[PATCH 0/4 v4] mmc: tmio, sdhi: provide multiple irq handlers

[PATCH 0/4 v4] mmc: tmio, sdhi: provide multiple irq handlers

[Simon Horman]

The SDHI driver already supports making use of up to three interrupt
sources.

This series breaks up the existing interrupt handler into three handlers,
one for card access, one for card detect interrupts, and one for SDIO
interrupts.  A cover-all handler, which makes use of these new broken-out
handlers is provided for for the case where there is only one interrupt
source.

This series also wires up the broken-out irq handlers in the SDHI driver

[PATCH 0/4 v4] mmc: tmio, sdhi: provide multiple irq handlers

[Simon Horman]

The SDHI driver already supports making use of up to three interrupt
sources.

This series breaks up the existing interrupt handler into three handlers,
one for card access, one for card detect interrupts, and one for SDIO
interrupts.  A cover-all handler, which makes use of these new broken-out
handlers is provided for for the case where there is only one interrupt
source.

This series also wires up the broken-out irq handlers in the SDHI driver

[PATCH 1/4] mmc: tmio: Cache interrupt masks

[Simon Horman]

This avoids the need to look up the masks each time an interrupt
is handled.

As suggested by Guennadi.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

---

* SDCARD portion tested on AP4/Mackerel
* SDIO portion untested

v3
* As suggested by Guennadi Liakhovetski
  - Only read sdcard_irq_mask once and never read sdio_irq_mask,
    instead use the cached values as much as possible

v2
* Initial release
---
 drivers/mmc/host/tmio_mmc.h     |    4 ++++
 drivers/mmc/host/tmio_mmc_pio.c |   34 ++++++++++++++++++----------------
 2 files changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index eeaf643..1cf8db5 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -79,6 +79,10 @@ struct tmio_mmc_host {
 	struct delayed_work	delayed_reset_work;
 	struct work_struct	done;
 
+	/* Cache IRQ mask */
+	u32			sdcard_irq_mask;
+	u32			sdio_irq_mask;
+
 	spinlock_t		lock;		/* protect host private data */
 	unsigned long		last_req_ts;
 	struct mutex		ios_lock;	/* protect set_ios() context */
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 1f16357..f0c7830 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -48,14 +48,14 @@
 
 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
 {
-	u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ);
-	sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
+	host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
+	sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
 }
 
 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
 {
-	u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ);
-	sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
+	host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ);
+	sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
 }
 
 static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
@@ -127,11 +127,13 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
 	if (enable) {
 		host->sdio_irq_enabled = 1;
+		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
+					~TMIO_SDIO_STAT_IOIRQ;
 		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK,
-			(TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ));
+		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
 	} else {
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL);
+		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
+		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
 		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
 		host->sdio_irq_enabled = 0;
 	}
@@ -548,26 +550,25 @@ irqreturn_t tmio_mmc_irq(int irq, void *devid)
 	struct tmio_mmc_host *host = devid;
 	struct mmc_host *mmc = host->mmc;
 	struct tmio_mmc_data *pdata = host->pdata;
-	unsigned int ireg, irq_mask, status;
-	unsigned int sdio_ireg, sdio_irq_mask, sdio_status;
+	unsigned int ireg, status;
+	unsigned int sdio_ireg, sdio_status;
 
 	pr_debug("MMC IRQ begin\n");
 
 	status = sd_ctrl_read32(host, CTL_STATUS);
-	irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
-	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+	ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
 
 	sdio_ireg = 0;
 	if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
 		sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
-		sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK);
-		sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask;
+		sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL &
+				~host->sdio_irq_mask;
 
 		sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
 
 		if (sdio_ireg && !host->sdio_irq_enabled) {
 			pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
-				   sdio_status, sdio_irq_mask, sdio_ireg);
+				   sdio_status, host->sdio_irq_mask, sdio_ireg);
 			tmio_mmc_enable_sdio_irq(mmc, 0);
 			goto out;
 		}
@@ -623,9 +624,9 @@ irqreturn_t tmio_mmc_irq(int irq, void *devid)
 	}
 
 	pr_warning("tmio_mmc: Spurious irq, disabling! "
-		"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
+		"0x%08x 0x%08x 0x%08x\n", status, host->sdcard_irq_mask, ireg);
 	pr_debug_status(status);
-	tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask);
+	tmio_mmc_disable_mmc_irqs(host, status & ~host->sdcard_irq_mask);
 
 out:
 	return IRQ_HANDLED;
@@ -882,6 +883,7 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	tmio_mmc_clk_stop(_host);
 	tmio_mmc_reset(_host);
 
+	_host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
 	tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
 	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
 		tmio_mmc_enable_sdio_irq(mmc, 0);
-- 
1.7.5.4

[PATCH 1/4] mmc: tmio: Cache interrupt masks

[Simon Horman]

This avoids the need to look up the masks each time an interrupt
is handled.

As suggested by Guennadi.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

---

* SDCARD portion tested on AP4/Mackerel
* SDIO portion untested

v3
* As suggested by Guennadi Liakhovetski
  - Only read sdcard_irq_mask once and never read sdio_irq_mask,
    instead use the cached values as much as possible

v2
* Initial release
---
 drivers/mmc/host/tmio_mmc.h     |    4 ++++
 drivers/mmc/host/tmio_mmc_pio.c |   34 ++++++++++++++++++----------------
 2 files changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index eeaf643..1cf8db5 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -79,6 +79,10 @@ struct tmio_mmc_host {
 	struct delayed_work	delayed_reset_work;
 	struct work_struct	done;
 
+	/* Cache IRQ mask */
+	u32			sdcard_irq_mask;
+	u32			sdio_irq_mask;
+
 	spinlock_t		lock;		/* protect host private data */
 	unsigned long		last_req_ts;
 	struct mutex		ios_lock;	/* protect set_ios() context */
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 1f16357..f0c7830 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -48,14 +48,14 @@
 
 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
 {
-	u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ);
-	sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
+	host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
+	sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
 }
 
 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
 {
-	u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ);
-	sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
+	host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ);
+	sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
 }
 
 static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
@@ -127,11 +127,13 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
 	if (enable) {
 		host->sdio_irq_enabled = 1;
+		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
+					~TMIO_SDIO_STAT_IOIRQ;
 		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK,
-			(TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ));
+		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
 	} else {
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL);
+		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
+		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
 		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
 		host->sdio_irq_enabled = 0;
 	}
@@ -548,26 +550,25 @@ irqreturn_t tmio_mmc_irq(int irq, void *devid)
 	struct tmio_mmc_host *host = devid;
 	struct mmc_host *mmc = host->mmc;
 	struct tmio_mmc_data *pdata = host->pdata;
-	unsigned int ireg, irq_mask, status;
-	unsigned int sdio_ireg, sdio_irq_mask, sdio_status;
+	unsigned int ireg, status;
+	unsigned int sdio_ireg, sdio_status;
 
 	pr_debug("MMC IRQ begin\n");
 
 	status = sd_ctrl_read32(host, CTL_STATUS);
-	irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
-	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+	ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
 
 	sdio_ireg = 0;
 	if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
 		sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
-		sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK);
-		sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask;
+		sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL &
+				~host->sdio_irq_mask;
 
 		sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
 
 		if (sdio_ireg && !host->sdio_irq_enabled) {
 			pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
-				   sdio_status, sdio_irq_mask, sdio_ireg);
+				   sdio_status, host->sdio_irq_mask, sdio_ireg);
 			tmio_mmc_enable_sdio_irq(mmc, 0);
 			goto out;
 		}
@@ -623,9 +624,9 @@ irqreturn_t tmio_mmc_irq(int irq, void *devid)
 	}
 
 	pr_warning("tmio_mmc: Spurious irq, disabling! "
-		"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
+		"0x%08x 0x%08x 0x%08x\n", status, host->sdcard_irq_mask, ireg);
 	pr_debug_status(status);
-	tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask);
+	tmio_mmc_disable_mmc_irqs(host, status & ~host->sdcard_irq_mask);
 
 out:
 	return IRQ_HANDLED;
@@ -882,6 +883,7 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	tmio_mmc_clk_stop(_host);
 	tmio_mmc_reset(_host);
 
