From: Banajit Goswami <banajit.g@samsung.com> To: linux-samsung-soc@vger.kernel.org Cc: kgene.kim@samsung.com, ben-linux@fluff.org, linux-arm-kernel@lists.infradead.org, Banajit Goswami <banajit.g@samsung.com> Subject: [PATCH] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKV310 Date: Wed, 22 Jun 2011 12:11:15 +0530 [thread overview] Message-ID: <1308724875-32724-1-git-send-email-banajit.g@samsung.com> (raw) This patch adds support for LCD backlight using PWM timer for Samsung SMDKV310 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> --- arch/arm/mach-exynos4/Kconfig | 1 + arch/arm/mach-exynos4/mach-smdkv310.c | 43 +++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 1435fc3..9ab53bc 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -128,6 +128,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select EXYNOS4_DEV_PD select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_I2C1 diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 7e3ee6c..b097ef6 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/input.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -29,6 +30,7 @@ #include <plat/sdhci.h> #include <plat/iic.h> #include <plat/pd.h> +#include <plat/gpio-cfg.h> #include <mach/map.h> @@ -172,6 +174,45 @@ static struct i2c_board_info i2c_devs1[] __initdata = { {I2C_BOARD_INFO("wm8994", 0x1a),}, }; +static int smdkv310_backlight_init(struct device *dev) +{ + int ret = 0; + + ret = gpio_request(EXYNOS4_GPD0(1), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPD for PWM-OUT0\n"); + return ret; + } + + /* Configure GPIO pin with EXYNOS4_GPD_0_1_TOUT_0 */ + s3c_gpio_cfgpin(EXYNOS4_GPD0(1), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdkv310_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(EXYNOS4_GPD0(1), S3C_GPIO_OUTPUT); + gpio_free(EXYNOS4_GPD0(1)); +} + +static struct platform_pwm_backlight_data smdkv310_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdkv310_backlight_init, + .exit = smdkv310_backlight_exit, +}; + +static struct platform_device smdkv310_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdkv310_backlight_data, + }, +}; + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -195,6 +236,8 @@ static struct platform_device *smdkv310_devices[] __initdata = { &samsung_asoc_dma, &smdkv310_smsc911x, &smdkv310_pcm_device, + &s3c_device_timer[1], + &smdkv310_backlight_device, }; static void __init smdkv310_smsc911x_init(void) -- 1.6.5.2
WARNING: multiple messages have this Message-ID (diff)
From: banajit.g@samsung.com (Banajit Goswami) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKV310 Date: Wed, 22 Jun 2011 12:11:15 +0530 [thread overview] Message-ID: <1308724875-32724-1-git-send-email-banajit.g@samsung.com> (raw) This patch adds support for LCD backlight using PWM timer for Samsung SMDKV310 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> --- arch/arm/mach-exynos4/Kconfig | 1 + arch/arm/mach-exynos4/mach-smdkv310.c | 43 +++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 1435fc3..9ab53bc 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -128,6 +128,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select EXYNOS4_DEV_PD select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_I2C1 diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 7e3ee6c..b097ef6 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/input.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -29,6 +30,7 @@ #include <plat/sdhci.h> #include <plat/iic.h> #include <plat/pd.h> +#include <plat/gpio-cfg.h> #include <mach/map.h> @@ -172,6 +174,45 @@ static struct i2c_board_info i2c_devs1[] __initdata = { {I2C_BOARD_INFO("wm8994", 0x1a),}, }; +static int smdkv310_backlight_init(struct device *dev) +{ + int ret = 0; + + ret = gpio_request(EXYNOS4_GPD0(1), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPD for PWM-OUT0\n"); + return ret; + } + + /* Configure GPIO pin with EXYNOS4_GPD_0_1_TOUT_0 */ + s3c_gpio_cfgpin(EXYNOS4_GPD0(1), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdkv310_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(EXYNOS4_GPD0(1), S3C_GPIO_OUTPUT); + gpio_free(EXYNOS4_GPD0(1)); +} + +static struct platform_pwm_backlight_data smdkv310_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdkv310_backlight_init, + .exit = smdkv310_backlight_exit, +}; + +static struct platform_device smdkv310_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdkv310_backlight_data, + }, +}; + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -195,6 +236,8 @@ static struct platform_device *smdkv310_devices[] __initdata = { &samsung_asoc_dma, &smdkv310_smsc911x, &smdkv310_pcm_device, + &s3c_device_timer[1], + &smdkv310_backlight_device, }; static void __init smdkv310_smsc911x_init(void) -- 1.6.5.2
next reply other threads:[~2011-06-22 6:41 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-06-22 6:41 Banajit Goswami [this message] 2011-06-22 6:41 ` [PATCH] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKV310 Banajit Goswami 2011-06-22 6:56 JinGoo Han [not found] ` <BANLkTi=SqB7NHQ7vStegFgQjihoQRmzVCw@mail.gmail.com> 2011-06-23 10:12 ` Banajit Goswami 2011-06-23 10:12 ` Banajit Goswami 2011-06-23 11:44 ` Kukjin Kim 2011-06-23 11:44 ` Kukjin Kim 2011-06-23 13:53 ` Banajit Goswami 2011-06-23 13:53 ` Banajit Goswami
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1308724875-32724-1-git-send-email-banajit.g@samsung.com \ --to=banajit.g@samsung.com \ --cc=ben-linux@fluff.org \ --cc=kgene.kim@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-samsung-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.