[PATCH 0/14] skb fragment API: convert network drivers (part I)

[PATCH 0/14] skb fragment API: convert network drivers (part I)

[Ian Campbell]

The following series converts the first batch of network drivers to the
SKB pages fragment API introduced in 131ea6675c76. I expect there will
be ~4 similarly sized batches to convert all the drivers over.

This is part of my series to enable visibility into SKB paged fragment's
lifecycles, [0] contains some more background and rationale but
basically the completed series will allow entities which inject pages
into the networking stack to receive a notification when the stack has
really finished with those pages (i.e. including retransmissions,
clones, pull-ups etc) and not just when the original skb is finished
with, which is beneficial to many subsystems which wish to inject pages
into the network stack without giving up full ownership of those page's
lifecycle. It implements something broadly along the lines of what was
described in [1].

Cheers,
Ian.

[0] http://marc.info/?l=linux-netdev&m=131072801125521&w=2
[1] http://marc.info/?l=linux-netdev&m=130925719513084&w=2

[PATCH 01/14] 3c59x: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/3com/3c59x.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 6e1f595..9ca45dc 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -2179,9 +2179,10 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 			vp->tx_ring[entry].frag[i+1].addr =
-					cpu_to_le32(pci_map_single(VORTEX_PCI(vp),
-											   (void*)page_address(frag->page) + frag->page_offset,
-											   frag->size, PCI_DMA_TODEVICE));
+					cpu_to_le32(pci_map_single(
+						VORTEX_PCI(vp),
+						(void *)skb_frag_address(frag),
+						frag->size, PCI_DMA_TODEVICE));
 
 			if (i == skb_shinfo(skb)->nr_frags-1)
 					vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size|LAST_FRAG);
-- 
1.7.2.5

[PATCH 02/14] 8139cp: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/realtek/8139cp.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 5d2d1b8..c77d5af 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -784,8 +784,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
 
 			len = this_frag->size;
 			mapping = dma_map_single(&cp->pdev->dev,
-						 ((void *) page_address(this_frag->page) +
-						  this_frag->page_offset),
+						 skb_frag_address(this_frag),
 						 len, PCI_DMA_TODEVICE);
 			eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
 
-- 
1.7.2.5

[PATCH 03/14] acenic: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: linux-acenic@sunsite.dk
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/alteon/acenic.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/alteon/acenic.c b/drivers/net/ethernet/alteon/acenic.c
index 1d6f2db..8794cf8 100644
--- a/drivers/net/ethernet/alteon/acenic.c
+++ b/drivers/net/ethernet/alteon/acenic.c
@@ -2485,9 +2485,9 @@ restart:
 			info = ap->skb->tx_skbuff + idx;
 			desc = ap->tx_ring + idx;
 
-			mapping = pci_map_page(ap->pdev, frag->page,
-					       frag->page_offset, frag->size,
-					       PCI_DMA_TODEVICE);
+			mapping = skb_frag_dma_map(&ap->pdev->dev, frag, 0,
+						   frag->size,
+						   PCI_DMA_TODEVICE);
 
 			flagsize = (frag->size << 16);
 			if (skb->ip_summed == CHECKSUM_PARTIAL)
-- 
1.7.2.5

[PATCH 04/14] atl1c: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: Jie Yang <jie.yang@atheros.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index acb4c10..2b9f925 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -2180,11 +2180,10 @@ static void atl1c_tx_map(struct atl1c_adapter *adapter,
 
 		buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
 		buffer_info->length = frag->size;
-		buffer_info->dma =
-			pci_map_page(adapter->pdev, frag->page,
-					frag->page_offset,
-					buffer_info->length,
-					PCI_DMA_TODEVICE);
+		buffer_info->dma = skb_frag_dma_map(&adapter->pdev->dev,
+						    frag, 0,
+						    buffer_info->length,
+						    PCI_DMA_TODEVICE);
 		ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
 		ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_PAGE,
 			ATL1C_PCIMAP_TODEVICE);
-- 
1.7.2.5

[PATCH 05/14] atl1e: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: Jie Yang <jie.yang@atheros.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c |   11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 1b5dc79..7e27eb3 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -1765,12 +1765,11 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
 				MAX_TX_BUF_LEN : buf_len;
 			buf_len -= tx_buffer->length;
 
