* [PATCH v2] conf/bitbake: improve compression image handling and adapt linux-kexecboot.inc
@ 2011-06-22 15:57 Denis 'GNUtoo' Carikli
2011-06-22 16:00 ` Phil Blundell
0 siblings, 1 reply; 7+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-06-22 15:57 UTC (permalink / raw)
To: openembedded-devel; +Cc: Otavio Salvador
From: Otavio Salvador <otavio@ossystems.com.br>
* add GZIP_COMPRESSION_LEVEL
* add BZIP2_COMPRESSION_LEVEL
* use xz-native to generate lzma images
Kexecboot.inc needed to be adjusted in order to reflect the dependency
change from lzma-native to xz-native
The initramfs.cpio.gz were tested with linux-kexecboot on nokia900.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
---
conf/bitbake.conf | 22 ++++++++++++----------
recipes/linux/linux-kexecboot.inc | 4 ++--
2 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/conf/bitbake.conf b/conf/bitbake.conf
index 17a494d..299537a 100644
--- a/conf/bitbake.conf
+++ b/conf/bitbake.conf
@@ -150,6 +150,8 @@ QEMU_OPTIONS_armv7a = "-cpu cortex-a8"
# default compression levels
XZ_COMPRESSION_LEVEL ?= "-e -9"
LZMA_COMPRESSION_LEVEL ?= "-e -9"
+GZIP_COMPRESSION_LEVEL ?= "-9"
+BZIP2_COMPRESSION_LEVEL ?= "-9"
# default integrity check
XZ_INTEGRITY_CHECK ?= "crc32"
@@ -384,14 +386,14 @@ IMAGE_CMD_jffs2 = "mkfs.jffs2 -x lzo --root=${IMAGE_ROOTFS} --faketime --output=
IMAGE_CMD_yaffs2 = "mkyaffs2image ${EXTRA_IMAGECMD} ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.yaffs2"
IMAGE_CMD_cramfs = "mkcramfs ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cramfs ${EXTRA_IMAGECMD}"
IMAGE_CMD_ext2 = "genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}"
-IMAGE_CMD_ext2.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.gz"
-IMAGE_CMD_ext2.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}; bzip2 -f -9 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.bz2"
+IMAGE_CMD_ext2.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}; gzip -f ${GZIP_COMPRESSION_LEVEL} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.gz"
+IMAGE_CMD_ext2.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}; bzip2 -f ${BZIP2_COMPRESSION_LEVEL} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.bz2"
IMAGE_CMD_ext3 = "genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
-IMAGE_CMD_ext3.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3.gz"
-IMAGE_CMD_ext3.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3; bzip2 -f -9 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3.bz2"
+IMAGE_CMD_ext3.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3; gzip -f ${GZIP_COMPRESSION_LEVEL} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3.gz"
+IMAGE_CMD_ext3.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3; bzip2 -f ${BZIP2_COMPRESSION_LEVEL} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3.bz2"
IMAGE_CMD_ext4 = "genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4; set +e; e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac;"
-IMAGE_CMD_ext4.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4; set +e;e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4.gz"
-IMAGE_CMD_ext4.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4; set +e; e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac; bzip2 -f -9 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4.bz2"
+IMAGE_CMD_ext4.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4; set +e;e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac; gzip -f ${GZIP_COMPRESSION_LEVEL} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4.gz"
+IMAGE_CMD_ext4.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4; set +e; e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac; bzip2 -f ${BZIP2_COMPRESSION_LEVEL} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4.bz2"
IMAGE_CMD_ext4.xz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.xz; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4; set +e; e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac; xz -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4 > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4.xz ; rm -f ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4 ; rmdir ${DEPLOY_DIR_IMAGE}/tmp.xz"
IMAGE_CMD_squashfs = "mksquashfs ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.squashfs ${EXTRA_IMAGECMD} -noappend"
@@ -401,10 +403,10 @@ IMAGE_CMD_tar.gz = "cd ${IMAGE_ROOTFS} && tar -zcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_
IMAGE_CMD_tar.bz2 = "cd ${IMAGE_ROOTFS} && tar -jcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.bz2 ."
