undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Daryl Spitzer]

The good news is that following the instructions in
https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
seems to have solved my proxy problems.  But unfortunately I'm getting
errors after running `bitbake -k poky-image-sato`, following the
"Building an Image" instructions in the Yocto Project Quick Start.  (I
didn't make any changes to the conf/local.conf file generated by
`source poky-bernard-5.0/poky-init-build-env poky-5.0-build`, except
to add the CVS setup lines as directed in the
Working_Behind_a_Network_Proxy wiki page.)  When I repeat `bitbake -k
poky-image-sato` I believe I get the same results.

Here's the output, up to and including the first error:


Loading cache...done.
Loaded 980 entries from dependency cache.
Parsing recipes...done.
Parsing of 783 .bb files complete (772 cached, 11 parsed). 991
targets, 11 skipped, 0 masked, 0 errors.

OE Build Configuration:
BB_VERSION        = "1.11.0"
METADATA_BRANCH   = "<unknown>"
METADATA_REVISION = "<unknown>"
TARGET_ARCH       = "i586"
TARGET_OS         = "linux"
MACHINE           = "qemux86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.0"
TARGET_FPU        = ""

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Running task 632 of 4961 (ID: 387,
/home/daryls/yocto/poky-bernard-5.0/meta/recipes-devtools/perl/perl-native_5.12.2.bb,
do_compile)
NOTE: package perl-native-5.12.2-r7: task do_compile: Started
ERROR: Function 'do_compile' failed (see
/home/daryls/yocto/poky-5.0-build/tmp/work/x86_64-linux/perl-native-5.12.2-r7/temp/log.do_compile.27994
for further information)
...

----------

And here's the head of log.do_compile.27994:


OTE: make -e MAKEFLAGS=
gcc -L/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath-link,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-O1 -fstack-protector -L/usr/local/lib -o miniperl \
	      gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o
mro.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o
doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o
perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o
\
	    miniperlmain.o opmini.o perlmini.o
util.o: In function `Perl_safesysmalloc':
util.c:(.text+0x558): undefined reference to `pthread_getspecific'
util.o: In function `Perl_safesysrealloc':
util.c:(.text+0x5f0): undefined reference to `pthread_getspecific'
util.o: In function `Perl_croak_nocontext':
util.c:(.text+0x19b6): undefined reference to `pthread_getspecific'

----------

Does this look familiar?  Why would I be getting these errors when
following the Yocto Project Quick Start instructions, without changes?
 Did I miss something?

--
Daryl

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Joshua Lock]

On Tue, 2011-06-07 at 19:41 -0700, Daryl Spitzer wrote:
> The good news is that following the instructions in
> https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
> seems to have solved my proxy problems.  But unfortunately I'm getting
> errors after running `bitbake -k poky-image-sato`, following the
> "Building an Image" instructions in the Yocto Project Quick Start.  (I
> didn't make any changes to the conf/local.conf file generated by
> `source poky-bernard-5.0/poky-init-build-env poky-5.0-build`, except
> to add the CVS setup lines as directed in the
> Working_Behind_a_Network_Proxy wiki page.)  When I repeat `bitbake -k
> poky-image-sato` I believe I get the same results.
> 
> Here's the output, up to and including the first error:
> 
> 
> Loading cache...done.
> Loaded 980 entries from dependency cache.
> Parsing recipes...done.
> Parsing of 783 .bb files complete (772 cached, 11 parsed). 991
> targets, 11 skipped, 0 masked, 0 errors.
> 
> OE Build Configuration:
> BB_VERSION        = "1.11.0"
> METADATA_BRANCH   = "<unknown>"
> METADATA_REVISION = "<unknown>"
> TARGET_ARCH       = "i586"
> TARGET_OS         = "linux"
> MACHINE           = "qemux86"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.0"
> TARGET_FPU        = ""
> 
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> NOTE: Running task 632 of 4961 (ID: 387,
> /home/daryls/yocto/poky-bernard-5.0/meta/recipes-devtools/perl/perl-native_5.12.2.bb,
> do_compile)
> NOTE: package perl-native-5.12.2-r7: task do_compile: Started
> ERROR: Function 'do_compile' failed (see
> /home/daryls/yocto/poky-5.0-build/tmp/work/x86_64-linux/perl-native-5.12.2-r7/temp/log.do_compile.27994
> for further information)
> ...
> 
> ----------
> 
> And here's the head of log.do_compile.27994:
> 
> 
> OTE: make -e MAKEFLAGS=
> gcc -L/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath-link,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-O1 -fstack-protector -L/usr/local/lib -o miniperl \
> 	      gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o
> mro.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o
> doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o
> perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o
> \
> 	    miniperlmain.o opmini.o perlmini.o
> util.o: In function `Perl_safesysmalloc':
> util.c:(.text+0x558): undefined reference to `pthread_getspecific'
> util.o: In function `Perl_safesysrealloc':
> util.c:(.text+0x5f0): undefined reference to `pthread_getspecific'
> util.o: In function `Perl_croak_nocontext':
> util.c:(.text+0x19b6): undefined reference to `pthread_getspecific'
> 
> ----------
> 
> Does this look familiar?  Why would I be getting these errors when
> following the Yocto Project Quick Start instructions, without changes?
>  Did I miss something?

