* [RFC][PATCH 00/30] Rework FSL MPC85xx/Pxxxx device trees
@ 2011-11-10 16:13 Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 01/30] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Posting this to get any feedback and review while I cleanup commit messages
and the such.
The general idea is to split out the SoC and IP blocks into their own files
that can be included to build up a board level device tree. This allows us
to reduce overall duplication and forward looking maintenance when updating
device nodes.
I've dropped numerous cases of compatiables that are of form "CHIP-IPname-.."
so as to use the basic IP dts includes as much as possible. In general this
is areas that drivers have not typically utilized.
I've moved all the changed .dts to a 4-cell MPIC IRQ and made other cleanups
that I'll comment on in the commit mesages.
- k
^ permalink raw reply [flat|nested] 45+ messages in thread
* [RFC][PATCH 01/30] powerpc/85xx: Simplify P1020RDB CAMP dts using includes
2011-11-10 16:13 [RFC][PATCH 00/30] Rework FSL MPC85xx/Pxxxx device trees Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 02/30] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
If we include the p1020rdb.dts instead of p1020si.dts we greatly reduce
duplication and maintenance. We can just list which devices are
disabled for the given core and mpic protected sources.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb_camp_core0.dts | 154 +------------------------
arch/powerpc/boot/dts/p1020rdb_camp_core1.dts | 11 +--
2 files changed, 4 insertions(+), 161 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
index f0bf7f4..41b4585 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
@@ -16,7 +16,7 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
/ {
model = "fsl,P1020RDB";
@@ -32,7 +32,7 @@
cpus {
PowerPC,P1020@1 {
- status = "disabled";
+ status = "disabled";
};
};
@@ -45,169 +45,19 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- spi-max-frequency = <40000000>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@b0000 {
status = "disabled";
};
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
mpic: pic@40000 {
protected-sources = <
42 29 30 34 /* serial1, enet0-queue-group0 */
17 18 24 45 /* enet0-queue-group1, crypto */
>;
};
-
- };
-
- pci0: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
};
};
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
index 6ec0220..5174538 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
@@ -15,7 +15,7 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
/ {
model = "fsl,P1020RDB";
@@ -28,7 +28,7 @@
cpus {
PowerPC,P1020@0 {
- status = "disabled";
+ status = "disabled";
};
};
@@ -85,12 +85,6 @@
status = "disabled";
};
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@b1000 {
status = "disabled";
};
@@ -135,7 +129,6 @@
global-utilities@e0000 { //global utilities block
status = "disabled";
};
-
};
pci0: pcie@ffe09000 {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 02/30] powerpc/85xx: Rework PCI nodes on P1020RDB
2011-11-10 16:13 ` [RFC][PATCH 01/30] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 03/30] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
* Move SoC specific details like irq mapping to SoC dtsi
* Update interrupt property to cover both error interrupt and PCIe
runtime interrupts
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 26 +---------------------
arch/powerpc/boot/dts/p1020si.dtsi | 40 ++++++++++++++++++++++++++++++++---
2 files changed, 38 insertions(+), 28 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index d6a8ae4..8b1a7ee 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -257,19 +257,8 @@
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -281,21 +270,10 @@
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 5c5acb6..58f6b30 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -352,26 +352,58 @@
pci0: pcie@ffe09000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
+ };
+
};
pci1: pcie@ffe0a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ };
};
};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 03/30] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB
2011-11-10 16:13 ` [RFC][PATCH 02/30] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 04/30] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
The SPI node is out of date with regards to the binding for fsl-espi and
driver support.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 30 +++++++++++++-----------------
arch/powerpc/boot/dts/p1020si.dtsi | 5 ++---
2 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index 8b1a7ee..b31e7ec 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -149,49 +149,45 @@
};
spi@7000 {
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
- partition@0 {
+ partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
+ label = "u-boot";
read-only;
};
- partition@80000 {
+ partition@dtb {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
+ label = "dtb";
read-only;
};
- partition@100000 {
+ partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
+ label = "kernel";
read-only;
};
- partition@500000 {
+ partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
+ label = "file system";
read-only;
};
- partition@900000 {
+ partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
+ label = "file system jffs2";
};
};
};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 58f6b30..25e10cf 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -112,14 +112,13 @@
};
spi@7000 {
- cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,espi";
+ compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2>;
interrupt-parent = <&mpic>;
- mode = "cpu";
+ fsl,espi-num-chipselects = <4>;
};
gpio: gpio-controller@f000 {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 04/30] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW
2011-11-10 16:13 ` [RFC][PATCH 03/30] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 05/30] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 25e10cf..5514e1d 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -305,15 +305,16 @@
};
crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
};
mpic: pic@40000 {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 05/30] powerpc/85xx: Add ethernet magic packet property to P1020 device tree
2011-11-10 16:13 ` [RFC][PATCH 04/30] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 06/30] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
All eTSEC2 controllers support waking on magic packet so fixup device
tree to report that.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 5514e1d..14dff69 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -200,6 +200,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
@@ -226,6 +227,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
@@ -252,6 +254,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 06/30] powerpc/85xx: p1020si.dtsi update interrupt handling
2011-11-10 16:13 ` [RFC][PATCH 05/30] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 07/30] powerpc/85xx: create dts components to build up an SoC Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
* set interrupt-parent at root so its not duplicate in every node
* Add mpic timers
* Move to 4-prop cells for mpic timer
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 117 +++++++++++++++++-------------------
1 files changed, 56 insertions(+), 61 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 14dff69..b08c848 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -14,6 +14,7 @@
compatible = "fsl,P1020";
#address-cells = <2>;
#size-cells = <2>;
+ interrupt-parent = <&mpic>;
cpus {
#address-cells = <1>;
@@ -37,8 +38,7 @@
#size-cells = <1>;
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
};
soc@ffe00000 {
@@ -58,15 +58,13 @@
ecm@1000 {
compatible = "fsl,p1020-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1020-memory-controller";
reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
i2c@3000 {
@@ -75,8 +73,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -86,8 +83,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -97,8 +93,7 @@
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -107,8 +102,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
spi@7000 {
@@ -116,8 +110,7 @@
#size-cells = <0>;
compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <59 0x2 0 0>;
fsl,espi-num-chipselects = <4>;
};
@@ -125,8 +118,7 @@
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <47 0x2 0 0>;
gpio-controller;
};
@@ -135,8 +127,7 @@
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
dma@21300 {
@@ -150,29 +141,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -202,20 +189,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
};
};
@@ -229,20 +215,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
};
};
@@ -256,20 +241,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
};
};
@@ -278,8 +262,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
+ interrupts = <28 0x2 0 0>;
};
/* USB2 is shared with localbus, so it must be disabled
@@ -292,8 +275,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
+ interrupts = <46 0x2 0 0>;
phy_type = "ulpi";
};
*/
@@ -301,8 +283,7 @@
sdhci@2e000 {
compatible = "fsl,p1020-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <72 0x2 0 0>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
@@ -312,8 +293,7 @@
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
"fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <45 2 0 0 58 2 0 0>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
@@ -323,26 +303,43 @@
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
+ timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+ };
+
+ timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+ };
+
msi@41600 {
compatible = "fsl,p1020-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 { //global utilities block
@@ -359,8 +356,7 @@
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
@@ -368,7 +364,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -388,8 +384,7 @@
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
@@ -397,7 +392,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 07/30] powerpc/85xx: create dts components to build up an SoC
2011-11-10 16:13 ` [RFC][PATCH 06/30] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Introduce some common components that we can utilize to build up the
various PQ3/85xx device trees.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi | 51 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi | 39 ++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi | 60 +++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi | 60 +++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi | 59 +++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi | 42 ++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi | 42 ++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi | 42 ++++++++
arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi | 43 ++++++++
arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi | 43 ++++++++
arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi | 42 ++++++++
arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi | 40 ++++++++
arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi | 40 ++++++++
arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi | 43 ++++++++
arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi | 45 +++++++++
arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi | 45 +++++++++
arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi | 45 +++++++++
arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi | 65 ++++++++++++
arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi | 51 ++++++++++
arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi | 51 ++++++++++
arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi | 40 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi | 106 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi | 68 +++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi | 39 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi | 39 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi | 100 +++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi | 109 +++++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi | 109 +++++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi | 41 ++++++++
48 files changed, 2575 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
new file mode 100644
index 0000000..b5b37ad
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <20 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <21 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <22 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <23 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
new file mode 100644
index 0000000..28cb8a5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <79 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
new file mode 100644
index 0000000..00fa1fd
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
+
+serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
new file mode 100644
index 0000000..5743433
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc@2e000 {
+ compatible = "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2 0 0>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
new file mode 100644
index 0000000..75854b2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
new file mode 100644
index 0000000..a1979ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+};
+
+mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
new file mode 100644
index 0000000..4c4fdde
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+};
+
+mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
new file mode 100644
index 0000000..4b8ab43
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+};
+
+mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
new file mode 100644
index 0000000..40c9137
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
+};
+
+mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
new file mode 100644
index 0000000..efe2ca0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ptp_clock@24e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0x24e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
new file mode 100644
index 0000000..1382fec
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+};
+
+ethernet@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000 0x1000>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
new file mode 100644
index 0000000..221cd2e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb1000 0x1000>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
new file mode 100644
index 0000000..61456c3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -0,0 +1,59 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mdio@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x26000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb2000 0x1000>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
new file mode 100644
index 0000000..034ab8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet0_grp2 {
+ queue-group@b4000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb4000 0x1000>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
new file mode 100644
index 0000000..3be9ba3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet1_grp2 {
+ queue-group@b5000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb5000 0x1000>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
new file mode 100644
index 0000000..02a3345
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet2_grp2 {
+ queue-group@b6000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb6000 0x1000>;
+ interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
new file mode 100644
index 0000000..72a3ef5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,pq3-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2 0 0>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
new file mode 100644
index 0000000..d1dd6fb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
new file mode 100644
index 0000000..a9bd803
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
new file mode 100644
index 0000000..8734cff
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
new file mode 100644
index 0000000..5c80460
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic";
+ device_type = "open-pic";
+};
+
+timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
new file mode 100644
index 0000000..3c28dd0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@18000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
new file mode 100644
index 0000000..eefaf28
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@19000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
new file mode 100644
index 0000000..02a5c7a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
new file mode 100644
index 0000000..bba1ba4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
new file mode 100644
index 0000000..8f0a566
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
new file mode 100644
index 0000000..c227f27
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
new file mode 100644
index 0000000..bf957a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -0,0 +1,65 @@
+/*
+ * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec4.4", "fsl,sec4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000 0x10000>;
+ interrupts = <58 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
new file mode 100644
index 0000000..185ab9d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@22000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
new file mode 100644
index 0000000..fe24cd6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <46 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
new file mode 100644
index 0000000..1aebf3e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <31 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
new file mode 100644
index 0000000..ecf5e18
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <35 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
new file mode 100644
index 0000000..66271e3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+};
+
+serial1: serial@11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
new file mode 100644
index 0000000..cf1a0ac
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial2: serial@11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+};
+
+serial3: serial@11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
new file mode 100644
index 0000000..20835ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc: sdhc@114000 {
+ compatible = "fsl,esdhc";
+ reg = <0x114000 0x1000>;
+ interrupts = <48 2 0 0>;
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
new file mode 100644
index 0000000..6db0697
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@110000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
new file mode 100644
index 0000000..cf714f5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio0: gpio@130000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
new file mode 100644
index 0000000..5f9bf7d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+};
+
+i2c@118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
new file mode 100644
index 0000000..7989bf5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+};
+
+i2c@119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
new file mode 100644
index 0000000..b9bada6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic", "chrp,open-pic";
+ device_type = "open-pic";
+ clock-frequency = <0x0>;
+};
+
+timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+msi0: msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
+
+msi1: msi@41800 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41800 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe8 0 0 0
+ 0xe9 0 0 0
+ 0xea 0 0 0
+ 0xeb 0 0 0
+ 0xec 0 0 0
+ 0xed 0 0 0
+ 0xee 0 0 0
+ 0xef 0 0 0>;
+};
+
+msi2: msi@41a00 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41a00 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xf0 0 0 0
+ 0xf1 0 0 0
+ 0xf2 0 0 0
+ 0xf3 0 0 0
+ 0xf4 0 0 0
+ 0xf5 0 0 0
+ 0xf6 0 0 0
+ 0xf7 0 0 0>;
+};
+
+timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
new file mode 100644
index 0000000..ca7fec7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <16 2 1 11>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
new file mode 100644
index 0000000..b642047
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@220000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x220000 0x1000>;
+ interrupts = <68 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
new file mode 100644
index 0000000..c573702
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@221000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x221000 0x1000>;
+ interrupts = <69 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
new file mode 100644
index 0000000..0cbbac3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
@@ -0,0 +1,100 @@
+/*
+ * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
new file mode 100644
index 0000000..3308986
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.1-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
new file mode 100644
index 0000000..7990e0d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
new file mode 100644
index 0000000..4dd6f84
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@211000 {
+ compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <45 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
new file mode 100644
index 0000000..f053835
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+ compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x2 0 0>;
+};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree
2011-11-10 16:13 ` [RFC][PATCH 07/30] powerpc/85xx: create dts components to build up an SoC Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB " Kumar Gala
2011-11-10 18:05 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC " Scott Wood
0 siblings, 2 replies; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Split the P1020 SoC device tree into what we can include as a 'prefix'
to the board device tree and what needs to be included as a 'postfix'.