IMAGE_CMD_tar.xz = "cd ${IMAGE_ROOTFS} && tar --xz -cvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.xz ."
IMAGE_CMD_cpio = "cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio) ${EXTRA_IMAGECMD}"
-IMAGE_CMD_cpio.gz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}"
+IMAGE_CMD_cpio.gz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c ${GZIP_COMPRESSION_LEVEL} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}"
IMAGE_CMD_cpio.xz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.xz) ${EXTRA_IMAGECMD}"
-IMAGE_CMD_cpio.gz.u-boot = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}; mkimage -A ${UBOOT_ARCH} -O linux -T ramdisk -C gzip -n ${IMAGE_NAME} -d ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz.u-boot"
-IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | lzma -c ${LZMA_COMPRESSION_LEVEL} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
+IMAGE_CMD_cpio.gz.u-boot = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c ${GZIP_COMPRESSION_LEVEL} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}; mkimage -A ${UBOOT_ARCH} -O linux -T ramdisk -C gzip -n ${IMAGE_NAME} -d ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz.u-boot"
+IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz --format=lzma -c ${LZMA_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
IMAGE_CMD_ubi = "echo \[ubifs\] > ubinize.cfg ; echo mode=ubi >> ubinize.cfg ; echo image=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img >> ubinize.cfg ; echo vol_id=0 >> ubinize.cfg ; echo vol_type=dynamic >> ubinize.cfg ; echo vol_name=${UBI_VOLNAME} >> ubinize.cfg ; echo vol_flags=autoresize >> ubinize.cfg;mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS} && ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${UBINIZE_ARGS} ubinize.cfg"
IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS}"
@@ -435,7 +437,7 @@ IMAGE_DEPENDS_ext4.gz = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext4.bz2 = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext4.xz = "genext2fs-native e2fsprogs-native xz-native"
IMAGE_DEPENDS_cpio.gz.u-boot = "u-boot-mkimage-native"
-IMAGE_DEPENDS_cpio.lzma = "lzma-native"
+IMAGE_DEPENDS_cpio.lzma = "xz-native"
IMAGE_DEPENDS_cpio.xz = "xz-native"
IMAGE_DEPENDS_squashfs = "squashfs-tools-native"
IMAGE_DEPENDS_squashfs-lzma = "squashfs-tools-native"
diff --git a/recipes/linux/linux-kexecboot.inc b/recipes/linux/linux-kexecboot.inc
index efa45f2..d1bf6aa 100644
--- a/recipes/linux/linux-kexecboot.inc
+++ b/recipes/linux/linux-kexecboot.inc
@@ -1,5 +1,5 @@
# We set INC_PR here, since a change in the kexecboot recipe will need to get picked up by *all* the kernels:
-INC_PR = "r39"
+INC_PR = "r40"
inherit kernel siteinfo
@@ -57,7 +57,7 @@ def kernel_version_less_or_equal(variable, checkvalue, truevalue, falsevalue, d)
# force lzma compression for kernel (linux-kexecboot >= 2.6.32)
# force lzma compression for initramfs (linux-kexecboot >= 2.6.30)
-DEPENDS += '${@kernel_version_less_or_equal("PV", "2.6.29", "", "lzma-native", d)}'
+DEPENDS += '${@kernel_version_less_or_equal("PV", "2.6.29", "", "xz-native", d)}'
KERNEL_COMPRESSION = '${@kernel_version_less_or_equal("PV", "2.6.31", "", "CONFIG_KERNEL_LZMA=y", d)}'
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2] conf/bitbake: improve compression image handling and adapt linux-kexecboot.inc
2011-06-22 15:57 [PATCH v2] conf/bitbake: improve compression image handling and adapt linux-kexecboot.inc Denis 'GNUtoo' Carikli
@ 2011-06-22 16:00 ` Phil Blundell
2011-06-22 17:00 ` [PATCH v3] " Denis 'GNUtoo' Carikli
0 siblings, 1 reply; 7+ messages in thread
From: Phil Blundell @ 2011-06-22 16:00 UTC (permalink / raw)
To: openembedded-devel
On Wed, 2011-06-22 at 17:57 +0200, Denis 'GNUtoo' Carikli wrote:
> @@ -150,6 +150,8 @@ QEMU_OPTIONS_armv7a = "-cpu cortex-a8"
> # default compression levels
> XZ_COMPRESSION_LEVEL ?= "-e -9"
> LZMA_COMPRESSION_LEVEL ?= "-e -9"
> +GZIP_COMPRESSION_LEVEL ?= "-9"
> +BZIP2_COMPRESSION_LEVEL ?= "-9"
I still dislike this for the same reasons as before. The lzma bits are
fine.