+	_host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
 	tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
 	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
 		tmio_mmc_enable_sdio_irq(mmc, 0);
-- 
1.7.5.4

[PATCH 2/4] mmc: tmio: Provide separate interrupt handlers

[Simon Horman]

Provide separate interrupt handlers which may be used by platforms where
SDHI has three interrupt sources.

This patch also removes the commented-out handling of CRC and other errors.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

---

* SDCARD portion tested on AP4/Mackerel
* SDIO portion untested

v4
* As suggested by Guennadi Liakhovetski
  - Use bool as return type for __tmio_mmc_sdcard_irq() and
    __tmio_mmc_card_detect_irq()

v3
* Rebase for updated "mmc: tmio: Cache interrupt masks"
* As suggested by Guennadi Liakhovetski
  - Do not alter logic to handle more than one interupt at once
  - Add missing "static" to declartion of __tmio_mmc_sdcard_irq()

v2
* As suggested by Guennadi Liakhovetski
  - Combine 3 patches into one
  - Reduce the number of __tmio_..._irq() functions
  - Rename "...card_access..." functions as "...sdcard..."
---
 drivers/mmc/host/tmio_mmc.h     |    3 +
 drivers/mmc/host/tmio_mmc_pio.c |  131 ++++++++++++++++++++++++--------------
 2 files changed, 86 insertions(+), 48 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 1cf8db5..3020f98 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -97,6 +97,9 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host);
 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
 irqreturn_t tmio_mmc_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid);
 
 static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg,
 					 unsigned long *flags)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index f0c7830..6275e3d 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -545,44 +545,20 @@ out:
 	spin_unlock(&host->lock);
 }
 
-irqreturn_t tmio_mmc_irq(int irq, void *devid)
+static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host,
+				       int *ireg, int *status)
 {
-	struct tmio_mmc_host *host = devid;
-	struct mmc_host *mmc = host->mmc;
-	struct tmio_mmc_data *pdata = host->pdata;
-	unsigned int ireg, status;
-	unsigned int sdio_ireg, sdio_status;
-
-	pr_debug("MMC IRQ begin\n");
-
-	status = sd_ctrl_read32(host, CTL_STATUS);
-	ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
+	*status = sd_ctrl_read32(host, CTL_STATUS);
+	*ireg = *status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
 
-	sdio_ireg = 0;
-	if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
-		sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
-		sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL &
-				~host->sdio_irq_mask;
-
-		sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
-
-		if (sdio_ireg && !host->sdio_irq_enabled) {
-			pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
-				   sdio_status, host->sdio_irq_mask, sdio_ireg);
-			tmio_mmc_enable_sdio_irq(mmc, 0);
-			goto out;
-		}
-
-		if (mmc->caps & MMC_CAP_SDIO_IRQ &&
-			sdio_ireg & TMIO_SDIO_STAT_IOIRQ)
-			mmc_signal_sdio_irq(mmc);
-
-		if (sdio_ireg)
-			goto out;
-	}
+	pr_debug_status(*status);
+	pr_debug_status(*ireg);
+}
 
-	pr_debug_status(status);
-	pr_debug_status(ireg);
+static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
+				      int ireg, int status)
+{
+	struct mmc_host *mmc = host->mmc;
 
 	/* Card insert / remove attempts */
 	if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
@@ -592,43 +568,102 @@ irqreturn_t tmio_mmc_irq(int irq, void *devid)
 		     ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
 		    !work_pending(&mmc->detect.work))
 			mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-		goto out;
+		return true;
 	}
 
-	/* CRC and other errors */
-/*	if (ireg & TMIO_STAT_ERR_IRQ)
- *		handled |= tmio_error_irq(host, irq, stat);
- */
+	return false;
+}
+
+irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid)
+{
+	unsigned int ireg, status;
+	struct tmio_mmc_host *host = devid;
 
+	tmio_mmc_card_irq_status(host, &ireg, &status);
+	__tmio_mmc_card_detect_irq(host, ireg, status);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_card_detect_irq);
+
+static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host,
+				 int ireg, int status)
+{
 	/* Command completion */
 	if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
 		tmio_mmc_ack_mmc_irqs(host,
 			     TMIO_STAT_CMDRESPEND |
 			     TMIO_STAT_CMDTIMEOUT);
 		tmio_mmc_cmd_irq(host, status);
-		goto out;
+		return true;
 	}
 
 	/* Data transfer */
 	if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
 		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
 		tmio_mmc_pio_irq(host);
-		goto out;
+		return true;
 	}
 
 	/* Data transfer completion */
 	if (ireg & TMIO_STAT_DATAEND) {
 		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
 		tmio_mmc_data_irq(host);
-		goto out;
+		return true;
 	}
 
-	pr_warning("tmio_mmc: Spurious irq, disabling! "
-		"0x%08x 0x%08x 0x%08x\n", status, host->sdcard_irq_mask, ireg);
-	pr_debug_status(status);
-	tmio_mmc_disable_mmc_irqs(host, status & ~host->sdcard_irq_mask);
+	return false;
+}
+
+irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid)
+{
+	unsigned int ireg, status;
+	struct tmio_mmc_host *host = devid;
+
+	tmio_mmc_card_irq_status(host, &ireg, &status);
+	__tmio_mmc_sdcard_irq(host, ireg, status);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_sdcard_irq);
+
+irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid)
+{
+	struct tmio_mmc_host *host = devid;
+	struct mmc_host *mmc = host->mmc;
+	struct tmio_mmc_data *pdata = host->pdata;
+	unsigned int ireg, status;
+
+	if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
+		return IRQ_HANDLED;
+
+	status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
+	ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
+
+	sd_ctrl_write16(host, CTL_SDIO_STATUS, status & ~TMIO_SDIO_MASK_ALL);
+
+	if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
+		mmc_signal_sdio_irq(mmc);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_sdio_irq);
+
+irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+	struct tmio_mmc_host *host = devid;
+	unsigned int ireg, status;
+
+	pr_debug("MMC IRQ begin\n");
+
+	tmio_mmc_card_irq_status(host, &ireg, &status);
+	if (__tmio_mmc_card_detect_irq(host, ireg, status))
+		return IRQ_HANDLED;
+	if (__tmio_mmc_sdcard_irq(host, ireg, status))
+		return IRQ_HANDLED;
+
+	tmio_mmc_sdio_irq(irq, devid);
 
-out:
 	return IRQ_HANDLED;
 }
 EXPORT_SYMBOL(tmio_mmc_irq);
-- 
1.7.5.4

[PATCH 2/4] mmc: tmio: Provide separate interrupt handlers

[Simon Horman]

Provide separate interrupt handlers which may be used by platforms where
SDHI has three interrupt sources.

