* [U-Boot] [PATCH V2 0/6] i.mx: add the initial i.mx6q core/board support
@ 2011-11-18 7:11 Jason Liu
2011-11-18 7:11 ` [U-Boot] [PATCH V2 1/6] i.mx: introduce the armv7/imx-common folder Jason Liu
` (5 more replies)
0 siblings, 6 replies; 20+ messages in thread
From: Jason Liu @ 2011-11-18 7:11 UTC (permalink / raw)
To: u-boot
This patch-set add the initial support for freescale i.mx6q support.
freescale i.mx6q is a quad core built on arm cortex_a9 complex.
The patch-set has been tested ok on freescale i.mx6q Armadillo2 board and also
make sure it does not break i.mx5 support
The v1 patch-set has also been tested Ok by: Dirk Behme
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Jason Liu (6):
i.mx: introduce the armv7/imx-common folder
i.mx: add the initial support for freescale i.MX6Q processor
i.mx: mxc_gpio: add the i.mx6q support
i.mx: serial_mxc: add the i.mx6q support
i.mx: fsl_esdhc: add the i.mx6q support
i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
---
v2: see detailed change log in each commit
MAINTAINERS | 1 +
Makefile | 7 +
arch/arm/cpu/armv7/imx-common/Makefile | 47 +
arch/arm/cpu/armv7/imx-common/cpu.c | 108 ++
arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
arch/arm/cpu/armv7/mx5/Makefile | 2 +-
arch/arm/cpu/armv7/mx5/soc.c | 77 -
arch/arm/cpu/armv7/mx6/Makefile | 48 +
arch/arm/cpu/armv7/mx6/clock.c | 366 +++++
arch/arm/cpu/armv7/mx6/iomux-v3.c | 71 +
.../cpu/armv7/{mx5/speed.c => mx6/lowlevel_init.S} | 27 +-
arch/arm/cpu/armv7/mx6/soc.c | 93 ++
arch/arm/include/asm/arch-mx6/ccm_regs.h | 894 +++++++++++
.../mx5/speed.c => include/asm/arch-mx6/clock.h} | 45 +-
.../mx5/speed.c => include/asm/arch-mx6/gpio.h} | 30 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 234 +++
arch/arm/include/asm/arch-mx6/iomux-v3.h | 103 ++
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683 ++++++++++++++++++++
.../speed.c => include/asm/arch-mx6/sys_proto.h} | 31 +-
board/freescale/mx6qarm2/Makefile | 42 +
board/freescale/mx6qarm2/imximage.cfg | 167 ++
board/freescale/mx6qarm2/mx6qarm2.c | 155 ++
boards.cfg | 1 +
drivers/gpio/mxc_gpio.c | 4 +-
drivers/mmc/fsl_esdhc.c | 12 +-
drivers/serial/serial_mxc.c | 10 +-
include/configs/mx6qarm2.h | 162 ++
28 files changed, 4268 insertions(+), 169 deletions(-)
create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
create mode 100644 arch/arm/cpu/armv7/imx-common/cpu.c
copy arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
mode change 100644 => 100755
create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
copy arch/arm/cpu/armv7/{mx5/speed.c => mx6/lowlevel_init.S} (58%)
create mode 100644 arch/arm/cpu/armv7/mx6/soc.c
create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/clock.h} (59%)
copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/gpio.h} (64%)
create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
rename arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/sys_proto.h} (65%)
create mode 100644 board/freescale/mx6qarm2/Makefile
create mode 100644 board/freescale/mx6qarm2/imximage.cfg
create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
create mode 100644 include/configs/mx6qarm2.h
--
1.7.4.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 1/6] i.mx: introduce the armv7/imx-common folder
2011-11-18 7:11 [U-Boot] [PATCH V2 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
@ 2011-11-18 7:11 ` Jason Liu
2011-11-21 13:40 ` Stefano Babic
2011-11-18 7:11 ` [U-Boot] [PATCH V2 2/6] i.mx: add the initial support for freescale i.MX6Q processor Jason Liu
` (4 subsequent siblings)
5 siblings, 1 reply; 20+ messages in thread
From: Jason Liu @ 2011-11-18 7:11 UTC (permalink / raw)
To: u-boot
In order to support the coming MX6 platform and to reducde
the duplicated code, we had better move some common files
or functions to the imx-common folder for sharing.
This patch does the following:
- move speed.c file from armv7/mx5/speed.c to armv7/imx-common/speed.c
- move armv7/mx5/timer.c to armv7/imx-common/timer.c, no any new feature
added but just fix the checkpatch errors in the old file and remove
the CONFIG_SYS_MX5_CLK32 reference in the file
- create one new file cpu.c file to store the common function with i.mx5/6
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc:Stefano Babic <sbabic@denx.de>
---
V2:extend the commit message to reflect all the changes in the patch
rename cpu_info.c to cpu.c file under imx-common as Stefano comments
---
Makefile | 7 ++
arch/arm/cpu/armv7/imx-common/Makefile | 47 ++++++++++
arch/arm/cpu/armv7/imx-common/cpu.c | 108 ++++++++++++++++++++++++
arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 ++--
arch/arm/cpu/armv7/mx5/Makefile | 2 +-
arch/arm/cpu/armv7/mx5/soc.c | 77 -----------------
7 files changed, 172 insertions(+), 86 deletions(-)
diff --git a/Makefile b/Makefile
index 294c762..9672a10 100644
--- a/Makefile
+++ b/Makefile
@@ -300,6 +300,13 @@ ifeq ($(SOC),omap4)
LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif
+ifeq ($(SOC),mx5)
+LIBS += $(CPUDIR)/imx-common/libimx-common.o
+endif
+ifeq ($(SOC),mx6)
+LIBS += $(CPUDIR)/imx-common/libimx-common.o
+endif
+
ifeq ($(SOC),s5pc1xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
diff --git a/arch/arm/cpu/armv7/imx-common/Makefile b/arch/arm/cpu/armv7/imx-common/Makefile
new file mode 100644
index 0000000..e5ff375
--- /dev/null
+++ b/arch/arm/cpu/armv7/imx-common/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)libimx-common.o
+
+COBJS = timer.o cpu.o speed.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/imx-common/cpu.c b/arch/arm/cpu/armv7/imx-common/cpu.c
new file mode 100644
index 0000000..1e30ae5
--- /dev/null
+++ b/arch/arm/cpu/armv7/imx-common/cpu.c
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+
+static char *get_reset_cause(void)
+{
+ u32 cause;
+ struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+
+ cause = readl(&src_regs->srsr);
+ writel(cause, &src_regs->srsr);
+
+ switch (cause) {
+ case 0x00001:
+ return "POR";
+ case 0x00004:
+ return "CSU";
+ case 0x00008:
+ return "IPP USER";
+ case 0x00010:
+ return "WDOG";
+ case 0x00020:
+ return "JTAG HIGH-Z";
+ case 0x00040:
+ return "JTAG SW";
+ case 0x10000:
+ return "WARM BOOT";
+ default:
+ return "unknown reset";
+ }
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ u32 cpurev;
+
+ cpurev = get_cpu_rev();
+ printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n",
+ (cpurev & 0xFF000) >> 12,
+ (cpurev & 0x000F0) >> 4,
+ (cpurev & 0x0000F) >> 0,
+ mxc_get_clock(MXC_ARM_CLK) / 1000000);
+ printf("Reset cause: %s\n", get_reset_cause());
+ return 0;
+}
+#endif
+
+int cpu_eth_init(bd_t *bis)
+{
+ int rc = -ENODEV;
+
+#if defined(CONFIG_FEC_MXC)
+ rc = fecmxc_initialize(bis);
+#endif
+
+ return rc;
+}
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_ESDHC
+ return fsl_esdhc_mmc_init(bis);
+#else
+ return 0;
+#endif
+}
+
+void reset_cpu(ulong addr)
+{
+ __raw_writew(4, WDOG1_BASE_ADDR);
+}
diff --git a/arch/arm/cpu/armv7/mx5/speed.c b/arch/arm/cpu/armv7/imx-common/speed.c
similarity index 100%
rename from arch/arm/cpu/armv7/mx5/speed.c
rename to arch/arm/cpu/armv7/imx-common/speed.c
diff --git a/arch/arm/cpu/armv7/mx5/timer.c b/arch/arm/cpu/armv7/imx-common/timer.c
old mode 100644
new mode 100755
similarity index 84%
rename from arch/arm/cpu/armv7/mx5/timer.c
rename to arch/arm/cpu/armv7/imx-common/timer.c
index 2544b08..98e9f4a
--- a/arch/arm/cpu/armv7/mx5/timer.c
+++ b/arch/arm/cpu/armv7/imx-common/timer.c
@@ -39,10 +39,11 @@ struct mxc_gpt {
static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR;
/* General purpose timers bitfields */
-#define GPTCR_SWR (1<<15) /* Software reset */
-#define GPTCR_FRR (1<<9) /* Freerun / restart */
-#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */
-#define GPTCR_TEN (1) /* Timer enable */
+#define GPTCR_SWR (1 << 15) /* Software reset */
+#define GPTCR_FRR (1 << 9) /* Freerun / restart */
+#define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */
+#define GPTCR_TEN 1 /* Timer enable */
+#define CLK_32KHZ 32768 /* 32Khz input */
DECLARE_GLOBAL_DATA_PTR;
@@ -68,7 +69,7 @@ int timer_init(void)
__raw_writel(i | GPTCR_CLKSOURCE_32 | GPTCR_TEN, &cur_gpt->control);
val = __raw_readl(&cur_gpt->counter);
- lastinc = val / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ);
+ lastinc = val / (CLK_32KHZ / CONFIG_SYS_HZ);
timestamp = 0;
return 0;
@@ -77,11 +78,11 @@ int timer_init(void)
ulong get_timer_masked(void)
{
ulong val = __raw_readl(&cur_gpt->counter);
- val /= (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ);
+ val /= (CLK_32KHZ / CONFIG_SYS_HZ);
if (val >= lastinc)
timestamp += (val - lastinc);
else
- timestamp += ((0xFFFFFFFF / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ))
+ timestamp += ((0xFFFFFFFF / (CLK_32KHZ / CONFIG_SYS_HZ))
- lastinc) + val;
lastinc = val;
return timestamp;
@@ -96,7 +97,7 @@ ulong get_timer(ulong base)
void __udelay(unsigned long usec)
{
unsigned long now, start, tmo;
- tmo = usec * (CONFIG_SYS_MX5_CLK32 / 1000) / 1000;
+ tmo = usec * (CLK_32KHZ / 1000) / 1000;
if (!tmo)
tmo = 1;
diff --git a/arch/arm/cpu/armv7/mx5/Makefile b/arch/arm/cpu/armv7/mx5/Makefile
index e8be9c9..ecd1184 100644
--- a/arch/arm/cpu/armv7/mx5/Makefile
+++ b/arch/arm/cpu/armv7/mx5/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS = soc.o clock.o iomux.o timer.o speed.o
+COBJS = soc.o clock.o iomux.o
SOBJS = lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c
index cf12ba8..1533dd8 100644
--- a/arch/arm/cpu/armv7/mx5/soc.c
+++ b/arch/arm/cpu/armv7/mx5/soc.c
@@ -31,10 +31,6 @@
#include <asm/errno.h>
#include <asm/io.h>
-#ifdef CONFIG_FSL_ESDHC
-#include <fsl_esdhc.h>
-#endif
-
#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
#error "CPU_TYPE not defined"
#endif
@@ -75,61 +71,6 @@ u32 get_cpu_rev(void)
return system_rev;
}
-static char *get_reset_cause(void)
-{
- u32 cause;
- struct src *src_regs = (struct src *)SRC_BASE_ADDR;
-
- cause = readl(&src_regs->srsr);
- writel(cause, &src_regs->srsr);
-
- switch (cause) {
- case 0x00001:
- return "POR";
- case 0x00004:
- return "CSU";
- case 0x00008:
- return "IPP USER";
- case 0x00010:
- return "WDOG";
- case 0x00020:
- return "JTAG HIGH-Z";
- case 0x00040:
- return "JTAG SW";
- case 0x10000:
- return "WARM BOOT";
- default:
- return "unknown reset";
- }
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
- u32 cpurev;
-
- cpurev = get_cpu_rev();
- printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n",
- (cpurev & 0xFF000) >> 12,
- (cpurev & 0x000F0) >> 4,
- (cpurev & 0x0000F) >> 0,
- mxc_get_clock(MXC_ARM_CLK) / 1000000);
- printf("Reset cause: %s\n", get_reset_cause());
- return 0;
-}
-#endif
-
-int cpu_eth_init(bd_t *bis)
-{
- int rc = -ENODEV;
-
-#if defined(CONFIG_FEC_MXC)
- rc = fecmxc_initialize(bis);
-#endif
-
- return rc;
-}
-
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(unsigned char *mac)
{
@@ -144,19 +85,6 @@ void imx_get_mac_from_fuse(unsigned char *mac)
}
#endif
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(bd_t *bis)
-{
-#ifdef CONFIG_FSL_ESDHC
- return fsl_esdhc_mmc_init(bis);
-#else
- return 0;
-#endif
-}
-
void set_chipselect_size(int const cs_size)
{
unsigned int reg;
@@ -187,8 +115,3 @@ void set_chipselect_size(int const cs_size)
writel(reg, &iomuxc_regs->gpr1);
}
-
-void reset_cpu(ulong addr)
-{
- __raw_writew(4, WDOG1_BASE_ADDR);
-}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 2/6] i.mx: add the initial support for freescale i.MX6Q processor
2011-11-18 7:11 [U-Boot] [PATCH V2 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
2011-11-18 7:11 ` [U-Boot] [PATCH V2 1/6] i.mx: introduce the armv7/imx-common folder Jason Liu
@ 2011-11-18 7:11 ` Jason Liu
2011-11-21 14:44 ` Stefano Babic
2011-11-18 7:11 ` [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support Jason Liu
` (3 subsequent siblings)
5 siblings, 1 reply; 20+ messages in thread
From: Jason Liu @ 2011-11-18 7:11 UTC (permalink / raw)
To: u-boot
i.MX6Q is freescale quad core processors with ARM cortex_a9 complex.
This patch is to add the initial support for this processor.
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc:Stefano Babic <sbabic@denx.de>
---
v2:put aips init to c code as Marek suggest
remove the parenthesis such as (2)
remork get_usdhcx_clk() to get_usdhc_clk(port)
remove the iomux base init and assign it staticly
correct the chip rev print-message(rev1.0)
---
arch/arm/cpu/armv7/mx6/Makefile | 48 +
arch/arm/cpu/armv7/mx6/clock.c | 366 +++++++
arch/arm/cpu/armv7/mx6/iomux-v3.c | 71 ++
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 24 +
arch/arm/cpu/armv7/mx6/soc.c | 93 ++
arch/arm/include/asm/arch-mx6/ccm_regs.h | 894 +++++++++++++++
arch/arm/include/asm/arch-mx6/clock.h | 50 +
arch/arm/include/asm/arch-mx6/gpio.h | 35 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 234 ++++
arch/arm/include/asm/arch-mx6/iomux-v3.h | 103 ++
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683 +++++++++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h | 38 +
12 files changed, 3639 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
new file mode 100644
index 0000000..b0da028
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx6/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS = soc.o clock.o iomux-v3.o
+SOBJS = lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
new file mode 100644
index 0000000..262958f
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/ccm_regs.h>
+#include <asm/arch/clock.h>
+
+enum pll_clocks {
+ PLL_SYS, /* System PLL */
+ PLL_BUS, /* System Bus PLL*/
+ PLL_USBOTG, /* OTG USB PLL */
+ PLL_ENET, /* ENET PLL */
+};
+
+struct imx_ccm_reg *imx_ccm = (struct imx_ccm_reg *)CCM_BASE_ADDR;
+
+static u32 decode_pll(enum pll_clocks pll, u32 infreq)
+{
+ u32 div;
+
+ switch (pll) {
+ case PLL_SYS:
+ div = __raw_readl(&imx_ccm->analog_pll_sys);
+ div &= BM_ANADIG_PLL_SYS_DIV_SELECT;
+
+ return infreq * (div >> 1);
+ case PLL_BUS:
+ div = __raw_readl(&imx_ccm->analog_pll_528);
+ div &= BM_ANADIG_PLL_528_DIV_SELECT;
+
+ return infreq * (20 + (div << 1));
+ case PLL_USBOTG:
+ div = __raw_readl(&imx_ccm->analog_usb1_pll_480_ctrl);
+ div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT;
+
+ return infreq * (20 + (div << 1));
+ case PLL_ENET:
+ div = __raw_readl(&imx_ccm->analog_pll_enet);
+ div &= BM_ANADIG_PLL_ENET_DIV_SELECT;
+
+ return (div == 3 ? 125000000 : 25000000 * (div << 1));
+ default:
+ return 0;
+ }
+ /* NOTREACHED */
+}
+
+static u32 get_mcu_main_clk(void)
+{
+ u32 reg, freq;
+
+ reg = __raw_readl(&imx_ccm->cacrr);
+ reg &= MXC_CCM_CACRR_ARM_PODF_MASK;
+ reg >>= MXC_CCM_CACRR_ARM_PODF_OFFSET;
+ freq = decode_pll(PLL_SYS, CONFIG_SYS_MX6_HCLK);
+
+ return freq / (reg + 1);
+}
+
+static u32 get_periph_clk(void)
+{
+ u32 reg, freq = 0;
+
+ reg = __raw_readl(&imx_ccm->cbcdr);
+ if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) {
+ reg = __raw_readl(&imx_ccm->cbcmr);
+ reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK;
+ reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET;
+
+ switch (reg) {
+ case 0:
+ freq = decode_pll(PLL_USBOTG, CONFIG_SYS_MX6_HCLK);
+ break;
+ case 1:
+ case 2:
+ freq = CONFIG_SYS_MX6_HCLK;
+ break;
+ default:
+ break;
+ }
+ } else {
+ reg = __raw_readl(&imx_ccm->cbcmr);
+ reg &= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK;
+ reg >>= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET;
+
+ switch (reg) {
+ case 0:
+ freq = decode_pll(PLL_BUS, CONFIG_SYS_MX6_HCLK);
+ break;
+ case 1:
+ freq = PLL2_PFD2_FREQ;
+ break;
+ case 2:
+ freq = PLL2_PFD0_FREQ;
+ break;
+ case 3:
+ freq = PLL2_PFD2_DIV_FREQ;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return freq;
+}
+
+
+static u32 get_ahb_clk(void)
+{
+ u32 reg, ahb_podf;
+
+ reg = __raw_readl(&imx_ccm->cbcdr);
+ reg &= MXC_CCM_CBCDR_AHB_PODF_MASK;
+ ahb_podf = reg >> MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+
+ return get_periph_clk() / (ahb_podf + 1);
+}
+
+static u32 get_ipg_clk(void)
+{
+ u32 reg, ipg_podf;
+
+ reg = __raw_readl(&imx_ccm->cbcdr);
+ reg &= MXC_CCM_CBCDR_IPG_PODF_MASK;
+ ipg_podf = reg >> MXC_CCM_CBCDR_IPG_PODF_OFFSET;
+
+ return get_ahb_clk() / (ipg_podf + 1);
+}
+
+static u32 get_ipg_per_clk(void)
+{
+ u32 reg, perclk_podf;
+
+ reg = __raw_readl(&imx_ccm->cscmr1);
+ perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;
+
+ return get_ipg_clk() / (perclk_podf + 1);
+}
+
+static u32 get_uart_clk(void)
+{
+ u32 reg, uart_podf;
+
+ reg = __raw_readl(&imx_ccm->cscdr1);
+ reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
+ uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
+
+ return PLL3_80M / (uart_podf + 1);
+}
+
+
+static u32 get_cspi_clk(void)
+{
+ u32 reg, cspi_podf;
+
+ reg = __raw_readl(&imx_ccm->cscdr2);
+ reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
+ cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
+
+ return PLL3_60M / (cspi_podf + 1);
+}
+
+static u32 get_axi_clk(void)
+{
+ u32 root_freq, axi_podf;
+ u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
+
+ axi_podf = cbcdr & MXC_CCM_CBCDR_AXI_PODF_MASK;
+ axi_podf >>= MXC_CCM_CBCDR_AXI_PODF_OFFSET;
+
+ if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
+ if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
+ root_freq = PLL2_PFD2_FREQ;
+ else
+ root_freq = PLL3_PFD1_FREQ;;
+ } else
+ root_freq = get_periph_clk();
+
+ return root_freq / (axi_podf + 1);
+}
+
+static u32 get_emi_slow_clk(void)
+{
+ u32 emi_clk_sel, emi_slow_pof, cscmr1, root_freq = 0;
+
+ cscmr1 = __raw_readl(&imx_ccm->cscmr1);
+ emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK;
+ emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET;
+ emi_slow_pof = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
+ emi_slow_pof >>= MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET;
+
+ switch (emi_clk_sel) {
+ case 0:
+ root_freq = get_axi_clk();
+ break;
+ case 1:
+ root_freq = decode_pll(PLL_USBOTG, CONFIG_SYS_MX6_HCLK);
+ break;
+ case 2:
+ root_freq = PLL2_PFD2_FREQ;
+ break;
+ case 3:
+ root_freq = PLL2_PFD0_FREQ;
+ break;
+ }
+
+ return root_freq / (emi_slow_pof + 1);
+}
+
+static u32 get_mmdc_ch0_clk(void)
+{
+ u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
+ u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
+ MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
+
+ return get_periph_clk() / (mmdc_ch0_podf + 1);
+}
+static u32 get_usdhc_clk(u32 port)
+{
+ u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0;
+ u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1);
+ u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1);
+
+ switch (port) {
+ case 0:
+ usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >>
+ MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET;
+ clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC1_CLK_SEL;
+
+ break;
+ case 1:
+ usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC2_PODF_MASK) >>
+ MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET;
+ clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC2_CLK_SEL;
+
+ break;
+ case 2:
+ usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC3_PODF_MASK) >>
+ MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET;
+ clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC3_CLK_SEL;
+
+ break;
+ case 3:
+ usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC4_PODF_MASK) >>
+ MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET;
+ clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC4_CLK_SEL;
+
+ break;
+ default:
+ break;
+ }
+
+ if (clk_sel)
+ root_freq = PLL2_PFD0_FREQ;
+ else
+ root_freq = PLL2_PFD2_FREQ;
+
+ return root_freq / (usdhc_podf + 1);
+}
+
+u32 imx_get_uartclk(void)
+{
+ return get_uart_clk();
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_ARM_CLK:
+ return get_mcu_main_clk();
+ case MXC_PER_CLK:
+ return get_periph_clk();
+ case MXC_AHB_CLK:
+ return get_ahb_clk();
+ case MXC_IPG_CLK:
+ return get_ipg_clk();
+ case MXC_IPG_PERCLK:
+ return get_ipg_per_clk();
+ case MXC_UART_CLK:
+ return get_uart_clk();
+ case MXC_CSPI_CLK:
+ return get_cspi_clk();
+ case MXC_AXI_CLK:
+ return get_axi_clk();
+ case MXC_EMI_SLOW_CLK:
+ return get_emi_slow_clk();
+ case MXC_DDR_CLK:
+ return get_mmdc_ch0_clk();
+ case MXC_ESDHC_CLK:
+ return get_usdhc_clk(0);
+ case MXC_ESDHC2_CLK:
+ return get_usdhc_clk(1);
+ case MXC_ESDHC3_CLK:
+ return get_usdhc_clk(2);
+ case MXC_ESDHC4_CLK:
+ return get_usdhc_clk(3);
+ case MXC_SATA_CLK:
+ return get_ahb_clk();
+ default:
+ break;
+ }
+
+ return -1;
+}
+
+/*
+ * Dump some core clockes.
