[PATCH v2 0/2] Add device tree probe for i2c-imx driver

[PATCH v2 0/2] Add device tree probe for i2c-imx driver

[Shawn Guo]

The first patch removes unused init/exit hooks from platform data,
and the second one actually adds the actual device tree probe support.

Changes since v1:
 * Fix a couple of typo in fsl-imx-i2c.txt

Shawn Guo (2):
      i2c/imx: remove init/exit hooks from platform data
      i2c/imx: add device tree probe support

 .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |   25 +++++++++++
 arch/arm/plat-mxc/include/mach/i2c.h               |    4 --
 drivers/i2c/busses/i2c-imx.c                       |   46 +++++++++----------
 3 files changed, 47 insertions(+), 28 deletions(-)

[PATCH v2 0/2] Add device tree probe for i2c-imx driver

[Shawn Guo]

The first patch removes unused init/exit hooks from platform data,
and the second one actually adds the actual device tree probe support.

Changes since v1:
 * Fix a couple of typo in fsl-imx-i2c.txt

Shawn Guo (2):
      i2c/imx: remove init/exit hooks from platform data
      i2c/imx: add device tree probe support

 .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |   25 +++++++++++
 arch/arm/plat-mxc/include/mach/i2c.h               |    4 --
 drivers/i2c/busses/i2c-imx.c                       |   46 +++++++++----------
 3 files changed, 47 insertions(+), 28 deletions(-)

[PATCH v2 1/2] i2c/imx: remove init/exit hooks from platform data

[Shawn Guo]

The init/exit hooks in platform data are being used nowhere, so can
be removed.

Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/plat-mxc/include/mach/i2c.h |    4 ----
 drivers/i2c/busses/i2c-imx.c         |   21 +++------------------
 2 files changed, 3 insertions(+), 22 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 4a5dc5c..375cdd0 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -11,14 +11,10 @@
 
 /**
  * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @init:	Initialise gpio's and other board specific things
- * @exit:	Free everything initialised by @init
  * @bitrate:	Bus speed measured in Hz
  *
  **/
 struct imxi2c_platform_data {
-	int (*init)(struct device *dev);
-	void (*exit)(struct device *dev);
 	int bitrate;
 };
 
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 4c2a62b..54d809e 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -466,7 +466,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 {
 	struct imx_i2c_struct *i2c_imx;
 	struct resource *res;
-	struct imxi2c_platform_data *pdata;
+	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
 	void __iomem *base;
 	resource_size_t res_size;
 	int irq;
@@ -485,19 +485,11 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	pdata = pdev->dev.platform_data;
-
-	if (pdata && pdata->init) {
-		ret = pdata->init(&pdev->dev);
-		if (ret)
-			return ret;
-	}
-
 	res_size = resource_size(res);
 
 	if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
-		ret = -EBUSY;
-		goto fail0;
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		return -EBUSY;
 	}
 
 	base = ioremap(res->start, res_size);
@@ -586,9 +578,6 @@ fail2:
 	iounmap(base);
 fail1:
 	release_mem_region(res->start, resource_size(res));
-fail0:
-	if (pdata && pdata->exit)
-		pdata->exit(&pdev->dev);
 	return ret; /* Return error number */
 }
 
@@ -611,10 +600,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
 	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
 
-	/* Shut down hardware */
-	if (pdata && pdata->exit)
-		pdata->exit(&pdev->dev);
-
 	clk_put(i2c_imx->clk);
 
 	iounmap(i2c_imx->base);
-- 
1.7.4.1

[PATCH v2 1/2] i2c/imx: remove init/exit hooks from platform data

[Shawn Guo]

The init/exit hooks in platform data are being used nowhere, so can
be removed.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/i2c.h |    4 ----
 drivers/i2c/busses/i2c-imx.c         |   21 +++------------------
 2 files changed, 3 insertions(+), 22 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 4a5dc5c..375cdd0 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -11,14 +11,10 @@
 