This patch also removes the commented-out handling of CRC and other errors.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

---

* SDCARD portion tested on AP4/Mackerel
* SDIO portion untested

v4
* As suggested by Guennadi Liakhovetski
  - Use bool as return type for __tmio_mmc_sdcard_irq() and
    __tmio_mmc_card_detect_irq()

v3
* Rebase for updated "mmc: tmio: Cache interrupt masks"
* As suggested by Guennadi Liakhovetski
  - Do not alter logic to handle more than one interupt at once
  - Add missing "static" to declartion of __tmio_mmc_sdcard_irq()

v2
* As suggested by Guennadi Liakhovetski
  - Combine 3 patches into one
  - Reduce the number of __tmio_..._irq() functions
  - Rename "...card_access..." functions as "...sdcard..."
---
 drivers/mmc/host/tmio_mmc.h     |    3 +
 drivers/mmc/host/tmio_mmc_pio.c |  131 ++++++++++++++++++++++++--------------
 2 files changed, 86 insertions(+), 48 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 1cf8db5..3020f98 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -97,6 +97,9 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host);
 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
 irqreturn_t tmio_mmc_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid);
 
 static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg,
 					 unsigned long *flags)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index f0c7830..6275e3d 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -545,44 +545,20 @@ out:
 	spin_unlock(&host->lock);
 }
 
-irqreturn_t tmio_mmc_irq(int irq, void *devid)
+static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host,
+				       int *ireg, int *status)
 {
-	struct tmio_mmc_host *host = devid;
-	struct mmc_host *mmc = host->mmc;
-	struct tmio_mmc_data *pdata = host->pdata;
-	unsigned int ireg, status;
-	unsigned int sdio_ireg, sdio_status;
-
-	pr_debug("MMC IRQ begin\n");
-
-	status = sd_ctrl_read32(host, CTL_STATUS);
-	ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
+	*status = sd_ctrl_read32(host, CTL_STATUS);
+	*ireg = *status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
 
-	sdio_ireg = 0;
-	if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
-		sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
-		sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL &
-				~host->sdio_irq_mask;
-
-		sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
-
-		if (sdio_ireg && !host->sdio_irq_enabled) {
-			pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
-				   sdio_status, host->sdio_irq_mask, sdio_ireg);
-			tmio_mmc_enable_sdio_irq(mmc, 0);
-			goto out;
-		}
-
-		if (mmc->caps & MMC_CAP_SDIO_IRQ &&
-			sdio_ireg & TMIO_SDIO_STAT_IOIRQ)
-			mmc_signal_sdio_irq(mmc);
-
-		if (sdio_ireg)
-			goto out;
-	}
+	pr_debug_status(*status);
+	pr_debug_status(*ireg);
+}
 
-	pr_debug_status(status);
-	pr_debug_status(ireg);
+static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
+				      int ireg, int status)
+{
+	struct mmc_host *mmc = host->mmc;
 
 	/* Card insert / remove attempts */
 	if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
@@ -592,43 +568,102 @@ irqreturn_t tmio_mmc_irq(int irq, void *devid)
 		     ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
 		    !work_pending(&mmc->detect.work))
 			mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-		goto out;
+		return true;
 	}
 
-	/* CRC and other errors */
-/*	if (ireg & TMIO_STAT_ERR_IRQ)
- *		handled |= tmio_error_irq(host, irq, stat);
- */
+	return false;
+}
+
+irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid)
+{
+	unsigned int ireg, status;
+	struct tmio_mmc_host *host = devid;
 
+	tmio_mmc_card_irq_status(host, &ireg, &status);
+	__tmio_mmc_card_detect_irq(host, ireg, status);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_card_detect_irq);
+
+static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host,
+				 int ireg, int status)
+{
 	/* Command completion */
 	if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
 		tmio_mmc_ack_mmc_irqs(host,
 			     TMIO_STAT_CMDRESPEND |
 			     TMIO_STAT_CMDTIMEOUT);
 		tmio_mmc_cmd_irq(host, status);
-		goto out;
+		return true;
 	}
 
 	/* Data transfer */
 	if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
 		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
 		tmio_mmc_pio_irq(host);
-		goto out;
+		return true;
 	}
 
 	/* Data transfer completion */
 	if (ireg & TMIO_STAT_DATAEND) {
 		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
 		tmio_mmc_data_irq(host);
-		goto out;
+		return true;
 	}
 
-	pr_warning("tmio_mmc: Spurious irq, disabling! "
-		"0x%08x 0x%08x 0x%08x\n", status, host->sdcard_irq_mask, ireg);
-	pr_debug_status(status);
-	tmio_mmc_disable_mmc_irqs(host, status & ~host->sdcard_irq_mask);
+	return false;
+}
+
+irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid)
+{
+	unsigned int ireg, status;
+	struct tmio_mmc_host *host = devid;
+
+	tmio_mmc_card_irq_status(host, &ireg, &status);
+	__tmio_mmc_sdcard_irq(host, ireg, status);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_sdcard_irq);
+
+irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid)
+{
+	struct tmio_mmc_host *host = devid;
+	struct mmc_host *mmc = host->mmc;
+	struct tmio_mmc_data *pdata = host->pdata;
+	unsigned int ireg, status;
+
+	if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
+		return IRQ_HANDLED;
+
+	status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
+	ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
+
+	sd_ctrl_write16(host, CTL_SDIO_STATUS, status & ~TMIO_SDIO_MASK_ALL);
+
+	if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
+		mmc_signal_sdio_irq(mmc);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_sdio_irq);
+
+irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+	struct tmio_mmc_host *host = devid;
+	unsigned int ireg, status;
+
+	pr_debug("MMC IRQ begin\n");
+
+	tmio_mmc_card_irq_status(host, &ireg, &status);
+	if (__tmio_mmc_card_detect_irq(host, ireg, status))
+		return IRQ_HANDLED;
+	if (__tmio_mmc_sdcard_irq(host, ireg, status))
+		return IRQ_HANDLED;
+
+	tmio_mmc_sdio_irq(irq, devid);
 
-out:
 	return IRQ_HANDLED;
 }
 EXPORT_SYMBOL(tmio_mmc_irq);
-- 
1.7.5.4

[PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Simon Horman]

Make use of per-source irq handles if the
platform (data) has multiple irq sources.