This allows use more re-use and less duplication between various board
device tree configurations (32-bit address map vs 36-bit address map).
Also enable 2nd USB2 in the SoC device tree, let the board code disable
it if needed.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1020si-post.dtsi | 174 ++++++++++++
arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1020si.dtsi | 407 ---------------------------
3 files changed, 242 insertions(+), 407 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p1020si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 0000000..fc924c5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,174 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet@b2000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 0000000..6f0376e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
deleted file mode 100644
index b08c848..0000000
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * P1020si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
-
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb6000 0x1000>;
- interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- interrupts = <46 0x2 0 0>;
- phy_type = "ulpi";
- };
- */
-
- sdhci@2e000 {
- compatible = "fsl,p1020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- msi@41600 {
- compatible = "fsl,p1020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1020-guts","fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- };
-
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
-
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB device tree
2011-11-10 16:13 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 10/30] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
2011-11-10 18:05 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC " Scott Wood
1 sibling, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
We split out the common bits of the P1020RDB device tree such that we
can reuse those bits between a 32-bit or 36-bit address map device tree.
We also update the P1020RDB device tree to utilize the new p1020 SoC dts
includes (fsl/p1020si-pre.dtsi & fsl/p1020si-post.dtsi).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 232 +--------------------------------
arch/powerpc/boot/dts/p1020rdb.dtsi | 242 +++++++++++++++++++++++++++++++++++
2 files changed, 250 insertions(+), 224 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1020rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index b31e7ec..518bf99 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -9,245 +9,26 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
-
+/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB";
compatible = "fsl,P1020RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
+ board_lbc: lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- /* This location must not be altered */
- /* 256KB for Vitesse 7385 Switch firmware */
- reg = <0x0 0x00040000>;
- label = "NOR (RO) Vitesse-7385 Firmware";
- read-only;
- };
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR (RO) DTB Image";
- read-only;
- };
-
- partition@80000 {
- /* 3.5 MB for Linux Kernel Image */
- reg = <0x00080000 0x00380000>;
- label = "NOR (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@400000 {
- /* 11MB for JFFS2 based Root file System */
- reg = <0x00400000 0x00b00000>;
- label = "NOR (RW) JFFS2 Root File System";
- };
-
- partition@f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x00f00000 0x00100000>;
- label = "NOR (RO) U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1020-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x1 0x0 0x40000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND (RO) U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND (RO) DTB Image";
- read-only;
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@a00000 {
- /* 7MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00700000>;
- label = "NAND (RW) JFFS2 Root File System";
- };
-
- partition@1100000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x01100000 0x00f00000>;
- label = "NAND (RW) Writable User area";
- };
- };
-
- L2switch@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "vitesse-7385";
- reg = <0x2 0x0 0x20000>;
- };
-
};
- soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
-
- partition@u-boot {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "u-boot";
- read-only;
- };
-
- partition@dtb {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "dtb";
- read-only;
- };
-
- partition@kernel {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "kernel";
- read-only;
- };
-
- partition@fs {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "file system";
- read-only;
- };
-
- partition@jffs-fs {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "file system jffs2";
- };
- };
- };
-
- mdio@24000 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
@@ -280,3 +61,6 @@
};
};
};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
new file mode 100644
index 0000000..3738946
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -0,0 +1,242 @@
+/*
+ * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+};
+
+&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@u-boot {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@dtb {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@kernel {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "kernel";
+ read-only;
+ };
+
+ partition@fs {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "file system";
+ read-only;
+ };
+
+ partition@jffs-fs {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "file system jffs2";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+ */
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 10/30] powerpc/85xx: Add P1020RDB 36-bit address map device tree
2011-11-10 16:13 ` [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB " Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 11/30] powerpc/85xx: Rework P1010RDB and P1010 " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb_36b.dts | 66 ++++++++++++++++++++++++++++++++
1 files changed, 66 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1020rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts
new file mode 100644
index 0000000..bdbdb60
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts
@@ -0,0 +1,66 @@
+/*
+ * P1020 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1020RDB";
+ compatible = "fsl,P1020RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00020000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 11/30] powerpc/85xx: Rework P1010RDB and P1010 device tree
2011-11-10 16:13 ` [RFC][PATCH 10/30] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 12/30] powerpc/85xx: Add RTC to P1010RDB " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Moved to 4 cell interrupt nodes to deal with FSL timer and moved
interrupt-parent to root so we don't duplicate it per IP block.
During rework fixed:
* PCI interrupt map - wrong IRQs for PCI-0 controller
* SDHC interrupt sense was wrong
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 197 ++++++++++++++
arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi | 64 +++++
arch/powerpc/boot/dts/p1010rdb.dts | 228 +----------------
arch/powerpc/boot/dts/p1010rdb.dtsi | 222 ++++++++++++++++
arch/powerpc/boot/dts/p1010si.dtsi | 374 ---------------------------
5 files changed, 493 insertions(+), 592 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/p1010rdb.dtsi
delete mode 100644 arch/powerpc/boot/dts/p1010si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
new file mode 100644
index 0000000..75eb921
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -0,0 +1,197 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <16 2 0 0 19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1010-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1010-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1010-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ can0: can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2 0 0>;
+ };
+
+ can1: can@1d000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1d000 0x1000>;
+ interrupts = <61 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1010-l2-cache-controller",
+ "fsl,p1014-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: ethernet@b2000 {
+ queue-group@b2000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1010-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
new file mode 100644
index 0000000..7354a8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1010";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ can0 = &can0;
+ can1 = &can1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1010@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
index d6c669c..b868d22 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ b/arch/powerpc/boot/dts/p1010rdb.dts
@@ -9,230 +9,33 @@
* option) any later version.
*/
-/include/ "p1010si.dtsi"
+/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- can0 = &can0;
- can1 = &can1;
- };
-
memory {
device_type = "memory";
};
- ifc@ffe1e000 {
+ board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR DTB Image";
- };
-
- partition@80000 {
- /* 7 MB for Linux Kernel Image */
- reg = <0x00080000 0x00700000>;
- label = "NOR Linux Kernel Image";
- };
-
- partition@800000 {
- /* 20MB for JFFS2 based Root file System */
- reg = <0x00800000 0x01400000>;
- label = "NOR JFFS2 Root File System";
- };
-
- partition@1f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x01f00000 0x00100000>;
- label = "NOR U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,ifc-nand";
- reg = <0x1 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND Compressed RFS Image";
- };
-
- partition@a00000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00f00000>;
- label = "NAND JFFS2 Root File System";
- };
-
- partition@1900000 {
- /* 7MB for User Area */
- reg = <0x01900000 0x00700000>;
- label = "NAND User area";
- };
- };
-
- cpld@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010rdb-cpld";
- reg = <0x3 0x0 0x0000020>;
- bank-width = <1>;
- device-width = <1>;
- };
+ reg = <0x0 0xffe1e000 0 0x2000>;
};
- soc@ffe00000 {
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partition@0 {
- /* 1MB for u-boot Bootloader Image */
- /* 1MB for Environment */
- reg = <0x0 0x00100000>;
- label = "SPI Flash U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 512KB for DTB Image */
- reg = <0x00100000 0x00080000>;
- label = "SPI Flash DTB Image";
- };
-
- partition@180000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00180000 0x00400000>;
- label = "SPI Flash Linux Kernel Image";
- };
-
- partition@580000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00580000 0x00400000>;
- label = "SPI Flash Compressed RFSImage";
- };
-
- partition@980000 {
- /* 6.5MB for JFFS2 based RFS */
- reg = <0x00980000 0x00680000>;
- label = "SPI Flash JFFS2 RFS";
- };
- };
- };
-
- usb@22000 {
- phy_type = "utmi";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x0>;
- };
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x2>;
- };
- };
-
- enet0: ethernet@b0000 {
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy1>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy2>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "sgmii";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
-
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -244,24 +47,10 @@
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -272,3 +61,6 @@
};
};
};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
new file mode 100644
index 0000000..149d196
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -0,0 +1,222 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 7 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00700000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@800000 {
+ /* 20MB for JFFS2 based Root file System */
+ reg = <0x00800000 0x01400000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@1f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x01f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND User area";
+ };
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1010rdb-cpld";
+ reg = <0x3 0x0 0x0000020>;
+ bank-width = <1>;
+ device-width = <1>;
+ };
+};
+
+&board_soc {
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ /* 1MB for u-boot Bootloader Image */
+ /* 1MB for Environment */
+ reg = <0x0 0x00100000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 512KB for DTB Image */
+ reg = <0x00100000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ partition@180000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00180000 0x00400000>;
+ label = "SPI Flash Linux Kernel Image";
+ };
+
+ partition@580000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00580000 0x00400000>;
+ label = "SPI Flash Compressed RFSImage";
+ };
+
+ partition@980000 {
+ /* 6.5MB for JFFS2 based RFS */
+ reg = <0x00980000 0x00680000>;
+ label = "SPI Flash JFFS2 RFS";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "utmi";
+ dr_mode = "host";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy2: ethernet-phy@2 {
+ interrupts = <2 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy2>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi
deleted file mode 100644
index cabe0a4..0000000
--- a/arch/powerpc/boot/dts/p1010si.dtsi
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * P1010si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1010";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1010@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
- };
-
- ifc@ffe1e000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
- reg = <0x0 0xffe1e000 0 0x2000>;
- interrupts = <16 2 19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1010-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1010-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1010-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <1>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- sata@18000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can0: can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can1: can@1d000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1d000 0x1000>;
- interrupts = <61 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1010-l2-cache-controller",
- "fsl,p1014-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- dr_mode = "host";
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x26000 0x1000 0xb1030 0x4>;
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x8>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- fsl,sdhci-auto-cmd12;
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <29 2 30 2 34 2>;
- };
-
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <35 2 36 2 40 2>;
- };
-
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <31 2 32 2 33 2>;
- };
-
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1010-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1010-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 12/30] powerpc/85xx: Add RTC to P1010RDB device tree
2011-11-10 16:13 ` [RFC][PATCH 11/30] powerpc/85xx: Rework P1010RDB and P1010 " Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 13/30] powerpc/85xx: Add crypto engine to P1010 SoC " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1010rdb.dtsi | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index 149d196..3aa2b82 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -125,6 +125,13 @@
};
&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
spi@7000 {
flash@0 {
#address-cells = <1>;
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 13/30] powerpc/85xx: Add crypto engine to P1010 SoC device tree
2011-11-10 16:13 ` [RFC][PATCH 12/30] powerpc/85xx: Add RTC to P1010RDB " Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 14/30] powerpc/85xx: Add a P1010RDB 36-bit address map " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index 75eb921..bd9e163 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -161,6 +161,7 @@
fsl,sdhci-auto-cmd12;
};
+/include/ "pq3-sec4.4-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 14/30] powerpc/85xx: Add a P1010RDB 36-bit address map device tree
2011-11-10 16:13 ` [RFC][PATCH 13/30] powerpc/85xx: Add crypto engine to P1010 SoC " Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1010rdb_36b.dts | 89 ++++++++++++++++++++++++++++++++
1 files changed, 89 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1010rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb_36b.dts
new file mode 100644
index 0000000..64776f4
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB";
+ compatible = "fsl,P1010RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_ifc: ifc: ifc@fffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+ 0x1 0x0 0xf 0xff800000 0x00010000
+ 0x3 0x0 0xf 0xffb00000 0x00000020>;
+ reg = <0xf 0xffe1e000 0 0x2000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS device tree
2011-11-10 16:13 ` [RFC][PATCH 14/30] powerpc/85xx: Add a P1010RDB 36-bit address map " Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS " Kumar Gala
` (2 more replies)
0 siblings, 3 replies; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | 235 +++++++++++++++
arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1022ds.dts | 431 +--------------------------
3 files changed, 318 insertions(+), 416 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 0000000..16239b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,235 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1022-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1022-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1022-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+ dma@c300 {
+ dma00: dma-channel@0 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ dma01: dma-channel@80 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ display@10000 {
+ compatible = "fsl,diu", "fsl,p1022-diu";
+ reg = <0x10000 1000>;
+ interrupts = <64 2 0 0>;
+ };
+
+ ssi@15000 {
+ compatible = "fsl,mpc8610-ssi";
+ cell-index = <0>;
+ reg = <0x15000 0x100>;
+ interrupts = <75 2 0 0>;
+ fsl,playback-dma = <&dma00>;
+ fsl,capture-dma = <&dma01>;
+ fsl,fifo-depth = <15>;
+ };
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1022-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1022-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ power@e0070{
+ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+ reg = <0xe0070 0x20>;
+ };
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
new file mode 100644
index 0000000..e930f4f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1022";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1022@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1022@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index b9b8719..d6dd788 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -8,52 +8,17 @@
* kind, whether express or implied.