It does not. However this is when trying to build perl-native, i.e. Poky
is trying to build its own version of Perl but linked against your
system libraries etc and is unable to find some pthread functions to
link to.

Can you tell us which distribution/version combination you are using?

Could be that we need to patch perl-native to -lpthread ?

Thanks,
Joshua
-- 
Joshua Lock
        Yocto Build System Monkey
        Intel Open Source Technology Centre

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Gary Thomas]

On 06/07/2011 10:38 PM, Joshua Lock wrote:
> On Tue, 2011-06-07 at 19:41 -0700, Daryl Spitzer wrote:
>> The good news is that following the instructions in
>> https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
>> seems to have solved my proxy problems.  But unfortunately I'm getting
>> errors after running `bitbake -k poky-image-sato`, following the
>> "Building an Image" instructions in the Yocto Project Quick Start.  (I
>> didn't make any changes to the conf/local.conf file generated by
>> `source poky-bernard-5.0/poky-init-build-env poky-5.0-build`, except
>> to add the CVS setup lines as directed in the
>> Working_Behind_a_Network_Proxy wiki page.)  When I repeat `bitbake -k
>> poky-image-sato` I believe I get the same results.
>>
>> Here's the output, up to and including the first error:
>>
>>
>> Loading cache...done.
>> Loaded 980 entries from dependency cache.
>> Parsing recipes...done.
>> Parsing of 783 .bb files complete (772 cached, 11 parsed). 991
>> targets, 11 skipped, 0 masked, 0 errors.
>>
>> OE Build Configuration:
>> BB_VERSION        = "1.11.0"
>> METADATA_BRANCH   = "<unknown>"
>> METADATA_REVISION = "<unknown>"
>> TARGET_ARCH       = "i586"
>> TARGET_OS         = "linux"
>> MACHINE           = "qemux86"
>> DISTRO            = "poky"
>> DISTRO_VERSION    = "1.0"
>> TARGET_FPU        = ""
>>
>> NOTE: Resolving any missing task queue dependencies
>> NOTE: Preparing runqueue
>> NOTE: Executing SetScene Tasks
>> NOTE: Executing RunQueue Tasks
>> NOTE: Running task 632 of 4961 (ID: 387,
>> /home/daryls/yocto/poky-bernard-5.0/meta/recipes-devtools/perl/perl-native_5.12.2.bb,
>> do_compile)
>> NOTE: package perl-native-5.12.2-r7: task do_compile: Started
>> ERROR: Function 'do_compile' failed (see
>> /home/daryls/yocto/poky-5.0-build/tmp/work/x86_64-linux/perl-native-5.12.2-r7/temp/log.do_compile.27994
>> for further information)
>> ...
>>
>> ----------
>>
>> And here's the head of log.do_compile.27994:
>>
>>
>> OTE: make -e MAKEFLAGS=
>> gcc -L/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-rpath-link,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-rpath,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-O1 -fstack-protector -L/usr/local/lib -o miniperl \
>> 	      gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o
>> mro.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o
>> doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o
>> perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o
>> \
>> 	    miniperlmain.o opmini.o perlmini.o
>> util.o: In function `Perl_safesysmalloc':
>> util.c:(.text+0x558): undefined reference to `pthread_getspecific'
>> util.o: In function `Perl_safesysrealloc':
>> util.c:(.text+0x5f0): undefined reference to `pthread_getspecific'
>> util.o: In function `Perl_croak_nocontext':
>> util.c:(.text+0x19b6): undefined reference to `pthread_getspecific'
>>
>> ----------
>>
>> Does this look familiar?  Why would I be getting these errors when
>> following the Yocto Project Quick Start instructions, without changes?
>>   Did I miss something?
>
> It does not. However this is when trying to build perl-native, i.e. Poky
> is trying to build its own version of Perl but linked against your
> system libraries etc and is unable to find some pthread functions to
> link to.
>
> Can you tell us which distribution/version combination you are using?
>
> Could be that we need to patch perl-native to -lpthread ?

