* Oops on ehci_hcd when booting 3.0.0-rc2 on panda
@ 2011-06-06 10:37 Luciano Coelho
2011-06-06 10:44 ` Felipe Balbi
0 siblings, 1 reply; 24+ messages in thread
From: Luciano Coelho @ 2011-06-06 10:37 UTC (permalink / raw)
To: linux-omap-u79uwXL29TY76Z2rM5mHXA, linux-usb-u79uwXL29TY76Z2rM5mHXA
Cc: balbi-l0cyMroinI0
[-- Attachment #1: Type: text/plain, Size: 4401 bytes --]
Hi,
I'm getting this kernel oops when trying to boot 3.0.0-rc2 on my
pandaboard. Does anyone know what could be causing it?
The full kernel log and my .config are attached.
[ 3.821197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.841735] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[ 3.863464] Internal error: : 1406 [#1] SMP
[ 3.876342] Modules linked in:
[ 3.885772] CPU: 0 Not tainted (3.0.0-rc2 #184)
[ 3.900787] PC is at omap_usbhs_enable+0x134/0x488
[ 3.915557] LR is at trace_hardirqs_off+0x14/0x18
[ 3.930053] pc : [<c02ec13c>] lr : [<c00cd5c8>] psr: 60000093
[ 3.930084] sp : df871db8 ip : df871d70 fp : df871ddc
[ 3.965484] r10: 80000013 r9 : fc064c00 r8 : dfa41464
[ 3.981567] r7 : c06d5058 r6 : dfa48c00 r5 : dfa41420 r4 : df871e51
[ 4.001708] r3 : 00000000 r2 : 00000000 r1 : df86f400 r0 : c070aa08
[ 4.021820] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 4.044647] Control: 10c53c7d Table: 8000404a DAC: 00000015
[ 4.062347] Process swapper (pid: 1, stack limit = 0xdf8702f8)
[ 4.080322] Stack: (0xdf871db8 to 0xdf872000)
[ 4.093749] 1da0: df871e51 df8ce26c
[ 4.118957] 1dc0: dfa48c00 00000003 df8ce260 dfbf0000 df871e84 df871de0 c0368c20 c02ec014
[ 4.144195] 1de0: 22222222 22222222 df871e38 dfbf4388 dfbf4308 df871e38 df871e24 df871e08
[ 4.169403] 1e00: 00000000 dfbf4308 dfa48c08 dfbee160 0000006d 00000001 df871e64 df871e28
[ 4.194641] 1e20: c01a0bdc c01a0284 df871e4c c00bf518 c00cf7e0 c00cf450 dfa43ec8 00000000
[ 4.219848] 1e40: dfa48c08 00000000 dfa48c10 dfbee160 757368a0 00306273 df871e74 dfa48c08
[ 4.245086] 1e60: dfa48c08 c06f3c0c dfbee160 c06ea6a0 00000000 00000000 df871e94 df871e88
[ 4.270294] 1e80: c02dd8f0 c0368a80 df871ebc df871e98 c02dc254 c02dd8d4 dfa48c08 dfa48c3c
[ 4.295532] 1ea0: c06f3c0c dfa48c08 dfa48c3c c06f3c0c df871edc df871ec0 c02dc3f4 c02dc104
[ 4.320739] 1ec0: 00000000 c02dc37c c06f3c0c dfbee160 df871f04 df871ee0 c02db7f8 c02dc388
[ 4.345977] 1ee0: df89b658 dfa413f0 c027f8a8 c0c5774c c0c57cf8 c06f3c0c df871f14 df871f08
[ 4.371215] 1f00: c02dbf34 c02db7ac df871f44 df871f18 c02dafd4 c02dbf18 c05ec331 df871f28
[ 4.396423] 1f20: c0c5774c c0c57cf8 c06f3c0c 00000013 00000000 c00282c0 df871f6c df871f48
[ 4.421661] 1f40: c02dcad8 c02daf08 c0c5774c c0c57cf8 c006300c 00000013 00000000 00000000
[ 4.446868] 1f60: df871f7c df871f70 c02ddde0 c02dca2c df871f9c df871f80 c0028368 c02ddd98
[ 4.472106] 1f80: 000000a0 00000060 c00333ac c0008554 df871fdc df871fa0 c00565e8 c00282cc
[ 4.497314] 1fa0: 00000000 0000019a c006300c c00e651c df871fdc c00333ac c0008554 c006300c
[ 4.522552] 1fc0: 00000013 00000000 00000000 00000000 df871ff4 df871fe0 c00085fc c0056550
[ 4.547760] 1fe0: 00000000 c0008554 00000000 df871ff8 c006300c c0008560 c0080000 f3ac400e
[ 4.572998] [<c02ec13c>] (omap_usbhs_enable+0x134/0x488) from [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584)
[ 4.603332] [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584) from [<c02dd8f0>] (platform_drv_probe+0x28/0x2c)
[ 4.633392] [<c02dd8f0>] (platform_drv_probe+0x28/0x2c) from [<c02dc254>] (driver_probe_device+0x15c/0x284)
[ 4.663452] [<c02dc254>] (driver_probe_device+0x15c/0x284) from [<c02dc3f4>] (__driver_attach+0x78/0x9c)
[ 4.692687] [<c02dc3f4>] (__driver_attach+0x78/0x9c) from [<c02db7f8>] (bus_for_each_dev+0x58/0x8c)
[ 4.720611] [<c02db7f8>] (bus_for_each_dev+0x58/0x8c) from [<c02dbf34>] (driver_attach+0x28/0x30)
[ 4.747985] [<c02dbf34>] (driver_attach+0x28/0x30) from [<c02dafd4>] (bus_add_driver+0xd8/0x268)
[ 4.775085] [<c02dafd4>] (bus_add_driver+0xd8/0x268) from [<c02dcad8>] (driver_register+0xb8/0x140)
[ 4.802978] [<c02dcad8>] (driver_register+0xb8/0x140) from [<c02ddde0>] (platform_driver_register+0x54/0x68)
[ 4.833343] [<c02ddde0>] (platform_driver_register+0x54/0x68) from [<c0028368>] (ehci_hcd_init+0xa8/0xfc)
[ 4.862854] [<c0028368>] (ehci_hcd_init+0xa8/0xfc) from [<c00565e8>] (do_one_initcall+0xa4/0x178)
[ 4.890228] [<c00565e8>] (do_one_initcall+0xa4/0x178) from [<c00085fc>] (kernel_init+0xa8/0x15c)
[ 4.917327] [<c00085fc>] (kernel_init+0xa8/0x15c) from [<c006300c>] (kernel_thread_exit+0x0/0x8)
[ 4.944427] Code: e59f032c e1a01007 e59f233c ebffb0b0 (e5953024)
--
Cheers,
Luca.
[-- Attachment #2: panda_boot_oops-3.0.0-rc1.txt --]
[-- Type: text/plain, Size: 20646 bytes --]
[ 0.000000] Linux version 3.0.0-rc2 (luca@cumari) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #184 SMP Mon Jun 6 13:18:52 EEST 2011
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1068000 s6240 r8192 d14240 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyO2,38400n8 mem=512M init=/init vram=32M omapfb.vram=0:16M console=ttyO2 root=/dev/mmcblk0p5 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 507032k/507032k available, 17256k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0056000 ( 312 kB)
[ 0.000000] .text : 0xc0056000 - 0xc06a89c0 (6475 kB)
[ 0.000000] .data : 0xc06aa000 - 0xc070a3f0 ( 385 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000915] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
[ 0.062499] pid_max: default: 32768 minimum: 301
[ 0.063232] Security Framework initialized
[ 0.063659] Mount-cache hash table entries: 512
[ 0.068328] CPU: Testing write buffer coherency: ok
[ 0.068511] ftrace: allocating 17945 entries in 53 pages
[ 0.086517] Calibrating local timer... 491.91MHz.
[ 0.133026] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.133148] L310 cache controller enabled
[ 0.133178] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[ 0.136138] CPU1: Booted secondary processor
[ 0.136138] CPU1: Unknown IPI message 0x1
[ 0.163604] Brought up 2 CPUs
[ 0.163635] SMP: Total of 2 processors activated (3963.96 BogoMIPS).
[ 0.172546] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[ 0.172546] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
[ 0.172546] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
[ 0.172576] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
[ 0.172607] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[ 0.172607] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[ 0.172637] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[ 0.172637] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[ 0.172637] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
[ 0.172668] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp
[ 0.172698] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for ipu
[ 0.172973] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.189666] omap_hwmod: ipu: failed to hardreset
[ 0.193450] print_constraints: dummy:
[ 0.194274] NET: Registered protocol family 16
[ 0.194885] GPMC revision 6.0
[ 0.199127] omap_device: omap_gpio.0: new worst case activate latency 0: 61035
[ 0.200439] OMAP GPIO hardware version 0.1
[ 0.201080] OMAP GPIO hardware version 0.1
[ 0.201721] OMAP GPIO hardware version 0.1
[ 0.202301] OMAP GPIO hardware version 0.1
[ 0.202880] OMAP GPIO hardware version 0.1
[ 0.203491] OMAP GPIO hardware version 0.1
[ 0.206329] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.207763] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.212158] omap_device: omap_uart.3: new worst case activate latency 0: 30517
[ 0.215423] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.215423] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[ 0.215454] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.220153] pm_dbg_init: only OMAP3 supported
[ 0.220397] OMAP DMA hardware revision 0.0
[ 0.250915] bio: create slab <bio-0> at 0
[ 0.252746] print_constraints: vwl1271: 1800 mV
[ 0.255462] SCSI subsystem initialized
[ 0.255798] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517
[ 0.260101] usbcore: registered new interface driver usbfs
[ 0.260589] usbcore: registered new interface driver hub
[ 0.260925] usbcore: registered new device driver usb
[ 0.263153] omap_device: omap_i2c.1: new worst case activate latency 0: 30517
[ 0.263275] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[ 0.265747] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 0.266845] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.268341] print_constraints: VUSB: 3300 mV normal standby
[ 0.466857] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.467864] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.468933] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.469909] print_constraints: VCXIO: 1800 mV normal standby
[ 0.470794] print_constraints: VDAC: 1800 mV normal standby
[ 0.472564] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.473602] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.474487] print_constraints: CLK32KG:
[ 0.475341] print_constraints: VANA: 2100 mV normal standby
[ 0.483734] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[ 0.498840] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
[ 0.514099] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[ 0.518188] Switching to clocksource 32k_counter
[ 0.521789] Switched to NOHz mode on CPU #0
[ 0.524841] Switched to NOHz mode on CPU #1
[ 0.565399] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
[ 0.565551] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517
[ 0.566070] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
[ 0.566955] NET: Registered protocol family 2
[ 0.567413] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.568511] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.568969] TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
[ 0.573242] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.573364] TCP reno registered
[ 0.573394] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 0.573547] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 0.574188] NET: Registered protocol family 1
[ 0.575012] RPC: Registered named UNIX socket transport module.
[ 0.575042] RPC: Registered udp transport module.
[ 0.575042] RPC: Registered tcp transport module.
[ 0.575042] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.575592] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.703033] VFS: Disk quotas dquot_6.5.2
[ 0.703247] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.704559] JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
[ 0.705017] msgmni has been set to 990
[ 0.707397] io scheduler noop registered
[ 0.707397] io scheduler deadline registered
[ 0.707489] io scheduler cfq registered (default)
[ 0.709381] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.808105] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.831054] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.854461] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 3.349151] console [ttyO2] enabled
[ 3.370117] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 3.431915] brd: module loaded
[ 3.448638] loop: module loaded
[ 3.460937] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 3.483581] usbcore: registered new interface driver asix
[ 3.500518] usbcore: registered new interface driver cdc_ether
[ 3.518768] usbcore: registered new interface driver cdc_eem
[ 3.536468] usbcore: registered new interface driver dm9601
[ 3.553955] usbcore: registered new interface driver smsc75xx
[ 3.571960] usbcore: registered new interface driver smsc95xx
[ 3.589935] usbcore: registered new interface driver gl620a
[ 3.607421] usbcore: registered new interface driver net1080
[ 3.625122] usbcore: registered new interface driver plusb
[ 3.642303] usbcore: registered new interface driver rndis_host
[ 3.660827] usbcore: registered new interface driver cdc_subset
[ 3.679351] usbcore: registered new interface driver zaurus
[ 3.696777] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 3.719879] usbcore: registered new interface driver int51x1
[ 3.737609] usbcore: registered new interface driver ipheth
[ 3.755065] usbcore: registered new interface driver sierra_net
[ 3.773590] usbcore: registered new interface driver cx82310_eth
[ 3.792144] cdc_ncm: 01-June-2011
[ 3.802612] usbcore: registered new interface driver cdc_ncm
[ 3.821197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.841735] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[ 3.863464] Internal error: : 1406 [#1] SMP
[ 3.876342] Modules linked in:
[ 3.885772] CPU: 0 Not tainted (3.0.0-rc2 #184)
[ 3.900787] PC is at omap_usbhs_enable+0x134/0x488
[ 3.915557] LR is at trace_hardirqs_off+0x14/0x18
[ 3.930053] pc : [<c02ec13c>] lr : [<c00cd5c8>] psr: 60000093
[ 3.930084] sp : df871db8 ip : df871d70 fp : df871ddc
[ 3.965484] r10: 80000013 r9 : fc064c00 r8 : dfa41464
[ 3.981567] r7 : c06d5058 r6 : dfa48c00 r5 : dfa41420 r4 : df871e51
[ 4.001708] r3 : 00000000 r2 : 00000000 r1 : df86f400 r0 : c070aa08
[ 4.021820] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 4.044647] Control: 10c53c7d Table: 8000404a DAC: 00000015
[ 4.062347] Process swapper (pid: 1, stack limit = 0xdf8702f8)
[ 4.080322] Stack: (0xdf871db8 to 0xdf872000)
[ 4.093749] 1da0: df871e51 df8ce26c
[ 4.118957] 1dc0: dfa48c00 00000003 df8ce260 dfbf0000 df871e84 df871de0 c0368c20 c02ec014
[ 4.144195] 1de0: 22222222 22222222 df871e38 dfbf4388 dfbf4308 df871e38 df871e24 df871e08
[ 4.169403] 1e00: 00000000 dfbf4308 dfa48c08 dfbee160 0000006d 00000001 df871e64 df871e28
[ 4.194641] 1e20: c01a0bdc c01a0284 df871e4c c00bf518 c00cf7e0 c00cf450 dfa43ec8 00000000
[ 4.219848] 1e40: dfa48c08 00000000 dfa48c10 dfbee160 757368a0 00306273 df871e74 dfa48c08
[ 4.245086] 1e60: dfa48c08 c06f3c0c dfbee160 c06ea6a0 00000000 00000000 df871e94 df871e88
[ 4.270294] 1e80: c02dd8f0 c0368a80 df871ebc df871e98 c02dc254 c02dd8d4 dfa48c08 dfa48c3c
[ 4.295532] 1ea0: c06f3c0c dfa48c08 dfa48c3c c06f3c0c df871edc df871ec0 c02dc3f4 c02dc104
[ 4.320739] 1ec0: 00000000 c02dc37c c06f3c0c dfbee160 df871f04 df871ee0 c02db7f8 c02dc388
[ 4.345977] 1ee0: df89b658 dfa413f0 c027f8a8 c0c5774c c0c57cf8 c06f3c0c df871f14 df871f08
[ 4.371215] 1f00: c02dbf34 c02db7ac df871f44 df871f18 c02dafd4 c02dbf18 c05ec331 df871f28
[ 4.396423] 1f20: c0c5774c c0c57cf8 c06f3c0c 00000013 00000000 c00282c0 df871f6c df871f48
[ 4.421661] 1f40: c02dcad8 c02daf08 c0c5774c c0c57cf8 c006300c 00000013 00000000 00000000
[ 4.446868] 1f60: df871f7c df871f70 c02ddde0 c02dca2c df871f9c df871f80 c0028368 c02ddd98
[ 4.472106] 1f80: 000000a0 00000060 c00333ac c0008554 df871fdc df871fa0 c00565e8 c00282cc
[ 4.497314] 1fa0: 00000000 0000019a c006300c c00e651c df871fdc c00333ac c0008554 c006300c
[ 4.522552] 1fc0: 00000013 00000000 00000000 00000000 df871ff4 df871fe0 c00085fc c0056550
[ 4.547760] 1fe0: 00000000 c0008554 00000000 df871ff8 c006300c c0008560 c0080000 f3ac400e
[ 4.572998] [<c02ec13c>] (omap_usbhs_enable+0x134/0x488) from [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584)
[ 4.603332] [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584) from [<c02dd8f0>] (platform_drv_probe+0x28/0x2c)
[ 4.633392] [<c02dd8f0>] (platform_drv_probe+0x28/0x2c) from [<c02dc254>] (driver_probe_device+0x15c/0x284)
[ 4.663452] [<c02dc254>] (driver_probe_device+0x15c/0x284) from [<c02dc3f4>] (__driver_attach+0x78/0x9c)
[ 4.692687] [<c02dc3f4>] (__driver_attach+0x78/0x9c) from [<c02db7f8>] (bus_for_each_dev+0x58/0x8c)
[ 4.720611] [<c02db7f8>] (bus_for_each_dev+0x58/0x8c) from [<c02dbf34>] (driver_attach+0x28/0x30)
[ 4.747985] [<c02dbf34>] (driver_attach+0x28/0x30) from [<c02dafd4>] (bus_add_driver+0xd8/0x268)