*/
-/dts-v1/;
+/include/ "fsl/p1022si-pre.dtsi"
/ {
- model = "fsl,P1022";
+ model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1022@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1022@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+ lbc: localbus@fffe05000 {
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
-
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
@@ -161,51 +126,10 @@
};
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1022-immr", "simple-bus";
+ soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1022-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1022-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
-
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
@@ -216,41 +140,14 @@
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -274,115 +171,20 @@
};
ssi@15000 {
- compatible = "fsl,mpc8610-ssi";
- cell-index = <0>;
- reg = <0x15000 0x100>;
- interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
- fsl,playback-dma = <&dma00>;
- fsl,capture-dma = <&dma01>;
- fsl,fifo-depth = <15>;
fsl,ssi-asynchronous;
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma00: dma-channel@0 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma01: dma-channel@80 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1022-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
+ usb@23000 {
+ status = "disabled";
+ };
+ mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
@@ -393,187 +195,22 @@
};
};
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- };
-
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- fsl,wake-on-filer;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1022-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- fsl,sdhci-auto-cmd12;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- sata@18000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2 0 0>;
- };
-
- sata@19000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2 0 0>;
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
- reg = <0xe0070 0x20>;
- };
-
- display@10000 {
- compatible = "fsl,diu", "fsl,p1022-diu";
- reg = <0x10000 1000>;
- interrupts = <64 2 0 0>;
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1022-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1022-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
};
pci0: pcie@fffe09000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -585,30 +222,11 @@
};
pci1: pcie@fffe0a000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -619,32 +237,11 @@
};
};
-
pci2: pcie@fffe0b000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -655,3 +252,5 @@
};
};
};
+
+/include/ "fsl/p1022si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS device tree
2011-11-10 16:13 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Kumar Gala
@ 2011-11-10 16:13 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 17/30] powerpc/85xx: Rework P2020RDB " Kumar Gala
2011-11-10 17:30 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
2011-11-15 23:49 ` Tabi Timur-B04825
2 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p2020si-post.dtsi | 194 +++++++++++++++
arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi | 69 ++++++
arch/powerpc/boot/dts/p2020ds.dts | 353 ++-------------------------
arch/powerpc/boot/dts/p2020ds.dtsi | 316 ++++++++++++++++++++++++
arch/powerpc/boot/dts/p2020si.dtsi | 99 +++-----
5 files changed, 634 insertions(+), 397 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/p2020ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
new file mode 100644
index 0000000..c041050
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
@@ -0,0 +1,194 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x8000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
+ };
+
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
new file mode 100644
index 0000000..3213288
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
@@ -0,0 +1,69 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index 66f03d6..237310c 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -9,30 +9,17 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020DS";
compatible = "fsl,P2020DS";
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- compatible = "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
@@ -40,203 +27,18 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
- reg = <0x3 0x0 0x30>;
- };
-
- nand@4,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
+ reg = <0 0xffe05000 0 0x1000>;
};
- soc@ffe00000 {
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x2>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
-
- };
-
- mdio@25520 {
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
-
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xCCCCCCCD>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x0001869B>;
- fsl,max-adj = <249999999>;
- };
-
- enet0: ethernet@24000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@25000 {
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet2: ethernet@26000 {
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
- };
-
-
- msi@41600 {
- compatible = "fsl,mpic-msi";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
- pci0: pcie@ffe08000 {
+ pci2: pcie@ffe08000 {
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x8 0x1
- 0000 0x0 0x0 0x2 &mpic 0x9 0x1
- 0000 0x0 0x0 0x3 &mpic 0xa 0x1
- 0000 0x0 0x0 0x4 &mpic 0xb 0x1
- >;
+ reg = <0 0xffe08000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -247,61 +49,11 @@
};
};
- pci1: pcie@ffe09000 {
+ board_pci1: pci1: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
-
- // IDSEL 0x11 func 0 - PCI slot 1
- 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 1 - PCI slot 1
- 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 2 - PCI slot 1
- 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 3 - PCI slot 1
- 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 4 - PCI slot 1
- 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 5 - PCI slot 1
- 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 6 - PCI slot 1
- 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 7 - PCI slot 1
- 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -309,89 +61,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <4 1>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
- pci2: pcie@ffe0a000 {
+ pci0: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0 0xffe0a000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -402,3 +79,11 @@
};
};
};
+
+/*
+ * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi
new file mode 100644
index 0000000..c1cf6ce
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dtsi
@@ -0,0 +1,316 @@
+/*
+ * P2020DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <0x3 0x0 0x30>;
+ };
+
+ nand@4,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <3 1 0 0>;
+ reg = <0x2>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xCCCCCCCD>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x0001869B>;
+ fsl,max-adj = <249999999>;
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+};
+
+&board_pci1 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ // IDSEL 0x11 func 0 - PCI slot 1
+ 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 1 - PCI slot 1
+ 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 2 - PCI slot 1
+ 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 3 - PCI slot 1
+ 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 4 - PCI slot 1
+ 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 5 - PCI slot 1
+ 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 6 - PCI slot 1
+ 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 7 - PCI slot 1
+ 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <4 1 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
index 6def17f..37f7194 100644
--- a/arch/powerpc/boot/dts/p2020si.dtsi
+++ b/arch/powerpc/boot/dts/p2020si.dtsi
@@ -14,6 +14,7 @@
compatible = "fsl,P2020";
#address-cells = <2>;
#size-cells = <2>;
+ interrupt-parent = <&mpic>;
cpus {
#address-cells = <1>;
@@ -37,8 +38,7 @@
#size-cells = <1>;
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
};
soc@ffe00000 {
@@ -58,15 +58,13 @@
ecm@1000 {
compatible = "fsl,p2020-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p2020-memory-controller";
reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <18 2 0 0>;
};
i2c@3000 {
@@ -75,8 +73,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -86,8 +83,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -97,8 +93,7 @@
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -107,8 +102,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
spi@7000 {
@@ -117,8 +111,7 @@
#size-cells = <0>;
compatible = "fsl,espi";
reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <59 0x2 0 0>;
mode = "cpu";
};
@@ -133,29 +126,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
+ interrupts = <76 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
+ interrupts = <77 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
+ interrupts = <78 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
+ interrupts = <79 2 0 0>;
};
};
@@ -163,8 +152,7 @@
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <47 0x2 0 0>;
gpio-controller;
};
@@ -173,8 +161,7 @@
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
dma@21300 {
@@ -188,29 +175,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -219,8 +202,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
+ interrupts = <28 0x2 0 0>;
};
mdio@24520 {
@@ -254,8 +236,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
enet1: ethernet@25000 {
@@ -268,8 +249,7 @@
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
@@ -283,16 +263,14 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
};
sdhci@2e000 {
compatible = "fsl,p2020-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <72 0x2 0 0>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
@@ -301,8 +279,7 @@
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <45 2 0 0 58 2 0 0>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xbfe>;
@@ -323,15 +300,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 { //global utilities block
@@ -350,8 +326,7 @@
reg = <0 0xffe08000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
+ interrupts = <24 2 0 0>;
};
pci1: pcie@ffe09000 {
@@ -363,8 +338,7 @@
reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ interrupts = <25 2 0 0>;
};
pci2: pcie@ffe0a000 {
@@ -376,7 +350,6 @@
reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupts = <26 2 0 0>;
};
};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 17/30] powerpc/85xx: Rework P2020RDB device tree
2011-11-10 16:13 ` [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 18/30] powerpc/85xx: Rework P1021MDS " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p2020rdb.dts | 63 ++---
arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 141 +----------
arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 107 +--------
arch/powerpc/boot/dts/p2020si.dtsi | 355 -------------------------
4 files changed, 22 insertions(+), 644 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/p2020si.dtsi
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 1d7a05f..fd42712 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -9,7 +9,7 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
@@ -29,7 +29,8 @@
device_type = "memory";
};
- localbus@ffe05000 {
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -140,7 +141,9 @@
};
- soc@ffe00000 {
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
@@ -148,17 +151,13 @@
};
};
- spi@7000 {
-
- fsl_m25p80@0 {
+ spi@7000 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
spi-max-frequency = <50000000>;
- mode = <0>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
@@ -202,13 +201,11 @@
mdio@24520 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x1>;
};
};
@@ -224,11 +221,7 @@
status = "disabled";
};
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
+ ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xCCCCCCCD>;
@@ -252,29 +245,18 @@
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
-
};
pci0: pcie@ffe08000 {
+ reg = <0 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
+ pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -286,21 +268,10 @@
};
pci2: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -311,3 +282,5 @@
};
};
};
+
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index fc8dddd..66aac86 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -14,28 +14,16 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- pci0 = &pci0;
- };
-
cpus {
PowerPC,P2020@1 {
- status = "disabled";
+ status = "disabled";
};
-
- };
-
- memory {
- device_type = "memory";
};
localbus@ffe05000 {
@@ -43,115 +31,18 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
-
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
dma@c300 {
status = "disabled";
};
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25520 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- status = "disabled";
- };
-
enet0: ethernet@24000 {
status = "disabled";
};
- enet1: ethernet@25000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@26000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
-
mpic: pic@40000 {
protected-sources = <
42 76 77 78 79 /* serial1 , dma2 */
@@ -164,40 +55,12 @@
msi@41600 {
status = "disabled";
};
-
-
};
pci0: pcie@ffe08000 {
status = "disabled";
};
- pci1: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
pci2: pcie@ffe0a000 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index 261c34b..9bd8ef4 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -15,28 +15,18 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet0 = &enet0;
- serial0 = &serial1;
- pci1 = &pci1;
- };
-
cpus {
PowerPC,P2020@0 {
- status = "disabled";
+ status = "disabled";
};
};
- memory {
- device_type = "memory";
- };
-
localbus@ffe05000 {
status = "disabled";
};
@@ -70,55 +60,10 @@
status = "disabled";
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
gpio: gpio-controller@f000 {
status = "disabled";
};
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- };
-
dma@21300 {
status = "disabled";
};
@@ -139,12 +84,6 @@
status = "disabled";
};
- enet0: ethernet@24000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@25000 {
status = "disabled";
};
@@ -170,22 +109,6 @@
>;
};
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
global-utilities@e0000 { //global utilities block
status = "disabled";
};
@@ -199,30 +122,4 @@
pci1: pcie@ffe09000 {
status = "disabled";
};
-
- pci2: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
};
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
deleted file mode 100644
index 37f7194..0000000
--- a/arch/powerpc/boot/dts/p2020si.dtsi
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * P2020 Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P2020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P2020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p2020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p2020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <18 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- mode = "cpu";
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
-
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
-
- };
-
- sdhci@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <24 2 0 0>;
- };
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <25 2 0 0>;
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <26 2 0 0>;
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 18/30] powerpc/85xx: Rework P1021MDS device tree
2011-11-10 16:14 ` [RFC][PATCH 17/30] powerpc/85xx: Rework P2020RDB " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 19/30] powerpc/85xx: Rework MPC8572DS " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1021si-post.dtsi | 225 ++++++++++++++
arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1021mds.dts | 421 ++-------------------------
3 files changed, 314 insertions(+), 400 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
new file mode 100644
index 0000000..38ba54d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -0,0 +1,225 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1021-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1021-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1021-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1021-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet@b2000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1021-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ compatible = "fsl,ucc-mdio";
+ };
+
+ ucc@2400 {
+ cell-index = <5>;
+ reg = <0x2400 0x200>;
+ interrupts = <40>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
new file mode 100644
index 0000000..4abd54b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1021";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1021@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1021@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index ad5b852..b1bef1f 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -9,53 +9,22 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet4 = &enet4;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1021@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1021@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
};
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ lbc: localbus@ffe05000 {
+ reg = <0x0 0xffe05000 0x0 0x1000>;
/* NAND Flash, BCSR, PMC0/1*/
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
@@ -138,99 +107,26 @@
};
};
- soc@ffe00000 {
-
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
+ soc: soc@ffe00000 {
compatible = "fsl,p1021-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1021-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1021-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@u-boot {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -253,237 +149,45 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1021-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
+ mdio@24000 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
};
phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
reg = <0x4>;
};
};
mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b1000 {
phy-handle = <&phy4>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
- };
};
- enet2: ethernet@B2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1021-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1",
- "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1021-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1021-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
par_io@e0100 {
@@ -499,8 +203,7 @@
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
- 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
-*/
+ 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
@@ -535,31 +238,10 @@
};
pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -571,31 +253,10 @@
};
pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -606,36 +267,16 @@
};
};
- qe@ffe80000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
+ qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
- fsl,qe-num-riscs = <1>;
- fsl,qe-num-snums = <28>;
status = "disabled"; /* no firmware loaded */
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- interrupts = <63 2 60 2>; //high:47 low:44
- interrupt-parent = <&mpic>;
- };
-
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk12";
tx-clock-name = "clk9";
@@ -645,20 +286,15 @@
};
mdio@2120 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x2120 0x18>;
- compatible = "fsl,ucc-mdio";
-
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <4 1>;
+ interrupts = <4 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <5 1>;
+ interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
@@ -671,10 +307,6 @@
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <5>;
- reg = <0x2400 0x200>;
- interrupts = <40>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk13";
@@ -682,18 +314,7 @@
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x6000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x6000>;
- };
- };
};
};
+
+/include/ "fsl/p1021si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 19/30] powerpc/85xx: Rework MPC8572DS device tree
2011-11-10 16:14 ` [RFC][PATCH 18/30] powerpc/85xx: Rework P1021MDS " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 20/30] powerpc/85xx: Rework MPC8536DS device trees Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi | 196 ++++++
arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi | 70 +++
arch/powerpc/boot/dts/mpc8572ds.dts | 757 +-----------------------
arch/powerpc/boot/dts/mpc8572ds.dtsi | 397 +++++++++++++
arch/powerpc/boot/dts/mpc8572ds_36b.dts | 746 +-----------------------
arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts | 487 +--------------
arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts | 245 +++------
7 files changed, 788 insertions(+), 2110 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/mpc8572ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
new file mode 100644
index 0000000..d44e25a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -0,0 +1,196 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8572-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x100000>; // L2,1M
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
new file mode 100644
index 0000000..ca18832
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
@@ -0,0 +1,70 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8572";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index f6c04d2..0c9f295 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
@@ -78,601 +29,17 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@ffe00000 {
ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2 71 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xAAAAAAAB>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x3B9AC9FB>;
- fsl,max-adj = <499999999>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -680,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -784,31 +66,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -819,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi
new file mode 100644
index 0000000..c3d4fac
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi
@@ -0,0 +1,397 @@
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xAAAAAAAB>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x3B9AC9FB>;
+ fsl,max-adj = <499999999>;
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci0 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index f6365db..6c3d0b3 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8572 DS Device Tree Source
+ * MPC8572DS Device Tree Source (36-bit address map)
*
* Copyright 2007-2009 Freescale Semiconductor Inc.