Is your host Ubuntu 11.04 on x86 (not x86_64)?  There was a patch for this
that I'm not sure got back ported into Bernard.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Daryl Spitzer]

>>> Does this look familiar?  Why would I be getting these errors when
>>> following the Yocto Project Quick Start instructions, without changes?
>>>  Did I miss something?
>>
>> It does not. However this is when trying to build perl-native, i.e. Poky
>> is trying to build its own version of Perl but linked against your
>> system libraries etc and is unable to find some pthread functions to
>> link to.
>>
>> Can you tell us which distribution/version combination you are using?
>>
>> Could be that we need to patch perl-native to -lpthread ?
>
> Is your host Ubuntu 11.04 on x86 (not x86_64)?  There was a patch for this
> that I'm not sure got back ported into Bernard.

Oops.  I forgot to provide those details...

My host is Ubuntu 11.04 64 bit:

$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.04
DISTRIB_CODENAME=natty
DISTRIB_DESCRIPTION="Ubuntu 11.04"
$ uname -m
x86_64

I ran `wget http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.tar.bz2`
(as directed in the Yocto Project Quick Start).  Does that 5.0
correspond to Yocto Project 1.0.1?

I found http://bit.ly/lzyY5b (an email on the gumstix-users mailing
list, archived on old.nabble.com), which appears to be the same
problem.  I ran:

$ sudo apt-get install pthread*
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libpthread-stubs0' for regex 'pthread*'
Note, selecting 'libpthread-stubs0-dev' for regex 'pthread*'
libpthread-stubs0 is already the newest version.
libpthread-stubs0 set to manually installed.
libpthread-stubs0-dev is already the newest version.
libpthread-stubs0-dev set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

I'll read through the rest of that thread to see if can find a
solution.  But I thought I'd send this information off in case it
triggers someone to suggest a solution specific to the Yocto Project.