[ 4.775085] [<c02dafd4>] (bus_add_driver+0xd8/0x268) from [<c02dcad8>] (driver_register+0xb8/0x140)
[ 4.802978] [<c02dcad8>] (driver_register+0xb8/0x140) from [<c02ddde0>] (platform_driver_register+0x54/0x68)
[ 4.833343] [<c02ddde0>] (platform_driver_register+0x54/0x68) from [<c0028368>] (ehci_hcd_init+0xa8/0xfc)
[ 4.862854] [<c0028368>] (ehci_hcd_init+0xa8/0xfc) from [<c00565e8>] (do_one_initcall+0xa4/0x178)
[ 4.890228] [<c00565e8>] (do_one_initcall+0xa4/0x178) from [<c00085fc>] (kernel_init+0xa8/0x15c)
[ 4.917327] [<c00085fc>] (kernel_init+0xa8/0x15c) from [<c006300c>] (kernel_thread_exit+0x0/0x8)
[ 4.944427] Code: e59f032c e1a01007 e59f233c ebffb0b0 (e5953024)
[ 4.963256] ------------[ cut here ]------------
[ 4.977508] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106 l3_interrupt_handler+0xec/0x140()
[ 5.004333] CUSTOM SRESP error with SOURCE:L4CFG
[ 5.018554] Modules linked in:
[ 5.027984] [<c0069d64>] (unwind_backtrace+0x0/0x134) from [<c04a0858>] (dump_stack+0x20/0x24)
[ 5.054565] [<c04a0858>] (dump_stack+0x20/0x24) from [<c0098f5c>] (warn_slowpath_common+0x5c/0x74)
[ 5.082183] [<c0098f5c>] (warn_slowpath_common+0x5c/0x74) from [<c0099030>] (warn_slowpath_fmt+0x40/0x48)
[ 5.111724] [<c0099030>] (warn_slowpath_fmt+0x40/0x48) from [<c007cdec>] (l3_interrupt_handler+0xec/0x140)
[ 5.141510] [<c007cdec>] (l3_interrupt_handler+0xec/0x140) from [<c00e1f74>] (handle_irq_event_percpu+0x7c/0x20c)
[ 5.173187] [<c00e1f74>] (handle_irq_event_percpu+0x7c/0x20c) from [<c00e2150>] (handle_irq_event+0x4c/0x6c)
[ 5.203521] [<c00e2150>] (handle_irq_event+0x4c/0x6c) from [<c00e4a70>] (handle_fasteoi_irq+0xd8/0x110)
[ 5.232482] [<c00e4a70>] (handle_fasteoi_irq+0xd8/0x110) from [<c00e1af8>] (generic_handle_irq+0x38/0x40)
[ 5.262023] [<c00e1af8>] (generic_handle_irq+0x38/0x40) from [<c0056308>] (asm_do_IRQ+0x88/0xc8)
[ 5.289123] [<c0056308>] (asm_do_IRQ+0x88/0xc8) from [<c04a4d38>] (__irq_svc+0x38/0xc0)
[ 5.313812] Exception stack(0xdf871af0 to 0xdf871b38)
[ 5.329376] 1ae0: c00a03c4 df86f400 00000000 df870000
[ 5.354583] 1b00: 00000000 df870000 01014000 00000001 df871c67 0000000a 00000082 df871b74
[ 5.379821] 1b20: df871b28 df871b38 c00cf828 c00a03c8 60000013 ffffffff
[ 5.400207] [<c04a4d38>] (__irq_svc+0x38/0xc0) from [<c00a03c8>] (__do_softirq+0x70/0x1f8)
[ 5.425720] [<c00a03c8>] (__do_softirq+0x70/0x1f8) from [<c00a0724>] (irq_exit+0x64/0xb0)
[ 5.450958] [<c00a0724>] (irq_exit+0x64/0xb0) from [<c0067578>] (ipi_timer+0x48/0x54)
[ 5.475097] [<c0067578>] (ipi_timer+0x48/0x54) from [<c00564e4>] (do_local_timer+0x60/0x90)
[ 5.500854] [<c00564e4>] (do_local_timer+0x60/0x90) from [<c04a4d38>] (__irq_svc+0x38/0xc0)
[ 5.526611] Exception stack(0xdf871bc8 to 0xdf871c10)
[ 5.542175] 1bc0: c04a49f0 c0702cf8 00000000 df870000 c06c4498 df871d70
[ 5.567413] 1be0: c02ec140 00000001 df871c67 00000000 df870000 df871c24 df871c00 df871c10
[ 5.592620] 1c00: c00cf828 c04a49f4 60000013 ffffffff
[ 5.608215] [<c04a4d38>] (__irq_svc+0x38/0xc0) from [<c04a49f4>] (_raw_spin_unlock_irq+0x38/0x3c)
[ 5.635589] [<c04a49f4>] (_raw_spin_unlock_irq+0x38/0x3c) from [<c0066584>] (die+0x244/0x2dc)
[ 5.661865] [<c0066584>] (die+0x244/0x2dc) from [<c00666f0>] (arm_notify_die+0x64/0x68)
[ 5.686553] [<c00666f0>] (arm_notify_die+0x64/0x68) from [<c005626c>] (do_DataAbort+0x90/0xa4)
[ 5.713134] [<c005626c>] (do_DataAbort+0x90/0xa4) from [<c04a4cec>] (__dabt_svc+0x4c/0x60)
[ 5.738616] Exception stack(0xdf871d70 to 0xdf871db8)
[ 5.754180] 1d60: c070aa08 df86f400 00000000 00000000
[ 5.779418] 1d80: df871e51 dfa41420 dfa48c00 c06d5058 dfa41464 fc064c00 80000013 df871ddc
[ 5.804626] 1da0: df871d70 df871db8 c00cd5c8 c02ec13c 60000093 ffffffff
[ 5.825042] [<c04a4cec>] (__dabt_svc+0x4c/0x60) from [<c02ec13c>] (omap_usbhs_enable+0x134/0x488)
[ 5.852416] [<c02ec13c>] (omap_usbhs_enable+0x134/0x488) from [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584)
[ 5.882720] [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584) from [<c02dd8f0>] (platform_drv_probe+0x28/0x2c)
[ 5.912780] [<c02dd8f0>] (platform_drv_probe+0x28/0x2c) from [<c02dc254>] (driver_probe_device+0x15c/0x284)
[ 5.942840] [<c02dc254>] (driver_probe_device+0x15c/0x284) from [<c02dc3f4>] (__driver_attach+0x78/0x9c)
[ 5.972106] [<c02dc3f4>] (__driver_attach+0x78/0x9c) from [<c02db7f8>] (bus_for_each_dev+0x58/0x8c)
[ 5.999999] [<c02db7f8>] (bus_for_each_dev+0x58/0x8c) from [<c02dbf34>] (driver_attach+0x28/0x30)
[ 6.027374] [<c02dbf34>] (driver_attach+0x28/0x30) from [<c02dafd4>] (bus_add_driver+0xd8/0x268)
[ 6.054473] [<c02dafd4>] (bus_add_driver+0xd8/0x268) from [<c02dcad8>] (driver_register+0xb8/0x140)
[ 6.082397] [<c02dcad8>] (driver_register+0xb8/0x140) from [<c02ddde0>] (platform_driver_register+0x54/0x68)
[ 6.112701] [<c02ddde0>] (platform_driver_register+0x54/0x68) from [<c0028368>] (ehci_hcd_init+0xa8/0xfc)
[ 6.142242] [<c0028368>] (ehci_hcd_init+0xa8/0xfc) from [<c00565e8>] (do_one_initcall+0xa4/0x178)
[ 6.169586] [<c00565e8>] (do_one_initcall+0xa4/0x178) from [<c00085fc>] (kernel_init+0xa8/0x15c)
[ 6.196716] [<c00085fc>] (kernel_init+0xa8/0x15c) from [<c006300c>] (kernel_thread_exit+0x0/0x8)
[ 6.223815] ---[ end trace ad24bd7f29ab0a14 ]---
[ 6.238098] ---[ end trace ad24bd7f29ab0a15 ]---
[ 6.252349] Kernel panic - not syncing: Attempted to kill init!
[ 6.270629] CPU1: stopping
[ 6.278961] [<c0069d64>] (unwind_backtrace+0x0/0x134) from [<c04a0858>] (dump_stack+0x20/0x24)
[ 6.305541] [<c04a0858>] (dump_stack+0x20/0x24) from [<c0056410>] (do_IPI+0xc8/0x13c)
[ 6.329681] [<c0056410>] (do_IPI+0xc8/0x13c) from [<c04a4d38>] (__irq_svc+0x38/0xc0)
[ 6.353546] Exception stack(0xdf8b9f68 to 0xdf8b9fb0)
[ 6.369140] 9f60: c0063130 df8b7480 00000000 df8b8000 df8b8000 df8b8000
[ 6.394348] 9f80: 00000001 c070a68c 8000406a 411fc092 00000000 df8b9fbc df8b9fa0 df8b9fb0
[ 6.419586] 9fa0: c00cf828 c0063134 60000113 ffffffff
[ 6.435150] [<c04a4d38>] (__irq_svc+0x38/0xc0) from [<c0063134>] (default_idle+0x38/0x3c)
[ 6.460357] [<c0063134>] (default_idle+0x38/0x3c) from [<c0063848>] (cpu_idle+0xa4/0x100)
[ 6.485595] [<c0063848>] (cpu_idle+0xa4/0x100) from [<c049d3b8>] (secondary_start_kernel+0x108/0x118)
[ 6.514038] [<c049d3b8>] (secondary_start_kernel+0x108/0x118) from [<8049cf14>] (0x8049cf14)
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 64087 bytes --]
#
# Automatically generated make config: don't edit
# Linux/arm 3.0.0-rc2 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_SCHED_CLOCK=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_KTIME_SCALAR=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS4 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_TCC_926 is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_VT8500 is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
#
# TI OMAP Common Features
#
# CONFIG_ARCH_OMAP1 is not set
CONFIG_ARCH_OMAP2PLUS=y
#
# OMAP Feature Selections
#
# CONFIG_OMAP_SMARTREFLEX is not set
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
# CONFIG_OMAP_PM_NONE is not set
CONFIG_OMAP_PM_NOOP=y
#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
# CONFIG_ARCH_OMAP2 is not set
# CONFIG_ARCH_OMAP3 is not set
CONFIG_ARCH_OMAP4=y
CONFIG_OMAP_PACKAGE_CBL=y
CONFIG_OMAP_PACKAGE_CBS=y
#
# OMAP Board Type
#
CONFIG_MACH_OMAP_4430SDP=y
CONFIG_MACH_OMAP4_PANDA=y
#
# System MMU
#
#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_CACHE_L2X0=y
CONFIG_CACHE_PL310=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
# CONFIG_ARM_ERRATA_742230 is not set
# CONFIG_ARM_ERRATA_742231 is not set
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_ERRATA_720789=y
CONFIG_PL310_ERRATA_727915=y
# CONFIG_ARM_ERRATA_743622 is not set
# CONFIG_ARM_ERRATA_751472 is not set
# CONFIG_ARM_ERRATA_753970 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_754327 is not set
CONFIG_ARM_GIC=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
#
# PC-card bridges
#
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_TWD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
CONFIG_LOCAL_TIMERS=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=128
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_LEDS=y
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
#
# Boot options
#
# CONFIG_USE_OF is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_HAS_OPP=y
CONFIG_PM_OPP=y
CONFIG_PM_RUNTIME_CLK=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_NOINLINE is not set
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_TKIP_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
# CONFIG_MAC80211_DEBUG_COUNTERS is not set
CONFIG_MAC80211_DRIVER_API_TRACER=y
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_MII=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM63XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
CONFIG_WL12XX_MENU=m
CONFIG_WL12XX=m
# CONFIG_WL12XX_HT is not set
CONFIG_WL12XX_SPI=m
CONFIG_WL12XX_SDIO=m
# CONFIG_WL12XX_SDIO_TEST is not set
CONFIG_WL12XX_PLATFORM_DATA=y
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
# CONFIG_USB_VL600 is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_BASIC_MMIO is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_EXYNOS4 is not set
# CONFIG_GPIO_PLAT_SAMSUNG is not set
# CONFIG_GPIO_S5PC100 is not set
# CONFIG_GPIO_S5PV210 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_MPCORE_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
CONFIG_TWL4030_POWER=y
# CONFIG_TWL4030_CODEC is not set
# CONFIG_TWL6030_PWM is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_OMAP_USB_HOST=y
# CONFIG_MFD_TPS65910 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_OMAP2_DSS is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_ADP8860 is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
CONFIG_SND_SOC=m
# CONFIG_SND_SOC_CACHE_LZO is not set
CONFIG_SND_OMAP_SOC=m
# CONFIG_SND_OMAP_SOC_SDP4430 is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_HCD_OMAP=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_OMAP3=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_HWA_HCD=m
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_TUSB6010 is not set
CONFIG_USB_MUSB_OMAP2PLUS=y
# CONFIG_USB_MUSB_AM35X is not set
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_UX500_DMA is not set
CONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TI_CPPI_DMA is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_FUSB300 is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA_U2O is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
CONFIG_TWL4030_USB=y
CONFIG_TWL6030_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=m
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
# CONFIG_HWSPINLOCK is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
CONFIG_OLD_MCOUNT=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_OC_ETM is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-06-06 10:37 Oops on ehci_hcd when booting 3.0.0-rc2 on panda Luciano Coelho
@ 2011-06-06 10:44 ` Felipe Balbi
2011-06-06 11:02 ` Felipe Balbi
0 siblings, 1 reply; 24+ messages in thread
From: Felipe Balbi @ 2011-06-06 10:44 UTC (permalink / raw)
To: Luciano Coelho; +Cc: linux-omap, linux-usb, balbi
[-- Attachment #1: Type: text/plain, Size: 4773 bytes --]
hi,
On Mon, Jun 06, 2011 at 01:37:23PM +0300, Luciano Coelho wrote:
> I'm getting this kernel oops when trying to boot 3.0.0-rc2 on my
> pandaboard. Does anyone know what could be causing it?
>
> The full kernel log and my .config are attached.
>
> [ 3.821197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 3.841735] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> [ 3.863464] Internal error: : 1406 [#1] SMP
> [ 3.876342] Modules linked in:
> [ 3.885772] CPU: 0 Not tainted (3.0.0-rc2 #184)
> [ 3.900787] PC is at omap_usbhs_enable+0x134/0x488
> [ 3.915557] LR is at trace_hardirqs_off+0x14/0x18
> [ 3.930053] pc : [<c02ec13c>] lr : [<c00cd5c8>] psr: 60000093
> [ 3.930084] sp : df871db8 ip : df871d70 fp : df871ddc
> [ 3.965484] r10: 80000013 r9 : fc064c00 r8 : dfa41464
> [ 3.981567] r7 : c06d5058 r6 : dfa48c00 r5 : dfa41420 r4 : df871e51
> [ 4.001708] r3 : 00000000 r2 : 00000000 r1 : df86f400 r0 : c070aa08
> [ 4.021820] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> [ 4.044647] Control: 10c53c7d Table: 8000404a DAC: 00000015
> [ 4.062347] Process swapper (pid: 1, stack limit = 0xdf8702f8)
> [ 4.080322] Stack: (0xdf871db8 to 0xdf872000)
> [ 4.093749] 1da0: df871e51 df8ce26c
> [ 4.118957] 1dc0: dfa48c00 00000003 df8ce260 dfbf0000 df871e84 df871de0 c0368c20 c02ec014
> [ 4.144195] 1de0: 22222222 22222222 df871e38 dfbf4388 dfbf4308 df871e38 df871e24 df871e08
> [ 4.169403] 1e00: 00000000 dfbf4308 dfa48c08 dfbee160 0000006d 00000001 df871e64 df871e28
> [ 4.194641] 1e20: c01a0bdc c01a0284 df871e4c c00bf518 c00cf7e0 c00cf450 dfa43ec8 00000000
> [ 4.219848] 1e40: dfa48c08 00000000 dfa48c10 dfbee160 757368a0 00306273 df871e74 dfa48c08
> [ 4.245086] 1e60: dfa48c08 c06f3c0c dfbee160 c06ea6a0 00000000 00000000 df871e94 df871e88
> [ 4.270294] 1e80: c02dd8f0 c0368a80 df871ebc df871e98 c02dc254 c02dd8d4 dfa48c08 dfa48c3c
> [ 4.295532] 1ea0: c06f3c0c dfa48c08 dfa48c3c c06f3c0c df871edc df871ec0 c02dc3f4 c02dc104
> [ 4.320739] 1ec0: 00000000 c02dc37c c06f3c0c dfbee160 df871f04 df871ee0 c02db7f8 c02dc388
> [ 4.345977] 1ee0: df89b658 dfa413f0 c027f8a8 c0c5774c c0c57cf8 c06f3c0c df871f14 df871f08
> [ 4.371215] 1f00: c02dbf34 c02db7ac df871f44 df871f18 c02dafd4 c02dbf18 c05ec331 df871f28
> [ 4.396423] 1f20: c0c5774c c0c57cf8 c06f3c0c 00000013 00000000 c00282c0 df871f6c df871f48
> [ 4.421661] 1f40: c02dcad8 c02daf08 c0c5774c c0c57cf8 c006300c 00000013 00000000 00000000
> [ 4.446868] 1f60: df871f7c df871f70 c02ddde0 c02dca2c df871f9c df871f80 c0028368 c02ddd98
> [ 4.472106] 1f80: 000000a0 00000060 c00333ac c0008554 df871fdc df871fa0 c00565e8 c00282cc
> [ 4.497314] 1fa0: 00000000 0000019a c006300c c00e651c df871fdc c00333ac c0008554 c006300c
> [ 4.522552] 1fc0: 00000013 00000000 00000000 00000000 df871ff4 df871fe0 c00085fc c0056550
> [ 4.547760] 1fe0: 00000000 c0008554 00000000 df871ff8 c006300c c0008560 c0080000 f3ac400e
> [ 4.572998] [<c02ec13c>] (omap_usbhs_enable+0x134/0x488) from [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584)
> [ 4.603332] [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584) from [<c02dd8f0>] (platform_drv_probe+0x28/0x2c)
> [ 4.633392] [<c02dd8f0>] (platform_drv_probe+0x28/0x2c) from [<c02dc254>] (driver_probe_device+0x15c/0x284)
> [ 4.663452] [<c02dc254>] (driver_probe_device+0x15c/0x284) from [<c02dc3f4>] (__driver_attach+0x78/0x9c)
> [ 4.692687] [<c02dc3f4>] (__driver_attach+0x78/0x9c) from [<c02db7f8>] (bus_for_each_dev+0x58/0x8c)
> [ 4.720611] [<c02db7f8>] (bus_for_each_dev+0x58/0x8c) from [<c02dbf34>] (driver_attach+0x28/0x30)
> [ 4.747985] [<c02dbf34>] (driver_attach+0x28/0x30) from [<c02dafd4>] (bus_add_driver+0xd8/0x268)
> [ 4.775085] [<c02dafd4>] (bus_add_driver+0xd8/0x268) from [<c02dcad8>] (driver_register+0xb8/0x140)
> [ 4.802978] [<c02dcad8>] (driver_register+0xb8/0x140) from [<c02ddde0>] (platform_driver_register+0x54/0x68)
> [ 4.833343] [<c02ddde0>] (platform_driver_register+0x54/0x68) from [<c0028368>] (ehci_hcd_init+0xa8/0xfc)
> [ 4.862854] [<c0028368>] (ehci_hcd_init+0xa8/0xfc) from [<c00565e8>] (do_one_initcall+0xa4/0x178)
> [ 4.890228] [<c00565e8>] (do_one_initcall+0xa4/0x178) from [<c00085fc>] (kernel_init+0xa8/0x15c)
> [ 4.917327] [<c00085fc>] (kernel_init+0xa8/0x15c) from [<c006300c>] (kernel_thread_exit+0x0/0x8)
> [ 4.944427] Code: e59f032c e1a01007 e59f233c ebffb0b0 (e5953024)
looks like this is resulting from the missing hwmod conversion in
mainlnie. Check if reverting 7e6502d577106fb5b202bbaac64c5f1b065e6daa
helps.