+ */
+int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ u32 freq;
+ freq = decode_pll(PLL_SYS, CONFIG_SYS_MX6_HCLK);
+ printf("PLL_SYS %8d MHz\n", freq / 1000000);
+ freq = decode_pll(PLL_BUS, CONFIG_SYS_MX6_HCLK);
+ printf("PLL_BUS %8d MHz\n", freq / 1000000);
+ freq = decode_pll(PLL_USBOTG, CONFIG_SYS_MX6_HCLK);
+ printf("PLL_OTG %8d MHz\n", freq / 1000000);
+ freq = decode_pll(PLL_ENET, CONFIG_SYS_MX6_HCLK);
+ printf("PLL_NET %8d MHz\n", freq / 1000000);
+
+ printf("\n");
+ printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+ printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
+ printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
+ printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+ printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
+ printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
+ printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
+ printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
+ printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
+ printf("USDHC4 %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000);
+ printf("EMI SLOW %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000);
+ printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
+
+ return 0;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+ clocks, CONFIG_SYS_MAXARGS, 1, do_mx6_showclocks,
+ "display clocks",
+ ""
+);
diff --git a/arch/arm/cpu/armv7/mx6/iomux-v3.c b/arch/arm/cpu/armv7/mx6/iomux-v3.c
new file mode 100644
index 0000000..8785532
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx6/iomux-v3.c
@@ -0,0 +1,71 @@
+/*
+ * Based on the iomux-v3.c from Linux kernel:
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6x_pins.h>
+#include <asm/arch/iomux-v3.h>
+
+static void *base = (void *)IOMUXC_BASE_ADDR;
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
+{
+ u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
+ u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+ u32 sel_input_ofs =
+ (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
+ u32 sel_input =
+ (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
+ u32 pad_ctrl_ofs =
+ (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
+ u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
+
+ if (mux_ctrl_ofs)
+ __raw_writel(mux_mode, base + mux_ctrl_ofs);
+
+ if (sel_input_ofs)
+ __raw_writel(sel_input, base + sel_input_ofs);
+
+ if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
+ __raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+
+ return 0;
+}
+
+int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
+{
+ iomux_v3_cfg_t *p = pad_list;
+ int i;
+ int ret;
+
+ for (i = 0; i < count; i++) {
+ ret = imx_iomux_v3_setup_pad(*p);
+ if (ret)
+ return ret;
+ p++;
+ }
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/cpu/armv7/mx6/lowlevel_init.S
new file mode 100644
index 0000000..1864356
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx6/lowlevel_init.S
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+.section ".text.init", "x"
+
+.globl lowlevel_init
+lowlevel_init:
+
+ mov pc, lr
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
new file mode 100644
index 0000000..dbf8b93
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+u32 get_cpu_rev(void)
+{
+ int system_rev = 0x61000 | CHIP_REV_1_0;
+
+ return system_rev;
+}
+#ifdef CONFIG_ARCH_CPU_INIT
+void init_aips(void)
+{
+ u32 reg = AIPS1_ON_BASE_ADDR;
+
+ /*
+ * Set all MPROTx to be non-bufferable, trusted for R/W,
+ * not forced to user-mode.
+ */
+ writel(0x77777777, reg + 0x00);
+ writel(0x77777777, reg + 0x04);
+
+ writel(0x00000000, reg + 0x40);
+ writel(0x00000000, reg + 0x44);
+ writel(0x00000000, reg + 0x48);
+ writel(0x00000000, reg + 0x4c);
+ writel(0x00000000, reg + 0x50);
+
+ reg = AIPS2_ON_BASE_ADDR;
+ writel(0x77777777, reg + 0x00);
+ writel(0x77777777, reg + 0x04);
+
+ writel(0x00000000, reg + 0x40);
+ writel(0x00000000, reg + 0x44);
+ writel(0x00000000, reg + 0x48);
+ writel(0x00000000, reg + 0x4c);
+ writel(0x00000000, reg + 0x50);
+}
+
+int arch_cpu_init(void)
+{
+ init_aips();
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_FEC_MXC)
+void imx_get_mac_from_fuse(unsigned char *mac)
+{
+ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+ struct fuse_bank *bank = &iim->bank[4];
+ struct fuse_bank4_regs *fuse =
+ (struct fuse_bank4_regs *)bank->fuse_regs;
+
+ u32 mac_lo = readl(&fuse->mac_addr_low);
+ u32 mac_hi = readl(&fuse->mac_addr_high);
+
+ *(u32 *)mac = mac_lo;
+
+ mac[4] = mac_hi & 0xff;
+ mac[5] = (mac_hi >> 8) & 0xff;
+
+}
+#endif
diff --git a/arch/arm/include/asm/arch-mx6/ccm_regs.h b/arch/arm/include/asm/arch-mx6/ccm_regs.h
new file mode 100644
index 0000000..b55cb49
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/ccm_regs.h
@@ -0,0 +1,894 @@
+/*
+ * Freescale ANADIG Register Definitions
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MX6_CCM_REGS_H__
+#define __ARCH_ARM_MACH_MX6_CCM_REGS_H__
+
+struct imx_ccm_reg {
+ u32 ccr; /* 0x0000 */
+ u32 ccdr;
+ u32 csr;
+ u32 ccsr;
+ u32 cacrr; /* 0x0010*/
+ u32 cbcdr;
+ u32 cbcmr;
+ u32 cscmr1;
+ u32 cscmr2; /* 0x0020 */
+ u32 cscdr1;
+ u32 cs1cdr;
+ u32 cs2cdr;
+ u32 cdcdr; /* 0x0030 */
+ u32 chscdr;
+ u32 cscdr2;
+ u32 cscdr3;
+ u32 cscdr4; /* 0x0040 */
+ u32 resv0;
+ u32 cdhipr;
+ u32 cdcr;
+ u32 ctor; /* 0x0050 */
+ u32 clpcr;
+ u32 cisr;
+ u32 cimr;
+ u32 ccosr; /* 0x0060 */
+ u32 cgpr;
+ u32 CCGR0;
+ u32 CCGR1;
+ u32 CCGR2; /* 0x0070 */
+ u32 CCGR3;
+ u32 CCGR4;
+ u32 CCGR5;
+ u32 CCGR6; /* 0x0080 */
+ u32 CCGR7;
+ u32 cmeor;
+ u32 resv[0xfdd];
+ u32 analog_pll_sys; /* 0x4000 */
+ u32 analog_pll_sys_set;
+ u32 analog_pll_sys_clr;
+ u32 analog_pll_sys_tog;
+ u32 analog_usb1_pll_480_ctrl; /* 0x4010 */
+ u32 analog_usb1_pll_480_ctrl_set;
+ u32 analog_usb1_pll_480_ctrl_clr;
+ u32 analog_usb1_pll_480_ctrl_tog;
+ u32 analog_reserved0[4];
+ u32 analog_pll_528; /* 0x4030 */
+ u32 analog_pll_528_set;
+ u32 analog_pll_528_clr;
+ u32 analog_pll_528_tog;
+ u32 analog_pll_528_ss; /* 0x4040 */
+ u32 analog_reserved1[3];
+ u32 analog_pll_528_num; /* 0x4050 */
+ u32 analog_reserved2[3];
+ u32 analog_pll_528_denom; /* 0x4060 */
+ u32 analog_reserved3[3];
+ u32 analog_pll_audio; /* 0x4070 */
+ u32 analog_pll_audio_set;
+ u32 analog_pll_audio_clr;
+ u32 analog_pll_audio_tog;
+ u32 analog_pll_audio_num; /* 0x4080*/
+ u32 analog_reserved4[3];
+ u32 analog_pll_audio_denom; /* 0x4090 */
+ u32 analog_reserved5[3];
+ u32 analog_pll_video; /* 0x40a0 */
+ u32 analog_pll_video_set;
+ u32 analog_pll_video_clr;
+ u32 analog_pll_video_tog;
+ u32 analog_pll_video_num; /* 0x40b0 */
+ u32 analog_reserved6[3];
+ u32 analog_pll_vedio_denon; /* 0x40c0 */
+ u32 analog_reserved7[7];
+ u32 analog_pll_enet; /* 0x40e0 */
+ u32 analog_pll_enet_set;
+ u32 analog_pll_enet_clr;
+ u32 analog_pll_enet_tog;
+ u32 analog_pfd_480; /* 0x40f0 */
+ u32 analog_pfd_480_set;
+ u32 analog_pfd_480_clr;
+ u32 analog_pfd_480_tog;
+ u32 analog_pfd_528; /* 0x4100 */
+ u32 analog_pfd_528_set;
+ u32 analog_pfd_528_clr;
+ u32 analog_pfd_528_tog;
+};
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_RBC_EN (1 << 27)
+#define MXC_CCM_CCR_REG_BYPASS_CNT_MASK (0x3F << 21)
+#define MXC_CCM_CCR_REG_BYPASS_CNT_OFFSET 21
+#define MXC_CCM_CCR_WB_COUNT_MASK 0x7
+#define MXC_CCM_CCR_WB_COUNT_OFFSET (1 << 16)
+#define MXC_CCM_CCR_COSC_EN (1 << 12)
+#define MXC_CCM_CCR_OSCNT_MASK 0xFF
+#define MXC_CCM_CCR_OSCNT_OFFSET 0
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_MMDC_CH1_HS_MASK (1 << 16)
+#define MXC_CCM_CCDR_MMDC_CH0_HS_MASK (1 << 17)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSC_READY (1 << 5)
+#define MXC_CCM_CSR_REF_EN_B (1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_PDF_540M_AUTO_DIS (1 << 15)
+#define MXC_CCM_CCSR_PDF_720M_AUTO_DIS (1 << 14)
+#define MXC_CCM_CCSR_PDF_454M_AUTO_DIS (1 << 13)
+#define MXC_CCM_CCSR_PDF_508M_AUTO_DIS (1 << 12)
+#define MXC_CCM_CCSR_PDF_594M_AUTO_DIS (1 << 11)
+#define MXC_CCM_CCSR_PDF_352M_AUTO_DIS (1 << 10)
+#define MXC_CCM_CCSR_PDF_400M_AUTO_DIS (1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL (1 << 8)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2)
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET 0
+#define MXC_CCM_CACRR_ARM_PODF_MASK 0x7
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK (0x7 << 27)
+#define MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET 27
+#define MXC_CCM_CBCDR_PERIPH2_CLK2_SEL (1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (1 << 25)
+#define MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK (0x7 << 19)
+#define MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET 19
+#define MXC_CCM_CBCDR_AXI_PODF_MASK (0x7 << 16)
+#define MXC_CCM_CBCDR_AXI_PODF_OFFSET 16
+#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET 10
+#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET 8
+#define MXC_CCM_CBCDR_AXI_ALT_SEL (1 << 7)
+#define MXC_CCM_CBCDR_AXI_SEL (1 << 6)
+#define MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK (0x7 << 3)
+#define MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET 3
+#define MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK (0x7 << 0)
+#define MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET 0
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_GPU3D_SHADER_PODF_MASK (0x7 << 29)
+#define MXC_CCM_CBCMR_GPU3D_SHADER_PODF_OFFSET 29
+#define MXC_CCM_CBCMR_GPU3D_CORE_PODF_MASK (0x7 << 26)
+#define MXC_CCM_CBCMR_GPU3D_CORE_PODF_OFFSET 26
+#define MXC_CCM_CBCMR_GPU2D_CORE_PODF_MASK (0x7 << 23)
+#define MXC_CCM_CBCMR_GPU2D_CORE_PODF_OFFSET 23
+#define MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK (0x3 << 21)
+#define MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET 21
+#define MXC_CCM_CBCMR_PRE_PERIPH2_CLK2_SEL (1 << 20)
+#define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK (0x3 << 18)
+#define MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET 18
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 16)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET 16
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET 14
+#define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK (0x3 << 12)
+#define MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET 12
+#define MXC_CCM_CBCMR_VDOAXI_CLK_SEL (1 << 11)
+#define MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL (1 << 10)
+#define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_MASK (0x3 << 8)
+#define MXC_CCM_CBCMR_GPU3D_SHADER_CLK_SEL_OFFSET 8
+#define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_MASK (0x3 << 4)
+#define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_OFFSET 4
+#define MXC_CCM_CBCMR_GPU3D_AXI_CLK_SEL (1 << 1)
+#define MXC_CCM_CBCMR_GPU2D_AXI_CLK_SEL (1 << 0)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK (0x3 << 29)
+#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET 29
+#define MXC_CCM_CSCMR1_ACLK_EMI_MASK (0x3 << 27)
+#define MXC_CCM_CSCMR1_ACLK_EMI_OFFSET 27
+#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK (0x7 << 23)
+#define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET 23
+#define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK (0x7 << 20)
+#define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET 20
+#define MXC_CCM_CSCMR1_USDHC4_CLK_SEL (1 << 19)
+#define MXC_CCM_CSCMR1_USDHC3_CLK_SEL (1 << 18)
+#define MXC_CCM_CSCMR1_USDHC2_CLK_SEL (1 << 17)
+#define MXC_CCM_CSCMR1_USDHC1_CLK_SEL (1 << 16)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL_OFFSET 14
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET 12
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 10)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET 10
+#define MXC_CCM_CSCMR1_PERCLK_PODF_MASK 0x3F
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_ESAI_PRE_SEL_MASK (0x3 << 19)
+#define MXC_CCM_CSCMR2_ESAI_PRE_SEL_OFFSET 19
+#define MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV (1 << 11)
+#define MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV (1 << 10)
+#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3F << 2)
+#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 2
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_VPU_AXI_PODF_MASK (0x7 << 25)
+#define MXC_CCM_CSCDR1_VPU_AXI_PODF_OFFSET 25
+#define MXC_CCM_CSCDR1_USDHC4_PODF_MASK (0x7 << 22)
+#define MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET 22
+#define MXC_CCM_CSCDR1_USDHC3_PODF_MASK (0x7 << 19)
+#define MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET 19
+#define MXC_CCM_CSCDR1_USDHC2_PODF_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET 16
+#define MXC_CCM_CSCDR1_USDHC1_PODF_MASK (0x7 << 11)
+#define MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET 11
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET 8
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
+
+/* Define the bits in register CS1CDR */
+#define MXC_CCM_CS1CDR_ESAI_CLK_PODF_MASK (0x3F << 25)
+#define MXC_CCM_CS1CDR_ESAI_CLK_PODF_OFFSET 25
+#define MXC_CCM_CS1CDR_SSI3_CLK_PODF_MASK (0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI3_CLK_PODF_OFFSET 16
+#define MXC_CCM_CS1CDR_ESAI_CLK_PRED_MASK (0x3 << 9)
+#define MXC_CCM_CS1CDR_ESAI_CLK_PRED_OFFSET 9
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET 6
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK 0x3F
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET 0
+
+/* Define the bits in register CS2CDR */
+#define MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK (0x3F << 21)
+#define MXC_CCM_CS2CDR_ENFC_CLK_PODF_OFFSET 21
+#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK (0x7 << 18)
+#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_OFFSET 18
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16
+#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12)
+#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12
+#define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK (0x7 << 9)
+#define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET 9
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET 6
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK 0x3F
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET 0
+
+/* Define the bits in register CDCDR */
+#define MXC_CCM_CDCDR_HSI_TX_PODF_MASK (0x7 << 29)
+#define MXC_CCM_CDCDR_HSI_TX_PODF_OFFSET 29
+#define MXC_CCM_CDCDR_HSI_TX_CLK_SEL (1 << 28)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET 25
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x7 << 19)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET 19
+#define MXC_CCM_CDCDR_SPDIF0_CLK_SEL_MASK (0x3 << 20)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_SEL_OFFSET 20
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 12)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET 12
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x7 << 9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET 9
+#define MXC_CCM_CDCDR_SPDIF1_CLK_SEL_MASK (0x3 << 7)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_SEL_OFFSET 7
+
+/* Define the bits in register CHSCCDR */
+#define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_MASK (0x7 << 15)
+#define MXC_CCM_CHSCCDR_IPU1_DI1_PRE_CLK_SEL_OFFSET 15
+#define MXC_CCM_CHSCCDR_IPU1_DI1_PODF_MASK (0x7 << 12)
+#define MXC_CCM_CHSCCDR_IPU1_DI1_PODF_OFFSET 12
+#define MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_MASK (0x7 << 9)
+#define MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET 9
+#define MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK (0x7 << 6)
+#define MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET 6
+#define MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK (0x7 << 3)
+#define MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET 3
+#define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK (0x7)
+#define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET 0
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK (0x3F << 19)
+#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19
+#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15)
+#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET 15
+#define MXC_CCM_CHSCCDR_IPU2_DI1_PODF_MASK (0x7 << 12)
+#define MXC_CCM_CHSCCDR_IPU2_DI1_PODF_OFFSET 12
+#define MXC_CCM_CHSCCDR_IPU2_DI1_CLK_SEL_MASK (0x7 << 9)
+#define MXC_CCM_CHSCCDR_IPU2_DI1_CLK_SEL_OFFSET 9
+#define MXC_CCM_CHSCCDR_IPU2_DI0_PRE_CLK_SEL_MASK (0x7 << 6)
+#define MXC_CCM_CHSCCDR_IPU2_DI0_PRE_CLK_SEL_OFFSET 6
+#define MXC_CCM_CHSCCDR_IPU2_DI0_PODF_MASK (0x7 << 3)
+#define MXC_CCM_CHSCCDR_IPU2_DI0_PODF_OFFSET 3
+#define MXC_CCM_CHSCCDR_IPU2_DI0_CLK_SEL_MASK 0x7
+#define MXC_CCM_CHSCCDR_IPU2_DI0_CLK_SEL_OFFSET 0
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_IPU2_HSP_PODF_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR3_IPU2_HSP_PODF_OFFSET 16
+#define MXC_CCM_CSCDR3_IPU2_HSP_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CSCDR3_IPU2_HSP_CLK_SEL_OFFSET 14
+#define MXC_CCM_CSCDR3_IPU1_HSP_PODF_MASK (0x7 << 11)
+#define MXC_CCM_CSCDR3_IPU1_HSP_PODF_OFFSET 11
+#define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_MASK (0x3 << 9)
+#define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_OFFSET 9
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
+#define MXC_CCM_CDHIPR_MMDC_CH0_PODF_BUSY (1 << 4)
+#define MXC_CCM_CDHIPR_PERIPH2_CLK_SEL_BUSY (1 << 3)
+#define MXC_CCM_CDHIPR_MMDC_CH1_PODF_BUSY (1 << 2)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 1)
+#define MXC_CCM_CDHIPR_AXI_PODF_BUSY 1
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_MASK_L2CC_IDLE (1 << 27)
+#define MXC_CCM_CLPCR_MASK_SCU_IDLE (1 << 26)
+#define MXC_CCM_CLPCR_MASK_CORE3_WFI (1 << 25)
+#define MXC_CCM_CLPCR_MASK_CORE2_WFI (1 << 24)
+#define MXC_CCM_CLPCR_MASK_CORE1_WFI (1 << 23)
+#define MXC_CCM_CLPCR_MASK_CORE0_WFI (1 << 22)
+#define MXC_CCM_CLPCR_BYP_MMDC_CH1_LPM_HS (1 << 21)
+#define MXC_CCM_CLPCR_BYP_MMDC_CH0_LPM_HS (1 << 19)
+#define MXC_CCM_CLPCR_WB_CORE_AT_LPM (1 << 17)
+#define MXC_CCM_CLPCR_WB_PER_AT_LPM (1 << 17)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN (1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9
+#define MXC_CCM_CLPCR_VSTBY (1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC (1 << 7)
+#define MXC_CCM_CLPCR_SBYOS (1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (1 << 5)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET 3
+#define MXC_CCM_CLPCR_BYPASS_PMIC_VFUNC_READY (1 << 2)
+#define MXC_CCM_CLPCR_LPM_MASK 0x3
+#define MXC_CCM_CLPCR_LPM_OFFSET 0
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED (1 << 26)
+#define MXC_CCM_CISR_MMDC_CH0_PODF_LOADED (1 << 23)
+#define MXC_CCM_CISR_PERIPH_CLK_SEL_LOADED (1 << 22)
+#define MXC_CCM_CISR_MMDC_CH1_PODF_LOADED (1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED (1 << 20)
+#define MXC_CCM_CISR_PERIPH2_CLK_SEL_LOADED (1 << 19)
+#define MXC_CCM_CISR_AXI_PODF_LOADED (1 << 17)
+#define MXC_CCM_CISR_COSC_READY (1 << 6)
+#define MXC_CCM_CISR_LRF_PLL 1
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (1 << 26)
+#define MXC_CCM_CIMR_MASK_MMDC_CH0_PODF_LOADED (1 << 23)
+#define MXC_CCM_CIMR_MASK_PERIPH_CLK_SEL_LOADED (1 << 22)
+#define MXC_CCM_CIMR_MASK_MMDC_CH1_PODF_LOADED (1 << 21)
+#define MXC_CCM_CIMR_MASK_AHB_PODF_LOADED (1 << 20)
+#define MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED (1 << 22)
+#define MXC_CCM_CIMR_MASK_AXI_PODF_LOADED (1 << 17)
+#define MXC_CCM_CIMR_MASK_COSC_READY (1 << 6)
+#define MXC_CCM_CIMR_MASK_LRF_PLL 1
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET 21
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET 16
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16)
+#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET 4
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK 0xF
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET 0
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (1 << 4)
+#define MXC_CCM_CGPR_MMDC_EXT_CLK_DIS (1 << 2)
+#define MXC_CCM_CGPR_PMIC_DELAY_SCALER 1
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGR_CG_MASK 3
+
+#define MXC_CCM_CCGR0_CG15_OFFSET 30
+#define MXC_CCM_CCGR0_CG15_MASK (0x3 << 30)
+#define MXC_CCM_CCGR0_CG14_OFFSET 28
+#define MXC_CCM_CCGR0_CG14_MASK (0x3 << 28)
+#define MXC_CCM_CCGR0_CG13_OFFSET 26
+#define MXC_CCM_CCGR0_CG13_MASK (0x3 << 26)
+#define MXC_CCM_CCGR0_CG12_OFFSET 24
+#define MXC_CCM_CCGR0_CG12_MASK (0x3 << 24)
+#define MXC_CCM_CCGR0_CG11_OFFSET 22
+#define MXC_CCM_CCGR0_CG11_MASK (0x3 << 22)
+#define MXC_CCM_CCGR0_CG10_OFFSET 20
+#define MXC_CCM_CCGR0_CG10_MASK (0x3 << 20)
+#define MXC_CCM_CCGR0_CG9_OFFSET 18
+#define MXC_CCM_CCGR0_CG9_MASK (0x3 << 18)
+#define MXC_CCM_CCGR0_CG8_OFFSET 16
+#define MXC_CCM_CCGR0_CG8_MASK (0x3 << 16)
+#define MXC_CCM_CCGR0_CG7_OFFSET 14
+#define MXC_CCM_CCGR0_CG6_OFFSET 12
+#define MXC_CCM_CCGR0_CG5_OFFSET 10
+#define MXC_CCM_CCGR0_CG5_MASK (0x3 << 10)
+#define MXC_CCM_CCGR0_CG4_OFFSET 8
+#define MXC_CCM_CCGR0_CG4_MASK (0x3 << 8)
+#define MXC_CCM_CCGR0_CG3_OFFSET 6
+#define MXC_CCM_CCGR0_CG3_MASK (0x3 << 6)
+#define MXC_CCM_CCGR0_CG2_OFFSET 4
+#define MXC_CCM_CCGR0_CG2_MASK (0x3 << 4)
+#define MXC_CCM_CCGR0_CG1_OFFSET 2
+#define MXC_CCM_CCGR0_CG1_MASK (0x3 << 2)
+#define MXC_CCM_CCGR0_CG0_OFFSET 0
+#define MXC_CCM_CCGR0_CG0_MASK 3
+
+#define MXC_CCM_CCGR1_CG15_OFFSET 30
+#define MXC_CCM_CCGR1_CG14_OFFSET 28
+#define MXC_CCM_CCGR1_CG13_OFFSET 26
+#define MXC_CCM_CCGR1_CG12_OFFSET 24
+#define MXC_CCM_CCGR1_CG11_OFFSET 22
+#define MXC_CCM_CCGR1_CG10_OFFSET 20
+#define MXC_CCM_CCGR1_CG9_OFFSET 18
+#define MXC_CCM_CCGR1_CG8_OFFSET 16
+#define MXC_CCM_CCGR1_CG7_OFFSET 14
+#define MXC_CCM_CCGR1_CG6_OFFSET 12
+#define MXC_CCM_CCGR1_CG5_OFFSET 10
+#define MXC_CCM_CCGR1_CG4_OFFSET 8
+#define MXC_CCM_CCGR1_CG3_OFFSET 6
+#define MXC_CCM_CCGR1_CG2_OFFSET 4
+#define MXC_CCM_CCGR1_CG1_OFFSET 2
+#define MXC_CCM_CCGR1_CG0_OFFSET 0
+
+#define MXC_CCM_CCGR2_CG15_OFFSET 30
+#define MXC_CCM_CCGR2_CG14_OFFSET 28
+#define MXC_CCM_CCGR2_CG13_OFFSET 26
+#define MXC_CCM_CCGR2_CG12_OFFSET 24
+#define MXC_CCM_CCGR2_CG11_OFFSET 22
+#define MXC_CCM_CCGR2_CG10_OFFSET 20
+#define MXC_CCM_CCGR2_CG9_OFFSET 18
+#define MXC_CCM_CCGR2_CG8_OFFSET 16
+#define MXC_CCM_CCGR2_CG7_OFFSET 14
+#define MXC_CCM_CCGR2_CG6_OFFSET 12
+#define MXC_CCM_CCGR2_CG5_OFFSET 10
+#define MXC_CCM_CCGR2_CG4_OFFSET 8
+#define MXC_CCM_CCGR2_CG3_OFFSET 6
+#define MXC_CCM_CCGR2_CG2_OFFSET 4
+#define MXC_CCM_CCGR2_CG1_OFFSET 2
+#define MXC_CCM_CCGR2_CG0_OFFSET 0
+
+#define MXC_CCM_CCGR3_CG15_OFFSET 30
+#define MXC_CCM_CCGR3_CG14_OFFSET 28
+#define MXC_CCM_CCGR3_CG13_OFFSET 26
+#define MXC_CCM_CCGR3_CG12_OFFSET 24
+#define MXC_CCM_CCGR3_CG11_OFFSET 22
+#define MXC_CCM_CCGR3_CG10_OFFSET 20
+#define MXC_CCM_CCGR3_CG9_OFFSET 18
+#define MXC_CCM_CCGR3_CG8_OFFSET 16
