From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: tony@atomide.com
Cc: linux-omap@vger.kernel.org, Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 05/10] OMAP: use dvi panel driver instead of generic-dpi
Date: Tue, 20 Sep 2011 11:18:21 +0300 [thread overview]
Message-ID: <1316506706-18941-6-git-send-email-tomi.valkeinen@ti.com> (raw)
In-Reply-To: <1316506706-18941-1-git-send-email-tomi.valkeinen@ti.com>
Multiple OMAP3/4 boards have a DVI framer output. This patch makes the
boards use the new panel-dvi driver, instead of the panel-generic-dpi
driver.
Separate drivers for fixed size panels and DVI framer gives us cleaner
driver code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 7 +++----
arch/arm/mach-omap2/board-am3517evm.c | 6 +++---
arch/arm/mach-omap2/board-cm-t35.c | 6 +++---
arch/arm/mach-omap2/board-devkit8000.c | 6 +++---
arch/arm/mach-omap2/board-igep0020.c | 7 +++----
arch/arm/mach-omap2/board-omap3beagle.c | 7 +++----
arch/arm/mach-omap2/board-omap3evm.c | 7 +++----
arch/arm/mach-omap2/board-omap3stalker.c | 6 +++---
arch/arm/mach-omap2/board-omap4panda.c | 7 +++----
arch/arm/mach-omap2/board-overo.c | 6 +++---
10 files changed, 30 insertions(+), 35 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd600cf..18c4d19 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -37,7 +37,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/gpmc-smc91x.h>
@@ -186,8 +186,7 @@ static struct omap_dss_device sdp3430_lcd_device = {
.platform_disable = sdp3430_panel_disable_lcd,
};
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
};
@@ -195,7 +194,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f3006c3..9a68ef5 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -36,6 +36,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include "mux.h"
#include "control.h"
@@ -333,8 +334,7 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
};
@@ -342,7 +342,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 3af8aab..2d112bf 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -43,6 +43,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <mach/hardware.h>
@@ -242,8 +243,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
.phy.dpi.data_lines = 18,
};
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
};
@@ -251,7 +251,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index da5057e..44da207 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -47,6 +47,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -152,8 +153,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
.phy.dpi.data_lines = 24,
};
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
};
@@ -161,7 +161,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 35be778..9fda8d8 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -32,7 +32,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/onenand.h>
#include "mux.h"
@@ -455,8 +455,7 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev)
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
};
@@ -464,7 +463,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device igep2_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..26bc860 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,7 +42,7 @@
#include <plat/board.h>
#include <plat/common.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@@ -203,8 +203,7 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
gpio_set_value(dssdev->reset_gpio, 0);
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
};
@@ -212,7 +211,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device beagle_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c452b3f..82142c5 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -45,7 +45,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -247,8 +247,7 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
@@ -256,7 +255,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8e10498..8ab99f1 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -41,6 +41,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -179,8 +180,7 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
};
@@ -188,7 +188,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..c35384e 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -40,7 +40,7 @@
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/mmc.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include "hsmmc.h"
#include "control.h"
@@ -455,8 +455,7 @@ static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
}
/* Using generic display panel */
-static struct panel_generic_dpi_data omap4_dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data omap4_dvi_panel = {
.platform_enable = omap4_panda_enable_dvi,
.platform_disable = omap4_panda_disable_dvi,
};
@@ -464,7 +463,7 @@ static struct panel_generic_dpi_data omap4_dvi_panel = {
struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f949a99..06064d5 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -46,6 +46,7 @@
#include <plat/common.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
@@ -182,8 +183,7 @@ static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = overo_panel_enable_dvi,
.platform_disable = overo_panel_disable_dvi,
};
@@ -191,7 +191,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device overo_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
--
1.7.4.1
next prev parent reply other threads:[~2011-09-20 8:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-20 8:18 [PATCH 00/10] OMAP DSS related board changes Tomi Valkeinen
2011-09-20 8:18 ` [PATCH 01/10] OMAP: DSS2: Change DSI device naming Tomi Valkeinen
2011-09-20 8:18 ` [PATCH 02/10] OMAP4: TWL: Add common omapdss supplies Tomi Valkeinen
2011-09-20 8:18 ` [PATCH 03/10] OMAP: Devkit8000: Change lcd driver to AT070TN83 Tomi Valkeinen
2011-09-20 12:35 ` Thomas Weber
2011-09-20 12:37 ` Tomi Valkeinen
2011-09-20 8:18 ` [PATCH 04/10] OMAP: DSS2: HDMI: use default dividers Tomi Valkeinen
2011-09-20 8:18 ` Tomi Valkeinen [this message]
2011-09-20 8:18 ` [PATCH 06/10] OMAP: stalker: Remove LCD device from board file Tomi Valkeinen
2011-09-20 8:18 ` [PATCH 07/10] OMAP: Add DDC i2c_bus_num to board files Tomi Valkeinen
2011-09-20 8:18 ` [PATCH 08/10] OMAP: 4430SDP: Remove unneeded lcd config Tomi Valkeinen
2011-09-20 8:18 ` [PATCH 09/10] OMAP4: 4430SDP: Add panel support to board file Tomi Valkeinen
2011-09-20 8:18 ` [PATCH 10/10] OMAP4: 4430SDP: Add picodlp " Tomi Valkeinen
2011-09-26 6:37 ` [PATCH 00/10] OMAP DSS related board changes Tomi Valkeinen
2011-09-29 17:52 ` Tony Lindgren
2011-09-30 5:20 ` Tomi Valkeinen
2011-10-04 0:32 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316506706-18941-6-git-send-email-tomi.valkeinen@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.