*
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
@@ -78,588 +29,17 @@
0x4 0x0 0xf 0xffa40000 0x00040000
0x5 0x0 0xf 0xffa80000 0x00040000
0x6 0x0 0xf 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@fffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -667,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -771,31 +66,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -806,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 3375c2a..d34d127 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -14,494 +14,69 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- pci0 = &pci0;
- pci1 = &pci1;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
-
+ PowerPC,8572@1 {
+ status = "disabled";
+ };
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
+ serial@4600 {
+ status = "disabled";
};
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ dma@c300 {
+ status = "disabled";
};
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ gpio-controller@f000 {
};
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
+ l2-cache-controller@20000 {
cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
};
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ ethernet@26000 {
+ status = "disabled";
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ mdio@26520 {
+ status = "disabled";
};
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
+ ethernet@27000 {
+ status = "disabled";
};
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- };
+ mdio@27520 {
+ status = "disabled";
};
-
- enet1: ethernet@25000 {
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
+ pic@40000 {
+ protected-sources = <
+ 31 32 33 37 38 39 /* enet2 enet3 */
+ 76 77 78 79 26 42 /* dma2 pci2 serial*/
+ 0xe4 0xe5 0xe6 0xe7 /* msi */
+ >;
};
msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
msi-available-ranges = <0 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- protected-sources = <
- 31 32 33 37 38 39 /* enet2 enet3 */
- 76 77 78 79 26 42 /* dma2 pci2 serial*/
- 0xe4 0xe5 0xe6 0xe7 /* msi */
- >;
};
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe08000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
+ timer@42100 {
+ status = "disabled";
};
-
};
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe09000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- };
+ pcie@ffe0a000 {
+ status = "disabled";
};
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index e7b477f..d6a8faf 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -15,169 +15,74 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- pci2 = &pci2;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
+ PowerPC,8572@0 {
+ status = "disabled";
+ };
PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
+ ecm-law@0 {
+ status = "disabled";
};
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
+ ecm@1000 {
+ status = "disabled";
+ };
+ memory-controller@2000 {
+ status = "disabled";
+ };
+ memory-controller@6000 {
+ status = "disabled";
+ };
+ i2c@3000 {
+ status = "disabled";
+ };
+ i2c@3100 {
+ status = "disabled";
+ };
+ serial@4500 {
+ status = "disabled";
+ };
+ gpio-controller@f000 {
+ status = "disabled";
+ };
+ l2-cache-controller@20000 {
+ cache-size = <0x80000>; // L2, 512K
+ };
+ dma@21300 {
+ status = "disabled";
+ };
+ ethernet@24000 {
+ status = "disabled";
};
-
mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- reg = <0x3>;
- };
+ status = "disabled";
};
-
- enet2: ethernet@26000 {
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
+ ptp_clock@24e00 {
+ status = "disabled";
};
-
- enet3: ethernet@27000 {
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
+ ethernet@25000 {
+ status = "disabled";
};
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0x80 0x80>;
- interrupts = <
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ mdio@25520 {
+ status = "disabled";
};
-
- serial0: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ crypto@30000 {
+ status = "disabled";
};
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ pic@40000 {
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
@@ -189,41 +94,25 @@
0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe0a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
+ timer@41100 {
+ status = "disabled";
};
+ msi@41600 {
+ msi-available-ranges = <0x80 0x80>;
+ interrupts = <
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ };
+ global-utilities@e0000 {
+ status = "disabled";
+ };
+ };
+ pcie@ffe08000 {
+ status = "disabled";
+ };
+ pcie@ffe09000 {
+ status = "disabled";
};
};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 20/30] powerpc/85xx: Rework MPC8536DS device trees
2011-11-10 16:14 ` [RFC][PATCH 19/30] powerpc/85xx: Rework MPC8572DS " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 21/30] powerpc/85xx: Rework MPC8544DS device tree Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi | 248 ++++++++++++++
arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi | 63 ++++
arch/powerpc/boot/dts/mpc8536ds.dts | 456 +------------------------
arch/powerpc/boot/dts/mpc8536ds.dtsi | 141 ++++++++
arch/powerpc/boot/dts/mpc8536ds_36b.dts | 410 ++---------------------
5 files changed, 489 insertions(+), 829 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/mpc8536ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
new file mode 100644
index 0000000..8365be6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -0,0 +1,248 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8536-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8536-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ /* mark compat w/8572 to get some erratum treatment */
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2 0 0>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8536-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ usb@22000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+ };
+
+ usb@23000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <46 0x2 0 0>;
+ };
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+ usb@2b000 {
+ compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+ reg = <0x2b000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <60 0x2 0 0>;
+ };
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8536-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
new file mode 100644
index 0000000..7de45a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8536";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8536@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index a75c10e..c158815 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -9,24 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
cpus {
#cpus = <1>;
@@ -45,403 +32,34 @@
reg = <0 0 0 0>; // Filled by U-Boot
};
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8536-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8536-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8536-l2-cache-controller";
- reg = <0x20000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0 0x1>;
- interrupt-parent = <&mpic>;
- };
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <4>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>;
- partition@u-boot {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@kernel {
- label = "kernel";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@dtb {
- label = "dtb";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@fs {
- label = "file system";
- reg = <0x00700000 0x00900000>;
- };
- };
- flash@1 {
- compatible = "spansion,s25sl12801";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
- flash@2 {
- compatible = "spansion,s25sl12801";
- reg = <2>;
- spi-max-frequency = <40000000>;
- };
- flash@3 {
- compatible = "spansion,s25sl12801";
- reg = <3>;
- spi-max-frequency = <40000000>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- phy_type = "ulpi";
- };
-
- usb@23000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- usb@2b000 {
- compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
- reg = <0x2b000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <60 0x2>;
- dr_mode = "peripheral";
- phy_type = "ulpi";
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <250000000>;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0 0xffe00000 0x100000>;
};
pci0: pci@ffe08000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xffe08000 0 0x1000>;
+ ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+ 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0 0 1 &mpic 1 1
- 0x8800 0 0 2 &mpic 2 1
- 0x8800 0 0 3 &mpic 3 1
- 0x8800 0 0 4 &mpic 4 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 0x2>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
- 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
+ 0x8800 0 0 1 &mpic 1 1 0 0
+ 0x8800 0 0 2 &mpic 2 1 0 0
+ 0x8800 0 0 3 &mpic 3 1 0 0
+ 0x8800 0 0 4 &mpic 4 1 0 0>;
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0x98000000
0x02000000 0 0x98000000
0 0x08000000
@@ -453,31 +71,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0x90000000
0x02000000 0 0x90000000
0 0x08000000
@@ -489,32 +86,10 @@
};
pci3: pcie@ffe0b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0b000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
-
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xa0000000
0x02000000 0 0xa0000000
0 0x20000000
@@ -525,3 +100,6 @@
};
};
};
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
new file mode 100644
index 0000000..1462e4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -0,0 +1,141 @@
+/*
+ * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ i2c@3100 {
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0 0x1 0 0>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ flash@1 {
+ compatible = "spansion,s25sl12801";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@2 {
+ compatible = "spansion,s25sl12801";
+ reg = <2>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@3 {
+ compatible = "spansion,s25sl12801";
+ reg = <3>;
+ spi-max-frequency = <40000000>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 0x1 0 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 0x1 0 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ usb@2b000 {
+ dr_mode = "peripheral";
+ phy_type = "ulpi";
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index d95b260..8f4b929 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8536 DS Device Tree Source
+ * MPC8536DS Device Tree Source (36-bit address map)
*
* Copyright 2008-2009 Freescale Semiconductor, Inc.