+#define MXC_CCM_CCGR3_CG7_OFFSET 14
+#define MXC_CCM_CCGR3_CG6_OFFSET 12
+#define MXC_CCM_CCGR3_CG5_OFFSET 10
+#define MXC_CCM_CCGR3_CG4_OFFSET 8
+#define MXC_CCM_CCGR3_CG3_OFFSET 6
+#define MXC_CCM_CCGR3_CG2_OFFSET 4
+#define MXC_CCM_CCGR3_CG1_OFFSET 2
+#define MXC_CCM_CCGR3_CG0_OFFSET 0
+
+#define MXC_CCM_CCGR4_CG15_OFFSET 30
+#define MXC_CCM_CCGR4_CG14_OFFSET 28
+#define MXC_CCM_CCGR4_CG13_OFFSET 26
+#define MXC_CCM_CCGR4_CG12_OFFSET 24
+#define MXC_CCM_CCGR4_CG11_OFFSET 22
+#define MXC_CCM_CCGR4_CG10_OFFSET 20
+#define MXC_CCM_CCGR4_CG9_OFFSET 18
+#define MXC_CCM_CCGR4_CG8_OFFSET 16
+#define MXC_CCM_CCGR4_CG7_OFFSET 14
+#define MXC_CCM_CCGR4_CG6_OFFSET 12
+#define MXC_CCM_CCGR4_CG5_OFFSET 10
+#define MXC_CCM_CCGR4_CG4_OFFSET 8
+#define MXC_CCM_CCGR4_CG3_OFFSET 6
+#define MXC_CCM_CCGR4_CG2_OFFSET 4
+#define MXC_CCM_CCGR4_CG1_OFFSET 2
+#define MXC_CCM_CCGR4_CG0_OFFSET 0
+
+#define MXC_CCM_CCGR5_CG15_OFFSET 30
+#define MXC_CCM_CCGR5_CG14_OFFSET 28
+#define MXC_CCM_CCGR5_CG14_MASK (0x3 << 28)
+#define MXC_CCM_CCGR5_CG13_OFFSET 26
+#define MXC_CCM_CCGR5_CG13_MASK (0x3 << 26)
+#define MXC_CCM_CCGR5_CG12_OFFSET 24
+#define MXC_CCM_CCGR5_CG12_MASK (0x3 << 24)
+#define MXC_CCM_CCGR5_CG11_OFFSET 22
+#define MXC_CCM_CCGR5_CG11_MASK (0x3 << 22)
+#define MXC_CCM_CCGR5_CG10_OFFSET 20
+#define MXC_CCM_CCGR5_CG10_MASK (0x3 << 20)
+#define MXC_CCM_CCGR5_CG9_OFFSET 18
+#define MXC_CCM_CCGR5_CG9_MASK (0x3 << 18)
+#define MXC_CCM_CCGR5_CG8_OFFSET 16
+#define MXC_CCM_CCGR5_CG8_MASK (0x3 << 16)
+#define MXC_CCM_CCGR5_CG7_OFFSET 14
+#define MXC_CCM_CCGR5_CG7_MASK (0x3 << 14)
+#define MXC_CCM_CCGR5_CG6_OFFSET 12
+#define MXC_CCM_CCGR5_CG6_MASK (0x3 << 12)
+#define MXC_CCM_CCGR5_CG5_OFFSET 10
+#define MXC_CCM_CCGR5_CG4_OFFSET 8
+#define MXC_CCM_CCGR5_CG3_OFFSET 6
+#define MXC_CCM_CCGR5_CG2_OFFSET 4
+#define MXC_CCM_CCGR5_CG2_MASK (0x3 << 4)
+#define MXC_CCM_CCGR5_CG1_OFFSET 2
+#define MXC_CCM_CCGR5_CG0_OFFSET 0
+
+#define MXC_CCM_CCGR6_CG15_OFFSET 30
+#define MXC_CCM_CCGR6_CG14_OFFSET 28
+#define MXC_CCM_CCGR6_CG14_MASK (0x3 << 28)
+#define MXC_CCM_CCGR6_CG13_OFFSET 26
+#define MXC_CCM_CCGR6_CG13_MASK (0x3 << 26)
+#define MXC_CCM_CCGR6_CG12_OFFSET 24
+#define MXC_CCM_CCGR6_CG12_MASK (0x3 << 24)
+#define MXC_CCM_CCGR6_CG11_OFFSET 22
+#define MXC_CCM_CCGR6_CG11_MASK (0x3 << 22)
+#define MXC_CCM_CCGR6_CG10_OFFSET 20
+#define MXC_CCM_CCGR6_CG10_MASK (0x3 << 20)
+#define MXC_CCM_CCGR6_CG9_OFFSET 18
+#define MXC_CCM_CCGR6_CG9_MASK (0x3 << 18)
+#define MXC_CCM_CCGR6_CG8_OFFSET 16
+#define MXC_CCM_CCGR6_CG8_MASK (0x3 << 16)
+#define MXC_CCM_CCGR6_CG7_OFFSET 14
+#define MXC_CCM_CCGR6_CG7_MASK (0x3 << 14)
+#define MXC_CCM_CCGR6_CG6_OFFSET 12
+#define MXC_CCM_CCGR6_CG6_MASK (0x3 << 12)
+#define MXC_CCM_CCGR6_CG5_OFFSET 10
+#define MXC_CCM_CCGR6_CG4_OFFSET 8
+#define MXC_CCM_CCGR6_CG3_OFFSET 6
+#define MXC_CCM_CCGR6_CG2_OFFSET 4
+#define MXC_CCM_CCGR6_CG2_MASK (0x3 << 4)
+#define MXC_CCM_CCGR6_CG1_OFFSET 2
+#define MXC_CCM_CCGR6_CG0_OFFSET 0
+
+#define MXC_CCM_CCGR7_CG15_OFFSET 30
+#define MXC_CCM_CCGR7_CG14_OFFSET 28
+#define MXC_CCM_CCGR7_CG14_MASK (0x3 << 28)
+#define MXC_CCM_CCGR7_CG13_OFFSET 26
+#define MXC_CCM_CCGR7_CG13_MASK (0x3 << 26)
+#define MXC_CCM_CCGR7_CG12_OFFSET 24
+#define MXC_CCM_CCGR7_CG12_MASK (0x3 << 24)
+#define MXC_CCM_CCGR7_CG11_OFFSET 22
+#define MXC_CCM_CCGR7_CG11_MASK (0x3 << 22)
+#define MXC_CCM_CCGR7_CG10_OFFSET 20
+#define MXC_CCM_CCGR7_CG10_MASK (0x3 << 20)
+#define MXC_CCM_CCGR7_CG9_OFFSET 18
+#define MXC_CCM_CCGR7_CG9_MASK (0x3 << 18)
+#define MXC_CCM_CCGR7_CG8_OFFSET 16
+#define MXC_CCM_CCGR7_CG8_MASK (0x3 << 16)
+#define MXC_CCM_CCGR7_CG7_OFFSET 14
+#define MXC_CCM_CCGR7_CG7_MASK (0x3 << 14)
+#define MXC_CCM_CCGR7_CG6_OFFSET 12
+#define MXC_CCM_CCGR7_CG6_MASK (0x3 << 12)
+#define MXC_CCM_CCGR7_CG5_OFFSET 10
+#define MXC_CCM_CCGR7_CG4_OFFSET 8
+#define MXC_CCM_CCGR7_CG3_OFFSET 6
+#define MXC_CCM_CCGR7_CG2_OFFSET 4
+#define MXC_CCM_CCGR7_CG2_MASK (0x3 << 4)
+#define MXC_CCM_CCGR7_CG1_OFFSET 2
+#define MXC_CCM_CCGR7_CG0_OFFSET 0
+#define BM_ANADIG_PLL_SYS_LOCK 0x80000000
+#define BP_ANADIG_PLL_SYS_RSVD0 20
+#define BM_ANADIG_PLL_SYS_RSVD0 0x7FF00000
+#define BF_ANADIG_PLL_SYS_RSVD0(v) \
+ (((v) << 20) & BM_ANADIG_PLL_SYS_RSVD0)
+#define BM_ANADIG_PLL_SYS_PLL_SEL 0x00080000
+#define BM_ANADIG_PLL_SYS_LVDS_24MHZ_SEL 0x00040000
+#define BM_ANADIG_PLL_SYS_LVDS_SEL 0x00020000
+#define BM_ANADIG_PLL_SYS_BYPASS 0x00010000
+#define BP_ANADIG_PLL_SYS_BYPASS_CLK_SRC 14
+#define BM_ANADIG_PLL_SYS_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_SYS_BYPASS_CLK_SRC(v) \
+ (((v) << 14) & BM_ANADIG_PLL_SYS_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_SYS_BYPASS_CLK_SRC__OSC_24M 0x0
+#define BV_ANADIG_PLL_SYS_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_SYS_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_SYS_BYPASS_CLK_SRC__XOR 0x3
+#define BM_ANADIG_PLL_SYS_ENABLE 0x00002000
+#define BM_ANADIG_PLL_SYS_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_SYS_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_SYS_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_SYS_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_SYS_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_SYS_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_SYS_DIV_SELECT 0
+#define BM_ANADIG_PLL_SYS_DIV_SELECT 0x0000007F
+#define BF_ANADIG_PLL_SYS_DIV_SELECT(v) \
+ (((v) << 0) & BM_ANADIG_PLL_SYS_DIV_SELECT)
+
+#define BM_ANADIG_USB1_PLL_480_CTRL_LOCK 0x80000000
+#define BP_ANADIG_USB1_PLL_480_CTRL_RSVD1 17
+#define BM_ANADIG_USB1_PLL_480_CTRL_RSVD1 0x7FFE0000
+#define BF_ANADIG_USB1_PLL_480_CTRL_RSVD1(v) \
+ (((v) << 17) & BM_ANADIG_USB1_PLL_480_CTRL_RSVD1)
+#define BM_ANADIG_USB1_PLL_480_CTRL_BYPASS 0x00010000
+#define BP_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC 14
+#define BM_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC(v) \
+ (((v) << 14) & BM_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC)
+#define BV_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC__OSC_24M 0x0
+#define BV_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_USB1_PLL_480_CTRL_BYPASS_CLK_SRC__XOR 0x3
+#define BM_ANADIG_USB1_PLL_480_CTRL_ENABLE 0x00002000
+#define BM_ANADIG_USB1_PLL_480_CTRL_POWER 0x00001000
+#define BM_ANADIG_USB1_PLL_480_CTRL_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_USB1_PLL_480_CTRL_DOUBLE_CP 0x00000400
+#define BM_ANADIG_USB1_PLL_480_CTRL_HALF_CP 0x00000200
+#define BM_ANADIG_USB1_PLL_480_CTRL_DOUBLE_LF 0x00000100
+#define BM_ANADIG_USB1_PLL_480_CTRL_HALF_LF 0x00000080
+#define BM_ANADIG_USB1_PLL_480_CTRL_EN_USB_CLKS 0x00000040
+#define BM_ANADIG_USB1_PLL_480_CTRL_RSVD0 0x00000020
+#define BP_ANADIG_USB1_PLL_480_CTRL_CONTROL0 2
+#define BM_ANADIG_USB1_PLL_480_CTRL_CONTROL0 0x0000001C
+#define BF_ANADIG_USB1_PLL_480_CTRL_CONTROL0(v) \
+ (((v) << 2) & BM_ANADIG_USB1_PLL_480_CTRL_CONTROL0)
+#define BP_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT 0
+#define BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT 0x00000003
+#define BF_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT(v) \
+ (((v) << 0) & BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT)
+
+#define BM_ANADIG_PLL_528_LOCK 0x80000000
+#define BP_ANADIG_PLL_528_RSVD1 19
+#define BM_ANADIG_PLL_528_RSVD1 0x7FF80000
+#define BF_ANADIG_PLL_528_RSVD1(v) \
+ (((v) << 19) & BM_ANADIG_PLL_528_RSVD1)
+#define BM_ANADIG_PLL_528_PFD_OFFSET_EN 0x00040000
+#define BM_ANADIG_PLL_528_DITHER_ENABLE 0x00020000
+#define BM_ANADIG_PLL_528_BYPASS 0x00010000
+#define BP_ANADIG_PLL_528_BYPASS_CLK_SRC 14
+#define BM_ANADIG_PLL_528_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_528_BYPASS_CLK_SRC(v) \
+ (((v) << 14) & BM_ANADIG_PLL_528_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_528_BYPASS_CLK_SRC__OSC_24M 0x0
+#define BV_ANADIG_PLL_528_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_528_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_528_BYPASS_CLK_SRC__XOR 0x3
+#define BM_ANADIG_PLL_528_ENABLE 0x00002000
+#define BM_ANADIG_PLL_528_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_528_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_528_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_528_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_528_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_528_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_528_RSVD0 1
+#define BM_ANADIG_PLL_528_RSVD0 0x0000007E
+#define BF_ANADIG_PLL_528_RSVD0(v) \
+ (((v) << 1) & BM_ANADIG_PLL_528_RSVD0)
+#define BM_ANADIG_PLL_528_DIV_SELECT 0x00000001
+
+#define BP_ANADIG_PLL_528_SS_STOP 16
+#define BM_ANADIG_PLL_528_SS_STOP 0xFFFF0000
+#define BF_ANADIG_PLL_528_SS_STOP(v) \
+ (((v) << 16) & BM_ANADIG_PLL_528_SS_STOP)
+#define BM_ANADIG_PLL_528_SS_ENABLE 0x00008000
+#define BP_ANADIG_PLL_528_SS_STEP 0
+#define BM_ANADIG_PLL_528_SS_STEP 0x00007FFF
+#define BF_ANADIG_PLL_528_SS_STEP(v) \
+ (((v) << 0) & BM_ANADIG_PLL_528_SS_STEP)
+
+#define BP_ANADIG_PLL_528_NUM_RSVD0 30
+#define BM_ANADIG_PLL_528_NUM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_528_NUM_RSVD0(v) \
+ (((v) << 30) & BM_ANADIG_PLL_528_NUM_RSVD0)
+#define BP_ANADIG_PLL_528_NUM_A 0
+#define BM_ANADIG_PLL_528_NUM_A 0x3FFFFFFF
+#define BF_ANADIG_PLL_528_NUM_A(v) \
+ (((v) << 0) & BM_ANADIG_PLL_528_NUM_A)
+
+#define BP_ANADIG_PLL_528_DENOM_RSVD0 30
+#define BM_ANADIG_PLL_528_DENOM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_528_DENOM_RSVD0(v) \
+ (((v) << 30) & BM_ANADIG_PLL_528_DENOM_RSVD0)
+#define BP_ANADIG_PLL_528_DENOM_B 0
+#define BM_ANADIG_PLL_528_DENOM_B 0x3FFFFFFF
+#define BF_ANADIG_PLL_528_DENOM_B(v) \
+ (((v) << 0) & BM_ANADIG_PLL_528_DENOM_B)
+
+#define BM_ANADIG_PLL_AUDIO_LOCK 0x80000000
+#define BP_ANADIG_PLL_AUDIO_RSVD0 22
+#define BM_ANADIG_PLL_AUDIO_RSVD0 0x7FC00000
+#define BF_ANADIG_PLL_AUDIO_RSVD0(v) \
+ (((v) << 22) & BM_ANADIG_PLL_AUDIO_RSVD0)
+#define BM_ANADIG_PLL_AUDIO_SSC_EN 0x00200000
+#define BP_ANADIG_PLL_AUDIO_TEST_DIV_SELECT 19
+#define BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT 0x00180000
+#define BF_ANADIG_PLL_AUDIO_TEST_DIV_SELECT(v) \
+ (((v) << 19) & BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT)
+#define BM_ANADIG_PLL_AUDIO_PFD_OFFSET_EN 0x00040000
+#define BM_ANADIG_PLL_AUDIO_DITHER_ENABLE 0x00020000
+#define BM_ANADIG_PLL_AUDIO_BYPASS 0x00010000
+#define BP_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC 14
+#define BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC(v) \
+ (((v) << 14) & BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC__OSC_24M 0x0
+#define BV_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC__XOR 0x3
+#define BM_ANADIG_PLL_AUDIO_ENABLE 0x00002000
+#define BM_ANADIG_PLL_AUDIO_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_AUDIO_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_AUDIO_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_AUDIO_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_AUDIO_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_AUDIO_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_AUDIO_DIV_SELECT 0
+#define BM_ANADIG_PLL_AUDIO_DIV_SELECT 0x0000007F
+#define BF_ANADIG_PLL_AUDIO_DIV_SELECT(v) \
+ (((v) << 0) & BM_ANADIG_PLL_AUDIO_DIV_SELECT)
+
+#define BP_ANADIG_PLL_AUDIO_NUM_RSVD0 30
+#define BM_ANADIG_PLL_AUDIO_NUM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_AUDIO_NUM_RSVD0(v) \
+ (((v) << 30) & BM_ANADIG_PLL_AUDIO_NUM_RSVD0)
+#define BP_ANADIG_PLL_AUDIO_NUM_A 0
+#define BM_ANADIG_PLL_AUDIO_NUM_A 0x3FFFFFFF
+#define BF_ANADIG_PLL_AUDIO_NUM_A(v) \
+ (((v) << 0) & BM_ANADIG_PLL_AUDIO_NUM_A)
+
+#define BP_ANADIG_PLL_AUDIO_DENOM_RSVD0 30
+#define BM_ANADIG_PLL_AUDIO_DENOM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_AUDIO_DENOM_RSVD0(v) \
+ (((v) << 30) & BM_ANADIG_PLL_AUDIO_DENOM_RSVD0)
+#define BP_ANADIG_PLL_AUDIO_DENOM_B 0
+#define BM_ANADIG_PLL_AUDIO_DENOM_B 0x3FFFFFFF
+#define BF_ANADIG_PLL_AUDIO_DENOM_B(v) \
+ (((v) << 0) & BM_ANADIG_PLL_AUDIO_DENOM_B)
+
+#define BM_ANADIG_PLL_VIDEO_LOCK 0x80000000
+#define BP_ANADIG_PLL_VIDEO_RSVD0 22
+#define BM_ANADIG_PLL_VIDEO_RSVD0 0x7FC00000
+#define BF_ANADIG_PLL_VIDEO_RSVD0(v) \
+ (((v) << 22) & BM_ANADIG_PLL_VIDEO_RSVD0)
+#define BM_ANADIG_PLL_VIDEO_SSC_EN 0x00200000
+#define BP_ANADIG_PLL_VIDEO_TEST_DIV_SELECT 19
+#define BM_ANADIG_PLL_VIDEO_TEST_DIV_SELECT 0x00180000
+#define BF_ANADIG_PLL_VIDEO_TEST_DIV_SELECT(v) \
+ (((v) << 19) & BM_ANADIG_PLL_VIDEO_TEST_DIV_SELECT)
+#define BM_ANADIG_PLL_VIDEO_PFD_OFFSET_EN 0x00040000
+#define BM_ANADIG_PLL_VIDEO_DITHER_ENABLE 0x00020000
+#define BM_ANADIG_PLL_VIDEO_BYPASS 0x00010000
+#define BP_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC 14
+#define BM_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC(v) \
+ (((v) << 14) & BM_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC__OSC_24M 0x0
+#define BV_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_VIDEO_BYPASS_CLK_SRC__XOR 0x3
+#define BM_ANADIG_PLL_VIDEO_ENABLE 0x00002000
+#define BM_ANADIG_PLL_VIDEO_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_VIDEO_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_VIDEO_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_VIDEO_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_VIDEO_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_VIDEO_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_VIDEO_DIV_SELECT 0
+#define BM_ANADIG_PLL_VIDEO_DIV_SELECT 0x0000007F
+#define BF_ANADIG_PLL_VIDEO_DIV_SELECT(v) \
+ (((v) << 0) & BM_ANADIG_PLL_VIDEO_DIV_SELECT)
+
+#define BP_ANADIG_PLL_VIDEO_NUM_RSVD0 30
+#define BM_ANADIG_PLL_VIDEO_NUM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_VIDEO_NUM_RSVD0(v) \
+ (((v) << 30) & BM_ANADIG_PLL_VIDEO_NUM_RSVD0)
+#define BP_ANADIG_PLL_VIDEO_NUM_A 0
+#define BM_ANADIG_PLL_VIDEO_NUM_A 0x3FFFFFFF
+#define BF_ANADIG_PLL_VIDEO_NUM_A(v) \
+ (((v) << 0) & BM_ANADIG_PLL_VIDEO_NUM_A)
+
+#define BP_ANADIG_PLL_VIDEO_DENOM_RSVD0 30
+#define BM_ANADIG_PLL_VIDEO_DENOM_RSVD0 0xC0000000
+#define BF_ANADIG_PLL_VIDEO_DENOM_RSVD0(v) \
+ (((v) << 30) & BM_ANADIG_PLL_VIDEO_DENOM_RSVD0)
+#define BP_ANADIG_PLL_VIDEO_DENOM_B 0
+#define BM_ANADIG_PLL_VIDEO_DENOM_B 0x3FFFFFFF
+#define BF_ANADIG_PLL_VIDEO_DENOM_B(v) \
+ (((v) << 0) & BM_ANADIG_PLL_VIDEO_DENOM_B)
+
+#define BM_ANADIG_PLL_ENET_LOCK 0x80000000
+#define BP_ANADIG_PLL_ENET_RSVD1 21
+#define BM_ANADIG_PLL_ENET_RSVD1 0x7FE00000
+#define BF_ANADIG_PLL_ENET_RSVD1(v) \
+ (((v) << 21) & BM_ANADIG_PLL_ENET_RSVD1)
+#define BM_ANADIG_PLL_ENET_ENABLE_SATA 0x00100000
+#define BM_ANADIG_PLL_ENET_ENABLE_PCIE 0x00080000
+#define BM_ANADIG_PLL_ENET_PFD_OFFSET_EN 0x00040000
+#define BM_ANADIG_PLL_ENET_DITHER_ENABLE 0x00020000
+#define BM_ANADIG_PLL_ENET_BYPASS 0x00010000
+#define BP_ANADIG_PLL_ENET_BYPASS_CLK_SRC 14
+#define BM_ANADIG_PLL_ENET_BYPASS_CLK_SRC 0x0000C000
+#define BF_ANADIG_PLL_ENET_BYPASS_CLK_SRC(v) \
+ (((v) << 14) & BM_ANADIG_PLL_ENET_BYPASS_CLK_SRC)
+#define BV_ANADIG_PLL_ENET_BYPASS_CLK_SRC__OSC_24M 0x0
+#define BV_ANADIG_PLL_ENET_BYPASS_CLK_SRC__ANACLK_1 0x1
+#define BV_ANADIG_PLL_ENET_BYPASS_CLK_SRC__ANACLK_2 0x2
+#define BV_ANADIG_PLL_ENET_BYPASS_CLK_SRC__XOR 0x3
+#define BM_ANADIG_PLL_ENET_ENABLE 0x00002000
+#define BM_ANADIG_PLL_ENET_POWERDOWN 0x00001000
+#define BM_ANADIG_PLL_ENET_HOLD_RING_OFF 0x00000800
+#define BM_ANADIG_PLL_ENET_DOUBLE_CP 0x00000400
+#define BM_ANADIG_PLL_ENET_HALF_CP 0x00000200
+#define BM_ANADIG_PLL_ENET_DOUBLE_LF 0x00000100
+#define BM_ANADIG_PLL_ENET_HALF_LF 0x00000080
+#define BP_ANADIG_PLL_ENET_RSVD0 2
+#define BM_ANADIG_PLL_ENET_RSVD0 0x0000007C
+#define BF_ANADIG_PLL_ENET_RSVD0(v) \
+ (((v) << 2) & BM_ANADIG_PLL_ENET_RSVD0)
+#define BP_ANADIG_PLL_ENET_DIV_SELECT 0
+#define BM_ANADIG_PLL_ENET_DIV_SELECT 0x00000003
+#define BF_ANADIG_PLL_ENET_DIV_SELECT(v) \
+ (((v) << 0) & BM_ANADIG_PLL_ENET_DIV_SELECT)
+
+#define BM_ANADIG_PFD_480_PFD3_CLKGATE 0x80000000
+#define BM_ANADIG_PFD_480_PFD3_STABLE 0x40000000
+#define BP_ANADIG_PFD_480_PFD3_FRAC 24
+#define BM_ANADIG_PFD_480_PFD3_FRAC 0x3F000000
+#define BF_ANADIG_PFD_480_PFD3_FRAC(v) \
+ (((v) << 24) & BM_ANADIG_PFD_480_PFD3_FRAC)
+#define BM_ANADIG_PFD_480_PFD2_CLKGATE 0x00800000
+#define BM_ANADIG_PFD_480_PFD2_STABLE 0x00400000
+#define BP_ANADIG_PFD_480_PFD2_FRAC 16
+#define BM_ANADIG_PFD_480_PFD2_FRAC 0x003F0000
+#define BF_ANADIG_PFD_480_PFD2_FRAC(v) \
+ (((v) << 16) & BM_ANADIG_PFD_480_PFD2_FRAC)
+#define BM_ANADIG_PFD_480_PFD1_CLKGATE 0x00008000
+#define BM_ANADIG_PFD_480_PFD1_STABLE 0x00004000
+#define BP_ANADIG_PFD_480_PFD1_FRAC 8
+#define BM_ANADIG_PFD_480_PFD1_FRAC 0x00003F00
+#define BF_ANADIG_PFD_480_PFD1_FRAC(v) \
+ (((v) << 8) & BM_ANADIG_PFD_480_PFD1_FRAC)
+#define BM_ANADIG_PFD_480_PFD0_CLKGATE 0x00000080
+#define BM_ANADIG_PFD_480_PFD0_STABLE 0x00000040
+#define BP_ANADIG_PFD_480_PFD0_FRAC 0
+#define BM_ANADIG_PFD_480_PFD0_FRAC 0x0000003F
+#define BF_ANADIG_PFD_480_PFD0_FRAC(v) \
+ (((v) << 0) & BM_ANADIG_PFD_480_PFD0_FRAC)
+
+#define BM_ANADIG_PFD_528_PFD3_CLKGATE 0x80000000
+#define BM_ANADIG_PFD_528_PFD3_STABLE 0x40000000
+#define BP_ANADIG_PFD_528_PFD3_FRAC 24
+#define BM_ANADIG_PFD_528_PFD3_FRAC 0x3F000000
+#define BF_ANADIG_PFD_528_PFD3_FRAC(v) \
+ (((v) << 24) & BM_ANADIG_PFD_528_PFD3_FRAC)
+#define BM_ANADIG_PFD_528_PFD2_CLKGATE 0x00800000
+#define BM_ANADIG_PFD_528_PFD2_STABLE 0x00400000
+#define BP_ANADIG_PFD_528_PFD2_FRAC 16
+#define BM_ANADIG_PFD_528_PFD2_FRAC 0x003F0000
+#define BF_ANADIG_PFD_528_PFD2_FRAC(v) \
+ (((v) << 16) & BM_ANADIG_PFD_528_PFD2_FRAC)
+#define BM_ANADIG_PFD_528_PFD1_CLKGATE 0x00008000
+#define BM_ANADIG_PFD_528_PFD1_STABLE 0x00004000
+#define BP_ANADIG_PFD_528_PFD1_FRAC 8
+#define BM_ANADIG_PFD_528_PFD1_FRAC 0x00003F00
+#define BF_ANADIG_PFD_528_PFD1_FRAC(v) \
+ (((v) << 8) & BM_ANADIG_PFD_528_PFD1_FRAC)
+#define BM_ANADIG_PFD_528_PFD0_CLKGATE 0x00000080
+#define BM_ANADIG_PFD_528_PFD0_STABLE 0x00000040
+#define BP_ANADIG_PFD_528_PFD0_FRAC 0
+#define BM_ANADIG_PFD_528_PFD0_FRAC 0x0000003F
+#define BF_ANADIG_PFD_528_PFD0_FRAC(v) \
+ (((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
+
+#define PLL2_PFD0_FREQ 352000000
+#define PLL2_PFD1_FREQ 594000000
+#define PLL2_PFD2_FREQ 400000000
+#define PLL2_PFD2_DIV_FREQ 200000000
+#define PLL3_PFD0_FREQ 720000000
+#define PLL3_PFD1_FREQ 540000000
+#define PLL3_PFD2_FREQ 508200000
+#define PLL3_PFD3_FREQ 454700000
+#define PLL3_80M 80000000
+#define PLL3_60M 60000000
+
+#endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
new file mode 100644
index 0000000..636458f
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_PER_CLK,
+ MXC_AHB_CLK,
+ MXC_IPG_CLK,
+ MXC_IPG_PERCLK,
+ MXC_UART_CLK,
+ MXC_CSPI_CLK,
+ MXC_AXI_CLK,
+ MXC_EMI_SLOW_CLK,
+ MXC_DDR_CLK,
+ MXC_ESDHC_CLK,
+ MXC_ESDHC2_CLK,
+ MXC_ESDHC3_CLK,
+ MXC_ESDHC4_CLK,
+ MXC_SATA_CLK,
+ MXC_NFC_CLK,
+};
+
+u32 imx_get_uartclk(void);
+u32 imx_get_fecclk(void);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-mx6/gpio.h b/arch/arm/include/asm/arch-mx6/gpio.h
new file mode 100644
index 0000000..20c4e57
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/gpio.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __ASM_ARCH_MX6_GPIO_H
+#define __ASM_ARCH_MX6_GPIO_H
+
+/* GPIO registers */
+struct gpio_regs {
+ u32 gpio_dr;
+ u32 gpio_dir;
+ u32 gpio_psr;
+};
+
+#endif /* __ASM_ARCH_MX6_GPIO_H */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
new file mode 100644
index 0000000..c5287e9
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __ASM_ARCH_MX6_IMX_REGS_H__
+#define __ASM_ARCH_MX6_IMX_REGS_H__
+
+#define ROMCP_ARB_BASE_ADDR 0x00000000
+#define ROMCP_ARB_END_ADDR 0x000FFFFF
+#define CAAM_ARB_BASE_ADDR 0x00100000
+#define CAAM_ARB_END_ADDR 0x00103FFF
+#define APBH_DMA_ARB_BASE_ADDR 0x00110000
+#define APBH_DMA_ARB_END_ADDR 0x00117FFF
+#define HDMI_ARB_BASE_ADDR 0x00120000
+#define HDMI_ARB_END_ADDR 0x00128FFF
+#define GPU_3D_ARB_BASE_ADDR 0x00130000
+#define GPU_3D_ARB_END_ADDR 0x00133FFF
+#define GPU_2D_ARB_BASE_ADDR 0x00134000
+#define GPU_2D_ARB_END_ADDR 0x00137FFF
+#define DTCP_ARB_BASE_ADDR 0x00138000
+#define DTCP_ARB_END_ADDR 0x0013BFFF
+
+/* GPV - PL301 configuration ports */
+#define GPV2_BASE_ADDR 0x00200000
+#define GPV3_BASE_ADDR 0x00300000
+#define GPV4_BASE_ADDR 0x00800000
+#define IRAM_BASE_ADDR 0x00900000
+#define SCU_BASE_ADDR 0x00A00000
+#define IC_INTERFACES_BASE_ADDR 0x00A00100
+#define GLOBAL_TIMER_BASE_ADDR 0x00A00200
+#define PRIVATE_TIMERS_WD_BASE_ADDR 0x00A00600
+#define IC_DISTRIBUTOR_BASE_ADDR 0x00A01000
+#define GPV0_BASE_ADDR 0x00B00000
+#define GPV1_BASE_ADDR 0x00C00000
+#define PCIE_ARB_BASE_ADDR 0x01000000
+#define PCIE_ARB_END_ADDR 0x01FFFFFF
+
+#define AIPS1_ARB_BASE_ADDR 0x02000000
+#define AIPS1_ARB_END_ADDR 0x020FFFFF
+#define AIPS2_ARB_BASE_ADDR 0x02100000
+#define AIPS2_ARB_END_ADDR 0x021FFFFF
+#define SATA_ARB_BASE_ADDR 0x02200000
+#define SATA_ARB_END_ADDR 0x02203FFF
+#define OPENVG_ARB_BASE_ADDR 0x02204000
+#define OPENVG_ARB_END_ADDR 0x02207FFF
+#define HSI_ARB_BASE_ADDR 0x02208000
+#define HSI_ARB_END_ADDR 0x0220BFFF
+#define IPU1_ARB_BASE_ADDR 0x02400000
+#define IPU1_ARB_END_ADDR 0x027FFFFF
+#define IPU2_ARB_BASE_ADDR 0x02800000
+#define IPU2_ARB_END_ADDR 0x02BFFFFF
+#define WEIM_ARB_BASE_ADDR 0x08000000
+#define WEIM_ARB_END_ADDR 0x0FFFFFFF
+
+#define MMDC0_ARB_BASE_ADDR 0x10000000
+#define MMDC0_ARB_END_ADDR 0x7FFFFFFF
+#define MMDC1_ARB_BASE_ADDR 0x80000000
+#define MMDC1_ARB_END_ADDR 0xFFFFFFFF
+
+/* Defines for Blocks connected via AIPS (SkyBlue) */
+#define ATZ1_BASE_ADDR AIPS1_ARB_BASE_ADDR
+#define ATZ2_BASE_ADDR AIPS2_ARB_BASE_ADDR
+
+#define SPDIF_BASE_ADDR (ATZ1_BASE_ADDR + 0x04000)
+#define ECSPI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x08000)
+#define ECSPI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x0C000)
+#define ECSPI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x10000)
+#define ECSPI4_BASE_ADDR (ATZ1_BASE_ADDR + 0x14000)
+#define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define UART1_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000)
+#define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define SSI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000)
+#define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
+#define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
+#define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000)
+#define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000)
+#define AIPS1_ON_BASE_ADDR (ATZ1_BASE_ADDR + 0x7C000)
+
+#define AIPS1_OFF_BASE_ADDR (ATZ1_BASE_ADDR + 0x80000)
+#define PWM1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x0000)
+#define PWM2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x4000)
+#define PWM3_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x8000)
