* [PATCH] mfd: Add WM831x clock control register definitions
@ 2011-06-01 14:16 Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2011-06-01 14:16 UTC (permalink / raw)
To: Samuel Oritz; +Cc: linux-kernel, patches, Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
The previous patch disabling the RTC if the crystal is not enabled
requires this one, sorry - managed to miss it from the posting by
mistake.
include/linux/mfd/wm831x/core.h | 101 +++++++++++++++++++++++++++++++++++++++
1 files changed, 101 insertions(+), 0 deletions(-)
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 0d515ee..c9a79d2 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -234,6 +234,107 @@
#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */
#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */
+/*
+ * R16528 (0x4090) - Clock Control 1
+ */
+#define WM831X_CLKOUT_ENA 0x8000 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_MASK 0x8000 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_SHIFT 15 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_WIDTH 1 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_OD 0x2000 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_MASK 0x2000 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_SHIFT 13 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_WIDTH 1 /* CLKOUT_OD */
+#define WM831X_CLKOUT_SLOT_MASK 0x0700 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_SHIFT 8 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_WIDTH 3 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLPSLOT_MASK 0x0070 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_SHIFT 4 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_WIDTH 3 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SRC 0x0001 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_MASK 0x0001 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_SHIFT 0 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_WIDTH 1 /* CLKOUT_SRC */
+
+/*
+ * R16529 (0x4091) - Clock Control 2
+ */
+#define WM831X_XTAL_INH 0x8000 /* XTAL_INH */
+#define WM831X_XTAL_INH_MASK 0x8000 /* XTAL_INH */
+#define WM831X_XTAL_INH_SHIFT 15 /* XTAL_INH */
+#define WM831X_XTAL_INH_WIDTH 1 /* XTAL_INH */
+#define WM831X_XTAL_ENA 0x2000 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_MASK 0x2000 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_SHIFT 13 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_WIDTH 1 /* XTAL_ENA */
+#define WM831X_XTAL_BKUPENA 0x1000 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_MASK 0x1000 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_SHIFT 12 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_WIDTH 1 /* XTAL_BKUPENA */
+#define WM831X_FLL_AUTO 0x0080 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_MASK 0x0080 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_SHIFT 7 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_WIDTH 1 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_FREQ_MASK 0x0007 /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_SHIFT 0 /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_WIDTH 3 /* FLL_AUTO_FREQ - [2:0] */
+
+/*
+ * R16530 (0x4092) - FLL Control 1
+ */
+#define WM831X_FLL_FRAC 0x0004 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_MASK 0x0004 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_SHIFT 2 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_WIDTH 1 /* FLL_FRAC */
+#define WM831X_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */
+#define WM831X_FLL_ENA 0x0001 /* FLL_ENA */
+#define WM831X_FLL_ENA_MASK 0x0001 /* FLL_ENA */
+#define WM831X_FLL_ENA_SHIFT 0 /* FLL_ENA */
+#define WM831X_FLL_ENA_WIDTH 1 /* FLL_ENA */
+
+/*
+ * R16531 (0x4093) - FLL Control 2
+ */
+#define WM831X_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */
+
+/*
+ * R16532 (0x4094) - FLL Control 3
+ */
+#define WM831X_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */
+#define WM831X_FLL_K_SHIFT 0 /* FLL_K - [15:0] */
+#define WM831X_FLL_K_WIDTH 16 /* FLL_K - [15:0] */
+
+/*
+ * R16533 (0x4095) - FLL Control 4
+ */
+#define WM831X_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */
+#define WM831X_FLL_N_SHIFT 5 /* FLL_N - [14:5] */
+#define WM831X_FLL_N_WIDTH 10 /* FLL_N - [14:5] */
+#define WM831X_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */
+
+/*
+ * R16534 (0x4096) - FLL Control 5
+ */
+#define WM831X_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_SRC_MASK 0x0003 /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_SHIFT 0 /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_WIDTH 2 /* FLL_CLK_SRC - [1:0] */
+
struct regulator_dev;
#define WM831X_NUM_IRQ_REGS 5
--
1.7.5.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] mfd: Add WM831x clock control register definitions
2011-06-21 3:03 linux-next: build failure after merge of the mfd tree Stephen Rothwell
