[PATCH V3 00/14] add clk_prepare/clk_unprepare to imx drivers

[PATCH V3 00/14] add clk_prepare/clk_unprepare to imx drivers

[Richard Zhao]

Changes since V2:
 - fix clk_prepare_enable bug

Changes since V1:
 - Add common helper functions clk_prepare_enable/clk_disable_unprepare
 - serial/imx: move clk_disable_unprepare before clk_put

Richard Zhao (14):
      clk: add helper functions clk_prepare_enable and clk_disable_unprepare
      ARM: mxc: time: add clk_prepare/clk_unprepare
      ARM: mxc: ahci: add clk_prepare/clk_unprepare
      ARM: mxc: pwm: add clk_prepare/clk_unprepare
      ARM: mxc: epit: add clk_prepare/clk_unprepare
      ARM: mxc: arch_reset: add clk_prepare/clk_unprepare
      ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare
      ARM: pm-imx5: add clk_prepare/clk_unprepare
      ARM: mx31moboard: add clk_prepare/clk_unprepare
      ARM: mxs: add clk_prepare/clk_unprepare
      serial: imx: add clk_prepare/clk_unprepare
      net: fec: add clk_prepare/clk_unprepare
      i2c: imx: add clk_prepare/clk_unprepare
      mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare

 arch/arm/mach-imx/mach-mx31moboard.c          |    2 +-
 arch/arm/mach-mx5/pm-imx5.c                   |    4 ++--
 arch/arm/mach-mxs/system.c                    |    2 +-
 arch/arm/mach-mxs/timer.c                     |    2 +-
 arch/arm/plat-mxc/audmux-v2.c                 |    8 ++++----
 arch/arm/plat-mxc/devices/platform-ahci-imx.c |   16 ++++++++--------
 arch/arm/plat-mxc/epit.c                      |    2 +-
 arch/arm/plat-mxc/pwm.c                       |    4 ++--
 arch/arm/plat-mxc/system.c                    |    2 +-
 arch/arm/plat-mxc/time.c                      |    2 +-
 drivers/i2c/busses/i2c-imx.c                  |    4 ++--
 drivers/mmc/host/sdhci-esdhc-imx.c            |    6 +++---
 drivers/net/ethernet/freescale/fec.c          |   10 +++++-----
 drivers/tty/serial/imx.c                      |    7 +++----
 include/linux/clk.h                           |   20 ++++++++++++++++++++
 15 files changed, 55 insertions(+), 36 deletions(-)

Thanks
Richard

[PATCH V3 00/14] add clk_prepare/clk_unprepare to imx drivers

[Richard Zhao]

Changes since V2:
 - fix clk_prepare_enable bug

Changes since V1:
 - Add common helper functions clk_prepare_enable/clk_disable_unprepare
 - serial/imx: move clk_disable_unprepare before clk_put

Richard Zhao (14):
      clk: add helper functions clk_prepare_enable and clk_disable_unprepare
      ARM: mxc: time: add clk_prepare/clk_unprepare
      ARM: mxc: ahci: add clk_prepare/clk_unprepare
      ARM: mxc: pwm: add clk_prepare/clk_unprepare
      ARM: mxc: epit: add clk_prepare/clk_unprepare
      ARM: mxc: arch_reset: add clk_prepare/clk_unprepare
      ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare
      ARM: pm-imx5: add clk_prepare/clk_unprepare
      ARM: mx31moboard: add clk_prepare/clk_unprepare
      ARM: mxs: add clk_prepare/clk_unprepare
      serial: imx: add clk_prepare/clk_unprepare
      net: fec: add clk_prepare/clk_unprepare
      i2c: imx: add clk_prepare/clk_unprepare
      mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare

 arch/arm/mach-imx/mach-mx31moboard.c          |    2 +-
 arch/arm/mach-mx5/pm-imx5.c                   |    4 ++--
 arch/arm/mach-mxs/system.c                    |    2 +-
 arch/arm/mach-mxs/timer.c                     |    2 +-
 arch/arm/plat-mxc/audmux-v2.c                 |    8 ++++----
 arch/arm/plat-mxc/devices/platform-ahci-imx.c |   16 ++++++++--------
 arch/arm/plat-mxc/epit.c                      |    2 +-
 arch/arm/plat-mxc/pwm.c                       |    4 ++--
 arch/arm/plat-mxc/system.c                    |    2 +-
 arch/arm/plat-mxc/time.c                      |    2 +-
 drivers/i2c/busses/i2c-imx.c                  |    4 ++--
 drivers/mmc/host/sdhci-esdhc-imx.c            |    6 +++---
 drivers/net/ethernet/freescale/fec.c          |   10 +++++-----
 drivers/tty/serial/imx.c                      |    7 +++----
 include/linux/clk.h                           |   20 ++++++++++++++++++++
 15 files changed, 55 insertions(+), 36 deletions(-)

Thanks
Richard

[PATCH V3 00/14] add clk_prepare/clk_unprepare to imx drivers

[Richard Zhao]

Changes since V2:
 - fix clk_prepare_enable bug

Changes since V1:
 - Add common helper functions clk_prepare_enable/clk_disable_unprepare
 - serial/imx: move clk_disable_unprepare before clk_put

Richard Zhao (14):
      clk: add helper functions clk_prepare_enable and clk_disable_unprepare
      ARM: mxc: time: add clk_prepare/clk_unprepare
      ARM: mxc: ahci: add clk_prepare/clk_unprepare
      ARM: mxc: pwm: add clk_prepare/clk_unprepare
      ARM: mxc: epit: add clk_prepare/clk_unprepare
      ARM: mxc: arch_reset: add clk_prepare/clk_unprepare
      ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare
      ARM: pm-imx5: add clk_prepare/clk_unprepare
      ARM: mx31moboard: add clk_prepare/clk_unprepare
      ARM: mxs: add clk_prepare/clk_unprepare
      serial: imx: add clk_prepare/clk_unprepare
      net: fec: add clk_prepare/clk_unprepare
      i2c: imx: add clk_prepare/clk_unprepare
      mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare

 arch/arm/mach-imx/mach-mx31moboard.c          |    2 +-
 arch/arm/mach-mx5/pm-imx5.c                   |    4 ++--
 arch/arm/mach-mxs/system.c                    |    2 +-
 arch/arm/mach-mxs/timer.c                     |    2 +-
 arch/arm/plat-mxc/audmux-v2.c                 |    8 ++++----
 arch/arm/plat-mxc/devices/platform-ahci-imx.c |   16 ++++++++--------
 arch/arm/plat-mxc/epit.c                      |    2 +-
 arch/arm/plat-mxc/pwm.c                       |    4 ++--
 arch/arm/plat-mxc/system.c                    |    2 +-
 arch/arm/plat-mxc/time.c                      |    2 +-
 drivers/i2c/busses/i2c-imx.c                  |    4 ++--
 drivers/mmc/host/sdhci-esdhc-imx.c            |    6 +++---
 drivers/net/ethernet/freescale/fec.c          |   10 +++++-----
 drivers/tty/serial/imx.c                      |    7 +++----
 include/linux/clk.h                           |   20 ++++++++++++++++++++
 15 files changed, 55 insertions(+), 36 deletions(-)

Thanks
Richard

[PATCH V3 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 include/linux/clk.h |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/include/linux/clk.h b/include/linux/clk.h
index 7213b52..a7dc00d 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -107,6 +107,26 @@ static inline void clk_unprepare(struct clk *clk)
 }
 #endif
 
+static inline int clk_prepare_enable(struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare(clk);
+	if (ret)
+		return ret;
+	ret = clk_enable(clk);
+	if (ret)
+		clk_unprepare(clk);
+
+	return ret;
+}
+
+static inline void clk_disable_unprepare(struct clk *clk)
+{
+	clk_disable(clk);
+	clk_unprepare(clk);
+}
+
 /**
  * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
  *		  This is only valid once the clock source has been enabled.
-- 
1.7.5.4

[PATCH V3 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 include/linux/clk.h |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/include/linux/clk.h b/include/linux/clk.h
index 7213b52..a7dc00d 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -107,6 +107,26 @@ static inline void clk_unprepare(struct clk *clk)
 }
 #endif
 
+static inline int clk_prepare_enable(struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare(clk);
+	if (ret)
+		return ret;
+	ret = clk_enable(clk);
+	if (ret)
+		clk_unprepare(clk);
+
+	return ret;
+}
+
+static inline void clk_disable_unprepare(struct clk *clk)
+{
+	clk_disable(clk);
+	clk_unprepare(clk);
+}
+
 /**
  * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
  *		  This is only valid once the clock source has been enabled.
-- 
1.7.5.4

[PATCH V3 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 include/linux/clk.h |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/include/linux/clk.h b/include/linux/clk.h
index 7213b52..a7dc00d 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -107,6 +107,26 @@ static inline void clk_unprepare(struct clk *clk)
 }
 #endif
 
+static inline int clk_prepare_enable(struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare(clk);
+	if (ret)
+		return ret;
+	ret = clk_enable(clk);
+	if (ret)
+		clk_unprepare(clk);
+
+	return ret;
+}
+
+static inline void clk_disable_unprepare(struct clk *clk)
+{
+	clk_disable(clk);
+	clk_unprepare(clk);
+}
+
 /**
  * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
  *		  This is only valid once the clock source has been enabled.
-- 
1.7.5.4

[PATCH V3 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/plat-mxc/time.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 4b0fe28..b4e8b18 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -292,7 +292,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
 
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
 
-- 
1.7.5.4

[PATCH V3 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/plat-mxc/time.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 4b0fe28..b4e8b18 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -292,7 +292,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
 
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
 
-- 
1.7.5.4

[PATCH V3 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/time.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 4b0fe28..b4e8b18 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -292,7 +292,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
 
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
 
-- 
1.7.5.4

[PATCH V3 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/plat-mxc/devices/platform-ahci-imx.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
index d8a56ae..ade4a1c 100644
--- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -60,9 +60,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 		dev_err(dev, "no sata clock.\n");
 		return PTR_ERR(sata_clk);
 	}
-	ret = clk_enable(sata_clk);
+	ret = clk_prepare_enable(sata_clk);
 	if (ret) {
-		dev_err(dev, "can't enable sata clock.\n");
+		dev_err(dev, "can't prepare/enable sata clock.\n");
 		goto put_sata_clk;
 	}
 
@@ -73,9 +73,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 		ret = PTR_ERR(sata_ref_clk);
 		goto release_sata_clk;
 	}
-	ret = clk_enable(sata_ref_clk);
+	ret = clk_prepare_enable(sata_ref_clk);
 	if (ret) {
-		dev_err(dev, "can't enable sata ref clock.\n");
+		dev_err(dev, "can't prepare/enable sata ref clock.\n");
 		goto put_sata_ref_clk;
 	}
 
@@ -104,11 +104,11 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 	return 0;
 
 release_sata_ref_clk:
-	clk_disable(sata_ref_clk);
+	clk_disable_unprepare(sata_ref_clk);
 put_sata_ref_clk:
 	clk_put(sata_ref_clk);
 release_sata_clk:
-	clk_disable(sata_clk);
+	clk_disable_unprepare(sata_clk);
 put_sata_clk:
 	clk_put(sata_clk);
 
@@ -117,10 +117,10 @@ put_sata_clk:
 
 static void imx_sata_exit(struct device *dev)
 {
-	clk_disable(sata_ref_clk);
+	clk_disable_unprepare(sata_ref_clk);
 	clk_put(sata_ref_clk);
 
-	clk_disable(sata_clk);
+	clk_disable_unprepare(sata_clk);
 	clk_put(sata_clk);
 
 }
-- 
1.7.5.4

[PATCH V3 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/plat-mxc/devices/platform-ahci-imx.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
index d8a56ae..ade4a1c 100644
--- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -60,9 +60,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 		dev_err(dev, "no sata clock.\n");
 		return PTR_ERR(sata_clk);
 	}
-	ret = clk_enable(sata_clk);
+	ret = clk_prepare_enable(sata_clk);
 	if (ret) {
-		dev_err(dev, "can't enable sata clock.\n");
+		dev_err(dev, "can't prepare/enable sata clock.\n");
 		goto put_sata_clk;
 	}
 
