All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boojin Kim <boojin.kim@samsung.com>
To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org
Cc: Vinod Koul <vinod.koul@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	Kukjin Kim <kgene.kim@samsung.com>,
	Grant Likely <grant.likely@secretlab.ca>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Boojin Kim <boojin.kim@samsung.com>
Subject: [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API
Date: Mon, 25 Jul 2011 10:28:30 +0900	[thread overview]
Message-ID: <1311557312-26107-13-git-send-email-boojin.kim@samsung.com> (raw)
In-Reply-To: <1311557312-26107-1-git-send-email-boojin.kim@samsung.com>

This patch adds to support DMA generic API to transfer raw
SPI data. Basiclly the spi driver uses DMA generic API if
architecture supports it. Otherwise, uses Samsung specific
S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 drivers/spi/spi_s3c64xx.c |  141 ++++++++++++++++++++++-----------------------
 1 files changed, 69 insertions(+), 72 deletions(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 8945e20..a4cf76a 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -172,6 +172,9 @@ struct s3c64xx_spi_driver_data {
 	unsigned                        state;
 	unsigned                        cur_mode, cur_bpw;
 	unsigned                        cur_speed;
+	unsigned			rx_ch;
+	unsigned			tx_ch;
+	struct samsung_dma_ops		*ops;
 };
 
 static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@@ -227,6 +230,38 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 	writel(val, regs + S3C64XX_SPI_CH_CFG);
 }
 
+static void s3c64xx_spi_dma_rxcb(void *data)
+{
+	struct s3c64xx_spi_driver_data *sdd
+		= (struct s3c64xx_spi_driver_data *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	sdd->state &= ~RXBUSY;
+	/* If the other done */
+	if (!(sdd->state & TXBUSY))
+		complete(&sdd->xfer_completion);
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
+static void s3c64xx_spi_dma_txcb(void *data)
+{
+	struct s3c64xx_spi_driver_data *sdd
+		= (struct s3c64xx_spi_driver_data *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	sdd->state &= ~TXBUSY;
+	/* If the other done */
+	if (!(sdd->state & RXBUSY))
+		complete(&sdd->xfer_completion);
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
 static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_device *spi,
 				struct spi_transfer *xfer, int dma_mode)
@@ -234,6 +269,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	u32 modecfg, chcfg;
+	struct samsung_dma_prep_info info;
 
 	modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
 	modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
@@ -259,10 +295,14 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 		chcfg |= S3C64XX_SPI_CH_TXCH_ON;
 		if (dma_mode) {
 			modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
-			s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8);
-			s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
-						xfer->tx_dma, xfer->len);
-			s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
+			info.cap = DMA_SLAVE;
+			info.direction = DMA_TO_DEVICE;
+			info.buf = xfer->tx_dma;
+			info.len = xfer->len;
+			info.fp = s3c64xx_spi_dma_txcb;
+			info.fp_param = sdd;
+			sdd->ops->prepare(sdd->tx_ch, &info);
+			sdd->ops->trigger(sdd->tx_ch);
 		} else {
 			switch (sdd->cur_bpw) {
 			case 32:
@@ -294,10 +334,14 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 			writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
 					| S3C64XX_SPI_PACKET_CNT_EN,
 					regs + S3C64XX_SPI_PACKET_CNT);
-			s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8);
-			s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
-						xfer->rx_dma, xfer->len);
-			s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
+			info.cap = DMA_SLAVE;
+			info.direction = DMA_FROM_DEVICE;
+			info.buf = xfer->rx_dma;
+			info.len = xfer->len;
+			info.fp = s3c64xx_spi_dma_rxcb;
+			info.fp_param = sdd;
+			sdd->ops->prepare(sdd->rx_ch, &info);
+			sdd->ops->trigger(sdd->rx_ch);
 		}
 	}
 