 /**
  * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @init:	Initialise gpio's and other board specific things
- * @exit:	Free everything initialised by @init
  * @bitrate:	Bus speed measured in Hz
  *
  **/
 struct imxi2c_platform_data {
-	int (*init)(struct device *dev);
-	void (*exit)(struct device *dev);
 	int bitrate;
 };
 
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 4c2a62b..54d809e 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -466,7 +466,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 {
 	struct imx_i2c_struct *i2c_imx;
 	struct resource *res;
-	struct imxi2c_platform_data *pdata;
+	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
 	void __iomem *base;
 	resource_size_t res_size;
 	int irq;
@@ -485,19 +485,11 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	pdata = pdev->dev.platform_data;
-
-	if (pdata && pdata->init) {
-		ret = pdata->init(&pdev->dev);
-		if (ret)
-			return ret;
-	}
-
 	res_size = resource_size(res);
 
 	if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
-		ret = -EBUSY;
-		goto fail0;
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		return -EBUSY;
 	}
 
 	base = ioremap(res->start, res_size);
@@ -586,9 +578,6 @@ fail2:
 	iounmap(base);
 fail1:
 	release_mem_region(res->start, resource_size(res));
-fail0:
-	if (pdata && pdata->exit)
-		pdata->exit(&pdev->dev);
 	return ret; /* Return error number */
 }
 
@@ -611,10 +600,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
 	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
 
-	/* Shut down hardware */
-	if (pdata && pdata->exit)
-		pdata->exit(&pdev->dev);
-
 	clk_put(i2c_imx->clk);
 
 	iounmap(i2c_imx->base);
-- 
1.7.4.1

[PATCH v2 2/2] i2c/imx: add device tree probe support

[Shawn Guo]

It adds device tree probe support for i2c-imx driver.

Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
---
 .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |   25 ++++++++++++++++++++
 drivers/i2c/busses/i2c-imx.c                       |   25 +++++++++++++++----
 2 files changed, 44 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt

diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
new file mode 100644
index 0000000..f3cf43b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -0,0 +1,25 @@
+* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C/HS-I2C registers location and length
+- interrupts : Should contain I2C/HS-I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+  The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c@83fc4000 { /* I2C2 on i.MX51 */
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	reg = <0x83fc4000 0x4000>;
+	interrupts = <63>;
+};
+
+i2c@70038000 { /* HS-I2C on i.MX51 */
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	reg = <0x70038000 0x4000>;
+	interrupts = <64>;
+	clock-frequency = <400000>;
+};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 54d809e..58832e5 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,9 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
@@ -125,6 +128,11 @@ struct imx_i2c_struct {
 	unsigned int		ifdr; /* IMX_I2C_IFDR */
 };
 
+static const struct of_device_id i2c_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx1-i2c", },
+	{ /* sentinel */ }
+};
+
 /** Functions for IMX I2C adapter driver ***************************************
 *******************************************************************************/
 
@@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
 	void __iomem *base;
 	resource_size_t res_size;
-	int irq;
+	int irq, bitrate;
 	int ret;
 
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx->adapter.algo		= &i2c_imx_algo;
 	i2c_imx->adapter.dev.parent	= &pdev->dev;
 	i2c_imx->adapter.nr 		= pdev->id;
+	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
 	i2c_imx->irq			= irq;
 	i2c_imx->base			= base;
 	i2c_imx->res			= res;
@@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
 
 	/* Set up clock divider */
-	if (pdata && pdata->bitrate)
-		i2c_imx_set_clk(i2c_imx, pdata->bitrate);
-	else
-		i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+	bitrate = IMX_I2C_BIT_RATE;
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "clock-frequency", &bitrate);
+	if (ret < 0 && pdata && pdata->bitrate)
+		bitrate = pdata->bitrate;
+	i2c_imx_set_clk(i2c_imx, bitrate);
 