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-06-06 10:44 ` Felipe Balbi
@ 2011-06-06 11:02 ` Felipe Balbi
2011-06-06 11:05 ` Luciano Coelho
0 siblings, 1 reply; 24+ messages in thread
From: Felipe Balbi @ 2011-06-06 11:02 UTC (permalink / raw)
To: Felipe Balbi; +Cc: Luciano Coelho, linux-omap, linux-usb, Keshava Munegowda
[-- Attachment #1: Type: text/plain, Size: 4852 bytes --]
Hi,
On Mon, Jun 06, 2011 at 01:44:18PM +0300, Felipe Balbi wrote:
> > [ 3.821197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [ 3.841735] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> > [ 3.863464] Internal error: : 1406 [#1] SMP
> > [ 3.876342] Modules linked in:
> > [ 3.885772] CPU: 0 Not tainted (3.0.0-rc2 #184)
> > [ 3.900787] PC is at omap_usbhs_enable+0x134/0x488
> > [ 3.915557] LR is at trace_hardirqs_off+0x14/0x18
> > [ 3.930053] pc : [<c02ec13c>] lr : [<c00cd5c8>] psr: 60000093
> > [ 3.930084] sp : df871db8 ip : df871d70 fp : df871ddc
> > [ 3.965484] r10: 80000013 r9 : fc064c00 r8 : dfa41464
> > [ 3.981567] r7 : c06d5058 r6 : dfa48c00 r5 : dfa41420 r4 : df871e51
> > [ 4.001708] r3 : 00000000 r2 : 00000000 r1 : df86f400 r0 : c070aa08
> > [ 4.021820] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> > [ 4.044647] Control: 10c53c7d Table: 8000404a DAC: 00000015
> > [ 4.062347] Process swapper (pid: 1, stack limit = 0xdf8702f8)
> > [ 4.080322] Stack: (0xdf871db8 to 0xdf872000)
> > [ 4.093749] 1da0: df871e51 df8ce26c
> > [ 4.118957] 1dc0: dfa48c00 00000003 df8ce260 dfbf0000 df871e84 df871de0 c0368c20 c02ec014
> > [ 4.144195] 1de0: 22222222 22222222 df871e38 dfbf4388 dfbf4308 df871e38 df871e24 df871e08
> > [ 4.169403] 1e00: 00000000 dfbf4308 dfa48c08 dfbee160 0000006d 00000001 df871e64 df871e28
> > [ 4.194641] 1e20: c01a0bdc c01a0284 df871e4c c00bf518 c00cf7e0 c00cf450 dfa43ec8 00000000
> > [ 4.219848] 1e40: dfa48c08 00000000 dfa48c10 dfbee160 757368a0 00306273 df871e74 dfa48c08
> > [ 4.245086] 1e60: dfa48c08 c06f3c0c dfbee160 c06ea6a0 00000000 00000000 df871e94 df871e88
> > [ 4.270294] 1e80: c02dd8f0 c0368a80 df871ebc df871e98 c02dc254 c02dd8d4 dfa48c08 dfa48c3c
> > [ 4.295532] 1ea0: c06f3c0c dfa48c08 dfa48c3c c06f3c0c df871edc df871ec0 c02dc3f4 c02dc104
> > [ 4.320739] 1ec0: 00000000 c02dc37c c06f3c0c dfbee160 df871f04 df871ee0 c02db7f8 c02dc388
> > [ 4.345977] 1ee0: df89b658 dfa413f0 c027f8a8 c0c5774c c0c57cf8 c06f3c0c df871f14 df871f08
> > [ 4.371215] 1f00: c02dbf34 c02db7ac df871f44 df871f18 c02dafd4 c02dbf18 c05ec331 df871f28
> > [ 4.396423] 1f20: c0c5774c c0c57cf8 c06f3c0c 00000013 00000000 c00282c0 df871f6c df871f48
> > [ 4.421661] 1f40: c02dcad8 c02daf08 c0c5774c c0c57cf8 c006300c 00000013 00000000 00000000
> > [ 4.446868] 1f60: df871f7c df871f70 c02ddde0 c02dca2c df871f9c df871f80 c0028368 c02ddd98
> > [ 4.472106] 1f80: 000000a0 00000060 c00333ac c0008554 df871fdc df871fa0 c00565e8 c00282cc
> > [ 4.497314] 1fa0: 00000000 0000019a c006300c c00e651c df871fdc c00333ac c0008554 c006300c
> > [ 4.522552] 1fc0: 00000013 00000000 00000000 00000000 df871ff4 df871fe0 c00085fc c0056550
> > [ 4.547760] 1fe0: 00000000 c0008554 00000000 df871ff8 c006300c c0008560 c0080000 f3ac400e
> > [ 4.572998] [<c02ec13c>] (omap_usbhs_enable+0x134/0x488) from [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584)
> > [ 4.603332] [<c0368c20>] (ehci_hcd_omap_probe+0x1ac/0x584) from [<c02dd8f0>] (platform_drv_probe+0x28/0x2c)
> > [ 4.633392] [<c02dd8f0>] (platform_drv_probe+0x28/0x2c) from [<c02dc254>] (driver_probe_device+0x15c/0x284)
> > [ 4.663452] [<c02dc254>] (driver_probe_device+0x15c/0x284) from [<c02dc3f4>] (__driver_attach+0x78/0x9c)
> > [ 4.692687] [<c02dc3f4>] (__driver_attach+0x78/0x9c) from [<c02db7f8>] (bus_for_each_dev+0x58/0x8c)
> > [ 4.720611] [<c02db7f8>] (bus_for_each_dev+0x58/0x8c) from [<c02dbf34>] (driver_attach+0x28/0x30)
> > [ 4.747985] [<c02dbf34>] (driver_attach+0x28/0x30) from [<c02dafd4>] (bus_add_driver+0xd8/0x268)
> > [ 4.775085] [<c02dafd4>] (bus_add_driver+0xd8/0x268) from [<c02dcad8>] (driver_register+0xb8/0x140)
> > [ 4.802978] [<c02dcad8>] (driver_register+0xb8/0x140) from [<c02ddde0>] (platform_driver_register+0x54/0x68)
> > [ 4.833343] [<c02ddde0>] (platform_driver_register+0x54/0x68) from [<c0028368>] (ehci_hcd_init+0xa8/0xfc)
> > [ 4.862854] [<c0028368>] (ehci_hcd_init+0xa8/0xfc) from [<c00565e8>] (do_one_initcall+0xa4/0x178)
> > [ 4.890228] [<c00565e8>] (do_one_initcall+0xa4/0x178) from [<c00085fc>] (kernel_init+0xa8/0x15c)
> > [ 4.917327] [<c00085fc>] (kernel_init+0xa8/0x15c) from [<c006300c>] (kernel_thread_exit+0x0/0x8)
> > [ 4.944427] Code: e59f032c e1a01007 e59f233c ebffb0b0 (e5953024)
>
> looks like this is resulting from the missing hwmod conversion in
> mainlnie. Check if reverting 7e6502d577106fb5b202bbaac64c5f1b065e6daa
> helps.
I verified off-list with Luca that reverting that commit does make it
work. Keshava, care to send a revert patch to Sam until we get all the
hwmod stuff in.
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-06-06 11:02 ` Felipe Balbi
@ 2011-06-06 11:05 ` Luciano Coelho
2011-08-09 11:26 ` Luciano Coelho
0 siblings, 1 reply; 24+ messages in thread
From: Luciano Coelho @ 2011-06-06 11:05 UTC (permalink / raw)
To: balbi; +Cc: linux-omap, linux-usb, Keshava Munegowda
On Mon, 2011-06-06 at 14:02 +0300, Felipe Balbi wrote:
> On Mon, Jun 06, 2011 at 01:44:18PM +0300, Felipe Balbi wrote:
> > looks like this is resulting from the missing hwmod conversion in
> > mainlnie. Check if reverting 7e6502d577106fb5b202bbaac64c5f1b065e6daa
> > helps.
>
> I verified off-list with Luca that reverting that commit does make it
> work. Keshava, care to send a revert patch to Sam until we get all the
> hwmod stuff in.
Yes, I confirm that I'm not getting the oops anymore, after reverting
this patch.
Thanks a lot for the quick answer, dude! :)
--
Cheers,
Luca.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-06-06 11:05 ` Luciano Coelho
@ 2011-08-09 11:26 ` Luciano Coelho
2011-08-09 14:47 ` Felipe Balbi
2011-08-11 8:07 ` Ohad Ben-Cohen
0 siblings, 2 replies; 24+ messages in thread
From: Luciano Coelho @ 2011-08-09 11:26 UTC (permalink / raw)
To: balbi, sameo; +Cc: linux-omap, linux-usb, Keshava Munegowda
Hi,
On Mon, 2011-06-06 at 14:05 +0300, Luciano Coelho wrote:
> On Mon, 2011-06-06 at 14:02 +0300, Felipe Balbi wrote:
> > On Mon, Jun 06, 2011 at 01:44:18PM +0300, Felipe Balbi wrote:
> > > looks like this is resulting from the missing hwmod conversion in
> > > mainlnie. Check if reverting 7e6502d577106fb5b202bbaac64c5f1b065e6daa
> > > helps.
> >
> > I verified off-list with Luca that reverting that commit does make it
> > work. Keshava, care to send a revert patch to Sam until we get all the
> > hwmod stuff in.
>
> Yes, I confirm that I'm not getting the oops anymore, after reverting
> this patch.
>
> Thanks a lot for the quick answer, dude! :)
I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
[ 2.054351] usbcore: registered new interface driver cdc_ncm
[ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[ 2.076110] Internal error: : 1406 [#1] SMP
[ 2.080505] Modules linked in:
[ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
[ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
[ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
[ 2.099243] pc : [<c02a8640>] lr : [<c007fea0>] psr: 60000093
[ 2.099243] sp : df871dc8 ip : df871d80 fp : df871dec
[ 2.111328] r10: 80000013 r9 : df9ef9e0 r8 : df9ef9ec
[ 2.116821] r7 : dfa32800 r6 : dfa316f8 r5 : c06f5da8 r4 : dfa316a0
[ 2.123687] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : 00000000
[ 2.130584] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 2.138366] Control: 10c53c7d Table: 8000404a DAC: 00000015
[ 2.144409] Process swapper (pid: 1, stack limit = 0xdf8702f8)
[ 2.150543] Stack: (0xdf871dc8 to 0xdf872000)
[ 2.155120] 1dc0: df105400 dfa32808 df105400 dfa32800 df9ef9ec 00000003
[ 2.163726] 1de0: df871e8c df871df0 c0321d60 c02a8504 df871e2c df10a588 df1075a0 df10a588
[ 2.172363] 1e00: df871e2c df871e10 df10a588 00000000 df10a608 dfa28e88 0000006d fc064c00
[ 2.180969] 1e20: df871e6c df871e30 c015654c c0155c08 c0082098 c0071f74 00000001 dfa32898
[ 2.189575] 1e40: dfa28e88 00000000 dfa32808 dfa32810 00000000 00000000 73757368 00003062
[ 2.198181] 1e60: df871e7c dfa32808 c0716da8 c0716da8 00000000 00000000 00000000 00000000
[ 2.206787] 1e80: df871e9c df871e90 c0298cfc c0321bb8 df871ec4 df871ea0 c0297650 c0298ce4
[ 2.215423] 1ea0: df871ec4 dfa32808 dfa3283c dfa32808 dfa3283c c0716da8 df871ee4 df871ec8
[ 2.224029] 1ec0: c02977ec c0297504 00000000 c0716da8 c0297774 00000000 df871f0c df871ee8
[ 2.232635] 1ee0: c0296c00 c0297780 df891658 dfa31670 c023ac60 c0716da8 df1075a0 c070d6f8
[ 2.241241] 1f00: df871f1c df871f10 c0297334 c0296bb0 df871f4c df871f20 c02963ec c0297318
[ 2.249847] 1f20: c05b84a8 df871f30 c0716da8 c0c7e4c0 c0014ba0 00000000 00000000 00000000
[ 2.258483] 1f40: df871f74 df871f50 c0297f00 c0296320 c0298d44 c0c7df14 c0c7e4c0 c0014ba0
[ 2.267089] 1f60: 00000000 00000000 df871f84 df871f78 c02991e0 c0297e54 df871fa4 df871f88
[ 2.275695] 1f80: c069904c c0299198 000000a0 00000060 c06c4e40 c0698fa4 df871fdc df871fa8
[ 2.284301] 1fa0: c0008854 c0698fb0 c0014ba0 c009960c df871fdc df871fc0 c06c4e40 c06c49dc
[ 2.292907] 1fc0: c0014ba0 00000013 00000000 00000000 df871ff4 df871fe0 c06792d4 c00087b8
[ 2.301513] 1fe0: 00000000 c067924c 00000000 df871ff8 c0014ba0 c0679258 882bf20f 3184000e
[ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
[ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
[ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
[ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
[ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
[ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
[ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
[ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
[ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
[ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
[ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
[ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
[ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
[ 2.437011] Code: e59f0414 e1a01005 e59f2424 ebffac8d (e594303c)
This seems to be very similar (if not identical) to the oops I was
getting before (with 3.0-rc2). I checked the git log and the revert
that fixed my problem with 3.0-rc2 is now included in 3.1-rc1, so it
seems that something else is broken now.
I tried to revert the revert, with the idea that maybe the hwmod changes
were also included in 3.1-rc1, but it didn't help and I'm still getting
a similar oops.
Any clues?
--
Cheers,
Luca.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-08-09 11:26 ` Luciano Coelho
@ 2011-08-09 14:47 ` Felipe Balbi
2011-08-09 15:00 ` Munegowda, Keshava
2011-08-11 8:07 ` Ohad Ben-Cohen
1 sibling, 1 reply; 24+ messages in thread
From: Felipe Balbi @ 2011-08-09 14:47 UTC (permalink / raw)
To: Luciano Coelho
Cc: balbi-l0cyMroinI0, sameo-VuQAYsv1563Yd54FQh9/CA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA, Keshava Munegowda
[-- Attachment #1: Type: text/plain, Size: 5749 bytes --]
Hi,
Keshava this one is for you (sorry for the top-post)
On Tue, Aug 09, 2011 at 02:26:08PM +0300, Luciano Coelho wrote:
> Hi,
>
> On Mon, 2011-06-06 at 14:05 +0300, Luciano Coelho wrote:
> > On Mon, 2011-06-06 at 14:02 +0300, Felipe Balbi wrote:
> > > On Mon, Jun 06, 2011 at 01:44:18PM +0300, Felipe Balbi wrote:
> > > > looks like this is resulting from the missing hwmod conversion in
> > > > mainlnie. Check if reverting 7e6502d577106fb5b202bbaac64c5f1b065e6daa
> > > > helps.
> > >
> > > I verified off-list with Luca that reverting that commit does make it
> > > work. Keshava, care to send a revert patch to Sam until we get all the
> > > hwmod stuff in.
> >
> > Yes, I confirm that I'm not getting the oops anymore, after reverting
> > this patch.