*
@@ -9,24 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
cpus {
#cpus = <1>;
@@ -45,351 +32,34 @@
reg = <0 0 0 0>; // Filled by U-Boot
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8536-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8536-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8536-l2-cache-controller";
- reg = <0x20000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0 0x1>;
- interrupt-parent = <&mpic>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- phy_type = "ulpi";
- };
-
- usb@23000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- usb@2b000 {
- compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
- reg = <0x2b000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <60 0x2>;
- dr_mode = "peripheral";
- phy_type = "ulpi";
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <250000000>;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
};
- pci0: pci@fffe08000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ pci0: pci@ffe08000 {
+ reg = <0xf 0xffe08000 0 0x1000>;
+ ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0 0 1 &mpic 1 1
- 0x8800 0 0 2 &mpic 2 1
- 0x8800 0 0 3 &mpic 3 1
- 0x8800 0 0 4 &mpic 4 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 0x2>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
- 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf 0xffe08000 0 0x1000>;
+ 0x8800 0 0 1 &mpic 1 1 0 0
+ 0x8800 0 0 2 &mpic 2 1 0 0
+ 0x8800 0 0 3 &mpic 3 1 0 0
+ 0x8800 0 0 4 &mpic 4 1 0 0>;
};
- pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ pci1: pcie@ffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xf8000000
0x02000000 0 0xf8000000
0 0x08000000
@@ -401,31 +71,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xf8000000
0x02000000 0 0xf8000000
0 0x08000000
@@ -437,32 +86,10 @@
};
pci3: pcie@fffe0b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
-
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
@@ -473,3 +100,6 @@
};
};
};
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 21/30] powerpc/85xx: Rework MPC8544DS device tree
2011-11-10 16:14 ` [RFC][PATCH 20/30] powerpc/85xx: Rework MPC8536DS device trees Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 22/30] powerpc/85xx: Rework MPC8548CDS device trees Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi | 191 ++++++++++
arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi | 63 ++++
arch/powerpc/boot/dts/mpc8544ds.dts | 473 ++-----------------------
arch/powerpc/boot/dts/mpc8544ds.dtsi | 161 +++++++++
4 files changed, 453 insertions(+), 435 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/mpc8544ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
new file mode 100644
index 0000000..f73ba4e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
@@ -0,0 +1,191 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8544-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8544-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8544-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8544-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
new file mode 100644
index 0000000..8777f92
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8544";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8544@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index d793968..e934987 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -9,339 +9,52 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8544si-pre.dtsi"
+
/ {
model = "MPC8544DS";
compatible = "MPC8544DS", "MPC85xxDS";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8544@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ reg = <0 0 0 0>; // Filled by U-Boot
};
- soc8544@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
-
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8544-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8544-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8544-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc8544@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
};
pci0: pci@e0008000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x12 J16 Slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
};
pci1: pcie@e0009000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0x0 0xe0009000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -353,31 +66,10 @@
};
pci2: pcie@e000a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -388,44 +80,11 @@
};
};
- pci3: pcie@e000b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000b000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
- 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
- interrupt-map = <
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ board_pci3: pci3: pcie@e000b000 {
+ reg = <0x0 0xe000b000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
+ 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xb0000000
0x2000000 0x0 0xb0000000
0x0 0x100000
@@ -433,70 +92,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
-
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xb0000000
- 0x2000000 0x0 0xb0000000
- 0x0 0x100000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0
- 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent = <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
};
};
+
+/*
+ * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
new file mode 100644
index 0000000..270f64b
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi
@@ -0,0 +1,161 @@
+/*
+ * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ enet0: ethernet@24000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci3 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 22/30] powerpc/85xx: Rework MPC8548CDS device trees
2011-11-10 16:14 ` [RFC][PATCH 21/30] powerpc/85xx: Rework MPC8544DS device tree Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 23/30] powerpc/85xx: Rework P4080DS " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi | 143 +++++++
arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi | 62 +++
arch/powerpc/boot/dts/mpc8548cds.dts | 505 ++++++-------------------
3 files changed, 327 insertions(+), 383 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
new file mode 100644
index 0000000..9d8023a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
@@ -0,0 +1,143 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <25 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8548-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8548-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8548-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
new file mode 100644
index 0000000..289f121
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -0,0 +1,62 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8548";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index a17a557..07b8dae 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -9,13 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
ethernet0 = &enet0;
@@ -29,76 +27,19 @@
pci2 = &pci2;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8548@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // 166 MHz
- clock-frequency = <0>; // 825 MHz, from uboot
- next-level-cache = <&L2>;
- };
- };
-
memory {
device_type = "memory";
- reg = <0x0 0x8000000>; // 128M at 0x0
+ reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
- soc8548@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8548-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8548-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8548-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ soc: soc8548@e0000000 {
+ ranges = <0 0x0 0xe0000000 0x100000>;
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
@@ -116,351 +57,178 @@
};
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <5 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <5 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
};
- global-utilities@e0000 { //global utilities reg
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
};
pci0: pci@e0008000 {
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
- 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
- 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
- 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
- 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
- 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
- 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
- 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
- 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
@@ -492,7 +260,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <0 1>;
+ interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
@@ -505,56 +273,25 @@
};
pci1: pci@e0009000 {
+ reg = <0 0xe0009000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
- clock-frequency = <33333333>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
+ reg = <0 0xe000a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -565,3 +302,5 @@
};
};
};
+
+/include/ "fsl/mpc8548si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 23/30] powerpc/85xx: Rework P4080DS device trees
2011-11-10 16:14 ` [RFC][PATCH 22/30] powerpc/85xx: Rework MPC8548CDS device trees Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 24/30] powerpc/85xx: Rework P5020DS device tree Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 342 ++++++++++++
arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 145 +++++
arch/powerpc/boot/dts/p4080ds.dts | 14 +-
arch/powerpc/boot/dts/p4080si.dtsi | 755 ---------------------------
4 files changed, 498 insertions(+), 758 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p4080si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
new file mode 100644
index 0000000..1510991
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -0,0 +1,342 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&rio {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ interrupts = <
+ 16 2 1 11 /* err_irq */
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0 /* bell_inb_irq */
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0 /* msg1_rx_irq */
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>; /* msg2_rx_irq */
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p4080-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ voltage-ranges = <3300 3300>;
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
new file mode 100644
index 0000000..b353ac9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -0,0 +1,145 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P4080";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+
+ rio0 = &rapidio0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index c7916dc..8ea1ae9 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p4080si.dtsi"
+/include/ "fsl/p4080si-pre.dtsi"
/ {
model = "fsl,P4080DS";
@@ -50,6 +50,9 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -105,12 +108,12 @@
};
};
- rapidio0: rapidio@ffe0c0000 {
+ rio: rapidio0: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x20000>;
ranges = <0 0 0xc 0x20000000 0 0x01000000>;
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
3 0 0xf 0xffdf0000 0x00008000>;
@@ -132,6 +135,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -147,6 +151,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -162,6 +167,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -174,3 +180,5 @@
};
};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi
deleted file mode 100644
index f20c01a..0000000
--- a/arch/powerpc/boot/dts/p4080si.dtsi
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * P4080 Silicon Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P4080";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
- rio0 = &rapidio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p4080-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p4080-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p4080-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- voltage-ranges = <3300 3300>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p4080-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p4080-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio0: rapidio@ffe0c0000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- interrupts = <
- 16 2 1 11 /* err_irq */
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0 /* bell_inb_irq */
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0 /* msg1_rx_irq */
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>; /* msg2_rx_irq */
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 24/30] powerpc/85xx: Rework P5020DS device tree
2011-11-10 16:14 ` [RFC][PATCH 23/30] powerpc/85xx: Rework P4080DS " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 25/30] powerpc/85xx: Rework P3041DS " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 335 +++++++++++++
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 96 ++++
arch/powerpc/boot/dts/p5020ds.dts | 13 +-
arch/powerpc/boot/dts/p5020si.dtsi | 716 ---------------------------
4 files changed, 441 insertions(+), 719 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p5020si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
new file mode 100644
index 0000000..7135c67
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -0,0 +1,335 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p5020-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
new file mode 100644
index 0000000..ae823a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -0,0 +1,96 @@
+/*
+ * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P5020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e5500@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e5500@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index e6d4099..ceee4f5 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p5020si.dtsi"
+/include/ "fsl/p5020si-pre.dtsi"
/ {
model = "fsl,P5020DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,7 +162,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -176,6 +178,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -191,6 +194,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -206,6 +210,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -217,3 +222,5 @@
};
};
};
+
+/include/ "fsl/p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
deleted file mode 100644
index e7948ad..0000000
--- a/arch/powerpc/boot/dts/p5020si.dtsi
+++ /dev/null
@@ -1,716 +0,0 @@
-/*
- * P5020 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P5020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e5500@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e5500@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p5020-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p5020-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p5020-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p5020-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 25/30] powerpc/85xx: Rework P3041DS device tree
2011-11-10 16:14 ` [RFC][PATCH 24/30] powerpc/85xx: Rework P5020DS device tree Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 26/30] powerpc/85xx: Rework P2041RDB " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 332 ++++++++++++
arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 112 ++++
arch/powerpc/boot/dts/p3041ds.dts | 12 +-
arch/powerpc/boot/dts/p3041si.dtsi | 729 ---------------------------
4 files changed, 454 insertions(+), 731 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p3041si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
new file mode 100644
index 0000000..9cda481
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -0,0 +1,332 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
new file mode 100644
index 0000000..136def3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -0,0 +1,112 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index bbd113b..1053d69 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3041si.dtsi"
+/include/ "fsl/p3041si-pre.dtsi"
/ {
model = "fsl,P3041DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,6 +162,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -175,6 +178,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -190,6 +194,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -205,6 +210,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -216,3 +222,5 @@
};
};
};
+
+/include/ "fsl/p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi
deleted file mode 100644
index 87130b7..0000000
--- a/arch/powerpc/boot/dts/p3041si.dtsi
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * P3041 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p3041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 26/30] powerpc/85xx: Rework P2041RDB device tree
2011-11-10 16:14 ` [RFC][PATCH 25/30] powerpc/85xx: Rework P3041DS " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 27/30] powerpc/85xx: Rework P3060QDS " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 332 +++++++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 112 +++++++++
arch/powerpc/boot/dts/p2041rdb.dts | 28 ++-
3 files changed, 470 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
new file mode 100644
index 0000000..c653465
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -0,0 +1,332 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p2041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
new file mode 100644
index 0000000..56fa0a1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -0,0 +1,112 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 79b6895..c4efefd 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p2041si.dtsi"
+/include/ "fsl/p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -106,7 +108,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
@@ -122,6 +124,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -137,6 +140,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -152,6 +156,24 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci3: pcie@ffe203000 {
+ status = "disabled";
+ reg = <0xf 0xfe203000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -163,3 +185,5 @@
};
};
};
+
+/include/ "fsl/p2041si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 27/30] powerpc/85xx: Rework P3060QDS device tree
