All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tarun Kanti DebBarma <tarun.kanti@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@ti.com, santosh.shilimkar@ti.com, tony@atomide.com,
	linux-arm-kernel@lists.infradead.org,
	Tarun Kanti DebBarma <tarun.kanti@ti.com>
Subject: [PATCH v14 REPOST 08/12] OMAP: dmtimer: add timeout to low-level routines
Date: Fri, 15 Jul 2011 17:34:57 +0530	[thread overview]
Message-ID: <1310731501-13078-9-git-send-email-tarun.kanti@ti.com> (raw)
In-Reply-To: <1310731501-13078-1-git-send-email-tarun.kanti@ti.com>

The low-level read and write access routines wait on write-pending register
in posted mode to make sure that previous write is complete on respective
registers. This waiting is done in an infinite while loop. Now it is being
modified to use timeout instead.

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Reviewed-by: Varadarajan, Charulatha <charu@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
---
 arch/arm/plat-omap/include/plat/dmtimer.h |   34 ++++++++++++++++++++--------
 1 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 53d5da6..6e34094 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -36,6 +36,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 
+#include <plat/common.h>
+
 #ifndef __ASM_ARCH_DMTIMER_H
 #define __ASM_ARCH_DMTIMER_H
 
@@ -230,6 +232,8 @@ int omap_dm_timers_active(void);
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
+#define MAX_WRITE_PEND_WAIT            10000 /* 10ms timeout delay */
+
 struct omap_dm_timer {
 	unsigned long phys_base;
 	int id;
@@ -251,11 +255,16 @@ void omap_dm_timer_prepare(struct omap_dm_timer *timer);
 static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
 						int posted, u8 func_offset)
 {
-	if (posted)
-		while (__raw_readl(base +
-			((OMAP_TIMER_WRITE_PEND_REG + func_offset) & 0xff))
-				& (reg >> WPSHIFT))
-			cpu_relax();
+	int i = 0;
+
+	if (posted) {
+		omap_test_timeout(!(__raw_readl(base +
+			((OMAP_TIMER_WRITE_PEND_REG + func_offset) & 0xff)) &
+				(reg >> WPSHIFT)), MAX_WRITE_PEND_WAIT, i);
+
+		if (WARN_ON_ONCE(i == MAX_WRITE_PEND_WAIT))
+			pr_err("read timeout.\n");
+	}
 
 	return __raw_readl(base + (reg & 0xff));
 }
@@ -263,11 +272,16 @@ static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
 static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val,
 						int posted, u8 func_offset)
 {
-	if (posted)
-		while (__raw_readl(base +
-			((OMAP_TIMER_WRITE_PEND_REG + func_offset) & 0xff))
-				& (reg >> WPSHIFT))
-			cpu_relax();
+	int i = 0;
+
+	if (posted) {
+		omap_test_timeout(!(__raw_readl(base +
+			((OMAP_TIMER_WRITE_PEND_REG + func_offset) & 0xff)) &
+				(reg >> WPSHIFT)), MAX_WRITE_PEND_WAIT, i);
+
+		if (WARN_ON(i == MAX_WRITE_PEND_WAIT))
+			pr_err("write timeout.\n");
+	}
 
 	__raw_writel(val, base + (reg & 0xff));
 }
-- 
1.6.0.4


WARNING: multiple messages have this Message-ID (diff)
From: tarun.kanti@ti.com (Tarun Kanti DebBarma)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v14 REPOST 08/12] OMAP: dmtimer: add timeout to low-level routines
Date: Fri, 15 Jul 2011 17:34:57 +0530	[thread overview]
Message-ID: <1310731501-13078-9-git-send-email-tarun.kanti@ti.com> (raw)
In-Reply-To: <1310731501-13078-1-git-send-email-tarun.kanti@ti.com>

The low-level read and write access routines wait on write-pending register
in posted mode to make sure that previous write is complete on respective
registers. This waiting is done in an infinite while loop. Now it is being
modified to use timeout instead.

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Reviewed-by: Varadarajan, Charulatha <charu@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
---
 arch/arm/plat-omap/include/plat/dmtimer.h |   34 ++++++++++++++++++++--------
 1 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 53d5da6..6e34094 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -36,6 +36,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 
+#include <plat/common.h>
+
 #ifndef __ASM_ARCH_DMTIMER_H
 #define __ASM_ARCH_DMTIMER_H
 
