENTER_CS, host_sysenter_cs);
-	rdmsrl(MSR_IA32_SYSENTER_ESP, a);
-	vmcs_writel(HOST_IA32_SYSENTER_ESP, a);   /* 22.2.3 */
-	rdmsrl(MSR_IA32_SYSENTER_EIP, a);
-	vmcs_writel(HOST_IA32_SYSENTER_EIP, a);   /* 22.2.3 */
-
-	if (vmcs_config.vmexit_ctrl & VM_EXIT_LOAD_IA32_PAT) {
-		rdmsr(MSR_IA32_CR_PAT, msr_low, msr_high);
-		host_pat = msr_low | ((u64) msr_high << 32);
-		vmcs_write64(HOST_IA32_PAT, host_pat);
-	}
 	if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
+		u32 msr_low, msr_high;
+		u64 host_pat;
 		rdmsr(MSR_IA32_CR_PAT, msr_low, msr_high);
 		host_pat = msr_low | ((u64) msr_high << 32);
 		/* Write the default value follow host pat */

[PATCH 16/31] nVMX: Move control field setup to functions

[Nadav Har'El]

Move some of the control field setup to common functions. These functions will
also be needed for running L2 guests - L0's desires (expressed in these
functions) will be appropriately merged with L1's desires.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   80 +++++++++++++++++++++++++------------------
 1 file changed, 47 insertions(+), 33 deletions(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:02.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:02.000000000 +0300
@@ -3432,6 +3432,49 @@ static void vmx_set_constant_host_state(
 	}
 }
 
+static void set_cr4_guest_host_mask(struct vcpu_vmx *vmx)
+{
+	vmx->vcpu.arch.cr4_guest_owned_bits = KVM_CR4_GUEST_OWNED_BITS;
+	if (enable_ept)
+		vmx->vcpu.arch.cr4_guest_owned_bits |= X86_CR4_PGE;
+	vmcs_writel(CR4_GUEST_HOST_MASK, ~vmx->vcpu.arch.cr4_guest_owned_bits);
+}
+
+static u32 vmx_exec_control(struct vcpu_vmx *vmx)
+{
+	u32 exec_control = vmcs_config.cpu_based_exec_ctrl;
+	if (!vm_need_tpr_shadow(vmx->vcpu.kvm)) {
+		exec_control &= ~CPU_BASED_TPR_SHADOW;
+#ifdef CONFIG_X86_64
+		exec_control |= CPU_BASED_CR8_STORE_EXITING |
+				CPU_BASED_CR8_LOAD_EXITING;
+#endif
+	}
+	if (!enable_ept)
+		exec_control |= CPU_BASED_CR3_STORE_EXITING |
+				CPU_BASED_CR3_LOAD_EXITING  |
+				CPU_BASED_INVLPG_EXITING;
+	return exec_control;
+}
+
+static u32 vmx_secondary_exec_control(struct vcpu_vmx *vmx)
+{
+	u32 exec_control = vmcs_config.cpu_based_2nd_exec_ctrl;
+	if (!vm_need_virtualize_apic_accesses(vmx->vcpu.kvm))
+		exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
+	if (vmx->vpid == 0)
+		exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
+	if (!enable_ept) {
+		exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
+		enable_unrestricted_guest = 0;
+	}
+	if (!enable_unrestricted_guest)
+		exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST;
+	if (!ple_gap)
+		exec_control &= ~SECONDARY_EXEC_PAUSE_LOOP_EXITING;
+	return exec_control;
+}
+
 /*
  * Sets up the vmcs for emulated real mode.
  */
@@ -3439,7 +3482,6 @@ static int vmx_vcpu_setup(struct vcpu_vm
 {
 	unsigned long a;
 	int i;
-	u32 exec_control;
 
 	/* I/O */
 	vmcs_write64(IO_BITMAP_A, __pa(vmx_io_bitmap_a));
@@ -3454,36 +3496,11 @@ static int vmx_vcpu_setup(struct vcpu_vm
 	vmcs_write32(PIN_BASED_VM_EXEC_CONTROL,
 		vmcs_config.pin_based_exec_ctrl);
 
-	exec_control = vmcs_config.cpu_based_exec_ctrl;
-	if (!vm_need_tpr_shadow(vmx->vcpu.kvm)) {
-		exec_control &= ~CPU_BASED_TPR_SHADOW;
-#ifdef CONFIG_X86_64
-		exec_control |= CPU_BASED_CR8_STORE_EXITING |
-				CPU_BASED_CR8_LOAD_EXITING;
-#endif
-	}
-	if (!enable_ept)
-		exec_control |= CPU_BASED_CR3_STORE_EXITING |
-				CPU_BASED_CR3_LOAD_EXITING  |
-				CPU_BASED_INVLPG_EXITING;
-	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, exec_control);
+	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, vmx_exec_control(vmx));
 
 	if (cpu_has_secondary_exec_ctrls()) {
-		exec_control = vmcs_config.cpu_based_2nd_exec_ctrl;
-		if (!vm_need_virtualize_apic_accesses(vmx->vcpu.kvm))
-			exec_control &=
-				~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
-		if (vmx->vpid == 0)
-			exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
-		if (!enable_ept) {
-			exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
-			enable_unrestricted_guest = 0;
-		}
-		if (!enable_unrestricted_guest)
-			exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST;
-		if (!ple_gap)
-			exec_control &= ~SECONDARY_EXEC_PAUSE_LOOP_EXITING;
-		vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
+		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
+				vmx_secondary_exec_control(vmx));
 	}
 
 	if (ple_gap) {
@@ -3546,10 +3563,7 @@ static int vmx_vcpu_setup(struct vcpu_vm
 	vmcs_write32(VM_ENTRY_CONTROLS, vmcs_config.vmentry_ctrl);
 
 	vmcs_writel(CR0_GUEST_HOST_MASK, ~0UL);
-	vmx->vcpu.arch.cr4_guest_owned_bits = KVM_CR4_GUEST_OWNED_BITS;
-	if (enable_ept)
-		vmx->vcpu.arch.cr4_guest_owned_bits |= X86_CR4_PGE;
-	vmcs_writel(CR4_GUEST_HOST_MASK, ~vmx->vcpu.arch.cr4_guest_owned_bits);
+	set_cr4_guest_host_mask(vmx);
 
 	kvm_write_tsc(&vmx->vcpu, 0);
 

[PATCH 17/31] nVMX: Prepare vmcs02 from vmcs01 and vmcs12

[Nadav Har'El]

This patch contains code to prepare the VMCS which can be used to actually
run the L2 guest, vmcs02. prepare_vmcs02 appropriately merges the information
in vmcs12 (the vmcs that L1 built for L2) and in vmcs01 (our desires for our
own guests).

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |  279 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 279 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:03.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:03.000000000 +0300
@@ -345,6 +345,12 @@ struct nested_vmx {
 	/* vmcs02_list cache of VMCSs recently used to run L2 guests */
 	struct list_head vmcs02_pool;
 	int vmcs02_num;
+	u64 vmcs01_tsc_offset;
+	/*
+	 * Guest pages referred to in vmcs02 with host-physical pointers, so
+	 * we must keep them pinned while L2 runs.
+	 */
+	struct page *apic_access_page;
 };
 
 struct vcpu_vmx {
@@ -847,6 +853,18 @@ static inline bool report_flexpriority(v
 	return flexpriority_enabled;
 }
 
+static inline bool nested_cpu_has(struct vmcs12 *vmcs12, u32 bit)
+{
+	return vmcs12->cpu_based_vm_exec_control & bit;
+}
+
+static inline bool nested_cpu_has2(struct vmcs12 *vmcs12, u32 bit)
+{
+	return (vmcs12->cpu_based_vm_exec_control &
+			CPU_BASED_ACTIVATE_SECONDARY_CONTROLS) &&
+		(vmcs12->secondary_vm_exec_control & bit);
+}
+
 static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 {
 	int i;
@@ -1441,6 +1459,22 @@ static void vmx_fpu_activate(struct kvm_
 
 static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
 
+/*
+ * Return the cr0 value that a nested guest would read. This is a combination
+ * of the real cr0 used to run the guest (guest_cr0), and the bits shadowed by
+ * its hypervisor (cr0_read_shadow).
+ */
+static inline unsigned long nested_read_cr0(struct vmcs12 *fields)
+{
+	return (fields->guest_cr0 & ~fields->cr0_guest_host_mask) |
+		(fields->cr0_read_shadow & fields->cr0_guest_host_mask);
+}
+static inline unsigned long nested_read_cr4(struct vmcs12 *fields)
+{
+	return (fields->guest_cr4 & ~fields->cr4_guest_host_mask) |
+		(fields->cr4_read_shadow & fields->cr4_guest_host_mask);
+}
+
 static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
 {
 	vmx_decache_cr0_guest_bits(vcpu);
@@ -3437,6 +3471,9 @@ static void set_cr4_guest_host_mask(stru
 	vmx->vcpu.arch.cr4_guest_owned_bits = KVM_CR4_GUEST_OWNED_BITS;
 	if (enable_ept)
 		vmx->vcpu.arch.cr4_guest_owned_bits |= X86_CR4_PGE;
+	if (is_guest_mode(&vmx->vcpu))
+		vmx->vcpu.arch.cr4_guest_owned_bits &=
+			~get_vmcs12(&vmx->vcpu)->cr4_guest_host_mask;
 	vmcs_writel(CR4_GUEST_HOST_MASK, ~vmx->vcpu.arch.cr4_guest_owned_bits);
 }
 
@@ -4735,6 +4772,11 @@ static void free_nested(struct vcpu_vmx 
 		vmx->nested.current_vmptr = -1ull;
 		vmx->nested.current_vmcs12 = NULL;
 	}
+	/* Unpin physical memory we referred to in current vmcs02 */
+	if (vmx->nested.apic_access_page) {
+		nested_release_page(vmx->nested.apic_access_page);
+		vmx->nested.apic_access_page = 0;
+	}
 
 	nested_free_all_saved_vmcss(vmx);
 }
@@ -5809,6 +5851,243 @@ static void vmx_set_supported_cpuid(u32 
 {
 }
 