p.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3] conf/bitbake: improve compression image handling and adapt linux-kexecboot.inc
2011-06-22 16:00 ` Phil Blundell
@ 2011-06-22 17:00 ` Denis 'GNUtoo' Carikli
2011-06-22 21:55 ` Andrea Adami
0 siblings, 1 reply; 7+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-06-22 17:00 UTC (permalink / raw)
To: openembedded-devel; +Cc: Otavio Salvador
From: Otavio Salvador <otavio@ossystems.com.br>
We now use xz-native to generate lzma images
Kexecboot.inc needed to be adjusted in order to reflect the dependency
change from lzma-native to xz-native
The initramfs.cpio.gz were tested with linux-kexecboot on nokia900.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
---
conf/bitbake.conf | 4 ++--
recipes/linux/linux-kexecboot.inc | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/conf/bitbake.conf b/conf/bitbake.conf
index 17a494d..bbf86c0 100644
--- a/conf/bitbake.conf
+++ b/conf/bitbake.conf
@@ -404,7 +404,7 @@ IMAGE_CMD_cpio = "cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc >${DEPLOY_DIR_
IMAGE_CMD_cpio.gz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}"
IMAGE_CMD_cpio.xz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.xz) ${EXTRA_IMAGECMD}"
IMAGE_CMD_cpio.gz.u-boot = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}; mkimage -A ${UBOOT_ARCH} -O linux -T ramdisk -C gzip -n ${IMAGE_NAME} -d ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz.u-boot"
-IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | lzma -c ${LZMA_COMPRESSION_LEVEL} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
+IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz --format=lzma -c ${LZMA_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
IMAGE_CMD_ubi = "echo \[ubifs\] > ubinize.cfg ; echo mode=ubi >> ubinize.cfg ; echo image=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img >> ubinize.cfg ; echo vol_id=0 >> ubinize.cfg ; echo vol_type=dynamic >> ubinize.cfg ; echo vol_name=${UBI_VOLNAME} >> ubinize.cfg ; echo vol_flags=autoresize >> ubinize.cfg;mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS} && ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${UBINIZE_ARGS} ubinize.cfg"
IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS}"
@@ -435,7 +435,7 @@ IMAGE_DEPENDS_ext4.gz = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext4.bz2 = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext4.xz = "genext2fs-native e2fsprogs-native xz-native"
IMAGE_DEPENDS_cpio.gz.u-boot = "u-boot-mkimage-native"
-IMAGE_DEPENDS_cpio.lzma = "lzma-native"
+IMAGE_DEPENDS_cpio.lzma = "xz-native"
IMAGE_DEPENDS_cpio.xz = "xz-native"
IMAGE_DEPENDS_squashfs = "squashfs-tools-native"
IMAGE_DEPENDS_squashfs-lzma = "squashfs-tools-native"
diff --git a/recipes/linux/linux-kexecboot.inc b/recipes/linux/linux-kexecboot.inc
index efa45f2..d1bf6aa 100644
--- a/recipes/linux/linux-kexecboot.inc
+++ b/recipes/linux/linux-kexecboot.inc
@@ -1,5 +1,5 @@
# We set INC_PR here, since a change in the kexecboot recipe will need to get picked up by *all* the kernels:
-INC_PR = "r39"
+INC_PR = "r40"
inherit kernel siteinfo
@@ -57,7 +57,7 @@ def kernel_version_less_or_equal(variable, checkvalue, truevalue, falsevalue, d)
# force lzma compression for kernel (linux-kexecboot >= 2.6.32)
# force lzma compression for initramfs (linux-kexecboot >= 2.6.30)
-DEPENDS += '${@kernel_version_less_or_equal("PV", "2.6.29", "", "lzma-native", d)}'
+DEPENDS += '${@kernel_version_less_or_equal("PV", "2.6.29", "", "xz-native", d)}'
KERNEL_COMPRESSION = '${@kernel_version_less_or_equal("PV", "2.6.31", "", "CONFIG_KERNEL_LZMA=y", d)}'
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3] conf/bitbake: improve compression image handling and adapt linux-kexecboot.inc
2011-06-22 17:00 ` [PATCH v3] " Denis 'GNUtoo' Carikli
@ 2011-06-22 21:55 ` Andrea Adami
2011-06-23 19:29 ` [PATCH v4] " Denis 'GNUtoo' Carikli
0 siblings, 1 reply; 7+ messages in thread
From: Andrea Adami @ 2011-06-22 21:55 UTC (permalink / raw)
To: openembedded-devel
...
-IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} &&
(find . | cpio -o -H newc | lzma -c ${LZMA_COMPRESSION_LEVEL}
>${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma)
${EXTRA_IMAGECMD}"
+IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} &&
(find . | cpio -o -H newc | xz --format=lzma -c
${LZMA_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK}
${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
Hello, thx for refreshing the patch.
being that we have two vars:
XZ_COMPRESSION_LEVEL ?= "-e -9"
LZMA_COMPRESSION_LEVEL ?= "-e -9"
wouldn't it better to use XZ_COMPRESSION_LEVEL?
Remember (man xz) that lzma-utils '-9' is equivalent to xz-utils '-8'
in terms of dictionary/ram needed for decompression.
Regards
Andrea
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v4] conf/bitbake: improve compression image handling and adapt linux-kexecboot.inc
2011-06-22 21:55 ` Andrea Adami
@ 2011-06-23 19:29 ` Denis 'GNUtoo' Carikli
2011-06-23 21:28 ` [PATCH v5] conf/bitbake: unbreak and improve lzma image compression " Denis 'GNUtoo' Carikli
0 siblings, 1 reply; 7+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-06-23 19:29 UTC (permalink / raw)
To: openembedded-devel; +Cc: Otavio Salvador
From: Otavio Salvador <otavio@ossystems.com.br>
We now use xz-native to generate lzma images
Kexecboot.inc needed to be adjusted in order to reflect the dependency
change from lzma-native to xz-native
The initramfs.cpio.gz were tested with linux-kexecboot on nokia900.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
---
conf/bitbake.conf | 5 ++---
recipes/linux/linux-kexecboot.inc | 4 ++--
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/conf/bitbake.conf b/conf/bitbake.conf
index 17a494d..66dfaba 100644
--- a/conf/bitbake.conf
+++ b/conf/bitbake.conf
@@ -149,7 +149,6 @@ QEMU_OPTIONS_armv7a = "-cpu cortex-a8"
# default compression levels
XZ_COMPRESSION_LEVEL ?= "-e -9"
-LZMA_COMPRESSION_LEVEL ?= "-e -9"
# default integrity check
XZ_INTEGRITY_CHECK ?= "crc32"
@@ -404,7 +403,7 @@ IMAGE_CMD_cpio = "cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc >${DEPLOY_DIR_
IMAGE_CMD_cpio.gz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}"
IMAGE_CMD_cpio.xz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.xz) ${EXTRA_IMAGECMD}"
IMAGE_CMD_cpio.gz.u-boot = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}; mkimage -A ${UBOOT_ARCH} -O linux -T ramdisk -C gzip -n ${IMAGE_NAME} -d ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz.u-boot"
-IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | lzma -c ${LZMA_COMPRESSION_LEVEL} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
+IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz --format=lzma -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
IMAGE_CMD_ubi = "echo \[ubifs\] > ubinize.cfg ; echo mode=ubi >> ubinize.cfg ; echo image=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img >> ubinize.cfg ; echo vol_id=0 >> ubinize.cfg ; echo vol_type=dynamic >> ubinize.cfg ; echo vol_name=${UBI_VOLNAME} >> ubinize.cfg ; echo vol_flags=autoresize >> ubinize.cfg;mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS} && ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${UBINIZE_ARGS} ubinize.cfg"
IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS}"
