Re: [PATCH v2 1/3] watchdog: imx2_wdg: suspend watchdog in WAIT mode

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Am Dienstag, 25. Oktober 2022, 09:25:31 CEST schrieb Andrej Picej:
> Putting device into the "Suspend-To-Idle" mode causes watchdog to
> trigger and reset the board after set watchdog timeout period elapses.
> 
> Introduce new device-tree property "fsl,suspend-in-wait" which suspends
> watchdog in WAIT mode. This is done by setting WDW bit in WCR
> (Watchdog Control Register) Watchdog operation is restored after exiting
> WAIT mode as expected. WAIT mode coresponds with Linux's
> "Suspend-To-Idle".
> 
> Signed-off-by: Andrej Picej <andrej.picej@norik.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes in v2:
>  - validate the property with compatible string, as this functionality
>    is not supported by all devices.
> ---
>  drivers/watchdog/imx2_wdt.c | 37 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
> index d0c5d47ddede..dd9866c6f1e5 100644
> --- a/drivers/watchdog/imx2_wdt.c
> +++ b/drivers/watchdog/imx2_wdt.c
> @@ -35,6 +35,7 @@
> 
>  #define IMX2_WDT_WCR		0x00		/* Control 
Register */
>  #define IMX2_WDT_WCR_WT		(0xFF << 8)	/* -> 
Watchdog Timeout Field */
> +#define IMX2_WDT_WCR_WDW	BIT(7)		/* -> Watchdog disable 
for WAIT */
>  #define IMX2_WDT_WCR_WDA	BIT(5)		/* -> External Reset 
WDOG_B */
>  #define IMX2_WDT_WCR_SRS	BIT(4)		/* -> Software Reset 
Signal */
>  #define IMX2_WDT_WCR_WRE	BIT(3)		/* -> WDOG Reset Enable 
*/
> @@ -67,6 +68,27 @@ struct imx2_wdt_device {
>  	bool ext_reset;
>  	bool clk_is_on;
>  	bool no_ping;
> +	bool sleep_wait;
> +};
> +
> +static const char * const wdw_boards[] __initconst = {
> +	"fsl,imx25-wdt",
> +	"fsl,imx35-wdt",
> +	"fsl,imx50-wdt",
> +	"fsl,imx51-wdt",
> +	"fsl,imx53-wdt",
> +	"fsl,imx6q-wdt",
> +	"fsl,imx6sl-wdt",
> +	"fsl,imx6sll-wdt",
> +	"fsl,imx6sx-wdt",
> +	"fsl,imx6ul-wdt",
> +	"fsl,imx7d-wdt",
> +	"fsl,imx8mm-wdt",
> +	"fsl,imx8mn-wdt",
> +	"fsl,imx8mp-wdt",
> +	"fsl,imx8mq-wdt",
> +	"fsl,vf610-wdt",
> +	NULL
>  };

So the models listed in Documentation/devicetree/bindings/watchdog/fsl-imx-
wdt.yaml not supporting this feature are
* fsl,imx21-wdt
* fsl,imx27-wdt
* fsl,imx31-wdt
* fsl,ls1012a-wdt
* fsl,ls1043a-wdt
?

But all models are listed as compatible to fsl,imx21-wdt. So there is 
something wrong here. IMHO this sounds like the compatible list has to be 
split and updated. Depending on that this feature can be detected. Maintaining 
another list seems error prone to me.

Best regards,
Alexander

>  static bool nowayout = WATCHDOG_NOWAYOUT;
> @@ -129,6 +151,9 @@ static inline void imx2_wdt_setup(struct watchdog_device
> *wdog)
> 
>  	/* Suspend timer in low power mode, write once-only */
>  	val |= IMX2_WDT_WCR_WDZST;
> +	/* Suspend timer in low power WAIT mode, write once-only */
> +	if (wdev->sleep_wait)
> +		val |= IMX2_WDT_WCR_WDW;
>  	/* Strip the old watchdog Time-Out value */
>  	val &= ~IMX2_WDT_WCR_WT;
>  	/* Generate internal chip-level reset if WDOG times out */
> @@ -313,6 +338,18 @@ static int __init imx2_wdt_probe(struct platform_device
> *pdev)
> 
>  	wdev->ext_reset = of_property_read_bool(dev->of_node,
>  						"fsl,ext-
reset-output");
> +
> +	if (of_property_read_bool(dev->of_node, "fsl,suspend-in-wait"))
> +		if (of_device_compatible_match(dev->of_node, 
wdw_boards))
> +			wdev->sleep_wait = 1;
> +		else {
> +			dev_warn(dev, "Warning: Suspending watchdog 
during " \
> +				"WAIT mode is not supported for 
this device.\n");
> +			wdev->sleep_wait = 0;
> +		}
> +	else
> +		wdev->sleep_wait = 0;
> +
>  	/*
>  	 * The i.MX7D doesn't support low power mode, so we need to ping 
the
> watchdog * during suspend.





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel