* [PATCH REPOST v2 0/2] Add device tree probe for i2c-imx driver
@ 2011-09-08 7:09 ` Shawn Guo
0 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2011-09-08 7:09 UTC (permalink / raw)
To: Ben Dooks
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
patches-QSEj5FYQhm4dnm+yROfE0A
Hi Ben,
This is a repost of the patch set below, which has been waiting for
your pickup for 6 weeks.
http://thread.gmane.org/gmane.linux.drivers.i2c/8850/
Regards,
Shawn
[PATCH REPOST 1/2] i2c-imx: remove init/exit hooks from platform data
[PATCH REPOST 2/2] i2c-imx: add device tree probe support
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH REPOST v2 0/2] Add device tree probe for i2c-imx driver
@ 2011-09-08 7:09 ` Shawn Guo
0 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2011-09-08 7:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi Ben,
This is a repost of the patch set below, which has been waiting for
your pickup for 6 weeks.
http://thread.gmane.org/gmane.linux.drivers.i2c/8850/
Regards,
Shawn
[PATCH REPOST 1/2] i2c-imx: remove init/exit hooks from platform data
[PATCH REPOST 2/2] i2c-imx: add device tree probe support
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH REPOST 1/2] i2c-imx: remove init/exit hooks from platform data
2011-09-08 7:09 ` Shawn Guo
@ 2011-09-08 7:09 ` Shawn Guo
-1 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2011-09-08 7:09 UTC (permalink / raw)
To: Ben Dooks
Cc: patches-QSEj5FYQhm4dnm+yROfE0A,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Ben Dooks, Darius Augulis,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
The init/exit hooks in platform data are being used nowhere, so can
be removed.
Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/plat-mxc/include/mach/i2c.h | 4 ----
drivers/i2c/busses/i2c-imx.c | 21 +++------------------
2 files changed, 3 insertions(+), 22 deletions(-)
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 4a5dc5c..375cdd0 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -11,14 +11,10 @@
/**
* struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @init: Initialise gpio's and other board specific things
- * @exit: Free everything initialised by @init
* @bitrate: Bus speed measured in Hz
*
**/
struct imxi2c_platform_data {
- int (*init)(struct device *dev);
- void (*exit)(struct device *dev);
int bitrate;
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 4c2a62b..54d809e 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -466,7 +466,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx;
struct resource *res;
- struct imxi2c_platform_data *pdata;
+ struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
void __iomem *base;
resource_size_t res_size;
int irq;
@@ -485,19 +485,11 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return -ENOENT;
}
- pdata = pdev->dev.platform_data;
-
- if (pdata && pdata->init) {
- ret = pdata->init(&pdev->dev);
- if (ret)
- return ret;
- }
-
res_size = resource_size(res);
if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
- ret = -EBUSY;
- goto fail0;
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ return -EBUSY;
}
base = ioremap(res->start, res_size);
@@ -586,9 +578,6 @@ fail2:
iounmap(base);
fail1:
release_mem_region(res->start, resource_size(res));
-fail0:
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
return ret; /* Return error number */
}
@@ -611,10 +600,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- /* Shut down hardware */
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
-
clk_put(i2c_imx->clk);
iounmap(i2c_imx->base);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH REPOST 1/2] i2c-imx: remove init/exit hooks from platform data
@ 2011-09-08 7:09 ` Shawn Guo
0 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2011-09-08 7:09 UTC (permalink / raw)
To: linux-arm-kernel
The init/exit hooks in platform data are being used nowhere, so can
be removed.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/plat-mxc/include/mach/i2c.h | 4 ----
drivers/i2c/busses/i2c-imx.c | 21 +++------------------
2 files changed, 3 insertions(+), 22 deletions(-)
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 4a5dc5c..375cdd0 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -11,14 +11,10 @@
/**
* struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @init: Initialise gpio's and other board specific things
- * @exit: Free everything initialised by @init
* @bitrate: Bus speed measured in Hz
*
**/
struct imxi2c_platform_data {
- int (*init)(struct device *dev);
- void (*exit)(struct device *dev);
int bitrate;
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 4c2a62b..54d809e 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -466,7 +466,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx;
struct resource *res;
- struct imxi2c_platform_data *pdata;
+ struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
void __iomem *base;
resource_size_t res_size;
int irq;
@@ -485,19 +485,11 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return -ENOENT;
}
- pdata = pdev->dev.platform_data;
-
- if (pdata && pdata->init) {
- ret = pdata->init(&pdev->dev);
- if (ret)
- return ret;
- }
-
res_size = resource_size(res);
if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
- ret = -EBUSY;
- goto fail0;
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ return -EBUSY;
}
base = ioremap(res->start, res_size);
@@ -586,9 +578,6 @@ fail2:
iounmap(base);
fail1:
release_mem_region(res->start, resource_size(res));
-fail0:
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
return ret; /* Return error number */
}
@@ -611,10 +600,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- /* Shut down hardware */
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
-
clk_put(i2c_imx->clk);
iounmap(i2c_imx->base);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH REPOST 2/2] i2c-imx: add device tree probe support
2011-09-08 7:09 ` Shawn Guo
@ 2011-09-08 7:09 ` Shawn Guo
-1 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2011-09-08 7:09 UTC (permalink / raw)
To: Ben Dooks
Cc: patches-QSEj5FYQhm4dnm+yROfE0A,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Ben Dooks, Darius Augulis,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
It adds device tree probe support for i2c-imx driver.
Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
---
.../devicetree/bindings/i2c/fsl-imx-i2c.txt | 25 ++++++++++++++++++++
drivers/i2c/busses/i2c-imx.c | 25 +++++++++++++++----
2 files changed, 44 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
new file mode 100644
index 0000000..f3cf43b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -0,0 +1,25 @@
+* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C/HS-I2C registers location and length
+- interrupts : Should contain I2C/HS-I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+ The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c@83fc4000 { /* I2C2 on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+};
+
+i2c@70038000 { /* HS-I2C on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x70038000 0x4000>;
+ interrupts = <64>;
+ clock-frequency = <400000>;
+};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 54d809e..58832e5 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
@@ -125,6 +128,11 @@ struct imx_i2c_struct {
unsigned int ifdr; /* IMX_I2C_IFDR */
};
+static const struct of_device_id i2c_imx_dt_ids[] = {
+ { .compatible = "fsl,imx1-i2c", },
+ { /* sentinel */ }
+};
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
@@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
void __iomem *base;
resource_size_t res_size;
- int irq;
+ int irq, bitrate;
int ret;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.algo = &i2c_imx_algo;
i2c_imx->adapter.dev.parent = &pdev->dev;
i2c_imx->adapter.nr = pdev->id;
+ i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->irq = irq;
i2c_imx->base = base;
i2c_imx->res = res;
@@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
/* Set up clock divider */
- if (pdata && pdata->bitrate)
- i2c_imx_set_clk(i2c_imx, pdata->bitrate);
- else
- i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+ bitrate = IMX_I2C_BIT_RATE;
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "clock-frequency", &bitrate);
+ if (ret < 0 && pdata && pdata->bitrate)
+ bitrate = pdata->bitrate;
+ i2c_imx_set_clk(i2c_imx, bitrate);
/* Set up chip registers to defaults */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
@@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
goto fail5;
}
+ of_i2c_register_devices(&i2c_imx->adapter);
+
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
@@ -584,7 +597,6 @@ fail1:
static int __exit i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
- struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
/* remove adapter */
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = i2c_imx_dt_ids,
}
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH REPOST 2/2] i2c-imx: add device tree probe support
@ 2011-09-08 7:09 ` Shawn Guo
0 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2011-09-08 7:09 UTC (permalink / raw)
To: linux-arm-kernel
It adds device tree probe support for i2c-imx driver.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
---
.../devicetree/bindings/i2c/fsl-imx-i2c.txt | 25 ++++++++++++++++++++
drivers/i2c/busses/i2c-imx.c | 25 +++++++++++++++----
2 files changed, 44 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
new file mode 100644
index 0000000..f3cf43b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -0,0 +1,25 @@
+* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C/HS-I2C registers location and length
+- interrupts : Should contain I2C/HS-I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+ The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c at 83fc4000 { /* I2C2 on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+};
+
+i2c at 70038000 { /* HS-I2C on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x70038000 0x4000>;
+ interrupts = <64>;
+ clock-frequency = <400000>;
+};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 54d809e..58832e5 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
@@ -125,6 +128,11 @@ struct imx_i2c_struct {
unsigned int ifdr; /* IMX_I2C_IFDR */
};
+static const struct of_device_id i2c_imx_dt_ids[] = {
+ { .compatible = "fsl,imx1-i2c", },
+ { /* sentinel */ }
+};
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
@@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
void __iomem *base;
resource_size_t res_size;
- int irq;
+ int irq, bitrate;
int ret;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.algo = &i2c_imx_algo;
i2c_imx->adapter.dev.parent = &pdev->dev;
i2c_imx->adapter.nr = pdev->id;
+ i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->irq = irq;
i2c_imx->base = base;
i2c_imx->res = res;
@@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
/* Set up clock divider */
- if (pdata && pdata->bitrate)
- i2c_imx_set_clk(i2c_imx, pdata->bitrate);
- else
- i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+ bitrate = IMX_I2C_BIT_RATE;
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "clock-frequency", &bitrate);
+ if (ret < 0 && pdata && pdata->bitrate)
+ bitrate = pdata->bitrate;
+ i2c_imx_set_clk(i2c_imx, bitrate);
/* Set up chip registers to defaults */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
@@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
goto fail5;
}
+ of_i2c_register_devices(&i2c_imx->adapter);
+
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
@@ -584,7 +597,6 @@ fail1:
static int __exit i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
- struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
/* remove adapter */
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = i2c_imx_dt_ids,
}
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH REPOST 2/2] i2c-imx: add device tree probe support
2011-09-08 7:09 ` Shawn Guo
@ 2011-09-09 5:14 ` Rob Herring
-1 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2011-09-09 5:14 UTC (permalink / raw)
To: Shawn Guo
Cc: Ben Dooks, patches-QSEj5FYQhm4dnm+yROfE0A,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Ben Dooks, Darius Augulis,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Shawn,
On 09/08/2011 02:09 AM, Shawn Guo wrote:
> It adds device tree probe support for i2c-imx driver.
>
> Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
> Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> ---
> .../devicetree/bindings/i2c/fsl-imx-i2c.txt | 25 ++++++++++++++++++++
> drivers/i2c/busses/i2c-imx.c | 25 +++++++++++++++----
> 2 files changed, 44 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> new file mode 100644
> index 0000000..f3cf43b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> @@ -0,0 +1,25 @@
> +* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
> +
> +Required properties:
> +- compatible : Should be "fsl,<chip>-i2c"
> +- reg : Should contain I2C/HS-I2C registers location and length
> +- interrupts : Should contain I2C/HS-I2C interrupt
> +
> +Optional properties:
> +- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
> + The absence of the propoerty indicates the default frequency 100 kHz.
> +
> +Examples:
> +
> +i2c@83fc4000 { /* I2C2 on i.MX51 */
> + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> + reg = <0x83fc4000 0x4000>;
> + interrupts = <63>;
> +};
> +
> +i2c@70038000 { /* HS-I2C on i.MX51 */
The mainline driver doesn't support the HS-I2C block does it?
The high speed and "old" i2c blocks on MX51 are basically different
blocks, so the compatible property should be different.