@@ -483,46 +527,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 	}
 }
 
-static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				 int size, enum s3c2410_dma_buffresult res)
-{
-	struct s3c64xx_spi_driver_data *sdd = buf_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	if (res == S3C2410_RES_OK)
-		sdd->state &= ~RXBUSY;
-	else
-		dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
-
-	/* If the other done */
-	if (!(sdd->state & TXBUSY))
-		complete(&sdd->xfer_completion);
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
-static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				 int size, enum s3c2410_dma_buffresult res)
-{
-	struct s3c64xx_spi_driver_data *sdd = buf_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	if (res == S3C2410_RES_OK)
-		sdd->state &= ~TXBUSY;
-	else
-		dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
-
-	/* If the other done */
-	if (!(sdd->state & RXBUSY))
-		complete(&sdd->xfer_completion);
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
 #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
 
 static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
@@ -697,12 +701,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
 			if (use_dma) {
 				if (xfer->tx_buf != NULL
 						&& (sdd->state & TXBUSY))
-					s3c2410_dma_ctrl(sdd->tx_dmach,
-							S3C2410_DMAOP_FLUSH);
+					sdd->ops->stop(sdd->tx_ch);
 				if (xfer->rx_buf != NULL
 						&& (sdd->state & RXBUSY))
-					s3c2410_dma_ctrl(sdd->rx_dmach,
-							S3C2410_DMAOP_FLUSH);
+					sdd->ops->stop(sdd->rx_ch);
 			}
 
 			goto out;
@@ -742,24 +744,19 @@ out:
 
 static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
 {
-	if (s3c2410_dma_request(sdd->rx_dmach,
-					&s3c64xx_spi_dma_client, NULL) < 0) {
-		dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
-		return 0;
-	}
-	s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
-	s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
-					sdd->sfr_start + S3C64XX_SPI_RX_DATA);
-
-	if (s3c2410_dma_request(sdd->tx_dmach,
-					&s3c64xx_spi_dma_client, NULL) < 0) {
-		dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
-		s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
-		return 0;
-	}
-	s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
-	s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
-					sdd->sfr_start + S3C64XX_SPI_TX_DATA);
+
+	struct samsung_dma_info info;
+	sdd->ops = samsung_dma_get_ops();
+
+	info.cap = DMA_SLAVE;
+	info.client = &s3c64xx_spi_dma_client;
+	info.direction = DMA_FROM_DEVICE;
+	info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+	info.width = sdd->cur_bpw / 8;
+	sdd->rx_ch = sdd->ops->request(sdd->rx_dmach, &info);
+	info.direction = DMA_TO_DEVICE;
+	info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+	sdd->tx_ch = sdd->ops->request(sdd->tx_dmach, &info);
 
 	return 1;
 }
@@ -800,8 +797,8 @@ static void s3c64xx_spi_work(struct work_struct *work)
 	spin_unlock_irqrestore(&sdd->lock, flags);
 
 	/* Free DMA channels */
-	s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
-	s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
+	sdd->ops->release(sdd->rx_ch, &s3c64xx_spi_dma_client);
+	sdd->ops->release(sdd->tx_ch, &s3c64xx_spi_dma_client);
 }
 
 static int s3c64xx_spi_transfer(struct spi_device *spi,
-- 
1.7.1

WARNING: multiple messages have this Message-ID (diff)
From: boojin.kim@samsung.com (Boojin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API
Date: Mon, 25 Jul 2011 10:28:30 +0900	[thread overview]
Message-ID: <1311557312-26107-13-git-send-email-boojin.kim@samsung.com> (raw)
In-Reply-To: <1311557312-26107-1-git-send-email-boojin.kim@samsung.com>

This patch adds to support DMA generic API to transfer raw
SPI data. Basiclly the spi driver uses DMA generic API if
architecture supports it. Otherwise, uses Samsung specific
S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 drivers/spi/spi_s3c64xx.c |  141 ++++++++++++++++++++++-----------------------
 1 files changed, 69 insertions(+), 72 deletions(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 8945e20..a4cf76a 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -172,6 +172,9 @@ struct s3c64xx_spi_driver_data {
 	unsigned                        state;
 	unsigned                        cur_mode, cur_bpw;
 	unsigned                        cur_speed;
+	unsigned			rx_ch;
+	unsigned			tx_ch;
+	struct samsung_dma_ops		*ops;
 };
 
 static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@@ -227,6 +230,38 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 	writel(val, regs + S3C64XX_SPI_CH_CFG);
 }
 