-			tx_buffer->dma =
-				pci_map_page(adapter->pdev, frag->page,
-						frag->page_offset +
-						(i * MAX_TX_BUF_LEN),
-						tx_buffer->length,
-						PCI_DMA_TODEVICE);
+			tx_buffer->dma = skb_frag_dma_map(&adapter->pdev->dev,
+							  frag,
+							  (i * MAX_TX_BUF_LEN),
+							  tx_buffer->length,
+							  PCI_DMA_TODEVICE);
 			ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_PAGE);
 			use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
 			use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
-- 
1.7.2.5

[PATCH 06/14] atlx: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: Jie Yang <jie.yang@atheros.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/atheros/atlx/atl1.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index c34e8239..edf826a 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -2283,9 +2283,8 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
 			buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
 				ATL1_MAX_TX_BUF_LEN : buf_len;
 			buf_len -= buffer_info->length;
-			buffer_info->dma = pci_map_page(adapter->pdev,
-				frag->page,
-				frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN),
+			buffer_info->dma = skb_frag_dma_map(&adapter->pdev->dev,
+				frag, i * ATL1_MAX_TX_BUF_LEN,
 				buffer_info->length, PCI_DMA_TODEVICE);
 
 			if (++next_to_use == tpd_ring->count)
-- 
1.7.2.5

[PATCH 07/14] benet: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/emulex/benet/be_main.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index fb2eda0..59d54d1 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -638,8 +638,8 @@ static int make_tx_wrbs(struct be_adapter *adapter, struct be_queue_info *txq,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		struct skb_frag_struct *frag =
 			&skb_shinfo(skb)->frags[i];
-		busaddr = dma_map_page(dev, frag->page, frag->page_offset,
-				       frag->size, DMA_TO_DEVICE);
+		busaddr = skb_frag_dma_map(dev, frag, 0,
+					   frag->size, DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, busaddr))
 			goto dma_err;
 		wrb = queue_head_node(txq);
@@ -1066,7 +1066,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter, struct be_rx_obj *rxo,
 		skb->tail += curr_frag_len;
 	} else {
 		skb_shinfo(skb)->nr_frags = 1;
-		skb_shinfo(skb)->frags[0].page = page_info->page;
+		skb_frag_set_page(skb, 0, page_info->page);
 		skb_shinfo(skb)->frags[0].page_offset =
 					page_info->page_offset + hdr_len;
 		skb_shinfo(skb)->frags[0].size = curr_frag_len - hdr_len;
@@ -1091,7 +1091,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter, struct be_rx_obj *rxo,
 		if (page_info->page_offset == 0) {
 			/* Fresh page */
 			j++;
-			skb_shinfo(skb)->frags[j].page = page_info->page;
+			skb_frag_set_page(skb, j, page_info->page);
 			skb_shinfo(skb)->frags[j].page_offset =
 							page_info->page_offset;
 			skb_shinfo(skb)->frags[j].size = 0;
@@ -1173,7 +1173,7 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 		if (i == 0 || page_info->page_offset == 0) {
 			/* First frag or Fresh page */
 			j++;
-			skb_shinfo(skb)->frags[j].page = page_info->page;
+			skb_frag_set_page(skb, j, page_info->page);
 			skb_shinfo(skb)->frags[j].page_offset =
 							page_info->page_offset;
 			skb_shinfo(skb)->frags[j].size = 0;
-- 
1.7.2.5

[PATCH 08/14] bna: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Rasesh Mody <rmody@brocade.com>
Cc: Debashis Dutt <ddutt@brocade.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/brocade/bna/bnad.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index 6ad4b47..181561c 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -2703,8 +2703,8 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 		BUG_ON(!(size <= BFI_TX_MAX_DATA_PER_VECTOR));
 		txqent->vector[vect_id].length = htons(size);
-		dma_addr = dma_map_page(&bnad->pcidev->dev, frag->page,
-					frag->page_offset, size, DMA_TO_DEVICE);
+		dma_addr = skb_frag_dma_map(&bnad->pcidev->dev, frag,
+					    0, size, DMA_TO_DEVICE);
 		dma_unmap_addr_set(&unmap_q->unmap_array[unmap_prod], dma_addr,
 				   dma_addr);
 		BNA_SET_DMA_ADDR(dma_addr, &txqent->vector[vect_id].host_addr);
-- 
1.7.2.5