+/*
+ * prepare_vmcs02 is called when the L1 guest hypervisor runs its nested
+ * L2 guest. L1 has a vmcs for L2 (vmcs12), and this function "merges" it
+ * with L0's requirements for its guest (a.k.a. vmsc01), so we can run the L2
+ * guest in a way that will both be appropriate to L1's requests, and our
+ * needs. In addition to modifying the active vmcs (which is vmcs02), this
+ * function also has additional necessary side-effects, like setting various
+ * vcpu->arch fields.
+ */
+static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	u32 exec_control;
+
+	vmcs_write16(GUEST_ES_SELECTOR, vmcs12->guest_es_selector);
+	vmcs_write16(GUEST_CS_SELECTOR, vmcs12->guest_cs_selector);
+	vmcs_write16(GUEST_SS_SELECTOR, vmcs12->guest_ss_selector);
+	vmcs_write16(GUEST_DS_SELECTOR, vmcs12->guest_ds_selector);
+	vmcs_write16(GUEST_FS_SELECTOR, vmcs12->guest_fs_selector);
+	vmcs_write16(GUEST_GS_SELECTOR, vmcs12->guest_gs_selector);
+	vmcs_write16(GUEST_LDTR_SELECTOR, vmcs12->guest_ldtr_selector);
+	vmcs_write16(GUEST_TR_SELECTOR, vmcs12->guest_tr_selector);
+	vmcs_write32(GUEST_ES_LIMIT, vmcs12->guest_es_limit);
+	vmcs_write32(GUEST_CS_LIMIT, vmcs12->guest_cs_limit);
+	vmcs_write32(GUEST_SS_LIMIT, vmcs12->guest_ss_limit);
+	vmcs_write32(GUEST_DS_LIMIT, vmcs12->guest_ds_limit);
+	vmcs_write32(GUEST_FS_LIMIT, vmcs12->guest_fs_limit);
+	vmcs_write32(GUEST_GS_LIMIT, vmcs12->guest_gs_limit);
+	vmcs_write32(GUEST_LDTR_LIMIT, vmcs12->guest_ldtr_limit);
+	vmcs_write32(GUEST_TR_LIMIT, vmcs12->guest_tr_limit);
+	vmcs_write32(GUEST_GDTR_LIMIT, vmcs12->guest_gdtr_limit);
+	vmcs_write32(GUEST_IDTR_LIMIT, vmcs12->guest_idtr_limit);
+	vmcs_write32(GUEST_ES_AR_BYTES, vmcs12->guest_es_ar_bytes);
+	vmcs_write32(GUEST_CS_AR_BYTES, vmcs12->guest_cs_ar_bytes);
+	vmcs_write32(GUEST_SS_AR_BYTES, vmcs12->guest_ss_ar_bytes);
+	vmcs_write32(GUEST_DS_AR_BYTES, vmcs12->guest_ds_ar_bytes);
+	vmcs_write32(GUEST_FS_AR_BYTES, vmcs12->guest_fs_ar_bytes);
+	vmcs_write32(GUEST_GS_AR_BYTES, vmcs12->guest_gs_ar_bytes);
+	vmcs_write32(GUEST_LDTR_AR_BYTES, vmcs12->guest_ldtr_ar_bytes);
+	vmcs_write32(GUEST_TR_AR_BYTES, vmcs12->guest_tr_ar_bytes);
+	vmcs_writel(GUEST_ES_BASE, vmcs12->guest_es_base);
+	vmcs_writel(GUEST_CS_BASE, vmcs12->guest_cs_base);
+	vmcs_writel(GUEST_SS_BASE, vmcs12->guest_ss_base);
+	vmcs_writel(GUEST_DS_BASE, vmcs12->guest_ds_base);
+	vmcs_writel(GUEST_FS_BASE, vmcs12->guest_fs_base);
+	vmcs_writel(GUEST_GS_BASE, vmcs12->guest_gs_base);
+	vmcs_writel(GUEST_LDTR_BASE, vmcs12->guest_ldtr_base);
+	vmcs_writel(GUEST_TR_BASE, vmcs12->guest_tr_base);
+	vmcs_writel(GUEST_GDTR_BASE, vmcs12->guest_gdtr_base);
+	vmcs_writel(GUEST_IDTR_BASE, vmcs12->guest_idtr_base);
+
+	vmcs_write64(GUEST_IA32_DEBUGCTL, vmcs12->guest_ia32_debugctl);
+	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+		vmcs12->vm_entry_intr_info_field);
+	vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE,
+		vmcs12->vm_entry_exception_error_code);
+	vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
+		vmcs12->vm_entry_instruction_len);
+	vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+		vmcs12->guest_interruptibility_info);
+	vmcs_write32(GUEST_ACTIVITY_STATE, vmcs12->guest_activity_state);
+	vmcs_write32(GUEST_SYSENTER_CS, vmcs12->guest_sysenter_cs);
+	vmcs_writel(GUEST_DR7, vmcs12->guest_dr7);
+	vmcs_writel(GUEST_RFLAGS, vmcs12->guest_rflags);
+	vmcs_writel(GUEST_PENDING_DBG_EXCEPTIONS,
+		vmcs12->guest_pending_dbg_exceptions);
+	vmcs_writel(GUEST_SYSENTER_ESP, vmcs12->guest_sysenter_esp);
+	vmcs_writel(GUEST_SYSENTER_EIP, vmcs12->guest_sysenter_eip);
+
+	vmcs_write64(VMCS_LINK_POINTER, -1ull);
+
+	vmcs_write32(PIN_BASED_VM_EXEC_CONTROL,
+		(vmcs_config.pin_based_exec_ctrl |
+		 vmcs12->pin_based_vm_exec_control));
+
+	/*
+	 * Whether page-faults are trapped is determined by a combination of
+	 * 3 settings: PFEC_MASK, PFEC_MATCH and EXCEPTION_BITMAP.PF.
+	 * If enable_ept, L0 doesn't care about page faults and we should
+	 * set all of these to L1's desires. However, if !enable_ept, L0 does
+	 * care about (at least some) page faults, and because it is not easy
+	 * (if at all possible?) to merge L0 and L1's desires, we simply ask
+	 * to exit on each and every L2 page fault. This is done by setting
+	 * MASK=MATCH=0 and (see below) EB.PF=1.
+	 * Note that below we don't need special code to set EB.PF beyond the
+	 * "or"ing of the EB of vmcs01 and vmcs12, because when enable_ept,
+	 * vmcs01's EB.PF is 0 so the "or" will take vmcs12's value, and when
+	 * !enable_ept, EB.PF is 1, so the "or" will always be 1.
+	 *
+	 * A problem with this approach (when !enable_ept) is that L1 may be
+	 * injected with more page faults than it asked for. This could have
+	 * caused problems, but in practice existing hypervisors don't care.
+	 * To fix this, we will need to emulate the PFEC checking (on the L1
+	 * page tables), using walk_addr(), when injecting PFs to L1.
+	 */
+	vmcs_write32(PAGE_FAULT_ERROR_CODE_MASK,
+		enable_ept ? vmcs12->page_fault_error_code_mask : 0);
+	vmcs_write32(PAGE_FAULT_ERROR_CODE_MATCH,
+		enable_ept ? vmcs12->page_fault_error_code_match : 0);
+
+	if (cpu_has_secondary_exec_ctrls()) {
+		u32 exec_control = vmx_secondary_exec_control(vmx);
+		if (!vmx->rdtscp_enabled)
+			exec_control &= ~SECONDARY_EXEC_RDTSCP;
+		/* Take the following fields only from vmcs12 */
+		exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
+		if (nested_cpu_has(vmcs12,
+				CPU_BASED_ACTIVATE_SECONDARY_CONTROLS))
+			exec_control |= vmcs12->secondary_vm_exec_control;
+
+		if (exec_control & SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES) {
+			/*
+			 * Translate L1 physical address to host physical
+			 * address for vmcs02. Keep the page pinned, so this
+			 * physical address remains valid. We keep a reference
+			 * to it so we can release it later.
+			 */
+			if (vmx->nested.apic_access_page) /* shouldn't happen */
+				nested_release_page(vmx->nested.apic_access_page);
+			vmx->nested.apic_access_page =
+				nested_get_page(vcpu, vmcs12->apic_access_addr);
+			/*
+			 * If translation failed, no matter: This feature asks
+			 * to exit when accessing the given address, and if it
+			 * can never be accessed, this feature won't do
+			 * anything anyway.
+			 */
+			if (!vmx->nested.apic_access_page)
+				exec_control &=
+				  ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
+			else
+				vmcs_write64(APIC_ACCESS_ADDR,
+				  page_to_phys(vmx->nested.apic_access_page));
+		}
+
+		vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
+	}
+
+
+	/*
+	 * Set host-state according to L0's settings (vmcs12 is irrelevant here)
+	 * Some constant fields are set here by vmx_set_constant_host_state().
+	 * Other fields are different per CPU, and will be set later when
+	 * vmx_vcpu_load() is called, and when vmx_save_host_state() is called.
+	 */
+	vmx_set_constant_host_state();
+
+	/*
+	 * HOST_RSP is normally set correctly in vmx_vcpu_run() just before
+	 * entry, but only if the current (host) sp changed from the value
+	 * we wrote last (vmx->host_rsp). This cache is no longer relevant
+	 * if we switch vmcs, and rather than hold a separate cache per vmcs,
+	 * here we just force the write to happen on entry.
+	 */
+	vmx->host_rsp = 0;
+
+	exec_control = vmx_exec_control(vmx); /* L0's desires */
+	exec_control &= ~CPU_BASED_VIRTUAL_INTR_PENDING;
+	exec_control &= ~CPU_BASED_VIRTUAL_NMI_PENDING;
+	exec_control &= ~CPU_BASED_TPR_SHADOW;
+	exec_control |= vmcs12->cpu_based_vm_exec_control;
+	/*
+	 * Merging of IO and MSR bitmaps not currently supported.
+	 * Rather, exit every time.
+	 */
+	exec_control &= ~CPU_BASED_USE_MSR_BITMAPS;
+	exec_control &= ~CPU_BASED_USE_IO_BITMAPS;
+	exec_control |= CPU_BASED_UNCOND_IO_EXITING;
+
+	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, exec_control);
+
+	/* EXCEPTION_BITMAP and CR0_GUEST_HOST_MASK should basically be the
+	 * bitwise-or of what L1 wants to trap for L2, and what we want to
+	 * trap. Note that CR0.TS also needs updating - we do this later.
+	 */
+	update_exception_bitmap(vcpu);
+	vcpu->arch.cr0_guest_owned_bits &= ~vmcs12->cr0_guest_host_mask;
+	vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
+
+	/* Note: IA32_MODE, LOAD_IA32_EFER are modified by vmx_set_efer below */
+	vmcs_write32(VM_EXIT_CONTROLS,
+		vmcs12->vm_exit_controls | vmcs_config.vmexit_ctrl);
+	vmcs_write32(VM_ENTRY_CONTROLS, vmcs12->vm_entry_controls |
+		(vmcs_config.vmentry_ctrl & ~VM_ENTRY_IA32E_MODE));
+
+	if (vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_PAT)
+		vmcs_write64(GUEST_IA32_PAT, vmcs12->guest_ia32_pat);
+	else if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT)
+		vmcs_write64(GUEST_IA32_PAT, vmx->vcpu.arch.pat);
+
+
+	set_cr4_guest_host_mask(vmx);
+
+	vmcs_write64(TSC_OFFSET,
+		vmx->nested.vmcs01_tsc_offset + vmcs12->tsc_offset);
+
+	if (enable_vpid) {
+		/*
+		 * Trivially support vpid by letting L2s share their parent
+		 * L1's vpid. TODO: move to a more elaborate solution, giving
+		 * each L2 its own vpid and exposing the vpid feature to L1.
+		 */
+		vmcs_write16(VIRTUAL_PROCESSOR_ID, vmx->vpid);
+		vmx_flush_tlb(vcpu);
+	}
+
+	if (vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_EFER)
+		vcpu->arch.efer = vmcs12->guest_ia32_efer;
+	if (vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE)
+		vcpu->arch.efer |= (EFER_LMA | EFER_LME);
+	else
+		vcpu->arch.efer &= ~(EFER_LMA | EFER_LME);
+	/* Note: modifies VM_ENTRY/EXIT_CONTROLS and GUEST/HOST_IA32_EFER */
+	vmx_set_efer(vcpu, vcpu->arch.efer);
+
+	/*
+	 * This sets GUEST_CR0 to vmcs12->guest_cr0, with possibly a modified
+	 * TS bit (for lazy fpu) and bits which we consider mandatory enabled.
+	 * The CR0_READ_SHADOW is what L2 should have expected to read given
+	 * the specifications by L1; It's not enough to take
+	 * vmcs12->cr0_read_shadow because on our cr0_guest_host_mask we we
+	 * have more bits than L1 expected.
+	 */
+	vmx_set_cr0(vcpu, vmcs12->guest_cr0);
+	vmcs_writel(CR0_READ_SHADOW, nested_read_cr0(vmcs12));
+
+	vmx_set_cr4(vcpu, vmcs12->guest_cr4);
+	vmcs_writel(CR4_READ_SHADOW, nested_read_cr4(vmcs12));
+
+	/* shadow page tables on either EPT or shadow page tables */
+	kvm_set_cr3(vcpu, vmcs12->guest_cr3);
+	kvm_mmu_reset_context(vcpu);
+
+	kvm_register_write(vcpu, VCPU_REGS_RSP, vmcs12->guest_rsp);
+	kvm_register_write(vcpu, VCPU_REGS_RIP, vmcs12->guest_rip);
+}
+
 static int vmx_check_intercept(struct kvm_vcpu *vcpu,
 			       struct x86_instruction_info *info,
 			       enum x86_intercept_stage stage)

[PATCH 18/31] nVMX: Implement VMLAUNCH and VMRESUME

[Nadav Har'El]

Implement the VMLAUNCH and VMRESUME instructions, allowing a guest
hypervisor to run its own guests.

This patch does not include some of the necessary validity checks on
vmcs12 fields before the entry. These will appear in a separate patch
below.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   65 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 63 insertions(+), 2 deletions(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:03.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:03.000000000 +0300
@@ -4942,6 +4942,21 @@ static int handle_vmclear(struct kvm_vcp
 	return 1;
 }
 
+static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch);
+
+/* Emulate the VMLAUNCH instruction */
+static int handle_vmlaunch(struct kvm_vcpu *vcpu)
+{
+	return nested_vmx_run(vcpu, true);
+}
+
+/* Emulate the VMRESUME instruction */
+static int handle_vmresume(struct kvm_vcpu *vcpu)
+{
+
+	return nested_vmx_run(vcpu, false);
+}
+
 enum vmcs_field_type {
 	VMCS_FIELD_TYPE_U16 = 0,
 	VMCS_FIELD_TYPE_U64 = 1,
@@ -5239,11 +5254,11 @@ static int (*kvm_vmx_exit_handlers[])(st
 	[EXIT_REASON_INVLPG]		      = handle_invlpg,
 	[EXIT_REASON_VMCALL]                  = handle_vmcall,
 	[EXIT_REASON_VMCLEAR]	              = handle_vmclear,
-	[EXIT_REASON_VMLAUNCH]                = handle_vmx_insn,
+	[EXIT_REASON_VMLAUNCH]                = handle_vmlaunch,
 	[EXIT_REASON_VMPTRLD]                 = handle_vmptrld,
 	[EXIT_REASON_VMPTRST]                 = handle_vmptrst,
 	[EXIT_REASON_VMREAD]                  = handle_vmread,
-	[EXIT_REASON_VMRESUME]                = handle_vmx_insn,
+	[EXIT_REASON_VMRESUME]                = handle_vmresume,
 	[EXIT_REASON_VMWRITE]                 = handle_vmwrite,
 	[EXIT_REASON_VMOFF]                   = handle_vmoff,
 	[EXIT_REASON_VMON]                    = handle_vmon,
@@ -6088,6 +6103,52 @@ static void prepare_vmcs02(struct kvm_vc
 	kvm_register_write(vcpu, VCPU_REGS_RIP, vmcs12->guest_rip);
 }
 
+/*
+ * nested_vmx_run() handles a nested entry, i.e., a VMLAUNCH or VMRESUME on L1
+ * for running an L2 nested guest.
+ */
+static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
+{
+	struct vmcs12 *vmcs12;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	int cpu;
+	struct loaded_vmcs *vmcs02;
+
+	if (!nested_vmx_check_permission(vcpu) ||
+	    !nested_vmx_check_vmcs12(vcpu))
+		return 1;
+
+	skip_emulated_instruction(vcpu);
+	vmcs12 = get_vmcs12(vcpu);
+
+	vmcs02 = nested_get_current_vmcs02(vmx);
+	if (!vmcs02)
+		return -ENOMEM;
+
+	enter_guest_mode(vcpu);
+
+	vmx->nested.vmcs01_tsc_offset = vmcs_read64(TSC_OFFSET);
+
+	cpu = get_cpu();
+	vmx->loaded_vmcs = vmcs02;
+	vmx_vcpu_put(vcpu);
+	vmx_vcpu_load(vcpu, cpu);
+	vcpu->cpu = cpu;
+	put_cpu();
+
+	vmcs12->launch_state = 1;
+
+	prepare_vmcs02(vcpu, vmcs12);
+
+	/*
+	 * Note no nested_vmx_succeed or nested_vmx_fail here. At this point
+	 * we are no longer running L1, and VMLAUNCH/VMRESUME has not yet
+	 * returned as far as L1 is concerned. It will only return (and set
+	 * the success flag) when L2 exits (see nested_vmx_vmexit()).
+	 */
+	return 1;
+}
+
 static int vmx_check_intercept(struct kvm_vcpu *vcpu,
 			       struct x86_instruction_info *info,
 			       enum x86_intercept_stage stage)

[PATCH 19/31] nVMX: No need for handle_vmx_insn function any more

[Nadav Har'El]

Before nested VMX support, the exit handler for a guest executing a VMX
instruction (vmclear, vmlaunch, vmptrld, vmptrst, vmread, vmread, vmresume,
vmwrite, vmon, vmoff), was handle_vmx_insn(). This handler simply threw a #UD
exception. Now that all these exit reasons are properly handled (and emulate
the respective VMX instruction), nothing calls this dummy handler and it can
be removed.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |    6 ------
 1 file changed, 6 deletions(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:04.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:04.000000000 +0300
@@ -4308,12 +4308,6 @@ static int handle_vmcall(struct kvm_vcpu
 	return 1;
 }
 
-static int handle_vmx_insn(struct kvm_vcpu *vcpu)
-{
-	kvm_queue_exception(vcpu, UD_VECTOR);
-	return 1;
-}
-
 static int handle_invd(struct kvm_vcpu *vcpu)
 {
 	return emulate_instruction(vcpu, 0) == EMULATE_DONE;

[PATCH 20/31] nVMX: Exiting from L2 to L1

[Nadav Har'El]

This patch implements nested_vmx_vmexit(), called when the nested L2 guest
exits and we want to run its L1 parent and let it handle this exit.