@@ -73,9 +73,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 		ret = PTR_ERR(sata_ref_clk);
 		goto release_sata_clk;
 	}
-	ret = clk_enable(sata_ref_clk);
+	ret = clk_prepare_enable(sata_ref_clk);
 	if (ret) {
-		dev_err(dev, "can't enable sata ref clock.\n");
+		dev_err(dev, "can't prepare/enable sata ref clock.\n");
 		goto put_sata_ref_clk;
 	}
 
@@ -104,11 +104,11 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 	return 0;
 
 release_sata_ref_clk:
-	clk_disable(sata_ref_clk);
+	clk_disable_unprepare(sata_ref_clk);
 put_sata_ref_clk:
 	clk_put(sata_ref_clk);
 release_sata_clk:
-	clk_disable(sata_clk);
+	clk_disable_unprepare(sata_clk);
 put_sata_clk:
 	clk_put(sata_clk);
 
@@ -117,10 +117,10 @@ put_sata_clk:
 
 static void imx_sata_exit(struct device *dev)
 {
-	clk_disable(sata_ref_clk);
+	clk_disable_unprepare(sata_ref_clk);
 	clk_put(sata_ref_clk);
 
-	clk_disable(sata_clk);
+	clk_disable_unprepare(sata_clk);
 	clk_put(sata_clk);
 
 }
-- 
1.7.5.4

[PATCH V3 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/devices/platform-ahci-imx.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
index d8a56ae..ade4a1c 100644
--- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -60,9 +60,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 		dev_err(dev, "no sata clock.\n");
 		return PTR_ERR(sata_clk);
 	}
-	ret = clk_enable(sata_clk);
+	ret = clk_prepare_enable(sata_clk);
 	if (ret) {
-		dev_err(dev, "can't enable sata clock.\n");
+		dev_err(dev, "can't prepare/enable sata clock.\n");
 		goto put_sata_clk;
 	}
 
@@ -73,9 +73,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 		ret = PTR_ERR(sata_ref_clk);
 		goto release_sata_clk;
 	}
-	ret = clk_enable(sata_ref_clk);
+	ret = clk_prepare_enable(sata_ref_clk);
 	if (ret) {
-		dev_err(dev, "can't enable sata ref clock.\n");
+		dev_err(dev, "can't prepare/enable sata ref clock.\n");
 		goto put_sata_ref_clk;
 	}
 
@@ -104,11 +104,11 @@ static int imx_sata_init(struct device *dev, void __iomem *addr)
 	return 0;
 
 release_sata_ref_clk:
-	clk_disable(sata_ref_clk);
+	clk_disable_unprepare(sata_ref_clk);
 put_sata_ref_clk:
 	clk_put(sata_ref_clk);
 release_sata_clk:
-	clk_disable(sata_clk);
+	clk_disable_unprepare(sata_clk);
 put_sata_clk:
 	clk_put(sata_clk);
 
@@ -117,10 +117,10 @@ put_sata_clk:
 
 static void imx_sata_exit(struct device *dev)
 {
-	clk_disable(sata_ref_clk);
+	clk_disable_unprepare(sata_ref_clk);
 	clk_put(sata_ref_clk);
 
-	clk_disable(sata_clk);
+	clk_disable_unprepare(sata_clk);
 	clk_put(sata_clk);
 
 }
-- 
1.7.5.4

[PATCH V3 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/plat-mxc/pwm.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42d74ea..68c7199b 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -118,7 +118,7 @@ int pwm_enable(struct pwm_device *pwm)
 	int rc = 0;
 
 	if (!pwm->clk_enabled) {
-		rc = clk_enable(pwm->clk);
+		rc = clk_prepare_enable(pwm->clk);
 		if (!rc)
 			pwm->clk_enabled = 1;
 	}
@@ -131,7 +131,7 @@ void pwm_disable(struct pwm_device *pwm)
 	writel(0, pwm->mmio_base + MX3_PWMCR);
 
 	if (pwm->clk_enabled) {
-		clk_disable(pwm->clk);
+		clk_disable_unprepare(pwm->clk);
 		pwm->clk_enabled = 0;
 	}
 }
-- 
1.7.5.4

[PATCH V3 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/plat-mxc/pwm.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42d74ea..68c7199b 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -118,7 +118,7 @@ int pwm_enable(struct pwm_device *pwm)
 	int rc = 0;
 
 	if (!pwm->clk_enabled) {
-		rc = clk_enable(pwm->clk);
+		rc = clk_prepare_enable(pwm->clk);
 		if (!rc)
 			pwm->clk_enabled = 1;
 	}
@@ -131,7 +131,7 @@ void pwm_disable(struct pwm_device *pwm)
 	writel(0, pwm->mmio_base + MX3_PWMCR);
 
 	if (pwm->clk_enabled) {
-		clk_disable(pwm->clk);
+		clk_disable_unprepare(pwm->clk);
 		pwm->clk_enabled = 0;
 	}
 }
-- 
1.7.5.4

[PATCH V3 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/pwm.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42d74ea..68c7199b 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -118,7 +118,7 @@ int pwm_enable(struct pwm_device *pwm)
 	int rc = 0;
 
 	if (!pwm->clk_enabled) {
-		rc = clk_enable(pwm->clk);
+		rc = clk_prepare_enable(pwm->clk);
 		if (!rc)
 			pwm->clk_enabled = 1;
 	}
@@ -131,7 +131,7 @@ void pwm_disable(struct pwm_device *pwm)
 	writel(0, pwm->mmio_base + MX3_PWMCR);
 
 	if (pwm->clk_enabled) {
-		clk_disable(pwm->clk);
+		clk_disable_unprepare(pwm->clk);
 		pwm->clk_enabled = 0;
 	}
 }
-- 
1.7.5.4

