* [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200707
@ 2020-07-07 16:20 Patrick DELAUNAY
2020-07-07 19:17 ` Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Patrick DELAUNAY @ 2020-07-07 16:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the STM32 related patches for v2020.10: u-boot-stm32-20200707
With the following changes:
- arch and board update for stm32mp15:
- use OPP information in device tree for 800MHz/650MHz support
- ram: inprovments of test command
- solve boot on closed chip when access to DBGMCU_IDC is protected
- stm32prog command: Add "device anme" during USB enumeration
- update configs: activate WATCHDOG and 'env erase' command,
increase teed partition, support SD card after NOR boot by default and
use env info in env_check
- some sboard cleanups: gpio hog in dh board, specific driver for
type-c stusb1600 controller code in a driver move part of code in spl.c
and in common directory
- fix STM32 compatible for dwc_eth_qos driver
- support of new pinctrl ops get_dir_flags/set_dir_flags in stm32 and stmfx
drivers
- vrefbuf: fix a possible overshoot when re-enabling
CI status:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/3917
Thanks,
Patrick
The following changes since commit 23da3c682a84a2ad67a67287979dd4f5259ff607:
Revert "riscv: sifive: fu540: Add gpio-restart support" (2020-07-06 17:57:47 -0400)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20200707
for you to fetch changes up to 6c393e8c0fae98a3a6e2909fc79697075552a152:
ram: stm32mp1: add size and addr parameter to test all (2020-07-07 16:01:23 +0200)
----------------------------------------------------------------
- arch and board update for stm32mp15:
- use OPP information in device tree for 800MHz/650MHz support
- ram: inprovments of test command
- solve boot on closed chip when access to DBGMCU_IDC is protected
- stm32prog command: Add "device anme" during USB enumeration
- update configs: activate WATCHDOG and 'env erase' command,
increase teed partition, support SD card after NOR boot by default and
use env info in env_check
- some sboard cleanups: gpio hog in dh board, specific driver for
type-c stusb1600 controller code in a driver move part of code in spl.c
and in common directory
- fix STM32 compatible for dwc_eth_qos driver
- support of new pinctrl ops get_dir_flags/set_dir_flags in stm32 and stmfx
drivers
- vrefbuf: fix a possible overshoot when re-enabling
----------------------------------------------------------------
Fabrice Gasnier (1):
power: regulator: stm32: vrefbuf: fix a possible overshoot when re-enabling
Patrick Delaunay (35):
net: dwc_eth_qos: update the compatible supported for STM32
arm: stm32mp: spl: add bsec driver in SPL
ARM: dts: stm32: add cpufreq support on stm32mp15x
board: st: create common file stpmic1.c
stm32mp1: clk: configure pll1 with OPP
arm: stm32mp: add weak function to save vddcore
board: st: stpmic1: add function stpmic1_init
board: stm32mp1: update vddcore in SPL
ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL
board: stm32mp1: move the function board_debug_uart_init in spl.c
configs: stm32mp1: activate CONFIG_GPIO_HOG
board: stm32mp1: update the gpio hog support
gpio: stm32: add ops set_dir_flags
gpio: stm32: add ops get_dir_flags
gpio: stmfx: move function to prepare new ops introduction
gpio: stmfx: rename function used to change pin configuration
gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg
gpio: stmfx: add ops set_dir_flag
gpio: stmfx: add ops get_dir_flags
pinctrl: stmfx: add information on pin configuration
pinctrl: stm32: add information on pin configuration
configs: stm32mp1: activate WATCHDOG
stm32mp1: configs: activate CMD_ERASEENV
board: st: stm32mp1: increase teed partition
arm: stm32mp: stm32prog: add "Device Name" in iproduct during DFU USB enumeration
arm: stm32mp: protect DBGMCU_IDC access with BSEC
configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp
board: st: move type-c stusb1600 controller code in a driver
board: dh_stm32mp1: update the gpio hog support
cmd: env: use ENV_IS_IN_DEVICE in env info
stm32mp1: use the command env info in env_check
ram: stm32mp1: protect minimum value in get_bufsize
ram: stm32mp1: add parameter addr in test FrequencySelectivePattern
ram: stm32mp1: use the DDR size by default in the test addressBus
ram: stm32mp1: add size and addr parameter to test all
arch/arm/dts/stm32mp15-u-boot.dtsi | 12 +++++-
arch/arm/dts/stm32mp151.dtsi | 21 +++++++++