+static void s3c64xx_spi_dma_rxcb(void *data)
+{
+	struct s3c64xx_spi_driver_data *sdd
+		= (struct s3c64xx_spi_driver_data *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	sdd->state &= ~RXBUSY;
+	/* If the other done */
+	if (!(sdd->state & TXBUSY))
+		complete(&sdd->xfer_completion);
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
+static void s3c64xx_spi_dma_txcb(void *data)
+{
+	struct s3c64xx_spi_driver_data *sdd
+		= (struct s3c64xx_spi_driver_data *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	sdd->state &= ~TXBUSY;
+	/* If the other done */
+	if (!(sdd->state & RXBUSY))
+		complete(&sdd->xfer_completion);
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
 static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_device *spi,
 				struct spi_transfer *xfer, int dma_mode)
@@ -234,6 +269,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	u32 modecfg, chcfg;
+	struct samsung_dma_prep_info info;
 
 	modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
 	modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
@@ -259,10 +295,14 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 		chcfg |= S3C64XX_SPI_CH_TXCH_ON;
 		if (dma_mode) {
 			modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
-			s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8);
-			s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
-						xfer->tx_dma, xfer->len);
-			s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
+			info.cap = DMA_SLAVE;
+			info.direction = DMA_TO_DEVICE;
+			info.buf = xfer->tx_dma;
+			info.len = xfer->len;
+			info.fp = s3c64xx_spi_dma_txcb;
+			info.fp_param = sdd;
+			sdd->ops->prepare(sdd->tx_ch, &info);
+			sdd->ops->trigger(sdd->tx_ch);
 		} else {
 			switch (sdd->cur_bpw) {
 			case 32:
@@ -294,10 +334,14 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 			writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
 					| S3C64XX_SPI_PACKET_CNT_EN,
 					regs + S3C64XX_SPI_PACKET_CNT);
-			s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8);
-			s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
-						xfer->rx_dma, xfer->len);
-			s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
+			info.cap = DMA_SLAVE;
+			info.direction = DMA_FROM_DEVICE;
+			info.buf = xfer->rx_dma;
+			info.len = xfer->len;
+			info.fp = s3c64xx_spi_dma_rxcb;
+			info.fp_param = sdd;
+			sdd->ops->prepare(sdd->rx_ch, &info);
+			sdd->ops->trigger(sdd->rx_ch);
 		}
 	}
 
@@ -483,46 +527,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 	}
 }
 
-static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				 int size, enum s3c2410_dma_buffresult res)
-{
-	struct s3c64xx_spi_driver_data *sdd = buf_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	if (res == S3C2410_RES_OK)
-		sdd->state &= ~RXBUSY;
-	else
-		dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
-
-	/* If the other done */
-	if (!(sdd->state & TXBUSY))
-		complete(&sdd->xfer_completion);
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
-static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				 int size, enum s3c2410_dma_buffresult res)
-{
-	struct s3c64xx_spi_driver_data *sdd = buf_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	if (res == S3C2410_RES_OK)
-		sdd->state &= ~TXBUSY;
-	else
-		dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
-
-	/* If the other done */
-	if (!(sdd->state & RXBUSY))
-		complete(&sdd->xfer_completion);
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
 #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
 
 static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
@@ -697,12 +701,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
 			if (use_dma) {
 				if (xfer->tx_buf != NULL
 						&& (sdd->state & TXBUSY))
-					s3c2410_dma_ctrl(sdd->tx_dmach,
-							S3C2410_DMAOP_FLUSH);
+					sdd->ops->stop(sdd->tx_ch);
 				if (xfer->rx_buf != NULL
 						&& (sdd->state & RXBUSY))
-					s3c2410_dma_ctrl(sdd->rx_dmach,
-							S3C2410_DMAOP_FLUSH);
+					sdd->ops->stop(sdd->rx_ch);
 			}
 
 			goto out;
@@ -742,24 +744,19 @@ out:
 
 static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
 {
-	if (s3c2410_dma_request(sdd->rx_dmach,
-					&s3c64xx_spi_dma_client, NULL) < 0) {
-		dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
-		return 0;
-	}
-	s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
-	s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
-					sdd->sfr_start + S3C64XX_SPI_RX_DATA);
-
-	if (s3c2410_dma_request(sdd->tx_dmach,
-					&s3c64xx_spi_dma_client, NULL) < 0) {
-		dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
-		s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
-		return 0;
-	}
-	s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
-	s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
-					sdd->sfr_start + S3C64XX_SPI_TX_DATA);
+
+	struct samsung_dma_info info;
+	sdd->ops = samsung_dma_get_ops();
+
+	info.cap = DMA_SLAVE;
+	info.client = &s3c64xx_spi_dma_client;
+	info.direction = DMA_FROM_DEVICE;
+	info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+	info.width = sdd->cur_bpw / 8;
+	sdd->rx_ch = sdd->ops->request(sdd->rx_dmach, &info);
+	info.direction = DMA_TO_DEVICE;
+	info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+	sdd->tx_ch = sdd->ops->request(sdd->tx_dmach, &info);
 
 	return 1;
 }
@@ -800,8 +797,8 @@ static void s3c64xx_spi_work(struct work_struct *work)
 	spin_unlock_irqrestore(&sdd->lock, flags);
 