[PATCH V3 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/plat-mxc/epit.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d3467f8..9129c9e 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -203,7 +203,7 @@ static int __init epit_clockevent_init(struct clk *timer_clk)
 
 void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
 
-- 
1.7.5.4

[PATCH V3 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/plat-mxc/epit.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d3467f8..9129c9e 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -203,7 +203,7 @@ static int __init epit_clockevent_init(struct clk *timer_clk)
 
 void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
 
-- 
1.7.5.4

[PATCH V3 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/epit.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d3467f8..9129c9e 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -203,7 +203,7 @@ static int __init epit_clockevent_init(struct clk *timer_clk)
 
 void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
 
-- 
1.7.5.4

[PATCH V3 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/system.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 9dad8dc..a667adc 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -54,7 +54,7 @@ void arch_reset(char mode, const char *cmd)
 
 		clk = clk_get_sys("imx2-wdt.0", NULL);
 		if (!IS_ERR(clk))
-			clk_enable(clk);
+			clk_prepare_enable(clk);
 		wcr_enable = (1 << 2);
 	}
 
-- 
1.7.5.4

[PATCH V3 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/system.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 9dad8dc..a667adc 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -54,7 +54,7 @@ void arch_reset(char mode, const char *cmd)
 
 		clk = clk_get_sys("imx2-wdt.0", NULL);
 		if (!IS_ERR(clk))
-			clk_enable(clk);
+			clk_prepare_enable(clk);
 		wcr_enable = (1 << 2);
 	}
 
-- 
1.7.5.4

[PATCH V3 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/system.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 9dad8dc..a667adc 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -54,7 +54,7 @@ void arch_reset(char mode, const char *cmd)
 
 		clk = clk_get_sys("imx2-wdt.0", NULL);
 		if (!IS_ERR(clk))
-			clk_enable(clk);
+			clk_prepare_enable(clk);
 		wcr_enable = (1 << 2);
 	}
 
-- 
1.7.5.4

[PATCH V3 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/audmux-v2.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 8cced35..0e51fc3 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -73,13 +73,13 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 		return -ENOMEM;
 
 	if (audmux_clk)
-		clk_enable(audmux_clk);
+		clk_prepare_enable(audmux_clk);
 
 	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
 	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
 
 	if (audmux_clk)
-		clk_disable(audmux_clk);
+		clk_disable_unprepare(audmux_clk);
 
 	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
 		       pdcr, ptcr);
@@ -172,13 +172,13 @@ int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
 		return -ENOSYS;
 
 	if (audmux_clk)
-		clk_enable(audmux_clk);
+		clk_prepare_enable(audmux_clk);
 
 	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
 	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
 
 	if (audmux_clk)
-		clk_disable(audmux_clk);
+		clk_disable_unprepare(audmux_clk);
 
 	return 0;
 }
-- 
1.7.5.4

[PATCH V3 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/audmux-v2.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 8cced35..0e51fc3 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -73,13 +73,13 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 		return -ENOMEM;
 
 	if (audmux_clk)
-		clk_enable(audmux_clk);
+		clk_prepare_enable(audmux_clk);
 
 	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
 	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
 
 	if (audmux_clk)
-		clk_disable(audmux_clk);
+		clk_disable_unprepare(audmux_clk);
 
 	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
 		       pdcr, ptcr);
@@ -172,13 +172,13 @@ int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
 		return -ENOSYS;
 
 	if (audmux_clk)
-		clk_enable(audmux_clk);
+		clk_prepare_enable(audmux_clk);
 
 	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
 	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
 
 	if (audmux_clk)
-		clk_disable(audmux_clk);
+		clk_disable_unprepare(audmux_clk);
 
 	return 0;
 }
-- 
1.7.5.4

[PATCH V3 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/plat-mxc/audmux-v2.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 8cced35..0e51fc3 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -73,13 +73,13 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 		return -ENOMEM;
 
 	if (audmux_clk)
-		clk_enable(audmux_clk);
+		clk_prepare_enable(audmux_clk);
 
 	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
 	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
 
 	if (audmux_clk)
-		clk_disable(audmux_clk);
+		clk_disable_unprepare(audmux_clk);
 
 	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
 		       pdcr, ptcr);
@@ -172,13 +172,13 @@ int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
 		return -ENOSYS;
 
 	if (audmux_clk)
-		clk_enable(audmux_clk);
+		clk_prepare_enable(audmux_clk);
 
 	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
 	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
 
 	if (audmux_clk)
-		clk_disable(audmux_clk);
+		clk_disable_unprepare(audmux_clk);
 
 	return 0;
 }
-- 
1.7.5.4

[PATCH V3 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/mach-mx5/pm-imx5.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
index 98052fc..2bdc85f 100644
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ b/arch/arm/mach-mx5/pm-imx5.c
@@ -22,7 +22,7 @@ static struct clk *gpc_dvfs_clk;
 
 static int mx5_suspend_prepare(void)
 {
-	return clk_enable(gpc_dvfs_clk);
+	return clk_prepare_enable(gpc_dvfs_clk);
 }
 
 static int mx5_suspend_enter(suspend_state_t state)
@@ -52,7 +52,7 @@ static int mx5_suspend_enter(suspend_state_t state)
 
 static void mx5_suspend_finish(void)
 {
-	clk_disable(gpc_dvfs_clk);
+	clk_disable_unprepare(gpc_dvfs_clk);
 }
 
 static int mx5_pm_valid(suspend_state_t state)
-- 
1.7.5.4

[PATCH V3 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/mach-mx5/pm-imx5.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
index 98052fc..2bdc85f 100644
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ b/arch/arm/mach-mx5/pm-imx5.c
@@ -22,7 +22,7 @@ static struct clk *gpc_dvfs_clk;
 
 static int mx5_suspend_prepare(void)
 {
-	return clk_enable(gpc_dvfs_clk);
+	return clk_prepare_enable(gpc_dvfs_clk);
 }
 
 static int mx5_suspend_enter(suspend_state_t state)
@@ -52,7 +52,7 @@ static int mx5_suspend_enter(suspend_state_t state)
 
 static void mx5_suspend_finish(void)
 {
-	clk_disable(gpc_dvfs_clk);
+	clk_disable_unprepare(gpc_dvfs_clk);
 }
 
 static int mx5_pm_valid(suspend_state_t state)
-- 
1.7.5.4

[PATCH V3 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/mach-mx5/pm-imx5.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
index 98052fc..2bdc85f 100644
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ b/arch/arm/mach-mx5/pm-imx5.c
@@ -22,7 +22,7 @@ static struct clk *gpc_dvfs_clk;
 