> >
> > Thanks a lot for the quick answer, dude! :)
>
> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
>
> [ 2.054351] usbcore: registered new interface driver cdc_ncm
> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> [ 2.076110] Internal error: : 1406 [#1] SMP
> [ 2.080505] Modules linked in:
> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
> [ 2.099243] pc : [<c02a8640>] lr : [<c007fea0>] psr: 60000093
> [ 2.099243] sp : df871dc8 ip : df871d80 fp : df871dec
> [ 2.111328] r10: 80000013 r9 : df9ef9e0 r8 : df9ef9ec
> [ 2.116821] r7 : dfa32800 r6 : dfa316f8 r5 : c06f5da8 r4 : dfa316a0
> [ 2.123687] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : 00000000
> [ 2.130584] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> [ 2.138366] Control: 10c53c7d Table: 8000404a DAC: 00000015
> [ 2.144409] Process swapper (pid: 1, stack limit = 0xdf8702f8)
> [ 2.150543] Stack: (0xdf871dc8 to 0xdf872000)
> [ 2.155120] 1dc0: df105400 dfa32808 df105400 dfa32800 df9ef9ec 00000003
> [ 2.163726] 1de0: df871e8c df871df0 c0321d60 c02a8504 df871e2c df10a588 df1075a0 df10a588
> [ 2.172363] 1e00: df871e2c df871e10 df10a588 00000000 df10a608 dfa28e88 0000006d fc064c00
> [ 2.180969] 1e20: df871e6c df871e30 c015654c c0155c08 c0082098 c0071f74 00000001 dfa32898
> [ 2.189575] 1e40: dfa28e88 00000000 dfa32808 dfa32810 00000000 00000000 73757368 00003062
> [ 2.198181] 1e60: df871e7c dfa32808 c0716da8 c0716da8 00000000 00000000 00000000 00000000
> [ 2.206787] 1e80: df871e9c df871e90 c0298cfc c0321bb8 df871ec4 df871ea0 c0297650 c0298ce4
> [ 2.215423] 1ea0: df871ec4 dfa32808 dfa3283c dfa32808 dfa3283c c0716da8 df871ee4 df871ec8
> [ 2.224029] 1ec0: c02977ec c0297504 00000000 c0716da8 c0297774 00000000 df871f0c df871ee8
> [ 2.232635] 1ee0: c0296c00 c0297780 df891658 dfa31670 c023ac60 c0716da8 df1075a0 c070d6f8
> [ 2.241241] 1f00: df871f1c df871f10 c0297334 c0296bb0 df871f4c df871f20 c02963ec c0297318
> [ 2.249847] 1f20: c05b84a8 df871f30 c0716da8 c0c7e4c0 c0014ba0 00000000 00000000 00000000
> [ 2.258483] 1f40: df871f74 df871f50 c0297f00 c0296320 c0298d44 c0c7df14 c0c7e4c0 c0014ba0
> [ 2.267089] 1f60: 00000000 00000000 df871f84 df871f78 c02991e0 c0297e54 df871fa4 df871f88
> [ 2.275695] 1f80: c069904c c0299198 000000a0 00000060 c06c4e40 c0698fa4 df871fdc df871fa8
> [ 2.284301] 1fa0: c0008854 c0698fb0 c0014ba0 c009960c df871fdc df871fc0 c06c4e40 c06c49dc
> [ 2.292907] 1fc0: c0014ba0 00000013 00000000 00000000 df871ff4 df871fe0 c06792d4 c00087b8
> [ 2.301513] 1fe0: 00000000 c067924c 00000000 df871ff8 c0014ba0 c0679258 882bf20f 3184000e
> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
> [ 2.437011] Code: e59f0414 e1a01005 e59f2424 ebffac8d (e594303c)
>
> This seems to be very similar (if not identical) to the oops I was
> getting before (with 3.0-rc2). I checked the git log and the revert
> that fixed my problem with 3.0-rc2 is now included in 3.1-rc1, so it
> seems that something else is broken now.
>
> I tried to revert the revert, with the idea that maybe the hwmod changes
> were also included in 3.1-rc1, but it didn't help and I'm still getting
> a similar oops.
>
> Any clues?
>
> --
> Cheers,
> Luca.
>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-08-09 14:47 ` Felipe Balbi
@ 2011-08-09 15:00 ` Munegowda, Keshava
[not found] ` <CAP05o4LyyjXFHyoug1d-CDS_S2VdEgngT-X4iQ8jwbOJ1S42dg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 24+ messages in thread
From: Munegowda, Keshava @ 2011-08-09 15:00 UTC (permalink / raw)
To: balbi; +Cc: Luciano Coelho, sameo, linux-omap, linux-usb
yes! I have started this.
regards
keshava
On Tue, Aug 9, 2011 at 8:17 PM, Felipe Balbi <balbi@ti.com> wrote:
> Hi,
>
> Keshava this one is for you (sorry for the top-post)
>
> On Tue, Aug 09, 2011 at 02:26:08PM +0300, Luciano Coelho wrote:
>> Hi,
>>
>> On Mon, 2011-06-06 at 14:05 +0300, Luciano Coelho wrote:
>> > On Mon, 2011-06-06 at 14:02 +0300, Felipe Balbi wrote:
>> > > On Mon, Jun 06, 2011 at 01:44:18PM +0300, Felipe Balbi wrote:
>> > > > looks like this is resulting from the missing hwmod conversion in
>> > > > mainlnie. Check if reverting 7e6502d577106fb5b202bbaac64c5f1b065e6daa
>> > > > helps.
>> > >
>> > > I verified off-list with Luca that reverting that commit does make it
>> > > work. Keshava, care to send a revert patch to Sam until we get all the
>> > > hwmod stuff in.
>> >
>> > Yes, I confirm that I'm not getting the oops anymore, after reverting
>> > this patch.
>> >
>> > Thanks a lot for the quick answer, dude! :)
>>
>> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
>>
>> [ 2.054351] usbcore: registered new interface driver cdc_ncm
>> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
>> [ 2.076110] Internal error: : 1406 [#1] SMP
>> [ 2.080505] Modules linked in:
>> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
>> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
>> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
>> [ 2.099243] pc : [<c02a8640>] lr : [<c007fea0>] psr: 60000093
>> [ 2.099243] sp : df871dc8 ip : df871d80 fp : df871dec
>> [ 2.111328] r10: 80000013 r9 : df9ef9e0 r8 : df9ef9ec
>> [ 2.116821] r7 : dfa32800 r6 : dfa316f8 r5 : c06f5da8 r4 : dfa316a0
>> [ 2.123687] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : 00000000
>> [ 2.130584] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
>> [ 2.138366] Control: 10c53c7d Table: 8000404a DAC: 00000015
>> [ 2.144409] Process swapper (pid: 1, stack limit = 0xdf8702f8)
>> [ 2.150543] Stack: (0xdf871dc8 to 0xdf872000)
>> [ 2.155120] 1dc0: df105400 dfa32808 df105400 dfa32800 df9ef9ec 00000003
>> [ 2.163726] 1de0: df871e8c df871df0 c0321d60 c02a8504 df871e2c df10a588 df1075a0 df10a588
>> [ 2.172363] 1e00: df871e2c df871e10 df10a588 00000000 df10a608 dfa28e88 0000006d fc064c00
>> [ 2.180969] 1e20: df871e6c df871e30 c015654c c0155c08 c0082098 c0071f74 00000001 dfa32898
>> [ 2.189575] 1e40: dfa28e88 00000000 dfa32808 dfa32810 00000000 00000000 73757368 00003062
>> [ 2.198181] 1e60: df871e7c dfa32808 c0716da8 c0716da8 00000000 00000000 00000000 00000000
>> [ 2.206787] 1e80: df871e9c df871e90 c0298cfc c0321bb8 df871ec4 df871ea0 c0297650 c0298ce4
>> [ 2.215423] 1ea0: df871ec4 dfa32808 dfa3283c dfa32808 dfa3283c c0716da8 df871ee4 df871ec8
>> [ 2.224029] 1ec0: c02977ec c0297504 00000000 c0716da8 c0297774 00000000 df871f0c df871ee8
>> [ 2.232635] 1ee0: c0296c00 c0297780 df891658 dfa31670 c023ac60 c0716da8 df1075a0 c070d6f8
>> [ 2.241241] 1f00: df871f1c df871f10 c0297334 c0296bb0 df871f4c df871f20 c02963ec c0297318
>> [ 2.249847] 1f20: c05b84a8 df871f30 c0716da8 c0c7e4c0 c0014ba0 00000000 00000000 00000000
>> [ 2.258483] 1f40: df871f74 df871f50 c0297f00 c0296320 c0298d44 c0c7df14 c0c7e4c0 c0014ba0
>> [ 2.267089] 1f60: 00000000 00000000 df871f84 df871f78 c02991e0 c0297e54 df871fa4 df871f88
>> [ 2.275695] 1f80: c069904c c0299198 000000a0 00000060 c06c4e40 c0698fa4 df871fdc df871fa8
>> [ 2.284301] 1fa0: c0008854 c0698fb0 c0014ba0 c009960c df871fdc df871fc0 c06c4e40 c06c49dc
>> [ 2.292907] 1fc0: c0014ba0 00000013 00000000 00000000 df871ff4 df871fe0 c06792d4 c00087b8
>> [ 2.301513] 1fe0: 00000000 c067924c 00000000 df871ff8 c0014ba0 c0679258 882bf20f 3184000e
>> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
>> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
>> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
>> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
>> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
>> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
>> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
>> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
>> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
>> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
>> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
>> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
>> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
>> [ 2.437011] Code: e59f0414 e1a01005 e59f2424 ebffac8d (e594303c)
>>
>> This seems to be very similar (if not identical) to the oops I was
>> getting before (with 3.0-rc2). I checked the git log and the revert
>> that fixed my problem with 3.0-rc2 is now included in 3.1-rc1, so it
>> seems that something else is broken now.
>>
>> I tried to revert the revert, with the idea that maybe the hwmod changes
>> were also included in 3.1-rc1, but it didn't help and I'm still getting
>> a similar oops.
>>
>> Any clues?
>>
>> --
>> Cheers,
>> Luca.
>>
>
> --
> balbi
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
[not found] ` <CAP05o4LyyjXFHyoug1d-CDS_S2VdEgngT-X4iQ8jwbOJ1S42dg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2011-08-09 16:49 ` Munegowda, Keshava
2011-08-09 18:00 ` Luciano Coelho
0 siblings, 1 reply; 24+ messages in thread
From: Munegowda, Keshava @ 2011-08-09 16:49 UTC (permalink / raw)
To: balbi-l0cyMroinI0
Cc: Luciano Coelho, sameo-VuQAYsv1563Yd54FQh9/CA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA
On Tue, Aug 9, 2011 at 8:30 PM, Munegowda, Keshava
<keshava_mgowda-l0cyMroinI0@public.gmane.org> wrote:
> yes! I have started this.
>
> regards
> keshava
>
>
> On Tue, Aug 9, 2011 at 8:17 PM, Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> wrote:
>> Hi,
>>
>> Keshava this one is for you (sorry for the top-post)
>>
>> On Tue, Aug 09, 2011 at 02:26:08PM +0300, Luciano Coelho wrote:
>>> Hi,
>>>
>>> On Mon, 2011-06-06 at 14:05 +0300, Luciano Coelho wrote:
>>> > On Mon, 2011-06-06 at 14:02 +0300, Felipe Balbi wrote:
>>> > > On Mon, Jun 06, 2011 at 01:44:18PM +0300, Felipe Balbi wrote:
>>> > > > looks like this is resulting from the missing hwmod conversion in
>>> > > > mainlnie. Check if reverting 7e6502d577106fb5b202bbaac64c5f1b065e6daa
>>> > > > helps.
>>> > >
>>> > > I verified off-list with Luca that reverting that commit does make it
>>> > > work. Keshava, care to send a revert patch to Sam until we get all the
>>> > > hwmod stuff in.
>>> >
>>> > Yes, I confirm that I'm not getting the oops anymore, after reverting
>>> > this patch.
>>> >
>>> > Thanks a lot for the quick answer, dude! :)
>>>
>>> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
>>>
>>> [ 2.054351] usbcore: registered new interface driver cdc_ncm
>>> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>>> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
>>> [ 2.076110] Internal error: : 1406 [#1] SMP
>>> [ 2.080505] Modules linked in:
>>> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
>>> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
>>> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
>>> [ 2.099243] pc : [<c02a8640>] lr : [<c007fea0>] psr: 60000093
>>> [ 2.099243] sp : df871dc8 ip : df871d80 fp : df871dec
>>> [ 2.111328] r10: 80000013 r9 : df9ef9e0 r8 : df9ef9ec
>>> [ 2.116821] r7 : dfa32800 r6 : dfa316f8 r5 : c06f5da8 r4 : dfa316a0
>>> [ 2.123687] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : 00000000
>>> [ 2.130584] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
>>> [ 2.138366] Control: 10c53c7d Table: 8000404a DAC: 00000015
>>> [ 2.144409] Process swapper (pid: 1, stack limit = 0xdf8702f8)
>>> [ 2.150543] Stack: (0xdf871dc8 to 0xdf872000)
>>> [ 2.155120] 1dc0: df105400 dfa32808 df105400 dfa32800 df9ef9ec 00000003
>>> [ 2.163726] 1de0: df871e8c df871df0 c0321d60 c02a8504 df871e2c df10a588 df1075a0 df10a588
>>> [ 2.172363] 1e00: df871e2c df871e10 df10a588 00000000 df10a608 dfa28e88 0000006d fc064c00
>>> [ 2.180969] 1e20: df871e6c df871e30 c015654c c0155c08 c0082098 c0071f74 00000001 dfa32898
>>> [ 2.189575] 1e40: dfa28e88 00000000 dfa32808 dfa32810 00000000 00000000 73757368 00003062
>>> [ 2.198181] 1e60: df871e7c dfa32808 c0716da8 c0716da8 00000000 00000000 00000000 00000000
>>> [ 2.206787] 1e80: df871e9c df871e90 c0298cfc c0321bb8 df871ec4 df871ea0 c0297650 c0298ce4
>>> [ 2.215423] 1ea0: df871ec4 dfa32808 dfa3283c dfa32808 dfa3283c c0716da8 df871ee4 df871ec8
>>> [ 2.224029] 1ec0: c02977ec c0297504 00000000 c0716da8 c0297774 00000000 df871f0c df871ee8
>>> [ 2.232635] 1ee0: c0296c00 c0297780 df891658 dfa31670 c023ac60 c0716da8 df1075a0 c070d6f8
>>> [ 2.241241] 1f00: df871f1c df871f10 c0297334 c0296bb0 df871f4c df871f20 c02963ec c0297318
>>> [ 2.249847] 1f20: c05b84a8 df871f30 c0716da8 c0c7e4c0 c0014ba0 00000000 00000000 00000000
>>> [ 2.258483] 1f40: df871f74 df871f50 c0297f00 c0296320 c0298d44 c0c7df14 c0c7e4c0 c0014ba0
>>> [ 2.267089] 1f60: 00000000 00000000 df871f84 df871f78 c02991e0 c0297e54 df871fa4 df871f88
>>> [ 2.275695] 1f80: c069904c c0299198 000000a0 00000060 c06c4e40 c0698fa4 df871fdc df871fa8
>>> [ 2.284301] 1fa0: c0008854 c0698fb0 c0014ba0 c009960c df871fdc df871fc0 c06c4e40 c06c49dc
>>> [ 2.292907] 1fc0: c0014ba0 00000013 00000000 00000000 df871ff4 df871fe0 c06792d4 c00087b8
>>> [ 2.301513] 1fe0: 00000000 c067924c 00000000 df871ff8 c0014ba0 c0679258 882bf20f 3184000e
>>> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
>>> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
>>> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
>>> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
>>> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
>>> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
>>> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
>>> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
>>> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
>>> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
>>> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
>>> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
>>> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
>>> [ 2.437011] Code: e59f0414 e1a01005 e59f2424 ebffac8d (e594303c)
>>>
>>> This seems to be very similar (if not identical) to the oops I was
>>> getting before (with 3.0-rc2). I checked the git log and the revert
>>> that fixed my problem with 3.0-rc2 is now included in 3.1-rc1, so it
>>> seems that something else is broken now.
>>>
>>> I tried to revert the revert, with the idea that maybe the hwmod changes
>>> were also included in 3.1-rc1, but it didn't help and I'm still getting
>>> a similar oops.
>>>
>>> Any clues?
>>>
>>> --
>>> Cheers,
>>> Luca.
>>>
>>
>> --
>> balbi
>>
I not seeing this issue in 4430 sdp with 3.1-rc1( but there are random
oops not because of usbhs).
I will try the same thing in omap4 panda and update.
keshava
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-08-09 16:49 ` Munegowda, Keshava
@ 2011-08-09 18:00 ` Luciano Coelho
0 siblings, 0 replies; 24+ messages in thread
From: Luciano Coelho @ 2011-08-09 18:00 UTC (permalink / raw)
To: Munegowda, Keshava; +Cc: balbi, sameo, linux-omap, linux-usb
[-- Attachment #1: Type: text/plain, Size: 674 bytes --]
On Tue, 2011-08-09 at 22:19 +0530, Munegowda, Keshava wrote:
> I not seeing this issue in 4430 sdp with 3.1-rc1( but there are random
> oops not because of usbhs).
> I will try the same thing in omap4 panda and update.
I have removed ehci_hcd from my kernel configuration and the problem
disappeared completely from my panda. I didn't observe any other oopses
without ehci_hcd.
Actually, I tried to re-enable EHCI_HCD and couldn't reproduce the
problem. I guess it was some specific options I had in my old .config.
I have attached the .config that causes the EHCI_HCD oops on my panda.
I hope this helps. Let me know if you need any extra info.
--
Cheers,
Luca.
