[GIT PULL] dmaengine: at_hdmac fixes for next

[GIT PULL] dmaengine: at_hdmac fixes for next

[Nicolas Ferre]

Vinod,

Please pull from:

  git://github.com/at91linux/linux-2.6-at91.git nfe/sdma_at_hdmac

to receive latest updates for the Atmel at_hdmac dmaengine driver. Those changes are made on top of current linus' git tree (v3.1-rc2-59-g5bad33c).
The patches below have been discussed on the linux-arm-kernel mailing-list.

Thanks,

Nicolas Ferre (4):
      dmaengine: at_hdmac: replace spin_lock* with irqsave variants
      dmaengine: at_hdmac: improve power management routines
      dmaengine: at_hdmac: add wrappers for testing channel state
      dmaengine: at_hdmac: fix way to specify cyclic capability

 drivers/dma/at_hdmac.c      |  159 +++++++++++++++++++++++++++++++++---------
 drivers/dma/at_hdmac_regs.h |   24 +++++++
 2 files changed, 149 insertions(+), 34 deletions(-)

-- 
Nicolas Ferre

[GIT PULL] dmaengine: at_hdmac fixes for next

[Nicolas Ferre]

Vinod,

Please pull from:

  git://github.com/at91linux/linux-2.6-at91.git nfe/sdma_at_hdmac

to receive latest updates for the Atmel at_hdmac dmaengine driver. Those changes are made on top of current linus' git tree (v3.1-rc2-59-g5bad33c).
The patches below have been discussed on the linux-arm-kernel mailing-list.

Thanks,

Nicolas Ferre (4):
      dmaengine: at_hdmac: replace spin_lock* with irqsave variants
      dmaengine: at_hdmac: improve power management routines
      dmaengine: at_hdmac: add wrappers for testing channel state
      dmaengine: at_hdmac: fix way to specify cyclic capability

 drivers/dma/at_hdmac.c      |  159 +++++++++++++++++++++++++++++++++---------
 drivers/dma/at_hdmac_regs.h |   24 +++++++
 2 files changed, 149 insertions(+), 34 deletions(-)

-- 
Nicolas Ferre

Re: [GIT PULL] dmaengine: at_hdmac fixes for next

[Koul, Vinod]

On Tue, 2011-08-16 at 15:56 +0200, Nicolas Ferre wrote:
> Vinod,
> 
> Please pull from:
> 
>   git://github.com/at91linux/linux-2.6-at91.git nfe/sdma_at_hdmac
> 
> to receive latest updates for the Atmel at_hdmac dmaengine driver. Those changes are made on top of current linus' git tree (v3.1-rc2-59-g5bad33c).
> The patches below have been discussed on the linux-arm-kernel mailing-list.
> 
> Thanks,
> 
> Nicolas Ferre (4):
>       dmaengine: at_hdmac: replace spin_lock* with irqsave variants
>       dmaengine: at_hdmac: improve power management routines
>       dmaengine: at_hdmac: add wrappers for testing channel state
>       dmaengine: at_hdmac: fix way to specify cyclic capability
> 
>  drivers/dma/at_hdmac.c      |  159 +++++++++++++++++++++++++++++++++---------
>  drivers/dma/at_hdmac_regs.h |   24 +++++++
>  2 files changed, 149 insertions(+), 34 deletions(-)
> 
Hi Nicolas,

I tried to merge your branch, but I also get lot on unwanted commits :(
Looks like this branch is based on current Linus's tree, I typically
base my next on rc-X and not any random commit.

Either you can rebase to latest rc-X and I will merge, or since I
created a test branch I can extract your 4 patches and apply to my next.

Let me know which way you prefer


-- 
~Vinod

[GIT PULL] dmaengine: at_hdmac fixes for next

[Koul, Vinod]

On Tue, 2011-08-16 at 15:56 +0200, Nicolas Ferre wrote:
> Vinod,
> 
> Please pull from:
> 
>   git://github.com/at91linux/linux-2.6-at91.git nfe/sdma_at_hdmac
> 
> to receive latest updates for the Atmel at_hdmac dmaengine driver. Those changes are made on top of current linus' git tree (v3.1-rc2-59-g5bad33c).
> The patches below have been discussed on the linux-arm-kernel mailing-list.
> 
> Thanks,
> 
> Nicolas Ferre (4):
>       dmaengine: at_hdmac: replace spin_lock* with irqsave variants
>       dmaengine: at_hdmac: improve power management routines
>       dmaengine: at_hdmac: add wrappers for testing channel state
>       dmaengine: at_hdmac: fix way to specify cyclic capability
> 
>  drivers/dma/at_hdmac.c      |  159 +++++++++++++++++++++++++++++++++---------
>  drivers/dma/at_hdmac_regs.h |   24 +++++++
>  2 files changed, 149 insertions(+), 34 deletions(-)
> 
Hi Nicolas,

I tried to merge your branch, but I also get lot on unwanted commits :(
Looks like this branch is based on current Linus's tree, I typically
base my next on rc-X and not any random commit.