 	/* Set up chip registers to defaults */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
@@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		goto fail5;
 	}
 
+	of_i2c_register_devices(&i2c_imx->adapter);
+
 	/* Set up platform driver data */
 	platform_set_drvdata(pdev, i2c_imx);
 
@@ -584,7 +597,6 @@ fail1:
 static int __exit i2c_imx_remove(struct platform_device *pdev)
 {
 	struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
-	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
 
 	/* remove adapter */
 	dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
 	.driver	= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = i2c_imx_dt_ids,
 	}
 };
 
-- 
1.7.4.1

[PATCH v2 2/2] i2c/imx: add device tree probe support

[Shawn Guo]

It adds device tree probe support for i2c-imx driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
---
 .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |   25 ++++++++++++++++++++
 drivers/i2c/busses/i2c-imx.c                       |   25 +++++++++++++++----
 2 files changed, 44 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt

diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
new file mode 100644
index 0000000..f3cf43b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -0,0 +1,25 @@
+* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C/HS-I2C registers location and length
+- interrupts : Should contain I2C/HS-I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+  The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c at 83fc4000 { /* I2C2 on i.MX51 */
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	reg = <0x83fc4000 0x4000>;
+	interrupts = <63>;
+};
+
+i2c at 70038000 { /* HS-I2C on i.MX51 */
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	reg = <0x70038000 0x4000>;
+	interrupts = <64>;
+	clock-frequency = <400000>;
+};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 54d809e..58832e5 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,9 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
@@ -125,6 +128,11 @@ struct imx_i2c_struct {
 	unsigned int		ifdr; /* IMX_I2C_IFDR */
 };
 
+static const struct of_device_id i2c_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx1-i2c", },
+	{ /* sentinel */ }
+};
+
 /** Functions for IMX I2C adapter driver ***************************************
 *******************************************************************************/
 
@@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
 	void __iomem *base;
 	resource_size_t res_size;
-	int irq;
+	int irq, bitrate;
 	int ret;
 
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx->adapter.algo		= &i2c_imx_algo;
 	i2c_imx->adapter.dev.parent	= &pdev->dev;
 	i2c_imx->adapter.nr 		= pdev->id;
+	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
 	i2c_imx->irq			= irq;
 	i2c_imx->base			= base;
 	i2c_imx->res			= res;
@@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
 
 	/* Set up clock divider */
-	if (pdata && pdata->bitrate)
-		i2c_imx_set_clk(i2c_imx, pdata->bitrate);
-	else
-		i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+	bitrate = IMX_I2C_BIT_RATE;
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "clock-frequency", &bitrate);
+	if (ret < 0 && pdata && pdata->bitrate)
+		bitrate = pdata->bitrate;
+	i2c_imx_set_clk(i2c_imx, bitrate);
 
 	/* Set up chip registers to defaults */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
@@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		goto fail5;
 	}
 
+	of_i2c_register_devices(&i2c_imx->adapter);
+
 	/* Set up platform driver data */
 	platform_set_drvdata(pdev, i2c_imx);
 
@@ -584,7 +597,6 @@ fail1:
 static int __exit i2c_imx_remove(struct platform_device *pdev)
 {
 	struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
-	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
 
 	/* remove adapter */
 	dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
 	.driver	= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = i2c_imx_dt_ids,
 	}
 };
 
-- 
1.7.4.1

Re: [PATCH v2 2/2] i2c/imx: add device tree probe support

[Ben Dooks]