[PATCH 09/14] cassini: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/sun/cassini.c |   15 +++++++--------
 1 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 1776a37..f07a721 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -2048,8 +2048,8 @@ static int cas_rx_process_pkt(struct cas *cp, struct cas_rx_comp *rxc,
 		skb->truesize += hlen - swivel;
 		skb->len      += hlen - swivel;
 
-		get_page(page->buffer);
-		frag->page = page->buffer;
+		__skb_frag_set_page(frag, page->buffer);
+		__skb_frag_ref(frag);
 		frag->page_offset = off;
 		frag->size = hlen - swivel;
 
@@ -2072,8 +2072,8 @@ static int cas_rx_process_pkt(struct cas *cp, struct cas_rx_comp *rxc,
 			skb->len      += hlen;
 			frag++;
 
-			get_page(page->buffer);
-			frag->page = page->buffer;
+			__skb_frag_set_page(frag, page->buffer);
+			__skb_frag_ref(frag);
 			frag->page_offset = 0;
 			frag->size = hlen;
 			RX_USED_ADD(page, hlen + cp->crc_size);
@@ -2830,9 +2830,8 @@ static inline int cas_xmit_tx_ringN(struct cas *cp, int ring,
 		skb_frag_t *fragp = &skb_shinfo(skb)->frags[frag];
 
 		len = fragp->size;
-		mapping = pci_map_page(cp->pdev, fragp->page,
-				       fragp->page_offset, len,
-				       PCI_DMA_TODEVICE);
+		mapping = skb_frag_dma_map(&cp->pdev->dev, fragp, 0, len,
+					   PCI_DMA_TODEVICE);
 
 		tabort = cas_calc_tabort(cp, fragp->page_offset, len);
 		if (unlikely(tabort)) {
@@ -2843,7 +2842,7 @@ static inline int cas_xmit_tx_ringN(struct cas *cp, int ring,
 				      ctrl, 0);
 			entry = TX_DESC_NEXT(ring, entry);
 
-			addr = cas_page_map(fragp->page);
+			addr = cas_page_map(skb_frag_page(fragp));
 			memcpy(tx_tiny_buf(cp, ring, entry),
 			       addr + fragp->page_offset + len - tabort,
 			       tabort);
-- 
1.7.2.5

[PATCH 10/14] intel: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Cc: Don Skidmore <donald.c.skidmore@intel.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: Alex Duyck <alexander.h.duyck@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/intel/e1000/e1000_main.c     |   16 +++++++++-------
 drivers/net/ethernet/intel/e1000e/netdev.c        |    7 +++----
 drivers/net/ethernet/intel/igb/igb_main.c         |    5 +----
 drivers/net/ethernet/intel/igbvf/netdev.c         |    5 +----
 drivers/net/ethernet/intel/ixgb/ixgb_main.c       |    6 +++---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     |    3 +--
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |   10 ++++------
 7 files changed, 22 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 4a32c15..27f586a 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -2911,9 +2911,10 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = frag->size;
-		offset = frag->page_offset;
+		offset = 0;
 
 		while (len) {
+			unsigned long bufend;
 			i++;
 			if (unlikely(i == tx_ring->count))
 				i = 0;
@@ -2927,18 +2928,19 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			/* Workaround for potential 82544 hang in PCI-X.
 			 * Avoid terminating buffers within evenly-aligned
 			 * dwords. */
+			bufend = (unsigned long)
+				page_to_phys(skb_frag_page(frag));
+			bufend += offset + size - 1;
 			if (unlikely(adapter->pcix_82544 &&
-			    !((unsigned long)(page_to_phys(frag->page) + offset
-			                      + size - 1) & 4) &&
-			    size > 4))
+				     !(bufend & 4) &&
+				     size > 4))
 				size -= 4;
 