+#define PWM4_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0xC000)
+#define CAN1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x10000)
+#define CAN2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x14000)
+#define GPT1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x18000)
+#define GPIO1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x1C000)
+#define GPIO2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x20000)
+#define GPIO3_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x24000)
+#define GPIO4_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x28000)
+#define GPIO5_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x2C000)
+#define GPIO6_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x30000)
+#define GPIO7_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000)
+#define KPP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x38000)
+#define WDOG1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x3C000)
+#define WDOG2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x40000)
+#define CCM_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x44000)
+#define ANATOP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x48000)
+#define SNVS_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x4C000)
+#define EPIT1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x50000)
+#define EPIT2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x54000)
+#define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x58000)
+#define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000)
+#define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000)
+#define DCIC1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
+#define DCIC2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
+
+#define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000)
+#define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000)
+#define CAAM_BASE_ADDR (ATZ2_BASE_ADDR)
+#define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000)
+#define USBOH3_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
+#define USBOH3_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
+#define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000)
+#define MLB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000)
+#define USDHC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x10000)
+#define USDHC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x14000)
+#define USDHC3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x18000)
+#define USDHC4_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x1C000)
+#define I2C1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x20000)
+#define I2C2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x24000)
+#define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000)
+#define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000)
+#define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000)
+#define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+#define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000)
+#define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000)
+#define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000)
+#define IP2APB_PERFMON1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000)
+#define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000)
+#define IP2APB_PERFMON3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000)
+#define IP2APB_TZASC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x50000)
+#define IP2APB_TZASC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000)
+#define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000)
+#define MIPI_CSI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000)
+#define MIPI_DSI_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000)
+#define VDOA_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000)
+#define UART2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x68000)
+#define UART3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x6C000)
+#define UART4_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x70000)
+#define UART5_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x74000)
+#define IP2APB_USBPHY1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000)
+#define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
+
+#define CHIP_REV_1_0 0x10
+#define IRAM_SIZE 0x00040000
+#define IMX_IIM_BASE OCOTP_BASE_ADDR
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+extern void imx_get_mac_from_fuse(unsigned char *mac);
+
+/* System Reset Controller (SRC) */
+struct src {
+ u32 scr;
+ u32 sbmr1;
+ u32 srsr;
+ u32 reserved1[2];
+ u32 sisr;
+ u32 simr;
+ u32 sbmr2;
+ u32 gpr1;
+ u32 gpr2;
+ u32 gpr3;
+ u32 gpr4;
+ u32 gpr5;
+ u32 gpr6;
+ u32 gpr7;
+ u32 gpr8;
+ u32 gpr9;
+ u32 gpr10;
+};
+
+struct iim_regs {
+ u32 ctrl;
+ u32 ctrl_set;
+ u32 ctrl_clr;
+ u32 ctrl_tog;
+ u32 timing;
+ u32 rsvd0[3];
+ u32 data;
+ u32 rsvd1[3];
+ u32 read_ctrl;
+ u32 rsvd2[3];
+ u32 fuse_data;
+ u32 rsvd3[3];
+ u32 sticky;
+ u32 rsvd4[3];
+ u32 scs;
+ u32 scs_set;
+ u32 scs_clr;
+ u32 scs_tog;
+ u32 crc_addr;
+ u32 rsvd5[3];
+ u32 crc_value;
+ u32 rsvd6[3];
+ u32 version;
+ u32 rsvd7[0xd8];
+
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ } bank[15];
+};
+
+struct fuse_bank4_regs {
+ u32 sjc_resp_low;
+ u32 rsvd0[3];
+ u32 sjc_resp_high;
+ u32 rsvd1[3];
+ u32 mac_addr_low;
+ u32 rsvd2[3];
+ u32 mac_addr_high;
+ u32 rsvd3[0x13];
+};
+
+#endif /* __ASSEMBLER__*/
+#endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/iomux-v3.h b/arch/arm/include/asm/arch-mx6/iomux-v3.h
new file mode 100644
index 0000000..4558f4f
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/iomux-v3.h
@@ -0,0 +1,103 @@
+/*
+ * Based on Linux i.MX iomux-v3.h file:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ * build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ * things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ * (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ * (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ *
+ * IOMUX/PAD Bit field definitions
+ *
+ * MUX_CTRL_OFS: 0..11 (12)
+ * PAD_CTRL_OFS: 12..23 (12)
+ * SEL_INPUT_OFS: 24..35 (12)
+ * MUX_MODE + SION: 36..40 (5)
+ * PAD_CTRL + NO_PAD_CTRL: 41..58 (18)
+ * SEL_INP: 59..62 (4)
+ * reserved: 63 (1)
+*/
+
+typedef u64 iomux_v3_cfg_t;
+
+#define MUX_CTRL_OFS_SHIFT 0
+#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
+#define MUX_PAD_CTRL_OFS_SHIFT 12
+#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << \
+ MUX_PAD_CTRL_OFS_SHIFT)
+#define MUX_SEL_INPUT_OFS_SHIFT 24
+#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << \
+ MUX_SEL_INPUT_OFS_SHIFT)
+
+#define MUX_MODE_SHIFT 36
+#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
+#define MUX_PAD_CTRL_SHIFT 41
+#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x3ffff << MUX_PAD_CTRL_SHIFT)
+#define MUX_SEL_INPUT_SHIFT 59
+#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
+
+#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+
+#define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs, \
+ sel_input, pad_ctrl) \
+ (((iomux_v3_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
+ ((iomux_v3_cfg_t)(mux_mode) << MUX_MODE_SHIFT) | \
+ ((iomux_v3_cfg_t)(pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
+ ((iomux_v3_cfg_t)(pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
+ ((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \
+ ((iomux_v3_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT))
+
+#define NO_PAD_CTRL (1 << 17)
+#define GPIO_PIN_MASK 0x1f
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define MUX_CONFIG_SION (0x1 << 4)
+
+int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
+int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
new file mode 100644
index 0000000..b3f613c
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
@@ -0,0 +1,1683 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Auto Generate file, please don't edit it
+ *
+ */
+
+#ifndef __ASM_ARCH_MX6_MX6X_PINS_H__
+#define __ASM_ARCH_MX6_MX6X_PINS_H__
+
+#include <asm/arch/iomux-v3.h>
+
+/* Use to set PAD control */
+#define PAD_CTL_HYS (1 << 16)
+#define PAD_CTL_PUS_100K_DOWN (0 << 14)
+#define PAD_CTL_PUS_47K_UP (1 << 14)
+#define PAD_CTL_PUS_100K_UP (2 << 14)
+#define PAD_CTL_PUS_22K_UP (3 << 14)
+
+#define PAD_CTL_PUE (1 << 13)
+#define PAD_CTL_PKE (1 << 12)
+#define PAD_CTL_ODE (1 << 11)
+#define PAD_CTL_SPEED_LOW (1 << 6)
+#define PAD_CTL_SPEED_MED (2 << 6)
+#define PAD_CTL_SPEED_HIGH (3 << 6)
+#define PAD_CTL_DSE_DISABLE (0 << 3)
+#define PAD_CTL_DSE_240ohm (1 << 3)
+#define PAD_CTL_DSE_120ohm (2 << 3)
+#define PAD_CTL_DSE_80ohm (3 << 3)
+#define PAD_CTL_DSE_60ohm (4 << 3)
+#define PAD_CTL_DSE_48ohm (5 << 3)
+#define PAD_CTL_DSE_40ohm (6 << 3)
+#define PAD_CTL_DSE_34ohm (7 << 3)
+#define PAD_CTL_SRE_FAST (1 << 0)
+#define PAD_CTL_SRE_SLOW (0 << 0)
+
+#define NO_MUX_I 0x3FF
+#define NO_PAD_I 0x7FF
+
+enum {
+ MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),
+ MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2 = IOMUX_PAD(0x0360, 0x004C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x0360, 0x004C, 3, 0x07C8, 0, 0),
+ MX6Q_PAD_SD2_DAT1__KPP_COL_7 = IOMUX_PAD(0x0360, 0x004C, 4, 0x08F0, 0, 0),
+ MX6Q_PAD_SD2_DAT1__GPIO_1_14 = IOMUX_PAD(0x0360, 0x004C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT1__CCM_WAIT = IOMUX_PAD(0x0360, 0x004C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0 = IOMUX_PAD(0x0360, 0x004C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x0364, 0x0050, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0364, 0x0050, 1, 0x0838, 0, 0),
+ MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3 = IOMUX_PAD(0x0364, 0x0050, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x07B8, 0, 0),
+ MX6Q_PAD_SD2_DAT2__KPP_ROW_6 = IOMUX_PAD(0x0364, 0x0050, 4, 0x08F8, 0, 0),
+ MX6Q_PAD_SD2_DAT2__GPIO_1_13 = IOMUX_PAD(0x0364, 0x0050, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT2__CCM_STOP = IOMUX_PAD(0x0364, 0x0050, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1 = IOMUX_PAD(0x0364, 0x0050, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0368, 0x0054, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0368, 0x0054, 1, 0x082C, 0, 0),
+ MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x07B4, 0, 0),
+ MX6Q_PAD_SD2_DAT0__KPP_ROW_7 = IOMUX_PAD(0x0368, 0x0054, 4, 0x08FC, 0, 0),
+ MX6Q_PAD_SD2_DAT0__GPIO_1_15 = IOMUX_PAD(0x0368, 0x0054, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT = IOMUX_PAD(0x0368, 0x0054, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT0__TESTO_2 = IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA = IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x036C, 0x0058, 2, 0x0918, 0, 0),
+ MX6Q_PAD_RGMII_TXC__GPIO_6_19 = IOMUX_PAD(0x036C, 0x0058, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 = IOMUX_PAD(0x036C, 0x0058, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT = IOMUX_PAD(0x036C, 0x0058, 7, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY = IOMUX_PAD(0x0370, 0x005C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x0370, 0x005C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD0__GPIO_6_20 = IOMUX_PAD(0x0370, 0x005C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 = IOMUX_PAD(0x0370, 0x005C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG = IOMUX_PAD(0x0374, 0x0060, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x0374, 0x0060, 1, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD1__GPIO_6_21 = IOMUX_PAD(0x0374, 0x0060, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 = IOMUX_PAD(0x0374, 0x0060, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP = IOMUX_PAD(0x0374, 0x0060, 7, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA = IOMUX_PAD(0x0378, 0x0064, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x0378, 0x0064, 1, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD2__GPIO_6_22 = IOMUX_PAD(0x0378, 0x0064, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 = IOMUX_PAD(0x0378, 0x0064, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP = IOMUX_PAD(0x0378, 0x0064, 7, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK = IOMUX_PAD(0x037C, 0x0068, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x037C, 0x0068, 1, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD3__GPIO_6_23 = IOMUX_PAD(0x037C, 0x0068, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 = IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA = IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x0380, 0x006C, 1, 0x0858, 0, 0),
+ MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x0380, 0x006C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 = IOMUX_PAD(0x0380, 0x006C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY = IOMUX_PAD(0x0384, 0x0070, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0384, 0x0070, 1, 0x0848, 0, 0),
+ MX6Q_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0384, 0x0070, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 = IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE = IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 = IOMUX_PAD(0x0388, 0x0074, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 = IOMUX_PAD(0x0388, 0x0074, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT = IOMUX_PAD(0x0388, 0x0074, 7, 0x083C, 0, 0),
+ MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL = IOMUX_PAD(0x038C, 0x0078, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x038C, 0x0078, 1, 0x084C, 0, 0),
+ MX6Q_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x038C, 0x0078, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 = IOMUX_PAD(0x038C, 0x0078, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD1__SJC_FAIL = IOMUX_PAD(0x038C, 0x0078, 7, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA = IOMUX_PAD(0x0390, 0x007C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x0390, 0x007C, 1, 0x0850, 0, 0),
+ MX6Q_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x0390, 0x007C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 = IOMUX_PAD(0x0390, 0x007C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK = IOMUX_PAD(0x0394, 0x0080, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x0394, 0x0080, 1, 0x0854, 0, 0),
+ MX6Q_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x0394, 0x0080, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 = IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE = IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x0398, 0x0084, 1, 0x0844, 0, 0),
+ MX6Q_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x0398, 0x0084, 5, 0x0000, 0, 0),
+ MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 = IOMUX_PAD(0x0398, 0x0084, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25 = IOMUX_PAD(0x039C, 0x0088, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A25__ECSPI4_SS1 = IOMUX_PAD(0x039C, 0x0088, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x039C, 0x0088, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 = IOMUX_PAD(0x039C, 0x0088, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS = IOMUX_PAD(0x039C, 0x0088, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A25__GPIO_5_2 = IOMUX_PAD(0x039C, 0x0088, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE = IOMUX_PAD(0x039C, 0x0088, 6, 0x088C, 0, 0),
+ MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0 = IOMUX_PAD(0x039C, 0x0088, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2 = IOMUX_PAD(0x03A0, 0x008C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x03A0, 0x008C, 1, 0x0800, 0, 0),
+ MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x03A0, 0x008C, 2, 0x07EC, 0, 0),
+ MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19 = IOMUX_PAD(0x03A0, 0x008C, 3, 0x08D4, 0, 0),
+ MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL = IOMUX_PAD(0x03A0, 0x008C, 4, 0x0890, 0, 0),
+ MX6Q_PAD_EIM_EB2__GPIO_2_30 = IOMUX_PAD(0x03A0, 0x008C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x03A0, 0x008C, 22, 0x08A0, 0, 0),
+ MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30 = IOMUX_PAD(0x03A0, 0x008C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16 = IOMUX_PAD(0x03A4, 0x0090, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x03A4, 0x0090, 1, 0x07F4, 0, 0),
+ MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5 = IOMUX_PAD(0x03A4, 0x0090, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18 = IOMUX_PAD(0x03A4, 0x0090, 3, 0x08D0, 0, 0),
+ MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA = IOMUX_PAD(0x03A4, 0x0090, 4, 0x0894, 0, 0),
+ MX6Q_PAD_EIM_D16__GPIO_3_16 = IOMUX_PAD(0x03A4, 0x0090, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x03A4, 0x0090, 22, 0x08A4, 0, 0),
+ MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17 = IOMUX_PAD(0x03A8, 0x0094, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x03A8, 0x0094, 1, 0x07F8, 0, 0),
+ MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6 = IOMUX_PAD(0x03A8, 0x0094, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x03A8, 0x0094, 3, 0x08E0, 0, 0),
+ MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT = IOMUX_PAD(0x03A8, 0x0094, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D17__GPIO_3_17 = IOMUX_PAD(0x03A8, 0x0094, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x03A8, 0x0094, 22, 0x08A8, 0, 0),
+ MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1 = IOMUX_PAD(0x03A8, 0x0094, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18 = IOMUX_PAD(0x03AC, 0x0098, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x03AC, 0x0098, 1, 0x07FC, 0, 0),
+ MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7 = IOMUX_PAD(0x03AC, 0x0098, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17 = IOMUX_PAD(0x03AC, 0x0098, 3, 0x08CC, 0, 0),
+ MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS = IOMUX_PAD(0x03AC, 0x0098, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D18__GPIO_3_18 = IOMUX_PAD(0x03AC, 0x0098, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x03AC, 0x0098, 22, 0x08AC, 0, 0),
+ MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2 = IOMUX_PAD(0x03AC, 0x0098, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19 = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x03B0, 0x009C, 1, 0x0804, 0, 0),
+ MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8 = IOMUX_PAD(0x03B0, 0x009C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16 = IOMUX_PAD(0x03B0, 0x009C, 3, 0x08C8, 0, 0),
+ MX6Q_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x03B0, 0x009C, 4, 0x091C, 0, 0),
+ MX6Q_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x03B0, 0x009C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D19__PL301MX6QPER1_HRESP = IOMUX_PAD(0x03B0, 0x009C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D20__ECSPI4_SS0 = IOMUX_PAD(0x03B4, 0x00A0, 1, 0x0824, 0, 0),
+ MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 = IOMUX_PAD(0x03B4, 0x00A0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03B4, 0x00A0, 3, 0x08C4, 0, 0),
+ MX6Q_PAD_EIM_D20__UART1_CTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x091C, 1, 0),
+ MX6Q_PAD_EIM_D20__GPIO_3_20 = IOMUX_PAD(0x03B4, 0x00A0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x03B4, 0x00A0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D21__ECSPI4_SCLK = IOMUX_PAD(0x03B8, 0x00A4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 = IOMUX_PAD(0x03B8, 0x00A4, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11 = IOMUX_PAD(0x03B8, 0x00A4, 3, 0x08B4, 0, 0),
+ MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x03B8, 0x00A4, 4, 0x0944, 0, 0),
+ MX6Q_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x03B8, 0x00A4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x03B8, 0x00A4, 22, 0x0898, 0, 0),
+ MX6Q_PAD_EIM_D21__SPDIF_IN1 = IOMUX_PAD(0x03B8, 0x00A4, 7, 0x0914, 0, 0),
+ MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D22__ECSPI4_MISO = IOMUX_PAD(0x03BC, 0x00A8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1 = IOMUX_PAD(0x03BC, 0x00A8, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10 = IOMUX_PAD(0x03BC, 0x00A8, 3, 0x08B0, 0, 0),
+ MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x03BC, 0x00A8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D22__GPIO_3_22 = IOMUX_PAD(0x03BC, 0x00A8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D22__SPDIF_OUT1 = IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D22__PL301MX6QPER1_HWRITE = IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23 = IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS = IOMUX_PAD(0x03C0, 0x00AC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x03C0, 0x00AC, 2, 0x092C, 0, 0),
+ MX6Q_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x03C0, 0x00AC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x03C0, 0x00AC, 4, 0x08D8, 0, 0),
+ MX6Q_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2 = IOMUX_PAD(0x03C0, 0x00AC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 = IOMUX_PAD(0x03C0, 0x00AC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB3__ECSPI4_RDY = IOMUX_PAD(0x03C4, 0x00B0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB3__UART3_CTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x092C, 1, 0),
+ MX6Q_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x03C4, 0x00B0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC = IOMUX_PAD(0x03C4, 0x00B0, 4, 0x08DC, 0, 0),
+ MX6Q_PAD_EIM_EB3__GPIO_2_31 = IOMUX_PAD(0x03C4, 0x00B0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3 = IOMUX_PAD(0x03C4, 0x00B0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31 = IOMUX_PAD(0x03C4, 0x00B0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D24__UART3_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0),
+ MX6Q_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0808, 0, 0),
+ MX6Q_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x07D8, 0, 0),
+ MX6Q_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D25__UART3_TXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0930, 1, 0),
+ MX6Q_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x080C, 0, 0),
+ MX6Q_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D25__GPIO_3_25 = IOMUX_PAD(0x03CC, 0x00B8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03CC, 0x00B8, 6, 0x07D4, 0, 0),
+ MX6Q_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x03CC, 0x00B8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 = IOMUX_PAD(0x03D0, 0x00BC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x03D0, 0x00BC, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x08C0, 0, 0),
+ MX6Q_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D26__UART2_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0),
+ MX6Q_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x03D4, 0x00C0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13 = IOMUX_PAD(0x03D4, 0x00C0, 3, 0x08BC, 0, 0),