On Sun, Jul 31, 2011 at 02:21:27AM +0800, Shawn Guo wrote:
> It adds device tree probe support for i2c-imx driver.
> 
> Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
> Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> ---
>  .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |   25 ++++++++++++++++++++
>  drivers/i2c/busses/i2c-imx.c                       |   25 +++++++++++++++----
>  2 files changed, 44 insertions(+), 6 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> new file mode 100644
> index 0000000..f3cf43b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> @@ -0,0 +1,25 @@
> +* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
> +
> +Required properties:
> +- compatible : Should be "fsl,<chip>-i2c"
> +- reg : Should contain I2C/HS-I2C registers location and length
> +- interrupts : Should contain I2C/HS-I2C interrupt
> +
> +Optional properties:
> +- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
> +  The absence of the propoerty indicates the default frequency 100 kHz.
> +
> +Examples:
> +
> +i2c@83fc4000 { /* I2C2 on i.MX51 */
> +	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> +	reg = <0x83fc4000 0x4000>;
> +	interrupts = <63>;
> +};
> +
> +i2c@70038000 { /* HS-I2C on i.MX51 */
> +	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> +	reg = <0x70038000 0x4000>;
> +	interrupts = <64>;
> +	clock-frequency = <400000>;
> +};

It occurs to me that the clock-frequency field should be a standard
used by all of-i2c drivers? could we have a standardised set of
properties and a standard chunk of code that reads them?

> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 54d809e..58832e5 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -48,6 +48,9 @@
>  #include <linux/platform_device.h>
>  #include <linux/clk.h>
>  #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_i2c.h>
>  
>  #include <mach/irqs.h>
>  #include <mach/hardware.h>
> @@ -125,6 +128,11 @@ struct imx_i2c_struct {
>  	unsigned int		ifdr; /* IMX_I2C_IFDR */
>  };
>  
> +static const struct of_device_id i2c_imx_dt_ids[] = {
> +	{ .compatible = "fsl,imx1-i2c", },
> +	{ /* sentinel */ }
> +};
> +
>  /** Functions for IMX I2C adapter driver ***************************************
>  *******************************************************************************/
>  
> @@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>  	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>  	void __iomem *base;
>  	resource_size_t res_size;
> -	int irq;
> +	int irq, bitrate;
>  	int ret;
>  
>  	dev_dbg(&pdev->dev, "<%s>\n", __func__);
> @@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>  	i2c_imx->adapter.algo		= &i2c_imx_algo;
>  	i2c_imx->adapter.dev.parent	= &pdev->dev;
>  	i2c_imx->adapter.nr 		= pdev->id;
> +	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
>  	i2c_imx->irq			= irq;
>  	i2c_imx->base			= base;
>  	i2c_imx->res			= res;
> @@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>  	i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
>  
>  	/* Set up clock divider */
> -	if (pdata && pdata->bitrate)
> -		i2c_imx_set_clk(i2c_imx, pdata->bitrate);
> -	else
> -		i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
> +	bitrate = IMX_I2C_BIT_RATE;
> +	ret = of_property_read_u32(pdev->dev.of_node,
> +				   "clock-frequency", &bitrate);
> +	if (ret < 0 && pdata && pdata->bitrate)
> +		bitrate = pdata->bitrate;
> +	i2c_imx_set_clk(i2c_imx, bitrate);
>  
>  	/* Set up chip registers to defaults */
>  	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
> @@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>  		goto fail5;
>  	}
>  
> +	of_i2c_register_devices(&i2c_imx->adapter);
> +
>  	/* Set up platform driver data */
>  	platform_set_drvdata(pdev, i2c_imx);
>  
> @@ -584,7 +597,6 @@ fail1:
>  static int __exit i2c_imx_remove(struct platform_device *pdev)
>  {
>  	struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
> -	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>  
>  	/* remove adapter */
>  	dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
> @@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
>  	.driver	= {
>  		.name	= DRIVER_NAME,
>  		.owner	= THIS_MODULE,
> +		.of_match_table = i2c_imx_dt_ids,
>  	}
>  };
>  
> -- 
> 1.7.4.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/2] i2c/imx: add device tree probe support

[Ben Dooks]