Also, as suggested by Guennadi Liakhovetski,
add and use defines the index or irqs in platform data.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

---

v4
* As suggested by Guennadi Liakhovetski:
  - Correct inverted values of SH_MOBILE_SDHI_IRQ_SDCARD and
    SH_MOBILE_SDHI_IRQ_CARD_DETECT

v3
* Update for changes to "mmc: tmio: Provide separate interrupt handlers"
* As suggested by Guennadi Liakhovetski:
  - Merge in patch "mmc: sdhi: Add defines for platform irq indexes"
  - Use an enum instead of defines for irq indexes

v2
* Update for changes to "mmc: tmio: Provide separate interrupt handlers"
* Make use of defines provided by
  "mmc: sdhi: Add defines for platform irq indexes"
* As suggested by Guennadi Liakhovetski:
  - Don't use a loop to initialise irq handlers, the unrolled version
    is easier on the eyes (and exactly the same number of lines of code!)
---
 drivers/mmc/host/sh_mobile_sdhi.c  |   60 ++++++++++++++++++++++-------------
 include/linux/mmc/sh_mobile_sdhi.h |    7 ++++
 2 files changed, 45 insertions(+), 22 deletions(-)

diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 774f643..619df30 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -96,7 +96,9 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
 	struct tmio_mmc_host *host;
 	char clk_name[8];
-	int i, irq, ret;
+	int irq, ret;
+	irqreturn_t (*f)(int irq, void *devid);
+	bool multi_irq = false;
 
 	priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
 	if (priv = NULL) {
@@ -153,27 +155,33 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto eprobe;
 
-	for (i = 0; i < 3; i++) {
-		irq = platform_get_irq(pdev, i);
-		if (irq < 0) {
-			if (i) {
-				continue;
-			} else {
-				ret = irq;
-				goto eirq;
-			}
-		}
-		ret = request_irq(irq, tmio_mmc_irq, 0,
+	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
+	if (irq >= 0) {
+		multi_irq = true;
+		ret = request_irq(irq, tmio_mmc_sdio_irq, 0,
 				  dev_name(&pdev->dev), host);
-		if (ret) {
-			while (i--) {
-				irq = platform_get_irq(pdev, i);
-				if (irq >= 0)
-					free_irq(irq, host);
-			}
-			goto eirq;
-		}
+		if (ret)
+			goto eirq_sdio;
 	}
+
+	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
+	if (irq >= 0) {
+		multi_irq = true;
+		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
+				  dev_name(&pdev->dev), host);
+		if (ret)
+			goto eirq_sdcard;
+	} else if (multi_irq)
+		goto eirq_sdcard;
+
+	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
+	if (irq < 0)
+		goto eirq_card_detect;
+	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
+	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
+	if (ret)
+		goto eirq_card_detect;
+
 	dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
 		 mmc_hostname(host->mmc), (unsigned long)
 		 (platform_get_resource(pdev,IORESOURCE_MEM, 0)->start),
@@ -181,7 +189,15 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 
 	return ret;
 
-eirq:
+eirq_card_detect:
+	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
+	if (irq >= 0)
+		free_irq(irq, host);
+eirq_sdcard:
+	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
+	if (irq >= 0)
+		free_irq(irq, host);
+eirq_sdio:
 	tmio_mmc_host_remove(host);
 eprobe:
 	clk_disable(priv->clk);
@@ -203,7 +219,7 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 
 	tmio_mmc_host_remove(host);
 
-	for (i = 0; i < 3; i++) {
+	for (i = 0; i < SH_MOBILE_SDHI_IRQ_MAX; i++) {
 		irq = platform_get_irq(pdev, i);
 		if (irq >= 0)
 			free_irq(irq, host);
diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h
index bd50b36..80d3629 100644
--- a/include/linux/mmc/sh_mobile_sdhi.h
+++ b/include/linux/mmc/sh_mobile_sdhi.h
@@ -3,6 +3,13 @@
 
 #include <linux/types.h>
 
+enum {
+	SH_MOBILE_SDHI_IRQ_CARD_DETECT = 0,
+	SH_MOBILE_SDHI_IRQ_SDCARD,
+	SH_MOBILE_SDHI_IRQ_SDIO,
+	SH_MOBILE_SDHI_IRQ_MAX
+};
+
 struct platform_device;
 struct tmio_mmc_data;
 
-- 
1.7.5.4

[PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Simon Horman]

Make use of per-source irq handles if the
platform (data) has multiple irq sources.

Also, as suggested by Guennadi Liakhovetski,
add and use defines the index or irqs in platform data.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

---

v4
* As suggested by Guennadi Liakhovetski:
  - Correct inverted values of SH_MOBILE_SDHI_IRQ_SDCARD and
    SH_MOBILE_SDHI_IRQ_CARD_DETECT

v3
* Update for changes to "mmc: tmio: Provide separate interrupt handlers"
* As suggested by Guennadi Liakhovetski:
  - Merge in patch "mmc: sdhi: Add defines for platform irq indexes"
  - Use an enum instead of defines for irq indexes

v2
* Update for changes to "mmc: tmio: Provide separate interrupt handlers"
* Make use of defines provided by
  "mmc: sdhi: Add defines for platform irq indexes"
* As suggested by Guennadi Liakhovetski:
  - Don't use a loop to initialise irq handlers, the unrolled version
    is easier on the eyes (and exactly the same number of lines of code!)
---
 drivers/mmc/host/sh_mobile_sdhi.c  |   60 ++++++++++++++++++++++-------------
 include/linux/mmc/sh_mobile_sdhi.h |    7 ++++
 2 files changed, 45 insertions(+), 22 deletions(-)

diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 774f643..619df30 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -96,7 +96,9 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
 	struct tmio_mmc_host *host;
 	char clk_name[8];
-	int i, irq, ret;
+	int irq, ret;
+	irqreturn_t (*f)(int irq, void *devid);
+	bool multi_irq = false;
 
 	priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
 	if (priv == NULL) {
@@ -153,27 +155,33 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto eprobe;
 
-	for (i = 0; i < 3; i++) {
-		irq = platform_get_irq(pdev, i);
-		if (irq < 0) {
-			if (i) {
-				continue;
-			} else {
-				ret = irq;
-				goto eirq;
-			}
-		}
-		ret = request_irq(irq, tmio_mmc_irq, 0,
+	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
+	if (irq >= 0) {
+		multi_irq = true;
+		ret = request_irq(irq, tmio_mmc_sdio_irq, 0,
 				  dev_name(&pdev->dev), host);
-		if (ret) {
-			while (i--) {
-				irq = platform_get_irq(pdev, i);
-				if (irq >= 0)
-					free_irq(irq, host);
-			}
-			goto eirq;
-		}
+		if (ret)
+			goto eirq_sdio;
 	}
+
+	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
+	if (irq >= 0) {
+		multi_irq = true;
+		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
+				  dev_name(&pdev->dev), host);
+		if (ret)
+			goto eirq_sdcard;
+	} else if (multi_irq)
+		goto eirq_sdcard;
+
+	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
+	if (irq < 0)
+		goto eirq_card_detect;
+	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
+	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
+	if (ret)
+		goto eirq_card_detect;
+
 	dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
 		 mmc_hostname(host->mmc), (unsigned long)
 		 (platform_get_resource(pdev,IORESOURCE_MEM, 0)->start),
@@ -181,7 +189,15 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 
 	return ret;
 
-eirq:
+eirq_card_detect:
+	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
+	if (irq >= 0)
+		free_irq(irq, host);
+eirq_sdcard:
+	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
+	if (irq >= 0)
+		free_irq(irq, host);
+eirq_sdio:
 	tmio_mmc_host_remove(host);
 eprobe:
 	clk_disable(priv->clk);
@@ -203,7 +219,7 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 
 	tmio_mmc_host_remove(host);
 