Either you can rebase to latest rc-X and I will merge, or since I
created a test branch I can extract your 4 patches and apply to my next.

Let me know which way you prefer


-- 
~Vinod

Re: [GIT PULL] dmaengine: at_hdmac fixes for next

[Nicolas Ferre]

Le 19/08/2011 14:53, Koul, Vinod :
> On Tue, 2011-08-16 at 15:56 +0200, Nicolas Ferre wrote:
>> Vinod,
>>
>> Please pull from:
>>
>>   git://github.com/at91linux/linux-2.6-at91.git nfe/sdma_at_hdmac
>>
>> to receive latest updates for the Atmel at_hdmac dmaengine driver. Those changes are made on top of current linus' git tree (v3.1-rc2-59-g5bad33c).
>> The patches below have been discussed on the linux-arm-kernel mailing-list.
>>
>> Thanks,
>>
>> Nicolas Ferre (4):
>>       dmaengine: at_hdmac: replace spin_lock* with irqsave variants
>>       dmaengine: at_hdmac: improve power management routines
>>       dmaengine: at_hdmac: add wrappers for testing channel state
>>       dmaengine: at_hdmac: fix way to specify cyclic capability
>>
>>  drivers/dma/at_hdmac.c      |  159 +++++++++++++++++++++++++++++++++---------
>>  drivers/dma/at_hdmac_regs.h |   24 +++++++
>>  2 files changed, 149 insertions(+), 34 deletions(-)
>>
> Hi Nicolas,
> 
> I tried to merge your branch, but I also get lot on unwanted commits :(
> Looks like this branch is based on current Linus's tree, I typically
> base my next on rc-X and not any random commit.

Yes, I am sorry for that and realize that it can be a mess for you... I
will take the habit to cling to a -rcX for my pull requests.

> Either you can rebase to latest rc-X and I will merge, or since I
> created a test branch I can extract your 4 patches and apply to my next.

If you have a test branch close at hand you can extract my patches.
Thanks for your help.

Best regards,
-- 
Nicolas Ferre

[GIT PULL] dmaengine: at_hdmac fixes for next

[Nicolas Ferre]

Le 19/08/2011 14:53, Koul, Vinod :
> On Tue, 2011-08-16 at 15:56 +0200, Nicolas Ferre wrote:
>> Vinod,
>>
>> Please pull from:
>>
>>   git://github.com/at91linux/linux-2.6-at91.git nfe/sdma_at_hdmac
>>
>> to receive latest updates for the Atmel at_hdmac dmaengine driver. Those changes are made on top of current linus' git tree (v3.1-rc2-59-g5bad33c).
>> The patches below have been discussed on the linux-arm-kernel mailing-list.
>>
>> Thanks,
>>
>> Nicolas Ferre (4):
>>       dmaengine: at_hdmac: replace spin_lock* with irqsave variants
>>       dmaengine: at_hdmac: improve power management routines
>>       dmaengine: at_hdmac: add wrappers for testing channel state
>>       dmaengine: at_hdmac: fix way to specify cyclic capability
>>
>>  drivers/dma/at_hdmac.c      |  159 +++++++++++++++++++++++++++++++++---------
>>  drivers/dma/at_hdmac_regs.h |   24 +++++++
>>  2 files changed, 149 insertions(+), 34 deletions(-)
>>
> Hi Nicolas,
> 
> I tried to merge your branch, but I also get lot on unwanted commits :(
> Looks like this branch is based on current Linus's tree, I typically
> base my next on rc-X and not any random commit.

Yes, I am sorry for that and realize that it can be a mess for you... I
will take the habit to cling to a -rcX for my pull requests.

> Either you can rebase to latest rc-X and I will merge, or since I
> created a test branch I can extract your 4 patches and apply to my next.

If you have a test branch close at hand you can extract my patches.
Thanks for your help.