On Sun, Jul 31, 2011 at 02:21:27AM +0800, Shawn Guo wrote:
> It adds device tree probe support for i2c-imx driver.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Darius Augulis <augulis.darius@gmail.com>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
> ---
>  .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |   25 ++++++++++++++++++++
>  drivers/i2c/busses/i2c-imx.c                       |   25 +++++++++++++++----
>  2 files changed, 44 insertions(+), 6 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> new file mode 100644
> index 0000000..f3cf43b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> @@ -0,0 +1,25 @@
> +* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
> +
> +Required properties:
> +- compatible : Should be "fsl,<chip>-i2c"
> +- reg : Should contain I2C/HS-I2C registers location and length
> +- interrupts : Should contain I2C/HS-I2C interrupt
> +
> +Optional properties:
> +- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
> +  The absence of the propoerty indicates the default frequency 100 kHz.
> +
> +Examples:
> +
> +i2c at 83fc4000 { /* I2C2 on i.MX51 */
> +	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> +	reg = <0x83fc4000 0x4000>;
> +	interrupts = <63>;
> +};
> +
> +i2c at 70038000 { /* HS-I2C on i.MX51 */
> +	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> +	reg = <0x70038000 0x4000>;
> +	interrupts = <64>;
> +	clock-frequency = <400000>;
> +};

It occurs to me that the clock-frequency field should be a standard
used by all of-i2c drivers? could we have a standardised set of
properties and a standard chunk of code that reads them?

> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 54d809e..58832e5 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -48,6 +48,9 @@
>  #include <linux/platform_device.h>
>  #include <linux/clk.h>
>  #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_i2c.h>
>  
>  #include <mach/irqs.h>
>  #include <mach/hardware.h>
> @@ -125,6 +128,11 @@ struct imx_i2c_struct {
>  	unsigned int		ifdr; /* IMX_I2C_IFDR */
>  };
>  
> +static const struct of_device_id i2c_imx_dt_ids[] = {
> +	{ .compatible = "fsl,imx1-i2c", },
> +	{ /* sentinel */ }
> +};
> +
>  /** Functions for IMX I2C adapter driver ***************************************
>  *******************************************************************************/
>  
> @@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>  	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>  	void __iomem *base;
>  	resource_size_t res_size;
> -	int irq;
> +	int irq, bitrate;
>  	int ret;
>  
>  	dev_dbg(&pdev->dev, "<%s>\n", __func__);
> @@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>  	i2c_imx->adapter.algo		= &i2c_imx_algo;
>  	i2c_imx->adapter.dev.parent	= &pdev->dev;
>  	i2c_imx->adapter.nr 		= pdev->id;
> +	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
>  	i2c_imx->irq			= irq;
>  	i2c_imx->base			= base;
>  	i2c_imx->res			= res;
> @@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>  	i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
>  
>  	/* Set up clock divider */
> -	if (pdata && pdata->bitrate)
> -		i2c_imx_set_clk(i2c_imx, pdata->bitrate);
> -	else
> -		i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
> +	bitrate = IMX_I2C_BIT_RATE;
> +	ret = of_property_read_u32(pdev->dev.of_node,
> +				   "clock-frequency", &bitrate);
> +	if (ret < 0 && pdata && pdata->bitrate)
> +		bitrate = pdata->bitrate;
> +	i2c_imx_set_clk(i2c_imx, bitrate);
>  
>  	/* Set up chip registers to defaults */
>  	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
> @@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>  		goto fail5;
>  	}
>  
> +	of_i2c_register_devices(&i2c_imx->adapter);
> +
>  	/* Set up platform driver data */
>  	platform_set_drvdata(pdev, i2c_imx);
>  
> @@ -584,7 +597,6 @@ fail1:
>  static int __exit i2c_imx_remove(struct platform_device *pdev)
>  {
>  	struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
> -	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>  
>  	/* remove adapter */
>  	dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
> @@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
>  	.driver	= {
>  		.name	= DRIVER_NAME,
>  		.owner	= THIS_MODULE,
> +		.of_match_table = i2c_imx_dt_ids,
>  	}
>  };
>  
> -- 
> 1.7.4.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/2] i2c/imx: add device tree probe support