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
 			buffer_info->mapped_as_page = true;
-			buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
-							offset,	size,
-							DMA_TO_DEVICE);
+			buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
+						offset, size, DMA_TO_DEVICE);
 			if (dma_mapping_error(&pdev->dev, buffer_info->dma))
 				goto dma_error;
 			buffer_info->next_to_watch = i;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 9742bc6..b585383 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4677,7 +4677,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = frag->size;
-		offset = frag->page_offset;
+		offset = 0;
 
 		while (len) {
 			i++;
@@ -4690,9 +4690,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
 			buffer_info->next_to_watch = i;
-			buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
-							offset, size,
-							DMA_TO_DEVICE);
+			buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
+						offset, size, DMA_TO_DEVICE);
 			buffer_info->mapped_as_page = true;
 			if (dma_mapping_error(&pdev->dev, buffer_info->dma))
 				goto dma_error;
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 8016084..3cb1bc9 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4174,10 +4174,7 @@ static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
 		buffer_info->mapped_as_page = true;
-		buffer_info->dma = dma_map_page(dev,
-						frag->page,
-						frag->page_offset,
-						len,
+		buffer_info->dma = skb_frag_dma_map(dev, frag, 0, len,
 						DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, buffer_info->dma))
 			goto dma_error;
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index a6bdb3c..b3d760b 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -2061,10 +2061,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
 		buffer_info->mapped_as_page = true;
-		buffer_info->dma = dma_map_page(&pdev->dev,
-						frag->page,
-						frag->page_offset,
-						len,
+		buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag, 0, len,
 						DMA_TO_DEVICE);
 		if (dma_mapping_error(&pdev->dev, buffer_info->dma))
 			goto dma_error;
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
index b8ef2c0..c8b9c90 100644
--- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -1341,7 +1341,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = frag->size;
-		offset = frag->page_offset;
+		offset = 0;
 
 		while (len) {
 			i++;
@@ -1361,8 +1361,8 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 			buffer_info->time_stamp = jiffies;
 			buffer_info->mapped_as_page = true;
 			buffer_info->dma =
-				dma_map_page(&pdev->dev, frag->page,
-					     offset, size, DMA_TO_DEVICE);
+				skb_frag_dma_map(&pdev->dev, frag, offset, size,
+						 DMA_TO_DEVICE);
 			if (dma_mapping_error(&pdev->dev, buffer_info->dma))
 				goto dma_error;
 			buffer_info->next_to_watch = 0;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index e8aad76..7dba3ab 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6562,8 +6562,7 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring,
 		offset = 0;
 		tx_flags |= IXGBE_TX_FLAGS_MAPPED_AS_PAGE;
 
-		dma = dma_map_page(dev, frag->page, frag->page_offset,
-				   size, DMA_TO_DEVICE);
+		dma = skb_frag_dma_map(dev, frag, 0, size, DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, dma))
 			goto dma_error;
 
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index b1e1c2d..3bc38e1 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -2919,18 +2919,16 @@ static int ixgbevf_tx_map(struct ixgbevf_adapter *adapter,
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = min((unsigned int)frag->size, total);
-		offset = frag->page_offset;
+		offset = 0;
 
 		while (len) {
 			tx_buffer_info = &tx_ring->tx_buffer_info[i];
 			size = min(len, (unsigned int)IXGBE_MAX_DATA_PER_TXD);
 
 			tx_buffer_info->length = size;
-			tx_buffer_info->dma = dma_map_page(&adapter->pdev->dev,
-							   frag->page,
-							   offset,
-							   size,
-							   DMA_TO_DEVICE);
+			tx_buffer_info->dma =
+				skb_frag_dma_map(&adapter->pdev->dev, frag,
+						 offset, size, DMA_TO_DEVICE);
 			tx_buffer_info->mapped_as_page = true;
 			if (dma_mapping_error(&pdev->dev, tx_buffer_info->dma))
 				goto dma_error;
-- 
1.7.2.5


------------------------------------------------------------------------------
Special Offer -- Download ArcSight Logger for FREE!
Finally, a world-class log management solution at an even better 
price-free! And you'll get a free "Love Thy Logs" t-shirt when you
download Logger. Secure your free ArcSight Logger TODAY!
http://p.sf.net/sfu/arcsisghtdev2dev
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel&#174; Ethernet, visit http://communities.intel.com/community/wired