--
Daryl


On Wed, Jun 8, 2011 at 4:17 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 06/07/2011 10:38 PM, Joshua Lock wrote:
>>
>> On Tue, 2011-06-07 at 19:41 -0700, Daryl Spitzer wrote:
>>>
>>> The good news is that following the instructions in
>>> https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
>>> seems to have solved my proxy problems.  But unfortunately I'm getting
>>> errors after running `bitbake -k poky-image-sato`, following the
>>> "Building an Image" instructions in the Yocto Project Quick Start.  (I
>>> didn't make any changes to the conf/local.conf file generated by
>>> `source poky-bernard-5.0/poky-init-build-env poky-5.0-build`, except
>>> to add the CVS setup lines as directed in the
>>> Working_Behind_a_Network_Proxy wiki page.)  When I repeat `bitbake -k
>>> poky-image-sato` I believe I get the same results.
>>>
>>> Here's the output, up to and including the first error:
>>>
>>>
>>> Loading cache...done.
>>> Loaded 980 entries from dependency cache.
>>> Parsing recipes...done.
>>> Parsing of 783 .bb files complete (772 cached, 11 parsed). 991
>>> targets, 11 skipped, 0 masked, 0 errors.
>>>
>>> OE Build Configuration:
>>> BB_VERSION        = "1.11.0"
>>> METADATA_BRANCH   = "<unknown>"
>>> METADATA_REVISION = "<unknown>"
>>> TARGET_ARCH       = "i586"
>>> TARGET_OS         = "linux"
>>> MACHINE           = "qemux86"
>>> DISTRO            = "poky"
>>> DISTRO_VERSION    = "1.0"
>>> TARGET_FPU        = ""
>>>
>>> NOTE: Resolving any missing task queue dependencies
>>> NOTE: Preparing runqueue
>>> NOTE: Executing SetScene Tasks
>>> NOTE: Executing RunQueue Tasks
>>> NOTE: Running task 632 of 4961 (ID: 387,
>>>
>>> /home/daryls/yocto/poky-bernard-5.0/meta/recipes-devtools/perl/perl-native_5.12.2.bb,
>>> do_compile)
>>> NOTE: package perl-native-5.12.2-r7: task do_compile: Started
>>> ERROR: Function 'do_compile' failed (see
>>>
>>> /home/daryls/yocto/poky-5.0-build/tmp/work/x86_64-linux/perl-native-5.12.2-r7/temp/log.do_compile.27994
>>> for further information)
>>> ...
>>>
>>> ----------
>>>
>>> And here's the head of log.do_compile.27994:
>>>
>>>
>>> OTE: make -e MAKEFLAGS=
>>> gcc -L/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>>>
>>> -Wl,-rpath-link,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>>>
>>> -Wl,-rpath,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>>> -Wl,-O1 -fstack-protector -L/usr/local/lib -o miniperl \
>>>              gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o
>>> reentr.o
>>> mro.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o
>>> doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o
>>> perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o
>>> \
>>>            miniperlmain.o opmini.o perlmini.o
>>> util.o: In function `Perl_safesysmalloc':
>>> util.c:(.text+0x558): undefined reference to `pthread_getspecific'
>>> util.o: In function `Perl_safesysrealloc':
>>> util.c:(.text+0x5f0): undefined reference to `pthread_getspecific'
>>> util.o: In function `Perl_croak_nocontext':
>>> util.c:(.text+0x19b6): undefined reference to `pthread_getspecific'
>>>
>>> ----------
>>>
>>> Does this look familiar?  Why would I be getting these errors when
>>> following the Yocto Project Quick Start instructions, without changes?
>>>  Did I miss something?
>>
>> It does not. However this is when trying to build perl-native, i.e. Poky
>> is trying to build its own version of Perl but linked against your
>> system libraries etc and is unable to find some pthread functions to
>> link to.
>>
>> Can you tell us which distribution/version combination you are using?
>>
>> Could be that we need to patch perl-native to -lpthread ?
>
> Is your host Ubuntu 11.04 on x86 (not x86_64)?  There was a patch for this
> that I'm not sure got back ported into Bernard.
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
>

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Daryl Spitzer]

This email (on the gumstix mailing list) describes the problem:
http://sourceforge.net/mailarchive/message.php?msg_id=27373548.  libc
has moved in Ubuntu 11.04.

Later in that thread is a link to this OE patch:
http://patches.openembedded.org/patch/1659/.  Since I'm a Yocto and OE
newbie, it's not clear to me if this patch can be applied to Yocto
Project 1.0.1, and if so, how.

I might be better off installing 10.10 on my machine.  (It's new, so I
don't need to worry about backing up and restoring any files.)  But
then I may be missing out on a learning opportunity and a chance to
help out the community.

Would someone be able to walk me through applying or adapting this
patch to Yocto?