[Shawn Guo]

On 1 August 2011 22:25, Ben Dooks <ben-i2c-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org> wrote:
> On Sun, Jul 31, 2011 at 02:21:27AM +0800, Shawn Guo wrote:
>> It adds device tree probe support for i2c-imx driver.
>>
>> Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
>> Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
>> Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
>> ---
>>  .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |   25 ++++++++++++++++++++
>>  drivers/i2c/busses/i2c-imx.c                       |   25 +++++++++++++++----
>>  2 files changed, 44 insertions(+), 6 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
>> new file mode 100644
>> index 0000000..f3cf43b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
>> @@ -0,0 +1,25 @@
>> +* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
>> +
>> +Required properties:
>> +- compatible : Should be "fsl,<chip>-i2c"
>> +- reg : Should contain I2C/HS-I2C registers location and length
>> +- interrupts : Should contain I2C/HS-I2C interrupt
>> +
>> +Optional properties:
>> +- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
>> +  The absence of the propoerty indicates the default frequency 100 kHz.
>> +
>> +Examples:
>> +
>> +i2c@83fc4000 { /* I2C2 on i.MX51 */
>> +     compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
>> +     reg = <0x83fc4000 0x4000>;
>> +     interrupts = <63>;
>> +};
>> +
>> +i2c@70038000 { /* HS-I2C on i.MX51 */
>> +     compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
>> +     reg = <0x70038000 0x4000>;
>> +     interrupts = <64>;
>> +     clock-frequency = <400000>;
>> +};
>
> It occurs to me that the clock-frequency field should be a standard
> used by all of-i2c drivers? could we have a standardised set of
> properties and a standard chunk of code that reads them?
>
Yes, "clock-frequency" is a common property for all clock frequency
binding, not only for of-i2c but all drivers that need to get clock
frequency from device tree.  And it's a u32 and being read by the
common OF API of_property_read_u32().  So to answer your question,
both the binding and code have already been standard.

Regards,
Shawn

>> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
>> index 54d809e..58832e5 100644
>> --- a/drivers/i2c/busses/i2c-imx.c
>> +++ b/drivers/i2c/busses/i2c-imx.c
>> @@ -48,6 +48,9 @@
>>  #include <linux/platform_device.h>
>>  #include <linux/clk.h>
>>  #include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_i2c.h>
>>
>>  #include <mach/irqs.h>
>>  #include <mach/hardware.h>
>> @@ -125,6 +128,11 @@ struct imx_i2c_struct {
>>       unsigned int            ifdr; /* IMX_I2C_IFDR */
>>  };
>>
>> +static const struct of_device_id i2c_imx_dt_ids[] = {
>> +     { .compatible = "fsl,imx1-i2c", },
>> +     { /* sentinel */ }
>> +};
>> +
>>  /** Functions for IMX I2C adapter driver ***************************************
>>  *******************************************************************************/
>>
>> @@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>>       struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>>       void __iomem *base;
>>       resource_size_t res_size;
>> -     int irq;
>> +     int irq, bitrate;
>>       int ret;
>>
>>       dev_dbg(&pdev->dev, "<%s>\n", __func__);
>> @@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>>       i2c_imx->adapter.algo           = &i2c_imx_algo;
>>       i2c_imx->adapter.dev.parent     = &pdev->dev;
>>       i2c_imx->adapter.nr             = pdev->id;
>> +     i2c_imx->adapter.dev.of_node    = pdev->dev.of_node;
>>       i2c_imx->irq                    = irq;
>>       i2c_imx->base                   = base;
>>       i2c_imx->res                    = res;
>> @@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>>       i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
>>
>>       /* Set up clock divider */
>> -     if (pdata && pdata->bitrate)
>> -             i2c_imx_set_clk(i2c_imx, pdata->bitrate);
>> -     else
>> -             i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
>> +     bitrate = IMX_I2C_BIT_RATE;
>> +     ret = of_property_read_u32(pdev->dev.of_node,
>> +                                "clock-frequency", &bitrate);
>> +     if (ret < 0 && pdata && pdata->bitrate)
>> +             bitrate = pdata->bitrate;
>> +     i2c_imx_set_clk(i2c_imx, bitrate);
>>
>>       /* Set up chip registers to defaults */
>>       writeb(0, i2c_imx->base + IMX_I2C_I2CR);
>> @@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>>               goto fail5;
>>       }
>>
>> +     of_i2c_register_devices(&i2c_imx->adapter);
>> +
>>       /* Set up platform driver data */
>>       platform_set_drvdata(pdev, i2c_imx);
>>
>> @@ -584,7 +597,6 @@ fail1:
>>  static int __exit i2c_imx_remove(struct platform_device *pdev)
>>  {
>>       struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
>> -     struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>>
>>       /* remove adapter */
>>       dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
>> @@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
>>       .driver = {
>>               .name   = DRIVER_NAME,
>>               .owner  = THIS_MODULE,
>> +             .of_match_table = i2c_imx_dt_ids,
>>       }
>>  };
>>
>> --
>> 1.7.4.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