[PATCH 11/14] enic: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Vasanthy Kolluri <vkolluri@cisco.com>
Cc: Roopa Prabhu <roprabhu@cisco.com>
Cc: David Wang <dwang2@cisco.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/cisco/enic/enic_main.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index c751c25..19c9272 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -591,9 +591,9 @@ static inline void enic_queue_wq_skb_cont(struct enic *enic,
 	for (frag = skb_shinfo(skb)->frags; len_left; frag++) {
 		len_left -= frag->size;
 		enic_queue_wq_desc_cont(wq, skb,
-			pci_map_page(enic->pdev, frag->page,
-				frag->page_offset, frag->size,
-				PCI_DMA_TODEVICE),
+			skb_frag_dma_map(&enic->pdev->dev,
+					 frag, 0, frag->size,
+					 PCI_DMA_TODEVICE),
 			frag->size,
 			(len_left == 0),	/* EOP? */
 			loopback);
@@ -705,14 +705,14 @@ static inline void enic_queue_wq_skb_tso(struct enic *enic,
 	for (frag = skb_shinfo(skb)->frags; len_left; frag++) {
 		len_left -= frag->size;
 		frag_len_left = frag->size;
-		offset = frag->page_offset;
+		offset = 0;
 
 		while (frag_len_left) {
 			len = min(frag_len_left,
 				(unsigned int)WQ_ENET_MAX_DESC_LEN);
-			dma_addr = pci_map_page(enic->pdev, frag->page,
-				offset, len,
-				PCI_DMA_TODEVICE);
+			dma_addr = skb_frag_dma_map(&enic->pdev->dev, frag,
+						    offset, len,
+						    PCI_DMA_TODEVICE);
 			enic_queue_wq_desc_cont(wq, skb,
 				dma_addr,
 				len,
-- 
1.7.2.5

[PATCH 12/14] forcedeth: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/nvidia/forcedeth.c |   14 ++++++++++----
 1 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 98bb64b..4e39b8c 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -2146,8 +2146,11 @@ static netdev_tx_t nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			prev_tx = put_tx;
 			prev_tx_ctx = np->put_tx_ctx;
 			bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
-			np->put_tx_ctx->dma = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt,
-							   PCI_DMA_TODEVICE);
+			np->put_tx_ctx->dma = skb_frag_dma_map(
+							&np->pci_dev->dev,
+							frag, offset,
+							bcnt,
+							PCI_DMA_TODEVICE);
 			np->put_tx_ctx->dma_len = bcnt;
 			np->put_tx_ctx->dma_single = 0;
 			put_tx->buf = cpu_to_le32(np->put_tx_ctx->dma);
@@ -2257,8 +2260,11 @@ static netdev_tx_t nv_start_xmit_optimized(struct sk_buff *skb,
 			prev_tx = put_tx;
 			prev_tx_ctx = np->put_tx_ctx;
 			bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
-			np->put_tx_ctx->dma = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt,
-							   PCI_DMA_TODEVICE);
+			np->put_tx_ctx->dma = skb_frag_dma_map(
+							&np->pci_dev->dev,
+							frag, offset,
+							bcnt,
+							PCI_DMA_TODEVICE);
 			np->put_tx_ctx->dma_len = bcnt;
 			np->put_tx_ctx->dma_single = 0;
 			put_tx->bufhigh = cpu_to_le32(dma_high(np->put_tx_ctx->dma));
-- 
1.7.2.5

[PATCH 13/14] gianfar: convert to SKB paged frag API.

[Ian Campbell]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/freescale/gianfar.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 81d409d..83199fd 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -2140,11 +2140,11 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			if (i == nr_frags - 1)
 				lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
 
-			bufaddr = dma_map_page(&priv->ofdev->dev,
-					skb_shinfo(skb)->frags[i].page,
-					skb_shinfo(skb)->frags[i].page_offset,
-					length,
-					DMA_TO_DEVICE);
+			bufaddr = skb_frag_dma_map(&priv->ofdev->dev,
+						   &skb_shinfo(skb)->frags[i],
+						   0,
+						   length,
+						   DMA_TO_DEVICE);
 
 			/* set the TxBD length and buffer pointer */
 			txbdp->bufPtr = bufaddr;
-- 
1.7.2.5

[PATCH 14/14] greth: convert to SKB paged frag API.

[Ian Campbell]

In order to avoid long lines also use phys_to_virt(page_to_phys(page)) =>
page_address(page) (since the are effectively the same thing for lowmem pages).