--
Daryl


On Wed, Jun 8, 2011 at 6:48 AM, Daryl Spitzer <daryl.spitzer@gmail.com> wrote:
>>>> Does this look familiar?  Why would I be getting these errors when
>>>> following the Yocto Project Quick Start instructions, without changes?
>>>>  Did I miss something?
>>>
>>> It does not. However this is when trying to build perl-native, i.e. Poky
>>> is trying to build its own version of Perl but linked against your
>>> system libraries etc and is unable to find some pthread functions to
>>> link to.
>>>
>>> Can you tell us which distribution/version combination you are using?
>>>
>>> Could be that we need to patch perl-native to -lpthread ?
>>
>> Is your host Ubuntu 11.04 on x86 (not x86_64)?  There was a patch for this
>> that I'm not sure got back ported into Bernard.
>
> Oops.  I forgot to provide those details...
>
> My host is Ubuntu 11.04 64 bit:
>
> $ cat /etc/lsb-release
> DISTRIB_ID=Ubuntu
> DISTRIB_RELEASE=11.04
> DISTRIB_CODENAME=natty
> DISTRIB_DESCRIPTION="Ubuntu 11.04"
> $ uname -m
> x86_64
>
> I ran `wget http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.tar.bz2`
> (as directed in the Yocto Project Quick Start).  Does that 5.0
> correspond to Yocto Project 1.0.1?
>
> I found http://bit.ly/lzyY5b (an email on the gumstix-users mailing
> list, archived on old.nabble.com), which appears to be the same
> problem.  I ran:
>
> $ sudo apt-get install pthread*
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> Note, selecting 'libpthread-stubs0' for regex 'pthread*'
> Note, selecting 'libpthread-stubs0-dev' for regex 'pthread*'
> libpthread-stubs0 is already the newest version.
> libpthread-stubs0 set to manually installed.
> libpthread-stubs0-dev is already the newest version.
> libpthread-stubs0-dev set to manually installed.
> 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
>
> I'll read through the rest of that thread to see if can find a
> solution.  But I thought I'd send this information off in case it
> triggers someone to suggest a solution specific to the Yocto Project.
>
> --
> Daryl
>
>
> On Wed, Jun 8, 2011 at 4:17 AM, Gary Thomas <gary@mlbassoc.com> wrote:
>> On 06/07/2011 10:38 PM, Joshua Lock wrote:
>>>
>>> On Tue, 2011-06-07 at 19:41 -0700, Daryl Spitzer wrote:
>>>>
>>>> The good news is that following the instructions in
>>>> https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
>>>> seems to have solved my proxy problems.  But unfortunately I'm getting
>>>> errors after running `bitbake -k poky-image-sato`, following the
>>>> "Building an Image" instructions in the Yocto Project Quick Start.  (I
>>>> didn't make any changes to the conf/local.conf file generated by
>>>> `source poky-bernard-5.0/poky-init-build-env poky-5.0-build`, except
>>>> to add the CVS setup lines as directed in the
>>>> Working_Behind_a_Network_Proxy wiki page.)  When I repeat `bitbake -k
>>>> poky-image-sato` I believe I get the same results.
>>>>
>>>> Here's the output, up to and including the first error:
>>>>
>>>>
>>>> Loading cache...done.
>>>> Loaded 980 entries from dependency cache.
>>>> Parsing recipes...done.
>>>> Parsing of 783 .bb files complete (772 cached, 11 parsed). 991
>>>> targets, 11 skipped, 0 masked, 0 errors.
>>>>
>>>> OE Build Configuration:
>>>> BB_VERSION        = "1.11.0"
>>>> METADATA_BRANCH   = "<unknown>"
>>>> METADATA_REVISION = "<unknown>"
>>>> TARGET_ARCH       = "i586"
>>>> TARGET_OS         = "linux"
>>>> MACHINE           = "qemux86"
>>>> DISTRO            = "poky"
>>>> DISTRO_VERSION    = "1.0"
>>>> TARGET_FPU        = ""
>>>>
>>>> NOTE: Resolving any missing task queue dependencies
>>>> NOTE: Preparing runqueue
>>>> NOTE: Executing SetScene Tasks
>>>> NOTE: Executing RunQueue Tasks
>>>> NOTE: Running task 632 of 4961 (ID: 387,
>>>>
>>>> /home/daryls/yocto/poky-bernard-5.0/meta/recipes-devtools/perl/perl-native_5.12.2.bb,
>>>> do_compile)
>>>> NOTE: package perl-native-5.12.2-r7: task do_compile: Started
>>>> ERROR: Function 'do_compile' failed (see
>>>>
>>>> /home/daryls/yocto/poky-5.0-build/tmp/work/x86_64-linux/perl-native-5.12.2-r7/temp/log.do_compile.27994
>>>> for further information)
>>>> ...
>>>>
>>>> ----------
>>>>
>>>> And here's the head of log.do_compile.27994:
>>>>
>>>>
>>>> OTE: make -e MAKEFLAGS=
>>>> gcc -L/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>>>>
>>>> -Wl,-rpath-link,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>>>>
>>>> -Wl,-rpath,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
>>>> -Wl,-O1 -fstack-protector -L/usr/local/lib -o miniperl \
>>>>              gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o
>>>> reentr.o
>>>> mro.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o
>>>> doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o
>>>> perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o
>>>> \
>>>>            miniperlmain.o opmini.o perlmini.o
>>>> util.o: In function `Perl_safesysmalloc':
>>>> util.c:(.text+0x558): undefined reference to `pthread_getspecific'
>>>> util.o: In function `Perl_safesysrealloc':
>>>> util.c:(.text+0x5f0): undefined reference to `pthread_getspecific'
>>>> util.o: In function `Perl_croak_nocontext':
>>>> util.c:(.text+0x19b6): undefined reference to `pthread_getspecific'
>>>>
>>>> ----------
>>>>
>>>> Does this look familiar?  Why would I be getting these errors when
>>>> following the Yocto Project Quick Start instructions, without changes?
>>>>  Did I miss something?
>>>
>>> It does not. However this is when trying to build perl-native, i.e. Poky
>>> is trying to build its own version of Perl but linked against your
>>> system libraries etc and is unable to find some pthread functions to
>>> link to.
>>>
>>> Can you tell us which distribution/version combination you are using?
>>>
>>> Could be that we need to patch perl-native to -lpthread ?
>>
>> Is your host Ubuntu 11.04 on x86 (not x86_64)?  There was a patch for this
>> that I'm not sure got back ported into Bernard.
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas                 |  Consulting for the
>> MLB Associates              |    Embedded world
>> ------------------------------------------------------------
>>
>