@ 2011-06-21 10:12 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2011-06-21 10:12 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Stephen Rothwell, Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
include/linux/mfd/wm831x/core.h | 101 +++++++++++++++++++++++++++++++++++++++
1 files changed, 101 insertions(+), 0 deletions(-)
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index ebead1c..1d93cbe 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -234,6 +234,107 @@
#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */
#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */
+/*
+ * R16528 (0x4090) - Clock Control 1
+ */
+#define WM831X_CLKOUT_ENA 0x8000 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_MASK 0x8000 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_SHIFT 15 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_WIDTH 1 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_OD 0x2000 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_MASK 0x2000 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_SHIFT 13 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_WIDTH 1 /* CLKOUT_OD */
+#define WM831X_CLKOUT_SLOT_MASK 0x0700 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_SHIFT 8 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_WIDTH 3 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLPSLOT_MASK 0x0070 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_SHIFT 4 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_WIDTH 3 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SRC 0x0001 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_MASK 0x0001 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_SHIFT 0 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_WIDTH 1 /* CLKOUT_SRC */
+
+/*
+ * R16529 (0x4091) - Clock Control 2
+ */
+#define WM831X_XTAL_INH 0x8000 /* XTAL_INH */
+#define WM831X_XTAL_INH_MASK 0x8000 /* XTAL_INH */
+#define WM831X_XTAL_INH_SHIFT 15 /* XTAL_INH */
+#define WM831X_XTAL_INH_WIDTH 1 /* XTAL_INH */
+#define WM831X_XTAL_ENA 0x2000 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_MASK 0x2000 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_SHIFT 13 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_WIDTH 1 /* XTAL_ENA */
+#define WM831X_XTAL_BKUPENA 0x1000 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_MASK 0x1000 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_SHIFT 12 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_WIDTH 1 /* XTAL_BKUPENA */
+#define WM831X_FLL_AUTO 0x0080 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_MASK 0x0080 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_SHIFT 7 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_WIDTH 1 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_FREQ_MASK 0x0007 /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_SHIFT 0 /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_WIDTH 3 /* FLL_AUTO_FREQ - [2:0] */
+
+/*
+ * R16530 (0x4092) - FLL Control 1
+ */
+#define WM831X_FLL_FRAC 0x0004 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_MASK 0x0004 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_SHIFT 2 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_WIDTH 1 /* FLL_FRAC */
+#define WM831X_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */
+#define WM831X_FLL_ENA 0x0001 /* FLL_ENA */
+#define WM831X_FLL_ENA_MASK 0x0001 /* FLL_ENA */
+#define WM831X_FLL_ENA_SHIFT 0 /* FLL_ENA */
+#define WM831X_FLL_ENA_WIDTH 1 /* FLL_ENA */
+
+/*
+ * R16531 (0x4093) - FLL Control 2
+ */
+#define WM831X_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */
+
+/*
+ * R16532 (0x4094) - FLL Control 3
+ */
+#define WM831X_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */
+#define WM831X_FLL_K_SHIFT 0 /* FLL_K - [15:0] */
+#define WM831X_FLL_K_WIDTH 16 /* FLL_K - [15:0] */
+
+/*
+ * R16533 (0x4095) - FLL Control 4
+ */
+#define WM831X_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */
+#define WM831X_FLL_N_SHIFT 5 /* FLL_N - [14:5] */
+#define WM831X_FLL_N_WIDTH 10 /* FLL_N - [14:5] */
+#define WM831X_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */
+
+/*
+ * R16534 (0x4096) - FLL Control 5
+ */
+#define WM831X_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_SRC_MASK 0x0003 /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_SHIFT 0 /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_WIDTH 2 /* FLL_CLK_SRC - [1:0] */
+
struct regulator_dev;
#define WM831X_NUM_IRQ_REGS 5
--
1.7.5.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-06-21 10:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-01 14:16 [PATCH] mfd: Add WM831x clock control register definitions Mark Brown
2011-06-21 3:03 linux-next: build failure after merge of the mfd tree Stephen Rothwell
2011-06-21 10:12 ` [PATCH] mfd: Add WM831x clock control register definitions Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.