Rob
> + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> + reg = <0x70038000 0x4000>;
> + interrupts = <64>;
> + clock-frequency = <400000>;
> +};
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 54d809e..58832e5 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -48,6 +48,9 @@
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_i2c.h>
>
> #include <mach/irqs.h>
> #include <mach/hardware.h>
> @@ -125,6 +128,11 @@ struct imx_i2c_struct {
> unsigned int ifdr; /* IMX_I2C_IFDR */
> };
>
> +static const struct of_device_id i2c_imx_dt_ids[] = {
> + { .compatible = "fsl,imx1-i2c", },
> + { /* sentinel */ }
> +};
> +
> /** Functions for IMX I2C adapter driver ***************************************
> *******************************************************************************/
>
> @@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
> struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
> void __iomem *base;
> resource_size_t res_size;
> - int irq;
> + int irq, bitrate;
> int ret;
>
> dev_dbg(&pdev->dev, "<%s>\n", __func__);
> @@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
> i2c_imx->adapter.algo = &i2c_imx_algo;
> i2c_imx->adapter.dev.parent = &pdev->dev;
> i2c_imx->adapter.nr = pdev->id;
> + i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
> i2c_imx->irq = irq;
> i2c_imx->base = base;
> i2c_imx->res = res;
> @@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
> i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
>
> /* Set up clock divider */
> - if (pdata && pdata->bitrate)
> - i2c_imx_set_clk(i2c_imx, pdata->bitrate);
> - else
> - i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
> + bitrate = IMX_I2C_BIT_RATE;
> + ret = of_property_read_u32(pdev->dev.of_node,
> + "clock-frequency", &bitrate);
> + if (ret < 0 && pdata && pdata->bitrate)
> + bitrate = pdata->bitrate;
> + i2c_imx_set_clk(i2c_imx, bitrate);
>
> /* Set up chip registers to defaults */
> writeb(0, i2c_imx->base + IMX_I2C_I2CR);
> @@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
> goto fail5;
> }
>
> + of_i2c_register_devices(&i2c_imx->adapter);
> +
> /* Set up platform driver data */
> platform_set_drvdata(pdev, i2c_imx);
>
> @@ -584,7 +597,6 @@ fail1:
> static int __exit i2c_imx_remove(struct platform_device *pdev)
> {
> struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
> - struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>
> /* remove adapter */
> dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
> @@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
> .driver = {
> .name = DRIVER_NAME,
> .owner = THIS_MODULE,
> + .of_match_table = i2c_imx_dt_ids,
> }
> };
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH REPOST 2/2] i2c-imx: add device tree probe support
@ 2011-09-09 5:14 ` Rob Herring
0 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2011-09-09 5:14 UTC (permalink / raw)
To: linux-arm-kernel
Shawn,
On 09/08/2011 02:09 AM, Shawn Guo wrote:
> It adds device tree probe support for i2c-imx driver.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Darius Augulis <augulis.darius@gmail.com>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
> ---
> .../devicetree/bindings/i2c/fsl-imx-i2c.txt | 25 ++++++++++++++++++++
> drivers/i2c/busses/i2c-imx.c | 25 +++++++++++++++----
> 2 files changed, 44 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> new file mode 100644
> index 0000000..f3cf43b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
> @@ -0,0 +1,25 @@
> +* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
> +
> +Required properties:
> +- compatible : Should be "fsl,<chip>-i2c"
> +- reg : Should contain I2C/HS-I2C registers location and length
> +- interrupts : Should contain I2C/HS-I2C interrupt
> +
> +Optional properties:
> +- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
> + The absence of the propoerty indicates the default frequency 100 kHz.
> +
> +Examples:
> +
> +i2c at 83fc4000 { /* I2C2 on i.MX51 */
> + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> + reg = <0x83fc4000 0x4000>;
> + interrupts = <63>;
> +};
> +
> +i2c at 70038000 { /* HS-I2C on i.MX51 */
The mainline driver doesn't support the HS-I2C block does it?
The high speed and "old" i2c blocks on MX51 are basically different
blocks, so the compatible property should be different.
Rob
> + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> + reg = <0x70038000 0x4000>;
> + interrupts = <64>;
> + clock-frequency = <400000>;
> +};
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 54d809e..58832e5 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -48,6 +48,9 @@
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_i2c.h>
>
> #include <mach/irqs.h>
> #include <mach/hardware.h>
> @@ -125,6 +128,11 @@ struct imx_i2c_struct {
> unsigned int ifdr; /* IMX_I2C_IFDR */
> };
>
> +static const struct of_device_id i2c_imx_dt_ids[] = {
> + { .compatible = "fsl,imx1-i2c", },
> + { /* sentinel */ }
> +};
> +
> /** Functions for IMX I2C adapter driver ***************************************
> *******************************************************************************/
>
> @@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
> struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