@@ -230,6 +232,8 @@ int omap_dm_timers_active(void);
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
+#define MAX_WRITE_PEND_WAIT            10000 /* 10ms timeout delay */
+
 struct omap_dm_timer {
 	unsigned long phys_base;
 	int id;
@@ -251,11 +255,16 @@ void omap_dm_timer_prepare(struct omap_dm_timer *timer);
 static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
 						int posted, u8 func_offset)
 {
-	if (posted)
-		while (__raw_readl(base +
-			((OMAP_TIMER_WRITE_PEND_REG + func_offset) & 0xff))
-				& (reg >> WPSHIFT))
-			cpu_relax();
+	int i = 0;
+
+	if (posted) {
+		omap_test_timeout(!(__raw_readl(base +
+			((OMAP_TIMER_WRITE_PEND_REG + func_offset) & 0xff)) &
+				(reg >> WPSHIFT)), MAX_WRITE_PEND_WAIT, i);
+
+		if (WARN_ON_ONCE(i == MAX_WRITE_PEND_WAIT))
+			pr_err("read timeout.\n");
+	}
 
 	return __raw_readl(base + (reg & 0xff));
 }
@@ -263,11 +272,16 @@ static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
 static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val,
 						int posted, u8 func_offset)
 {
-	if (posted)
-		while (__raw_readl(base +
-			((OMAP_TIMER_WRITE_PEND_REG + func_offset) & 0xff))
-				& (reg >> WPSHIFT))
-			cpu_relax();
+	int i = 0;
+
+	if (posted) {
+		omap_test_timeout(!(__raw_readl(base +
+			((OMAP_TIMER_WRITE_PEND_REG + func_offset) & 0xff)) &
+				(reg >> WPSHIFT)), MAX_WRITE_PEND_WAIT, i);
+
+		if (WARN_ON(i == MAX_WRITE_PEND_WAIT))
+			pr_err("write timeout.\n");
+	}
 
 	__raw_writel(val, base + (reg & 0xff));
 }
-- 
1.6.0.4

  parent reply	other threads:[~2011-07-15 12:05 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-15 12:04 [PATCH v14 REPOST 00/12] dmtimer adaptation to platform_driver Tarun Kanti DebBarma
2011-07-15 12:04 ` Tarun Kanti DebBarma
2011-07-15 12:04 ` [PATCH v14 REPOST 01/12] OMAP2+: dmtimer: add device names to flck nodes Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 14:15   ` Santosh
2011-08-26 14:15     ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 02/12] OMAP4: hwmod data: add dmtimer version information Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 15:21   ` Santosh
2011-08-26 15:21     ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 03/12] OMAP1: dmtimer: conversion to platform devices Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 14:26   ` Santosh
2011-08-26 14:26     ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 04/12] OMAP2+: dmtimer: convert " Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 14:33   ` Santosh
2011-08-26 14:33     ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 05/12] OMAP: dmtimer: platform driver Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 14:34   ` Santosh
2011-08-26 14:34     ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 06/12] OMAP: dmtimer: switch-over to platform device driver Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 15:20   ` Santosh
2011-08-26 15:20     ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 07/12] OMAP: dmtimer: pm_runtime support Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 15:27   ` Santosh
2011-08-26 15:27     ` Santosh
2011-08-26 16:23     ` Kevin Hilman
2011-08-26 16:23       ` Kevin Hilman
2011-08-26 16:34       ` Santosh
2011-08-26 16:34         ` Santosh
2011-07-15 12:04 ` Tarun Kanti DebBarma [this message]
2011-07-15 12:04   ` [PATCH v14 REPOST 08/12] OMAP: dmtimer: add timeout to low-level routines Tarun Kanti DebBarma
2011-08-26 15:30   ` Santosh
2011-08-26 15:30     ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 09/12] OMAP: dmtimer: use mutex instead of spinlock Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 15:34   ` Santosh
2011-08-26 15:34     ` Santosh
2011-08-26 16:09     ` Santosh
2011-08-26 16:09       ` Santosh
2011-07-15 12:04 ` [PATCH v14 REPOST 10/12] OMAP: dmtimer: mark clocksource and clockevent timers reserved Tarun Kanti DebBarma
2011-07-15 12:04   ` Tarun Kanti DebBarma
2011-08-26 15:44   ` Santosh
2011-08-26 15:44     ` Santosh
2011-07-15 12:05 ` [PATCH v14 REPOST 11/12] OMAP: dmtimer: add context save/restore routines Tarun Kanti DebBarma
2011-07-15 12:05   ` Tarun Kanti DebBarma
2011-08-26 15:46   ` Santosh
2011-08-26 15:46     ` Santosh
2011-07-15 12:05 ` [PATCH v14 REPOST 12/12] OMAP: dmtimer: Off mode support Tarun Kanti DebBarma
2011-07-15 12:05   ` Tarun Kanti DebBarma
2011-08-26 16:04   ` Santosh
2011-08-26 16:04     ` Santosh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1310731501-13078-9-git-send-email-tarun.kanti@ti.com \
    --to=tarun.kanti@ti.com \
    --cc=khilman@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=santosh.shilimkar@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.