2011-11-10 16:14 ` [RFC][PATCH 26/30] powerpc/85xx: Rework P2041RDB " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p3060si-post.dtsi | 296 +++++++++++
arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi | 125 +++++
arch/powerpc/boot/dts/p3060qds.dts | 12 +-
arch/powerpc/boot/dts/p3060si.dtsi | 719 ---------------------------
4 files changed, 430 insertions(+), 722 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p3060si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
new file mode 100644
index 0000000..a63edd1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
@@ -0,0 +1,296 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3060-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3060-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.1-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
new file mode 100644
index 0000000..00c8e70
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
@@ -0,0 +1,125 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3060";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
index 08b9193..529042e 100644
--- a/arch/powerpc/boot/dts/p3060qds.dts
+++ b/arch/powerpc/boot/dts/p3060qds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3060si.dtsi"
+/include/ "fsl/p3060si-pre.dtsi"
/ {
model = "fsl,P3060QDS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -138,7 +140,7 @@
};
};
- rapidio@ffe0c0000 {
+ rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
@@ -149,7 +151,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -210,6 +212,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -225,6 +228,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -236,3 +240,5 @@
};
};
};
+
+/include/ "fsl/p3060si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
deleted file mode 100644
index 68947e1..0000000
--- a/arch/powerpc/boot/dts/p3060si.dtsi
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * P3060 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3060";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3060-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- rmu: rmu@d3000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,srio-rmu";
- reg = <0xd3000 0x500>;
- ranges = <0x0 0xd3000 0x500>;
-
- message-unit@0 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x0 0x100>;
- interrupts = <
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0>;/* msg1_rx_irq */
- };
- message-unit@100 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x100 0x100>;
- interrupts = <
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>;/* msg2_rx_irq */
- };
- doorbell-unit@400 {
- compatible = "fsl,srio-dbell-unit";
- reg = <0x400 0x80>;
- interrupts = <
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0>;/* bell_inb_irq */
- };
- port-write-unit@4e0 {
- compatible = "fsl,srio-port-write-unit";
- reg = <0x4e0 0x20>;
- interrupts = <16 2 1 11>;
- };
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3060-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3060-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3060-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio@ffe0c0000 {
- compatible = "fsl,srio";
- interrupts = <16 2 1 11>;
- #address-cells = <2>;
- #size-cells = <2>;
- fsl,srio-rmu-handle = <&rmu>;
- ranges;
-
- port1 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <1>;
- };
-
- port2 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <2>;
- };
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS device tree
2011-11-10 16:14 ` [RFC][PATCH 27/30] powerpc/85xx: Rework P3060QDS " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 29/30] powerpc/85xx: Rework MPC8568MDS " Kumar Gala
2011-11-10 18:10 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Scott Wood
0 siblings, 2 replies; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1023si-post.dtsi | 248 ++++++++++++++++++
arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi | 76 ++++++
arch/powerpc/boot/dts/p1023rds.dts | 372 +--------------------------
3 files changed, 330 insertions(+), 366 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
new file mode 100644
index 0000000..b29330c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -0,0 +1,248 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 0 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 4 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 8 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1023-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1023-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1023-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1023-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+ crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000 0x10000>;
+ ranges = <0 0x30000 0x10000>;
+ interrupts = <58 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <57 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <57 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1023-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
new file mode 100644
index 0000000..ac45f6d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
@@ -0,0 +1,76 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1023";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1023@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1023@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
index d9b7767..b85b7c3 100644
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ b/arch/powerpc/boot/dts/p1023rds.dts
@@ -34,137 +34,30 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/dts-v1/;
+/include/ "fsl/p1023si-pre.dtsi"
/ {
model = "fsl,P1023";
compatible = "fsl,P1023RDS";
#address-cells = <2>;
#size-cells = <2>;
-
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,P1023@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- cpu1: PowerPC,P1023@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
+ interrupt-parent = <&mpic>;
memory {
device_type = "memory";
};
- soc@ff600000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1023-immr", "simple-bus";
+ soc: soc@ff600000 {
ranges = <0x0 0x0 0xff600000 0x200000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1023-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1023-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p1023-espi", "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <4>;
-
fsl_dataflash@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -186,197 +79,14 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,qoriq-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1023-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
dr_mode = "host";
phy_type = "ulpi";
};
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30000 0x10000>;
- ranges = <0 0x30000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <58 2>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <45 2>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <45 2>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <57 2>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <57 2>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",
- "fsl,p1022-pmc";
- reg = <0xe0070 0x20>;
- etsec1_clk: soc-clk@B0{
- fsl,pmcdr-mask = <0x00000080>;
- };
- etsec2_clk: soc-clk@B1{
- fsl,pmcdr-mask = <0x00000040>;
- };
- etsec3_clk: soc-clk@B2{
- fsl,pmcdr-mask = <0x00000020>;
- };
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1023-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1023-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
};
- localbus@ff605000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+ lbc: localbus@ff605000 {
reg = <0 0xff605000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
/* NOR Flash, BCSR */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
@@ -428,34 +138,10 @@
};
pci0: pcie@ff60a000 {
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- cell-index = <1>;
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff60a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -467,34 +153,10 @@
};
pci1: pcie@ff609000 {
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- cell-index = <2>;
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff609000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -506,34 +168,10 @@
};
pci2: pcie@ff60b000 {
- cell-index = <3>;
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff60b000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -544,3 +182,5 @@
};
};
};
+
+/include/ "fsl/p1023si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 29/30] powerpc/85xx: Rework MPC8568MDS device tree
2011-11-10 16:14 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 30/30] powerpc/85xx: Rework MPC8569MDS " Kumar Gala
2011-11-10 18:10 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Scott Wood
1 sibling, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi | 265 ++++++++++++++
arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi | 65 ++++
arch/powerpc/boot/dts/mpc8568mds.dts | 480 ++++---------------------
3 files changed, 393 insertions(+), 417 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
new file mode 100644
index 0000000..6a9cca8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
@@ -0,0 +1,265 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+ sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ sleep = <&pmc 0x80000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+ sleep = <&pmc 0x20000000>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&rio {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
+ interrupts = <48 2 0 0 /* error */
+ 49 2 0 0 /* bell_outb */
+ 50 2 0 0 /* bell_inb */
+ 53 2 0 0 /* msg1_tx */
+ 54 2 0 0 /* msg1_rx */
+ 55 2 0 0 /* msg2_tx */
+ 56 2 0 0 /* msg2_rx */>;
+ sleep = <&pmc 0x00080000 /* controller */
+ &pmc 0x00040000>; /* message unit */
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8568-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8568-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ i2c-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+ };
+
+ duart-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8568-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+ dma@21300 {
+ sleep = <&pmc 0x00000400>;
+ };
+
+/include/ "pq3-etsec1-0.dtsi"
+ ethernet@24000 {
+ sleep = <&pmc 0x00000080>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+ ethernet@25000 {
+ sleep = <&pmc 0x00000040>;
+ };
+
+ par_io@e0100 {
+ reg = <0xe0100 0x100>;
+ device_type = "par_io";
+ };
+
+/include/ "pq3-sec2.1-0.dtsi"
+ crypto@30000 {
+ sleep = <&pmc 0x01000000>;
+ };
+
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
+ fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8568-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ sleep = <&pmc 0x00000800>;
+ brg-frequency = <0>;
+ bus-frequency = <396000000>;
+ fsl,qe-num-riscs = <2>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@4c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,spi";
+ reg = <0x4c0 0x40>;
+ cell-index = <0>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ };
+
+ spi@500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3000 {
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x10000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x10000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
new file mode 100644
index 0000000..eacd62c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
@@ -0,0 +1,65 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8568";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8568@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 647daf8..02eaad3 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -9,60 +9,25 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8568si-pre.dtsi"
/ {
model = "MPC8568EMDS";
compatible = "MPC8568EMDS", "MPC85xxMDS";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
- rapidio0 = &rio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8568@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- sleep = <&pmc 0x00008000 // core
- &pmc 0x00004000>; // timebase
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
+ rapidio0 = &rio;
};
memory {
device_type = "memory";
- reg = <0x0 0x10000000>;
+ reg = <0x0 0x0 0x0 0x0>;
};
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
- "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <19 2>;
-
+ lbc: localbus@e0005000 {
+ reg = <0x0 0xe0005000 0x0 0x1000>;
ranges = <0x0 0x0 0xfe000000 0x02000000
0x1 0x0 0xf8000000 0x00008000
0x2 0x0 0xf0000000 0x04000000
@@ -104,288 +69,65 @@
};
};
- soc8568@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8568-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8568-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8568-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ soc: soc8568@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
i2c-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000004>;
- ranges;
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
- interrupts = <3 1>;
- interrupt-parent = <&mpic>;
+ interrupts = <3 1 0 0>;
};
};
+ };
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy2>;
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- sleep = <&pmc 0x00000400>;
-
- dma-channel@0 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ mdio@24520 {
+ phy0: ethernet-phy@7 {
+ interrupts = <1 1 0 0>;
+ reg = <0x7>;
+ device_type = "ethernet-phy";
};
- dma-channel@80 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
};
- dma-channel@100 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ phy2: ethernet-phy@2 {
+ interrupts = <1 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
};
- dma-channel@180 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ phy3: ethernet-phy@3 {
+ interrupts = <2 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
};
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy2>;
- sleep = <&pmc 0x00000080>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@7 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x7>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
sleep = <&pmc 0x00000040>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
};
- duart-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000002>;
- ranges;
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
- global-utilities@e0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- ranges = <0 0xe0000 0x1000>;
- fsl,has-rstcr;
-
- pmc: power@70 {
- compatible = "fsl,mpc8568-pmc",
- "fsl,mpc8548-pmc";
- reg = <0x70 0x20>;
- };
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- sleep = <&pmc 0x01000000>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
par_io@e0100 {
- reg = <0xe0100 0x100>;
- device_type = "par_io";
num-ports = <7>;
pio1: ucc_pin@01 {
@@ -448,57 +190,21 @@
};
};
- qe@e0080000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
- ranges = <0x0 0xe0080000 0x40000>;
- reg = <0xe0080000 0x480>;
- sleep = <&pmc 0x00000800>;
- brg-frequency = <0>;
- bus-frequency = <396000000>;
- fsl,qe-num-riscs = <2>;
- fsl,qe-num-snums = <28>;
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x10000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x10000>;
- };
- };
+ qe: qe@e0080000 {
+ ranges = <0x0 0x0 0xe0080000 0x40000>;
+ reg = <0x0 0xe0080000 0x0 0x480>;
spi@4c0 {
- cell-index = <0>;
- compatible = "fsl,spi";
- reg = <0x4c0 0x40>;
- interrupts = <2>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
spi@500 {
- cell-index = <1>;
- compatible = "fsl,spi";
- reg = <0x500 0x40>;
- interrupts = <1>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
enet2: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
@@ -510,10 +216,6 @@
enet3: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <2>;
- reg = <0x3000 0x200>;
- interrupts = <33>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
@@ -532,102 +234,57 @@
* gianfar's MDIO bus */
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
-
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- big-endian;
- interrupts = <46 2 46 2>; //high:30 low:30
- interrupt-parent = <&mpic>;
- };
-
};
pci0: pci@e0008000 {
+ reg = <0x0 0xe0008000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
- 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
/* IDSEL 0x13 AD19 */
- 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
- 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
- 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
- sleep = <&pmc 0x80000000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
+ 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
+ 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
};
/* PCI Express */
pci1: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
- sleep = <&pmc 0x20000000>;
- clock-frequency = <33333333>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -638,22 +295,9 @@
};
};
- rio0: rapidio@e00c00000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
- reg = <0xe00c0000 0x20000>;
- ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
- interrupts = <48 2 /* error */
- 49 2 /* bell_outb */
- 50 2 /* bell_inb */
- 53 2 /* msg1_tx */
- 54 2 /* msg1_rx */
- 55 2 /* msg2_tx */
- 56 2 /* msg2_rx */>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00080000 /* controller */
- &pmc 0x00040000>; /* message unit */
+ rio: rapidio@e00c00000 {
+ reg = <0x0 0xe00c0000 0x0 0x20000>;
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
};
leds {
@@ -672,3 +316,5 @@
};
};
};
+
+/include/ "fsl/mpc8568si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* [RFC][PATCH 30/30] powerpc/85xx: Rework MPC8569MDS device tree
2011-11-10 16:14 ` [RFC][PATCH 29/30] powerpc/85xx: Rework MPC8568MDS " Kumar Gala
@ 2011-11-10 16:14 ` Kumar Gala
0 siblings, 0 replies; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi | 292 ++++++++++++++++++
arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi | 64 ++++
arch/powerpc/boot/dts/mpc8569mds.dts | 409 ++-----------------------
3 files changed, 389 insertions(+), 376 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
new file mode 100644
index 0000000..eb75a18
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