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Joshua Lock]

On Wed, 2011-06-08 at 05:17 -0600, Gary Thomas wrote:
> On 06/07/2011 10:38 PM, Joshua Lock wrote:
> > On Tue, 2011-06-07 at 19:41 -0700, Daryl Spitzer wrote:
> >> The good news is that following the instructions in
> >> https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
> >> seems to have solved my proxy problems.  But unfortunately I'm getting
> >> errors after running `bitbake -k poky-image-sato`, following the
> >> "Building an Image" instructions in the Yocto Project Quick Start.  (I
> >> didn't make any changes to the conf/local.conf file generated by
> >> `source poky-bernard-5.0/poky-init-build-env poky-5.0-build`, except
> >> to add the CVS setup lines as directed in the
> >> Working_Behind_a_Network_Proxy wiki page.)  When I repeat `bitbake -k
> >> poky-image-sato` I believe I get the same results.
> >>
> >> Here's the output, up to and including the first error:
> >>
> >>
> >> Loading cache...done.
> >> Loaded 980 entries from dependency cache.
> >> Parsing recipes...done.
> >> Parsing of 783 .bb files complete (772 cached, 11 parsed). 991
> >> targets, 11 skipped, 0 masked, 0 errors.
> >>
> >> OE Build Configuration:
> >> BB_VERSION        = "1.11.0"
> >> METADATA_BRANCH   = "<unknown>"
> >> METADATA_REVISION = "<unknown>"
> >> TARGET_ARCH       = "i586"
> >> TARGET_OS         = "linux"
> >> MACHINE           = "qemux86"
> >> DISTRO            = "poky"
> >> DISTRO_VERSION    = "1.0"
> >> TARGET_FPU        = ""
> >>
> >> NOTE: Resolving any missing task queue dependencies
> >> NOTE: Preparing runqueue
> >> NOTE: Executing SetScene Tasks
> >> NOTE: Executing RunQueue Tasks
> >> NOTE: Running task 632 of 4961 (ID: 387,
> >> /home/daryls/yocto/poky-bernard-5.0/meta/recipes-devtools/perl/perl-native_5.12.2.bb,
> >> do_compile)
> >> NOTE: package perl-native-5.12.2-r7: task do_compile: Started
> >> ERROR: Function 'do_compile' failed (see
> >> /home/daryls/yocto/poky-5.0-build/tmp/work/x86_64-linux/perl-native-5.12.2-r7/temp/log.do_compile.27994
> >> for further information)
> >> ...
> >>
> >> ----------
> >>
> >> And here's the head of log.do_compile.27994:
> >>
> >>
> >> OTE: make -e MAKEFLAGS=
> >> gcc -L/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
> >> -Wl,-rpath-link,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
> >> -Wl,-rpath,/home/daryls/yocto/poky-5.0-build/tmp/sysroots/x86_64-linux/usr/lib
> >> -Wl,-O1 -fstack-protector -L/usr/local/lib -o miniperl \
> >> 	      gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o
> >> mro.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o
> >> doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o
> >> perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o
> >> \
> >> 	    miniperlmain.o opmini.o perlmini.o
> >> util.o: In function `Perl_safesysmalloc':
> >> util.c:(.text+0x558): undefined reference to `pthread_getspecific'
> >> util.o: In function `Perl_safesysrealloc':
> >> util.c:(.text+0x5f0): undefined reference to `pthread_getspecific'
> >> util.o: In function `Perl_croak_nocontext':
> >> util.c:(.text+0x19b6): undefined reference to `pthread_getspecific'
> >>
> >> ----------
> >>
> >> Does this look familiar?  Why would I be getting these errors when
> >> following the Yocto Project Quick Start instructions, without changes?
> >>   Did I miss something?
> >
> > It does not. However this is when trying to build perl-native, i.e. Poky
> > is trying to build its own version of Perl but linked against your
> > system libraries etc and is unable to find some pthread functions to
> > link to.
> >
> > Can you tell us which distribution/version combination you are using?
> >
> > Could be that we need to patch perl-native to -lpthread ?
> 
> Is your host Ubuntu 11.04 on x86 (not x86_64)?  There was a patch for this
> that I'm not sure got back ported into Bernard.