-	for (i = 0; i < 3; i++) {
+	for (i = 0; i < SH_MOBILE_SDHI_IRQ_MAX; i++) {
 		irq = platform_get_irq(pdev, i);
 		if (irq >= 0)
 			free_irq(irq, host);
diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h
index bd50b36..80d3629 100644
--- a/include/linux/mmc/sh_mobile_sdhi.h
+++ b/include/linux/mmc/sh_mobile_sdhi.h
@@ -3,6 +3,13 @@
 
 #include <linux/types.h>
 
+enum {
+	SH_MOBILE_SDHI_IRQ_CARD_DETECT = 0,
+	SH_MOBILE_SDHI_IRQ_SDCARD,
+	SH_MOBILE_SDHI_IRQ_SDIO,
+	SH_MOBILE_SDHI_IRQ_MAX
+};
+
 struct platform_device;
 struct tmio_mmc_data;
 
-- 
1.7.5.4

[PATCH 4/4] ARM: shmobile: ag5evm, ap4: Make use of irq index enum

[Simon Horman]

This is intended to make it easier to correctly order IRQs.

As suggested by Guennadi Liakhovetski.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Simon Horman <horms@verge.net.au>

---

Depends on "mmc: sdhi: Make use of per-source irq handlers"

v4
* Update for corrected ordering of SH_MOBILE_SDHI_IRQ_SDCARD and
  SH_MOBILE_SDHI_IRQ_CARD_DETECT

v2
* Initial release
---
 arch/arm/mach-shmobile/board-ag5evm.c   |   12 ++++++------
 arch/arm/mach-shmobile/board-mackerel.c |   18 +++++++++---------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index ce5c251..0d543bb 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -352,15 +352,15 @@ static struct resource sdhi0_resources[] = {
 		.end	= 0xee1000ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= gic_spi(83),
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= gic_spi(84),
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= gic_spi(85),
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -395,15 +395,15 @@ static struct resource sdhi1_resources[] = {
 		.end	= 0xee1200ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= gic_spi(87),
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= gic_spi(88),
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= gic_spi(89),
 		.flags	= IORESOURCE_IRQ,
 	},
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index d41c01f..f9d3a93 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1022,15 +1022,15 @@ static struct resource sdhi0_resources[] = {
 		.end	= 0xe68500ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -1065,15 +1065,15 @@ static struct resource sdhi1_resources[] = {
 		.end	= 0xe68600ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -1116,15 +1116,15 @@ static struct resource sdhi2_resources[] = {
 		.end	= 0xe68700ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= evt2irq(0x1200), /* SDHI2_SDHI2I0 */
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= evt2irq(0x1220), /* SDHI2_SDHI2I1 */
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= evt2irq(0x1240), /* SDHI2_SDHI2I2 */
 		.flags	= IORESOURCE_IRQ,
 	},
-- 
1.7.5.4

[PATCH 4/4] ARM: shmobile: ag5evm, ap4: Make use of irq index enum

[Simon Horman]

This is intended to make it easier to correctly order IRQs.

As suggested by Guennadi Liakhovetski.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Simon Horman <horms@verge.net.au>

---

Depends on "mmc: sdhi: Make use of per-source irq handlers"

v4
* Update for corrected ordering of SH_MOBILE_SDHI_IRQ_SDCARD and
  SH_MOBILE_SDHI_IRQ_CARD_DETECT

v2
* Initial release
---
 arch/arm/mach-shmobile/board-ag5evm.c   |   12 ++++++------
 arch/arm/mach-shmobile/board-mackerel.c |   18 +++++++++---------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index ce5c251..0d543bb 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -352,15 +352,15 @@ static struct resource sdhi0_resources[] = {
 		.end	= 0xee1000ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= gic_spi(83),
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= gic_spi(84),
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= gic_spi(85),
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -395,15 +395,15 @@ static struct resource sdhi1_resources[] = {
 		.end	= 0xee1200ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= gic_spi(87),
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= gic_spi(88),
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= gic_spi(89),
 		.flags	= IORESOURCE_IRQ,
 	},
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index d41c01f..f9d3a93 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1022,15 +1022,15 @@ static struct resource sdhi0_resources[] = {
 		.end	= 0xe68500ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -1065,15 +1065,15 @@ static struct resource sdhi1_resources[] = {
 		.end	= 0xe68600ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -1116,15 +1116,15 @@ static struct resource sdhi2_resources[] = {
 		.end	= 0xe68700ff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
+	[1 + SH_MOBILE_SDHI_IRQ_CARD_DETECT] = {
 		.start	= evt2irq(0x1200), /* SDHI2_SDHI2I0 */
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
 		.start	= evt2irq(0x1220), /* SDHI2_SDHI2I1 */
 		.flags	= IORESOURCE_IRQ,
 	},
-	[3] = {
+	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
 		.start	= evt2irq(0x1240), /* SDHI2_SDHI2I2 */
 		.flags	= IORESOURCE_IRQ,
 	},
-- 
1.7.5.4

Re: [PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Guennadi Liakhovetski]

On Wed, 17 Aug 2011, Simon Horman wrote:

> Make use of per-source irq handles if the
> platform (data) has multiple irq sources.
> 
> Also, as suggested by Guennadi Liakhovetski,
> add and use defines the index or irqs in platform data.
> 
> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Signed-off-by: Simon Horman <horms@verge.net.au>
> 
> ---
> 
> v4
> * As suggested by Guennadi Liakhovetski:
>   - Correct inverted values of SH_MOBILE_SDHI_IRQ_SDCARD and
>     SH_MOBILE_SDHI_IRQ_CARD_DETECT
> 
> v3
> * Update for changes to "mmc: tmio: Provide separate interrupt handlers"
> * As suggested by Guennadi Liakhovetski:
>   - Merge in patch "mmc: sdhi: Add defines for platform irq indexes"
>   - Use an enum instead of defines for irq indexes
> 
> v2
> * Update for changes to "mmc: tmio: Provide separate interrupt handlers"
> * Make use of defines provided by
>   "mmc: sdhi: Add defines for platform irq indexes"
> * As suggested by Guennadi Liakhovetski:
>   - Don't use a loop to initialise irq handlers, the unrolled version
>     is easier on the eyes (and exactly the same number of lines of code!)
> ---
>  drivers/mmc/host/sh_mobile_sdhi.c  |   60 ++++++++++++++++++++++-------------
>  include/linux/mmc/sh_mobile_sdhi.h |    7 ++++
>  2 files changed, 45 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
> index 774f643..619df30 100644
> --- a/drivers/mmc/host/sh_mobile_sdhi.c
> +++ b/drivers/mmc/host/sh_mobile_sdhi.c
> @@ -96,7 +96,9 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
>  	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
>  	struct tmio_mmc_host *host;
>  	char clk_name[8];
> -	int i, irq, ret;
> +	int irq, ret;
> +	irqreturn_t (*f)(int irq, void *devid);
> +	bool multi_irq = false;
>  
>  	priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
>  	if (priv = NULL) {
> @@ -153,27 +155,33 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
>  	if (ret < 0)
>  		goto eprobe;
>  
> -	for (i = 0; i < 3; i++) {
> -		irq = platform_get_irq(pdev, i);
> -		if (irq < 0) {
> -			if (i) {
> -				continue;
> -			} else {
> -				ret = irq;
> -				goto eirq;
> -			}
> -		}
> -		ret = request_irq(irq, tmio_mmc_irq, 0,
> +	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
> +	if (irq >= 0) {
> +		multi_irq = true;
> +		ret = request_irq(irq, tmio_mmc_sdio_irq, 0,
>  				  dev_name(&pdev->dev), host);
> -		if (ret) {
> -			while (i--) {
> -				irq = platform_get_irq(pdev, i);
> -				if (irq >= 0)
> -					free_irq(irq, host);
> -			}
> -			goto eirq;
> -		}
> +		if (ret)
> +			goto eirq_sdio;
>  	}
> +
> +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> +	if (irq >= 0) {
> +		multi_irq = true;
> +		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
> +				  dev_name(&pdev->dev), host);
> +		if (ret)
> +			goto eirq_sdcard;
> +	} else if (multi_irq)
> +		goto eirq_sdcard;
> +
> +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
> +	if (irq < 0)
> +		goto eirq_card_detect;
> +	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
> +	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
> +	if (ret)
> +		goto eirq_card_detect;
> +