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 64550 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.1.0-rc1 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_SCHED_CLOCK=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_KTIME_SCALAR=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_PRIMA2 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS4 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_TCC_926 is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_VT8500 is not set
# CONFIG_ARCH_ZYNQ is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
#
# TI OMAP Common Features
#
# CONFIG_ARCH_OMAP1 is not set
CONFIG_ARCH_OMAP2PLUS=y
#
# OMAP Feature Selections
#
# CONFIG_OMAP_SMARTREFLEX is not set
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
# CONFIG_ARCH_OMAP2 is not set
# CONFIG_ARCH_OMAP3 is not set
CONFIG_ARCH_OMAP4=y
CONFIG_OMAP_PACKAGE_CBL=y
CONFIG_OMAP_PACKAGE_CBS=y
#
# OMAP Board Type
#
CONFIG_MACH_OMAP_4430SDP=y
CONFIG_MACH_OMAP4_PANDA=y
#
# System MMU
#
#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_CACHE_L2X0=y
CONFIG_CACHE_PL310=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
# CONFIG_ARM_ERRATA_742230 is not set
# CONFIG_ARM_ERRATA_742231 is not set
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_ERRATA_720789=y
CONFIG_PL310_ERRATA_727915=y
# CONFIG_ARM_ERRATA_743622 is not set
# CONFIG_ARM_ERRATA_751472 is not set
# CONFIG_ARM_ERRATA_753970 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_754327 is not set
CONFIG_ARM_GIC=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
#
# PC-card bridges
#
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_TWD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
CONFIG_LOCAL_TIMERS=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ=128
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_LEDS=y
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
#
# Boot options
#
# CONFIG_USE_OF is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# ARM CPU frequency scaling drivers
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_HAS_OPP=y
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_NOINLINE is not set
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_TKIP_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
# CONFIG_MAC80211_DEBUG_COUNTERS is not set
CONFIG_MAC80211_DRIVER_API_TRACER=y
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_MII=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
CONFIG_WL12XX_MENU=m
CONFIG_WL12XX=m
# CONFIG_WL12XX_HT is not set
CONFIG_WL12XX_SPI=m
CONFIG_WL12XX_SDIO=m
# CONFIG_WL12XX_SDIO_TEST is not set
CONFIG_WL12XX_PLATFORM_DATA=y
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
# CONFIG_USB_NET_KALMIA is not set
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
# CONFIG_USB_VL600 is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_CORE is not set
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MPCORE_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
CONFIG_TWL4030_POWER=y
# CONFIG_MFD_TWL4030_AUDIO is not set
# CONFIG_TWL6030_PWM is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_OMAP_USB_HOST=y
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_OMAP2_DSS is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
CONFIG_SND_SOC=m
# CONFIG_SND_SOC_CACHE_LZO is not set
CONFIG_SND_OMAP_SOC=m
# CONFIG_SND_OMAP_SOC_SDP4430 is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_HCD_OMAP=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_OMAP3=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_HWA_HCD=m
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_TUSB6010 is not set
CONFIG_USB_MUSB_OMAP2PLUS=y
# CONFIG_USB_MUSB_AM35X is not set
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_UX500_DMA is not set
CONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TI_CPPI_DMA is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_OMAP is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
CONFIG_TWL4030_USB=y
CONFIG_TWL6030_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=m
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
# CONFIG_HWSPINLOCK is not set
CONFIG_CLKSRC_MMIO=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_VIRT_DRIVERS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
CONFIG_OLD_MCOUNT=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_OC_ETM is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-08-09 11:26 ` Luciano Coelho
2011-08-09 14:47 ` Felipe Balbi
@ 2011-08-11 8:07 ` Ohad Ben-Cohen
[not found] ` <CAK=WgbatbaSj=U7+SAva4Woh7uaOoCzQck5yjfLvVGLR-UCVHg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
` (2 more replies)
1 sibling, 3 replies; 24+ messages in thread
From: Ohad Ben-Cohen @ 2011-08-11 8:07 UTC (permalink / raw)
To: Luciano Coelho, Paul Walmsley, Cousson, Benoit, Rajendra Nayak
Cc: balbi, sameo, linux-omap, linux-usb, Keshava Munegowda, Kevin Hilman
+ Paul, Benoit, Rajendra
On Tue, Aug 9, 2011 at 2:26 PM, Luciano Coelho <coelho@ti.com> wrote:
> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
>
> [ 2.054351] usbcore: registered new interface driver cdc_ncm
> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> [ 2.076110] Internal error: : 1406 [#1] SMP
> [ 2.080505] Modules linked in:
> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
...
> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
I get this too.
> Any clues?
Reverting 665d001338b494d6d62810aa99b4c0fa1a0884b9 "OMAP2+: hwmod:
Follow the recommended PRCM module enable sequence" fixes this for me.
More specifically, this hunk alone seems to do the trick:
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44x
index 2af0e3f..12d22a8 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3379,7 +3379,6 @@ int __init omap4xxx_clk_init(void)
}
clk_init(&omap2_clk_functions);
- omap2_clk_disable_clkdm_control();
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
I'm not suggesting this is anyway near a real fix, but hopefully it
will help pin-point the problem (clock44xx_data.c changes ?).
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
[not found] ` <CAK=WgbatbaSj=U7+SAva4Woh7uaOoCzQck5yjfLvVGLR-UCVHg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2011-08-11 8:19 ` Luciano Coelho
0 siblings, 0 replies; 24+ messages in thread
From: Luciano Coelho @ 2011-08-11 8:19 UTC (permalink / raw)
To: Ohad Ben-Cohen
Cc: Paul Walmsley, Cousson, Benoit, Rajendra Nayak,
balbi-l0cyMroinI0, sameo-VuQAYsv1563Yd54FQh9/CA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA, Keshava Munegowda,
Kevin Hilman
On Thu, 2011-08-11 at 11:07 +0300, Ohad Ben-Cohen wrote:
> > Any clues?
>
> Reverting 665d001338b494d6d62810aa99b4c0fa1a0884b9 "OMAP2+: hwmod:
> Follow the recommended PRCM module enable sequence" fixes this for me.
>
> More specifically, this hunk alone seems to do the trick:
>
> diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44x
> index 2af0e3f..12d22a8 100644
> --- a/arch/arm/mach-omap2/clock44xx_data.c
> +++ b/arch/arm/mach-omap2/clock44xx_data.c
> @@ -3379,7 +3379,6 @@ int __init omap4xxx_clk_init(void)
> }
>
> clk_init(&omap2_clk_functions);
> - omap2_clk_disable_clkdm_control();
>
> for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
> c++)
>
> I'm not suggesting this is anyway near a real fix, but hopefully it
> will help pin-point the problem (clock44xx_data.c changes ?).
This solves (or works around?) the problem for me too. Thanks, Ohad!
--
Cheers,
Luca.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-08-11 8:07 ` Ohad Ben-Cohen
[not found] ` <CAK=WgbatbaSj=U7+SAva4Woh7uaOoCzQck5yjfLvVGLR-UCVHg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2011-08-11 8:21 ` Munegowda, Keshava
2011-08-11 12:03 ` Rajendra Nayak
2011-08-11 11:59 ` Rajendra Nayak
2 siblings, 1 reply; 24+ messages in thread
From: Munegowda, Keshava @ 2011-08-11 8:21 UTC (permalink / raw)
To: Ohad Ben-Cohen
Cc: Luciano Coelho, Paul Walmsley, Cousson, Benoit, Rajendra Nayak,
balbi, sameo, linux-omap, linux-usb, Kevin Hilman
On Thu, Aug 11, 2011 at 1:37 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
> + Paul, Benoit, Rajendra
>
> On Tue, Aug 9, 2011 at 2:26 PM, Luciano Coelho <coelho@ti.com> wrote:
>> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
>>
>> [ 2.054351] usbcore: registered new interface driver cdc_ncm
>> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
>> [ 2.076110] Internal error: : 1406 [#1] SMP
>> [ 2.080505] Modules linked in:
>> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
>> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
>> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
> ...
>> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
>> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
>> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
>> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
>> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
>> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
>> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
>> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
>> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
>> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
>> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
>> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
>> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
>
> I get this too.
>
>> Any clues?
>
> Reverting 665d001338b494d6d62810aa99b4c0fa1a0884b9 "OMAP2+: hwmod:
> Follow the recommended PRCM module enable sequence" fixes this for me.
>
> More specifically, this hunk alone seems to do the trick:
>
> diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44x
> index 2af0e3f..12d22a8 100644
> --- a/arch/arm/mach-omap2/clock44xx_data.c
> +++ b/arch/arm/mach-omap2/clock44xx_data.c
> @@ -3379,7 +3379,6 @@ int __init omap4xxx_clk_init(void)
> }
>
> clk_init(&omap2_clk_functions);
> - omap2_clk_disable_clkdm_control();
>
> for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
> c++)
>
> I'm not suggesting this is anyway near a real fix, but hopefully it
> will help pin-point the problem (clock44xx_data.c changes ?).
Even I am seeing same and bit similar crash in omap4 sdp
[ 36.922027] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 36.931243] CUSTOM SRESP error with SOURCE:L4CFG
[ 36.936096] Modules linked in: ehci_hcd(+)
[ 36.940399] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 36.950256] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 36.960327] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 36.970550] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 36.981445] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 36.991760] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 37.001617] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 37.011627] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 37.020843] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 37.029327] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 37.038085] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 37.046661] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 37.055328] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 37.064178] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 37.069488] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 37.078063] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 37.086639] 9fa0: 20000013 ffffffff
[ 37.090301] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 37.098999] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 37.107574] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 37.116333] ---[ end trace 52da08271889a1a6 ]---
[ 37.121215] ------------[ cut here ]------------
[ 37.126068] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 37.135284] CUSTOM SRESP error with SOURCE:L4CFG
[ 37.140136] Modules linked in: ehci_hcd(+)
[ 37.144439] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 37.154296] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 37.164337] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 37.174530] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 37.185394] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 37.195709] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 37.205535] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 37.215576] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 37.224822] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 37.233306] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 37.242034] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 37.250610] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 37.259246] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 37.268096] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 37.273406] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 37.281982] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 37.290557] 9fa0: 20000013 ffffffff
[ 37.294219] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 37.302856] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 37.311431] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 37.320220] ---[ end trace 52da08271889a1a7 ]---
[ 37.325042] ------------[ cut here ]------------
[ 37.329895] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 37.339080] CUSTOM SRESP error with SOURCE:L4CFG
[ 37.343933] Modules linked in: ehci_hcd(+)
[ 37.348236] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 37.358093] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 37.368194] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 37.378417] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 37.389312] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 37.399627] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 37.409484] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 37.419555] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 37.428771] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 37.437286] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 37.446075] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 37.454650] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 37.463348] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 37.472229] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 37.477539] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 37.486145] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 37.494720] 9fa0: 20000013 ffffffff
[ 37.498413] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 37.507080] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 37.515686] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 37.524444] ---[ end trace 52da08271889a1a8 ]---
[ 37.529296] ------------[ cut here ]------------
[ 37.534149] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 37.543365] CUSTOM SRESP error with SOURCE:L4CFG
[ 37.548217] Modules linked in: ehci_hcd(+)
[ 37.552551] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 37.562408] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 37.572479] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 37.582733] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 37.593597] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 37.603942] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 37.613800] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 37.623870] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 37.633117] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 37.641632] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 37.650390] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 37.658996] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 37.667694] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 37.676544] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 37.681854] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 37.690460] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 37.699035] 9fa0: 20000013 ffffffff
[ 37.702697] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 37.711395] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 37.720001] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 37.728759] ---[ end trace 52da08271889a1a9 ]---
[ 37.733642] ------------[ cut here ]------------
[ 37.738464] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 37.747711] CUSTOM SRESP error with SOURCE:L4CFG
[ 37.752563] Modules linked in: ehci_hcd(+)
[ 37.756866] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 37.766723] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 37.776794] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 37.787048] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 37.797912] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 37.808258] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 37.818145] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 37.828216] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 37.837463] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 37.845977] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 37.854766] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 37.863342] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 37.872039] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 37.880920] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 37.886230] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 37.894836] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 37.903411] 9fa0: 20000013 ffffffff
[ 37.907104] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 37.915802] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 37.924377] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 37.933166] ---[ end trace 52da08271889a1aa ]---
[ 37.938049] ------------[ cut here ]------------
[ 37.942901] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 37.952117] CUSTOM SRESP error with SOURCE:L4CFG
[ 37.956970] Modules linked in: ehci_hcd(+)
[ 37.961303] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 37.971191] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 37.981262] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 37.991516] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 38.002410] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 38.012725] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 38.022613] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 38.032684] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 38.041931] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 38.050445] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 38.059234] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 38.067810] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 38.076507] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 38.085388] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 38.090698] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 38.099304] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 38.107910] 9fa0: 20000013 ffffffff
[ 38.111572] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 38.120239] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 38.128845] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 38.137603] ---[ end trace 52da08271889a1ab ]---
[ 38.142486] ------------[ cut here ]------------
[ 38.147338] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 38.156555] CUSTOM SRESP error with SOURCE:L4CFG
[ 38.161376] Modules linked in: ehci_hcd(+)
[ 38.165710] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 38.175598] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 38.185638] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 38.195861] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 38.206756] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 38.217102] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 38.226989] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 38.237030] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 38.246276] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 38.254760] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 38.263519] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 38.272125] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 38.280822] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 38.289672] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 38.294952] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 38.303558] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 38.312133] 9fa0: 20000013 ffffffff
[ 38.315795] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 38.324462] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 38.333038] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 38.341796] ---[ end trace 52da08271889a1ac ]---
[ 38.346679] ------------[ cut here ]------------
[ 38.351531] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 38.360748] CUSTOM SRESP error with SOURCE:L4CFG
[ 38.365570] Modules linked in: ehci_hcd(+)
[ 38.369873] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 38.379760] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 38.389831] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 38.400085] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 38.410949] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 38.421295] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 38.431182] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 38.441223] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 38.450439] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 38.458953] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 38.467742] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 38.476348] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 38.485046] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 38.493896] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 38.499206] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 38.507751] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 38.516326] 9fa0: 20000013 ffffffff
[ 38.519989] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 38.528686] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 38.537261] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 38.546051] ---[ end trace 52da08271889a1ad ]---
[ 38.550903] ------------[ cut here ]------------
[ 38.555755] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 38.565002] CUSTOM SRESP error with SOURCE:L4CFG
[ 38.569854] Modules linked in: ehci_hcd(+)
[ 38.574157] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 38.584045] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 38.594116] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 38.604370] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 38.615234] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 38.625579] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 38.635467] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 38.645538] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 38.654785] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 38.663269] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 38.672058] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 38.680664] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 38.689331] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 38.698211] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 38.703521] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 38.712127] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 38.720733] 9fa0: 20000013 ffffffff
[ 38.724426] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 38.733123] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 38.741729] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 38.750488] ---[ end trace 52da08271889a1ae ]---
[ 38.755340] ------------[ cut here ]------------
[ 38.760192] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 38.769439] CUSTOM SRESP error with SOURCE:L4CFG
[ 38.774261] Modules linked in: ehci_hcd(+)
[ 38.778594] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 38.788482] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 38.798553] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 38.808776] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 38.819671] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 38.830017] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 38.839904] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 38.849945] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 38.859161] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 38.867675] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 38.876434] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 38.885009] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 38.893707] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 38.902526] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 38.907836] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 38.916412] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 38.924987] 9fa0: 20000013 ffffffff
[ 38.928649] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 38.937347] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 38.945953] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 38.954711] ---[ end trace 52da08271889a1af ]---
[ 38.959564] ------------[ cut here ]------------
[ 38.964416] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 38.973632] CUSTOM SRESP error with SOURCE:L4CFG
[ 38.978454] Modules linked in: ehci_hcd(+)
[ 38.982757] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 38.992645] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 39.002716] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 39.012969] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 39.023864] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 39.034179] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 39.044067] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 39.054107] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 39.063323] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 39.071838] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 39.080627] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 39.089233] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 39.097930] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 39.106781] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 39.112121] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 39.120727] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 39.129333] 9fa0: 20000013 ffffffff
[ 39.132995] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 39.141662] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
[ 39.150268] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
(start_kernel+0x270/0x 300)
[ 39.159057] ---[ end trace 52da08271889a1b0 ]---
[ 39.163909] ------------[ cut here ]------------
[ 39.168792] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
l3_interrupt_handler+0x14 4/0x170()
[ 39.178009] CUSTOM SRESP error with SOURCE:L4CFG
[ 39.182861] Modules linked in: ehci_hcd(+)
[ 39.187194] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
[<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
[ 39.197052] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
[<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
[ 39.207122] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
[<c0030318>] (l3_interrupt_ handler+0x144/0x170)
[ 39.217346] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
[<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
[ 39.228240] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
[<c0097c7c>] (handle _irq_event+0x3c/0x5c)
[ 39.238586] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
[<c009a288>] (handle_fasteoi _irq+0x98/0x110)
[ 39.248474] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
[<c0097624>] (generic_han dle_irq+0x38/0x48)
[ 39.258544] [<c0097624>] (generic_handle_irq+0x38/0x48) from
[<c0014c88>] (handle_IRQ+0 x4c/0xac)
[ 39.267791] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
(__irq_svc+0x3c/0x100 )
[ 39.276306] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
(__do_softirq+0x64/0x 21c)
[ 39.285095] [<c0055d70>] (__do_softirq+0x64/0x21c) from
[<c0056124>] (irq_exit+0x90/0xa c)
[ 39.293701] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
(do_local_timer+0x58/0x 74)
[ 39.302398] [<c0008474>] (do_local_timer+0x58/0x74) from
[<c041b89c>] (__irq_svc+0x3c/0 x100)
[ 39.311248] Exception stack(0xc0609f60 to 0xc0609fa8)
[ 39.316589] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
c068be24 c061d96c 000000 00
[ 39.325195] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
c0609fa8 c008569c c0014e 00
[ 39.333801] 9fa0: 20000013 ffffffff
[ 39.337463] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
(default_idle+0x30/0x 38)
[ 39.346160] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
(cpu_idle+0xc0/0x10 4)
it's crashing l3 cache; its occurrence is very random and rare in omap4 sdp.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-08-11 8:07 ` Ohad Ben-Cohen
[not found] ` <CAK=WgbatbaSj=U7+SAva4Woh7uaOoCzQck5yjfLvVGLR-UCVHg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-11 8:21 ` Munegowda, Keshava
@ 2011-08-11 11:59 ` Rajendra Nayak
[not found] ` <4E43C41E.1080808-l0cyMroinI0@public.gmane.org>
2 siblings, 1 reply; 24+ messages in thread
From: Rajendra Nayak @ 2011-08-11 11:59 UTC (permalink / raw)
To: Ohad Ben-Cohen
Cc: Luciano Coelho, Paul Walmsley, Cousson, Benoit, balbi, sameo,
linux-omap, linux-usb, Keshava Munegowda, Kevin Hilman
On 8/11/2011 1:37 PM, Ohad Ben-Cohen wrote:
> + Paul, Benoit, Rajendra
>
> On Tue, Aug 9, 2011 at 2:26 PM, Luciano Coelho<coelho@ti.com> wrote:
>> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
>>
>> [ 2.054351] usbcore: registered new interface driver cdc_ncm
>> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
>> [ 2.076110] Internal error: : 1406 [#1] SMP
>> [ 2.080505] Modules linked in:
>> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
>> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
>> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
> ...
>> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
>> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
>> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
>> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
>> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
>> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
>> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
>> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
>> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
>> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
>> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
>> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
>> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
>
> I get this too.