@@ -0,0 +1,292 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+ sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+ sleep = <&pmc 0x20000000>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&rio {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
+ interrupts = <48 2 0 0 /* error */
+ 49 2 0 0 /* bell_outb */
+ 50 2 0 0 /* bell_inb */
+ 53 2 0 0 /* msg1_tx */
+ 54 2 0 0 /* msg1_rx */
+ 55 2 0 0 /* msg2_tx */
+ 56 2 0 0 /* msg2_rx */>;
+ sleep = <&pmc 0x00080000>;
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8569-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8569-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ i2c-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+ };
+
+ duart-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8569-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ sleep = <&pmc 0x00200000>;
+ };
+
+ par_io@e0100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe0100 0x100>;
+ ranges = <0x0 0xe0100 0x100>;
+ device_type = "par_io";
+ };
+
+/include/ "pq3-sec3.1-0.dtsi"
+ crypto@30000 {
+ sleep = <&pmc 0x01000000>;
+ };
+
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
+ fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8569-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ sleep = <&pmc 0x00000800>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ fsl,qe-num-riscs = <4>;
+ fsl,qe-num-snums = <46>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+ interrupt-parent = <&mpic>;
+ };
+
+ timer@440 {
+ compatible = "fsl,mpc8569-qe-gtm",
+ "fsl,qe-gtm", "fsl,gtm";
+ reg = <0x440 0x40>;
+ interrupts = <12 13 14 15>;
+ interrupt-parent = <&qeic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ spi@4c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+ reg = <0x4c0 0x40>;
+ cell-index = <0>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ };
+
+ spi@500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ };
+
+ usb@6c0 {
+ compatible = "fsl,mpc8569-qe-usb",
+ "fsl,mpc8323-qe-usb";
+ reg = <0x6c0 0x40 0x8b00 0x100>;
+ interrupts = <11>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3000 {
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3200 {
+ cell-index = <4>;
+ reg = <0x3200 0x200>;
+ interrupts = <35>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3400 {
+ cell-index = <6>;
+ reg = <0x3400 0x200>;
+ interrupts = <41>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3600 {
+ cell-index = <8>;
+ reg = <0x3600 0x200>;
+ interrupts = <43>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x20000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x20000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
new file mode 100644
index 0000000..b07064d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8569";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8569@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 8b72eaf..976a7f9 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -9,66 +9,36 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8569si-pre.dtsi"
/ {
model = "MPC8569EMDS";
compatible = "fsl,MPC8569EMDS";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet5 = &enet5;
ethernet7 = &enet7;
- pci1 = &pci1;
- rapidio0 = &rio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8569@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- sleep = <&pmc 0x00008000 // core
- &pmc 0x00004000>; // timebase
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
+ rapidio0 = &rio;
};
memory {
device_type = "memory";
};
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x08000000>;
-
- ranges = <0x0 0x0 0xfe000000 0x02000000
- 0x1 0x0 0xf8000000 0x00008000
- 0x2 0x0 0xf0000000 0x04000000
- 0x3 0x0 0xfc000000 0x00008000
- 0x4 0x0 0xf8008000 0x00008000
- 0x5 0x0 0xf8010000 0x00008000>;
+ lbc: localbus@e0005000 {
+ reg = <0x0 0xe0005000 0x0 0x1000>;
+
+ ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
+ 0x1 0x0 0x0 0xf8000000 0x00008000
+ 0x2 0x0 0x0 0xf0000000 0x04000000
+ 0x3 0x0 0x0 0xfc000000 0x00008000
+ 0x4 0x0 0x0 0xf8008000 0x00008000
+ 0x5 0x0 0x0 0xf8010000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
@@ -133,220 +103,25 @@
};
};
- soc@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,mpc8569-immr", "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8569-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8569-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
+ soc: soc@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
i2c-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000004>;
- ranges;
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
- interrupts = <3 1>;
- interrupt-parent = <&mpic>;
+ interrupts = <3 1 0 0>;
};
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
- };
-
- duart-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000002>;
- ranges;
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8569-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
};
- sdhci@2e000 {
- compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x8>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00200000>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sdhc@2e000 {
status = "disabled";
sdhci,1-bit-only;
};
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- sleep = <&pmc 0x01000000>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- ranges = <0 0xe0000 0x1000>;
- fsl,has-rstcr;
-
- pmc: power@70 {
- compatible = "fsl,mpc8569-pmc",
- "fsl,mpc8548-pmc";
- reg = <0x70 0x20>;
- };
- };
-
par_io@e0100 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xe0100 0x100>;
- ranges = <0x0 0xe0100 0x100>;
- device_type = "par_io";
num-ports = <7>;
qe_pio_e: gpio-controller@80 {
@@ -447,47 +222,11 @@
};
};
- qe@e0080000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
- ranges = <0x0 0xe0080000 0x40000>;
- reg = <0xe0080000 0x480>;
- sleep = <&pmc 0x00000800>;
- brg-frequency = <0>;
- bus-frequency = <0>;
- fsl,qe-num-riscs = <4>;
- fsl,qe-num-snums = <46>;
-
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- interrupts = <46 2 46 2>; //high:30 low:30
- interrupt-parent = <&mpic>;
- };
-
- timer@440 {
- compatible = "fsl,mpc8569-qe-gtm",
- "fsl,qe-gtm", "fsl,gtm";
- reg = <0x440 0x40>;
- interrupts = <12 13 14 15>;
- interrupt-parent = <&qeic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
+ qe: qe@e0080000 {
+ ranges = <0x0 0x0 0xe0080000 0x40000>;
+ reg = <0x0 0xe0080000 0x0 0x480>;
spi@4c0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
- reg = <0x4c0 0x40>;
- cell-index = <0>;
- interrupts = <2>;
- interrupt-parent = <&qeic>;
gpios = <&qe_pio_e 30 0>;
mode = "cpu-qe";
@@ -499,20 +238,10 @@
};
spi@500 {
- cell-index = <1>;
- compatible = "fsl,spi";
- reg = <0x500 0x40>;
- interrupts = <1>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
usb@6c0 {
- compatible = "fsl,mpc8569-qe-usb",
- "fsl,mpc8323-qe-usb";
- reg = <0x6c0 0x40 0x8b00 0x100>;
- interrupts = <11>;
- interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk5";
fsl,lowspeed-clock = "brg10";
gpios = <&qe_pio_f 3 0 /* USBOE */
@@ -527,10 +256,6 @@
enet0: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk12";
@@ -548,35 +273,33 @@
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <4 1>;
+ interrupts = <4 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
qe_phy5: ethernet-phy@04 {
- interrupt-parent = <&mpic>;
reg = <0x04>;
device_type = "ethernet-phy";
};
qe_phy7: ethernet-phy@06 {
- interrupt-parent = <&mpic>;
reg = <0x6>;
device_type = "ethernet-phy";
};
@@ -610,10 +333,6 @@
enet2: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <3>;
- reg = <0x2200 0x200>;
- interrupts = <34>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk12";
@@ -637,10 +356,6 @@
enet1: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <2>;
- reg = <0x3000 0x200>;
- interrupts = <33>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
@@ -664,10 +379,6 @@
enet3: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <4>;
- reg = <0x3200 0x200>;
- interrupts = <35>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
@@ -691,10 +402,6 @@
enet5: ucc@3400 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <6>;
- reg = <0x3400 0x200>;
- interrupts = <41>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
@@ -706,10 +413,6 @@
enet7: ucc@3600 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <8>;
- reg = <0x3600 0x200>;
- interrupts = <43>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
@@ -717,50 +420,14 @@
phy-handle = <&qe_phy7>;
phy-connection-type = "sgmii";
};
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x20000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x20000>;
- };
- };
-
};
/* PCI Express */
pci1: pcie@e000a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
- sleep = <&pmc 0x20000000>;
- clock-frequency = <33333333>;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -771,20 +438,10 @@
};
};
- rio0: rapidio@e00c00000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
- reg = <0xe00c0000 0x20000>;
- ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
- interrupts = <48 2 /* error */
- 49 2 /* bell_outb */
- 50 2 /* bell_inb */
- 53 2 /* msg1_tx */
- 54 2 /* msg1_rx */
- 55 2 /* msg2_tx */
- 56 2 /* msg2_rx */>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00080000>;
+ rio: rapidio@e00c00000 {
+ reg = <0x0 0xe00c0000 0x0 0x20000>;
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
};
};
+
+/include/ "fsl/mpc8569si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS device tree
2011-11-10 16:13 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS " Kumar Gala
@ 2011-11-10 17:30 ` Tabi Timur-B04825
2011-11-10 18:50 ` Kumar Gala
2011-11-15 23:49 ` Tabi Timur-B04825
2 siblings, 1 reply; 45+ messages in thread
From: Tabi Timur-B04825 @ 2011-11-10 17:30 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 10, 2011 at 10:13 AM, Kumar Gala <galak@kernel.crashing.org> wr=
ote:
>
> =A0arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | =A0235 +++++++++++++++
> =A0arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi =A0| =A0 68 +++++
> =A0arch/powerpc/boot/dts/p1022ds.dts =A0 =A0 =A0 =A0 =A0 | =A0431 +------=
--------------------
> =A03 files changed, 318 insertions(+), 416 deletions(-)
> =A0create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
> =A0create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
I understand the value of removing duplication of DTS contents, so
that we don't copy-paste the same nodes over and over again, but now
that you've added pre- and post- dtsi files, I wonder if you're not
jumping out of the frying pan and into the flame. It seems that the
DTS files are more fragile than ever, and it's more difficult now to
figure out which files go where.
Another concern I have is whether this will force all Pxxxx boards to
have the same CCSR address. I don't think so, because I didn't see
it, but I just want to make sure.
--=20
Timur Tabi
Linux kernel developer at Freescale=
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree
2011-11-10 16:13 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB " Kumar Gala
@ 2011-11-10 18:05 ` Scott Wood
2011-11-10 18:46 ` Kumar Gala
1 sibling, 1 reply; 45+ messages in thread
From: Scott Wood @ 2011-11-10 18:05 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 10, 2011 at 10:13:51AM -0600, Kumar Gala wrote:
> Split the P1020 SoC device tree into what we can include as a 'prefix'
> to the board device tree and what needs to be included as a 'postfix'.
>
> This allows use more re-use and less duplication between various board
> device tree configurations (32-bit address map vs 36-bit address map).
Could you elaborate on the issues that require this pre/post approach?
What does the SoC part need to specify that has to override or go within
something the board specifies?
-Scott
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS device tree
2011-11-10 16:14 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 29/30] powerpc/85xx: Rework MPC8568MDS " Kumar Gala
@ 2011-11-10 18:10 ` Scott Wood
2011-11-10 18:42 ` Kumar Gala
1 sibling, 1 reply; 45+ messages in thread
From: Scott Wood @ 2011-11-10 18:10 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 10, 2011 at 10:14:11AM -0600, Kumar Gala wrote:
> - power@e0070{
> - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",
> - "fsl,p1022-pmc";
> - reg = <0xe0070 0x20>;
> - etsec1_clk: soc-clk@B0{
> - fsl,pmcdr-mask = <0x00000080>;
> - };
> - etsec2_clk: soc-clk@B1{
> - fsl,pmcdr-mask = <0x00000040>;
> - };
> - etsec3_clk: soc-clk@B2{
> - fsl,pmcdr-mask = <0x00000020>;
> - };
> - };
The compatibles on this node are wrong, but it looks like you're removing
it altogether?
-Scott
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS device tree
2011-11-10 18:10 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Scott Wood
@ 2011-11-10 18:42 ` Kumar Gala
2011-11-10 18:55 ` Scott Wood
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 18:42 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
On Nov 10, 2011, at 12:10 PM, Scott Wood wrote:
> On Thu, Nov 10, 2011 at 10:14:11AM -0600, Kumar Gala wrote:
>> - power@e0070{
>> - compatible =3D "fsl,mpc8536-pmc", =
"fsl,mpc8548-pmc",
>> - "fsl,p1022-pmc";
>> - reg =3D <0xe0070 0x20>;
>> - etsec1_clk: soc-clk@B0{
>> - fsl,pmcdr-mask =3D <0x00000080>;
>> - };
>> - etsec2_clk: soc-clk@B1{
>> - fsl,pmcdr-mask =3D <0x00000040>;
>> - };
>> - etsec3_clk: soc-clk@B2{
>> - fsl,pmcdr-mask =3D <0x00000020>;
>> - };
>> - };
>=20
> The compatibles on this node are wrong, but it looks like you're =
removing
> it altogether?
>=20
> -Scott
Yeah, I think the whole thing needs to be relocated at because there are =
no etsec's on P1023, etc. So will comment about this in commit message
- k=
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree
2011-11-10 18:05 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC " Scott Wood
@ 2011-11-10 18:46 ` Kumar Gala
2011-11-10 18:58 ` Scott Wood
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 18:46 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
On Nov 10, 2011, at 12:05 PM, Scott Wood wrote:
> On Thu, Nov 10, 2011 at 10:13:51AM -0600, Kumar Gala wrote:
>> Split the P1020 SoC device tree into what we can include as a =
'prefix'
>> to the board device tree and what needs to be included as a =
'postfix'.
>>=20
>> This allows use more re-use and less duplication between various =
board
>> device tree configurations (32-bit address map vs 36-bit address =
map).
>=20
> Could you elaborate on the issues that require this pre/post approach?
We utilize two 'features' of dtc to accomplish things. One is includes =
the other is 'merging of labeled nodes'.
We can using merging to allow the board to specify the "reg" & "ranges" =
values of a SoC node that might vary between physical address maps =
(32-bit vs 36-bit as example).
dtc is able to 'merge' multiple labeled nodes as well. So we use that =
to handle board specific values for something like localbus if we want =
to support both a 32-bit and 36-bit address map.
> What does the SoC part need to specify that has to override or go =
within
> something the board specifies?
Not sure I follow the question.
- k=
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS device tree
2011-11-10 17:30 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
@ 2011-11-10 18:50 ` Kumar Gala
0 siblings, 0 replies; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 18:50 UTC (permalink / raw)
To: Tabi Timur-B04825; +Cc: linuxppc-dev
On Nov 10, 2011, at 11:30 AM, Tabi Timur-B04825 wrote:
> On Thu, Nov 10, 2011 at 10:13 AM, Kumar Gala =
<galak@kernel.crashing.org> wrote:
>>=20
>> arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | 235 +++++++++++++++
>> arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi | 68 +++++
>> arch/powerpc/boot/dts/p1022ds.dts | 431 =
+--------------------------
>> 3 files changed, 318 insertions(+), 416 deletions(-)
>> create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
>> create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
>=20
> I understand the value of removing duplication of DTS contents, so
> that we don't copy-paste the same nodes over and over again, but now
> that you've added pre- and post- dtsi files, I wonder if you're not
> jumping out of the frying pan and into the flame. It seems that the
> DTS files are more fragile than ever, and it's more difficult now to
> figure out which files go where.
I hope that is not true, as the template is the same.
BOARD.dts:
include "fsl/SOCsi-pre.dtsi"
=85
include "fsl/SOCsi-post.dtsi"
[ some boards may do more complicated things like we do on MPC8572DS to =
deal with 32-bit vs 36-bit addr maps, or CAMP use examples ]
All BOARD dts's should follow this pattern given the knowledge of which =
SoC you are utilizing. For a board port, you should NEVER have to touch =
anything in the 'fsl/' directory. That assumes, we've done a good job =
with the .dts struct in general. =46rom time to time I'm sure we'll =
find some pattern or IP block we need to fix.
> Another concern I have is whether this will force all Pxxxx boards to
> have the same CCSR address. I don't think so, because I didn't see
> it, but I just want to make sure.
Nope, we can have as many boards for the same SoC w/different address =
maps and share the same SOC.dtsi files
- k=
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS device tree
2011-11-10 18:42 ` Kumar Gala
@ 2011-11-10 18:55 ` Scott Wood
2011-11-10 20:24 ` Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Scott Wood @ 2011-11-10 18:55 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 10, 2011 at 12:42:54PM -0600, Kumar Gala wrote:
>
> On Nov 10, 2011, at 12:10 PM, Scott Wood wrote:
>
> > On Thu, Nov 10, 2011 at 10:14:11AM -0600, Kumar Gala wrote:
> >> - power@e0070{
> >> - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",
> >> - "fsl,p1022-pmc";
> >> - reg = <0xe0070 0x20>;
> >> - etsec1_clk: soc-clk@B0{
> >> - fsl,pmcdr-mask = <0x00000080>;
> >> - };
> >> - etsec2_clk: soc-clk@B1{
> >> - fsl,pmcdr-mask = <0x00000040>;
> >> - };
> >> - etsec3_clk: soc-clk@B2{
> >> - fsl,pmcdr-mask = <0x00000020>;
> >> - };
> >> - };
> >
> > The compatibles on this node are wrong, but it looks like you're removing
> > it altogether?