Note that this will not necessarily be called on every L2 exit. L0 may decide
to handle a particular exit on its own, without L1's involvement; In that
case, L0 will handle the exit, and resume running L2, without running L1 and
without calling nested_vmx_vmexit(). The logic for deciding whether to handle
a particular exit in L1 or in L0, i.e., whether to call nested_vmx_vmexit(),
will appear in a separate patch below.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/include/asm/vmx.h |    4 
 arch/x86/kvm/vmx.c         |  262 +++++++++++++++++++++++++++++++++++
 2 files changed, 266 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:05.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:05.000000000 +0300
@@ -6143,6 +6143,268 @@ static int nested_vmx_run(struct kvm_vcp
 	return 1;
 }
 
+/*
+ * On a nested exit from L2 to L1, vmcs12.guest_cr0 might not be up-to-date
+ * because L2 may have changed some cr0 bits directly (CRO_GUEST_HOST_MASK).
+ * This function returns the new value we should put in vmcs12.guest_cr0.
+ * It's not enough to just return the vmcs02 GUEST_CR0. Rather,
+ *  1. Bits that neither L0 nor L1 trapped, were set directly by L2 and are now
+ *     available in vmcs02 GUEST_CR0. (Note: It's enough to check that L0
+ *     didn't trap the bit, because if L1 did, so would L0).
+ *  2. Bits that L1 asked to trap (and therefore L0 also did) could not have
+ *     been modified by L2, and L1 knows it. So just leave the old value of
+ *     the bit from vmcs12.guest_cr0. Note that the bit from vmcs02 GUEST_CR0
+ *     isn't relevant, because if L0 traps this bit it can set it to anything.
+ *  3. Bits that L1 didn't trap, but L0 did. L1 believes the guest could have
+ *     changed these bits, and therefore they need to be updated, but L0
+ *     didn't necessarily allow them to be changed in GUEST_CR0 - and rather
+ *     put them in vmcs02 CR0_READ_SHADOW. So take these bits from there.
+ */
+static inline unsigned long
+vmcs12_guest_cr0(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
+{
+	return
+	/*1*/	(vmcs_readl(GUEST_CR0) & vcpu->arch.cr0_guest_owned_bits) |
+	/*2*/	(vmcs12->guest_cr0 & vmcs12->cr0_guest_host_mask) |
+	/*3*/	(vmcs_readl(CR0_READ_SHADOW) & ~(vmcs12->cr0_guest_host_mask |
+			vcpu->arch.cr0_guest_owned_bits));
+}
+
+static inline unsigned long
+vmcs12_guest_cr4(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
+{
+	return
+	/*1*/	(vmcs_readl(GUEST_CR4) & vcpu->arch.cr4_guest_owned_bits) |
+	/*2*/	(vmcs12->guest_cr4 & vmcs12->cr4_guest_host_mask) |
+	/*3*/	(vmcs_readl(CR4_READ_SHADOW) & ~(vmcs12->cr4_guest_host_mask |
+			vcpu->arch.cr4_guest_owned_bits));
+}
+
+/*
+ * prepare_vmcs12 is part of what we need to do when the nested L2 guest exits
+ * and we want to prepare to run its L1 parent. L1 keeps a vmcs for L2 (vmcs12),
+ * and this function updates it to reflect the changes to the guest state while
+ * L2 was running (and perhaps made some exits which were handled directly by L0
+ * without going back to L1), and to reflect the exit reason.
+ * Note that we do not have to copy here all VMCS fields, just those that
+ * could have changed by the L2 guest or the exit - i.e., the guest-state and
+ * exit-information fields only. Other fields are modified by L1 with VMWRITE,
+ * which already writes to vmcs12 directly.
+ */
+void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
+{
+	/* update guest state fields: */
+	vmcs12->guest_cr0 = vmcs12_guest_cr0(vcpu, vmcs12);
+	vmcs12->guest_cr4 = vmcs12_guest_cr4(vcpu, vmcs12);
+
+	kvm_get_dr(vcpu, 7, (unsigned long *)&vmcs12->guest_dr7);
+	vmcs12->guest_rsp = kvm_register_read(vcpu, VCPU_REGS_RSP);
+	vmcs12->guest_rip = kvm_register_read(vcpu, VCPU_REGS_RIP);
+	vmcs12->guest_rflags = vmcs_readl(GUEST_RFLAGS);
+
+	vmcs12->guest_es_selector = vmcs_read16(GUEST_ES_SELECTOR);
+	vmcs12->guest_cs_selector = vmcs_read16(GUEST_CS_SELECTOR);
+	vmcs12->guest_ss_selector = vmcs_read16(GUEST_SS_SELECTOR);
+	vmcs12->guest_ds_selector = vmcs_read16(GUEST_DS_SELECTOR);
+	vmcs12->guest_fs_selector = vmcs_read16(GUEST_FS_SELECTOR);
+	vmcs12->guest_gs_selector = vmcs_read16(GUEST_GS_SELECTOR);
+	vmcs12->guest_ldtr_selector = vmcs_read16(GUEST_LDTR_SELECTOR);
+	vmcs12->guest_tr_selector = vmcs_read16(GUEST_TR_SELECTOR);
+	vmcs12->guest_es_limit = vmcs_read32(GUEST_ES_LIMIT);
+	vmcs12->guest_cs_limit = vmcs_read32(GUEST_CS_LIMIT);
+	vmcs12->guest_ss_limit = vmcs_read32(GUEST_SS_LIMIT);
+	vmcs12->guest_ds_limit = vmcs_read32(GUEST_DS_LIMIT);
+	vmcs12->guest_fs_limit = vmcs_read32(GUEST_FS_LIMIT);
+	vmcs12->guest_gs_limit = vmcs_read32(GUEST_GS_LIMIT);
+	vmcs12->guest_ldtr_limit = vmcs_read32(GUEST_LDTR_LIMIT);
+	vmcs12->guest_tr_limit = vmcs_read32(GUEST_TR_LIMIT);
+	vmcs12->guest_gdtr_limit = vmcs_read32(GUEST_GDTR_LIMIT);
+	vmcs12->guest_idtr_limit = vmcs_read32(GUEST_IDTR_LIMIT);
+	vmcs12->guest_es_ar_bytes = vmcs_read32(GUEST_ES_AR_BYTES);
+	vmcs12->guest_cs_ar_bytes = vmcs_read32(GUEST_CS_AR_BYTES);
+	vmcs12->guest_ss_ar_bytes = vmcs_read32(GUEST_SS_AR_BYTES);
+	vmcs12->guest_ds_ar_bytes = vmcs_read32(GUEST_DS_AR_BYTES);
+	vmcs12->guest_fs_ar_bytes = vmcs_read32(GUEST_FS_AR_BYTES);
+	vmcs12->guest_gs_ar_bytes = vmcs_read32(GUEST_GS_AR_BYTES);
+	vmcs12->guest_ldtr_ar_bytes = vmcs_read32(GUEST_LDTR_AR_BYTES);
+	vmcs12->guest_tr_ar_bytes = vmcs_read32(GUEST_TR_AR_BYTES);
+	vmcs12->guest_es_base = vmcs_readl(GUEST_ES_BASE);
+	vmcs12->guest_cs_base = vmcs_readl(GUEST_CS_BASE);
+	vmcs12->guest_ss_base = vmcs_readl(GUEST_SS_BASE);
+	vmcs12->guest_ds_base = vmcs_readl(GUEST_DS_BASE);
+	vmcs12->guest_fs_base = vmcs_readl(GUEST_FS_BASE);
+	vmcs12->guest_gs_base = vmcs_readl(GUEST_GS_BASE);
+	vmcs12->guest_ldtr_base = vmcs_readl(GUEST_LDTR_BASE);
+	vmcs12->guest_tr_base = vmcs_readl(GUEST_TR_BASE);
+	vmcs12->guest_gdtr_base = vmcs_readl(GUEST_GDTR_BASE);
+	vmcs12->guest_idtr_base = vmcs_readl(GUEST_IDTR_BASE);
+
+	vmcs12->guest_activity_state = vmcs_read32(GUEST_ACTIVITY_STATE);
+	vmcs12->guest_interruptibility_info =
+		vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	vmcs12->guest_pending_dbg_exceptions =
+		vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS);
+
+	/* TODO: These cannot have changed unless we have MSR bitmaps and
+	 * the relevant bit asks not to trap the change */
+	vmcs12->guest_ia32_debugctl = vmcs_read64(GUEST_IA32_DEBUGCTL);
+	if (vmcs12->vm_entry_controls & VM_EXIT_SAVE_IA32_PAT)
+		vmcs12->guest_ia32_pat = vmcs_read64(GUEST_IA32_PAT);
+	vmcs12->guest_sysenter_cs = vmcs_read32(GUEST_SYSENTER_CS);
+	vmcs12->guest_sysenter_esp = vmcs_readl(GUEST_SYSENTER_ESP);
+	vmcs12->guest_sysenter_eip = vmcs_readl(GUEST_SYSENTER_EIP);
+
+	/* update exit information fields: */
+
+	vmcs12->vm_exit_reason  = vmcs_read32(VM_EXIT_REASON);
+	vmcs12->exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+
+	vmcs12->vm_exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+	vmcs12->vm_exit_intr_error_code = vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
+	vmcs12->idt_vectoring_info_field =
+		vmcs_read32(IDT_VECTORING_INFO_FIELD);
+	vmcs12->idt_vectoring_error_code =
+		vmcs_read32(IDT_VECTORING_ERROR_CODE);
+	vmcs12->vm_exit_instruction_len = vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
+	vmcs12->vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
+
+	/* clear vm-entry fields which are to be cleared on exit */
+	if (!(vmcs12->vm_exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY))
+		vmcs12->vm_entry_intr_info_field &= ~INTR_INFO_VALID_MASK;
+}
+
+/*
+ * A part of what we need to when the nested L2 guest exits and we want to
+ * run its L1 parent, is to reset L1's guest state to the host state specified
+ * in vmcs12.
+ * This function is to be called not only on normal nested exit, but also on
+ * a nested entry failure, as explained in Intel's spec, 3B.23.7 ("VM-Entry
+ * Failures During or After Loading Guest State").
+ * This function should be called when the active VMCS is L1's (vmcs01).
+ */
+void load_vmcs12_host_state(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
+{
+	if (vmcs12->vm_exit_controls & VM_EXIT_LOAD_IA32_EFER)
+		vcpu->arch.efer = vmcs12->host_ia32_efer;
+	if (vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE)
+		vcpu->arch.efer |= (EFER_LMA | EFER_LME);
+	else
+		vcpu->arch.efer &= ~(EFER_LMA | EFER_LME);
+	vmx_set_efer(vcpu, vcpu->arch.efer);
+
+	kvm_register_write(vcpu, VCPU_REGS_RSP, vmcs12->host_rsp);
+	kvm_register_write(vcpu, VCPU_REGS_RIP, vmcs12->host_rip);
+	/*
+	 * Note that calling vmx_set_cr0 is important, even if cr0 hasn't
+	 * actually changed, because it depends on the current state of
+	 * fpu_active (which may have changed).
+	 * Note that vmx_set_cr0 refers to efer set above.
+	 */
+	kvm_set_cr0(vcpu, vmcs12->host_cr0);
+	/*
+	 * If we did fpu_activate()/fpu_deactivate() during L2's run, we need
+	 * to apply the same changes to L1's vmcs. We just set cr0 correctly,
+	 * but we also need to update cr0_guest_host_mask and exception_bitmap.
+	 */
+	update_exception_bitmap(vcpu);
+	vcpu->arch.cr0_guest_owned_bits = (vcpu->fpu_active ? X86_CR0_TS : 0);
+	vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
+
+	/*
+	 * Note that CR4_GUEST_HOST_MASK is already set in the original vmcs01
+	 * (KVM doesn't change it)- no reason to call set_cr4_guest_host_mask();
+	 */
+	vcpu->arch.cr4_guest_owned_bits = ~vmcs_readl(CR4_GUEST_HOST_MASK);
+	kvm_set_cr4(vcpu, vmcs12->host_cr4);
+
+	/* shadow page tables on either EPT or shadow page tables */
+	kvm_set_cr3(vcpu, vmcs12->host_cr3);
+	kvm_mmu_reset_context(vcpu);
+
+	if (enable_vpid) {
+		/*
+		 * Trivially support vpid by letting L2s share their parent
+		 * L1's vpid. TODO: move to a more elaborate solution, giving
+		 * each L2 its own vpid and exposing the vpid feature to L1.
+		 */
+		vmx_flush_tlb(vcpu);
+	}
+
+
+	vmcs_write32(GUEST_SYSENTER_CS, vmcs12->host_ia32_sysenter_cs);
+	vmcs_writel(GUEST_SYSENTER_ESP, vmcs12->host_ia32_sysenter_esp);
+	vmcs_writel(GUEST_SYSENTER_EIP, vmcs12->host_ia32_sysenter_eip);
+	vmcs_writel(GUEST_IDTR_BASE, vmcs12->host_idtr_base);
+	vmcs_writel(GUEST_GDTR_BASE, vmcs12->host_gdtr_base);
+	vmcs_writel(GUEST_TR_BASE, vmcs12->host_tr_base);
+	vmcs_writel(GUEST_GS_BASE, vmcs12->host_gs_base);
+	vmcs_writel(GUEST_FS_BASE, vmcs12->host_fs_base);
+	vmcs_write16(GUEST_ES_SELECTOR, vmcs12->host_es_selector);
+	vmcs_write16(GUEST_CS_SELECTOR, vmcs12->host_cs_selector);
+	vmcs_write16(GUEST_SS_SELECTOR, vmcs12->host_ss_selector);
+	vmcs_write16(GUEST_DS_SELECTOR, vmcs12->host_ds_selector);
+	vmcs_write16(GUEST_FS_SELECTOR, vmcs12->host_fs_selector);
+	vmcs_write16(GUEST_GS_SELECTOR, vmcs12->host_gs_selector);
+	vmcs_write16(GUEST_TR_SELECTOR, vmcs12->host_tr_selector);
+
+	if (vmcs12->vm_exit_controls & VM_EXIT_LOAD_IA32_PAT)
+		vmcs_write64(GUEST_IA32_PAT, vmcs12->host_ia32_pat);
+	if (vmcs12->vm_exit_controls & VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL)
+		vmcs_write64(GUEST_IA32_PERF_GLOBAL_CTRL,
+			vmcs12->host_ia32_perf_global_ctrl);
+}
+
+/*
+ * Emulate an exit from nested guest (L2) to L1, i.e., prepare to run L1
+ * and modify vmcs12 to make it see what it would expect to see there if
+ * L2 was its real guest. Must only be called when in L2 (is_guest_mode())
+ */
+static void nested_vmx_vmexit(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	int cpu;
+	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+
+	leave_guest_mode(vcpu);
+	prepare_vmcs12(vcpu, vmcs12);
+
+	cpu = get_cpu();
+	vmx->loaded_vmcs = &vmx->vmcs01;
+	vmx_vcpu_put(vcpu);
+	vmx_vcpu_load(vcpu, cpu);
+	vcpu->cpu = cpu;
+	put_cpu();
+
+	/* if no vmcs02 cache requested, remove the one we used */
+	if (VMCS02_POOL_SIZE == 0)
+		nested_free_vmcs02(vmx, vmx->nested.current_vmptr);
+
+	load_vmcs12_host_state(vcpu, vmcs12);
+
+	/* Update TSC_OFFSET if vmx_adjust_tsc_offset() was used while L2 ran */
+	vmcs_write64(TSC_OFFSET, vmx->nested.vmcs01_tsc_offset);
+
+	/* This is needed for same reason as it was needed in prepare_vmcs02 */
+	vmx->host_rsp = 0;
+
+	/* Unpin physical memory we referred to in vmcs02 */
+	if (vmx->nested.apic_access_page) {
+		nested_release_page(vmx->nested.apic_access_page);
+		vmx->nested.apic_access_page = 0;
+	}
+
+	/*
+	 * Exiting from L2 to L1, we're now back to L1 which thinks it just
+	 * finished a VMLAUNCH or VMRESUME instruction, so we need to set the
+	 * success or failure flag accordingly.
+	 */
+	if (unlikely(vmx->fail)) {
+		vmx->fail = 0;
+		nested_vmx_failValid(vcpu, vmcs_read32(VM_INSTRUCTION_ERROR));
+	} else
+		nested_vmx_succeed(vcpu);
+}
+
 static int vmx_check_intercept(struct kvm_vcpu *vcpu,
 			       struct x86_instruction_info *info,
 			       enum x86_intercept_stage stage)
--- .before/arch/x86/include/asm/vmx.h	2011-05-25 22:41:05.000000000 +0300
+++ .after/arch/x86/include/asm/vmx.h	2011-05-25 22:41:05.000000000 +0300
@@ -132,6 +132,8 @@ enum vmcs_field {
 	GUEST_IA32_PAT_HIGH		= 0x00002805,
 	GUEST_IA32_EFER			= 0x00002806,
 	GUEST_IA32_EFER_HIGH		= 0x00002807,
+	GUEST_IA32_PERF_GLOBAL_CTRL	= 0x00002808,
+	GUEST_IA32_PERF_GLOBAL_CTRL_HIGH= 0x00002809,
 	GUEST_PDPTR0                    = 0x0000280a,
 	GUEST_PDPTR0_HIGH               = 0x0000280b,
 	GUEST_PDPTR1                    = 0x0000280c,
@@ -144,6 +146,8 @@ enum vmcs_field {
 	HOST_IA32_PAT_HIGH		= 0x00002c01,
 	HOST_IA32_EFER			= 0x00002c02,
 	HOST_IA32_EFER_HIGH		= 0x00002c03,
+	HOST_IA32_PERF_GLOBAL_CTRL	= 0x00002c04,
+	HOST_IA32_PERF_GLOBAL_CTRL_HIGH	= 0x00002c05,
 	PIN_BASED_VM_EXEC_CONTROL       = 0x00004000,
 	CPU_BASED_VM_EXEC_CONTROL       = 0x00004002,
 	EXCEPTION_BITMAP                = 0x00004004,