@@ -435,7 +434,7 @@ IMAGE_DEPENDS_ext4.gz = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext4.bz2 = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext4.xz = "genext2fs-native e2fsprogs-native xz-native"
IMAGE_DEPENDS_cpio.gz.u-boot = "u-boot-mkimage-native"
-IMAGE_DEPENDS_cpio.lzma = "lzma-native"
+IMAGE_DEPENDS_cpio.lzma = "xz-native"
IMAGE_DEPENDS_cpio.xz = "xz-native"
IMAGE_DEPENDS_squashfs = "squashfs-tools-native"
IMAGE_DEPENDS_squashfs-lzma = "squashfs-tools-native"
diff --git a/recipes/linux/linux-kexecboot.inc b/recipes/linux/linux-kexecboot.inc
index efa45f2..d1bf6aa 100644
--- a/recipes/linux/linux-kexecboot.inc
+++ b/recipes/linux/linux-kexecboot.inc
@@ -1,5 +1,5 @@
# We set INC_PR here, since a change in the kexecboot recipe will need to get picked up by *all* the kernels:
-INC_PR = "r39"
+INC_PR = "r40"
inherit kernel siteinfo
@@ -57,7 +57,7 @@ def kernel_version_less_or_equal(variable, checkvalue, truevalue, falsevalue, d)
# force lzma compression for kernel (linux-kexecboot >= 2.6.32)
# force lzma compression for initramfs (linux-kexecboot >= 2.6.30)
-DEPENDS += '${@kernel_version_less_or_equal("PV", "2.6.29", "", "lzma-native", d)}'
+DEPENDS += '${@kernel_version_less_or_equal("PV", "2.6.29", "", "xz-native", d)}'
KERNEL_COMPRESSION = '${@kernel_version_less_or_equal("PV", "2.6.31", "", "CONFIG_KERNEL_LZMA=y", d)}'
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5] conf/bitbake: unbreak and improve lzma image compression handling and adapt linux-kexecboot.inc
2011-06-23 19:29 ` [PATCH v4] " Denis 'GNUtoo' Carikli
@ 2011-06-23 21:28 ` Denis 'GNUtoo' Carikli
2011-06-23 21:47 ` Andrea Adami
0 siblings, 1 reply; 7+ messages in thread
From: Denis 'GNUtoo' Carikli @ 2011-06-23 21:28 UTC (permalink / raw)
To: openembedded-devel; +Cc: Otavio Salvador
From: Otavio Salvador <otavio@ossystems.com.br>
We now use xz-native to generate lzma images
Kexecboot.inc needed to be adjusted in order to reflect the dependency
change from lzma-native to xz-native
The initramfs.cpio.gz were tested with linux-kexecboot on nokia900.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
---
conf/bitbake.conf | 5 ++---
recipes/linux/linux-kexecboot.inc | 4 ++--
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/conf/bitbake.conf b/conf/bitbake.conf
index 17a494d..66dfaba 100644
--- a/conf/bitbake.conf
+++ b/conf/bitbake.conf
@@ -149,7 +149,6 @@ QEMU_OPTIONS_armv7a = "-cpu cortex-a8"
# default compression levels
XZ_COMPRESSION_LEVEL ?= "-e -9"
-LZMA_COMPRESSION_LEVEL ?= "-e -9"
# default integrity check
XZ_INTEGRITY_CHECK ?= "crc32"
@@ -404,7 +403,7 @@ IMAGE_CMD_cpio = "cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc >${DEPLOY_DIR_
IMAGE_CMD_cpio.gz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}"
IMAGE_CMD_cpio.xz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.xz) ${EXTRA_IMAGECMD}"
IMAGE_CMD_cpio.gz.u-boot = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}; mkimage -A ${UBOOT_ARCH} -O linux -T ramdisk -C gzip -n ${IMAGE_NAME} -d ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz.u-boot"
-IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | lzma -c ${LZMA_COMPRESSION_LEVEL} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
+IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz --format=lzma -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