>
>> Any clues?
Its quite expected as omap_usbhs_enable() still relies on clock
framework to enable the clocks.
Any driver still using clock framework on OMAP4 to enable "main" clocks
is expected to be broken. The only way to fix this is to adapt
the driver to runtime PM.
>
> Reverting 665d001338b494d6d62810aa99b4c0fa1a0884b9 "OMAP2+: hwmod:
> Follow the recommended PRCM module enable sequence" fixes this for me.
>
> More specifically, this hunk alone seems to do the trick:
>
> diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44x
> index 2af0e3f..12d22a8 100644
> --- a/arch/arm/mach-omap2/clock44xx_data.c
> +++ b/arch/arm/mach-omap2/clock44xx_data.c
> @@ -3379,7 +3379,6 @@ int __init omap4xxx_clk_init(void)
> }
>
> clk_init(&omap2_clk_functions);
> - omap2_clk_disable_clkdm_control();
>
> for (c = omap44xx_clks; c< omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
> c++)
>
> I'm not suggesting this is anyway near a real fix, but hopefully it
> will help pin-point the problem (clock44xx_data.c changes ?).
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-08-11 8:21 ` Munegowda, Keshava
@ 2011-08-11 12:03 ` Rajendra Nayak
0 siblings, 0 replies; 24+ messages in thread
From: Rajendra Nayak @ 2011-08-11 12:03 UTC (permalink / raw)
To: Munegowda, Keshava
Cc: Ohad Ben-Cohen, Luciano Coelho, Paul Walmsley, Cousson, Benoit,
balbi, sameo, linux-omap, linux-usb, Kevin Hilman
On 8/11/2011 1:51 PM, Munegowda, Keshava wrote:
> On Thu, Aug 11, 2011 at 1:37 PM, Ohad Ben-Cohen<ohad@wizery.com> wrote:
>> + Paul, Benoit, Rajendra
>>
>> On Tue, Aug 9, 2011 at 2:26 PM, Luciano Coelho<coelho@ti.com> wrote:
>>> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
>>>
>>> [ 2.054351] usbcore: registered new interface driver cdc_ncm
>>> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>>> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
>>> [ 2.076110] Internal error: : 1406 [#1] SMP
>>> [ 2.080505] Modules linked in:
>>> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
>>> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
>>> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
>> ...
>>> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
>>> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
>>> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
>>> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
>>> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
>>> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
>>> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
>>> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
>>> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
>>> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
>>> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
>>> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
>>> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
>>
>> I get this too.
>>
>>> Any clues?
>>
>> Reverting 665d001338b494d6d62810aa99b4c0fa1a0884b9 "OMAP2+: hwmod:
>> Follow the recommended PRCM module enable sequence" fixes this for me.
>>
>> More specifically, this hunk alone seems to do the trick:
>>
>> diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44x
>> index 2af0e3f..12d22a8 100644
>> --- a/arch/arm/mach-omap2/clock44xx_data.c
>> +++ b/arch/arm/mach-omap2/clock44xx_data.c
>> @@ -3379,7 +3379,6 @@ int __init omap4xxx_clk_init(void)
>> }
>>
>> clk_init(&omap2_clk_functions);
>> - omap2_clk_disable_clkdm_control();
>>
>> for (c = omap44xx_clks; c< omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
>> c++)
>>
>> I'm not suggesting this is anyway near a real fix, but hopefully it
>> will help pin-point the problem (clock44xx_data.c changes ?).
>
>
>
>
> Even I am seeing same and bit similar crash in omap4 sdp
All of these are symptoms of your driver accessing registers
while the module is not fully enabled. This is because clock
framework on OMAP4, neither puts the respective clockdomains
in right state before enabling the clocks, nor does it wait
on IDLEST bits to make sure the module is completely accessible.
All of this is moved into higher level hwmod/omap_device frameworks,
and hence a runtime PM conversion of your driver should fix all these
issues.
>
> [ 36.922027] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 36.931243] CUSTOM SRESP error with SOURCE:L4CFG
> [ 36.936096] Modules linked in: ehci_hcd(+)
> [ 36.940399] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 36.950256] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 36.960327] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 36.970550] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 36.981445] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 36.991760] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 37.001617] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 37.011627] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 37.020843] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 37.029327] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 37.038085] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 37.046661] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 37.055328] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 37.064178] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 37.069488] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 37.078063] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 37.086639] 9fa0: 20000013 ffffffff
> [ 37.090301] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 37.098999] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 37.107574] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 37.116333] ---[ end trace 52da08271889a1a6 ]---
> [ 37.121215] ------------[ cut here ]------------
> [ 37.126068] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 37.135284] CUSTOM SRESP error with SOURCE:L4CFG
> [ 37.140136] Modules linked in: ehci_hcd(+)
> [ 37.144439] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 37.154296] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 37.164337] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 37.174530] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 37.185394] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 37.195709] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 37.205535] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 37.215576] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 37.224822] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 37.233306] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 37.242034] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 37.250610] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 37.259246] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 37.268096] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 37.273406] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 37.281982] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 37.290557] 9fa0: 20000013 ffffffff
> [ 37.294219] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 37.302856] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 37.311431] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 37.320220] ---[ end trace 52da08271889a1a7 ]---
> [ 37.325042] ------------[ cut here ]------------
> [ 37.329895] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 37.339080] CUSTOM SRESP error with SOURCE:L4CFG
> [ 37.343933] Modules linked in: ehci_hcd(+)
> [ 37.348236] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 37.358093] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 37.368194] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 37.378417] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 37.389312] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 37.399627] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 37.409484] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 37.419555] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 37.428771] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 37.437286] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 37.446075] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 37.454650] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 37.463348] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 37.472229] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 37.477539] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 37.486145] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 37.494720] 9fa0: 20000013 ffffffff
> [ 37.498413] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 37.507080] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 37.515686] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 37.524444] ---[ end trace 52da08271889a1a8 ]---
> [ 37.529296] ------------[ cut here ]------------
> [ 37.534149] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 37.543365] CUSTOM SRESP error with SOURCE:L4CFG
> [ 37.548217] Modules linked in: ehci_hcd(+)
> [ 37.552551] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 37.562408] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 37.572479] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 37.582733] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 37.593597] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 37.603942] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 37.613800] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 37.623870] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 37.633117] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 37.641632] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 37.650390] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 37.658996] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 37.667694] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 37.676544] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 37.681854] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 37.690460] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 37.699035] 9fa0: 20000013 ffffffff
> [ 37.702697] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 37.711395] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 37.720001] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 37.728759] ---[ end trace 52da08271889a1a9 ]---
> [ 37.733642] ------------[ cut here ]------------
> [ 37.738464] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 37.747711] CUSTOM SRESP error with SOURCE:L4CFG
> [ 37.752563] Modules linked in: ehci_hcd(+)
> [ 37.756866] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 37.766723] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 37.776794] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 37.787048] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 37.797912] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 37.808258] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 37.818145] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 37.828216] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 37.837463] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 37.845977] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 37.854766] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 37.863342] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 37.872039] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 37.880920] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 37.886230] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 37.894836] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 37.903411] 9fa0: 20000013 ffffffff
> [ 37.907104] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 37.915802] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 37.924377] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 37.933166] ---[ end trace 52da08271889a1aa ]---
> [ 37.938049] ------------[ cut here ]------------
> [ 37.942901] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 37.952117] CUSTOM SRESP error with SOURCE:L4CFG
> [ 37.956970] Modules linked in: ehci_hcd(+)
> [ 37.961303] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 37.971191] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 37.981262] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 37.991516] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 38.002410] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 38.012725] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 38.022613] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 38.032684] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 38.041931] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 38.050445] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 38.059234] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 38.067810] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 38.076507] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 38.085388] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 38.090698] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 38.099304] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 38.107910] 9fa0: 20000013 ffffffff
> [ 38.111572] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 38.120239] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 38.128845] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 38.137603] ---[ end trace 52da08271889a1ab ]---
> [ 38.142486] ------------[ cut here ]------------
> [ 38.147338] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 38.156555] CUSTOM SRESP error with SOURCE:L4CFG
> [ 38.161376] Modules linked in: ehci_hcd(+)
> [ 38.165710] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 38.175598] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 38.185638] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 38.195861] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 38.206756] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 38.217102] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 38.226989] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 38.237030] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 38.246276] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 38.254760] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 38.263519] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 38.272125] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 38.280822] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 38.289672] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 38.294952] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 38.303558] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 38.312133] 9fa0: 20000013 ffffffff
> [ 38.315795] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 38.324462] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 38.333038] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 38.341796] ---[ end trace 52da08271889a1ac ]---
> [ 38.346679] ------------[ cut here ]------------
> [ 38.351531] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 38.360748] CUSTOM SRESP error with SOURCE:L4CFG
> [ 38.365570] Modules linked in: ehci_hcd(+)
> [ 38.369873] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 38.379760] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 38.389831] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 38.400085] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 38.410949] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 38.421295] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 38.431182] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 38.441223] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 38.450439] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 38.458953] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 38.467742] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 38.476348] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 38.485046] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 38.493896] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 38.499206] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 38.507751] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 38.516326] 9fa0: 20000013 ffffffff
> [ 38.519989] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 38.528686] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 38.537261] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 38.546051] ---[ end trace 52da08271889a1ad ]---
> [ 38.550903] ------------[ cut here ]------------
> [ 38.555755] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 38.565002] CUSTOM SRESP error with SOURCE:L4CFG
> [ 38.569854] Modules linked in: ehci_hcd(+)
> [ 38.574157] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 38.584045] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 38.594116] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 38.604370] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 38.615234] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 38.625579] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 38.635467] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 38.645538] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 38.654785] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 38.663269] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 38.672058] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 38.680664] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 38.689331] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 38.698211] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 38.703521] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 38.712127] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 38.720733] 9fa0: 20000013 ffffffff
> [ 38.724426] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 38.733123] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 38.741729] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 38.750488] ---[ end trace 52da08271889a1ae ]---
> [ 38.755340] ------------[ cut here ]------------
> [ 38.760192] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 38.769439] CUSTOM SRESP error with SOURCE:L4CFG
> [ 38.774261] Modules linked in: ehci_hcd(+)
> [ 38.778594] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 38.788482] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 38.798553] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 38.808776] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 38.819671] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 38.830017] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 38.839904] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 38.849945] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 38.859161] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 38.867675] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 38.876434] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 38.885009] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 38.893707] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 38.902526] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 38.907836] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 38.916412] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 38.924987] 9fa0: 20000013 ffffffff
> [ 38.928649] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 38.937347] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 38.945953] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 38.954711] ---[ end trace 52da08271889a1af ]---
> [ 38.959564] ------------[ cut here ]------------
> [ 38.964416] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 38.973632] CUSTOM SRESP error with SOURCE:L4CFG
> [ 38.978454] Modules linked in: ehci_hcd(+)
> [ 38.982757] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 38.992645] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 39.002716] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 39.012969] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 39.023864] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 39.034179] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 39.044067] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 39.054107] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 39.063323] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 39.071838] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 39.080627] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 39.089233] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 39.097930] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 39.106781] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 39.112121] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 39.120727] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 39.129333] 9fa0: 20000013 ffffffff
> [ 39.132995] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 39.141662] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
> [ 39.150268] [<c001544c>] (cpu_idle+0xc0/0x104) from [<c05bb82c>]
> (start_kernel+0x270/0x 300)
> [ 39.159057] ---[ end trace 52da08271889a1b0 ]---
> [ 39.163909] ------------[ cut here ]------------
> [ 39.168792] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:106
> l3_interrupt_handler+0x14 4/0x170()
> [ 39.178009] CUSTOM SRESP error with SOURCE:L4CFG
> [ 39.182861] Modules linked in: ehci_hcd(+)
> [ 39.187194] [<c001ae84>] (unwind_backtrace+0x0/0xf8) from
> [<c004ee10>] (warn_slowpath_c ommon+0x4c/0x64)
> [ 39.197052] [<c004ee10>] (warn_slowpath_common+0x4c/0x64) from
> [<c004eebc>] (warn_slowp ath_fmt+0x30/0x40)
> [ 39.207122] [<c004eebc>] (warn_slowpath_fmt+0x30/0x40) from
> [<c0030318>] (l3_interrupt_ handler+0x144/0x170)
> [ 39.217346] [<c0030318>] (l3_interrupt_handler+0x144/0x170) from
> [<c0097aac>] (handle_i rq_event_percpu+0x74/0x208)
> [ 39.228240] [<c0097aac>] (handle_irq_event_percpu+0x74/0x208) from
> [<c0097c7c>] (handle _irq_event+0x3c/0x5c)
> [ 39.238586] [<c0097c7c>] (handle_irq_event+0x3c/0x5c) from
> [<c009a288>] (handle_fasteoi _irq+0x98/0x110)
> [ 39.248474] [<c009a288>] (handle_fasteoi_irq+0x98/0x110) from
> [<c0097624>] (generic_han dle_irq+0x38/0x48)
> [ 39.258544] [<c0097624>] (generic_handle_irq+0x38/0x48) from
> [<c0014c88>] (handle_IRQ+0 x4c/0xac)
> [ 39.267791] [<c0014c88>] (handle_IRQ+0x4c/0xac) from [<c041b89c>]
> (__irq_svc+0x3c/0x100 )
> [ 39.276306] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0055d70>]
> (__do_softirq+0x64/0x 21c)
> [ 39.285095] [<c0055d70>] (__do_softirq+0x64/0x21c) from
> [<c0056124>] (irq_exit+0x90/0xa c)
> [ 39.293701] [<c0056124>] (irq_exit+0x90/0xac) from [<c0008474>]
> (do_local_timer+0x58/0x 74)
> [ 39.302398] [<c0008474>] (do_local_timer+0x58/0x74) from
> [<c041b89c>] (__irq_svc+0x3c/0 x100)
> [ 39.311248] Exception stack(0xc0609f60 to 0xc0609fa8)
> [ 39.316589] 9f60: 00000001 00000001 c06209c8 00000000 c0608000
> c068be24 c061d96c 000000 00
> [ 39.325195] 9f80: c0622184 411fc092 c0622338 00000000 c0605770
> c0609fa8 c008569c c0014e 00
> [ 39.333801] 9fa0: 20000013 ffffffff
> [ 39.337463] [<c041b89c>] (__irq_svc+0x3c/0x100) from [<c0014e00>]
> (default_idle+0x30/0x 38)
> [ 39.346160] [<c0014e00>] (default_idle+0x30/0x38) from [<c001544c>]
> (cpu_idle+0xc0/0x10 4)
>
>
> it's crashing l3 cache; its occurrence is very random and rare in omap4 sdp.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
[not found] ` <4E43C41E.1080808-l0cyMroinI0@public.gmane.org>
@ 2011-08-11 12:20 ` Luciano Coelho
2011-08-11 12:33 ` Munegowda, Keshava
0 siblings, 1 reply; 24+ messages in thread
From: Luciano Coelho @ 2011-08-11 12:20 UTC (permalink / raw)
To: Rajendra Nayak
Cc: Ohad Ben-Cohen, Paul Walmsley, Cousson, Benoit,
balbi-l0cyMroinI0, sameo-VuQAYsv1563Yd54FQh9/CA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA, Keshava Munegowda,
Kevin Hilman
On Thu, 2011-08-11 at 17:29 +0530, Rajendra Nayak wrote:
> On 8/11/2011 1:37 PM, Ohad Ben-Cohen wrote:
> > + Paul, Benoit, Rajendra
> >
> > On Tue, Aug 9, 2011 at 2:26 PM, Luciano Coelho<coelho-l0cyMroinI0@public.gmane.org> wrote:
> >> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
> >>
> >> [ 2.054351] usbcore: registered new interface driver cdc_ncm
> >> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> >> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> >> [ 2.076110] Internal error: : 1406 [#1] SMP
> >> [ 2.080505] Modules linked in:
> >> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
> >> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
> >> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
> > ...
> >> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
> >> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
> >> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
> >> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
> >> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
> >> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
> >> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
> >> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
> >> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
> >> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
> >> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
> >> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
> >> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
> >
> > I get this too.
> >
> >> Any clues?
>
> Its quite expected as omap_usbhs_enable() still relies on clock
> framework to enable the clocks.
> Any driver still using clock framework on OMAP4 to enable "main" clocks
> is expected to be broken. The only way to fix this is to adapt
> the driver to runtime PM.
Well, this is a regression in 3.1 and must be fixed. It's probably too
late to make big changes in the usbhs driver, so probably the change in
OMAP that broke this should be reverted.
--
Cheers,
Luca.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda
2011-08-11 12:20 ` Luciano Coelho
@ 2011-08-11 12:33 ` Munegowda, Keshava
2011-08-19 22:48 ` Paul Walmsley
0 siblings, 1 reply; 24+ messages in thread
From: Munegowda, Keshava @ 2011-08-11 12:33 UTC (permalink / raw)
To: Luciano Coelho
Cc: Rajendra Nayak, Ohad Ben-Cohen, Paul Walmsley, Cousson, Benoit,
balbi-l0cyMroinI0, sameo-VuQAYsv1563Yd54FQh9/CA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA, Kevin Hilman
On Thu, Aug 11, 2011 at 5:50 PM, Luciano Coelho <coelho-l0cyMroinI0@public.gmane.org> wrote:
> On Thu, 2011-08-11 at 17:29 +0530, Rajendra Nayak wrote:
>> On 8/11/2011 1:37 PM, Ohad Ben-Cohen wrote:
>> > + Paul, Benoit, Rajendra
>> >
>> > On Tue, Aug 9, 2011 at 2:26 PM, Luciano Coelho<coelho-l0cyMroinI0@public.gmane.org> wrote:
>> >> I'm again getting a very similar oops with 3.1-rc1 on my pandaboard:
>> >>
>> >> [ 2.054351] usbcore: registered new interface driver cdc_ncm
>> >> [ 2.061431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> >> [ 2.068664] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
>> >> [ 2.076110] Internal error: : 1406 [#1] SMP
>> >> [ 2.080505] Modules linked in:
>> >> [ 2.083709] CPU: 0 Not tainted (3.1.0-rc1-wl+ #283)
>> >> [ 2.089233] PC is at omap_usbhs_enable+0x148/0x590
>> >> [ 2.094299] LR is at trace_hardirqs_off+0x14/0x18
>> > ...