[PATCH 21/31] nVMX: vmcs12 checks on nested entry

[Nadav Har'El]

This patch adds a bunch of tests of the validity of the vmcs12 fields,
according to what the VMX spec and our implementation allows. If fields
we cannot (or don't want to) honor are discovered, an entry failure is
emulated.

According to the spec, there are two types of entry failures: If the problem
was in vmcs12's host state or control fields, the VMLAUNCH instruction simply
fails. But a problem is found in the guest state, the behavior is more
similar to that of an exit.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/include/asm/vmx.h |    8 ++
 arch/x86/kvm/vmx.c         |  101 +++++++++++++++++++++++++++++++++++
 2 files changed, 109 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:06.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:06.000000000 +0300
@@ -865,6 +865,10 @@ static inline bool nested_cpu_has2(struc
 		(vmcs12->secondary_vm_exec_control & bit);
 }
 
+static void nested_vmx_entry_failure(struct kvm_vcpu *vcpu,
+			struct vmcs12 *vmcs12,
+			u32 reason, unsigned long qualification);
+
 static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 {
 	int i;
@@ -6115,6 +6119,86 @@ static int nested_vmx_run(struct kvm_vcp
 	skip_emulated_instruction(vcpu);
 	vmcs12 = get_vmcs12(vcpu);
 
+	/*
+	 * The nested entry process starts with enforcing various prerequisites
+	 * on vmcs12 as required by the Intel SDM, and act appropriately when
+	 * they fail: As the SDM explains, some conditions should cause the
+	 * instruction to fail, while others will cause the instruction to seem
+	 * to succeed, but return an EXIT_REASON_INVALID_STATE.
+	 * To speed up the normal (success) code path, we should avoid checking
+	 * for misconfigurations which will anyway be caught by the processor
+	 * when using the merged vmcs02.
+	 */
+	if (vmcs12->launch_state == launch) {
+		nested_vmx_failValid(vcpu,
+			launch ? VMXERR_VMLAUNCH_NONCLEAR_VMCS
+			       : VMXERR_VMRESUME_NONLAUNCHED_VMCS);
+		return 1;
+	}
+
+	if ((vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_MSR_BITMAPS) &&
+			!IS_ALIGNED(vmcs12->msr_bitmap, PAGE_SIZE)) {
+		/*TODO: Also verify bits beyond physical address width are 0*/
+		nested_vmx_failValid(vcpu, VMXERR_ENTRY_INVALID_CONTROL_FIELD);
+		return 1;
+	}
+
+	if (nested_cpu_has2(vmcs12, SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES) &&
+			!IS_ALIGNED(vmcs12->apic_access_addr, PAGE_SIZE)) {
+		/*TODO: Also verify bits beyond physical address width are 0*/
+		nested_vmx_failValid(vcpu, VMXERR_ENTRY_INVALID_CONTROL_FIELD);
+		return 1;
+	}
+
+	if (vmcs12->vm_entry_msr_load_count > 0 ||
+	    vmcs12->vm_exit_msr_load_count > 0 ||
+	    vmcs12->vm_exit_msr_store_count > 0) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING
+			  "%s: VMCS MSR_{LOAD,STORE} unsupported\n", __func__);
+		nested_vmx_failValid(vcpu, VMXERR_ENTRY_INVALID_CONTROL_FIELD);
+		return 1;
+	}
+
+	if (!vmx_control_verify(vmcs12->cpu_based_vm_exec_control,
+	      nested_vmx_procbased_ctls_low, nested_vmx_procbased_ctls_high) ||
+	    !vmx_control_verify(vmcs12->secondary_vm_exec_control,
+	      nested_vmx_secondary_ctls_low, nested_vmx_secondary_ctls_high) ||
+	    !vmx_control_verify(vmcs12->pin_based_vm_exec_control,
+	      nested_vmx_pinbased_ctls_low, nested_vmx_pinbased_ctls_high) ||
+	    !vmx_control_verify(vmcs12->vm_exit_controls,
+	      nested_vmx_exit_ctls_low, nested_vmx_exit_ctls_high) ||
+	    !vmx_control_verify(vmcs12->vm_entry_controls,
+	      nested_vmx_entry_ctls_low, nested_vmx_entry_ctls_high))
+	{
+		nested_vmx_failValid(vcpu, VMXERR_ENTRY_INVALID_CONTROL_FIELD);
+		return 1;
+	}
+
+	if (((vmcs12->host_cr0 & VMXON_CR0_ALWAYSON) != VMXON_CR0_ALWAYSON) ||
+	    ((vmcs12->host_cr4 & VMXON_CR4_ALWAYSON) != VMXON_CR4_ALWAYSON)) {
+		nested_vmx_failValid(vcpu,
+			VMXERR_ENTRY_INVALID_HOST_STATE_FIELD);
+		return 1;
+	}
+
+	if (((vmcs12->guest_cr0 & VMXON_CR0_ALWAYSON) != VMXON_CR0_ALWAYSON) ||
+	    ((vmcs12->guest_cr4 & VMXON_CR4_ALWAYSON) != VMXON_CR4_ALWAYSON)) {
+		nested_vmx_entry_failure(vcpu, vmcs12,
+			EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT);
+		return 1;
+	}
+	if (vmcs12->vmcs_link_pointer != -1ull) {
+		nested_vmx_entry_failure(vcpu, vmcs12,
+			EXIT_REASON_INVALID_STATE, ENTRY_FAIL_VMCS_LINK_PTR);
+		return 1;
+	}
+
+	/*
+	 * We're finally done with prerequisite checking, and can start with
+	 * the nested entry.
+	 */
+
 	vmcs02 = nested_get_current_vmcs02(vmx);
 	if (!vmcs02)
 		return -ENOMEM;
@@ -6405,6 +6489,23 @@ static void nested_vmx_vmexit(struct kvm
 		nested_vmx_succeed(vcpu);
 }
 
+/*
+ * L1's failure to enter L2 is a subset of a normal exit, as explained in
+ * 23.7 "VM-entry failures during or after loading guest state" (this also
+ * lists the acceptable exit-reason and exit-qualification parameters).
+ * It should only be called before L2 actually succeeded to run, and when
+ * vmcs01 is current (it doesn't leave_guest_mode() or switch vmcss).
+ */
+static void nested_vmx_entry_failure(struct kvm_vcpu *vcpu,
+			struct vmcs12 *vmcs12,
+			u32 reason, unsigned long qualification)
+{
+	load_vmcs12_host_state(vcpu, vmcs12);
+	vmcs12->vm_exit_reason = reason | VMX_EXIT_REASONS_FAILED_VMENTRY;
+	vmcs12->exit_qualification = qualification;
+	nested_vmx_succeed(vcpu);
+}
+
 static int vmx_check_intercept(struct kvm_vcpu *vcpu,
 			       struct x86_instruction_info *info,
 			       enum x86_intercept_stage stage)
--- .before/arch/x86/include/asm/vmx.h	2011-05-25 22:41:06.000000000 +0300
+++ .after/arch/x86/include/asm/vmx.h	2011-05-25 22:41:07.000000000 +0300
@@ -431,6 +431,14 @@ struct vmx_msr_entry {
 } __aligned(16);
 
 /*
+ * Exit Qualifications for entry failure during or after loading guest state
+ */
+#define ENTRY_FAIL_DEFAULT		0
+#define ENTRY_FAIL_PDPTE		2
+#define ENTRY_FAIL_NMI			3
+#define ENTRY_FAIL_VMCS_LINK_PTR	4
+
+/*
  * VM-instruction error numbers
  */
 enum vm_instruction_error_number {

[PATCH 22/31] nVMX: Deciding if L0 or L1 should handle an L2 exit

[Nadav Har'El]

This patch contains the logic of whether an L2 exit should be handled by L0
and then L2 should be resumed, or whether L1 should be run to handle this
exit (using the nested_vmx_vmexit() function of the previous patch).