 static int mx5_suspend_prepare(void)
 {
-	return clk_enable(gpc_dvfs_clk);
+	return clk_prepare_enable(gpc_dvfs_clk);
 }
 
 static int mx5_suspend_enter(suspend_state_t state)
@@ -52,7 +52,7 @@ static int mx5_suspend_enter(suspend_state_t state)
 
 static void mx5_suspend_finish(void)
 {
-	clk_disable(gpc_dvfs_clk);
+	clk_disable_unprepare(gpc_dvfs_clk);
 }
 
 static int mx5_pm_valid(suspend_state_t state)
-- 
1.7.5.4

[PATCH V3 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/mach-imx/mach-mx31moboard.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 07034f4..d1a9337 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -505,7 +505,7 @@ static void mx31moboard_poweroff(void)
 	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
 
 	if (!IS_ERR(clk))
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
 
-- 
1.7.5.4

[PATCH V3 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/mach-imx/mach-mx31moboard.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 07034f4..d1a9337 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -505,7 +505,7 @@ static void mx31moboard_poweroff(void)
 	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
 
 	if (!IS_ERR(clk))
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
 
-- 
1.7.5.4

[PATCH V3 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/mach-imx/mach-mx31moboard.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 07034f4..d1a9337 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -505,7 +505,7 @@ static void mx31moboard_poweroff(void)
 	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
 
 	if (!IS_ERR(clk))
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
 
-- 
1.7.5.4

[PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/mach-mxs/system.c |    2 +-
 arch/arm/mach-mxs/timer.c  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 20ec3bd..9760a12 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
 
 	clk = clk_get_sys("rtc", NULL);
 	if (!IS_ERR(clk))
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index cace0d2..564a632 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 
 void __init mxs_timer_init(struct clk *timer_clk, int irq)
 {
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	/*
 	 * Initialize timers to a known state
-- 
1.7.5.4

[PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/mach-mxs/system.c |    2 +-
 arch/arm/mach-mxs/timer.c  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 20ec3bd..9760a12 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
 
 	clk = clk_get_sys("rtc", NULL);
 	if (!IS_ERR(clk))
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index cace0d2..564a632 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 
 void __init mxs_timer_init(struct clk *timer_clk, int irq)
 {
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	/*
 	 * Initialize timers to a known state
-- 
1.7.5.4

[PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/mach-mxs/system.c |    2 +-
 arch/arm/mach-mxs/timer.c  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 20ec3bd..9760a12 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
 
 	clk = clk_get_sys("rtc", NULL);
 	if (!IS_ERR(clk))
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index cace0d2..564a632 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 
 void __init mxs_timer_init(struct clk *timer_clk, int irq)
 {
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	/*
 	 * Initialize timers to a known state
-- 
1.7.5.4

[PATCH V3 11/14] serial: imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/tty/serial/imx.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 163fc90..8f3709f 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1390,7 +1390,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 		ret = PTR_ERR(sport->clk);
 		goto unmap;
 	}
-	clk_enable(sport->clk);
+	clk_prepare_enable(sport->clk);
 
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
@@ -1413,8 +1413,8 @@ deinit:
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 clkput:
+	clk_disable_unprepare(sport->clk);
 	clk_put(sport->clk);
-	clk_disable(sport->clk);
 unmap:
 	iounmap(sport->port.membase);
 free:
@@ -1434,11 +1434,10 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	if (sport) {
 		uart_remove_one_port(&imx_reg, &sport->port);
+		clk_disable_unprepare(sport->clk);
 		clk_put(sport->clk);
 	}
 
-	clk_disable(sport->clk);
-
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 
-- 
1.7.5.4

[PATCH V3 11/14] serial: imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/tty/serial/imx.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 163fc90..8f3709f 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1390,7 +1390,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 		ret = PTR_ERR(sport->clk);
 		goto unmap;
 	}
-	clk_enable(sport->clk);
+	clk_prepare_enable(sport->clk);
 
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
@@ -1413,8 +1413,8 @@ deinit:
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 clkput:
+	clk_disable_unprepare(sport->clk);
 	clk_put(sport->clk);
-	clk_disable(sport->clk);
 unmap:
 	iounmap(sport->port.membase);
 free:
@@ -1434,11 +1434,10 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	if (sport) {
 		uart_remove_one_port(&imx_reg, &sport->port);
+		clk_disable_unprepare(sport->clk);
 		clk_put(sport->clk);
 	}
 
-	clk_disable(sport->clk);
-
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 
-- 
1.7.5.4

[PATCH V3 11/14] serial: imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 drivers/tty/serial/imx.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 163fc90..8f3709f 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1390,7 +1390,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 		ret = PTR_ERR(sport->clk);
 		goto unmap;
 	}
-	clk_enable(sport->clk);
+	clk_prepare_enable(sport->clk);
 
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
@@ -1413,8 +1413,8 @@ deinit:
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 clkput:
+	clk_disable_unprepare(sport->clk);
 	clk_put(sport->clk);
-	clk_disable(sport->clk);
 unmap:
 	iounmap(sport->port.membase);
 free:
@@ -1434,11 +1434,10 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	if (sport) {
 		uart_remove_one_port(&imx_reg, &sport->port);
+		clk_disable_unprepare(sport->clk);
 		clk_put(sport->clk);
 	}
 
-	clk_disable(sport->clk);
-
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 
-- 
1.7.5.4

[PATCH V3 12/14] net: fec: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 drivers/net/ethernet/freescale/fec.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 1124ce0..e96fa44 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1588,7 +1588,7 @@ fec_probe(struct platform_device *pdev)
 		ret = PTR_ERR(fep->clk);
 		goto failed_clk;
 	}
-	clk_enable(fep->clk);
+	clk_prepare_enable(fep->clk);
 
 	ret = fec_enet_init(ndev);
 	if (ret)
@@ -1611,7 +1611,7 @@ failed_register:
 	fec_enet_mii_remove(fep);
 failed_mii_init:
 failed_init:
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 	clk_put(fep->clk);
 failed_clk:
 	for (i = 0; i < FEC_IRQ_NUM; i++) {
@@ -1638,7 +1638,7 @@ fec_drv_remove(struct platform_device *pdev)
 
 	fec_stop(ndev);
 	fec_enet_mii_remove(fep);
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 	clk_put(fep->clk);
 	iounmap(fep->hwp);
 	unregister_netdev(ndev);
@@ -1664,7 +1664,7 @@ fec_suspend(struct device *dev)
 		fec_stop(ndev);
 		netif_device_detach(ndev);
 	}
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 
 	return 0;
 }
@@ -1675,7 +1675,7 @@ fec_resume(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 
-	clk_enable(fep->clk);
+	clk_prepare_enable(fep->clk);
 	if (netif_running(ndev)) {
 		fec_restart(ndev, fep->full_duplex);
 		netif_device_attach(ndev);
-- 
1.7.5.4