Gary, you are spot on. Looks like the patch *did* make it into the
Bernard point release (5.0.1) too!

http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?h=bernard&id=841d0845552ae5855955f88ce446d8ac675660a5

Regards,
Joshua
-- 
Joshua Lock
        Yocto Build System Monkey
        Intel Open Source Technology Centre

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Joshua Lock]

On Wed, 2011-06-08 at 06:48 -0700, Daryl Spitzer wrote:
> >>> Does this look familiar?  Why would I be getting these errors when
> >>> following the Yocto Project Quick Start instructions, without changes?
> >>>  Did I miss something?
> >>
> >> It does not. However this is when trying to build perl-native, i.e. Poky
> >> is trying to build its own version of Perl but linked against your
> >> system libraries etc and is unable to find some pthread functions to
> >> link to.
> >>
> >> Can you tell us which distribution/version combination you are using?
> >>
> >> Could be that we need to patch perl-native to -lpthread ?
> >
> > Is your host Ubuntu 11.04 on x86 (not x86_64)?  There was a patch for this
> > that I'm not sure got back ported into Bernard.
> 
> Oops.  I forgot to provide those details...
> 
> My host is Ubuntu 11.04 64 bit:
> 
> $ cat /etc/lsb-release
> DISTRIB_ID=Ubuntu
> DISTRIB_RELEASE=11.04
> DISTRIB_CODENAME=natty
> DISTRIB_DESCRIPTION="Ubuntu 11.04"
> $ uname -m
> x86_64
> 
> I ran `wget http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.tar.bz2`
> (as directed in the Yocto Project Quick Start).  Does that 5.0
> correspond to Yocto Project 1.0.1?

Hi Daryl,

Looks like we fixed this issue in our recent point release. Could you
try
http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.1.tar.bz2 ? 

Cheers,
Joshua
-- 
Joshua Lock
        Yocto Build System Monkey
        Intel Open Source Technology Centre

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Daryl Spitzer]

> Looks like we fixed this issue in our recent point release. Could you
> try http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.1.tar.bz2 ?

I tried it, and am getting what I think is an unrelated error.  I'll
start a new thread for that.

Shouldn't documentation references to
"http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.tar.bz2"
be changed to "http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.1.tar.bz"
(such as in http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html)?

Thanks Joshua and Gary.