The basic idea is to let L1 handle the exit only if it actually asked to
trap this sort of event. For example, when L2 exits on a change to CR0,
we check L1's CR0_GUEST_HOST_MASK to see if L1 expressed interest in any
bit which changed; If it did, we exit to L1. But if it didn't it means that
it is we (L0) that wished to trap this event, so we handle it ourselves.

The next two patches add additional logic of what to do when an interrupt or
exception is injected: Does L0 need to do it, should we exit to L1 to do it,
or should we resume L2 and keep the exception to be injected later.

We keep a new flag, "nested_run_pending", which can override the decision of
which should run next, L1 or L2. nested_run_pending=1 means that we *must* run
L2 next, not L1. This is necessary in particular when L1 did a VMLAUNCH of L2
and therefore expects L2 to be run (and perhaps be injected with an event it
specified, etc.). Nested_run_pending is especially intended to avoid switching
to L1 in the injection decision-point described above.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |  253 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 252 insertions(+), 1 deletion(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:07.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:07.000000000 +0300
@@ -346,6 +346,8 @@ struct nested_vmx {
 	struct list_head vmcs02_pool;
 	int vmcs02_num;
 	u64 vmcs01_tsc_offset;
+	/* L2 must run next, and mustn't decide to exit to L1. */
+	bool nested_run_pending;
 	/*
 	 * Guest pages referred to in vmcs02 with host-physical pointers, so
 	 * we must keep them pinned while L2 runs.
@@ -865,6 +867,19 @@ static inline bool nested_cpu_has2(struc
 		(vmcs12->secondary_vm_exec_control & bit);
 }
 
+static inline bool nested_cpu_has_virtual_nmis(struct vmcs12 *vmcs12,
+	struct kvm_vcpu *vcpu)
+{
+	return vmcs12->pin_based_vm_exec_control & PIN_BASED_VIRTUAL_NMIS;
+}
+
+static inline bool is_exception(u32 intr_info)
+{
+	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
+		== (INTR_TYPE_HARD_EXCEPTION | INTR_INFO_VALID_MASK);
+}
+
+static void nested_vmx_vmexit(struct kvm_vcpu *vcpu);
 static void nested_vmx_entry_failure(struct kvm_vcpu *vcpu,
 			struct vmcs12 *vmcs12,
 			u32 reason, unsigned long qualification);
@@ -5276,6 +5291,229 @@ static int (*kvm_vmx_exit_handlers[])(st
 static const int kvm_vmx_max_exit_handlers =
 	ARRAY_SIZE(kvm_vmx_exit_handlers);
 
+/*
+ * Return 1 if we should exit from L2 to L1 to handle an MSR access access,
+ * rather than handle it ourselves in L0. I.e., check whether L1 expressed
+ * disinterest in the current event (read or write a specific MSR) by using an
+ * MSR bitmap. This may be the case even when L0 doesn't use MSR bitmaps.
+ */
+static bool nested_vmx_exit_handled_msr(struct kvm_vcpu *vcpu,
+	struct vmcs12 *vmcs12, u32 exit_reason)
+{
+	u32 msr_index = vcpu->arch.regs[VCPU_REGS_RCX];
+	gpa_t bitmap;
+
+	if (!nested_cpu_has(get_vmcs12(vcpu), CPU_BASED_USE_MSR_BITMAPS))
+		return 1;
+
+	/*
+	 * The MSR_BITMAP page is divided into four 1024-byte bitmaps,
+	 * for the four combinations of read/write and low/high MSR numbers.
+	 * First we need to figure out which of the four to use:
+	 */
+	bitmap = vmcs12->msr_bitmap;
+	if (exit_reason == EXIT_REASON_MSR_WRITE)
+		bitmap += 2048;
+	if (msr_index >= 0xc0000000) {
+		msr_index -= 0xc0000000;
+		bitmap += 1024;
+	}
+
+	/* Then read the msr_index'th bit from this bitmap: */
+	if (msr_index < 1024*8) {
+		unsigned char b;
+		kvm_read_guest(vcpu->kvm, bitmap + msr_index/8, &b, 1);
+		return 1 & (b >> (msr_index & 7));
+	} else
+		return 1; /* let L1 handle the wrong parameter */
+}
+
+/*
+ * Return 1 if we should exit from L2 to L1 to handle a CR access exit,
+ * rather than handle it ourselves in L0. I.e., check if L1 wanted to
+ * intercept (via guest_host_mask etc.) the current event.
+ */
+static bool nested_vmx_exit_handled_cr(struct kvm_vcpu *vcpu,
+	struct vmcs12 *vmcs12)
+{
+	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	int cr = exit_qualification & 15;
+	int reg = (exit_qualification >> 8) & 15;
+	unsigned long val = kvm_register_read(vcpu, reg);
+
+	switch ((exit_qualification >> 4) & 3) {
+	case 0: /* mov to cr */
+		switch (cr) {
+		case 0:
+			if (vmcs12->cr0_guest_host_mask &
+			    (val ^ vmcs12->cr0_read_shadow))
+				return 1;
+			break;
+		case 3:
+			if ((vmcs12->cr3_target_count >= 1 &&
+					vmcs12->cr3_target_value0 == val) ||
+				(vmcs12->cr3_target_count >= 2 &&
+					vmcs12->cr3_target_value1 == val) ||
+				(vmcs12->cr3_target_count >= 3 &&
+					vmcs12->cr3_target_value2 == val) ||
+				(vmcs12->cr3_target_count >= 4 &&
+					vmcs12->cr3_target_value3 == val))
+				return 0;
+			if (nested_cpu_has(vmcs12, CPU_BASED_CR3_LOAD_EXITING))
+				return 1;
+			break;
+		case 4:
+			if (vmcs12->cr4_guest_host_mask &
+			    (vmcs12->cr4_read_shadow ^ val))
+				return 1;
+			break;
+		case 8:
+			if (nested_cpu_has(vmcs12, CPU_BASED_CR8_LOAD_EXITING))
+				return 1;
+			break;
+		}
+		break;
+	case 2: /* clts */
+		if ((vmcs12->cr0_guest_host_mask & X86_CR0_TS) &&
+		    (vmcs12->cr0_read_shadow & X86_CR0_TS))
+			return 1;
+		break;
+	case 1: /* mov from cr */
+		switch (cr) {
+		case 3:
+			if (vmcs12->cpu_based_vm_exec_control &
+			    CPU_BASED_CR3_STORE_EXITING)
+				return 1;
+			break;
+		case 8:
+			if (vmcs12->cpu_based_vm_exec_control &
+			    CPU_BASED_CR8_STORE_EXITING)
+				return 1;
+			break;
+		}
+		break;
+	case 3: /* lmsw */
+		/*
+		 * lmsw can change bits 1..3 of cr0, and only set bit 0 of
+		 * cr0. Other attempted changes are ignored, with no exit.
+		 */
+		if (vmcs12->cr0_guest_host_mask & 0xe &
+		    (val ^ vmcs12->cr0_read_shadow))
+			return 1;
+		if ((vmcs12->cr0_guest_host_mask & 0x1) &&
+		    !(vmcs12->cr0_read_shadow & 0x1) &&
+		    (val & 0x1))
+			return 1;
+		break;
+	}
+	return 0;
+}
+
+/*
+ * Return 1 if we should exit from L2 to L1 to handle an exit, or 0 if we
+ * should handle it ourselves in L0 (and then continue L2). Only call this
+ * when in is_guest_mode (L2).
+ */
+static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
+{
+	u32 exit_reason = vmcs_read32(VM_EXIT_REASON);
+	u32 intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+
+	if (vmx->nested.nested_run_pending)
+		return 0;
+
+	if (unlikely(vmx->fail)) {
+		printk(KERN_INFO "%s failed vm entry %x\n",
+		       __func__, vmcs_read32(VM_INSTRUCTION_ERROR));
+		return 1;
+	}
+
+	switch (exit_reason) {
+	case EXIT_REASON_EXCEPTION_NMI:
+		if (!is_exception(intr_info))
+			return 0;
+		else if (is_page_fault(intr_info))
+			return enable_ept;
+		return vmcs12->exception_bitmap &
+				(1u << (intr_info & INTR_INFO_VECTOR_MASK));
+	case EXIT_REASON_EXTERNAL_INTERRUPT:
+		return 0;
+	case EXIT_REASON_TRIPLE_FAULT:
+		return 1;
+	case EXIT_REASON_PENDING_INTERRUPT:
+	case EXIT_REASON_NMI_WINDOW:
+		/*
+		 * prepare_vmcs02() set the CPU_BASED_VIRTUAL_INTR_PENDING bit
+		 * (aka Interrupt Window Exiting) only when L1 turned it on,
+		 * so if we got a PENDING_INTERRUPT exit, this must be for L1.
+		 * Same for NMI Window Exiting.
+		 */
+		return 1;
+	case EXIT_REASON_TASK_SWITCH:
+		return 1;
+	case EXIT_REASON_CPUID:
+		return 1;
+	case EXIT_REASON_HLT:
+		return nested_cpu_has(vmcs12, CPU_BASED_HLT_EXITING);
+	case EXIT_REASON_INVD:
+		return 1;
+	case EXIT_REASON_INVLPG:
+		return nested_cpu_has(vmcs12, CPU_BASED_INVLPG_EXITING);
+	case EXIT_REASON_RDPMC:
+		return nested_cpu_has(vmcs12, CPU_BASED_RDPMC_EXITING);
+	case EXIT_REASON_RDTSC:
+		return nested_cpu_has(vmcs12, CPU_BASED_RDTSC_EXITING);
+	case EXIT_REASON_VMCALL: case EXIT_REASON_VMCLEAR:
+	case EXIT_REASON_VMLAUNCH: case EXIT_REASON_VMPTRLD:
+	case EXIT_REASON_VMPTRST: case EXIT_REASON_VMREAD:
+	case EXIT_REASON_VMRESUME: case EXIT_REASON_VMWRITE:
+	case EXIT_REASON_VMOFF: case EXIT_REASON_VMON:
+		/*
+		 * VMX instructions trap unconditionally. This allows L1 to
+		 * emulate them for its L2 guest, i.e., allows 3-level nesting!
+		 */
+		return 1;
+	case EXIT_REASON_CR_ACCESS:
+		return nested_vmx_exit_handled_cr(vcpu, vmcs12);
+	case EXIT_REASON_DR_ACCESS:
+		return nested_cpu_has(vmcs12, CPU_BASED_MOV_DR_EXITING);
+	case EXIT_REASON_IO_INSTRUCTION:
+		/* TODO: support IO bitmaps */
+		return 1;
+	case EXIT_REASON_MSR_READ:
+	case EXIT_REASON_MSR_WRITE:
+		return nested_vmx_exit_handled_msr(vcpu, vmcs12, exit_reason);
+	case EXIT_REASON_INVALID_STATE:
+		return 1;
+	case EXIT_REASON_MWAIT_INSTRUCTION:
+		return nested_cpu_has(vmcs12, CPU_BASED_MWAIT_EXITING);
+	case EXIT_REASON_MONITOR_INSTRUCTION:
+		return nested_cpu_has(vmcs12, CPU_BASED_MONITOR_EXITING);
+	case EXIT_REASON_PAUSE_INSTRUCTION:
+		return nested_cpu_has(vmcs12, CPU_BASED_PAUSE_EXITING) ||
+			nested_cpu_has2(vmcs12,
+				SECONDARY_EXEC_PAUSE_LOOP_EXITING);
+	case EXIT_REASON_MCE_DURING_VMENTRY:
+		return 0;
+	case EXIT_REASON_TPR_BELOW_THRESHOLD:
+		return 1;
+	case EXIT_REASON_APIC_ACCESS:
+		return nested_cpu_has2(vmcs12,
+			SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES);
+	case EXIT_REASON_EPT_VIOLATION:
+	case EXIT_REASON_EPT_MISCONFIG:
+		return 0;
+	case EXIT_REASON_WBINVD:
+		return nested_cpu_has2(vmcs12, SECONDARY_EXEC_WBINVD_EXITING);
+	case EXIT_REASON_XSETBV:
+		return 1;
+	default:
+		return 1;
+	}
+}
+
 static void vmx_get_exit_info(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2)
 {
 	*info1 = vmcs_readl(EXIT_QUALIFICATION);
@@ -5298,6 +5536,17 @@ static int vmx_handle_exit(struct kvm_vc
 	if (vmx->emulation_required && emulate_invalid_guest_state)
 		return handle_invalid_guest_state(vcpu);
 
+	if (exit_reason == EXIT_REASON_VMLAUNCH ||
+	    exit_reason == EXIT_REASON_VMRESUME)
+		vmx->nested.nested_run_pending = 1;
+	else
+		vmx->nested.nested_run_pending = 0;
+
+	if (is_guest_mode(vcpu) && nested_vmx_exit_handled(vcpu)) {
+		nested_vmx_vmexit(vcpu);
+		return 1;
+	}
+
 	if (exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY) {
 		vcpu->run->exit_reason = KVM_EXIT_FAIL_ENTRY;
 		vcpu->run->fail_entry.hardware_entry_failure_reason
@@ -5320,7 +5569,9 @@ static int vmx_handle_exit(struct kvm_vc
 		       "(0x%x) and exit reason is 0x%x\n",
 		       __func__, vectoring_info, exit_reason);
 
-	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked)) {
+	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked &&
+	    !(is_guest_mode(vcpu) && nested_cpu_has_virtual_nmis(
+	                                get_vmcs12(vcpu), vcpu)))) {
 		if (vmx_interrupt_allowed(vcpu)) {
 			vmx->soft_vnmi_blocked = 0;
 		} else if (vmx->vnmi_blocked_time > 1000000000LL &&

[PATCH 23/31] nVMX: Correct handling of interrupt injection

[Nadav Har'El]

The code in this patch correctly emulates external-interrupt injection
while a nested guest L2 is running.