 	/* Free DMA channels */
-	s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
-	s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
+	sdd->ops->release(sdd->rx_ch, &s3c64xx_spi_dma_client);
+	sdd->ops->release(sdd->tx_ch, &s3c64xx_spi_dma_client);
 }
 
 static int s3c64xx_spi_transfer(struct spi_device *spi,
-- 
1.7.1

  parent reply	other threads:[~2011-07-25  1:39 UTC|newest]

Thread overview: 146+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-25  1:28 [RESEND] [PATCH V4 0/14] To use DMA generic APIs for Samsung DMA Boojin Kim
2011-07-25  1:28 ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 01/14] DMA: PL330: Add support runtime PM for PL330 DMAC Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-26  6:03   ` Chanwoo Choi
2011-07-26  6:03     ` Chanwoo Choi
2011-07-25  1:28 ` [PATCH V4 02/14] DMA: PL330: Update PL330 DMA API driver Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25  8:57   ` Jassi Brar
2011-07-25  8:57     ` Jassi Brar
2011-07-25  9:48     ` Boojin Kim
2011-07-25  9:48       ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 03/14] DMA: PL330: Support DMA_SLAVE_CONFIG command Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25 10:26   ` Vinod Koul
2011-07-25 10:26     ` Vinod Koul
2011-07-25 12:51     ` Boojin Kim
2011-07-25 12:51       ` Boojin Kim
2011-07-25 13:48       ` Vinod Koul
2011-07-25 13:48         ` Vinod Koul
2011-07-26 13:04         ` Boojin Kim
2011-07-26 13:04           ` Boojin Kim
2011-07-26 13:12           ` Russell King - ARM Linux
2011-07-26 13:12             ` Russell King - ARM Linux
2011-07-25  1:28 ` [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25  9:27   ` Russell King - ARM Linux
2011-07-25  9:27     ` Russell King - ARM Linux
2011-07-25 10:31     ` Boojin Kim
2011-07-25 10:31       ` Boojin Kim
2011-07-25 10:36       ` Russell King - ARM Linux
2011-07-25 10:36         ` Russell King - ARM Linux
2011-07-25 10:48         ` Vinod Koul
2011-07-25 10:48           ` Vinod Koul
2011-07-25 10:57           ` Russell King - ARM Linux
2011-07-25 10:57             ` Russell King - ARM Linux
2011-07-25 11:01             ` Vinod Koul
2011-07-25 11:01               ` Vinod Koul
2011-07-25 11:39               ` Russell King - ARM Linux
2011-07-25 11:39                 ` Russell King - ARM Linux
2011-07-25 12:01                 ` Vinod Koul
2011-07-25 12:01                   ` Vinod Koul
2011-07-26  7:57                   ` [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability) Russell King - ARM Linux
2011-07-26  7:57                     ` Russell King - ARM Linux
2011-07-26  9:35                     ` Vinod Koul
2011-07-26  9:35                       ` Vinod Koul
2011-07-26 14:37                       ` Jassi Brar
2011-07-26 14:37                         ` Jassi Brar
2011-07-26 17:20                         ` Russell King - ARM Linux
2011-07-26 17:20                           ` Russell King - ARM Linux
2011-07-26 17:55                           ` Jassi Brar
2011-07-26 17:55                             ` Jassi Brar
2011-07-26 18:03                             ` Grant Likely
2011-07-26 18:03                               ` Grant Likely
2011-07-26 18:16                             ` Russell King - ARM Linux
2011-07-26 18:16                               ` Russell King - ARM Linux
2011-07-27  2:38                             ` Vinod Koul
2011-07-27  2:38                               ` Vinod Koul
2011-07-27  9:01                       ` Russell King - ARM Linux
2011-07-27  9:01                         ` Russell King - ARM Linux
2011-07-27  9:06                         ` Koul, Vinod
2011-07-27  9:06                           ` Koul, Vinod
2011-07-26 13:25                     ` Russell King - ARM Linux
2011-07-26 13:25                       ` Russell King - ARM Linux