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 9 ----
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 9 ----
arch/arm/dts/stm32mp157c-ed1.dts | 8 ++++
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 9 ----
arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 9 ----
arch/arm/dts/stm32mp15xx-dkx.dtsi | 8 ++++
arch/arm/mach-stm32mp/Kconfig | 2 +-
arch/arm/mach-stm32mp/Makefile | 2 +-
arch/arm/mach-stm32mp/bsec.c | 36 +++++++++++++---
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c | 6 ++-
arch/arm/mach-stm32mp/cpu.c | 22 ++++++++--
arch/arm/mach-stm32mp/include/mach/bsec.h | 7 +++
arch/arm/mach-stm32mp/include/mach/sys_proto.h | 3 ++
board/dhelectronics/dh_stm32mp1/Makefile | 6 +--
board/dhelectronics/dh_stm32mp1/board.c | 20 +++++----
board/st/common/Kconfig | 9 +++-
board/st/common/Makefile | 3 ++
board/st/common/stpmic1.c | 216 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/st/common/stpmic1.h | 6 +++
board/st/common/stusb160x.c | 46 ++++++++++++++++++++
board/st/common/stusb160x.h | 10 +++++
board/st/stm32mp1/Makefile | 2 -
board/st/stm32mp1/board.c | 158 -------------------------------------------------------------------
board/st/stm32mp1/spl.c | 76 ++++++++++++++++++--------------
board/st/stm32mp1/stm32mp1.c | 74 ++++++--------------------------
cmd/nvedit.c | 2 +-
configs/stm32mp15_basic_defconfig | 6 +++
configs/stm32mp15_trusted_defconfig | 5 +++
doc/device-tree-bindings/clock/st,stm32mp1.txt | 4 ++
drivers/clk/clk_stm32mp1.c | 295 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
drivers/gpio/stm32_gpio.c | 149 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
drivers/net/dwc_eth_qos.c | 2 +-
drivers/pinctrl/pinctrl-stmfx.c | 225 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------
drivers/pinctrl/pinctrl_stm32.c | 27 ++++++++++--
drivers/power/regulator/stm32-vrefbuf.c | 16 ++++++-
drivers/ram/stm32mp1/stm32mp1_tests.c | 98 ++++++++++++++++++++++++++++++------------
include/configs/stm32mp1.h | 8 ++--
39 files changed, 1166 insertions(+), 460 deletions(-)
create mode 100644 arch/arm/mach-stm32mp/include/mach/bsec.h
create mode 100644 board/st/common/stpmic1.c
create mode 100644 board/st/common/stpmic1.h
create mode 100644 board/st/common/stusb160x.c
create mode 100644 board/st/common/stusb160x.h
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200707
2020-07-07 16:20 [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200707 Patrick DELAUNAY
@ 2020-07-07 19:17 ` Tom Rini
0 siblings, 0 replies; 2+ messages in thread
From: Tom Rini @ 2020-07-07 19:17 UTC (permalink / raw)
To: u-boot
On Tue, Jul 07, 2020 at 04:20:12PM +0000, Patrick DELAUNAY wrote:
> Hi Tom,
>
> Please pull the STM32 related patches for v2020.10: u-boot-stm32-20200707
>
> With the following changes:
> - arch and board update for stm32mp15:
> - use OPP information in device tree for 800MHz/650MHz support
> - ram: inprovments of test command
> - solve boot on closed chip when access to DBGMCU_IDC is protected
> - stm32prog command: Add "device anme" during USB enumeration
> - update configs: activate WATCHDOG and 'env erase' command,
> increase teed partition, support SD card after NOR boot by default and
> use env info in env_check
> - some sboard cleanups: gpio hog in dh board, specific driver for
> type-c stusb1600 controller code in a driver move part of code in spl.c
> and in common directory
> - fix STM32 compatible for dwc_eth_qos driver
> - support of new pinctrl ops get_dir_flags/set_dir_flags in stm32 and stmfx
> drivers
> - vrefbuf: fix a possible overshoot when re-enabling
>
> CI status:
> https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/3917
>
> Thanks,
> Patrick
>
> The following changes since commit 23da3c682a84a2ad67a67287979dd4f5259ff607:
>
> Revert "riscv: sifive: fu540: Add gpio-restart support" (2020-07-06 17:57:47 -0400)
>
> are available in the Git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20200707
>
> for you to fetch changes up to 6c393e8c0fae98a3a6e2909fc79697075552a152:
>
> ram: stm32mp1: add size and addr parameter to test all (2020-07-07 16:01:23 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200707/ec699978/attachment.sig>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-07-07 19:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-07 16:20 [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200707 Patrick DELAUNAY
2020-07-07 19:17 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.