Because of this code's relative un-obviousness, I include here a longer-than-
usual justification for what it does - much longer than the code itself ;-)

To understand how to correctly emulate interrupt injection while L2 is
running, let's look first at what we need to emulate: How would things look
like if the extra L0 hypervisor layer is removed, and instead of L0 injecting
an interrupt, we had hardware delivering an interrupt?

Now we have L1 running on bare metal with a guest L2, and the hardware
generates an interrupt. Assuming that L1 set PIN_BASED_EXT_INTR_MASK to 1, and 
VM_EXIT_ACK_INTR_ON_EXIT to 0 (we'll revisit these assumptions below), what
happens now is this: The processor exits from L2 to L1, with an external-
interrupt exit reason but without an interrupt vector. L1 runs, with
interrupts disabled, and it doesn't yet know what the interrupt was. Soon
after, it enables interrupts and only at that moment, it gets the interrupt
from the processor. when L1 is KVM, Linux handles this interrupt.

Now we need exactly the same thing to happen when that L1->L2 system runs
on top of L0, instead of real hardware. This is how we do this:

When L0 wants to inject an interrupt, it needs to exit from L2 to L1, with
external-interrupt exit reason (with an invalid interrupt vector), and run L1.
Just like in the bare metal case, it likely can't deliver the interrupt to
L1 now because L1 is running with interrupts disabled, in which case it turns
on the interrupt window when running L1 after the exit. L1 will soon enable
interrupts, and at that point L0 will gain control again and inject the
interrupt to L1.

Finally, there is an extra complication in the code: when nested_run_pending,
we cannot return to L1 now, and must launch L2. We need to remember the
interrupt we wanted to inject (and not clear it now), and do it on the
next exit.

The above explanation shows that the relative strangeness of the nested
interrupt injection code in this patch, and the extra interrupt-window
exit incurred, are in fact necessary for accurate emulation, and are not
just an unoptimized implementation.

Let's revisit now the two assumptions made above:

If L1 turns off PIN_BASED_EXT_INTR_MASK (no hypervisor that I know
does, by the way), things are simple: L0 may inject the interrupt directly
to the L2 guest - using the normal code path that injects to any guest.
We support this case in the code below.

If L1 turns on VM_EXIT_ACK_INTR_ON_EXIT, things look very different from the
description above: L1 expects to see an exit from L2 with the interrupt vector
already filled in the exit information, and does not expect to be interrupted
again with this interrupt. The current code does not (yet) support this case,
so we do not allow the VM_EXIT_ACK_INTR_ON_EXIT exit-control to be turned on
by L1.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:09.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:09.000000000 +0300
@@ -1790,6 +1790,7 @@ static __init void nested_vmx_setup_ctls
 
 	/* exit controls */
 	nested_vmx_exit_ctls_low = 0;
+	/* Note that guest use of VM_EXIT_ACK_INTR_ON_EXIT is not supported. */
 #ifdef CONFIG_X86_64
 	nested_vmx_exit_ctls_high = VM_EXIT_HOST_ADDR_SPACE_SIZE;
 #else
@@ -3743,9 +3744,25 @@ out:
 	return ret;
 }
 
+/*
+ * In nested virtualization, check if L1 asked to exit on external interrupts.
+ * For most existing hypervisors, this will always return true.
+ */
+static bool nested_exit_on_intr(struct kvm_vcpu *vcpu)
+{
+	return get_vmcs12(vcpu)->pin_based_vm_exec_control &
+		PIN_BASED_EXT_INTR_MASK;
+}
+
 static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
 	u32 cpu_based_vm_exec_control;
+	if (is_guest_mode(vcpu) && nested_exit_on_intr(vcpu))
+		/* We can get here when nested_run_pending caused
+		 * vmx_interrupt_allowed() to return false. In this case, do
+		 * nothing - the interrupt will be injected later.
+		 */
+		return;
 
 	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
 	cpu_based_vm_exec_control |= CPU_BASED_VIRTUAL_INTR_PENDING;
@@ -3868,6 +3885,17 @@ static void vmx_set_nmi_mask(struct kvm_
 
 static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
+	if (is_guest_mode(vcpu) && nested_exit_on_intr(vcpu)) {
+		struct vmcs12 *vmcs12;
+		if (to_vmx(vcpu)->nested.nested_run_pending)
+			return 0;
+		nested_vmx_vmexit(vcpu);
+		vmcs12 = get_vmcs12(vcpu);
+		vmcs12->vm_exit_reason = EXIT_REASON_EXTERNAL_INTERRUPT;
+		vmcs12->vm_exit_intr_info = 0;
+		/* fall through to normal code, but now in L1, not L2 */
+	}
+
 	return (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
 		!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
 			(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS));
@@ -5536,6 +5564,14 @@ static int vmx_handle_exit(struct kvm_vc
 	if (vmx->emulation_required && emulate_invalid_guest_state)
 		return handle_invalid_guest_state(vcpu);
 
+	/*
+	 * the KVM_REQ_EVENT optimization bit is only on for one entry, and if
+	 * we did not inject a still-pending event to L1 now because of
+	 * nested_run_pending, we need to re-enable this bit.
+	 */
+	if (vmx->nested.nested_run_pending)
+		kvm_make_request(KVM_REQ_EVENT, vcpu);
+
 	if (exit_reason == EXIT_REASON_VMLAUNCH ||
 	    exit_reason == EXIT_REASON_VMRESUME)
 		vmx->nested.nested_run_pending = 1;

[PATCH 24/31] nVMX: Correct handling of exception injection

[Nadav Har'El]

Similar to the previous patch, but concerning injection of exceptions rather
than external interrupts.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:09.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:09.000000000 +0300
@@ -1585,6 +1585,25 @@ static void vmx_clear_hlt(struct kvm_vcp
 		vmcs_write32(GUEST_ACTIVITY_STATE, GUEST_ACTIVITY_ACTIVE);
 }
 
+/*
+ * KVM wants to inject page-faults which it got to the guest. This function
+ * checks whether in a nested guest, we need to inject them to L1 or L2.
+ * This function assumes it is called with the exit reason in vmcs02 being
+ * a #PF exception (this is the only case in which KVM injects a #PF when L2
+ * is running).
+ */
+static int nested_pf_handled(struct kvm_vcpu *vcpu)
+{
+	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+
+	/* TODO: also check PFEC_MATCH/MASK, not just EB.PF. */
+	if (!(vmcs12->exception_bitmap & PF_VECTOR))
+		return 0;
+
+	nested_vmx_vmexit(vcpu);
+	return 1;
+}
+
 static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 				bool has_error_code, u32 error_code,
 				bool reinject)
@@ -1592,6 +1611,10 @@ static void vmx_queue_exception(struct k
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 intr_info = nr | INTR_INFO_VALID_MASK;
 
+	if (nr == PF_VECTOR && is_guest_mode(vcpu) &&
+		nested_pf_handled(vcpu))
+		return;
+
 	if (has_error_code) {
 		vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, error_code);
 		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
@@ -3819,6 +3842,9 @@ static void vmx_inject_nmi(struct kvm_vc
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (is_guest_mode(vcpu))
+		return;
+
 	if (!cpu_has_virtual_nmis()) {
 		/*
 		 * Tracking the NMI-blocked state in software is built upon

[PATCH 25/31] nVMX: Correct handling of idt vectoring info

[Nadav Har'El]

This patch adds correct handling of IDT_VECTORING_INFO_FIELD for the nested
case.

When a guest exits while delivering an interrupt or exception, we get this
information in IDT_VECTORING_INFO_FIELD in the VMCS. When L2 exits to L1,
there's nothing we need to do, because L1 will see this field in vmcs12, and
handle it itself. However, when L2 exits and L0 handles the exit itself and
plans to return to L2, L0 must inject this event to L2.

In the normal non-nested case, the idt_vectoring_info case is discovered after
the exit, and the decision to inject (though not the injection itself) is made
at that point. However, in the nested case a decision of whether to return
to L2 or L1 also happens during the injection phase (see the previous
patches), so in the nested case we can only decide what to do about the
idt_vectoring_info right after the injection, i.e., in the beginning of
vmx_vcpu_run, which is the first time we know for sure if we're staying in
L2.

Therefore, when we exit L2 (is_guest_mode(vcpu)), we disable the regular
vmx_complete_interrupts() code which queues the idt_vectoring_info for
injection on next entry - because such injection would not be appropriate
if we will decide to exit to L1. Rather, we just save the idt_vectoring_info
and related fields in vmcs12 (which is a convenient place to save these
fields). On the next entry in vmx_vcpu_run (*after* the injection phase,
potentially exiting to L1 to inject an event requested by user space), if
we find ourselves in L1 we don't need to do anything with those values
we saved (as explained above). But if we find that we're in L2, or rather
*still* at L2 (it's not nested_run_pending, meaning that this is the first
round of L2 running after L1 having just launched it), we need to inject
the event saved in those fields - by writing the appropriate VMCS fields.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:10.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:10.000000000 +0300
@@ -5796,6 +5796,8 @@ static void __vmx_complete_interrupts(st
 
 static void vmx_complete_interrupts(struct vcpu_vmx *vmx)
 {
+	if (is_guest_mode(&vmx->vcpu))
+		return;
 	__vmx_complete_interrupts(vmx, vmx->idt_vectoring_info,
 				  VM_EXIT_INSTRUCTION_LEN,
 				  IDT_VECTORING_ERROR_CODE);
@@ -5803,6 +5805,8 @@ static void vmx_complete_interrupts(stru
 
 static void vmx_cancel_injection(struct kvm_vcpu *vcpu)
 {
+	if (is_guest_mode(vcpu))
+		return;
 	__vmx_complete_interrupts(to_vmx(vcpu),
 				  vmcs_read32(VM_ENTRY_INTR_INFO_FIELD),
 				  VM_ENTRY_INSTRUCTION_LEN,
@@ -5823,6 +5827,21 @@ static void __noclone vmx_vcpu_run(struc
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (is_guest_mode(vcpu) && !vmx->nested.nested_run_pending) {
+		struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+		if (vmcs12->idt_vectoring_info_field &
+				VECTORING_INFO_VALID_MASK) {
+			vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+				vmcs12->idt_vectoring_info_field);
+			vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
+				vmcs12->vm_exit_instruction_len);
+			if (vmcs12->idt_vectoring_info_field &
+					VECTORING_INFO_DELIVER_CODE_MASK)
+				vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE,
+					vmcs12->idt_vectoring_error_code);
+		}
+	}
+
 	/* Record the guest's net vcpu time for enforced NMI injections. */
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
 		vmx->entry_time = ktime_get();
@@ -5955,6 +5974,17 @@ static void __noclone vmx_vcpu_run(struc
 
 	vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
 
+	if (is_guest_mode(vcpu)) {
+		struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+		vmcs12->idt_vectoring_info_field = vmx->idt_vectoring_info;
+		if (vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK) {
+			vmcs12->idt_vectoring_error_code =
+				vmcs_read32(IDT_VECTORING_ERROR_CODE);
+			vmcs12->vm_exit_instruction_len =
+				vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
+		}
+	}
+
 	asm("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
 	vmx->loaded_vmcs->launched = 1;
 

[PATCH 26/31] nVMX: Handling of CR0 and CR4 modifying instructions

[Nadav Har'El]

When L2 tries to modify CR0 or CR4 (with mov or clts), and modifies a bit
which L1 asked to shadow (via CR[04]_GUEST_HOST_MASK), we already do the right
thing: we let L1 handle the trap (see nested_vmx_exit_handled_cr() in a
previous patch).
When L2 modifies bits that L1 doesn't care about, we let it think (via
CR[04]_READ_SHADOW) that it did these modifications, while only changing
(in GUEST_CR[04]) the bits that L0 doesn't shadow.

