* [PATCH v2] mmc mxcmmc: fix falling back to PIO
@ 2011-08-25 9:33 ` Sascha Hauer
0 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-08-25 9:33 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Sascha Hauer, Chris Ball, linux-mmc
When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org
---
drivers/mmc/host/mxcmmc.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 14aa213..4dc9008 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -730,7 +730,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
dev_err(mmc_dev(host->mmc),
"failed to config DMA channel. Falling back to PIO\n");
dma_release_channel(host->dma);
- host->do_dma = 0;
+ host->dma = NULL;
+ host->dma = 0;
}
}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2] mmc mxcmmc: fix falling back to PIO
@ 2011-08-25 9:33 ` Sascha Hauer
0 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-08-25 9:33 UTC (permalink / raw)
To: linux-arm-kernel
When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc at vger.kernel.org
---
drivers/mmc/host/mxcmmc.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 14aa213..4dc9008 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -730,7 +730,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
dev_err(mmc_dev(host->mmc),
"failed to config DMA channel. Falling back to PIO\n");
dma_release_channel(host->dma);
- host->do_dma = 0;
+ host->dma = NULL;
+ host->dma = 0;
}
}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2] mmc mxcmmc: fix falling back to PIO
2011-08-25 9:33 ` Sascha Hauer
@ 2011-08-25 9:39 ` Sascha Hauer
-1 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-08-25 9:39 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Chris Ball, linux-mmc
On Thu, Aug 25, 2011 at 11:33:05AM +0200, Sascha Hauer wrote:
> When we can't configure the dma channel we want to fall
> back to PIO. We do this by setting host->do_dma to zero.
> This does not work as do_dma is used to see whether dma
> can be used for the current transfer. Instead, we have
> to set host->dma to NULL.
Argh. Still wrong. I stop sending patches for today.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2] mmc mxcmmc: fix falling back to PIO
@ 2011-08-25 9:39 ` Sascha Hauer
0 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-08-25 9:39 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Aug 25, 2011 at 11:33:05AM +0200, Sascha Hauer wrote:
> When we can't configure the dma channel we want to fall
> back to PIO. We do this by setting host->do_dma to zero.
> This does not work as do_dma is used to see whether dma
> can be used for the current transfer. Instead, we have
> to set host->dma to NULL.
Argh. Still wrong. I stop sending patches for today.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] mmc mxcmmc: fix falling back to PIO
2011-08-25 9:33 ` Sascha Hauer
@ 2011-11-11 14:48 ` Sascha Hauer
-1 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-11-11 14:48 UTC (permalink / raw)
To: Chris Ball; +Cc: linux-arm-kernel, linux-mmc
Hi Chris,
Can you take this one please?
Sascha
On Thu, Aug 25, 2011 at 11:33:05AM +0200, Sascha Hauer wrote:
> When we can't configure the dma channel we want to fall
> back to PIO. We do this by setting host->do_dma to zero.
> This does not work as do_dma is used to see whether dma
> can be used for the current transfer. Instead, we have
> to set host->dma to NULL.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: linux-mmc@vger.kernel.org
> ---
> drivers/mmc/host/mxcmmc.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> index 14aa213..4dc9008 100644
> --- a/drivers/mmc/host/mxcmmc.c
> +++ b/drivers/mmc/host/mxcmmc.c
> @@ -730,7 +730,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> dev_err(mmc_dev(host->mmc),
> "failed to config DMA channel. Falling back to PIO\n");
> dma_release_channel(host->dma);
> - host->do_dma = 0;
> + host->dma = NULL;
> + host->dma = 0;
> }
> }
>
> --
> 1.7.5.4
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2] mmc mxcmmc: fix falling back to PIO
@ 2011-11-11 14:48 ` Sascha Hauer
0 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-11-11 14:48 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chris,
Can you take this one please?
Sascha
On Thu, Aug 25, 2011 at 11:33:05AM +0200, Sascha Hauer wrote:
> When we can't configure the dma channel we want to fall
> back to PIO. We do this by setting host->do_dma to zero.