IMAGE_CMD_ubi = "echo \[ubifs\] > ubinize.cfg ; echo mode=ubi >> ubinize.cfg ; echo image=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img >> ubinize.cfg ; echo vol_id=0 >> ubinize.cfg ; echo vol_type=dynamic >> ubinize.cfg ; echo vol_name=${UBI_VOLNAME} >> ubinize.cfg ; echo vol_flags=autoresize >> ubinize.cfg;mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS} && ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${UBINIZE_ARGS} ubinize.cfg"
IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS}"
@@ -435,7 +434,7 @@ IMAGE_DEPENDS_ext4.gz = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext4.bz2 = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext4.xz = "genext2fs-native e2fsprogs-native xz-native"
IMAGE_DEPENDS_cpio.gz.u-boot = "u-boot-mkimage-native"
-IMAGE_DEPENDS_cpio.lzma = "lzma-native"
+IMAGE_DEPENDS_cpio.lzma = "xz-native"
IMAGE_DEPENDS_cpio.xz = "xz-native"
IMAGE_DEPENDS_squashfs = "squashfs-tools-native"
IMAGE_DEPENDS_squashfs-lzma = "squashfs-tools-native"
diff --git a/recipes/linux/linux-kexecboot.inc b/recipes/linux/linux-kexecboot.inc
index efa45f2..d1bf6aa 100644
--- a/recipes/linux/linux-kexecboot.inc
+++ b/recipes/linux/linux-kexecboot.inc
@@ -1,5 +1,5 @@
# We set INC_PR here, since a change in the kexecboot recipe will need to get picked up by *all* the kernels:
-INC_PR = "r39"
+INC_PR = "r40"
inherit kernel siteinfo
@@ -57,7 +57,7 @@ def kernel_version_less_or_equal(variable, checkvalue, truevalue, falsevalue, d)
# force lzma compression for kernel (linux-kexecboot >= 2.6.32)
# force lzma compression for initramfs (linux-kexecboot >= 2.6.30)
-DEPENDS += '${@kernel_version_less_or_equal("PV", "2.6.29", "", "lzma-native", d)}'
+DEPENDS += '${@kernel_version_less_or_equal("PV", "2.6.29", "", "xz-native", d)}'
KERNEL_COMPRESSION = '${@kernel_version_less_or_equal("PV", "2.6.31", "", "CONFIG_KERNEL_LZMA=y", d)}'
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v5] conf/bitbake: unbreak and improve lzma image compression handling and adapt linux-kexecboot.inc
2011-06-23 21:28 ` [PATCH v5] conf/bitbake: unbreak and improve lzma image compression " Denis 'GNUtoo' Carikli
@ 2011-06-23 21:47 ` Andrea Adami
0 siblings, 0 replies; 7+ messages in thread
From: Andrea Adami @ 2011-06-23 21:47 UTC (permalink / raw)
To: openembedded-devel
On Thu, Jun 23, 2011 at 11:28 PM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org> wrote:
> From: Otavio Salvador <otavio@ossystems.com.br>
>
> We now use xz-native to generate lzma images
>
> Kexecboot.inc needed to be adjusted in order to reflect the dependency
> change from lzma-native to xz-native
>
> The initramfs.cpio.gz were tested with linux-kexecboot on nokia900.
>
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
> ---
> conf/bitbake.conf | 5 ++---
> recipes/linux/linux-kexecboot.inc | 4 ++--
> 2 files changed, 4 insertions(+), 5 deletions(-)
>
<snip>
Acked-by: Andrea Adami <andrea.adami@gmail.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-06-23 21:51 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-22 15:57 [PATCH v2] conf/bitbake: improve compression image handling and adapt linux-kexecboot.inc Denis 'GNUtoo' Carikli
2011-06-22 16:00 ` Phil Blundell
2011-06-22 17:00 ` [PATCH v3] " Denis 'GNUtoo' Carikli
2011-06-22 21:55 ` Andrea Adami
2011-06-23 19:29 ` [PATCH v4] " Denis 'GNUtoo' Carikli
2011-06-23 21:28 ` [PATCH v5] conf/bitbake: unbreak and improve lzma image compression " Denis 'GNUtoo' Carikli
2011-06-23 21:47 ` Andrea Adami
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.