I still don't see why a multi-IRQ configuration without a card-detect IRQ 
like

static struct resource sdhi_resources[] = {
	[0] = {
		.name	= "SDHI2",
		...,
	},
	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
		.start	= ...,
		.flags	= IORESOURCE_IRQ,
	},
	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
		.start	= ...,
		.flags	= IORESOURCE_IRQ,
	},
};

should be invalid. Especially since we actually want to avoid using the 
controller card-detect IRQ for power efficiency and use a GPIO instead.

Thanks
Guennadi

>  	dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
>  		 mmc_hostname(host->mmc), (unsigned long)
>  		 (platform_get_resource(pdev,IORESOURCE_MEM, 0)->start),
> @@ -181,7 +189,15 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
>  
>  	return ret;
>  
> -eirq:
> +eirq_card_detect:
> +	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> +	if (irq >= 0)
> +		free_irq(irq, host);
> +eirq_sdcard:
> +	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
> +	if (irq >= 0)
> +		free_irq(irq, host);
> +eirq_sdio:
>  	tmio_mmc_host_remove(host);
>  eprobe:
>  	clk_disable(priv->clk);
> @@ -203,7 +219,7 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
>  
>  	tmio_mmc_host_remove(host);
>  
> -	for (i = 0; i < 3; i++) {
> +	for (i = 0; i < SH_MOBILE_SDHI_IRQ_MAX; i++) {
>  		irq = platform_get_irq(pdev, i);
>  		if (irq >= 0)
>  			free_irq(irq, host);
> diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h
> index bd50b36..80d3629 100644
> --- a/include/linux/mmc/sh_mobile_sdhi.h
> +++ b/include/linux/mmc/sh_mobile_sdhi.h
> @@ -3,6 +3,13 @@
>  
>  #include <linux/types.h>
>  
> +enum {
> +	SH_MOBILE_SDHI_IRQ_CARD_DETECT = 0,
> +	SH_MOBILE_SDHI_IRQ_SDCARD,
> +	SH_MOBILE_SDHI_IRQ_SDIO,
> +	SH_MOBILE_SDHI_IRQ_MAX
> +};
> +
>  struct platform_device;
>  struct tmio_mmc_data;
>  
> -- 
> 1.7.5.4
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

Re: [PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Guennadi Liakhovetski]

On Wed, 17 Aug 2011, Simon Horman wrote:

> Make use of per-source irq handles if the
> platform (data) has multiple irq sources.
> 
> Also, as suggested by Guennadi Liakhovetski,
> add and use defines the index or irqs in platform data.
> 
> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Signed-off-by: Simon Horman <horms@verge.net.au>
> 
> ---
> 
> v4
> * As suggested by Guennadi Liakhovetski:
>   - Correct inverted values of SH_MOBILE_SDHI_IRQ_SDCARD and
>     SH_MOBILE_SDHI_IRQ_CARD_DETECT
> 
> v3
> * Update for changes to "mmc: tmio: Provide separate interrupt handlers"
> * As suggested by Guennadi Liakhovetski:
>   - Merge in patch "mmc: sdhi: Add defines for platform irq indexes"
>   - Use an enum instead of defines for irq indexes
> 
> v2
> * Update for changes to "mmc: tmio: Provide separate interrupt handlers"
> * Make use of defines provided by
>   "mmc: sdhi: Add defines for platform irq indexes"
> * As suggested by Guennadi Liakhovetski:
>   - Don't use a loop to initialise irq handlers, the unrolled version
>     is easier on the eyes (and exactly the same number of lines of code!)
> ---
>  drivers/mmc/host/sh_mobile_sdhi.c  |   60 ++++++++++++++++++++++-------------
>  include/linux/mmc/sh_mobile_sdhi.h |    7 ++++
>  2 files changed, 45 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
> index 774f643..619df30 100644
> --- a/drivers/mmc/host/sh_mobile_sdhi.c
> +++ b/drivers/mmc/host/sh_mobile_sdhi.c
> @@ -96,7 +96,9 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
>  	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
>  	struct tmio_mmc_host *host;
>  	char clk_name[8];
> -	int i, irq, ret;
> +	int irq, ret;
> +	irqreturn_t (*f)(int irq, void *devid);
> +	bool multi_irq = false;
>  
>  	priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
>  	if (priv == NULL) {
> @@ -153,27 +155,33 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
>  	if (ret < 0)
>  		goto eprobe;
>  
> -	for (i = 0; i < 3; i++) {
> -		irq = platform_get_irq(pdev, i);
> -		if (irq < 0) {
> -			if (i) {
> -				continue;
> -			} else {
> -				ret = irq;
> -				goto eirq;
> -			}
> -		}
> -		ret = request_irq(irq, tmio_mmc_irq, 0,
> +	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
> +	if (irq >= 0) {
> +		multi_irq = true;
> +		ret = request_irq(irq, tmio_mmc_sdio_irq, 0,
>  				  dev_name(&pdev->dev), host);
> -		if (ret) {
> -			while (i--) {
> -				irq = platform_get_irq(pdev, i);
> -				if (irq >= 0)
> -					free_irq(irq, host);
> -			}
> -			goto eirq;
> -		}
> +		if (ret)
> +			goto eirq_sdio;
>  	}
> +
> +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> +	if (irq >= 0) {
> +		multi_irq = true;
> +		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
> +				  dev_name(&pdev->dev), host);
> +		if (ret)
> +			goto eirq_sdcard;
> +	} else if (multi_irq)
> +		goto eirq_sdcard;
> +
> +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
> +	if (irq < 0)
> +		goto eirq_card_detect;
> +	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
> +	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
> +	if (ret)
> +		goto eirq_card_detect;
> +

I still don't see why a multi-IRQ configuration without a card-detect IRQ 
like

static struct resource sdhi_resources[] = {
	[0] = {
		.name	= "SDHI2",
		...,
	},
	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
		.start	= ...,
		.flags	= IORESOURCE_IRQ,
	},
	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
		.start	= ...,
		.flags	= IORESOURCE_IRQ,
	},
};

should be invalid. Especially since we actually want to avoid using the 
controller card-detect IRQ for power efficiency and use a GPIO instead.