[PATCH v2 2/2] i2c/imx: add device tree probe support

[Shawn Guo]

On 1 August 2011 22:25, Ben Dooks <ben-i2c@fluff.org> wrote:
> On Sun, Jul 31, 2011 at 02:21:27AM +0800, Shawn Guo wrote:
>> It adds device tree probe support for i2c-imx driver.
>>
>> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
>> Cc: Grant Likely <grant.likely@secretlab.ca>
>> Cc: Darius Augulis <augulis.darius@gmail.com>
>> Cc: Ben Dooks <ben-linux@fluff.org>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>> ---
>> ?.../devicetree/bindings/i2c/fsl-imx-i2c.txt ? ? ? ?| ? 25 ++++++++++++++++++++
>> ?drivers/i2c/busses/i2c-imx.c ? ? ? ? ? ? ? ? ? ? ? | ? 25 +++++++++++++++----
>> ?2 files changed, 44 insertions(+), 6 deletions(-)
>> ?create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
>> new file mode 100644
>> index 0000000..f3cf43b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
>> @@ -0,0 +1,25 @@
>> +* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
>> +
>> +Required properties:
>> +- compatible : Should be "fsl,<chip>-i2c"
>> +- reg : Should contain I2C/HS-I2C registers location and length
>> +- interrupts : Should contain I2C/HS-I2C interrupt
>> +
>> +Optional properties:
>> +- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
>> + ?The absence of the propoerty indicates the default frequency 100 kHz.
>> +
>> +Examples:
>> +
>> +i2c at 83fc4000 { /* I2C2 on i.MX51 */
>> + ? ? compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
>> + ? ? reg = <0x83fc4000 0x4000>;
>> + ? ? interrupts = <63>;
>> +};
>> +
>> +i2c at 70038000 { /* HS-I2C on i.MX51 */
>> + ? ? compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
>> + ? ? reg = <0x70038000 0x4000>;
>> + ? ? interrupts = <64>;
>> + ? ? clock-frequency = <400000>;
>> +};
>
> It occurs to me that the clock-frequency field should be a standard
> used by all of-i2c drivers? could we have a standardised set of
> properties and a standard chunk of code that reads them?
>
Yes, "clock-frequency" is a common property for all clock frequency
binding, not only for of-i2c but all drivers that need to get clock
frequency from device tree.  And it's a u32 and being read by the
common OF API of_property_read_u32().  So to answer your question,
both the binding and code have already been standard.

Regards,
Shawn

>> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
>> index 54d809e..58832e5 100644
>> --- a/drivers/i2c/busses/i2c-imx.c
>> +++ b/drivers/i2c/busses/i2c-imx.c
>> @@ -48,6 +48,9 @@
>> ?#include <linux/platform_device.h>
>> ?#include <linux/clk.h>
>> ?#include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_i2c.h>
>>
>> ?#include <mach/irqs.h>
>> ?#include <mach/hardware.h>
>> @@ -125,6 +128,11 @@ struct imx_i2c_struct {
>> ? ? ? unsigned int ? ? ? ? ? ?ifdr; /* IMX_I2C_IFDR */
>> ?};
>>
>> +static const struct of_device_id i2c_imx_dt_ids[] = {
>> + ? ? { .compatible = "fsl,imx1-i2c", },
>> + ? ? { /* sentinel */ }
>> +};
>> +
>> ?/** Functions for IMX I2C adapter driver ***************************************
>> ?*******************************************************************************/
>>
>> @@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>> ? ? ? struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>> ? ? ? void __iomem *base;
>> ? ? ? resource_size_t res_size;
>> - ? ? int irq;
>> + ? ? int irq, bitrate;
>> ? ? ? int ret;
>>
>> ? ? ? dev_dbg(&pdev->dev, "<%s>\n", __func__);
>> @@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>> ? ? ? i2c_imx->adapter.algo ? ? ? ? ? = &i2c_imx_algo;
>> ? ? ? i2c_imx->adapter.dev.parent ? ? = &pdev->dev;
>> ? ? ? i2c_imx->adapter.nr ? ? ? ? ? ? = pdev->id;
>> + ? ? i2c_imx->adapter.dev.of_node ? ?= pdev->dev.of_node;
>> ? ? ? i2c_imx->irq ? ? ? ? ? ? ? ? ? ?= irq;
>> ? ? ? i2c_imx->base ? ? ? ? ? ? ? ? ? = base;
>> ? ? ? i2c_imx->res ? ? ? ? ? ? ? ? ? ?= res;
>> @@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>> ? ? ? i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
>>
>> ? ? ? /* Set up clock divider */
>> - ? ? if (pdata && pdata->bitrate)
>> - ? ? ? ? ? ? i2c_imx_set_clk(i2c_imx, pdata->bitrate);
>> - ? ? else
>> - ? ? ? ? ? ? i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
>> + ? ? bitrate = IMX_I2C_BIT_RATE;
>> + ? ? ret = of_property_read_u32(pdev->dev.of_node,
>> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"clock-frequency", &bitrate);
>> + ? ? if (ret < 0 && pdata && pdata->bitrate)
>> + ? ? ? ? ? ? bitrate = pdata->bitrate;
>> + ? ? i2c_imx_set_clk(i2c_imx, bitrate);
>>
>> ? ? ? /* Set up chip registers to defaults */
>> ? ? ? writeb(0, i2c_imx->base + IMX_I2C_I2CR);
>> @@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
>> ? ? ? ? ? ? ? goto fail5;
>> ? ? ? }
>>
>> + ? ? of_i2c_register_devices(&i2c_imx->adapter);
>> +
>> ? ? ? /* Set up platform driver data */
>> ? ? ? platform_set_drvdata(pdev, i2c_imx);
>>
>> @@ -584,7 +597,6 @@ fail1:
>> ?static int __exit i2c_imx_remove(struct platform_device *pdev)
>> ?{
>> ? ? ? struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
>> - ? ? struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>>
>> ? ? ? /* remove adapter */
>> ? ? ? dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
>> @@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
>> ? ? ? .driver = {
>> ? ? ? ? ? ? ? .name ? = DRIVER_NAME,
>> ? ? ? ? ? ? ? .owner ?= THIS_MODULE,
>> + ? ? ? ? ? ? .of_match_table = i2c_imx_dt_ids,
>> ? ? ? }
>> ?};
>>
>> --
>> 1.7.4.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>