Best regards,
-- 
Nicolas Ferre

Re: [GIT PULL] dmaengine: at_hdmac fixes for next

[Koul, Vinod]

On Fri, 2011-08-19 at 15:04 +0200, Nicolas Ferre wrote:
> Le 19/08/2011 14:53, Koul, Vinod :
> > On Tue, 2011-08-16 at 15:56 +0200, Nicolas Ferre wrote:
> >> Vinod,
> >>
> >> Please pull from:
> >>
> >>   git://github.com/at91linux/linux-2.6-at91.git nfe/sdma_at_hdmac
> >>
> >> to receive latest updates for the Atmel at_hdmac dmaengine driver. Those changes are made on top of current linus' git tree (v3.1-rc2-59-g5bad33c).
> >> The patches below have been discussed on the linux-arm-kernel mailing-list.
> >>
> >> Thanks,
> >>
> >> Nicolas Ferre (4):
> >>       dmaengine: at_hdmac: replace spin_lock* with irqsave variants
> >>       dmaengine: at_hdmac: improve power management routines
> >>       dmaengine: at_hdmac: add wrappers for testing channel state
> >>       dmaengine: at_hdmac: fix way to specify cyclic capability
> >>
> >>  drivers/dma/at_hdmac.c      |  159 +++++++++++++++++++++++++++++++++---------
> >>  drivers/dma/at_hdmac_regs.h |   24 +++++++
> >>  2 files changed, 149 insertions(+), 34 deletions(-)
> >>
> > Hi Nicolas,
> > 
> > I tried to merge your branch, but I also get lot on unwanted commits :(
> > Looks like this branch is based on current Linus's tree, I typically
> > base my next on rc-X and not any random commit.
> 
> Yes, I am sorry for that and realize that it can be a mess for you... I
> will take the habit to cling to a -rcX for my pull requests.
> 
> > Either you can rebase to latest rc-X and I will merge, or since I
> > created a test branch I can extract your 4 patches and apply to my next.
> 
> If you have a test branch close at hand you can extract my patches.
> Thanks for your help.
Okay, Applied, it should be pushing out now :)

yes I always create test branch for applying patches and do a ff merge
to next. That makes my workspace easy to manage and discard if anything
in my checks go wrong


-- 
~Vinod

[GIT PULL] dmaengine: at_hdmac fixes for next

[Koul, Vinod]

On Fri, 2011-08-19 at 15:04 +0200, Nicolas Ferre wrote:
> Le 19/08/2011 14:53, Koul, Vinod :
> > On Tue, 2011-08-16 at 15:56 +0200, Nicolas Ferre wrote:
> >> Vinod,
> >>
> >> Please pull from:
> >>
> >>   git://github.com/at91linux/linux-2.6-at91.git nfe/sdma_at_hdmac
> >>
> >> to receive latest updates for the Atmel at_hdmac dmaengine driver. Those changes are made on top of current linus' git tree (v3.1-rc2-59-g5bad33c).
> >> The patches below have been discussed on the linux-arm-kernel mailing-list.
> >>
> >> Thanks,
> >>
> >> Nicolas Ferre (4):
> >>       dmaengine: at_hdmac: replace spin_lock* with irqsave variants
> >>       dmaengine: at_hdmac: improve power management routines
> >>       dmaengine: at_hdmac: add wrappers for testing channel state
> >>       dmaengine: at_hdmac: fix way to specify cyclic capability
> >>
> >>  drivers/dma/at_hdmac.c      |  159 +++++++++++++++++++++++++++++++++---------
> >>  drivers/dma/at_hdmac_regs.h |   24 +++++++
> >>  2 files changed, 149 insertions(+), 34 deletions(-)
> >>
> > Hi Nicolas,
> > 
> > I tried to merge your branch, but I also get lot on unwanted commits :(
> > Looks like this branch is based on current Linus's tree, I typically
> > base my next on rc-X and not any random commit.
> 
> Yes, I am sorry for that and realize that it can be a mess for you... I
> will take the habit to cling to a -rcX for my pull requests.
> 
> > Either you can rebase to latest rc-X and I will merge, or since I
> > created a test branch I can extract your 4 patches and apply to my next.
> 
> If you have a test branch close at hand you can extract my patches.
> Thanks for your help.
Okay, Applied, it should be pushing out now :)

yes I always create test branch for applying patches and do a ff merge
to next. That makes my workspace easy to manage and discard if anything
in my checks go wrong


-- 
~Vinod