Thanks
Guennadi

>  	dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
>  		 mmc_hostname(host->mmc), (unsigned long)
>  		 (platform_get_resource(pdev,IORESOURCE_MEM, 0)->start),
> @@ -181,7 +189,15 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
>  
>  	return ret;
>  
> -eirq:
> +eirq_card_detect:
> +	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> +	if (irq >= 0)
> +		free_irq(irq, host);
> +eirq_sdcard:
> +	irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
> +	if (irq >= 0)
> +		free_irq(irq, host);
> +eirq_sdio:
>  	tmio_mmc_host_remove(host);
>  eprobe:
>  	clk_disable(priv->clk);
> @@ -203,7 +219,7 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
>  
>  	tmio_mmc_host_remove(host);
>  
> -	for (i = 0; i < 3; i++) {
> +	for (i = 0; i < SH_MOBILE_SDHI_IRQ_MAX; i++) {
>  		irq = platform_get_irq(pdev, i);
>  		if (irq >= 0)
>  			free_irq(irq, host);
> diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h
> index bd50b36..80d3629 100644
> --- a/include/linux/mmc/sh_mobile_sdhi.h
> +++ b/include/linux/mmc/sh_mobile_sdhi.h
> @@ -3,6 +3,13 @@
>  
>  #include <linux/types.h>
>  
> +enum {
> +	SH_MOBILE_SDHI_IRQ_CARD_DETECT = 0,
> +	SH_MOBILE_SDHI_IRQ_SDCARD,
> +	SH_MOBILE_SDHI_IRQ_SDIO,
> +	SH_MOBILE_SDHI_IRQ_MAX
> +};
> +
>  struct platform_device;
>  struct tmio_mmc_data;
>  
> -- 
> 1.7.5.4
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

Re: [PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Simon Horman]

On Wed, Aug 17, 2011 at 10:20:24AM +0200, Guennadi Liakhovetski wrote:
> On Wed, 17 Aug 2011, Simon Horman wrote:

[snip ]

> > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> > +	if (irq >= 0) {
> > +		multi_irq = true;
> > +		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
> > +				  dev_name(&pdev->dev), host);
> > +		if (ret)
> > +			goto eirq_sdcard;
> > +	} else if (multi_irq)
> > +		goto eirq_sdcard;
> > +
> > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
> > +	if (irq < 0)
> > +		goto eirq_card_detect;
> > +	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
> > +	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
> > +	if (ret)
> > +		goto eirq_card_detect;
> > +
> 
> I still don't see why a multi-IRQ configuration without a card-detect IRQ 
> like
> 
> static struct resource sdhi_resources[] = {
> 	[0] = {
> 		.name	= "SDHI2",
> 		...,
> 	},
> 	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
> 		.start	= ...,
> 		.flags	= IORESOURCE_IRQ,
> 	},
> 	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
> 		.start	= ...,
> 		.flags	= IORESOURCE_IRQ,
> 	},
> };
> 
> should be invalid. Especially since we actually want to avoid using the 
> controller card-detect IRQ for power efficiency and use a GPIO instead.

Ok, in this case you would like SH_MOBILE_SDHI_IRQ_SDCARD to use
tmio_mmc_sdcard_irq() ?

Re: [PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Simon Horman]

On Wed, Aug 17, 2011 at 10:20:24AM +0200, Guennadi Liakhovetski wrote:
> On Wed, 17 Aug 2011, Simon Horman wrote:

[snip ]

> > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> > +	if (irq >= 0) {
> > +		multi_irq = true;
> > +		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
> > +				  dev_name(&pdev->dev), host);
> > +		if (ret)
> > +			goto eirq_sdcard;
> > +	} else if (multi_irq)
> > +		goto eirq_sdcard;
> > +
> > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
> > +	if (irq < 0)
> > +		goto eirq_card_detect;
> > +	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
> > +	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
> > +	if (ret)
> > +		goto eirq_card_detect;
> > +
> 
> I still don't see why a multi-IRQ configuration without a card-detect IRQ 
> like
> 
> static struct resource sdhi_resources[] = {
> 	[0] = {
> 		.name	= "SDHI2",
> 		...,
> 	},
> 	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
> 		.start	= ...,
> 		.flags	= IORESOURCE_IRQ,
> 	},
> 	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
> 		.start	= ...,
> 		.flags	= IORESOURCE_IRQ,
> 	},
> };
> 
> should be invalid. Especially since we actually want to avoid using the 
> controller card-detect IRQ for power efficiency and use a GPIO instead.

Ok, in this case you would like SH_MOBILE_SDHI_IRQ_SDCARD to use
tmio_mmc_sdcard_irq() ?

Re: [PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Guennadi Liakhovetski]

On Wed, 17 Aug 2011, Simon Horman wrote:

> On Wed, Aug 17, 2011 at 10:20:24AM +0200, Guennadi Liakhovetski wrote:
> > On Wed, 17 Aug 2011, Simon Horman wrote:
> 
> [snip ]
> 
> > > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> > > +	if (irq >= 0) {
> > > +		multi_irq = true;
> > > +		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
> > > +				  dev_name(&pdev->dev), host);
> > > +		if (ret)
> > > +			goto eirq_sdcard;
> > > +	} else if (multi_irq)
> > > +		goto eirq_sdcard;
> > > +
> > > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
> > > +	if (irq < 0)
> > > +		goto eirq_card_detect;
> > > +	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
> > > +	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
> > > +	if (ret)
> > > +		goto eirq_card_detect;
> > > +
> > 
> > I still don't see why a multi-IRQ configuration without a card-detect IRQ 
> > like
> > 
> > static struct resource sdhi_resources[] = {
> > 	[0] = {
> > 		.name	= "SDHI2",
> > 		...,
> > 	},
> > 	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
> > 		.start	= ...,
> > 		.flags	= IORESOURCE_IRQ,
> > 	},
> > 	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
> > 		.start	= ...,
> > 		.flags	= IORESOURCE_IRQ,
> > 	},
> > };
> > 
> > should be invalid. Especially since we actually want to avoid using the 
> > controller card-detect IRQ for power efficiency and use a GPIO instead.
> 
> Ok, in this case you would like SH_MOBILE_SDHI_IRQ_SDCARD to use
> tmio_mmc_sdcard_irq() ?

This is a good question. I think your erroring out is wrong, but I'm not 
sure what is best here. Using sdcard and sdio ISR in this case seems most 
logical to me. But I don't know if we ever can get hardware, where we 
indeed only have two SDHI interrupts - one for SDIO and one for SDCARD and 
CARD_DETECT. I'm not aware of such hardware so far, so, yes, I'd go with 
SDIO and SDCARD ISRs for now. In any case, this is SDHI internal decision, 
so, we can change it at any time, if we need to.

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

Re: [PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Guennadi Liakhovetski]

On Wed, 17 Aug 2011, Simon Horman wrote:

> On Wed, Aug 17, 2011 at 10:20:24AM +0200, Guennadi Liakhovetski wrote:
> > On Wed, 17 Aug 2011, Simon Horman wrote:
> 
> [snip ]
> 
> > > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> > > +	if (irq >= 0) {
> > > +		multi_irq = true;
> > > +		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
> > > +				  dev_name(&pdev->dev), host);
> > > +		if (ret)
> > > +			goto eirq_sdcard;
> > > +	} else if (multi_irq)
> > > +		goto eirq_sdcard;
> > > +
> > > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
> > > +	if (irq < 0)
> > > +		goto eirq_card_detect;
> > > +	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
> > > +	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
> > > +	if (ret)
> > > +		goto eirq_card_detect;
> > > +
> > 
> > I still don't see why a multi-IRQ configuration without a card-detect IRQ 
> > like
> > 
> > static struct resource sdhi_resources[] = {
> > 	[0] = {
> > 		.name	= "SDHI2",
> > 		...,
> > 	},
> > 	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
> > 		.start	= ...,
> > 		.flags	= IORESOURCE_IRQ,
> > 	},
> > 	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
> > 		.start	= ...,
> > 		.flags	= IORESOURCE_IRQ,
> > 	},
> > };
> > 
> > should be invalid. Especially since we actually want to avoid using the 
> > controller card-detect IRQ for power efficiency and use a GPIO instead.
> 
> Ok, in this case you would like SH_MOBILE_SDHI_IRQ_SDCARD to use
> tmio_mmc_sdcard_irq() ?

This is a good question. I think your erroring out is wrong, but I'm not 
sure what is best here. Using sdcard and sdio ISR in this case seems most 
logical to me. But I don't know if we ever can get hardware, where we 
indeed only have two SDHI interrupts - one for SDIO and one for SDCARD and 
CARD_DETECT. I'm not aware of such hardware so far, so, yes, I'd go with 
SDIO and SDCARD ISRs for now. In any case, this is SDHI internal decision, 
so, we can change it at any time, if we need to.

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

Re: [PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Simon Horman]

On Wed, Aug 17, 2011 at 12:06:56PM +0200, Guennadi Liakhovetski wrote:
> On Wed, 17 Aug 2011, Simon Horman wrote:
> 
> > On Wed, Aug 17, 2011 at 10:20:24AM +0200, Guennadi Liakhovetski wrote:
> > > On Wed, 17 Aug 2011, Simon Horman wrote:
> > 
> > [snip ]
> > 
> > > > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> > > > +	if (irq >= 0) {
> > > > +		multi_irq = true;
> > > > +		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
> > > > +				  dev_name(&pdev->dev), host);
> > > > +		if (ret)
> > > > +			goto eirq_sdcard;
> > > > +	} else if (multi_irq)
> > > > +		goto eirq_sdcard;
> > > > +
> > > > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
> > > > +	if (irq < 0)
> > > > +		goto eirq_card_detect;
> > > > +	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
> > > > +	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
> > > > +	if (ret)
> > > > +		goto eirq_card_detect;
> > > > +
> > > 
> > > I still don't see why a multi-IRQ configuration without a card-detect IRQ 
> > > like
> > > 
> > > static struct resource sdhi_resources[] = {
> > > 	[0] = {
> > > 		.name	= "SDHI2",
> > > 		...,
> > > 	},
> > > 	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
> > > 		.start	= ...,
> > > 		.flags	= IORESOURCE_IRQ,
> > > 	},
> > > 	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
> > > 		.start	= ...,
> > > 		.flags	= IORESOURCE_IRQ,
> > > 	},
> > > };
> > > 
> > > should be invalid. Especially since we actually want to avoid using the 
> > > controller card-detect IRQ for power efficiency and use a GPIO instead.
> > 
> > Ok, in this case you would like SH_MOBILE_SDHI_IRQ_SDCARD to use
> > tmio_mmc_sdcard_irq() ?
> 
> This is a good question. I think your erroring out is wrong, but I'm not 
> sure what is best here. Using sdcard and sdio ISR in this case seems most 
> logical to me. But I don't know if we ever can get hardware, where we 
> indeed only have two SDHI interrupts - one for SDIO and one for SDCARD and 
> CARD_DETECT. I'm not aware of such hardware so far, so, yes, I'd go with 
> SDIO and SDCARD ISRs for now. In any case, this is SDHI internal decision, 
> so, we can change it at any time, if we need to.

Agreed.

Re: [PATCH 3/4] mmc: sdhi: Make use of per-source irq handlers

[Simon Horman]

On Wed, Aug 17, 2011 at 12:06:56PM +0200, Guennadi Liakhovetski wrote:
> On Wed, 17 Aug 2011, Simon Horman wrote:
> 
> > On Wed, Aug 17, 2011 at 10:20:24AM +0200, Guennadi Liakhovetski wrote:
> > > On Wed, 17 Aug 2011, Simon Horman wrote:
> > 
> > [snip ]
> > 
> > > > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
> > > > +	if (irq >= 0) {
> > > > +		multi_irq = true;
> > > > +		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
> > > > +				  dev_name(&pdev->dev), host);
> > > > +		if (ret)
> > > > +			goto eirq_sdcard;
> > > > +	} else if (multi_irq)
> > > > +		goto eirq_sdcard;
> > > > +
> > > > +	ret = irq = platform_get_irq(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
> > > > +	if (irq < 0)
> > > > +		goto eirq_card_detect;
> > > > +	f = multi_irq ? tmio_mmc_card_detect_irq : tmio_mmc_irq;
> > > > +	ret = request_irq(irq, f, 0, dev_name(&pdev->dev), host);
> > > > +	if (ret)
> > > > +		goto eirq_card_detect;
> > > > +
> > > 
> > > I still don't see why a multi-IRQ configuration without a card-detect IRQ 
> > > like
> > > 
> > > static struct resource sdhi_resources[] = {
> > > 	[0] = {
> > > 		.name	= "SDHI2",
> > > 		...,
> > > 	},
> > > 	[1 + SH_MOBILE_SDHI_IRQ_SDCARD] = {
> > > 		.start	= ...,
> > > 		.flags	= IORESOURCE_IRQ,
> > > 	},
> > > 	[1 + SH_MOBILE_SDHI_IRQ_SDIO] = {
> > > 		.start	= ...,
> > > 		.flags	= IORESOURCE_IRQ,
> > > 	},
> > > };
> > > 
> > > should be invalid. Especially since we actually want to avoid using the 
> > > controller card-detect IRQ for power efficiency and use a GPIO instead.
> > 
> > Ok, in this case you would like SH_MOBILE_SDHI_IRQ_SDCARD to use
> > tmio_mmc_sdcard_irq() ?
> 
> This is a good question. I think your erroring out is wrong, but I'm not 
> sure what is best here. Using sdcard and sdio ISR in this case seems most 
> logical to me. But I don't know if we ever can get hardware, where we 
> indeed only have two SDHI interrupts - one for SDIO and one for SDCARD and 
> CARD_DETECT. I'm not aware of such hardware so far, so, yes, I'd go with 
> SDIO and SDCARD ISRs for now. In any case, this is SDHI internal decision, 
> so, we can change it at any time, if we need to.

Agreed.