[PATCH V3 12/14] net: fec: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 drivers/net/ethernet/freescale/fec.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 1124ce0..e96fa44 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1588,7 +1588,7 @@ fec_probe(struct platform_device *pdev)
 		ret = PTR_ERR(fep->clk);
 		goto failed_clk;
 	}
-	clk_enable(fep->clk);
+	clk_prepare_enable(fep->clk);
 
 	ret = fec_enet_init(ndev);
 	if (ret)
@@ -1611,7 +1611,7 @@ failed_register:
 	fec_enet_mii_remove(fep);
 failed_mii_init:
 failed_init:
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 	clk_put(fep->clk);
 failed_clk:
 	for (i = 0; i < FEC_IRQ_NUM; i++) {
@@ -1638,7 +1638,7 @@ fec_drv_remove(struct platform_device *pdev)
 
 	fec_stop(ndev);
 	fec_enet_mii_remove(fep);
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 	clk_put(fep->clk);
 	iounmap(fep->hwp);
 	unregister_netdev(ndev);
@@ -1664,7 +1664,7 @@ fec_suspend(struct device *dev)
 		fec_stop(ndev);
 		netif_device_detach(ndev);
 	}
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 
 	return 0;
 }
@@ -1675,7 +1675,7 @@ fec_resume(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 
-	clk_enable(fep->clk);
+	clk_prepare_enable(fep->clk);
 	if (netif_running(ndev)) {
 		fec_restart(ndev, fep->full_duplex);
 		netif_device_attach(ndev);
-- 
1.7.5.4

[PATCH V3 12/14] net: fec: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 drivers/net/ethernet/freescale/fec.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 1124ce0..e96fa44 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1588,7 +1588,7 @@ fec_probe(struct platform_device *pdev)
 		ret = PTR_ERR(fep->clk);
 		goto failed_clk;
 	}
-	clk_enable(fep->clk);
+	clk_prepare_enable(fep->clk);
 
 	ret = fec_enet_init(ndev);
 	if (ret)
@@ -1611,7 +1611,7 @@ failed_register:
 	fec_enet_mii_remove(fep);
 failed_mii_init:
 failed_init:
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 	clk_put(fep->clk);
 failed_clk:
 	for (i = 0; i < FEC_IRQ_NUM; i++) {
@@ -1638,7 +1638,7 @@ fec_drv_remove(struct platform_device *pdev)
 
 	fec_stop(ndev);
 	fec_enet_mii_remove(fep);
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 	clk_put(fep->clk);
 	iounmap(fep->hwp);
 	unregister_netdev(ndev);
@@ -1664,7 +1664,7 @@ fec_suspend(struct device *dev)
 		fec_stop(ndev);
 		netif_device_detach(ndev);
 	}
-	clk_disable(fep->clk);
+	clk_disable_unprepare(fep->clk);
 
 	return 0;
 }
@@ -1675,7 +1675,7 @@ fec_resume(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 
-	clk_enable(fep->clk);
+	clk_prepare_enable(fep->clk);
 	if (netif_running(ndev)) {
 		fec_restart(ndev, fep->full_duplex);
 		netif_device_attach(ndev);
-- 
1.7.5.4

[PATCH V3 13/14] i2c: imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/i2c/busses/i2c-imx.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 58832e5..8d1ab6f 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -196,7 +196,7 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
-	clk_enable(i2c_imx->clk);
+	clk_prepare_enable(i2c_imx->clk);
 	writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
 	/* Enable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
@@ -245,7 +245,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 
 	/* Disable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
-	clk_disable(i2c_imx->clk);
+	clk_disable_unprepare(i2c_imx->clk);
 }
 
 static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
-- 
1.7.5.4

[PATCH V3 13/14] i2c: imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/i2c/busses/i2c-imx.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 58832e5..8d1ab6f 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -196,7 +196,7 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
-	clk_enable(i2c_imx->clk);
+	clk_prepare_enable(i2c_imx->clk);
 	writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
 	/* Enable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
@@ -245,7 +245,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 
 	/* Disable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
-	clk_disable(i2c_imx->clk);
+	clk_disable_unprepare(i2c_imx->clk);
 }
 
 static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
-- 
1.7.5.4

[PATCH V3 13/14] i2c: imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 drivers/i2c/busses/i2c-imx.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 58832e5..8d1ab6f 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -196,7 +196,7 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
-	clk_enable(i2c_imx->clk);
+	clk_prepare_enable(i2c_imx->clk);
 	writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
 	/* Enable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
@@ -245,7 +245,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 
 	/* Disable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
-	clk_disable(i2c_imx->clk);
+	clk_disable_unprepare(i2c_imx->clk);
 }
 
 static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
-- 
1.7.5.4

[PATCH V3 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ae57769..f1ae37e 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -462,7 +462,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		err = PTR_ERR(clk);
 		goto err_clk_get;
 	}
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	pltfm_host->clk = clk;
 
 	if (!is_imx25_esdhc(imx_data))
@@ -550,7 +550,7 @@ no_card_detect_irq:
 		gpio_free(boarddata->wp_gpio);
 no_card_detect_pin:
 no_board_data:
-	clk_disable(pltfm_host->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 err_clk_get:
 	kfree(imx_data);
@@ -577,7 +577,7 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
 		gpio_free(boarddata->cd_gpio);
 	}
 
-	clk_disable(pltfm_host->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 	kfree(imx_data);
 