>> >> [ 2.310150] [<c02a8640>] (omap_usbhs_enable+0x148/0x590) from [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568)
>> >> [ 2.320526] [<c0321d60>] (ehci_hcd_omap_probe+0x1b4/0x568) from [<c0298cfc>] (platform_drv_probe+0x24/0x28)
>> >> [ 2.330780] [<c0298cfc>] (platform_drv_probe+0x24/0x28) from [<c0297650>] (driver_probe_device+0x158/0x27c)
>> >> [ 2.341033] [<c0297650>] (driver_probe_device+0x158/0x27c) from [<c02977ec>] (__driver_attach+0x78/0x9c)
>> >> [ 2.351043] [<c02977ec>] (__driver_attach+0x78/0x9c) from [<c0296c00>] (bus_for_each_dev+0x5c/0x8c)
>> >> [ 2.360565] [<c0296c00>] (bus_for_each_dev+0x5c/0x8c) from [<c0297334>] (driver_attach+0x28/0x30)
>> >> [ 2.369903] [<c0297334>] (driver_attach+0x28/0x30) from [<c02963ec>] (bus_add_driver+0xd8/0x260)
>> >> [ 2.379180] [<c02963ec>] (bus_add_driver+0xd8/0x260) from [<c0297f00>] (driver_register+0xb8/0x144)
>> >> [ 2.388702] [<c0297f00>] (driver_register+0xb8/0x144) from [<c02991e0>] (platform_driver_register+0x54/0x68)
>> >> [ 2.399047] [<c02991e0>] (platform_driver_register+0x54/0x68) from [<c069904c>] (ehci_hcd_init+0xa8/0xfc)
>> >> [ 2.409149] [<c069904c>] (ehci_hcd_init+0xa8/0xfc) from [<c0008854>] (do_one_initcall+0xa8/0x17c)
>> >> [ 2.418487] [<c0008854>] (do_one_initcall+0xa8/0x17c) from [<c06792d4>] (kernel_init+0x88/0x134)
>> >> [ 2.427764] [<c06792d4>] (kernel_init+0x88/0x134) from [<c0014ba0>] (kernel_thread_exit+0x0/0x8)
>> >
>> > I get this too.
>> >
>> >> Any clues?
>>
>> Its quite expected as omap_usbhs_enable() still relies on clock
>> framework to enable the clocks.
>> Any driver still using clock framework on OMAP4 to enable "main" clocks
>> is expected to be broken. The only way to fix this is to adapt
>> the driver to runtime PM.
>
> Well, this is a regression in 3.1 and must be fixed. It's probably too
> late to make big changes in the usbhs driver, so probably the change in
> OMAP that broke this should be reverted.
No, I have already posted the runtime pm patches for usbhs driver;
Here are the patches
https://patchwork.kernel.org/patch/1049822/
https://patchwork.kernel.org/patch/1049772/
https://patchwork.kernel.org/patch/1049792/
https://patchwork.kernel.org/patch/1049842/
https://patchwork.kernel.org/patch/1049832/
There are review comments on these patches; I will be sending v5 of
these patches tommarrow.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)
2011-08-11 12:33 ` Munegowda, Keshava
@ 2011-08-19 22:48 ` Paul Walmsley
0 siblings, 0 replies; 24+ messages in thread
From: Paul Walmsley @ 2011-08-19 22:48 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Munegowda, Keshava, Luciano Coelho, Rajendra Nayak,
Ohad Ben-Cohen, Cousson, Benoit, balbi, sameo, linux-omap,
linux-usb, Kevin Hilman
[-- Attachment #1: Type: TEXT/PLAIN, Size: 4595 bytes --]
After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod:
Follow the recommended PRCM module enable sequence"), device drivers
for OMAP IP blocks that do not use runtime PM can cause oopses or
kernel instability[1][2].
This is because those non-runtime PM drivers do not use the hwmod
code, which implements the correct IP block enable and disable
sequence.
Several options for dealing with this problem have been proposed:
1. Add a new field to the OMAP struct clk to mark clocks that are
currently used by non-runtime PM drivers. Modify the clock code to
use the old clockdomain sequence for these marked clocks. As
drivers are converted to use runtime PM, remove the annotation from
the clocks.
2. Similar to #1, but associate the flag with the struct omap_clk
instead.
3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
it is implemented for OMAP2/3, and enable it in each struct clk
currently used by non-runtime PM drivers. As drivers are converted
to use runtime PM, remove the annotation from the clocks.
4. Do nothing; leave the problem to those responsible for the
unconverted drivers.
5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
This would revert back to the behavior of Linux 3.0, simply with a
slightly longer module enable/disable latency.
Unfortunately, no approach seemed particularly good. Options 1
through 3 seemed unwise due to the following reasons:
A. The OMAP struct clks are intended primarily to describe hardware
clock nodes, and the intention is that no driver-specific data
should be stored there (applies to #1)
B. The resulting patch would have been quite large for the -rc series
(applies to #1, #2, #3)
C. The patch would have been a new, yet temporary hack; and similar fixes
have drawn negative comments in the recent past (see for example [3])
Option 4 is undesirable because commit
665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the
recommended PRCM module enable sequence") has resulted in a less
stable kernel; and kernel stability is more important than OMAP4 power
management.
Option 5 is the approach taken in this patch. This seemed to be the
least intrusive approach for 3.1-rc.
The approach in this patch was originally proposed by Ohad Ben-Cohen
<ohad@wizery.com>. I'm simply writing the commit message and passing
it along.
...
Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem.
Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem
down, generating a temporary workaround, and proposing a patch to deal
with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for
proposing another patch to deal with the problem.
This patch is intended for the 3.1-rc fixes series.
1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when
booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300.
Posted to the <linux-omap@vger.kernel.org> mailing list. Available
from (among others)
http://www.spinics.net/linux/lists/linux-omap/msg55213.html
2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530.
Posted to the <linux-omap@vger.kernel.org> mailing list. Available
from (among others)
http://www.spinics.net/linux/lists/linux-omap/msg55371.html
3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4:
PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun
2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org>
mailing list. Available from (among others)
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg51392.html
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Luciano Coelho <coelho@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
---
arch/arm/mach-omap2/clock44xx_data.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2af0e3f..fe6508d 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3379,7 +3379,7 @@ int __init omap4xxx_clk_init(void)
}
clk_init(&omap2_clk_functions);
- omap2_clk_disable_clkdm_control();
+ /* omap2_clk_disable_clkdm_control(); */
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
--
1.7.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)
@ 2011-08-19 22:48 ` Paul Walmsley
0 siblings, 0 replies; 24+ messages in thread
From: Paul Walmsley @ 2011-08-19 22:48 UTC (permalink / raw)
To: linux-arm-kernel
After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod:
Follow the recommended PRCM module enable sequence"), device drivers
for OMAP IP blocks that do not use runtime PM can cause oopses or
kernel instability[1][2].
This is because those non-runtime PM drivers do not use the hwmod
code, which implements the correct IP block enable and disable
sequence.
Several options for dealing with this problem have been proposed:
1. Add a new field to the OMAP struct clk to mark clocks that are
currently used by non-runtime PM drivers. Modify the clock code to
use the old clockdomain sequence for these marked clocks. As
drivers are converted to use runtime PM, remove the annotation from
the clocks.
2. Similar to #1, but associate the flag with the struct omap_clk
instead.
3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
it is implemented for OMAP2/3, and enable it in each struct clk
currently used by non-runtime PM drivers. As drivers are converted
to use runtime PM, remove the annotation from the clocks.
4. Do nothing; leave the problem to those responsible for the
unconverted drivers.
5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
This would revert back to the behavior of Linux 3.0, simply with a
slightly longer module enable/disable latency.
Unfortunately, no approach seemed particularly good. Options 1
through 3 seemed unwise due to the following reasons:
A. The OMAP struct clks are intended primarily to describe hardware
clock nodes, and the intention is that no driver-specific data
should be stored there (applies to #1)
B. The resulting patch would have been quite large for the -rc series
(applies to #1, #2, #3)
C. The patch would have been a new, yet temporary hack; and similar fixes
have drawn negative comments in the recent past (see for example [3])
Option 4 is undesirable because commit
665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the
recommended PRCM module enable sequence") has resulted in a less
stable kernel; and kernel stability is more important than OMAP4 power
management.
Option 5 is the approach taken in this patch. This seemed to be the
least intrusive approach for 3.1-rc.
The approach in this patch was originally proposed by Ohad Ben-Cohen
<ohad@wizery.com>. I'm simply writing the commit message and passing
it along.
...
Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem.
Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem
down, generating a temporary workaround, and proposing a patch to deal
with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for
proposing another patch to deal with the problem.
This patch is intended for the 3.1-rc fixes series.
1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when
booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300.
Posted to the <linux-omap@vger.kernel.org> mailing list. Available
from (among others)
http://www.spinics.net/linux/lists/linux-omap/msg55213.html
2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530.
Posted to the <linux-omap@vger.kernel.org> mailing list. Available
from (among others)
http://www.spinics.net/linux/lists/linux-omap/msg55371.html
3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4:
PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun
2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org>
mailing list. Available from (among others)
http://www.mail-archive.com/linux-omap at vger.kernel.org/msg51392.html
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Luciano Coelho <coelho@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Beno?t Cousson <b-cousson@ti.com>
---
arch/arm/mach-omap2/clock44xx_data.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2af0e3f..fe6508d 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3379,7 +3379,7 @@ int __init omap4xxx_clk_init(void)
}
clk_init(&omap2_clk_functions);
- omap2_clk_disable_clkdm_control();
+ /* omap2_clk_disable_clkdm_control(); */
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
--
1.7.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)
2011-08-19 22:48 ` Paul Walmsley
@ 2011-08-19 23:08 ` Felipe Balbi
-1 siblings, 0 replies; 24+ messages in thread
From: Felipe Balbi @ 2011-08-19 23:08 UTC (permalink / raw)
To: Paul Walmsley
Cc: Ohad Ben-Cohen, Kevin Hilman, Luciano Coelho, Cousson, Benoit,
Rajendra Nayak, balbi, linux-usb, Munegowda, Keshava, linux-omap,
linux-arm-kernel, sameo
[-- Attachment #1.1: Type: text/plain, Size: 4955 bytes --]
Hi,
On Fri, Aug 19, 2011 at 04:48:52PM -0600, Paul Walmsley wrote:
>
> After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod:
> Follow the recommended PRCM module enable sequence"), device drivers
> for OMAP IP blocks that do not use runtime PM can cause oopses or
> kernel instability[1][2].
>
> This is because those non-runtime PM drivers do not use the hwmod
> code, which implements the correct IP block enable and disable
> sequence.
>
> Several options for dealing with this problem have been proposed:
>
> 1. Add a new field to the OMAP struct clk to mark clocks that are
> currently used by non-runtime PM drivers. Modify the clock code to
> use the old clockdomain sequence for these marked clocks. As
> drivers are converted to use runtime PM, remove the annotation from
> the clocks.
>
> 2. Similar to #1, but associate the flag with the struct omap_clk
> instead.
>
> 3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
> it is implemented for OMAP2/3, and enable it in each struct clk
> currently used by non-runtime PM drivers. As drivers are converted
> to use runtime PM, remove the annotation from the clocks.
>
> 4. Do nothing; leave the problem to those responsible for the
> unconverted drivers.
>
> 5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
> This would revert back to the behavior of Linux 3.0, simply with a
> slightly longer module enable/disable latency.
>
> Unfortunately, no approach seemed particularly good. Options 1
> through 3 seemed unwise due to the following reasons:
>
> A. The OMAP struct clks are intended primarily to describe hardware
> clock nodes, and the intention is that no driver-specific data
> should be stored there (applies to #1)
>
> B. The resulting patch would have been quite large for the -rc series
> (applies to #1, #2, #3)
>
> C. The patch would have been a new, yet temporary hack; and similar fixes
> have drawn negative comments in the recent past (see for example [3])
>
> Option 4 is undesirable because commit
> 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the
> recommended PRCM module enable sequence") has resulted in a less
> stable kernel; and kernel stability is more important than OMAP4 power
> management.
>
> Option 5 is the approach taken in this patch. This seemed to be the
> least intrusive approach for 3.1-rc.
>
> The approach in this patch was originally proposed by Ohad Ben-Cohen
> <ohad@wizery.com>. I'm simply writing the commit message and passing
> it along.
>
> ...
>
> Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem.
> Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem
> down, generating a temporary workaround, and proposing a patch to deal
> with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for
> proposing another patch to deal with the problem.
>
> This patch is intended for the 3.1-rc fixes series.
>
> 1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when
> booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300.
> Posted to the <linux-omap@vger.kernel.org> mailing list. Available
> from (among others)
> http://www.spinics.net/linux/lists/linux-omap/msg55213.html
>
> 2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
> when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530.
> Posted to the <linux-omap@vger.kernel.org> mailing list. Available
> from (among others)
> http://www.spinics.net/linux/lists/linux-omap/msg55371.html
>
> 3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4:
> PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun
> 2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org>
> mailing list. Available from (among others)
> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg51392.html
>
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> Cc: Luciano Coelho <coelho@ti.com>
> Cc: Ohad Ben-Cohen <ohad@wizery.com>
> Cc: Rajendra Nayak <rnayak@ti.com>
> Cc: Benoît Cousson <b-cousson@ti.com>
> ---
> arch/arm/mach-omap2/clock44xx_data.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
> index 2af0e3f..fe6508d 100644
> --- a/arch/arm/mach-omap2/clock44xx_data.c
> +++ b/arch/arm/mach-omap2/clock44xx_data.c
> @@ -3379,7 +3379,7 @@ int __init omap4xxx_clk_init(void)
> }
>
> clk_init(&omap2_clk_functions);
maybe add a comment here stating why this line is commented out ?
> - omap2_clk_disable_clkdm_control();
> + /* omap2_clk_disable_clkdm_control(); */
>
> for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
> c++)
--
balbi
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)
@ 2011-08-19 23:08 ` Felipe Balbi
0 siblings, 0 replies; 24+ messages in thread
From: Felipe Balbi @ 2011-08-19 23:08 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Fri, Aug 19, 2011 at 04:48:52PM -0600, Paul Walmsley wrote:
>
> After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod:
> Follow the recommended PRCM module enable sequence"), device drivers
> for OMAP IP blocks that do not use runtime PM can cause oopses or
> kernel instability[1][2].
>
> This is because those non-runtime PM drivers do not use the hwmod
> code, which implements the correct IP block enable and disable
> sequence.
>
> Several options for dealing with this problem have been proposed:
>
> 1. Add a new field to the OMAP struct clk to mark clocks that are
> currently used by non-runtime PM drivers. Modify the clock code to
> use the old clockdomain sequence for these marked clocks. As
> drivers are converted to use runtime PM, remove the annotation from
> the clocks.
>
> 2. Similar to #1, but associate the flag with the struct omap_clk
> instead.
>
> 3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
> it is implemented for OMAP2/3, and enable it in each struct clk
> currently used by non-runtime PM drivers. As drivers are converted
> to use runtime PM, remove the annotation from the clocks.
>
> 4. Do nothing; leave the problem to those responsible for the
> unconverted drivers.
>
> 5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
> This would revert back to the behavior of Linux 3.0, simply with a
> slightly longer module enable/disable latency.
>
> Unfortunately, no approach seemed particularly good. Options 1
> through 3 seemed unwise due to the following reasons:
>
> A. The OMAP struct clks are intended primarily to describe hardware
> clock nodes, and the intention is that no driver-specific data
> should be stored there (applies to #1)
>
> B. The resulting patch would have been quite large for the -rc series
> (applies to #1, #2, #3)
>
> C. The patch would have been a new, yet temporary hack; and similar fixes
> have drawn negative comments in the recent past (see for example [3])
>
> Option 4 is undesirable because commit
> 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the
> recommended PRCM module enable sequence") has resulted in a less
> stable kernel; and kernel stability is more important than OMAP4 power
> management.
>
> Option 5 is the approach taken in this patch. This seemed to be the
> least intrusive approach for 3.1-rc.
>
> The approach in this patch was originally proposed by Ohad Ben-Cohen
> <ohad@wizery.com>. I'm simply writing the commit message and passing
> it along.
>
> ...
>
> Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem.
> Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem
> down, generating a temporary workaround, and proposing a patch to deal
> with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for
> proposing another patch to deal with the problem.
>
> This patch is intended for the 3.1-rc fixes series.
>
> 1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when
> booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300.
> Posted to the <linux-omap@vger.kernel.org> mailing list. Available
> from (among others)
> http://www.spinics.net/linux/lists/linux-omap/msg55213.html
>
> 2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
> when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530.
> Posted to the <linux-omap@vger.kernel.org> mailing list. Available
> from (among others)
> http://www.spinics.net/linux/lists/linux-omap/msg55371.html
>
> 3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4:
> PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun
> 2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org>
> mailing list. Available from (among others)
> http://www.mail-archive.com/linux-omap at vger.kernel.org/msg51392.html
>
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> Cc: Luciano Coelho <coelho@ti.com>
> Cc: Ohad Ben-Cohen <ohad@wizery.com>
> Cc: Rajendra Nayak <rnayak@ti.com>
> Cc: Beno?t Cousson <b-cousson@ti.com>
> ---
> arch/arm/mach-omap2/clock44xx_data.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
> index 2af0e3f..fe6508d 100644
> --- a/arch/arm/mach-omap2/clock44xx_data.c
> +++ b/arch/arm/mach-omap2/clock44xx_data.c
> @@ -3379,7 +3379,7 @@ int __init omap4xxx_clk_init(void)
> }
>
> clk_init(&omap2_clk_functions);
maybe add a comment here stating why this line is commented out ?