2011-07-25 12:36           ` [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability Boojin Kim
2011-07-25 12:36             ` Boojin Kim
2011-07-25 12:34         ` Boojin Kim
2011-07-25 12:34           ` Boojin Kim
2011-07-25 11:24   ` Jassi Brar
2011-07-25 11:24     ` Jassi Brar
2011-07-26 12:28     ` Boojin Kim
2011-07-26 12:28       ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 05/14] ARM: SAMSUNG: Update to use PL330-DMA driver Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25 10:52   ` Vinod Koul
2011-07-25 10:52     ` Vinod Koul
2011-07-25 11:31   ` Jassi Brar
2011-07-25 11:31     ` Jassi Brar
2011-07-25  1:28 ` [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25  9:36   ` Russell King - ARM Linux
2011-07-25  9:36     ` Russell King - ARM Linux
2011-07-25  9:57     ` Boojin Kim
2011-07-25  9:57       ` Boojin Kim
2011-07-25 11:51   ` Jassi Brar
2011-07-25 11:51     ` Jassi Brar
2011-07-26  8:02     ` Russell King - ARM Linux
2011-07-26  8:02       ` Russell King - ARM Linux
2011-07-26 17:43       ` Jassi Brar
2011-07-26 17:43         ` Jassi Brar
2011-07-26 18:14         ` Russell King - ARM Linux
2011-07-26 18:14           ` Russell King - ARM Linux
2011-07-26 19:54           ` Jassi Brar
2011-07-26 19:54             ` Jassi Brar
2011-07-26  9:35     ` Boojin Kim
2011-07-26  9:35       ` Boojin Kim
2011-07-27  1:33       ` Jassi Brar
2011-07-27  1:33         ` Jassi Brar
2011-07-27  5:17         ` Boojin Kim
2011-07-27  5:17           ` Boojin Kim
2011-07-27  7:57           ` Jassi Brar
2011-07-27  7:57             ` Jassi Brar
2011-07-28  0:38             ` Boojin Kim
2011-07-28  0:38               ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 07/14] ARM: EXYNOS4: Use generic DMA PL330 driver Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25 11:59   ` Jassi Brar
2011-07-25 11:59     ` Jassi Brar
2011-07-25 12:59     ` Boojin Kim
2011-07-25 12:59       ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 08/14] ARM: S5PV210: " Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 09/14] ARM: S5PC100: " Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 10/14] ARM: S5P64X0: " Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 11/14] ARM: SAMSUNG: Remove S3C-PL330-DMA driver Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25  1:28 ` Boojin Kim [this message]
2011-07-25  1:28   ` [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API Boojin Kim
2011-07-25  9:40   ` Russell King - ARM Linux
2011-07-25  9:40     ` Russell King - ARM Linux
2011-07-25 10:34     ` Boojin Kim
2011-07-25 10:34       ` Boojin Kim
2011-07-25 11:17   ` Vinod Koul
2011-07-25 11:17     ` Vinod Koul
2011-07-26  9:31     ` Boojin Kim
2011-07-26  9:31       ` Boojin Kim
2011-07-26 10:14       ` Vinod Koul
2011-07-26 10:14         ` Vinod Koul
2011-07-27  5:05         ` Boojin Kim
2011-07-27  5:05           ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 13/14] ASoC: Samsung: Update DMA interface Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25  1:28 ` [PATCH V4 14/14] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction Boojin Kim
2011-07-25  1:28   ` Boojin Kim
2011-07-25 12:08   ` Jassi Brar
2011-07-25 12:08     ` Jassi Brar
2011-07-25 21:15     ` Grant Likely
2011-07-25 21:15       ` Grant Likely
2011-07-28  1:23       ` Boojin Kim
2011-07-28  1:23         ` Boojin Kim
2011-07-25 10:17 ` [RESEND] [PATCH V4 0/14] To use DMA generic APIs for Samsung DMA Vinod Koul
2011-07-25 10:17   ` Vinod Koul
2011-07-25 11:09   ` Vinod Koul
2011-07-25 11:09     ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1311557312-26107-13-git-send-email-boojin.kim@samsung.com \
    --to=boojin.kim@samsung.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dan.j.williams@intel.com \
    --cc=grant.likely@secretlab.ca \
    --cc=jassisinghbrar@gmail.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.