> >
> > -Scott
>
> Yeah, I think the whole thing needs to be relocated at because there are no etsec's on P1023, etc. So will comment about this in commit message
Ah right, the etsec stuff should go as well. :-)
It should look like this:
power@e0070 {
compatible = "fsl,p1023-pmc", "fsl,mpc8548-pmc";
reg = <0xe0070 0x20>;
};
-Scott
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree
2011-11-10 18:46 ` Kumar Gala
@ 2011-11-10 18:58 ` Scott Wood
2011-11-10 20:27 ` Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Scott Wood @ 2011-11-10 18:58 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 10, 2011 at 12:46:27PM -0600, Kumar Gala wrote:
>
> On Nov 10, 2011, at 12:05 PM, Scott Wood wrote:
>
> > On Thu, Nov 10, 2011 at 10:13:51AM -0600, Kumar Gala wrote:
> >> Split the P1020 SoC device tree into what we can include as a 'prefix'
> >> to the board device tree and what needs to be included as a 'postfix'.
> >>
> >> This allows use more re-use and less duplication between various board
> >> device tree configurations (32-bit address map vs 36-bit address map).
> >
> > Could you elaborate on the issues that require this pre/post approach?
>
> We utilize two 'features' of dtc to accomplish things. One is includes the other is 'merging of labeled nodes'.
>
> We can using merging to allow the board to specify the "reg" & "ranges"
> values of a SoC node that might vary between physical address maps
> (32-bit vs 36-bit as example).
>
> dtc is able to 'merge' multiple labeled nodes as well. So we use that
> to handle board specific values for something like localbus if we want
> to support both a 32-bit and 36-bit address map.
>
> > What does the SoC part need to specify that has to override or go within
> > something the board specifies?
>
> Not sure I follow the question.
My question is, why does the stuff in post need to be in post, versus pre?
Why can't pre define the soc node, and let the board dts set ranges?
Likewise for localbus, pci, etc.
-Scott
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS device tree
2011-11-10 18:55 ` Scott Wood
@ 2011-11-10 20:24 ` Kumar Gala
0 siblings, 0 replies; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 20:24 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
On Nov 10, 2011, at 12:55 PM, Scott Wood wrote:
> On Thu, Nov 10, 2011 at 12:42:54PM -0600, Kumar Gala wrote:
>>=20
>> On Nov 10, 2011, at 12:10 PM, Scott Wood wrote:
>>=20
>>> On Thu, Nov 10, 2011 at 10:14:11AM -0600, Kumar Gala wrote:
>>>> - power@e0070{
>>>> - compatible =3D "fsl,mpc8536-pmc", =
"fsl,mpc8548-pmc",
>>>> - "fsl,p1022-pmc";
>>>> - reg =3D <0xe0070 0x20>;
>>>> - etsec1_clk: soc-clk@B0{
>>>> - fsl,pmcdr-mask =3D <0x00000080>;
>>>> - };
>>>> - etsec2_clk: soc-clk@B1{
>>>> - fsl,pmcdr-mask =3D <0x00000040>;
>>>> - };
>>>> - etsec3_clk: soc-clk@B2{
>>>> - fsl,pmcdr-mask =3D <0x00000020>;
>>>> - };
>>>> - };
>>>=20
>>> The compatibles on this node are wrong, but it looks like you're =
removing
>>> it altogether?
>>>=20
>>> -Scott
>>=20
>> Yeah, I think the whole thing needs to be relocated at because there =
are no etsec's on P1023, etc. So will comment about this in commit =
message
>=20
> Ah right, the etsec stuff should go as well. :-)
>=20
> It should look like this:
>=20
> power@e0070 {
> compatible =3D "fsl,p1023-pmc", "fsl,mpc8548-pmc";
> reg =3D <0xe0070 0x20>;
> };
What does being compatible with mpc8548-pmc mean?
- k=
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree
2011-11-10 18:58 ` Scott Wood
@ 2011-11-10 20:27 ` Kumar Gala
2011-11-11 15:29 ` Scott Wood
0 siblings, 1 reply; 45+ messages in thread
From: Kumar Gala @ 2011-11-10 20:27 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
On Nov 10, 2011, at 12:58 PM, Scott Wood wrote:
> On Thu, Nov 10, 2011 at 12:46:27PM -0600, Kumar Gala wrote:
>>=20
>> On Nov 10, 2011, at 12:05 PM, Scott Wood wrote:
>>=20
>>> On Thu, Nov 10, 2011 at 10:13:51AM -0600, Kumar Gala wrote:
>>>> Split the P1020 SoC device tree into what we can include as a =
'prefix'
>>>> to the board device tree and what needs to be included as a =
'postfix'.
>>>>=20
>>>> This allows use more re-use and less duplication between various =
board
>>>> device tree configurations (32-bit address map vs 36-bit address =
map).
>>>=20
>>> Could you elaborate on the issues that require this pre/post =
approach?
>>=20
>> We utilize two 'features' of dtc to accomplish things. One is =
includes the other is 'merging of labeled nodes'.
>>=20
>> We can using merging to allow the board to specify the "reg" & =
"ranges"
>> values of a SoC node that might vary between physical address maps
>> (32-bit vs 36-bit as example).
>>=20
>> dtc is able to 'merge' multiple labeled nodes as well. So we use =
that
>> to handle board specific values for something like localbus if we =
want
>> to support both a 32-bit and 36-bit address map.
>>=20
>>> What does the SoC part need to specify that has to override or go =
within
>>> something the board specifies?
>>=20
>> Not sure I follow the question.
>=20
> My question is, why does the stuff in post need to be in post, versus =
pre?
>=20
> Why can't pre define the soc node, and let the board dts set ranges?=20=
> Likewise for localbus, pci, etc.
>=20
> -Scott
Gotcha, the reason we have -pre and -post is because of how dtc include =
mechanism works. It builds it's tree in the order things are parsed in =
the file. In addition, "labeled nodes" like we have in post for 'soc', =
'lbc', etc. have to be defined after they are referenced.
- k=
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree
2011-11-10 20:27 ` Kumar Gala
@ 2011-11-11 15:29 ` Scott Wood
0 siblings, 0 replies; 45+ messages in thread
From: Scott Wood @ 2011-11-11 15:29 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 10, 2011 at 02:27:11PM -0600, Kumar Gala wrote:
> On Nov 10, 2011, at 12:58 PM, Scott Wood wrote:
> > On Thu, Nov 10, 2011 at 12:46:27PM -0600, Kumar Gala wrote:
> >> On Nov 10, 2011, at 12:05 PM, Scott Wood wrote:
> >>> What does the SoC part need to specify that has to override or go within
> >>> something the board specifies?
> >>
> >> Not sure I follow the question.
> >
> > My question is, why does the stuff in post need to be in post, versus pre?
> >
> > Why can't pre define the soc node, and let the board dts set ranges?
> > Likewise for localbus, pci, etc.
> >
> > -Scott
>
> Gotcha, the reason we have -pre and -post is because of how dtc include
> mechanism works. It builds it's tree in the order things are parsed in
> the file.
That doesn't really answer the question.
> In addition, "labeled nodes" like we have in post for 'soc', 'lbc',
> etc. have to be defined after they are referenced.
Don't you mean defined before they are referenced?
What's wrong with defining them in pre?
-Scott
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS device tree
2011-11-10 16:13 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS " Kumar Gala
2011-11-10 17:30 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
@ 2011-11-15 23:49 ` Tabi Timur-B04825
2011-11-16 21:47 ` Timur Tabi
2 siblings, 1 reply; 45+ messages in thread
From: Tabi Timur-B04825 @ 2011-11-15 23:49 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 10, 2011 at 10:13 AM, Kumar Gala <galak@kernel.crashing.org> wr=
ote:
>
> + =A0 =A0 =A0 lbc: localbus@fffe05000 {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0 0xffe05000 0 0x1000>;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 interrupts =3D <19 2 0 0>;
I just noticed this bug in the original p1022ds.dts, and I see you're
carrying it over here. The reg property should look like this:
reg =3D <0xf 0xffe05000 0 0x1000>;
^^^
Do you want to fix this here, or do you want me to submit a patch that
fixes the original p1022ds.dts?
--=20
Timur Tabi
Linux kernel developer at Freescale=
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS device tree
2011-11-15 23:49 ` Tabi Timur-B04825
@ 2011-11-16 21:47 ` Timur Tabi
2011-11-16 21:50 ` Kumar Gala
0 siblings, 1 reply; 45+ messages in thread
From: Timur Tabi @ 2011-11-16 21:47 UTC (permalink / raw)
Cc: linuxppc-dev
wrote:
> I just noticed this bug in the original p1022ds.dts, and I see you're
> carrying it over here. The reg property should look like this:
>
> reg = <0xf 0xffe05000 0 0x1000>;
> ^^^
It looks like there's also a problem with the 'ranges' property:
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
^^^
0x3 0x0 0xf 0xffdf0000 0x00008000>;
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS device tree
2011-11-16 21:47 ` Timur Tabi
@ 2011-11-16 21:50 ` Kumar Gala
0 siblings, 0 replies; 45+ messages in thread
From: Kumar Gala @ 2011-11-16 21:50 UTC (permalink / raw)
To: Timur Tabi; +Cc: linuxppc-dev
On Nov 16, 2011, at 3:47 PM, Timur Tabi wrote:
> wrote:
>> I just noticed this bug in the original p1022ds.dts, and I see you're
>> carrying it over here. The reg property should look like this:
>>
>> reg = <0xf 0xffe05000 0 0x1000>;
>> ^^^
>
> It looks like there's also a problem with the 'ranges' property:
>
> ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
> 0x1 0x0 0xf 0xe0000000 0x08000000
> 0x2 0x0 0x0 0xffa00000 0x00040000
> ^^^
> 0x3 0x0 0xf 0xffdf0000 0x00008000>;
Gotcha, existing bug but will fix it.
- k
^ permalink raw reply [flat|nested] 45+ messages in thread
end of thread, other threads:[~2011-11-16 21:50 UTC | newest]
Thread overview: 45+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-11-10 16:13 [RFC][PATCH 00/30] Rework FSL MPC85xx/Pxxxx device trees Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 01/30] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 02/30] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 03/30] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 04/30] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 05/30] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 06/30] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 07/30] powerpc/85xx: create dts components to build up an SoC Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 10/30] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 11/30] powerpc/85xx: Rework P1010RDB and P1010 " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 12/30] powerpc/85xx: Add RTC to P1010RDB " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 13/30] powerpc/85xx: Add crypto engine to P1010 SoC " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 14/30] powerpc/85xx: Add a P1010RDB 36-bit address map " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 17/30] powerpc/85xx: Rework P2020RDB " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 18/30] powerpc/85xx: Rework P1021MDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 19/30] powerpc/85xx: Rework MPC8572DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 20/30] powerpc/85xx: Rework MPC8536DS device trees Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 21/30] powerpc/85xx: Rework MPC8544DS device tree Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 22/30] powerpc/85xx: Rework MPC8548CDS device trees Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 23/30] powerpc/85xx: Rework P4080DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 24/30] powerpc/85xx: Rework P5020DS device tree Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 25/30] powerpc/85xx: Rework P3041DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 26/30] powerpc/85xx: Rework P2041RDB " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 27/30] powerpc/85xx: Rework P3060QDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 29/30] powerpc/85xx: Rework MPC8568MDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 30/30] powerpc/85xx: Rework MPC8569MDS " Kumar Gala
2011-11-10 18:10 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Scott Wood
2011-11-10 18:42 ` Kumar Gala
2011-11-10 18:55 ` Scott Wood
2011-11-10 20:24 ` Kumar Gala
2011-11-10 17:30 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
2011-11-10 18:50 ` Kumar Gala
2011-11-15 23:49 ` Tabi Timur-B04825
2011-11-16 21:47 ` Timur Tabi
2011-11-16 21:50 ` Kumar Gala
2011-11-10 18:05 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC " Scott Wood
2011-11-10 18:46 ` Kumar Gala
2011-11-10 18:58 ` Scott Wood
2011-11-10 20:27 ` Kumar Gala
2011-11-11 15:29 ` Scott Wood
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.