> This does not work as do_dma is used to see whether dma
> can be used for the current transfer. Instead, we have
> to set host->dma to NULL.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: linux-mmc at vger.kernel.org
> ---
> drivers/mmc/host/mxcmmc.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> index 14aa213..4dc9008 100644
> --- a/drivers/mmc/host/mxcmmc.c
> +++ b/drivers/mmc/host/mxcmmc.c
> @@ -730,7 +730,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> dev_err(mmc_dev(host->mmc),
> "failed to config DMA channel. Falling back to PIO\n");
> dma_release_channel(host->dma);
> - host->do_dma = 0;
> + host->dma = NULL;
> + host->dma = 0;
> }
> }
>
> --
> 1.7.5.4
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] mmc mxcmmc: fix falling back to PIO
2011-11-11 14:48 ` Sascha Hauer
@ 2011-11-11 15:13 ` Lothar Waßmann
-1 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2011-11-11 15:13 UTC (permalink / raw)
To: Sascha Hauer; +Cc: Chris Ball, linux-mmc, linux-arm-kernel
Hi,
Sascha Hauer writes:
> Hi Chris,
>
> Can you take this one please?
>
> Sascha
>
> On Thu, Aug 25, 2011 at 11:33:05AM +0200, Sascha Hauer wrote:
> > When we can't configure the dma channel we want to fall
> > back to PIO. We do this by setting host->do_dma to zero.
> > This does not work as do_dma is used to see whether dma
> > can be used for the current transfer. Instead, we have
> > to set host->dma to NULL.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > Cc: Chris Ball <cjb@laptop.org>
> > Cc: linux-mmc@vger.kernel.org
> > ---
> > drivers/mmc/host/mxcmmc.c | 3 ++-
> > 1 files changed, 2 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> > index 14aa213..4dc9008 100644
> > --- a/drivers/mmc/host/mxcmmc.c
> > +++ b/drivers/mmc/host/mxcmmc.c
> > @@ -730,7 +730,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > dev_err(mmc_dev(host->mmc),
> > "failed to config DMA channel. Falling back to PIO\n");
> > dma_release_channel(host->dma);
> > - host->do_dma = 0;
> > + host->dma = NULL;
> > + host->dma = 0;
NULL or 0, that is the question? Or both?
That looks a little bit screwed.
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@karo-electronics.de
___________________________________________________________
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2] mmc mxcmmc: fix falling back to PIO
@ 2011-11-11 15:13 ` Lothar Waßmann
0 siblings, 0 replies; 10+ messages in thread
From: Lothar Waßmann @ 2011-11-11 15:13 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Sascha Hauer writes:
> Hi Chris,
>
> Can you take this one please?
>
> Sascha
>
> On Thu, Aug 25, 2011 at 11:33:05AM +0200, Sascha Hauer wrote:
> > When we can't configure the dma channel we want to fall
> > back to PIO. We do this by setting host->do_dma to zero.
> > This does not work as do_dma is used to see whether dma
> > can be used for the current transfer. Instead, we have
> > to set host->dma to NULL.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > Cc: Chris Ball <cjb@laptop.org>
> > Cc: linux-mmc at vger.kernel.org
> > ---
> > drivers/mmc/host/mxcmmc.c | 3 ++-
> > 1 files changed, 2 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> > index 14aa213..4dc9008 100644
> > --- a/drivers/mmc/host/mxcmmc.c
> > +++ b/drivers/mmc/host/mxcmmc.c
> > @@ -730,7 +730,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > dev_err(mmc_dev(host->mmc),
> > "failed to config DMA channel. Falling back to PIO\n");
> > dma_release_channel(host->dma);
> > - host->do_dma = 0;
> > + host->dma = NULL;
> > + host->dma = 0;
NULL or 0, that is the question? Or both?
That looks a little bit screwed.