> void __iomem *base;
> resource_size_t res_size;
> - int irq;
> + int irq, bitrate;
> int ret;
>
> dev_dbg(&pdev->dev, "<%s>\n", __func__);
> @@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
> i2c_imx->adapter.algo = &i2c_imx_algo;
> i2c_imx->adapter.dev.parent = &pdev->dev;
> i2c_imx->adapter.nr = pdev->id;
> + i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
> i2c_imx->irq = irq;
> i2c_imx->base = base;
> i2c_imx->res = res;
> @@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
> i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
>
> /* Set up clock divider */
> - if (pdata && pdata->bitrate)
> - i2c_imx_set_clk(i2c_imx, pdata->bitrate);
> - else
> - i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
> + bitrate = IMX_I2C_BIT_RATE;
> + ret = of_property_read_u32(pdev->dev.of_node,
> + "clock-frequency", &bitrate);
> + if (ret < 0 && pdata && pdata->bitrate)
> + bitrate = pdata->bitrate;
> + i2c_imx_set_clk(i2c_imx, bitrate);
>
> /* Set up chip registers to defaults */
> writeb(0, i2c_imx->base + IMX_I2C_I2CR);
> @@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
> goto fail5;
> }
>
> + of_i2c_register_devices(&i2c_imx->adapter);
> +
> /* Set up platform driver data */
> platform_set_drvdata(pdev, i2c_imx);
>
> @@ -584,7 +597,6 @@ fail1:
> static int __exit i2c_imx_remove(struct platform_device *pdev)
> {
> struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
> - struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
>
> /* remove adapter */
> dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
> @@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
> .driver = {
> .name = DRIVER_NAME,
> .owner = THIS_MODULE,
> + .of_match_table = i2c_imx_dt_ids,
> }
> };
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH REPOST 2/2] i2c-imx: add device tree probe support
2011-09-09 5:14 ` Rob Herring
@ 2011-09-09 7:18 ` Uwe Kleine-König
-1 siblings, 0 replies; 14+ messages in thread
From: Uwe Kleine-König @ 2011-09-09 7:18 UTC (permalink / raw)
To: Rob Herring
Cc: Shawn Guo, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
patches-QSEj5FYQhm4dnm+yROfE0A,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Ben Dooks, Darius Augulis,
Ben Dooks
Hello Rob,
On Fri, Sep 09, 2011 at 12:14:22AM -0500, Rob Herring wrote:
> > +i2c@83fc4000 { /* I2C2 on i.MX51 */
> > + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> > + reg = <0x83fc4000 0x4000>;
> > + interrupts = <63>;
> > +};
> > +
> > +i2c@70038000 { /* HS-I2C on i.MX51 */
>
> The mainline driver doesn't support the HS-I2C block does it?
>
> The high speed and "old" i2c blocks on MX51 are basically different
> blocks, so the compatible property should be different.
I stumbled about that recently, too and found in
arch/arm/plat-mxc/devices/platform-imx-i2c.c that the third device
description for imx51 is a normal "imx-i2c" one using
MX51_HSI2C_DMA_BASE_ADDR. So I concluded it's different but compatible.
board-mx51_babbage.c uses imx51_add_hsi2c but doesn't add a bus
description. So It might not attract attention if the driver doesn't
match the device.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH REPOST 2/2] i2c-imx: add device tree probe support
@ 2011-09-09 7:18 ` Uwe Kleine-König
0 siblings, 0 replies; 14+ messages in thread
From: Uwe Kleine-König @ 2011-09-09 7:18 UTC (permalink / raw)
To: linux-arm-kernel
Hello Rob,
On Fri, Sep 09, 2011 at 12:14:22AM -0500, Rob Herring wrote:
> > +i2c at 83fc4000 { /* I2C2 on i.MX51 */
> > + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> > + reg = <0x83fc4000 0x4000>;
> > + interrupts = <63>;
> > +};
> > +
> > +i2c at 70038000 { /* HS-I2C on i.MX51 */
>
> The mainline driver doesn't support the HS-I2C block does it?
>
> The high speed and "old" i2c blocks on MX51 are basically different
> blocks, so the compatible property should be different.
I stumbled about that recently, too and found in
arch/arm/plat-mxc/devices/platform-imx-i2c.c that the third device
description for imx51 is a normal "imx-i2c" one using
MX51_HSI2C_DMA_BASE_ADDR. So I concluded it's different but compatible.
board-mx51_babbage.c uses imx51_add_hsi2c but doesn't add a bus
description. So It might not attract attention if the driver doesn't
match the device.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH REPOST 2/2] i2c-imx: add device tree probe support
2011-09-09 7:18 ` Uwe Kleine-König
@ 2011-09-09 11:04 ` Shawn Guo
-1 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2011-09-09 11:04 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: Rob Herring, patches-QSEj5FYQhm4dnm+yROfE0A,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Ben Dooks,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Ben Dooks, Darius Augulis,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Fri, Sep 09, 2011 at 09:18:45AM +0200, Uwe Kleine-König wrote:
> Hello Rob,
>
> On Fri, Sep 09, 2011 at 12:14:22AM -0500, Rob Herring wrote:
> > > +i2c@83fc4000 { /* I2C2 on i.MX51 */
> > > + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> > > + reg = <0x83fc4000 0x4000>;
> > > + interrupts = <63>;
> > > +};
> > > +
> > > +i2c@70038000 { /* HS-I2C on i.MX51 */
> >
> > The mainline driver doesn't support the HS-I2C block does it?