> - omap2_clk_disable_clkdm_control();
> + /* omap2_clk_disable_clkdm_control(); */
>
> for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
> c++)
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 490 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110820/bc3a4979/attachment-0001.sig>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)
2011-08-19 23:08 ` Felipe Balbi
@ 2011-08-20 3:32 ` Paul Walmsley
-1 siblings, 0 replies; 24+ messages in thread
From: Paul Walmsley @ 2011-08-20 3:32 UTC (permalink / raw)
To: Felipe Balbi
Cc: Ohad Ben-Cohen, Kevin Hilman, Luciano Coelho, Cousson, Benoit,
Rajendra Nayak, linux-usb, Munegowda, Keshava, linux-omap,
linux-arm-kernel, sameo
[-- Attachment #1: Type: TEXT/PLAIN, Size: 5290 bytes --]
On Sat, 20 Aug 2011, Felipe Balbi wrote:
> maybe add a comment here stating why this line is commented out ?
>
> > - omap2_clk_disable_clkdm_control();
> > + /* omap2_clk_disable_clkdm_control(); */
Thanks for your comments. I've updated the patch; it follows below.
- Paul
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 19 Aug 2011 16:59:56 -0600
Subject: [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable
sequence
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod:
Follow the recommended PRCM module enable sequence"), device drivers
for OMAP IP blocks that do not use runtime PM can cause oopses or
kernel instability[1][2].
This is because those non-runtime PM drivers do not use the hwmod
code, which implements the correct IP block enable and disable
sequence.
Several options for dealing with this problem have been proposed:
1. Add a new field to the OMAP struct clk to mark clocks that are
currently used by non-runtime PM drivers. Modify the clock code to
use the old clockdomain sequence for these marked clocks. As
drivers are converted to use runtime PM, remove the annotation from
the clocks.
2. Similar to #1, but associate the flag with the struct omap_clk
instead.
3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
it is implemented for OMAP2/3, and enable it in each struct clk
currently used by non-runtime PM drivers. As drivers are converted
to use runtime PM, remove the annotation from the clocks.
4. Do nothing; leave the problem to those responsible for the
unconverted drivers.
5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
This would revert back to the behavior of Linux 3.0, simply with a
slightly longer module enable/disable latency.
Unfortunately, no approach seemed particularly good. Options 1
through 3 seemed unwise due to the following reasons:
A. The OMAP struct clks are intended primarily to describe hardware
clock nodes, and the intention is that no driver-specific data
should be stored there (applies to #1)
B. The resulting patch would have been quite large for the -rc series
(applies to #1, #2, #3)
C. The patch would have been a new, yet temporary hack; and similar fixes
have drawn negative comments in the recent past (see for example [3])
Option 4 is undesirable because commit
665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the
recommended PRCM module enable sequence") has resulted in a less
stable kernel; and kernel stability is more important than OMAP4 power
management.
Option 5 is the approach taken in this patch. This seemed to be the
least intrusive approach for 3.1-rc.
The approach in this patch was originally proposed by Ohad Ben-Cohen
<ohad@wizery.com>. I'm simply writing the commit message and passing
it along.
...
Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem.
Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem
down, generating a temporary workaround, and proposing a patch to deal
with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for
proposing another patch to deal with the problem. Thanks to Felipe
Balbi <balbi@ti.com> for comments.
1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when
booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300.
Posted to the <linux-omap@vger.kernel.org> mailing list. Available
from (among others)
http://www.spinics.net/linux/lists/linux-omap/msg55213.html
2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530.
Posted to the <linux-omap@vger.kernel.org> mailing list. Available
from (among others)
http://www.spinics.net/linux/lists/linux-omap/msg55371.html
3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4:
PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun
2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org>
mailing list. Available from (among others)
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg51392.html
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Luciano Coelho <coelho@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
---
arch/arm/mach-omap2/clock44xx_data.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2af0e3f..a3a1827 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3379,7 +3379,13 @@ int __init omap4xxx_clk_init(void)
}
clk_init(&omap2_clk_functions);
- omap2_clk_disable_clkdm_control();
+
+ /*
+ * Must stay commented until all OMAP SoC drivers are
+ * converted to runtime PM, or drivers may start crashing
+ *
+ * omap2_clk_disable_clkdm_control();
+ */
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
--
1.7.5.4
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)
@ 2011-08-20 3:32 ` Paul Walmsley
0 siblings, 0 replies; 24+ messages in thread
From: Paul Walmsley @ 2011-08-20 3:32 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, 20 Aug 2011, Felipe Balbi wrote:
> maybe add a comment here stating why this line is commented out ?
>
> > - omap2_clk_disable_clkdm_control();
> > + /* omap2_clk_disable_clkdm_control(); */
Thanks for your comments. I've updated the patch; it follows below.
- Paul
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 19 Aug 2011 16:59:56 -0600
Subject: [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable
sequence
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod:
Follow the recommended PRCM module enable sequence"), device drivers
for OMAP IP blocks that do not use runtime PM can cause oopses or
kernel instability[1][2].
This is because those non-runtime PM drivers do not use the hwmod
code, which implements the correct IP block enable and disable
sequence.
Several options for dealing with this problem have been proposed:
1. Add a new field to the OMAP struct clk to mark clocks that are
currently used by non-runtime PM drivers. Modify the clock code to
use the old clockdomain sequence for these marked clocks. As
drivers are converted to use runtime PM, remove the annotation from
the clocks.
2. Similar to #1, but associate the flag with the struct omap_clk
instead.
3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
it is implemented for OMAP2/3, and enable it in each struct clk
currently used by non-runtime PM drivers. As drivers are converted
to use runtime PM, remove the annotation from the clocks.
4. Do nothing; leave the problem to those responsible for the
unconverted drivers.
5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
This would revert back to the behavior of Linux 3.0, simply with a
slightly longer module enable/disable latency.
Unfortunately, no approach seemed particularly good. Options 1
through 3 seemed unwise due to the following reasons:
A. The OMAP struct clks are intended primarily to describe hardware
clock nodes, and the intention is that no driver-specific data
should be stored there (applies to #1)
B. The resulting patch would have been quite large for the -rc series
(applies to #1, #2, #3)
C. The patch would have been a new, yet temporary hack; and similar fixes
have drawn negative comments in the recent past (see for example [3])
Option 4 is undesirable because commit
665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the
recommended PRCM module enable sequence") has resulted in a less
stable kernel; and kernel stability is more important than OMAP4 power
management.
Option 5 is the approach taken in this patch. This seemed to be the
least intrusive approach for 3.1-rc.
The approach in this patch was originally proposed by Ohad Ben-Cohen
<ohad@wizery.com>. I'm simply writing the commit message and passing
it along.
...
Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem.
Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem
down, generating a temporary workaround, and proposing a patch to deal
with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for
proposing another patch to deal with the problem. Thanks to Felipe
Balbi <balbi@ti.com> for comments.
1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when
booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300.
Posted to the <linux-omap@vger.kernel.org> mailing list. Available
from (among others)
http://www.spinics.net/linux/lists/linux-omap/msg55213.html
2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530.
Posted to the <linux-omap@vger.kernel.org> mailing list. Available
from (among others)
http://www.spinics.net/linux/lists/linux-omap/msg55371.html
3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4:
PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun
2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org>
mailing list. Available from (among others)
http://www.mail-archive.com/linux-omap at vger.kernel.org/msg51392.html
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Luciano Coelho <coelho@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Beno?t Cousson <b-cousson@ti.com>
---
arch/arm/mach-omap2/clock44xx_data.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2af0e3f..a3a1827 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3379,7 +3379,13 @@ int __init omap4xxx_clk_init(void)
}
clk_init(&omap2_clk_functions);
- omap2_clk_disable_clkdm_control();
+
+ /*
+ * Must stay commented until all OMAP SoC drivers are
+ * converted to runtime PM, or drivers may start crashing
+ *
+ * omap2_clk_disable_clkdm_control();
+ */
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
--
1.7.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)
2011-08-20 3:32 ` Paul Walmsley
@ 2011-08-20 6:15 ` Santosh
-1 siblings, 0 replies; 24+ messages in thread
From: Santosh @ 2011-08-20 6:15 UTC (permalink / raw)
To: Paul Walmsley
Cc: Felipe Balbi, Ohad Ben-Cohen, Kevin Hilman, Luciano Coelho,
Cousson, Benoit, Rajendra Nayak, linux-usb, Munegowda, Keshava,
linux-omap, linux-arm-kernel, sameo
> From: Paul Walmsley<paul@pwsan.com>
> Date: Fri, 19 Aug 2011 16:59:56 -0600
> Subject: [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable
> sequence
> MIME-Version: 1.0
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: 8bit
>
> After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod:
> Follow the recommended PRCM module enable sequence"), device drivers
> for OMAP IP blocks that do not use runtime PM can cause oopses or
> kernel instability[1][2].
>
> This is because those non-runtime PM drivers do not use the hwmod
> code, which implements the correct IP block enable and disable
> sequence.
>
> Several options for dealing with this problem have been proposed:
>
> 1. Add a new field to the OMAP struct clk to mark clocks that are
> currently used by non-runtime PM drivers. Modify the clock code to
> use the old clockdomain sequence for these marked clocks. As
> drivers are converted to use runtime PM, remove the annotation from
> the clocks.
>
> 2. Similar to #1, but associate the flag with the struct omap_clk
> instead.
>
> 3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
> it is implemented for OMAP2/3, and enable it in each struct clk
> currently used by non-runtime PM drivers. As drivers are converted
> to use runtime PM, remove the annotation from the clocks.
>
> 4. Do nothing; leave the problem to those responsible for the
> unconverted drivers.
>
> 5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
> This would revert back to the behavior of Linux 3.0, simply with a
> slightly longer module enable/disable latency.
>
> Unfortunately, no approach seemed particularly good. Options 1
> through 3 seemed unwise due to the following reasons:
>
> A. The OMAP struct clks are intended primarily to describe hardware
> clock nodes, and the intention is that no driver-specific data
> should be stored there (applies to #1)
>
> B. The resulting patch would have been quite large for the -rc series
> (applies to #1, #2, #3)
>
> C. The patch would have been a new, yet temporary hack; and similar fixes
> have drawn negative comments in the recent past (see for example [3])
>
> Option 4 is undesirable because commit
> 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the
> recommended PRCM module enable sequence") has resulted in a less
> stable kernel; and kernel stability is more important than OMAP4 power
> management.
>
> Option 5 is the approach taken in this patch. This seemed to be the
> least intrusive approach for 3.1-rc.
>
> The approach in this patch was originally proposed by Ohad Ben-Cohen
> <ohad@wizery.com>. I'm simply writing the commit message and passing
> it along.
>
> ...
>
> Thanks to Luciano Coelho<coelho@ti.com> for reporting the problem.
> Thanks to Ohad Ben-Cohen<ohad@wizery.com> for tracking the problem
> down, generating a temporary workaround, and proposing a patch to deal
> with the problem. Thanks to Rajendra Nayak<rnayak@ti.com> for
> proposing another patch to deal with the problem. Thanks to Felipe
> Balbi<balbi@ti.com> for comments.
>
> 1. Coelho, Luciano<coelho@ti.com>. _Re: Oops on ehci_hcd when
> booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300.
> Posted to the<linux-omap@vger.kernel.org> mailing list. Available
> from (among others)
> http://www.spinics.net/linux/lists/linux-omap/msg55213.html
>
> 2. Munegowda, Keshava<keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
> when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530.
> Posted to the<linux-omap@vger.kernel.org> mailing list. Available
> from (among others)
> http://www.spinics.net/linux/lists/linux-omap/msg55371.html
>
> 3. King, Russell<linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4:
> PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun
> 2011 16:22:49 +0100. Posted to the<linux-omap@vger.kernel.org>
> mailing list. Available from (among others)
> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg51392.html
>
> Signed-off-by: Paul Walmsley<paul@pwsan.com>
> Cc: Luciano Coelho<coelho@ti.com>
> Cc: Ohad Ben-Cohen<ohad@wizery.com>
> Cc: Rajendra Nayak<rnayak@ti.com>
> Cc: Benoît Cousson<b-cousson@ti.com>
> ---
Thanks for the change log.
Here is my ack if you need one.
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Regards
santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)
@ 2011-08-20 6:15 ` Santosh
0 siblings, 0 replies; 24+ messages in thread
From: Santosh @ 2011-08-20 6:15 UTC (permalink / raw)
To: linux-arm-kernel
> From: Paul Walmsley<paul@pwsan.com>
> Date: Fri, 19 Aug 2011 16:59:56 -0600
> Subject: [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable
> sequence
> MIME-Version: 1.0
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: 8bit
>
> After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod:
> Follow the recommended PRCM module enable sequence"), device drivers
> for OMAP IP blocks that do not use runtime PM can cause oopses or
> kernel instability[1][2].
>
> This is because those non-runtime PM drivers do not use the hwmod
> code, which implements the correct IP block enable and disable
> sequence.
>
> Several options for dealing with this problem have been proposed:
>
> 1. Add a new field to the OMAP struct clk to mark clocks that are
> currently used by non-runtime PM drivers. Modify the clock code to
> use the old clockdomain sequence for these marked clocks. As
> drivers are converted to use runtime PM, remove the annotation from
> the clocks.
>
> 2. Similar to #1, but associate the flag with the struct omap_clk
> instead.
>
> 3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
> it is implemented for OMAP2/3, and enable it in each struct clk
> currently used by non-runtime PM drivers. As drivers are converted
> to use runtime PM, remove the annotation from the clocks.
>
> 4. Do nothing; leave the problem to those responsible for the
> unconverted drivers.
>
> 5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
> This would revert back to the behavior of Linux 3.0, simply with a
> slightly longer module enable/disable latency.
>
> Unfortunately, no approach seemed particularly good. Options 1
> through 3 seemed unwise due to the following reasons:
>
> A. The OMAP struct clks are intended primarily to describe hardware
> clock nodes, and the intention is that no driver-specific data
> should be stored there (applies to #1)
>
> B. The resulting patch would have been quite large for the -rc series
> (applies to #1, #2, #3)
>
> C. The patch would have been a new, yet temporary hack; and similar fixes
> have drawn negative comments in the recent past (see for example [3])
>
> Option 4 is undesirable because commit
> 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the
> recommended PRCM module enable sequence") has resulted in a less
> stable kernel; and kernel stability is more important than OMAP4 power
> management.
>
> Option 5 is the approach taken in this patch. This seemed to be the
> least intrusive approach for 3.1-rc.
>
> The approach in this patch was originally proposed by Ohad Ben-Cohen
> <ohad@wizery.com>. I'm simply writing the commit message and passing
> it along.
>
> ...
>
> Thanks to Luciano Coelho<coelho@ti.com> for reporting the problem.
> Thanks to Ohad Ben-Cohen<ohad@wizery.com> for tracking the problem
> down, generating a temporary workaround, and proposing a patch to deal
> with the problem. Thanks to Rajendra Nayak<rnayak@ti.com> for
> proposing another patch to deal with the problem. Thanks to Felipe
> Balbi<balbi@ti.com> for comments.
>
> 1. Coelho, Luciano<coelho@ti.com>. _Re: Oops on ehci_hcd when
> booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300.
> Posted to the<linux-omap@vger.kernel.org> mailing list. Available
> from (among others)
> http://www.spinics.net/linux/lists/linux-omap/msg55213.html
>
> 2. Munegowda, Keshava<keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
> when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530.
> Posted to the<linux-omap@vger.kernel.org> mailing list. Available
> from (among others)
> http://www.spinics.net/linux/lists/linux-omap/msg55371.html
>
> 3. King, Russell<linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4:
> PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun
> 2011 16:22:49 +0100. Posted to the<linux-omap@vger.kernel.org>
> mailing list. Available from (among others)
> http://www.mail-archive.com/linux-omap at vger.kernel.org/msg51392.html
>
> Signed-off-by: Paul Walmsley<paul@pwsan.com>
> Cc: Luciano Coelho<coelho@ti.com>
> Cc: Ohad Ben-Cohen<ohad@wizery.com>
> Cc: Rajendra Nayak<rnayak@ti.com>
> Cc: Beno?t Cousson<b-cousson@ti.com>
> ---
Thanks for the change log.
Here is my ack if you need one.
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Regards
santosh
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2011-08-20 6:15 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-06 10:37 Oops on ehci_hcd when booting 3.0.0-rc2 on panda Luciano Coelho
2011-06-06 10:44 ` Felipe Balbi
2011-06-06 11:02 ` Felipe Balbi
2011-06-06 11:05 ` Luciano Coelho
2011-08-09 11:26 ` Luciano Coelho
2011-08-09 14:47 ` Felipe Balbi
2011-08-09 15:00 ` Munegowda, Keshava
[not found] ` <CAP05o4LyyjXFHyoug1d-CDS_S2VdEgngT-X4iQ8jwbOJ1S42dg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-09 16:49 ` Munegowda, Keshava
2011-08-09 18:00 ` Luciano Coelho
2011-08-11 8:07 ` Ohad Ben-Cohen
[not found] ` <CAK=WgbatbaSj=U7+SAva4Woh7uaOoCzQck5yjfLvVGLR-UCVHg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-11 8:19 ` Luciano Coelho
2011-08-11 8:21 ` Munegowda, Keshava
2011-08-11 12:03 ` Rajendra Nayak
2011-08-11 11:59 ` Rajendra Nayak
[not found] ` <4E43C41E.1080808-l0cyMroinI0@public.gmane.org>
2011-08-11 12:20 ` Luciano Coelho
2011-08-11 12:33 ` Munegowda, Keshava
2011-08-19 22:48 ` [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda) Paul Walmsley
2011-08-19 22:48 ` Paul Walmsley
2011-08-19 23:08 ` Felipe Balbi
2011-08-19 23:08 ` Felipe Balbi
2011-08-20 3:32 ` Paul Walmsley
2011-08-20 3:32 ` Paul Walmsley
2011-08-20 6:15 ` Santosh
2011-08-20 6:15 ` Santosh
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.