Also dump the frag's size instead of the headlen when dumping a frag.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/aeroflex/greth.c |   12 ++++--------
 1 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c
index a5f6b07..bc3bd34 100644
--- a/drivers/net/ethernet/aeroflex/greth.c
+++ b/drivers/net/ethernet/aeroflex/greth.c
@@ -113,9 +113,8 @@ static void greth_print_tx_packet(struct sk_buff *skb)
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 
 		print_hex_dump(KERN_DEBUG, "TX: ", DUMP_PREFIX_OFFSET, 16, 1,
-			       phys_to_virt(page_to_phys(skb_shinfo(skb)->frags[i].page)) +
-			       skb_shinfo(skb)->frags[i].page_offset,
-			       length, true);
+			       skb_frag_address(&skb_shinfo(skb)->frags[i]),
+			       skb_shinfo(skb)->frags[i].size, true);
 	}
 }
 
@@ -528,11 +527,8 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev)
 
 		greth_write_bd(&bdp->stat, status);
 
-		dma_addr = dma_map_page(greth->dev,
-					frag->page,
-					frag->page_offset,
-					frag->size,
-					DMA_TO_DEVICE);
+		dma_addr = skb_frag_dma_map(greth->dev, frag, 0, frag->size,
+					    DMA_TO_DEVICE);
 
 		if (unlikely(dma_mapping_error(greth->dev, dma_addr)))
 			goto frag_map_error;
-- 
1.7.2.5

[PATCH] MAINTAINERS: Update ATLX driver maintainers

[Ian Campbell]

jie.yang@atheros.com bounces and I get a 550 "Unknown address error". Perhaps
they have moved on?

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: Jie Yang <jie.yang@atheros.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: netdev@vger.kernel.org
---
 MAINTAINERS |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index d32e1ca..cb6ad5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1278,7 +1278,6 @@ F:	drivers/input/misc/ati_remote2.c
 ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
-M:	Jie Yang <jie.yang@atheros.com>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
-- 
1.7.2.5

[PATCH] MAINTAINERS: Update Cisco VIC driver maintainers

[Ian Campbell]

vkolluri@cisco.com bounces and I get "Unknown address error 550".

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Roopa Prabhu <roprabhu@cisco.com>
Cc: David Wang <dwang2@cisco.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: netdev@vger.kernel.org
---
 MAINTAINERS |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index cb6ad5f..a5e0b11 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1757,7 +1757,6 @@ F:	Documentation/zh_CN/
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
 M:	David Wang <dwang2@cisco.com>
 S:	Supported
-- 
1.7.2.5

[PATCH] MAINTAINERS: Update BNA 10G Maintainer

[Ian Campbell]

ddutt@brocade.com bounces with 550 "RESOLVER.ADR.RecipNotFound"

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Rasesh Mody <rmody@brocade.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: netdev@vger.kernel.org
---
 MAINTAINERS |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index a5e0b11..8516f1d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1573,7 +1573,6 @@ F:	drivers/scsi/bfa/
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
 M:	Rasesh Mody <rmody@brocade.com>
-M:	Debashis Dutt <ddutt@brocade.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/brocade/bna/
-- 
1.7.2.5

Re: [PATCH 10/14] intel: convert to SKB paged frag API.

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 1265 bytes --]

On Tue, 2011-08-30 at 02:18 -0700, Ian Campbell wrote:
> Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
> Cc: Bruce Allan <bruce.w.allan@intel.com>
> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
> Cc: Don Skidmore <donald.c.skidmore@intel.com>
> Cc: Greg Rose <gregory.v.rose@intel.com>
> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
> Cc: Alex Duyck <alexander.h.duyck@intel.com>
> Cc: John Ronciak <john.ronciak@intel.com>
> Cc: e1000-devel@lists.sourceforge.net
> Cc: netdev@vger.kernel.org
> ---
>  drivers/net/ethernet/intel/e1000/e1000_main.c     |   16
> +++++++++-------
>  drivers/net/ethernet/intel/e1000e/netdev.c        |    7 +++----
>  drivers/net/ethernet/intel/igb/igb_main.c         |    5 +----
>  drivers/net/ethernet/intel/igbvf/netdev.c         |    5 +----
>  drivers/net/ethernet/intel/ixgb/ixgb_main.c       |    6 +++---
>  drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     |    3 +--
>  drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |   10 ++++------
>  7 files changed, 22 insertions(+), 30 deletions(-) 

The changes look fine to me.

Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

Re: [PATCH] MAINTAINERS: Update ATLX driver maintainers

[Franco Fichtner]

Hi Ian,

On 08/30/2011 11:34 AM, Ian Campbell wrote:
> jie.yang@atheros.com bounces and I get a 550 "Unknown address error". Perhaps
> they have moved on?