This is needed for corect handling of CR0.TS for lazy FPU loading: L0 may
want to leave TS on, while pretending to allow the guest to change it.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   58 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 55 insertions(+), 3 deletions(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:11.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:11.000000000 +0300
@@ -4163,6 +4163,58 @@ vmx_patch_hypercall(struct kvm_vcpu *vcp
 	hypercall[2] = 0xc1;
 }
 
+/* called to set cr0 as approriate for a mov-to-cr0 exit. */
+static int handle_set_cr0(struct kvm_vcpu *vcpu, unsigned long val)
+{
+	if (to_vmx(vcpu)->nested.vmxon &&
+	    ((val & VMXON_CR0_ALWAYSON) != VMXON_CR0_ALWAYSON))
+		return 1;
+
+	if (is_guest_mode(vcpu)) {
+		/*
+		 * We get here when L2 changed cr0 in a way that did not change
+		 * any of L1's shadowed bits (see nested_vmx_exit_handled_cr),
+		 * but did change L0 shadowed bits. This can currently happen
+		 * with the TS bit: L0 may want to leave TS on (for lazy fpu
+		 * loading) while pretending to allow the guest to change it.
+		 */
+		if (kvm_set_cr0(vcpu, (val & vcpu->arch.cr0_guest_owned_bits) |
+			 (vcpu->arch.cr0 & ~vcpu->arch.cr0_guest_owned_bits)))
+			return 1;
+		vmcs_writel(CR0_READ_SHADOW, val);
+		return 0;
+	} else
+		return kvm_set_cr0(vcpu, val);
+}
+
+static int handle_set_cr4(struct kvm_vcpu *vcpu, unsigned long val)
+{
+	if (is_guest_mode(vcpu)) {
+		if (kvm_set_cr4(vcpu, (val & vcpu->arch.cr4_guest_owned_bits) |
+			 (vcpu->arch.cr4 & ~vcpu->arch.cr4_guest_owned_bits)))
+			return 1;
+		vmcs_writel(CR4_READ_SHADOW, val);
+		return 0;
+	} else
+		return kvm_set_cr4(vcpu, val);
+}
+
+/* called to set cr0 as approriate for clts instruction exit. */
+static void handle_clts(struct kvm_vcpu *vcpu)
+{
+	if (is_guest_mode(vcpu)) {
+		/*
+		 * We get here when L2 did CLTS, and L1 didn't shadow CR0.TS
+		 * but we did (!fpu_active). We need to keep GUEST_CR0.TS on,
+		 * just pretend it's off (also in arch.cr0 for fpu_activate).
+		 */
+		vmcs_writel(CR0_READ_SHADOW,
+			vmcs_readl(CR0_READ_SHADOW) & ~X86_CR0_TS);
+		vcpu->arch.cr0 &= ~X86_CR0_TS;
+	} else
+		vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
+}
+
 static int handle_cr(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification, val;
@@ -4179,7 +4231,7 @@ static int handle_cr(struct kvm_vcpu *vc
 		trace_kvm_cr_write(cr, val);
 		switch (cr) {
 		case 0:
-			err = kvm_set_cr0(vcpu, val);
+			err = handle_set_cr0(vcpu, val);
 			kvm_complete_insn_gp(vcpu, err);
 			return 1;
 		case 3:
@@ -4187,7 +4239,7 @@ static int handle_cr(struct kvm_vcpu *vc
 			kvm_complete_insn_gp(vcpu, err);
 			return 1;
 		case 4:
-			err = kvm_set_cr4(vcpu, val);
+			err = handle_set_cr4(vcpu, val);
 			kvm_complete_insn_gp(vcpu, err);
 			return 1;
 		case 8: {
@@ -4205,7 +4257,7 @@ static int handle_cr(struct kvm_vcpu *vc
 		};
 		break;
 	case 2: /* clts */
-		vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
+		handle_clts(vcpu);
 		trace_kvm_cr_write(0, kvm_read_cr0(vcpu));
 		skip_emulated_instruction(vcpu);
 		vmx_fpu_activate(vcpu);

[PATCH 27/31] nVMX: Further fixes for lazy FPU loading

[Nadav Har'El]

KVM's "Lazy FPU loading" means that sometimes L0 needs to set CR0.TS, even
if a guest didn't set it. Moreover, L0 must also trap CR0.TS changes and
NM exceptions, even if we have a guest hypervisor (L1) who didn't want these
traps. And of course, conversely: If L1 wanted to trap these events, we
must let it, even if L0 is not interested in them.

This patch fixes some existing KVM code (in update_exception_bitmap(),
vmx_fpu_activate(), vmx_fpu_deactivate()) to do the correct merging of L0's
and L1's needs. Note that handle_cr() was already fixed in the above patch,
and that new code in introduced in previous patches already handles CR0
correctly (see prepare_vmcs02(), prepare_vmcs12(), and nested_vmx_vmexit()).

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:11.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:11.000000000 +0300
@@ -1179,6 +1179,15 @@ static void update_exception_bitmap(stru
 		eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
 	if (vcpu->fpu_active)
 		eb &= ~(1u << NM_VECTOR);
+
+	/* When we are running a nested L2 guest and L1 specified for it a
+	 * certain exception bitmap, we must trap the same exceptions and pass
+	 * them to L1. When running L2, we will only handle the exceptions
+	 * specified above if L1 did not want them.
+	 */
+	if (is_guest_mode(vcpu))
+		eb |= get_vmcs12(vcpu)->exception_bitmap;
+
 	vmcs_write32(EXCEPTION_BITMAP, eb);
 }
 
@@ -1473,6 +1482,9 @@ static void vmx_fpu_activate(struct kvm_
 	vmcs_writel(GUEST_CR0, cr0);
 	update_exception_bitmap(vcpu);
 	vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS;
+	if (is_guest_mode(vcpu))
+		vcpu->arch.cr0_guest_owned_bits &=
+			~get_vmcs12(vcpu)->cr0_guest_host_mask;
 	vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
 }
 
@@ -1496,12 +1508,29 @@ static inline unsigned long nested_read_
 
 static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
 {
+	/* Note that there is no vcpu->fpu_active = 0 here. The caller must
+	 * set this *before* calling this function.
+	 */
 	vmx_decache_cr0_guest_bits(vcpu);
 	vmcs_set_bits(GUEST_CR0, X86_CR0_TS | X86_CR0_MP);
 	update_exception_bitmap(vcpu);
 	vcpu->arch.cr0_guest_owned_bits = 0;
 	vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
-	vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
+	if (is_guest_mode(vcpu)) {
+		/*
+		 * L1's specified read shadow might not contain the TS bit,
+		 * so now that we turned on shadowing of this bit, we need to
+		 * set this bit of the shadow. Like in nested_vmx_run we need
+		 * nested_read_cr0(vmcs12), but vmcs12->guest_cr0 is not yet
+		 * up-to-date here because we just decached cr0.TS (and we'll
+		 * only update vmcs12->guest_cr0 on nested exit).
+		 */
+		struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+		vmcs12->guest_cr0 = (vmcs12->guest_cr0 & ~X86_CR0_TS) |
+			(vcpu->arch.cr0 & X86_CR0_TS);
+		vmcs_writel(CR0_READ_SHADOW, nested_read_cr0(vmcs12));
+	} else
+		vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
 }
 
 static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)

[PATCH 28/31] nVMX: Additional TSC-offset handling

[Nadav Har'El]

In the unlikely case that L1 does not capture MSR_IA32_TSC, L0 needs to
emulate this MSR write by L2 by modifying vmcs02.tsc_offset. We also need to
set vmcs12.tsc_offset, for this change to survive the next nested entry (see
prepare_vmcs02()).
Additionally, we also need to modify vmx_adjust_tsc_offset: The semantics
of this function is that the TSC of all guests on this vcpu, L1 and possibly
several L2s, need to be adjusted. To do this, we need to adjust vmcs01's
tsc_offset (this offset will also apply to each L2s we enter). We can't set
vmcs01 now, so we have to remember this adjustment and apply it when we
later exit to L1.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:13.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:13.000000000 +0300
@@ -1766,12 +1766,24 @@ static void vmx_set_tsc_khz(struct kvm_v
 static void vmx_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
 {
 	vmcs_write64(TSC_OFFSET, offset);
+	if (is_guest_mode(vcpu))
+		/*
+		 * We're here if L1 chose not to trap the TSC MSR. Since
+		 * prepare_vmcs12() does not copy tsc_offset, we need to also
+		 * set the vmcs12 field here.
+		 */
+		get_vmcs12(vcpu)->tsc_offset = offset -
+			to_vmx(vcpu)->nested.vmcs01_tsc_offset;
 }
 
 static void vmx_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment)
 {
 	u64 offset = vmcs_read64(TSC_OFFSET);
 	vmcs_write64(TSC_OFFSET, offset + adjustment);
+	if (is_guest_mode(vcpu)) {
+		/* Even when running L2, the adjustment needs to apply to L1 */
+		to_vmx(vcpu)->nested.vmcs01_tsc_offset += adjustment;
+	}
 }
 
 static u64 vmx_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc)

[PATCH 29/31] nVMX: Add VMX to list of supported cpuid features

[Nadav Har'El]

If the "nested" module option is enabled, add the "VMX" CPU feature to the
list of CPU features KVM advertises with the KVM_GET_SUPPORTED_CPUID ioctl.

Qemu uses this ioctl, and intersects KVM's list with its own list of desired
cpu features (depending on the -cpu option given to qemu) to determine the
final list of features presented to the guest.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |    2 ++
 1 file changed, 2 insertions(+)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:14.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:14.000000000 +0300
@@ -6298,6 +6298,8 @@ static void vmx_cpuid_update(struct kvm_
 
 static void vmx_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
 {
+	if (func == 1 && nested)
+		entry->ecx |= bit(X86_FEATURE_VMX);
 }
 
 /*

[PATCH 30/31] nVMX: Miscellenous small corrections

[Nadav Har'El]

Small corrections of KVM (spelling, etc.) not directly related to nested VMX.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 arch/x86/kvm/vmx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- .before/arch/x86/kvm/vmx.c	2011-05-25 22:41:14.000000000 +0300
+++ .after/arch/x86/kvm/vmx.c	2011-05-25 22:41:14.000000000 +0300
@@ -959,7 +959,7 @@ static void vmcs_load(struct vmcs *vmcs)
 			: "=qm"(error) : "a"(&phys_addr), "m"(phys_addr)
 			: "cc", "memory");
 	if (error)
-		printk(KERN_ERR "kvm: vmptrld %p/%llx fail\n",
+		printk(KERN_ERR "kvm: vmptrld %p/%llx failed\n",
 		       vmcs, phys_addr);
 }
 

[PATCH 31/31] nVMX: Documentation

[Nadav Har'El]

This patch includes a brief introduction to the nested vmx feature in the
Documentation/kvm directory. The document also includes a copy of the
vmcs12 structure, as requested by Avi Kivity.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
---
 Documentation/kvm/nested-vmx.txt |  251 +++++++++++++++++++++++++++++
 1 file changed, 251 insertions(+)