-- 
1.7.5.4

[PATCH V3 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ae57769..f1ae37e 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -462,7 +462,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		err = PTR_ERR(clk);
 		goto err_clk_get;
 	}
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	pltfm_host->clk = clk;
 
 	if (!is_imx25_esdhc(imx_data))
@@ -550,7 +550,7 @@ no_card_detect_irq:
 		gpio_free(boarddata->wp_gpio);
 no_card_detect_pin:
 no_board_data:
-	clk_disable(pltfm_host->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 err_clk_get:
 	kfree(imx_data);
@@ -577,7 +577,7 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
 		gpio_free(boarddata->cd_gpio);
 	}
 
-	clk_disable(pltfm_host->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 	kfree(imx_data);
 
-- 
1.7.5.4

[PATCH V3 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare

[Richard Zhao]

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ae57769..f1ae37e 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -462,7 +462,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		err = PTR_ERR(clk);
 		goto err_clk_get;
 	}
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	pltfm_host->clk = clk;
 
 	if (!is_imx25_esdhc(imx_data))
@@ -550,7 +550,7 @@ no_card_detect_irq:
 		gpio_free(boarddata->wp_gpio);
 no_card_detect_pin:
 no_board_data:
-	clk_disable(pltfm_host->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 err_clk_get:
 	kfree(imx_data);
@@ -577,7 +577,7 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
 		gpio_free(boarddata->cd_gpio);
 	}
 
-	clk_disable(pltfm_host->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 	kfree(imx_data);
 
-- 
1.7.5.4

Re: [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Marek Vasut]

> Signed-off-by: Richard Zhao <richard.zhao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  arch/arm/mach-mxs/system.c |    2 +-
>  arch/arm/mach-mxs/timer.c  |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
> index 20ec3bd..9760a12 100644
> --- a/arch/arm/mach-mxs/system.c
> +++ b/arch/arm/mach-mxs/system.c
> @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
> 
>  	clk = clk_get_sys("rtc", NULL);
>  	if (!IS_ERR(clk))
> -		clk_enable(clk);
> +		clk_prepare_enable(clk);
> 
>  	return 0;
>  }
> diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
> index cace0d2..564a632 100644
> --- a/arch/arm/mach-mxs/timer.c
> +++ b/arch/arm/mach-mxs/timer.c
> @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk
> *timer_clk)
> 
>  void __init mxs_timer_init(struct clk *timer_clk, int irq)
>  {
> -	clk_enable(timer_clk);
> +	clk_prepare_enable(timer_clk);
> 
>  	/*
>  	 * Initialize timers to a known state

Hi Richard,

I just came across this, will this also help solve the mxs problem with mutex 
lock begin done in atomic context in clk_enable/disable()?

M

[PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Marek Vasut]

> Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
> ---
>  arch/arm/mach-mxs/system.c |    2 +-
>  arch/arm/mach-mxs/timer.c  |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
> index 20ec3bd..9760a12 100644
> --- a/arch/arm/mach-mxs/system.c
> +++ b/arch/arm/mach-mxs/system.c
> @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
> 
>  	clk = clk_get_sys("rtc", NULL);
>  	if (!IS_ERR(clk))
> -		clk_enable(clk);
> +		clk_prepare_enable(clk);
> 
>  	return 0;
>  }
> diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
> index cace0d2..564a632 100644
> --- a/arch/arm/mach-mxs/timer.c
> +++ b/arch/arm/mach-mxs/timer.c
> @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk
> *timer_clk)
> 
>  void __init mxs_timer_init(struct clk *timer_clk, int irq)
>  {
> -	clk_enable(timer_clk);
> +	clk_prepare_enable(timer_clk);
> 
>  	/*
>  	 * Initialize timers to a known state

Hi Richard,

I just came across this, will this also help solve the mxs problem with mutex 
lock begin done in atomic context in clk_enable/disable()?

M

Re: [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Richard Zhao]

On Mon, Dec 19, 2011 at 11:21:41PM +0100, Marek Vasut wrote:
> > Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
> > ---
> >  arch/arm/mach-mxs/system.c |    2 +-
> >  arch/arm/mach-mxs/timer.c  |    2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
> > index 20ec3bd..9760a12 100644
> > --- a/arch/arm/mach-mxs/system.c
> > +++ b/arch/arm/mach-mxs/system.c
> > @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
> > 
> >  	clk = clk_get_sys("rtc", NULL);
> >  	if (!IS_ERR(clk))
> > -		clk_enable(clk);
> > +		clk_prepare_enable(clk);
> > 
> >  	return 0;
> >  }
> > diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
> > index cace0d2..564a632 100644
> > --- a/arch/arm/mach-mxs/timer.c
> > +++ b/arch/arm/mach-mxs/timer.c
> > @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk
> > *timer_clk)
> > 
> >  void __init mxs_timer_init(struct clk *timer_clk, int irq)
> >  {
> > -	clk_enable(timer_clk);
> > +	clk_prepare_enable(timer_clk);
> > 
> >  	/*
> >  	 * Initialize timers to a known state
> 
> Hi Richard,
> 
> I just came across this, will this also help solve the mxs problem with mutex 
> lock begin done in atomic context in clk_enable/disable()?
No, It's for converting to generic clock framwork.
You can look at Mike's generic clock patches. clk_hw_ops.enable/disable
definitely can not sleep.
On register side, there' two way to protect register:
 - use a global spin lock
 - only use spin lock wherever gate register share the same one with
   other non-gate register.

Thanks
Richard
> 
> M
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Re: [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Richard Zhao]

On Mon, Dec 19, 2011 at 11:21:41PM +0100, Marek Vasut wrote:
> > Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
> > ---
> >  arch/arm/mach-mxs/system.c |    2 +-
> >  arch/arm/mach-mxs/timer.c  |    2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
> > index 20ec3bd..9760a12 100644
> > --- a/arch/arm/mach-mxs/system.c
> > +++ b/arch/arm/mach-mxs/system.c
> > @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
> > 
> >  	clk = clk_get_sys("rtc", NULL);
> >  	if (!IS_ERR(clk))
> > -		clk_enable(clk);
> > +		clk_prepare_enable(clk);
> > 
> >  	return 0;
> >  }
> > diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
> > index cace0d2..564a632 100644
> > --- a/arch/arm/mach-mxs/timer.c
> > +++ b/arch/arm/mach-mxs/timer.c
> > @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk
> > *timer_clk)
> > 
> >  void __init mxs_timer_init(struct clk *timer_clk, int irq)
> >  {
> > -	clk_enable(timer_clk);
> > +	clk_prepare_enable(timer_clk);
> > 
> >  	/*
> >  	 * Initialize timers to a known state
> 
> Hi Richard,
> 
> I just came across this, will this also help solve the mxs problem with mutex 
> lock begin done in atomic context in clk_enable/disable()?
No, It's for converting to generic clock framwork.
You can look at Mike's generic clock patches. clk_hw_ops.enable/disable
definitely can not sleep.
On register side, there' two way to protect register:
 - use a global spin lock
 - only use spin lock wherever gate register share the same one with
   other non-gate register.