Atheros is now part of Qualcomm. There is a patch by Luis floating
around fixing the MAINTAINERS file properly, but it hasn't been applied
yet. No need to apply this one here.


Franco

Re: [PATCH] MAINTAINERS: Update ATLX driver maintainers

[Ian Campbell]

On Tue, 2011-08-30 at 12:25 +0100, Franco Fichtner wrote:
> Hi Ian,
> 
> On 08/30/2011 11:34 AM, Ian Campbell wrote:
> > jie.yang@atheros.com bounces and I get a 550 "Unknown address error". Perhaps
> > they have moved on?
> 
> Atheros is now part of Qualcomm. There is a patch by Luis floating
> around fixing the MAINTAINERS file properly, but it hasn't been applied
> yet. No need to apply this one here.

OK thanks Franco.

Ian.

RE: [PATCH] MAINTAINERS: Update Cisco VIC driver maintainers

[David Wang (dwang2)]

Ian,

Vasanthy is no longer with Cisco; we will be removing her from any
future submissions.

Regards,

- Dave 

> -----Original Message-----
> From: Ian Campbell [mailto:ian.campbell@citrix.com] 
> Sent: Tuesday, August 30, 2011 2:41 AM
> To: netdev@vger.kernel.org
> Cc: Ian Campbell; Christian Benvenuti (benve); Roopa Prabhu 
> (roprabhu); David Wang (dwang2); Andrew Morton; Joe Perches
> Subject: [PATCH] MAINTAINERS: Update Cisco VIC driver maintainers
> 
> vkolluri@cisco.com bounces and I get "Unknown address error 550".
> 
> Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
> Cc: Christian Benvenuti <benve@cisco.com>
> Cc: Roopa Prabhu <roprabhu@cisco.com>
> Cc: David Wang <dwang2@cisco.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Joe Perches <joe@perches.com>
> Cc: netdev@vger.kernel.org
> ---
>  MAINTAINERS |    1 -
>  1 files changed, 0 insertions(+), 1 deletions(-)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index cb6ad5f..a5e0b11 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1757,7 +1757,6 @@ F:	Documentation/zh_CN/
>  
>  CISCO VIC ETHERNET NIC DRIVER
>  M:	Christian Benvenuti <benve@cisco.com>
> -M:	Vasanthy Kolluri <vkolluri@cisco.com>
>  M:	Roopa Prabhu <roprabhu@cisco.com>
>  M:	David Wang <dwang2@cisco.com>
>  S:	Supported
> --
> 1.7.2.5
> 
> 

Re: [PATCH 0/14] skb fragment API: convert network drivers (part I)

[David Miller]

From: Ian Campbell <Ian.Campbell@citrix.com>
Date: Tue, 30 Aug 2011 10:17:27 +0100

> The following series converts the first batch of network drivers to the
> SKB pages fragment API introduced in 131ea6675c76. I expect there will
> be ~4 similarly sized batches to convert all the drivers over.
> 
> This is part of my series to enable visibility into SKB paged fragment's
> lifecycles, [0] contains some more background and rationale but
> basically the completed series will allow entities which inject pages
> into the networking stack to receive a notification when the stack has
> really finished with those pages (i.e. including retransmissions,
> clones, pull-ups etc) and not just when the original skb is finished
> with, which is beneficial to many subsystems which wish to inject pages
> into the network stack without giving up full ownership of those page's
> lifecycle. It implements something broadly along the lines of what was
> described in [1].

All applied, thanks Ian.

Re: [PATCH] MAINTAINERS: Update Cisco VIC driver maintainers

[David Miller]

From: Ian Campbell <ian.campbell@citrix.com>
Date: Tue, 30 Aug 2011 10:41:09 +0100

> vkolluri@cisco.com bounces and I get "Unknown address error 550".
> 
> Signed-off-by: Ian Campbell <ian.campbell@citrix.com>

Applied.

Re: [PATCH] MAINTAINERS: Update BNA 10G Maintainer

[David Miller]

From: Ian Campbell <ian.campbell@citrix.com>
Date: Tue, 30 Aug 2011 10:42:58 +0100

> ddutt@brocade.com bounces with 550 "RESOLVER.ADR.RecipNotFound"
> 
> Signed-off-by: Ian Campbell <ian.campbell@citrix.com>

Applied, and the ATLX one is applied too.

Thanks.