* [U-Boot] [PATCH 1/2] dm3730: enable dpll5
@ 2011-06-10 22:21 Eric Bénard
2011-06-10 22:21 ` [U-Boot] [PATCH 2/2] beagleboard: enable HUB power on XM boards Eric Bénard
2011-08-12 19:47 ` [U-Boot] [PATCH 1/2] dm3730: enable dpll5 Jason Kridner
0 siblings, 2 replies; 4+ messages in thread
From: Eric Bénard @ 2011-06-10 22:21 UTC (permalink / raw)
To: u-boot
which is used to provide 120MHz to USB EHCI
This allows EHCI to work on BeagleBoard XM
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
arch/arm/cpu/armv7/omap3/clock.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 3d38d08..6a9edcf 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -579,6 +579,7 @@ void prcm_init(void)
dpll3_init_36xx(0, clk_index);
dpll4_init_36xx(0, clk_index);
+ dpll5_init_34xx(0, clk_index);
iva_init_36xx(0, clk_index);
mpu_init_36xx(0, clk_index);
--
1.7.0.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 2/2] beagleboard: enable HUB power on XM boards
2011-06-10 22:21 [U-Boot] [PATCH 1/2] dm3730: enable dpll5 Eric Bénard
@ 2011-06-10 22:21 ` Eric Bénard
2011-08-12 19:47 ` [U-Boot] [PATCH 1/2] dm3730: enable dpll5 Jason Kridner
1 sibling, 0 replies; 4+ messages in thread
From: Eric Bénard @ 2011-06-10 22:21 UTC (permalink / raw)
To: u-boot
LEDA needs to be at level 0 to enable HUB_3V3
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
board/ti/beagle/beagle.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ab50514..7509916 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -299,7 +299,10 @@ int misc_init_r(void)
setenv(expansion_config.env_var, expansion_config.env_setting);
twl4030_power_init();
- twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+ if (get_board_revision() < REVISION_C4)
+ twl4030_led_init(TWL4030_LED_LEDEN_LEDBON); /* Enable HUB PWR */
+ else
+ twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
/* Configure GPIOs to output */
writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
--
1.7.0.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 1/2] dm3730: enable dpll5
2011-06-10 22:21 [U-Boot] [PATCH 1/2] dm3730: enable dpll5 Eric Bénard
2011-06-10 22:21 ` [U-Boot] [PATCH 2/2] beagleboard: enable HUB power on XM boards Eric Bénard
@ 2011-08-12 19:47 ` Jason Kridner
2011-08-18 1:10 ` Joel A Fernandes
1 sibling, 1 reply; 4+ messages in thread
From: Jason Kridner @ 2011-08-12 19:47 UTC (permalink / raw)
To: u-boot
On Fri, Jun 10, 2011 at 6:21 PM, Eric B?nard <eric@eukrea.com> wrote:
> which is used to provide 120MHz to USB EHCI
> This allows EHCI to work on BeagleBoard XM
>
> Signed-off-by: Eric B?nard <eric@eukrea.com>
Acked-by: Jason Kridner <jkridner@beagleboard.org>
We've tested this at TI. Thanks for the patch. Sandeep, can you
apply this to the TI staging tree?
There would be more consistency with a dpll5_init_36xx() function, but
that would seem like a waste of code space. Is there a reason we'd
need to use "ptr = (struct dpll_per_36x_param
*)get_36x_per_dpll_param();"?
> ---
> ?arch/arm/cpu/armv7/omap3/clock.c | ? ?1 +
> ?1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
> index 3d38d08..6a9edcf 100644
> --- a/arch/arm/cpu/armv7/omap3/clock.c
> +++ b/arch/arm/cpu/armv7/omap3/clock.c
> @@ -579,6 +579,7 @@ void prcm_init(void)
>
> ? ? ? ? ? ? ? ?dpll3_init_36xx(0, clk_index);
> ? ? ? ? ? ? ? ?dpll4_init_36xx(0, clk_index);
> + ? ? ? ? ? ? ? dpll5_init_34xx(0, clk_index);
> ? ? ? ? ? ? ? ?iva_init_36xx(0, clk_index);
> ? ? ? ? ? ? ? ?mpu_init_36xx(0, clk_index);
>
> --
> 1.7.0.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 1/2] dm3730: enable dpll5
2011-08-12 19:47 ` [U-Boot] [PATCH 1/2] dm3730: enable dpll5 Jason Kridner
@ 2011-08-18 1:10 ` Joel A Fernandes
0 siblings, 0 replies; 4+ messages in thread
From: Joel A Fernandes @ 2011-08-18 1:10 UTC (permalink / raw)
To: u-boot
On Fri, Aug 12, 2011 at 2:47 PM, Jason Kridner <jkridner@beagleboard.org> wrote:
> On Fri, Jun 10, 2011 at 6:21 PM, Eric B?nard <eric@eukrea.com> wrote:
>> which is used to provide 120MHz to USB EHCI
>> This allows EHCI to work on BeagleBoard XM
>>
>> Signed-off-by: Eric B?nard <eric@eukrea.com>
>
> Acked-by: Jason Kridner <jkridner@beagleboard.org>
>
> We've tested this at TI. ?Thanks for the patch. ?Sandeep, can you
> apply this to the TI staging tree?
Hi Eric, Jason,
Could you update the patchwork status for this possibly delegating it
to Sandeep for inclusion in the TI tree?
http://patchwork.ozlabs.org/patch/99955/
thanks,
Joel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-08-18 1:10 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-10 22:21 [U-Boot] [PATCH 1/2] dm3730: enable dpll5 Eric Bénard
2011-06-10 22:21 ` [U-Boot] [PATCH 2/2] beagleboard: enable HUB power on XM boards Eric Bénard
2011-08-12 19:47 ` [U-Boot] [PATCH 1/2] dm3730: enable dpll5 Jason Kridner
2011-08-18 1:10 ` Joel A Fernandes
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.