Thanks
Richard
> 
> M
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Richard Zhao]

On Mon, Dec 19, 2011 at 11:21:41PM +0100, Marek Vasut wrote:
> > Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
> > ---
> >  arch/arm/mach-mxs/system.c |    2 +-
> >  arch/arm/mach-mxs/timer.c  |    2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
> > index 20ec3bd..9760a12 100644
> > --- a/arch/arm/mach-mxs/system.c
> > +++ b/arch/arm/mach-mxs/system.c
> > @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
> > 
> >  	clk = clk_get_sys("rtc", NULL);
> >  	if (!IS_ERR(clk))
> > -		clk_enable(clk);
> > +		clk_prepare_enable(clk);
> > 
> >  	return 0;
> >  }
> > diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
> > index cace0d2..564a632 100644
> > --- a/arch/arm/mach-mxs/timer.c
> > +++ b/arch/arm/mach-mxs/timer.c
> > @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk
> > *timer_clk)
> > 
> >  void __init mxs_timer_init(struct clk *timer_clk, int irq)
> >  {
> > -	clk_enable(timer_clk);
> > +	clk_prepare_enable(timer_clk);
> > 
> >  	/*
> >  	 * Initialize timers to a known state
> 
> Hi Richard,
> 
> I just came across this, will this also help solve the mxs problem with mutex 
> lock begin done in atomic context in clk_enable/disable()?
No, It's for converting to generic clock framwork.
You can look at Mike's generic clock patches. clk_hw_ops.enable/disable
definitely can not sleep.
On register side, there' two way to protect register:
 - use a global spin lock
 - only use spin lock wherever gate register share the same one with
   other non-gate register.

Thanks
Richard
> 
> M
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Re: [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Shawn Guo]

Hi Sascha,

Can you drop this patch from your tree?  This patch is not complete
even for mxs platform/arch code, and will conflict with my mxs
clk-prepare series.

-- 
Regards,
Shawn

On Fri, Nov 11, 2011 at 06:50:33PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
> ---
>  arch/arm/mach-mxs/system.c |    2 +-
>  arch/arm/mach-mxs/timer.c  |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
> index 20ec3bd..9760a12 100644
> --- a/arch/arm/mach-mxs/system.c
> +++ b/arch/arm/mach-mxs/system.c
> @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
>  
>  	clk = clk_get_sys("rtc", NULL);
>  	if (!IS_ERR(clk))
> -		clk_enable(clk);
> +		clk_prepare_enable(clk);
>  
>  	return 0;
>  }
> diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
> index cace0d2..564a632 100644
> --- a/arch/arm/mach-mxs/timer.c
> +++ b/arch/arm/mach-mxs/timer.c
> @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
>  
>  void __init mxs_timer_init(struct clk *timer_clk, int irq)
>  {
> -	clk_enable(timer_clk);
> +	clk_prepare_enable(timer_clk);
>  
>  	/*
>  	 * Initialize timers to a known state
> -- 
> 1.7.5.4

Re: [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Shawn Guo]

Hi Sascha,

Can you drop this patch from your tree?  This patch is not complete
even for mxs platform/arch code, and will conflict with my mxs
clk-prepare series.

-- 
Regards,
Shawn

On Fri, Nov 11, 2011 at 06:50:33PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
> ---
>  arch/arm/mach-mxs/system.c |    2 +-
>  arch/arm/mach-mxs/timer.c  |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
> index 20ec3bd..9760a12 100644
> --- a/arch/arm/mach-mxs/system.c
> +++ b/arch/arm/mach-mxs/system.c
> @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
>  
>  	clk = clk_get_sys("rtc", NULL);
>  	if (!IS_ERR(clk))
> -		clk_enable(clk);
> +		clk_prepare_enable(clk);
>  
>  	return 0;
>  }
> diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
> index cace0d2..564a632 100644
> --- a/arch/arm/mach-mxs/timer.c
> +++ b/arch/arm/mach-mxs/timer.c
> @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
>  
>  void __init mxs_timer_init(struct clk *timer_clk, int irq)
>  {
> -	clk_enable(timer_clk);
> +	clk_prepare_enable(timer_clk);
>  
>  	/*
>  	 * Initialize timers to a known state
> -- 
> 1.7.5.4

[PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare

[Shawn Guo]

Hi Sascha,

Can you drop this patch from your tree?  This patch is not complete
even for mxs platform/arch code, and will conflict with my mxs
clk-prepare series.

-- 
Regards,
Shawn

On Fri, Nov 11, 2011 at 06:50:33PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
> ---
>  arch/arm/mach-mxs/system.c |    2 +-
>  arch/arm/mach-mxs/timer.c  |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
> index 20ec3bd..9760a12 100644
> --- a/arch/arm/mach-mxs/system.c
> +++ b/arch/arm/mach-mxs/system.c
> @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void)
>  
>  	clk = clk_get_sys("rtc", NULL);
>  	if (!IS_ERR(clk))
> -		clk_enable(clk);
> +		clk_prepare_enable(clk);
>  
>  	return 0;
>  }
> diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
> index cace0d2..564a632 100644
> --- a/arch/arm/mach-mxs/timer.c
> +++ b/arch/arm/mach-mxs/timer.c
> @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
>  
>  void __init mxs_timer_init(struct clk *timer_clk, int irq)
>  {
> -	clk_enable(timer_clk);
> +	clk_prepare_enable(timer_clk);
>  
>  	/*
>  	 * Initialize timers to a known state
> -- 
> 1.7.5.4