--- .before/Documentation/kvm/nested-vmx.txt	2011-05-25 22:41:16.000000000 +0300
+++ .after/Documentation/kvm/nested-vmx.txt	2011-05-25 22:41:16.000000000 +0300
@@ -0,0 +1,251 @@
+Nested VMX
+==========
+
+Overview
+---------
+
+On Intel processors, KVM uses Intel's VMX (Virtual-Machine eXtensions)
+to easily and efficiently run guest operating systems. Normally, these guests
+*cannot* themselves be hypervisors running their own guests, because in VMX,
+guests cannot use VMX instructions.
+
+The "Nested VMX" feature adds this missing capability - of running guest
+hypervisors (which use VMX) with their own nested guests. It does so by
+allowing a guest to use VMX instructions, and correctly and efficiently
+emulating them using the single level of VMX available in the hardware.
+
+We describe in much greater detail the theory behind the nested VMX feature,
+its implementation and its performance characteristics, in the OSDI 2010 paper
+"The Turtles Project: Design and Implementation of Nested Virtualization",
+available at:
+
+	http://www.usenix.org/events/osdi10/tech/full_papers/Ben-Yehuda.pdf
+
+
+Terminology
+-----------
+
+Single-level virtualization has two levels - the host (KVM) and the guests.
+In nested virtualization, we have three levels: The host (KVM), which we call
+L0, the guest hypervisor, which we call L1, and its nested guest, which we
+call L2.
+
+
+Known limitations
+-----------------
+
+The current code supports running Linux guests under KVM guests.
+Only 64-bit guest hypervisors are supported.
+
+Additional patches for running Windows under guest KVM, and Linux under
+guest VMware server, and support for nested EPT, are currently running in
+the lab, and will be sent as follow-on patchsets.
+
+
+Running nested VMX
+------------------
+
+The nested VMX feature is disabled by default. It can be enabled by giving
+the "nested=1" option to the kvm-intel module.
+
+No modifications are required to user space (qemu). However, qemu's default
+emulated CPU type (qemu64) does not list the "VMX" CPU feature, so it must be
+explicitly enabled, by giving qemu one of the following options:
+
+     -cpu host              (emulated CPU has all features of the real CPU)
+
+     -cpu qemu64,+vmx       (add just the vmx feature to a named CPU type)
+
+
+ABIs
+----
+
+Nested VMX aims to present a standard and (eventually) fully-functional VMX
+implementation for the a guest hypervisor to use. As such, the official
+specification of the ABI that it provides is Intel's VMX specification,
+namely volume 3B of their "Intel 64 and IA-32 Architectures Software
+Developer's Manual". Not all of VMX's features are currently fully supported,
+but the goal is to eventually support them all, starting with the VMX features
+which are used in practice by popular hypervisors (KVM and others).
+
+As a VMX implementation, nested VMX presents a VMCS structure to L1.
+As mandated by the spec, other than the two fields revision_id and abort,
+this structure is *opaque* to its user, who is not supposed to know or care
+about its internal structure. Rather, the structure is accessed through the
+VMREAD and VMWRITE instructions.
+Still, for debugging purposes, KVM developers might be interested to know the
+internals of this structure; This is struct vmcs12 from arch/x86/kvm/vmx.c.
+
+The name "vmcs12" refers to the VMCS that L1 builds for L2. In the code we
+also have "vmcs01", the VMCS that L0 built for L1, and "vmcs02" is the VMCS
+which L0 builds to actually run L2 - how this is done is explained in the
+aforementioned paper.
+
+For convenience, we repeat the content of struct vmcs12 here. If the internals
+of this structure changes, this can break live migration across KVM versions.
+VMCS12_REVISION (from vmx.c) should be changed if struct vmcs12 or its inner
+struct shadow_vmcs is ever changed.
+
+	typedef u64 natural_width;
+	struct __packed vmcs12 {
+		/* According to the Intel spec, a VMCS region must start with
+		 * these two user-visible fields */
+		u32 revision_id;
+		u32 abort;
+
+		u32 launch_state; /* set to 0 by VMCLEAR, to 1 by VMLAUNCH */
+		u32 padding[7]; /* room for future expansion */
+
+		u64 io_bitmap_a;
+		u64 io_bitmap_b;
+		u64 msr_bitmap;
+		u64 vm_exit_msr_store_addr;
+		u64 vm_exit_msr_load_addr;
+		u64 vm_entry_msr_load_addr;
+		u64 tsc_offset;
+		u64 virtual_apic_page_addr;
+		u64 apic_access_addr;
+		u64 ept_pointer;
+		u64 guest_physical_address;
+		u64 vmcs_link_pointer;
+		u64 guest_ia32_debugctl;
+		u64 guest_ia32_pat;
+		u64 guest_ia32_efer;
+		u64 guest_pdptr0;
+		u64 guest_pdptr1;
+		u64 guest_pdptr2;
+		u64 guest_pdptr3;
+		u64 host_ia32_pat;
+		u64 host_ia32_efer;
+		u64 padding64[8]; /* room for future expansion */
+		natural_width cr0_guest_host_mask;
+		natural_width cr4_guest_host_mask;
+		natural_width cr0_read_shadow;
+		natural_width cr4_read_shadow;
+		natural_width cr3_target_value0;
+		natural_width cr3_target_value1;
+		natural_width cr3_target_value2;
+		natural_width cr3_target_value3;
+		natural_width exit_qualification;
+		natural_width guest_linear_address;
+		natural_width guest_cr0;
+		natural_width guest_cr3;
+		natural_width guest_cr4;
+		natural_width guest_es_base;
+		natural_width guest_cs_base;
+		natural_width guest_ss_base;
+		natural_width guest_ds_base;
+		natural_width guest_fs_base;
+		natural_width guest_gs_base;
+		natural_width guest_ldtr_base;
+		natural_width guest_tr_base;
+		natural_width guest_gdtr_base;
+		natural_width guest_idtr_base;
+		natural_width guest_dr7;
+		natural_width guest_rsp;
+		natural_width guest_rip;
+		natural_width guest_rflags;
+		natural_width guest_pending_dbg_exceptions;
+		natural_width guest_sysenter_esp;
+		natural_width guest_sysenter_eip;
+		natural_width host_cr0;
+		natural_width host_cr3;
+		natural_width host_cr4;
+		natural_width host_fs_base;
+		natural_width host_gs_base;
+		natural_width host_tr_base;
+		natural_width host_gdtr_base;
+		natural_width host_idtr_base;
+		natural_width host_ia32_sysenter_esp;
+		natural_width host_ia32_sysenter_eip;
+		natural_width host_rsp;
+		natural_width host_rip;
+		natural_width paddingl[8]; /* room for future expansion */
+		u32 pin_based_vm_exec_control;
+		u32 cpu_based_vm_exec_control;
+		u32 exception_bitmap;
+		u32 page_fault_error_code_mask;
+		u32 page_fault_error_code_match;
+		u32 cr3_target_count;
+		u32 vm_exit_controls;
+		u32 vm_exit_msr_store_count;
+		u32 vm_exit_msr_load_count;
+		u32 vm_entry_controls;
+		u32 vm_entry_msr_load_count;
+		u32 vm_entry_intr_info_field;
+		u32 vm_entry_exception_error_code;
+		u32 vm_entry_instruction_len;
+		u32 tpr_threshold;
+		u32 secondary_vm_exec_control;
+		u32 vm_instruction_error;
+		u32 vm_exit_reason;
+		u32 vm_exit_intr_info;
+		u32 vm_exit_intr_error_code;
+		u32 idt_vectoring_info_field;
+		u32 idt_vectoring_error_code;
+		u32 vm_exit_instruction_len;
+		u32 vmx_instruction_info;
+		u32 guest_es_limit;
+		u32 guest_cs_limit;
+		u32 guest_ss_limit;
+		u32 guest_ds_limit;
+		u32 guest_fs_limit;
+		u32 guest_gs_limit;
+		u32 guest_ldtr_limit;
+		u32 guest_tr_limit;
+		u32 guest_gdtr_limit;
+		u32 guest_idtr_limit;
+		u32 guest_es_ar_bytes;
+		u32 guest_cs_ar_bytes;
+		u32 guest_ss_ar_bytes;
+		u32 guest_ds_ar_bytes;
+		u32 guest_fs_ar_bytes;
+		u32 guest_gs_ar_bytes;
+		u32 guest_ldtr_ar_bytes;
+		u32 guest_tr_ar_bytes;
+		u32 guest_interruptibility_info;
+		u32 guest_activity_state;
+		u32 guest_sysenter_cs;
+		u32 host_ia32_sysenter_cs;
+		u32 padding32[8]; /* room for future expansion */
+		u16 virtual_processor_id;
+		u16 guest_es_selector;
+		u16 guest_cs_selector;
+		u16 guest_ss_selector;
+		u16 guest_ds_selector;
+		u16 guest_fs_selector;
+		u16 guest_gs_selector;
+		u16 guest_ldtr_selector;
+		u16 guest_tr_selector;
+		u16 host_es_selector;
+		u16 host_cs_selector;
+		u16 host_ss_selector;
+		u16 host_ds_selector;
+		u16 host_fs_selector;
+		u16 host_gs_selector;
+		u16 host_tr_selector;
+	};
+
+
+Authors
+-------
+
+These patches were written by:
+     Abel Gordon, abelg <at> il.ibm.com
+     Nadav Har'El, nyh <at> il.ibm.com
+     Orit Wasserman, oritw <at> il.ibm.com
+     Ben-Ami Yassor, benami <at> il.ibm.com
+     Muli Ben-Yehuda, muli <at> il.ibm.com
+
+With contributions by:
+     Anthony Liguori, aliguori <at> us.ibm.com
+     Mike Day, mdday <at> us.ibm.com
+     Michael Factor, factor <at> il.ibm.com
+     Zvi Dubitzky, dubi <at> il.ibm.com
+
+And valuable reviews by:
+     Avi Kivity, avi <at> redhat.com
+     Gleb Natapov, gleb <at> redhat.com
+     Marcelo Tosatti, mtosatti <at> redhat.com
+     Kevin Tian, kevin.tian <at> intel.com
+     and others.

RE: [PATCH 0/31] nVMX: Nested VMX, v11

[Tian, Kevin]

> From: Nadav Har'El
> Sent: Thursday, May 26, 2011 4:01 AM
> 
> Hi,
> 
> This is the eleventh iteration of the nested VMX patch set, and hopefully the
> last in this format.
> 
> Improvements in this version over the previous one include:
> 
>  * Overhauled vmcs, cpu, and launched handling (new loaded_vmcs structure
> and
>    per-cpu linked-list replacing old vcpu linked-list).
> 
>  * Added missing checks that VMPTRLD was done, in emulating VMLAUNCH
> and some
>    other VMX instructions.
> 
>  * prepare_vmcs02 is now void, and cannot fail. Correctly handle the case
>    of apic-access page with an invalid GPA.
> 
>  * A bunch of corrections to errors and omissions discovered by Kevin Tian.
> 
>  * Miscellenous function name changes, and other cosmetic improvements.
> 
> This new set of patches applies to the current KVM trunk (I checked with
> 5b186b275c0288c8576d26baebe9019875d68a2b).
> 
> Avi, please apply.

This version looks good to me, except that please make sure unhandled comments
are recorded in your private bugzilla and finally filled into a public place. :-)

Acked-by: Kevin Tian <kevin.tian@intel.com>

Thanks
Kevin

> 
> Nadav.
> 
> 
> About nested VMX:
> -----------------
> 
> The following 31 patches implement nested VMX support. This feature enables
> a guest to use the VMX APIs in order to run its own nested guests.
> In other words, it allows running hypervisors (that use VMX) under KVM.
> Multiple guest hypervisors can be run concurrently, and each of those can
> in turn host multiple guests.
> 
> The theory behind this work, our implementation, and its performance
> characteristics were presented in OSDI 2010 (the USENIX Symposium on
> Operating Systems Design and Implementation). Our paper was titled
> "The Turtles Project: Design and Implementation of Nested Virtualization",
> and was awarded "Jay Lepreau Best Paper". The paper is available online, at:
> 
> 	http://www.usenix.org/events/osdi10/tech/full_papers/Ben-Yehuda.pdf
> 
> This patch set does not include all the features described in the paper.
> In particular, this patch set is missing nested EPT (L1 can't use EPT and
> must use shadow page tables). It is also missing some features required to
> run VMWare hypervisors as a guest. These missing features will be sent as
> follow-on patchs.
> 
> Running nested VMX:
> ------------------
> 
> The nested VMX feature is currently disabled by default. It must be
> explicitly enabled with the "nested=1" option to the kvm-intel module.
> 
> No modifications are required to user space (qemu). However, qemu's default
> emulated CPU type (qemu64) does not list the "VMX" CPU feature, so it must
> be
> explicitly enabled, by giving qemu one of the following options:
> 
>      -cpu host              (emulated CPU has all features of the real
> CPU)
> 
>      -cpu qemu64,+vmx       (add just the vmx feature to a named CPU
> type)
> 
> 
> This version was only tested with KVM (64-bit) as a guest hypervisor, and
> Linux as a nested guest.
> 
> 
> Patch statistics:
> -----------------
> 
>  Documentation/kvm/nested-vmx.txt |  251 ++
>  arch/x86/include/asm/kvm_host.h  |    2
>  arch/x86/include/asm/msr-index.h |   12
>  arch/x86/include/asm/vmx.h       |   43
>  arch/x86/kvm/svm.c               |    6
>  arch/x86/kvm/vmx.c               | 2733
> +++++++++++++++++++++++++++--
>  arch/x86/kvm/x86.c               |   11
>  arch/x86/kvm/x86.h               |    8
>  8 files changed, 2907 insertions(+), 159 deletions(-)
> 
> --
> Nadav Har'El
> IBM Haifa Research Lab
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/31] nVMX: Nested VMX, v11

[Marcelo Tosatti]

On Wed, May 25, 2011 at 11:01:22PM +0300, Nadav Har'El wrote:
> Hi,
> 
> This is the eleventh iteration of the nested VMX patch set, and hopefully the
> last in this format.
> 
> Improvements in this version over the previous one include:
> 
>  * Overhauled vmcs, cpu, and launched handling (new loaded_vmcs structure and
>    per-cpu linked-list replacing old vcpu linked-list).
> 
>  * Added missing checks that VMPTRLD was done, in emulating VMLAUNCH and some
>    other VMX instructions.
> 
>  * prepare_vmcs02 is now void, and cannot fail. Correctly handle the case
>    of apic-access page with an invalid GPA.
> 
>  * A bunch of corrections to errors and omissions discovered by Kevin Tian.
> 
>  * Miscellenous function name changes, and other cosmetic improvements.
> 
> This new set of patches applies to the current KVM trunk (I checked with
> 5b186b275c0288c8576d26baebe9019875d68a2b).
> 
> Avi, please apply.
> 
> Nadav.

Applied, thanks.

Re: [PATCH 31/31] nVMX: Documentation

[Jan Kiszka]

On 2011-05-25 22:17, Nadav Har'El wrote:
> This patch includes a brief introduction to the nested vmx feature in the
> Documentation/kvm directory. The document also includes a copy of the
> vmcs12 structure, as requested by Avi Kivity.
> 
> Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
> ---
>  Documentation/kvm/nested-vmx.txt |  251 +++++++++++++++++++++++++++++
>  1 file changed, 251 insertions(+)

This needs to go to Documentation/virtual/kvm.

Jan

-- 
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux

Re: [PATCH 31/31] nVMX: Documentation

[Nadav Har'El]

On Wed, Jun 01, 2011, Jan Kiszka wrote about "Re: [PATCH 31/31] nVMX: Documentation":
> >  Documentation/kvm/nested-vmx.txt |  251 +++++++++++++++++++++++++++++
> 
> This needs to go to Documentation/virtual/kvm.

Oops, I guess the rug moved under my feet while I was preparing this patch
set :-)

Avi, Marcelo, I don't know how to send a patch that only renames a file
(and deletes the superfluous Documentation/kvm directory) - so can you
please fix this directly in your tree?

Thanks,
Nadav.

-- 
Nadav Har'El                        |     Thursday, Jun  2 2011, 29 Iyyar 5771
nyh@math.technion.ac.il             |-----------------------------------------
Phone +972-523-790466, ICQ 13349191 |Bore, n.: A person who talks when you
http://nadav.harel.org.il           |wish him to listen.

Re: [PATCH 31/31] nVMX: Documentation

[Avi Kivity]

On 06/02/2011 11:15 AM, Nadav Har'El wrote:
> On Wed, Jun 01, 2011, Jan Kiszka wrote about "Re: [PATCH 31/31] nVMX: Documentation":
> >  >   Documentation/kvm/nested-vmx.txt |  251 +++++++++++++++++++++++++++++
> >
> >  This needs to go to Documentation/virtual/kvm.
>
> Oops, I guess the rug moved under my feet while I was preparing this patch
> set :-)
>
> Avi, Marcelo, I don't know how to send a patch that only renames a file
> (and deletes the superfluous Documentation/kvm directory) - so can you
> please fix this directly in your tree?
>

I see Marcelo did this.  For reference, you can do this with 'git mv', 
and generate nice patches if you also go 'git config --global 
diff.renames true'

-- 
error compiling committee.c: too many arguments to function