Lothar Wa?mann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] mmc mxcmmc: fix falling back to PIO
2011-11-11 15:13 ` Lothar Waßmann
@ 2011-11-11 15:28 ` Sascha Hauer
-1 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-11-11 15:28 UTC (permalink / raw)
To: Lothar Waßmann; +Cc: Chris Ball, linux-mmc, linux-arm-kernel
On Fri, Nov 11, 2011 at 04:13:41PM +0100, Lothar Waßmann wrote:
> Hi,
>
> Sascha Hauer writes:
> > Hi Chris,
> >
> > Can you take this one please?
> >
> > Sascha
> >
> > On Thu, Aug 25, 2011 at 11:33:05AM +0200, Sascha Hauer wrote:
> > > When we can't configure the dma channel we want to fall
> > > back to PIO. We do this by setting host->do_dma to zero.
> > > This does not work as do_dma is used to see whether dma
> > > can be used for the current transfer. Instead, we have
> > > to set host->dma to NULL.
> > >
> > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > Cc: Chris Ball <cjb@laptop.org>
> > > Cc: linux-mmc@vger.kernel.org
> > > ---
> > > drivers/mmc/host/mxcmmc.c | 3 ++-
> > > 1 files changed, 2 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> > > index 14aa213..4dc9008 100644
> > > --- a/drivers/mmc/host/mxcmmc.c
> > > +++ b/drivers/mmc/host/mxcmmc.c
> > > @@ -730,7 +730,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > > dev_err(mmc_dev(host->mmc),
> > > "failed to config DMA channel. Falling back to PIO\n");
> > > dma_release_channel(host->dma);
> > > - host->do_dma = 0;
> > > + host->dma = NULL;
> > > + host->dma = 0;
> NULL or 0, that is the question? Or both?
> That looks a little bit screwed.
NULL. Hm, this was already fixed in my tree. I just sent an updated
patch.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2] mmc mxcmmc: fix falling back to PIO
@ 2011-11-11 15:28 ` Sascha Hauer
0 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2011-11-11 15:28 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Nov 11, 2011 at 04:13:41PM +0100, Lothar Wa?mann wrote:
> Hi,
>
> Sascha Hauer writes:
> > Hi Chris,
> >
> > Can you take this one please?
> >
> > Sascha
> >
> > On Thu, Aug 25, 2011 at 11:33:05AM +0200, Sascha Hauer wrote:
> > > When we can't configure the dma channel we want to fall
> > > back to PIO. We do this by setting host->do_dma to zero.
> > > This does not work as do_dma is used to see whether dma
> > > can be used for the current transfer. Instead, we have
> > > to set host->dma to NULL.
> > >
> > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > Cc: Chris Ball <cjb@laptop.org>
> > > Cc: linux-mmc at vger.kernel.org
> > > ---
> > > drivers/mmc/host/mxcmmc.c | 3 ++-
> > > 1 files changed, 2 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> > > index 14aa213..4dc9008 100644
> > > --- a/drivers/mmc/host/mxcmmc.c
> > > +++ b/drivers/mmc/host/mxcmmc.c
> > > @@ -730,7 +730,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > > dev_err(mmc_dev(host->mmc),
> > > "failed to config DMA channel. Falling back to PIO\n");
> > > dma_release_channel(host->dma);
> > > - host->do_dma = 0;
> > > + host->dma = NULL;
> > > + host->dma = 0;
> NULL or 0, that is the question? Or both?
> That looks a little bit screwed.
NULL. Hm, this was already fixed in my tree. I just sent an updated
patch.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-11-11 15:29 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-25 9:33 [PATCH v2] mmc mxcmmc: fix falling back to PIO Sascha Hauer
2011-08-25 9:33 ` Sascha Hauer
2011-08-25 9:39 ` Sascha Hauer
2011-08-25 9:39 ` Sascha Hauer
2011-11-11 14:48 ` Sascha Hauer
2011-11-11 14:48 ` Sascha Hauer
2011-11-11 15:13 ` Lothar Waßmann
2011-11-11 15:13 ` Lothar Waßmann
2011-11-11 15:28 ` Sascha Hauer
2011-11-11 15:28 ` Sascha Hauer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.