> >
> > The high speed and "old" i2c blocks on MX51 are basically different
> > blocks, so the compatible property should be different.
> I stumbled about that recently, too and found in
> arch/arm/plat-mxc/devices/platform-imx-i2c.c that the third device
> description for imx51 is a normal "imx-i2c" one using
> MX51_HSI2C_DMA_BASE_ADDR. So I concluded it's different but compatible.
>
> board-mx51_babbage.c uses imx51_add_hsi2c but doesn't add a bus
> description. So It might not attract attention if the driver doesn't
> match the device.
>
Aha, I was confused by the platform codes. Will drop HSI2C.
Thanks for catching this, Rob.
--
Regards,
Shawn
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH REPOST 2/2] i2c-imx: add device tree probe support
@ 2011-09-09 11:04 ` Shawn Guo
0 siblings, 0 replies; 14+ messages in thread
From: Shawn Guo @ 2011-09-09 11:04 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Sep 09, 2011 at 09:18:45AM +0200, Uwe Kleine-K?nig wrote:
> Hello Rob,
>
> On Fri, Sep 09, 2011 at 12:14:22AM -0500, Rob Herring wrote:
> > > +i2c at 83fc4000 { /* I2C2 on i.MX51 */
> > > + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> > > + reg = <0x83fc4000 0x4000>;
> > > + interrupts = <63>;
> > > +};
> > > +
> > > +i2c at 70038000 { /* HS-I2C on i.MX51 */
> >
> > The mainline driver doesn't support the HS-I2C block does it?
> >
> > The high speed and "old" i2c blocks on MX51 are basically different
> > blocks, so the compatible property should be different.
> I stumbled about that recently, too and found in
> arch/arm/plat-mxc/devices/platform-imx-i2c.c that the third device
> description for imx51 is a normal "imx-i2c" one using
> MX51_HSI2C_DMA_BASE_ADDR. So I concluded it's different but compatible.
>
> board-mx51_babbage.c uses imx51_add_hsi2c but doesn't add a bus
> description. So It might not attract attention if the driver doesn't
> match the device.
>
Aha, I was confused by the platform codes. Will drop HSI2C.
Thanks for catching this, Rob.
--
Regards,
Shawn
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH REPOST 2/2] i2c-imx: add device tree probe support
2011-09-09 11:04 ` Shawn Guo
@ 2011-09-09 11:10 ` Lothar Waßmann
-1 siblings, 0 replies; 14+ messages in thread
From: Lothar Waßmann @ 2011-09-09 11:10 UTC (permalink / raw)
To: Shawn Guo
Cc: patches, devicetree-discuss, Ben Dooks, linux-i2c, Ben Dooks,
Uwe Kleine-König, Darius Augulis, linux-arm-kernel
Hi,
Shawn Guo writes:
> On Fri, Sep 09, 2011 at 09:18:45AM +0200, Uwe Kleine-König wrote:
> > Hello Rob,
> >
> > On Fri, Sep 09, 2011 at 12:14:22AM -0500, Rob Herring wrote:
> > > > +i2c@83fc4000 { /* I2C2 on i.MX51 */
> > > > + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> > > > + reg = <0x83fc4000 0x4000>;
> > > > + interrupts = <63>;
> > > > +};
> > > > +
> > > > +i2c@70038000 { /* HS-I2C on i.MX51 */
> > >
> > > The mainline driver doesn't support the HS-I2C block does it?
> > >
> > > The high speed and "old" i2c blocks on MX51 are basically different
> > > blocks, so the compatible property should be different.