--
Daryl


On Wed, Jun 8, 2011 at 4:57 PM, Joshua Lock <josh@linux.intel.com> wrote:
> On Wed, 2011-06-08 at 06:48 -0700, Daryl Spitzer wrote:
>> >>> Does this look familiar?  Why would I be getting these errors when
>> >>> following the Yocto Project Quick Start instructions, without changes?
>> >>>  Did I miss something?
>> >>
>> >> It does not. However this is when trying to build perl-native, i.e. Poky
>> >> is trying to build its own version of Perl but linked against your
>> >> system libraries etc and is unable to find some pthread functions to
>> >> link to.
>> >>
>> >> Can you tell us which distribution/version combination you are using?
>> >>
>> >> Could be that we need to patch perl-native to -lpthread ?
>> >
>> > Is your host Ubuntu 11.04 on x86 (not x86_64)?  There was a patch for this
>> > that I'm not sure got back ported into Bernard.
>>
>> Oops.  I forgot to provide those details...
>>
>> My host is Ubuntu 11.04 64 bit:
>>
>> $ cat /etc/lsb-release
>> DISTRIB_ID=Ubuntu
>> DISTRIB_RELEASE=11.04
>> DISTRIB_CODENAME=natty
>> DISTRIB_DESCRIPTION="Ubuntu 11.04"
>> $ uname -m
>> x86_64
>>
>> I ran `wget http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.tar.bz2`
>> (as directed in the Yocto Project Quick Start).  Does that 5.0
>> correspond to Yocto Project 1.0.1?
>
> Hi Daryl,
>
> Looks like we fixed this issue in our recent point release. Could you
> try
> http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.1.tar.bz2 ?
>
> Cheers,
> Joshua
> --
> Joshua Lock
>        Yocto Build System Monkey
>        Intel Open Source Technology Centre
>
>

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Joshua Lock]

On Thu, 2011-06-09 at 11:17 -0700, Daryl Spitzer wrote:
> > Looks like we fixed this issue in our recent point release. Could you
> > try http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.1.tar.bz2 ?
> 
> I tried it, and am getting what I think is an unrelated error.  I'll
> start a new thread for that.
> 
> Shouldn't documentation references to
> "http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.tar.bz2"
> be changed to "http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.1.tar.bz"
> (such as in http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html)?

You are right Daryl, apologies for any inconvenience. I've filed a bug
with a patch attached for the Quick Start doc.

http://bugzilla.yoctoproject.org/show_bug.cgi?id=1153

Regards,
Joshua
-- 
Joshua Lock
        Yocto Build System Monkey
        Intel Open Source Technology Centre

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Daryl Spitzer]

Thanks Joshua.  I assume that
http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html
won't be updated until the next release (if this makes it into the
next release)?  And the patch should then be updated to match the new
version numbers?

--
Daryl


On Thu, Jun 9, 2011 at 3:52 PM, Joshua Lock <josh@linux.intel.com> wrote:
> On Thu, 2011-06-09 at 11:17 -0700, Daryl Spitzer wrote:
>> > Looks like we fixed this issue in our recent point release. Could you
>> > try http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.1.tar.bz2 ?
>>
>> I tried it, and am getting what I think is an unrelated error.  I'll
>> start a new thread for that.
>>
>> Shouldn't documentation references to
>> "http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.tar.bz2"
>> be changed to "http://www.yoctoproject.org/downloads/poky/poky-bernard-5.0.1.tar.bz"
>> (such as in http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html)?
>
> You are right Daryl, apologies for any inconvenience. I've filed a bug
> with a patch attached for the Quick Start doc.
>
> http://bugzilla.yoctoproject.org/show_bug.cgi?id=1153
>
> Regards,
> Joshua
> --
> Joshua Lock
>        Yocto Build System Monkey
>        Intel Open Source Technology Centre
>
>

Re: undefined reference to `pthread_getspecific' in perl-native_5.12.2.bb task do_compile?

[Joshua Lock]

On Fri, 2011-06-10 at 14:43 -0700, Daryl Spitzer wrote:
> Thanks Joshua.  I assume that
> http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html
> won't be updated until the next release (if this makes it into the
> next release)?  And the patch should then be updated to match the new
> version numbers?

It's my intention to get the document updated ASAP so that we don't
confuse anyone else as to which version to download.

Regards,
Joshua
-- 
Joshua Lock
        Yocto Build System Monkey
        Intel Open Source Technology Centre