> > I stumbled about that recently, too and found in
> > arch/arm/plat-mxc/devices/platform-imx-i2c.c that the third device
> > description for imx51 is a normal "imx-i2c" one using
> > MX51_HSI2C_DMA_BASE_ADDR. So I concluded it's different but compatible.
> >
> > board-mx51_babbage.c uses imx51_add_hsi2c but doesn't add a bus
> > description. So It might not attract attention if the driver doesn't
> > match the device.
> >
> Aha, I was confused by the platform codes. Will drop HSI2C.
>
According to the i.MX51 Ref. Manual it's so buggy that it should not even
be used:
|Chapter 39
|High Speed Inter IC (HS-I2C)
|39.1 Introduction
[...]
| NOTE
|Due to limited functionality, Freescale does not recommend users
|incorporate the HS-I2C module in future designs. For details on the
|limitations, refer to the MX51 IC Errata. Users should consider using the
|two standard I2C modules, which have no errata.
Fortunately there is an i2c-gpio driver that can be used on the
corresponding pins. ;-)
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@karo-electronics.de
___________________________________________________________
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH REPOST 2/2] i2c-imx: add device tree probe support
@ 2011-09-09 11:10 ` Lothar Waßmann
0 siblings, 0 replies; 14+ messages in thread
From: Lothar Waßmann @ 2011-09-09 11:10 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Shawn Guo writes:
> On Fri, Sep 09, 2011 at 09:18:45AM +0200, Uwe Kleine-K?nig wrote:
> > Hello Rob,
> >
> > On Fri, Sep 09, 2011 at 12:14:22AM -0500, Rob Herring wrote:
> > > > +i2c at 83fc4000 { /* I2C2 on i.MX51 */
> > > > + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
> > > > + reg = <0x83fc4000 0x4000>;
> > > > + interrupts = <63>;
> > > > +};
> > > > +
> > > > +i2c at 70038000 { /* HS-I2C on i.MX51 */
> > >
> > > The mainline driver doesn't support the HS-I2C block does it?
> > >
> > > The high speed and "old" i2c blocks on MX51 are basically different
> > > blocks, so the compatible property should be different.
> > I stumbled about that recently, too and found in
> > arch/arm/plat-mxc/devices/platform-imx-i2c.c that the third device
> > description for imx51 is a normal "imx-i2c" one using
> > MX51_HSI2C_DMA_BASE_ADDR. So I concluded it's different but compatible.
> >
> > board-mx51_babbage.c uses imx51_add_hsi2c but doesn't add a bus
> > description. So It might not attract attention if the driver doesn't
> > match the device.
> >
> Aha, I was confused by the platform codes. Will drop HSI2C.
>
According to the i.MX51 Ref. Manual it's so buggy that it should not even
be used:
|Chapter 39
|High Speed Inter IC (HS-I2C)
|39.1 Introduction
[...]
| NOTE
|Due to limited functionality, Freescale does not recommend users
|incorporate the HS-I2C module in future designs. For details on the
|limitations, refer to the MX51 IC Errata. Users should consider using the
|two standard I2C modules, which have no errata.
Fortunately there is an i2c-gpio driver that can be used on the
corresponding pins. ;-)
Lothar Wa?mann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2011-09-09 11:10 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-09-08 7:09 [PATCH REPOST v2 0/2] Add device tree probe for i2c-imx driver Shawn Guo
2011-09-08 7:09 ` Shawn Guo
[not found] ` <1315465775-31335-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-09-08 7:09 ` [PATCH REPOST 1/2] i2c-imx: remove init/exit hooks from platform data Shawn Guo
2011-09-08 7:09 ` Shawn Guo
2011-09-08 7:09 ` [PATCH REPOST 2/2] i2c-imx: add device tree probe support Shawn Guo
2011-09-08 7:09 ` Shawn Guo
[not found] ` <1315465775-31335-3-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-09-09 5:14 ` Rob Herring
2011-09-09 5:14 ` Rob Herring
[not found] ` <4E69A0AE.1060004-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-09-09 7:18 ` Uwe Kleine-König
2011-09-09 7:18 ` Uwe Kleine-König
[not found] ` <20110909071845.GI28816-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-09-09 11:04 ` Shawn Guo
2011-09-09 11:04 ` Shawn Guo
2011-09-09 11:10 ` Lothar Waßmann
2011-09-09 11:10 ` Lothar Waßmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.