+ MX6Q_PAD_EIM_D27__UART2_TXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0928, 1, 0),
+ MX6Q_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23 = IOMUX_PAD(0x03D4, 0x00C0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x03D8, 0x00C4, 17, 0x089C, 0, 0),
+ MX6Q_PAD_EIM_D28__ECSPI4_MOSI = IOMUX_PAD(0x03D8, 0x00C4, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12 = IOMUX_PAD(0x03D8, 0x00C4, 3, 0x08B8, 0, 0),
+ MX6Q_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x03D8, 0x00C4, 4, 0x0924, 0, 0),
+ MX6Q_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x03D8, 0x00C4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG = IOMUX_PAD(0x03D8, 0x00C4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 = IOMUX_PAD(0x03D8, 0x00C4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 = IOMUX_PAD(0x03DC, 0x00C8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D29__ECSPI4_SS0 = IOMUX_PAD(0x03DC, 0x00C8, 2, 0x0824, 1, 0),
+ MX6Q_PAD_EIM_D29__UART2_CTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0924, 1, 0),
+ MX6Q_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x03DC, 0x00C8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC = IOMUX_PAD(0x03DC, 0x00C8, 6, 0x08E4, 0, 0),
+ MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 = IOMUX_PAD(0x03DC, 0x00C8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21 = IOMUX_PAD(0x03E0, 0x00CC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 = IOMUX_PAD(0x03E0, 0x00CC, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3 = IOMUX_PAD(0x03E0, 0x00CC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x03E0, 0x00CC, 4, 0x092C, 2, 0),
+ MX6Q_PAD_EIM_D30__GPIO_3_30 = IOMUX_PAD(0x03E0, 0x00CC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x03E0, 0x00CC, 6, 0x0948, 0, 0),
+ MX6Q_PAD_EIM_D30__PL301MX6QPER1_HPROT_0 = IOMUX_PAD(0x03E0, 0x00CC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20 = IOMUX_PAD(0x03E4, 0x00D0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 = IOMUX_PAD(0x03E4, 0x00D0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2 = IOMUX_PAD(0x03E4, 0x00D0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D31__UART3_CTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x092C, 3, 0),
+ MX6Q_PAD_EIM_D31__GPIO_3_31 = IOMUX_PAD(0x03E4, 0x00D0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x03E4, 0x00D0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_D31__PL301MX6QPER1_HPROT_1 = IOMUX_PAD(0x03E4, 0x00D0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19 = IOMUX_PAD(0x03E8, 0x00D4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19 = IOMUX_PAD(0x03E8, 0x00D4, 2, 0x08D4, 1, 0),
+ MX6Q_PAD_EIM_A24__IPU2_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A24__IPU1_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A24__GPIO_5_4 = IOMUX_PAD(0x03E8, 0x00D4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A24__PL301MX6QPER1_HPROT_2 = IOMUX_PAD(0x03E8, 0x00D4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A24__SRC_BT_CFG_24 = IOMUX_PAD(0x03E8, 0x00D4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18 = IOMUX_PAD(0x03EC, 0x00D8, 2, 0x08D0, 1, 0),
+ MX6Q_PAD_EIM_A23__IPU2_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A23__IPU1_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A23__GPIO_6_6 = IOMUX_PAD(0x03EC, 0x00D8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A23__PL301MX6QPER1_HPROT_3 = IOMUX_PAD(0x03EC, 0x00D8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A23__SRC_BT_CFG_23 = IOMUX_PAD(0x03EC, 0x00D8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17 = IOMUX_PAD(0x03F0, 0x00DC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17 = IOMUX_PAD(0x03F0, 0x00DC, 2, 0x08CC, 1, 0),
+ MX6Q_PAD_EIM_A22__GPIO_2_16 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A22__TPSMP_HDATA_0 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A22__SRC_BT_CFG_22 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16 = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x08C8, 1, 0),
+ MX6Q_PAD_EIM_A21__RESERVED_RESERVED = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 = IOMUX_PAD(0x03F4, 0x00E0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A21__GPIO_2_17 = IOMUX_PAD(0x03F4, 0x00E0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A21__TPSMP_HDATA_1 = IOMUX_PAD(0x03F4, 0x00E0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A21__SRC_BT_CFG_21 = IOMUX_PAD(0x03F4, 0x00E0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15 = IOMUX_PAD(0x03F8, 0x00E4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03F8, 0x00E4, 2, 0x08C4, 1, 0),
+ MX6Q_PAD_EIM_A20__RESERVED_RESERVED = IOMUX_PAD(0x03F8, 0x00E4, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 = IOMUX_PAD(0x03F8, 0x00E4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A20__GPIO_2_18 = IOMUX_PAD(0x03F8, 0x00E4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A20__TPSMP_HDATA_2 = IOMUX_PAD(0x03F8, 0x00E4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A20__SRC_BT_CFG_20 = IOMUX_PAD(0x03F8, 0x00E4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14 = IOMUX_PAD(0x03FC, 0x00E8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14 = IOMUX_PAD(0x03FC, 0x00E8, 2, 0x08C0, 1, 0),
+ MX6Q_PAD_EIM_A19__RESERVED_RESERVED = IOMUX_PAD(0x03FC, 0x00E8, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 = IOMUX_PAD(0x03FC, 0x00E8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A19__GPIO_2_19 = IOMUX_PAD(0x03FC, 0x00E8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A19__TPSMP_HDATA_3 = IOMUX_PAD(0x03FC, 0x00E8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A19__SRC_BT_CFG_19 = IOMUX_PAD(0x03FC, 0x00E8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13 = IOMUX_PAD(0x0400, 0x00EC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13 = IOMUX_PAD(0x0400, 0x00EC, 2, 0x08BC, 1, 0),
+ MX6Q_PAD_EIM_A18__RESERVED_RESERVED = IOMUX_PAD(0x0400, 0x00EC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 = IOMUX_PAD(0x0400, 0x00EC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A18__GPIO_2_20 = IOMUX_PAD(0x0400, 0x00EC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A18__TPSMP_HDATA_4 = IOMUX_PAD(0x0400, 0x00EC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A18__SRC_BT_CFG_18 = IOMUX_PAD(0x0400, 0x00EC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12 = IOMUX_PAD(0x0404, 0x00F0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12 = IOMUX_PAD(0x0404, 0x00F0, 2, 0x08B8, 1, 0),
+ MX6Q_PAD_EIM_A17__RESERVED_RESERVED = IOMUX_PAD(0x0404, 0x00F0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 = IOMUX_PAD(0x0404, 0x00F0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A17__GPIO_2_21 = IOMUX_PAD(0x0404, 0x00F0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A17__TPSMP_HDATA_5 = IOMUX_PAD(0x0404, 0x00F0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A17__SRC_BT_CFG_17 = IOMUX_PAD(0x0404, 0x00F0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK = IOMUX_PAD(0x0408, 0x00F4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x0408, 0x00F4, 2, 0x08E0, 1, 0),
+ MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 = IOMUX_PAD(0x0408, 0x00F4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A16__GPIO_2_22 = IOMUX_PAD(0x0408, 0x00F4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A16__TPSMP_HDATA_6 = IOMUX_PAD(0x0408, 0x00F4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_A16__SRC_BT_CFG_16 = IOMUX_PAD(0x0408, 0x00F4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5 = IOMUX_PAD(0x040C, 0x00F8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x040C, 0x00F8, 2, 0x0810, 0, 0),
+ MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 = IOMUX_PAD(0x040C, 0x00F8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS0__GPIO_2_23 = IOMUX_PAD(0x040C, 0x00F8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7 = IOMUX_PAD(0x040C, 0x00F8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6 = IOMUX_PAD(0x0410, 0x00FC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x0410, 0x00FC, 2, 0x0818, 0, 0),
+ MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 = IOMUX_PAD(0x0410, 0x00FC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS1__GPIO_2_24 = IOMUX_PAD(0x0410, 0x00FC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8 = IOMUX_PAD(0x0410, 0x00FC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_OE__WEIM_WEIM_OE = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7 = IOMUX_PAD(0x0414, 0x0100, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x0414, 0x0100, 2, 0x0814, 0, 0),
+ MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 = IOMUX_PAD(0x0414, 0x0100, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_OE__GPIO_2_25 = IOMUX_PAD(0x0414, 0x0100, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_OE__TPSMP_HDATA_9 = IOMUX_PAD(0x0414, 0x0100, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_RW__WEIM_WEIM_RW = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8 = IOMUX_PAD(0x0418, 0x0104, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x0418, 0x0104, 2, 0x081C, 0, 0),
+ MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 = IOMUX_PAD(0x0418, 0x0104, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_RW__GPIO_2_26 = IOMUX_PAD(0x0418, 0x0104, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_RW__TPSMP_HDATA_10 = IOMUX_PAD(0x0418, 0x0104, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_RW__SRC_BT_CFG_29 = IOMUX_PAD(0x0418, 0x0104, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 = IOMUX_PAD(0x041C, 0x0108, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x041C, 0x0108, 2, 0x0820, 0, 0),
+ MX6Q_PAD_EIM_LBA__GPIO_2_27 = IOMUX_PAD(0x041C, 0x0108, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11 = IOMUX_PAD(0x041C, 0x0108, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26 = IOMUX_PAD(0x041C, 0x0108, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11 = IOMUX_PAD(0x0420, 0x010C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11 = IOMUX_PAD(0x0420, 0x010C, 2, 0x08B4, 1, 0),
+ MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 = IOMUX_PAD(0x0420, 0x010C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY = IOMUX_PAD(0x0420, 0x010C, 4, 0x07F0, 0, 0),
+ MX6Q_PAD_EIM_EB0__GPIO_2_28 = IOMUX_PAD(0x0420, 0x010C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12 = IOMUX_PAD(0x0420, 0x010C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27 = IOMUX_PAD(0x0420, 0x010C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1 = IOMUX_PAD(0x0424, 0x0110, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10 = IOMUX_PAD(0x0424, 0x0110, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10 = IOMUX_PAD(0x0424, 0x0110, 2, 0x08B0, 1, 0),
+ MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 = IOMUX_PAD(0x0424, 0x0110, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB1__GPIO_2_29 = IOMUX_PAD(0x0424, 0x0110, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13 = IOMUX_PAD(0x0424, 0x0110, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28 = IOMUX_PAD(0x0424, 0x0110, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 = IOMUX_PAD(0x0428, 0x0114, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9 = IOMUX_PAD(0x0428, 0x0114, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9 = IOMUX_PAD(0x0428, 0x0114, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 = IOMUX_PAD(0x0428, 0x0114, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA0__GPIO_3_0 = IOMUX_PAD(0x0428, 0x0114, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14 = IOMUX_PAD(0x0428, 0x0114, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0 = IOMUX_PAD(0x0428, 0x0114, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 = IOMUX_PAD(0x042C, 0x0118, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8 = IOMUX_PAD(0x042C, 0x0118, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8 = IOMUX_PAD(0x042C, 0x0118, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 = IOMUX_PAD(0x042C, 0x0118, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE = IOMUX_PAD(0x042C, 0x0118, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA1__GPIO_3_1 = IOMUX_PAD(0x042C, 0x0118, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15 = IOMUX_PAD(0x042C, 0x0118, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1 = IOMUX_PAD(0x042C, 0x0118, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 = IOMUX_PAD(0x0430, 0x011C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7 = IOMUX_PAD(0x0430, 0x011C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7 = IOMUX_PAD(0x0430, 0x011C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 = IOMUX_PAD(0x0430, 0x011C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE = IOMUX_PAD(0x0430, 0x011C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA2__GPIO_3_2 = IOMUX_PAD(0x0430, 0x011C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16 = IOMUX_PAD(0x0430, 0x011C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2 = IOMUX_PAD(0x0430, 0x011C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 = IOMUX_PAD(0x0434, 0x0120, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6 = IOMUX_PAD(0x0434, 0x0120, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6 = IOMUX_PAD(0x0434, 0x0120, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 = IOMUX_PAD(0x0434, 0x0120, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ = IOMUX_PAD(0x0434, 0x0120, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA3__GPIO_3_3 = IOMUX_PAD(0x0434, 0x0120, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17 = IOMUX_PAD(0x0434, 0x0120, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3 = IOMUX_PAD(0x0434, 0x0120, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 = IOMUX_PAD(0x0438, 0x0124, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5 = IOMUX_PAD(0x0438, 0x0124, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5 = IOMUX_PAD(0x0438, 0x0124, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 = IOMUX_PAD(0x0438, 0x0124, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN = IOMUX_PAD(0x0438, 0x0124, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA4__GPIO_3_4 = IOMUX_PAD(0x0438, 0x0124, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18 = IOMUX_PAD(0x0438, 0x0124, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4 = IOMUX_PAD(0x0438, 0x0124, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 = IOMUX_PAD(0x043C, 0x0128, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4 = IOMUX_PAD(0x043C, 0x0128, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4 = IOMUX_PAD(0x043C, 0x0128, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 = IOMUX_PAD(0x043C, 0x0128, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP = IOMUX_PAD(0x043C, 0x0128, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA5__GPIO_3_5 = IOMUX_PAD(0x043C, 0x0128, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19 = IOMUX_PAD(0x043C, 0x0128, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5 = IOMUX_PAD(0x043C, 0x0128, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 = IOMUX_PAD(0x0440, 0x012C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3 = IOMUX_PAD(0x0440, 0x012C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3 = IOMUX_PAD(0x0440, 0x012C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 = IOMUX_PAD(0x0440, 0x012C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN = IOMUX_PAD(0x0440, 0x012C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA6__GPIO_3_6 = IOMUX_PAD(0x0440, 0x012C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20 = IOMUX_PAD(0x0440, 0x012C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6 = IOMUX_PAD(0x0440, 0x012C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 = IOMUX_PAD(0x0444, 0x0130, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2 = IOMUX_PAD(0x0444, 0x0130, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2 = IOMUX_PAD(0x0444, 0x0130, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 = IOMUX_PAD(0x0444, 0x0130, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA7__GPIO_3_7 = IOMUX_PAD(0x0444, 0x0130, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21 = IOMUX_PAD(0x0444, 0x0130, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7 = IOMUX_PAD(0x0444, 0x0130, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 = IOMUX_PAD(0x0448, 0x0134, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1 = IOMUX_PAD(0x0448, 0x0134, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1 = IOMUX_PAD(0x0448, 0x0134, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 = IOMUX_PAD(0x0448, 0x0134, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA8__GPIO_3_8 = IOMUX_PAD(0x0448, 0x0134, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22 = IOMUX_PAD(0x0448, 0x0134, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8 = IOMUX_PAD(0x0448, 0x0134, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 = IOMUX_PAD(0x044C, 0x0138, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0 = IOMUX_PAD(0x044C, 0x0138, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0 = IOMUX_PAD(0x044C, 0x0138, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 = IOMUX_PAD(0x044C, 0x0138, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x044C, 0x0138, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23 = IOMUX_PAD(0x044C, 0x0138, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9 = IOMUX_PAD(0x044C, 0x0138, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 = IOMUX_PAD(0x0450, 0x013C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 = IOMUX_PAD(0x0450, 0x013C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x0450, 0x013C, 2, 0x08D8, 1, 0),
+ MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 = IOMUX_PAD(0x0450, 0x013C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA10__GPIO_3_10 = IOMUX_PAD(0x0450, 0x013C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24 = IOMUX_PAD(0x0450, 0x013C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10 = IOMUX_PAD(0x0450, 0x013C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 = IOMUX_PAD(0x0454, 0x0140, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2 = IOMUX_PAD(0x0454, 0x0140, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC = IOMUX_PAD(0x0454, 0x0140, 2, 0x08DC, 1, 0),
+ MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 = IOMUX_PAD(0x0454, 0x0140, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 = IOMUX_PAD(0x0454, 0x0140, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA11__GPIO_3_11 = IOMUX_PAD(0x0454, 0x0140, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25 = IOMUX_PAD(0x0454, 0x0140, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0454, 0x0140, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 = IOMUX_PAD(0x0458, 0x0144, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3 = IOMUX_PAD(0x0458, 0x0144, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC = IOMUX_PAD(0x0458, 0x0144, 2, 0x08E4, 1, 0),
+ MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 = IOMUX_PAD(0x0458, 0x0144, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 = IOMUX_PAD(0x0458, 0x0144, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA12__GPIO_3_12 = IOMUX_PAD(0x0458, 0x0144, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26 = IOMUX_PAD(0x0458, 0x0144, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0458, 0x0144, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 = IOMUX_PAD(0x045C, 0x0148, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS = IOMUX_PAD(0x045C, 0x0148, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x045C, 0x0148, 2, 0x07EC, 1, 0),
+ MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 = IOMUX_PAD(0x045C, 0x0148, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 = IOMUX_PAD(0x045C, 0x0148, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA13__GPIO_3_13 = IOMUX_PAD(0x045C, 0x0148, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27 = IOMUX_PAD(0x045C, 0x0148, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13 = IOMUX_PAD(0x045C, 0x0148, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 = IOMUX_PAD(0x0460, 0x014C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS = IOMUX_PAD(0x0460, 0x014C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x0460, 0x014C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 = IOMUX_PAD(0x0460, 0x014C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 = IOMUX_PAD(0x0460, 0x014C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA14__GPIO_3_14 = IOMUX_PAD(0x0460, 0x014C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28 = IOMUX_PAD(0x0460, 0x014C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14 = IOMUX_PAD(0x0460, 0x014C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 = IOMUX_PAD(0x0464, 0x0150, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1 = IOMUX_PAD(0x0464, 0x0150, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4 = IOMUX_PAD(0x0464, 0x0150, 2, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 = IOMUX_PAD(0x0464, 0x0150, 3, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA15__GPIO_3_15 = IOMUX_PAD(0x0464, 0x0150, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29 = IOMUX_PAD(0x0464, 0x0150, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0464, 0x0150, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT = IOMUX_PAD(0x0468, 0x0154, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B = IOMUX_PAD(0x0468, 0x0154, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_WAIT__GPIO_5_0 = IOMUX_PAD(0x0468, 0x0154, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30 = IOMUX_PAD(0x0468, 0x0154, 6, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25 = IOMUX_PAD(0x0468, 0x0154, 7, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK = IOMUX_PAD(0x046C, 0x0158, 0, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0),
+ MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 = IOMUX_PAD(0x0478, 0x0164, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 = IOMUX_PAD(0x047C, 0x0168, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__GPIO_4_19 = IOMUX_PAD(0x047C, 0x0168, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 = IOMUX_PAD(0x047C, 0x0168, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10 = IOMUX_PAD(0x047C, 0x0168, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0),
+ MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL = IOMUX_PAD(0x0488, 0x0174, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x048C, 0x0178, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR = IOMUX_PAD(0x0490, 0x017C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x0494, 0x0180, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS = IOMUX_PAD(0x0498, 0x0184, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT = IOMUX_PAD(0x049C, 0x0188, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 = IOMUX_PAD(0x04A0, 0x018C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 = IOMUX_PAD(0x04A4, 0x0190, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 = IOMUX_PAD(0x04A8, 0x0194, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0),
+ MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0),
+ MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0),
+ MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0),
+ MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 = IOMUX_PAD(0x04C0, 0x01AC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0),
+ MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0),
+ MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x04C4, 0x01B0, 4, 0x090C, 0, 0),
+ MX6Q_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0),
+ MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0),
+ MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x04C8, 0x01B4, 4, 0x0910, 0, 0),
+ MX6Q_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0),
+ MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0),
+ MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x04CC, 0x01B8, 4, 0x07C0, 0, 0),
+ MX6Q_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0),
+ MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0),
+ MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x04D0, 0x01BC, 4, 0x07BC, 0, 0),
+ MX6Q_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0),
+ MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0),
+ MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 = IOMUX_PAD(0x04D4, 0x01C0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0),
+ MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0),
+ MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 = IOMUX_PAD(0x04D8, 0x01C4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0),
+ MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0),
+ MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 = IOMUX_PAD(0x04DC, 0x01C8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0),
+ MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0),
+ MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 = IOMUX_PAD(0x04E0, 0x01CC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT23__GPIO_5_17 = IOMUX_PAD(0x04E0, 0x01CC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28 = IOMUX_PAD(0x04E0, 0x01CC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31 = IOMUX_PAD(0x04E0, 0x01CC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED = IOMUX_PAD(0x04E4, 0x01D0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x04E4, 0x01D0, 1, 0x0840, 0, 0),
+ MX6Q_PAD_ENET_MDIO__ESAI1_SCKR = IOMUX_PAD(0x04E4, 0x01D0, 2, 0x086C, 0, 0),
+ MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 = IOMUX_PAD(0x04E4, 0x01D0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT = IOMUX_PAD(0x04E4, 0x01D0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDIO__GPIO_1_22 = IOMUX_PAD(0x04E4, 0x01D0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK = IOMUX_PAD(0x04E4, 0x01D0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED = IOMUX_PAD(0x04E8, 0x01D4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x04E8, 0x01D4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x04E8, 0x01D4, 2, 0x085C, 0, 0),
+ MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 = IOMUX_PAD(0x04E8, 0x01D4, 3, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_REF_CLK__GPIO_1_23 = IOMUX_PAD(0x04E8, 0x01D4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK = IOMUX_PAD(0x04E8, 0x01D4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH = IOMUX_PAD(0x04E8, 0x01D4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RX_ER__ENET_RX_ER = IOMUX_PAD(0x04EC, 0x01D8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x04EC, 0x01D8, 2, 0x0864, 0, 0),
+ MX6Q_PAD_ENET_RX_ER__SPDIF_IN1 = IOMUX_PAD(0x04EC, 0x01D8, 3, 0x0914, 1, 0),
+ MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT = IOMUX_PAD(0x04EC, 0x01D8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RX_ER__GPIO_1_24 = IOMUX_PAD(0x04EC, 0x01D8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RX_ER__PHY_TDI = IOMUX_PAD(0x04EC, 0x01D8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD = IOMUX_PAD(0x04EC, 0x01D8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED = IOMUX_PAD(0x04F0, 0x01DC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN = IOMUX_PAD(0x04F0, 0x01DC, 1, 0x0858, 1, 0),
+ MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x04F0, 0x01DC, 2, 0x0870, 0, 0),
+ MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK = IOMUX_PAD(0x04F0, 0x01DC, 3, 0x0918, 1, 0),
+ MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 = IOMUX_PAD(0x04F0, 0x01DC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_CRS_DV__PHY_TDO = IOMUX_PAD(0x04F0, 0x01DC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD = IOMUX_PAD(0x04F0, 0x01DC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD1__MLB_MLBSIG = IOMUX_PAD(0x04F4, 0x01E0, 0, 0x0908, 0, 0),
+ MX6Q_PAD_ENET_RXD1__ENET_RDATA_1 = IOMUX_PAD(0x04F4, 0x01E0, 1, 0x084C, 1, 0),
+ MX6Q_PAD_ENET_RXD1__ESAI1_FST = IOMUX_PAD(0x04F4, 0x01E0, 2, 0x0860, 0, 0),
+ MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT = IOMUX_PAD(0x04F4, 0x01E0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD1__GPIO_1_26 = IOMUX_PAD(0x04F4, 0x01E0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD1__PHY_TCK = IOMUX_PAD(0x04F4, 0x01E0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON = IOMUX_PAD(0x04F4, 0x01E0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT = IOMUX_PAD(0x04F8, 0x01E4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD0__ENET_RDATA_0 = IOMUX_PAD(0x04F8, 0x01E4, 1, 0x0848, 1, 0),
+ MX6Q_PAD_ENET_RXD0__ESAI1_HCKT = IOMUX_PAD(0x04F8, 0x01E4, 2, 0x0868, 0, 0),
+ MX6Q_PAD_ENET_RXD0__SPDIF_OUT1 = IOMUX_PAD(0x04F8, 0x01E4, 3, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x04F8, 0x01E4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD0__PHY_TMS = IOMUX_PAD(0x04F8, 0x01E4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV = IOMUX_PAD(0x04F8, 0x01E4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED = IOMUX_PAD(0x04FC, 0x01E8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TX_EN__ENET_TX_EN = IOMUX_PAD(0x04FC, 0x01E8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x04FC, 0x01E8, 2, 0x0880, 0, 0),
+ MX6Q_PAD_ENET_TX_EN__GPIO_1_28 = IOMUX_PAD(0x04FC, 0x01E8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI = IOMUX_PAD(0x04FC, 0x01E8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH = IOMUX_PAD(0x04FC, 0x01E8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD1__MLB_MLBCLK = IOMUX_PAD(0x0500, 0x01EC, 0, 0x0900, 0, 0),
+ MX6Q_PAD_ENET_TXD1__ENET_TDATA_1 = IOMUX_PAD(0x0500, 0x01EC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x0500, 0x01EC, 2, 0x087C, 0, 0),
+ MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN = IOMUX_PAD(0x0500, 0x01EC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD1__GPIO_1_29 = IOMUX_PAD(0x0500, 0x01EC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO = IOMUX_PAD(0x0500, 0x01EC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD = IOMUX_PAD(0x0500, 0x01EC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED = IOMUX_PAD(0x0504, 0x01F0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD0__ENET_TDATA_0 = IOMUX_PAD(0x0504, 0x01F0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x0504, 0x01F0, 2, 0x0884, 0, 0),
+ MX6Q_PAD_ENET_TXD0__GPIO_1_30 = IOMUX_PAD(0x0504, 0x01F0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK = IOMUX_PAD(0x0504, 0x01F0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD = IOMUX_PAD(0x0504, 0x01F0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDC__MLB_MLBDAT = IOMUX_PAD(0x0508, 0x01F4, 0, 0x0904, 0, 0),
+ MX6Q_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x0508, 0x01F4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x0508, 0x01F4, 2, 0x0888, 0, 0),
+ MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN = IOMUX_PAD(0x0508, 0x01F4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDC__GPIO_1_31 = IOMUX_PAD(0x0508, 0x01F4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDC__SATA_PHY_TMS = IOMUX_PAD(0x0508, 0x01F4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON = IOMUX_PAD(0x0508, 0x01F4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 = IOMUX_PAD(0x050C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 = IOMUX_PAD(0x0510, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 = IOMUX_PAD(0x0514, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 = IOMUX_PAD(0x0518, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 = IOMUX_PAD(0x051C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 = IOMUX_PAD(0x0520, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 = IOMUX_PAD(0x0524, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 = IOMUX_PAD(0x0528, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0 = IOMUX_PAD(0x052C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1 = IOMUX_PAD(0x0530, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2 = IOMUX_PAD(0x0534, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3 = IOMUX_PAD(0x0538, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4 = IOMUX_PAD(0x053C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5 = IOMUX_PAD(0x0540, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6 = IOMUX_PAD(0x0544, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7 = IOMUX_PAD(0x0548, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8 = IOMUX_PAD(0x054C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9 = IOMUX_PAD(0x0550, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10 = IOMUX_PAD(0x0554, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11 = IOMUX_PAD(0x0558, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12 = IOMUX_PAD(0x055C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13 = IOMUX_PAD(0x0560, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14 = IOMUX_PAD(0x0564, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15 = IOMUX_PAD(0x0568, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS = IOMUX_PAD(0x056C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0 = IOMUX_PAD(0x0570, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1 = IOMUX_PAD(0x0574, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS = IOMUX_PAD(0x0578, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET = IOMUX_PAD(0x057C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 = IOMUX_PAD(0x0580, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 = IOMUX_PAD(0x0584, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 = IOMUX_PAD(0x0588, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 = IOMUX_PAD(0x058C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 = IOMUX_PAD(0x0590, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 = IOMUX_PAD(0x0594, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 = IOMUX_PAD(0x0598, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 = IOMUX_PAD(0x059C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 = IOMUX_PAD(0x05A0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE = IOMUX_PAD(0x05A4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 = IOMUX_PAD(0x05A8, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 = IOMUX_PAD(0x05AC, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 = IOMUX_PAD(0x05B0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 = IOMUX_PAD(0x05B4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 = IOMUX_PAD(0x05B8, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 = IOMUX_PAD(0x05BC, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 = IOMUX_PAD(0x05C0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 = IOMUX_PAD(0x05C4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x05C8, 0x01F8, 0, 0x07F4, 2, 0),
+ MX6Q_PAD_KEY_COL0__ENET_RDATA_3 = IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0854, 1, 0),
+ MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x07DC, 1, 0),
+ MX6Q_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL0__UART4_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0),
+ MX6Q_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x05CC, 0x01FC, 0, 0x07FC, 2, 0),
+ MX6Q_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x07D0, 1, 0),
+ MX6Q_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x05CC, 0x01FC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW0__UART4_TXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0938, 1, 0),
+ MX6Q_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0 = IOMUX_PAD(0x05CC, 0x01FC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x05D0, 0x0200, 0, 0x07F8, 2, 0),
+ MX6Q_PAD_KEY_COL1__ENET_MDIO = IOMUX_PAD(0x05D0, 0x0200, 1, 0x0840, 1, 0),
+ MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x05D0, 0x0200, 2, 0x07E0, 1, 0),
+ MX6Q_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x05D0, 0x0200, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL1__UART5_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0),
+ MX6Q_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x05D0, 0x0200, 6, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1 = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x05D4, 0x0204, 0, 0x0800, 2, 0),
+ MX6Q_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x05D4, 0x0204, 2, 0x07CC, 1, 0),
+ MX6Q_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x05D4, 0x0204, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW1__UART5_TXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0940, 1, 0),
+ MX6Q_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x05D4, 0x0204, 6, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2 = IOMUX_PAD(0x05D4, 0x0204, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x05D8, 0x0208, 0, 0x0804, 2, 0),
+ MX6Q_PAD_KEY_COL2__ENET_RDATA_2 = IOMUX_PAD(0x05D8, 0x0208, 1, 0x0850, 1, 0),
+ MX6Q_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x05D8, 0x0208, 2, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x05D8, 0x0208, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL2__ENET_MDC = IOMUX_PAD(0x05D8, 0x0208, 4, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL2__GPIO_4_10 = IOMUX_PAD(0x05D8, 0x0208, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP = IOMUX_PAD(0x05D8, 0x0208, 6, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3 = IOMUX_PAD(0x05D8, 0x0208, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x05DC, 0x020C, 0, 0x0808, 1, 0),
+ MX6Q_PAD_KEY_ROW2__ENET_TDATA_2 = IOMUX_PAD(0x05DC, 0x020C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x05DC, 0x020C, 2, 0x07E4, 0, 0),
+ MX6Q_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x05DC, 0x020C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT = IOMUX_PAD(0x05DC, 0x020C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW2__GPIO_4_11 = IOMUX_PAD(0x05DC, 0x020C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE = IOMUX_PAD(0x05DC, 0x020C, 6, 0x088C, 1, 0),
+ MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4 = IOMUX_PAD(0x05DC, 0x020C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x05E0, 0x0210, 0, 0x080C, 1, 0),
+ MX6Q_PAD_KEY_COL3__ENET_CRS = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL = IOMUX_PAD(0x05E0, 0x0210, 2, 0x0890, 1, 0),
+ MX6Q_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x05E0, 0x0210, 20, 0x08A0, 1, 0),
+ MX6Q_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0914, 2, 0),
+ MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5 = IOMUX_PAD(0x05E0, 0x0210, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x05E4, 0x0214, 0, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05E4, 0x0214, 1, 0x07B0, 0, 0),
+ MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA = IOMUX_PAD(0x05E4, 0x0214, 2, 0x0894, 1, 0),
+ MX6Q_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x05E4, 0x0214, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x05E4, 0x0214, 20, 0x08A4, 1, 0),
+ MX6Q_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT = IOMUX_PAD(0x05E4, 0x0214, 6, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6 = IOMUX_PAD(0x05E4, 0x0214, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x05E8, 0x0218, 0, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL4__IPU1_SISG_4 = IOMUX_PAD(0x05E8, 0x0218, 1, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x05E8, 0x0218, 2, 0x0944, 1, 0),
+ MX6Q_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x05E8, 0x0218, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL4__UART5_CTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x093C, 0, 0),
+ MX6Q_PAD_KEY_COL4__GPIO_4_14 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49 = IOMUX_PAD(0x05E8, 0x0218, 6, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7 = IOMUX_PAD(0x05E8, 0x0218, 7, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x05EC, 0x021C, 0, 0x07E8, 0, 0),
+ MX6Q_PAD_KEY_ROW4__IPU1_SISG_5 = IOMUX_PAD(0x05EC, 0x021C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x05EC, 0x021C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x05EC, 0x021C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x05EC, 0x021C, 4, 0x093C, 1, 0),
+ MX6Q_PAD_KEY_ROW4__GPIO_4_15 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50 = IOMUX_PAD(0x05EC, 0x021C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8 = IOMUX_PAD(0x05EC, 0x021C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x05F0, 0x0220, 0, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x05F0, 0x0220, 2, 0x08E8, 0, 0),
+ MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05F0, 0x0220, 3, 0x07B0, 1, 0),
+ MX6Q_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x05F0, 0x0220, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_0__GPIO_1_0 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x05F0, 0x0220, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 = IOMUX_PAD(0x05F0, 0x0220, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0),
+ MX6Q_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0),
+ MX6Q_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x05F4, 0x0224, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x05F8, 0x0228, 0, 0x085C, 1, 0),
+ MX6Q_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x05F8, 0x0228, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x05F8, 0x0228, 2, 0x08EC, 0, 0),
+ MX6Q_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x05F8, 0x0228, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x05F8, 0x0228, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_9__GPIO_1_9 = IOMUX_PAD(0x05F8, 0x0228, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_9__USDHC1_WP = IOMUX_PAD(0x05F8, 0x0228, 6, 0x094C, 1, 0),
+ MX6Q_PAD_GPIO_9__SRC_EARLY_RST = IOMUX_PAD(0x05F8, 0x0228, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x05FC, 0x022C, 0, 0x0864, 1, 0),
+ MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 = IOMUX_PAD(0x05FC, 0x022C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x05FC, 0x022C, 18, 0x08A8, 1, 0),
+ MX6Q_PAD_GPIO_3__ANATOP_24M_OUT = IOMUX_PAD(0x05FC, 0x022C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x05FC, 0x022C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_3__GPIO_1_3 = IOMUX_PAD(0x05FC, 0x022C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x05FC, 0x022C, 6, 0x0948, 1, 0),
+ MX6Q_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x05FC, 0x022C, 7, 0x0900, 1, 0),
+ MX6Q_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x0600, 0x0230, 0, 0x0870, 1, 0),
+ MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 = IOMUX_PAD(0x0600, 0x0230, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x0600, 0x0230, 18, 0x08AC, 1, 0),
+ MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x0600, 0x0230, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x0600, 0x0230, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_6__GPIO_1_6 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_6__USDHC2_LCTL = IOMUX_PAD(0x0600, 0x0230, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x0600, 0x0230, 7, 0x0908, 1, 0),
+ MX6Q_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x0604, 0x0234, 0, 0x0860, 1, 0),
+ MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 = IOMUX_PAD(0x0604, 0x0234, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x0604, 0x0234, 2, 0x08F8, 1, 0),
+ MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x0604, 0x0234, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x0604, 0x0234, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x0604, 0x0234, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_2__USDHC2_WP = IOMUX_PAD(0x0604, 0x0234, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x0604, 0x0234, 7, 0x0904, 1, 0),
+ MX6Q_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x0608, 0x0238, 0, 0x0868, 1, 0),
+ MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 = IOMUX_PAD(0x0608, 0x0238, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x0608, 0x0238, 2, 0x08F0, 1, 0),
+ MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x0608, 0x0238, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_4__GPIO_1_4 = IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_4__USDHC2_CD = IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x060C, 0x023C, 0, 0x087C, 1, 0),
+ MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 = IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x060C, 0x023C, 2, 0x08FC, 1, 0),
+ MX6Q_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x060C, 0x023C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x060C, 0x023C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x060C, 0x023C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x060C, 0x023C, 22, 0x08A8, 2, 0),
+ MX6Q_PAD_GPIO_5__CHEETAH_EVENTI = IOMUX_PAD(0x060C, 0x023C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x0610, 0x0240, 0, 0x0884, 1, 0),
+ MX6Q_PAD_GPIO_7__ECSPI5_RDY = IOMUX_PAD(0x0610, 0x0240, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0610, 0x0240, 2, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_7__UART2_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0),
+ MX6Q_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0610, 0x0240, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x0614, 0x0244, 0, 0x0888, 1, 0),
+ MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x0614, 0x0244, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x0614, 0x0244, 2, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x0614, 0x0244, 3, 0x07E4, 1, 0),
+ MX6Q_PAD_GPIO_8__UART2_TXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0928, 3, 0),
+ MX6Q_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x0614, 0x0244, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x0614, 0x0244, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK = IOMUX_PAD(0x0614, 0x0244, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x0618, 0x0248, 0, 0x0880, 1, 0),
+ MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN = IOMUX_PAD(0x0618, 0x0248, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0),
+ MX6Q_PAD_GPIO_16__USDHC1_LCTL = IOMUX_PAD(0x0618, 0x0248, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x0618, 0x0248, 4, 0x0914, 3, 0),
+ MX6Q_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x0618, 0x0248, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x0618, 0x0248, 22, 0x08AC, 2, 0),
+ MX6Q_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x0618, 0x0248, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x061C, 0x024C, 0, 0x0874, 0, 0),
+ MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN = IOMUX_PAD(0x061C, 0x024C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_17__CCM_PMIC_RDY = IOMUX_PAD(0x061C, 0x024C, 2, 0x07F0, 1, 0),
+ MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x061C, 0x024C, 3, 0x090C, 1, 0),
+ MX6Q_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x061C, 0x024C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x061C, 0x024C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x061C, 0x024C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x0620, 0x0250, 0, 0x0878, 0, 0),
+ MX6Q_PAD_GPIO_18__ENET_RX_CLK = IOMUX_PAD(0x0620, 0x0250, 1, 0x0844, 1, 0),
+ MX6Q_PAD_GPIO_18__USDHC3_VSELECT = IOMUX_PAD(0x0620, 0x0250, 2, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x0620, 0x0250, 3, 0x0910, 1, 0),
+ MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x0620, 0x0250, 4, 0x07B0, 2, 0),
+ MX6Q_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x0620, 0x0250, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 = IOMUX_PAD(0x0620, 0x0250, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x0620, 0x0250, 7, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x0624, 0x0254, 0, 0x08E8, 1, 0),
+ MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT = IOMUX_PAD(0x0624, 0x0254, 1, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x0624, 0x0254, 2, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x0624, 0x0254, 3, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x0624, 0x0254, 4, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x0624, 0x0254, 5, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_19__ENET_TX_ER = IOMUX_PAD(0x0624, 0x0254, 6, 0x0000, 0, 0),
+ MX6Q_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x0624, 0x0254, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK = IOMUX_PAD(0x0628, 0x0258, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 = IOMUX_PAD(0x0628, 0x0258, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x0628, 0x0258, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18 = IOMUX_PAD(0x0628, 0x0258, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 = IOMUX_PAD(0x0628, 0x0258, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO = IOMUX_PAD(0x0628, 0x0258, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC = IOMUX_PAD(0x062C, 0x025C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 = IOMUX_PAD(0x062C, 0x025C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_MCLK__CCM_CLKO = IOMUX_PAD(0x062C, 0x025C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x062C, 0x025C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_MCLK__GPIO_5_19 = IOMUX_PAD(0x062C, 0x025C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 = IOMUX_PAD(0x062C, 0x025C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL = IOMUX_PAD(0x062C, 0x025C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN = IOMUX_PAD(0x0630, 0x0260, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 = IOMUX_PAD(0x0630, 0x0260, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 = IOMUX_PAD(0x0630, 0x0260, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x0630, 0x0260, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20 = IOMUX_PAD(0x0630, 0x0260, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 = IOMUX_PAD(0x0630, 0x0260, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK = IOMUX_PAD(0x0630, 0x0260, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC = IOMUX_PAD(0x0634, 0x0264, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 = IOMUX_PAD(0x0634, 0x0264, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 = IOMUX_PAD(0x0634, 0x0264, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x0634, 0x0264, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_VSYNC__GPIO_5_21 = IOMUX_PAD(0x0634, 0x0264, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32 = IOMUX_PAD(0x0634, 0x0264, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 = IOMUX_PAD(0x0634, 0x0264, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4 = IOMUX_PAD(0x0638, 0x0268, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2 = IOMUX_PAD(0x0638, 0x0268, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x0638, 0x0268, 2, 0x07F4, 3, 0),
+ MX6Q_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x0638, 0x0268, 3, 0x08E8, 2, 0),
+ MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0638, 0x0268, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT4__GPIO_5_22 = IOMUX_PAD(0x0638, 0x0268, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43 = IOMUX_PAD(0x0638, 0x0268, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1 = IOMUX_PAD(0x0638, 0x0268, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5 = IOMUX_PAD(0x063C, 0x026C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3 = IOMUX_PAD(0x063C, 0x026C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x063C, 0x026C, 2, 0x07FC, 3, 0),
+ MX6Q_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x063C, 0x026C, 3, 0x08F4, 1, 0),
+ MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x063C, 0x026C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT5__GPIO_5_23 = IOMUX_PAD(0x063C, 0x026C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 = IOMUX_PAD(0x063C, 0x026C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2 = IOMUX_PAD(0x063C, 0x026C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6 = IOMUX_PAD(0x0640, 0x0270, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4 = IOMUX_PAD(0x0640, 0x0270, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x0640, 0x0270, 2, 0x07F8, 3, 0),
+ MX6Q_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x0640, 0x0270, 3, 0x08EC, 1, 0),
+ MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0640, 0x0270, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT6__GPIO_5_24 = IOMUX_PAD(0x0640, 0x0270, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 = IOMUX_PAD(0x0640, 0x0270, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3 = IOMUX_PAD(0x0640, 0x0270, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7 = IOMUX_PAD(0x0644, 0x0274, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5 = IOMUX_PAD(0x0644, 0x0274, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x0644, 0x0274, 2, 0x0800, 3, 0),
+ MX6Q_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x0644, 0x0274, 3, 0x08F8, 2, 0),
+ MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0644, 0x0274, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT7__GPIO_5_25 = IOMUX_PAD(0x0644, 0x0274, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 = IOMUX_PAD(0x0644, 0x0274, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4 = IOMUX_PAD(0x0644, 0x0274, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8 = IOMUX_PAD(0x0648, 0x0278, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6 = IOMUX_PAD(0x0648, 0x0278, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x0648, 0x0278, 2, 0x0810, 2, 0),
+ MX6Q_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x0648, 0x0278, 3, 0x08F0, 2, 0),
+ MX6Q_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x0648, 0x0278, 20, 0x089C, 1, 0),
+ MX6Q_PAD_CSI0_DAT8__GPIO_5_26 = IOMUX_PAD(0x0648, 0x0278, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 = IOMUX_PAD(0x0648, 0x0278, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5 = IOMUX_PAD(0x0648, 0x0278, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9 = IOMUX_PAD(0x064C, 0x027C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7 = IOMUX_PAD(0x064C, 0x027C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x064C, 0x027C, 2, 0x0818, 2, 0),
+ MX6Q_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x064C, 0x027C, 3, 0x08FC, 2, 0),
+ MX6Q_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x064C, 0x027C, 20, 0x0898, 1, 0),
+ MX6Q_PAD_CSI0_DAT9__GPIO_5_27 = IOMUX_PAD(0x064C, 0x027C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 = IOMUX_PAD(0x064C, 0x027C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6 = IOMUX_PAD(0x064C, 0x027C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10 = IOMUX_PAD(0x0650, 0x0280, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0650, 0x0280, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0650, 0x0280, 2, 0x0814, 2, 0),
+ MX6Q_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT10__UART1_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0),
+ MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0650, 0x0280, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0650, 0x0280, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0650, 0x0280, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7 = IOMUX_PAD(0x0650, 0x0280, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0654, 0x0284, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0654, 0x0284, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0654, 0x0284, 2, 0x081C, 2, 0),
+ MX6Q_PAD_CSI0_DAT11__UART1_TXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0920, 1, 0),
+ MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0654, 0x0284, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0654, 0x0284, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 = IOMUX_PAD(0x0654, 0x0284, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8 = IOMUX_PAD(0x0654, 0x0284, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12 = IOMUX_PAD(0x0658, 0x0288, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0658, 0x0288, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 = IOMUX_PAD(0x0658, 0x0288, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT12__UART4_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0),
+ MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0658, 0x0288, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0658, 0x0288, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0658, 0x0288, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9 = IOMUX_PAD(0x0658, 0x0288, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x065C, 0x028C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x065C, 0x028C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 = IOMUX_PAD(0x065C, 0x028C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT13__UART4_TXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0938, 3, 0),
+ MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x065C, 0x028C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x065C, 0x028C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 = IOMUX_PAD(0x065C, 0x028C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10 = IOMUX_PAD(0x065C, 0x028C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14 = IOMUX_PAD(0x0660, 0x0290, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0660, 0x0290, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 = IOMUX_PAD(0x0660, 0x0290, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT14__UART5_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0),
+ MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0660, 0x0290, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0660, 0x0290, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0660, 0x0290, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11 = IOMUX_PAD(0x0660, 0x0290, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0664, 0x0294, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0664, 0x0294, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 = IOMUX_PAD(0x0664, 0x0294, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT15__UART5_TXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0940, 3, 0),
+ MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0664, 0x0294, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0664, 0x0294, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 = IOMUX_PAD(0x0664, 0x0294, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12 = IOMUX_PAD(0x0664, 0x0294, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16 = IOMUX_PAD(0x0668, 0x0298, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12 = IOMUX_PAD(0x0668, 0x0298, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 = IOMUX_PAD(0x0668, 0x0298, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__UART4_CTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0934, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x0668, 0x0298, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__GPIO_6_2 = IOMUX_PAD(0x0668, 0x0298, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 = IOMUX_PAD(0x0668, 0x0298, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13 = IOMUX_PAD(0x0668, 0x0298, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17 = IOMUX_PAD(0x066C, 0x029C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13 = IOMUX_PAD(0x066C, 0x029C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 = IOMUX_PAD(0x066C, 0x029C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x066C, 0x029C, 3, 0x0934, 1, 0),
+ MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x066C, 0x029C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT17__GPIO_6_3 = IOMUX_PAD(0x066C, 0x029C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 = IOMUX_PAD(0x066C, 0x029C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14 = IOMUX_PAD(0x066C, 0x029C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18 = IOMUX_PAD(0x0670, 0x02A0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14 = IOMUX_PAD(0x0670, 0x02A0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 = IOMUX_PAD(0x0670, 0x02A0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT18__UART5_CTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x093C, 2, 0),
+ MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0670, 0x02A0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT18__GPIO_6_4 = IOMUX_PAD(0x0670, 0x02A0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 = IOMUX_PAD(0x0670, 0x02A0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15 = IOMUX_PAD(0x0670, 0x02A0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19 = IOMUX_PAD(0x0674, 0x02A4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15 = IOMUX_PAD(0x0674, 0x02A4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 = IOMUX_PAD(0x0674, 0x02A4, 2, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x0674, 0x02A4, 3, 0x093C, 3, 0),
+ MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0674, 0x02A4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT19__GPIO_6_5 = IOMUX_PAD(0x0674, 0x02A4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 = IOMUX_PAD(0x0674, 0x02A4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9 = IOMUX_PAD(0x0674, 0x02A4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x0678, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x067C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB = IOMUX_PAD(0x0680, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x0684, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x0688, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x068C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_POR_B__SRC_POR_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_RESET_IN_B__SRC_RESET_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT7__UART1_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0),
+ MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT7__GPIO_6_17 = IOMUX_PAD(0x0690, 0x02A8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV = IOMUX_PAD(0x0690, 0x02A8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT6__UART1_TXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0920, 3, 0),
+ MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 = IOMUX_PAD(0x0694, 0x02AC, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT6__GPIO_6_18 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 = IOMUX_PAD(0x0694, 0x02AC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10 = IOMUX_PAD(0x0694, 0x02AC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT5__UART2_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0),
+ MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 = IOMUX_PAD(0x0698, 0x02B0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11 = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT4__UART2_TXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0928, 5, 0),
+ MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 = IOMUX_PAD(0x069C, 0x02B4, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT4__GPIO_7_1 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 = IOMUX_PAD(0x069C, 0x02B4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12 = IOMUX_PAD(0x069C, 0x02B4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06A0, 0x02B8, 16, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CMD__UART2_CTS = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0924, 2, 0),
+ MX6Q_PAD_SD3_CMD__CAN1_TXCAN = IOMUX_PAD(0x06A0, 0x02B8, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CMD__GPIO_7_2 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 = IOMUX_PAD(0x06A0, 0x02B8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13 = IOMUX_PAD(0x06A0, 0x02B8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06A4, 0x02BC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CLK__UART2_CTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CLK__UART2_RTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0924, 3, 0),
+ MX6Q_PAD_SD3_CLK__CAN1_RXCAN = IOMUX_PAD(0x06A4, 0x02BC, 2, 0x07E4, 2, 0),
+ MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CLK__GPIO_7_3 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 = IOMUX_PAD(0x06A4, 0x02BC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14 = IOMUX_PAD(0x06A4, 0x02BC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06A8, 0x02C0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT0__UART1_CTS = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x091C, 2, 0),
+ MX6Q_PAD_SD3_DAT0__CAN2_TXCAN = IOMUX_PAD(0x06A8, 0x02C0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT0__GPIO_7_4 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 = IOMUX_PAD(0x06A8, 0x02C0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15 = IOMUX_PAD(0x06A8, 0x02C0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x06AC, 0x02C4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT1__UART1_CTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT1__UART1_RTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x091C, 3, 0),
+ MX6Q_PAD_SD3_DAT1__CAN2_RXCAN = IOMUX_PAD(0x06AC, 0x02C4, 2, 0x07E8, 1, 0),
+ MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT1__GPIO_7_5 = IOMUX_PAD(0x06AC, 0x02C4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 = IOMUX_PAD(0x06AC, 0x02C4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0 = IOMUX_PAD(0x06AC, 0x02C4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x06B0, 0x02C8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 = IOMUX_PAD(0x06B0, 0x02C8, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT2__GPIO_7_6 = IOMUX_PAD(0x06B0, 0x02C8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 = IOMUX_PAD(0x06B0, 0x02C8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1 = IOMUX_PAD(0x06B0, 0x02C8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x06B4, 0x02CC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT3__UART3_CTS = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x092C, 4, 0),
+ MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 = IOMUX_PAD(0x06B4, 0x02CC, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT3__GPIO_7_7 = IOMUX_PAD(0x06B4, 0x02CC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 = IOMUX_PAD(0x06B4, 0x02CC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2 = IOMUX_PAD(0x06B4, 0x02CC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_RST__USDHC3_RST = IOMUX_PAD(0x06B8, 0x02D0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_RST__UART3_CTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_RST__UART3_RTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x092C, 5, 0),
+ MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30 = IOMUX_PAD(0x06B8, 0x02D0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_RST__GPIO_7_8 = IOMUX_PAD(0x06B8, 0x02D0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 = IOMUX_PAD(0x06B8, 0x02D0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 = IOMUX_PAD(0x06B8, 0x02D0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CLE__RAWNAND_CLE = IOMUX_PAD(0x06BC, 0x02D4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CLE__IPU2_SISG_4 = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 = IOMUX_PAD(0x06BC, 0x02D4, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CLE__GPIO_6_7 = IOMUX_PAD(0x06BC, 0x02D4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 = IOMUX_PAD(0x06BC, 0x02D4, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0 = IOMUX_PAD(0x06BC, 0x02D4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_ALE__RAWNAND_ALE = IOMUX_PAD(0x06C0, 0x02D8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_ALE__USDHC4_RST = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 = IOMUX_PAD(0x06C0, 0x02D8, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_ALE__GPIO_6_8 = IOMUX_PAD(0x06C0, 0x02D8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 = IOMUX_PAD(0x06C0, 0x02D8, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1 = IOMUX_PAD(0x06C0, 0x02D8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5 = IOMUX_PAD(0x06C4, 0x02DC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 = IOMUX_PAD(0x06C4, 0x02DC, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_WP_B__GPIO_6_9 = IOMUX_PAD(0x06C4, 0x02DC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 = IOMUX_PAD(0x06C4, 0x02DC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 = IOMUX_PAD(0x06C4, 0x02DC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 = IOMUX_PAD(0x06C8, 0x02E0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1 = IOMUX_PAD(0x06C8, 0x02E0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 = IOMUX_PAD(0x06C8, 0x02E0, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_RB0__GPIO_6_10 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 = IOMUX_PAD(0x06C8, 0x02E0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 = IOMUX_PAD(0x06C8, 0x02E0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS0__GPIO_6_11 = IOMUX_PAD(0x06CC, 0x02E4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 = IOMUX_PAD(0x06CC, 0x02E4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 = IOMUX_PAD(0x06D0, 0x02E8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x06D0, 0x02E8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT = IOMUX_PAD(0x06D0, 0x02E8, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS2__IPU1_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x06D4, 0x02EC, 2, 0x0874, 1, 0),
+ MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE = IOMUX_PAD(0x06D4, 0x02EC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS2__CCM_CLKO2 = IOMUX_PAD(0x06D4, 0x02EC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x06D4, 0x02EC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS2__IPU2_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS3__IPU1_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x06D8, 0x02F0, 2, 0x0878, 1, 0),
+ MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26 = IOMUX_PAD(0x06D8, 0x02F0, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 = IOMUX_PAD(0x06D8, 0x02F0, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS3__IPU2_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_CS3__TPSMP_CLK = IOMUX_PAD(0x06D8, 0x02F0, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x06DC, 0x02F4, 16, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x06DC, 0x02F4, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CMD__UART3_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0),
+ MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR = IOMUX_PAD(0x06DC, 0x02F4, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x06E0, 0x02F8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x06E0, 0x02F8, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CLK__UART3_TXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0930, 3, 0),
+ MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D0__RAWNAND_D0 = IOMUX_PAD(0x06E4, 0x02FC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D0__USDHC1_DAT4 = IOMUX_PAD(0x06E4, 0x02FC, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 = IOMUX_PAD(0x06E4, 0x02FC, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D0__GPIO_2_0 = IOMUX_PAD(0x06E4, 0x02FC, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D1__RAWNAND_D1 = IOMUX_PAD(0x06E8, 0x0300, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D1__USDHC1_DAT5 = IOMUX_PAD(0x06E8, 0x0300, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 = IOMUX_PAD(0x06E8, 0x0300, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x06E8, 0x0300, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D2__RAWNAND_D2 = IOMUX_PAD(0x06EC, 0x0304, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D2__USDHC1_DAT6 = IOMUX_PAD(0x06EC, 0x0304, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 = IOMUX_PAD(0x06EC, 0x0304, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x06EC, 0x0304, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D3__RAWNAND_D3 = IOMUX_PAD(0x06F0, 0x0308, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D3__USDHC1_DAT7 = IOMUX_PAD(0x06F0, 0x0308, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 = IOMUX_PAD(0x06F0, 0x0308, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x06F0, 0x0308, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D4__RAWNAND_D4 = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D4__USDHC2_DAT4 = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 = IOMUX_PAD(0x06F4, 0x030C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x06F4, 0x030C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D5__RAWNAND_D5 = IOMUX_PAD(0x06F8, 0x0310, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D5__USDHC2_DAT5 = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 = IOMUX_PAD(0x06F8, 0x0310, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D5__GPIO_2_5 = IOMUX_PAD(0x06F8, 0x0310, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D6__RAWNAND_D6 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D6__USDHC2_DAT6 = IOMUX_PAD(0x06FC, 0x0314, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x06FC, 0x0314, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 7, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D7__RAWNAND_D7 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D7__USDHC2_DAT7 = IOMUX_PAD(0x0700, 0x0318, 1, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 2, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 3, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 4, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D7__GPIO_2_7 = IOMUX_PAD(0x0700, 0x0318, 5, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 6, 0x0000, 0, 0),
+ MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT0__RAWNAND_D8 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0704, 0x031C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT0__RAWNAND_DQS = IOMUX_PAD(0x0704, 0x031C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT0__GPIO_2_8 = IOMUX_PAD(0x0704, 0x031C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT1__RAWNAND_D9 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x0708, 0x0320, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT1__PWM3_PWMO = IOMUX_PAD(0x0708, 0x0320, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT1__GPIO_2_9 = IOMUX_PAD(0x0708, 0x0320, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT2__RAWNAND_D10 = IOMUX_PAD(0x070C, 0x0324, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x070C, 0x0324, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT2__PWM4_PWMO = IOMUX_PAD(0x070C, 0x0324, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT2__GPIO_2_10 = IOMUX_PAD(0x070C, 0x0324, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT3__RAWNAND_D11 = IOMUX_PAD(0x0710, 0x0328, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0710, 0x0328, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT3__GPIO_2_11 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT4__UART2_TXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0928, 6, 0),
+ MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT4__GPIO_2_12 = IOMUX_PAD(0x0714, 0x032C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT5__RAWNAND_D13 = IOMUX_PAD(0x0718, 0x0330, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT5__UART2_CTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT5__UART2_RTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0924, 4, 0),
+ MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT5__GPIO_2_13 = IOMUX_PAD(0x0718, 0x0330, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT6__RAWNAND_D14 = IOMUX_PAD(0x071C, 0x0334, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 = IOMUX_PAD(0x071C, 0x0334, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT6__UART2_CTS = IOMUX_PAD(0x071C, 0x0334, 2, 0x0924, 5, 0),
+ MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT6__GPIO_2_14 = IOMUX_PAD(0x071C, 0x0334, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0720, 0x0338, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT7__UART2_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0),
+ MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x0724, 0x033C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0724, 0x033C, 1, 0x0834, 1, 0),
+ MX6Q_PAD_SD1_DAT1__PWM3_PWMO = IOMUX_PAD(0x0724, 0x033C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT1__GPT_CAPIN2 = IOMUX_PAD(0x0724, 0x033C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 = IOMUX_PAD(0x0724, 0x033C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT1__GPIO_1_17 = IOMUX_PAD(0x0724, 0x033C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 = IOMUX_PAD(0x0724, 0x033C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8 = IOMUX_PAD(0x0724, 0x033C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x0728, 0x0340, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0728, 0x0340, 1, 0x082C, 1, 0),
+ MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS = IOMUX_PAD(0x0728, 0x0340, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT0__GPT_CAPIN1 = IOMUX_PAD(0x0728, 0x0340, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 = IOMUX_PAD(0x0728, 0x0340, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT0__GPIO_1_16 = IOMUX_PAD(0x0728, 0x0340, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 = IOMUX_PAD(0x0728, 0x0340, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7 = IOMUX_PAD(0x0728, 0x0340, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x072C, 0x0344, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3 = IOMUX_PAD(0x072C, 0x0344, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT3__PWM1_PWMO = IOMUX_PAD(0x072C, 0x0344, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B = IOMUX_PAD(0x072C, 0x0344, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x072C, 0x0344, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x072C, 0x0344, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6 = IOMUX_PAD(0x072C, 0x0344, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0730, 0x0348, 16, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0730, 0x0348, 1, 0x0830, 0, 0),
+ MX6Q_PAD_SD1_CMD__PWM4_PWMO = IOMUX_PAD(0x0730, 0x0348, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x0730, 0x0348, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x0730, 0x0348, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5 = IOMUX_PAD(0x0730, 0x0348, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x0734, 0x034C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0838, 1, 0),
+ MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2 = IOMUX_PAD(0x0734, 0x034C, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT2__PWM2_PWMO = IOMUX_PAD(0x0734, 0x034C, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B = IOMUX_PAD(0x0734, 0x034C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT2__GPIO_1_19 = IOMUX_PAD(0x0734, 0x034C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0734, 0x034C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4 = IOMUX_PAD(0x0734, 0x034C, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0738, 0x0350, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CLK__ECSPI5_SCLK = IOMUX_PAD(0x0738, 0x0350, 1, 0x0828, 0, 0),
+ MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT = IOMUX_PAD(0x0738, 0x0350, 2, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x0738, 0x0350, 3, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CLK__GPIO_1_20 = IOMUX_PAD(0x0738, 0x0350, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CLK__PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x073C, 0x0354, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_CLK__ECSPI5_SCLK = IOMUX_PAD(0x073C, 0x0354, 1, 0x0828, 1, 0),
+ MX6Q_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x073C, 0x0354, 2, 0x08E8, 3, 0),
+ MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x073C, 0x0354, 3, 0x07C0, 1, 0),
+ MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9 = IOMUX_PAD(0x073C, 0x0354, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_CLK__GPIO_1_10 = IOMUX_PAD(0x073C, 0x0354, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_CLK__PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 7, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0740, 0x0358, 16, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0740, 0x0358, 1, 0x0830, 1, 0),
+ MX6Q_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x0740, 0x0358, 2, 0x08F4, 2, 0),
+ MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x0740, 0x0358, 3, 0x07BC, 1, 0),
+ MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10 = IOMUX_PAD(0x0740, 0x0358, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_CMD__GPIO_1_11 = IOMUX_PAD(0x0740, 0x0358, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0744, 0x035C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 = IOMUX_PAD(0x0744, 0x035C, 1, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT3__KPP_COL_6 = IOMUX_PAD(0x0744, 0x035C, 2, 0x08EC, 2, 0),
+ MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x0744, 0x035C, 3, 0x07C4, 1, 0),
+ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 = IOMUX_PAD(0x0744, 0x035C, 4, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT3__GPIO_1_12 = IOMUX_PAD(0x0744, 0x035C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT3__SJC_DONE = IOMUX_PAD(0x0744, 0x035C, 6, 0x0000, 0, 0),
+ MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 = IOMUX_PAD(0x0744, 0x035C, 7, 0x0000, 0, 0),
+};
+
+#endif /* __ASM_ARCH_MX6_MX6X_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
new file mode 100644
index 0000000..668e77a
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
+
+u32 get_cpu_rev(void);
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+
+int fecmxc_initialize(bd_t *bis);
+
+#endif
--
1.7.4.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support
2011-11-18 7:11 [U-Boot] [PATCH V2 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
2011-11-18 7:11 ` [U-Boot] [PATCH V2 1/6] i.mx: introduce the armv7/imx-common folder Jason Liu
2011-11-18 7:11 ` [U-Boot] [PATCH V2 2/6] i.mx: add the initial support for freescale i.MX6Q processor Jason Liu
@ 2011-11-18 7:11 ` Jason Liu
[not found] ` <2EDAD32A5B0B85468ED77279EBEE99682586FB@039-SN1MPN1-001.039d.mgd.msft.net>
2011-11-18 20:00 ` Mike Frysinger
2011-11-18 7:11 ` [U-Boot] [PATCH V2 4/6] i.mx: serial_mxc: " Jason Liu
` (2 subsequent siblings)
5 siblings, 2 replies; 20+ messages in thread
From: Jason Liu @ 2011-11-18 7:11 UTC (permalink / raw)
To: u-boot
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
---
V2: add Stefano's ack
---
drivers/gpio/mxc_gpio.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index a7f36b2..908808d 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -40,10 +40,10 @@ static unsigned long gpio_ports[] = {
[0] = GPIO1_BASE_ADDR,
[1] = GPIO2_BASE_ADDR,
[2] = GPIO3_BASE_ADDR,
-#if defined(CONFIG_MX51) || defined(CONFIG_MX53)
+#if defined(CONFIG_MX51) || defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
[3] = GPIO4_BASE_ADDR,
#endif
-#if defined(CONFIG_MX53)
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
[4] = GPIO5_BASE_ADDR,
[5] = GPIO6_BASE_ADDR,
[6] = GPIO7_BASE_ADDR,
--
1.7.4.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 4/6] i.mx: serial_mxc: add the i.mx6q support
2011-11-18 7:11 [U-Boot] [PATCH V2 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
` (2 preceding siblings ...)
2011-11-18 7:11 ` [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support Jason Liu
@ 2011-11-18 7:11 ` Jason Liu
2011-11-21 14:51 ` Stefano Babic
2011-11-18 7:11 ` [U-Boot] [PATCH V2 5/6] i.mx: fsl_esdhc: " Jason Liu
2011-11-18 7:11 ` [U-Boot] [PATCH V2 6/6] i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board Jason Liu
5 siblings, 1 reply; 20+ messages in thread
From: Jason Liu @ 2011-11-18 7:11 UTC (permalink / raw)
To: u-boot
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
---
v2: Cc Stefano
---
drivers/serial/serial_mxc.c | 10 +++++++---
1 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index dcb4bd1..7d0f288 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -47,14 +47,18 @@
#elif defined(CONFIG_SYS_MX27_UART6)
#define UART_PHYS 0x1001c000
#elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \
- defined(CONFIG_SYS_MX53_UART1)
+ defined(CONFIG_SYS_MX53_UART1) || defined(CONFIG_MX6Q_UART1)
#define UART_PHYS UART1_BASE_ADDR
#elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \
- defined(CONFIG_SYS_MX53_UART2)
+ defined(CONFIG_SYS_MX53_UART2) || defined(CONFIG_MX6Q_UART2)
#define UART_PHYS UART2_BASE_ADDR
#elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \
- defined(CONFIG_SYS_MX53_UART3)
+ defined(CONFIG_SYS_MX53_UART3) || defined(CONFIG_MX6Q_UART3)
#define UART_PHYS UART3_BASE_ADDR
+#elif defined(CONFIG_MX6Q_UART4)
+#define UART_PHYS UART4_BASE_ADDR
+#elif defined(CONFIG_MX6Q_UART5)
+#define UART_PHYS UART5_BASE_ADDR
#else
#error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver"
#endif
--
1.7.4.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 5/6] i.mx: fsl_esdhc: add the i.mx6q support
2011-11-18 7:11 [U-Boot] [PATCH V2 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
` (3 preceding siblings ...)
2011-11-18 7:11 ` [U-Boot] [PATCH V2 4/6] i.mx: serial_mxc: " Jason Liu
@ 2011-11-18 7:11 ` Jason Liu
2011-11-24 16:23 ` Stefano Babic
2011-11-18 7:11 ` [U-Boot] [PATCH V2 6/6] i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board Jason Liu
5 siblings, 1 reply; 20+ messages in thread
From: Jason Liu @ 2011-11-18 7:11 UTC (permalink / raw)
To: u-boot
The mmc host controller on the i.mx6q is called usdhc which
is redesigned based on the freescale esdhc controller.
The usdhc controller is almost compatible with esdhc except
it adds one mix register to support debug/SD3.0 and move
the low bit 0-6 of XFERTYP register to the mix control reg
low bit 0-6. Thus on i.mx6q, we have the following compared
with the previous soc: (can refer to RM of chapter 56.3.3)
i.mx6q:
mix control:
bit 31 - bit 7: Added for debug/SD3.0 support
bit 6 - bit 0: move in the XFERTYP register bit 6-0 on previous soc
XFERTYP register:
bit 31 - bit 7: the same as before,
bit 6 - bit 0: no-use
previous soc
mix control: no
XFERTYP register:
bit 31 - bit 0: xfertype information
Signed-off-by: Jason Liu <jason.hui@linaro.org>
CC:Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
---
v2: extend the commit message by adding mix/xtertype register change
remove one #ifdef as Marek suggested
change the print of USDHC/ESDHC to SDHC
---
drivers/mmc/fsl_esdhc.c | 12 +++++++++---
1 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index ec953f0..ddd1b4c 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -58,7 +58,8 @@ struct fsl_esdhc {
uint autoc12err;
uint hostcapblt;
uint wml;
- char reserved1[8];
+ uint mixctrl;
+ char reserved1[4];
uint fevt;
char reserved2[168];
uint hostver;
@@ -298,8 +299,13 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
/* Send the command */
esdhc_write32(®s->cmdarg, cmd->cmdarg);
+#if defined(CONFIG_FSL_USDHC)
+ esdhc_write32(®s->mixctrl,
+ (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F));
+ esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000);
+#else
esdhc_write32(®s->xfertyp, xfertyp);
-
+#endif
/* Wait for the command to complete */
while (!(esdhc_read32(®s->irqstat) & IRQSTAT_CC))
;
@@ -482,7 +488,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
mmc = malloc(sizeof(struct mmc));
- sprintf(mmc->name, "FSL_ESDHC");
+ sprintf(mmc->name, "FSL_SDHC");
regs = (struct fsl_esdhc *)cfg->esdhc_base;
/* First reset the eSDHC controller */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 6/6] i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
2011-11-18 7:11 [U-Boot] [PATCH V2 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
` (4 preceding siblings ...)
2011-11-18 7:11 ` [U-Boot] [PATCH V2 5/6] i.mx: fsl_esdhc: " Jason Liu
@ 2011-11-18 7:11 ` Jason Liu
5 siblings, 0 replies; 20+ messages in thread
From: Jason Liu @ 2011-11-18 7:11 UTC (permalink / raw)
To: u-boot
Add the initial support for Freescale i.MX6Q Armadillo2 board
Support: MMC boot from slot 0/1, debug UART(UART4), usdhc.
There is two MMC slots on the boards:
mmc dev 0 -> connect USDHC3 -> the lower slot on the board,
mmc dev 1 -> connect USDHC4 -> the upper slot on the board,
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
---
v2:fix sd3 card detection GPIO
remove unneeded parentheses such as (IRAM_SIZE)
remove clean and distclean targets in Makefile
remove CONFIG_MACH_TYPE setup since linux use DT
some cleanup/improvement for the config file from Dirk
remove imx_iomux_v3_init call since assign the base in iomux-v3.c
improve the commit message to add the mmc slot description
---
MAINTAINERS | 1 +
board/freescale/mx6qarm2/Makefile | 42 ++++++++
board/freescale/mx6qarm2/imximage.cfg | 167 +++++++++++++++++++++++++++++++++
board/freescale/mx6qarm2/mx6qarm2.c | 155 ++++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/mx6qarm2.h | 162 ++++++++++++++++++++++++++++++++
6 files changed, 528 insertions(+), 0 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 030fe4a..4eab903 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -572,6 +572,7 @@ Jason Liu <r64343@freescale.com>
mx53evk i.MX53
mx53loco i.MX53
+ mx6qarm2 i.MX6Q
Enric Balletbo i Serra <eballetbo@iseebcn.com>
diff --git a/board/freescale/mx6qarm2/Makefile b/board/freescale/mx6qarm2/Makefile
new file mode 100644
index 0000000..79bc315
--- /dev/null
+++ b/board/freescale/mx6qarm2/Makefile
@@ -0,0 +1,42 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := mx6qarm2.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg
new file mode 100644
index 0000000..ffac1b4
--- /dev/null
+++ b/board/freescale/mx6qarm2/imximage.cfg
@@ -0,0 +1,167 @@
+# Copyright (C) 2011 Freescale Semiconductor, Inc.
+# Jason Liu <r64343@freescale.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# image version
+
+IMAGE_VERSION 2
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
+BOOT_FROM sd
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+DATA 4 0x020e05a8 0x00000030
+DATA 4 0x020e05b0 0x00000030
+DATA 4 0x020e0524 0x00000030
+DATA 4 0x020e051c 0x00000030
+
+DATA 4 0x020e0518 0x00000030
+DATA 4 0x020e050c 0x00000030
+DATA 4 0x020e05b8 0x00000030
+DATA 4 0x020e05c0 0x00000030
+
+DATA 4 0x020e05ac 0x00020030
+DATA 4 0x020e05b4 0x00020030
+DATA 4 0x020e0528 0x00020030
+DATA 4 0x020e0520 0x00020030
+
+DATA 4 0x020e0514 0x00020030
+DATA 4 0x020e0510 0x00020030
+DATA 4 0x020e05bc 0x00020030
+DATA 4 0x020e05c4 0x00020030
+
+DATA 4 0x020e056c 0x00020030
+DATA 4 0x020e0578 0x00020030
+DATA 4 0x020e0588 0x00020030
+DATA 4 0x020e0594 0x00020030
+
+DATA 4 0x020e057c 0x00020030
+DATA 4 0x020e0590 0x00003000
+DATA 4 0x020e0598 0x00003000
+DATA 4 0x020e058c 0x00000000
+
+DATA 4 0x020e059c 0x00003030
+DATA 4 0x020e05a0 0x00003030
+DATA 4 0x020e0784 0x00000030
+DATA 4 0x020e0788 0x00000030
+
+DATA 4 0x020e0794 0x00000030
+DATA 4 0x020e079c 0x00000030
+DATA 4 0x020e07a0 0x00000030
+DATA 4 0x020e07a4 0x00000030
+
+DATA 4 0x020e07a8 0x00000030
+DATA 4 0x020e0748 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e0750 0x00020000
+
+DATA 4 0x020e0758 0x00000000
+DATA 4 0x020e0774 0x00020000
+DATA 4 0x020e078c 0x00000030
+DATA 4 0x020e0798 0x000C0000
+
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+
+DATA 4 0x021b0018 0x00081740
+
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b000c 0x555A7975
+DATA 4 0x021b0010 0xFF538E64
+DATA 4 0x021b0014 0x01FF00DB
+DATA 4 0x021b002c 0x000026D2
+
+DATA 4 0x021b0030 0x005B0E21
+DATA 4 0x021b0008 0x09444040
+DATA 4 0x021b0004 0x00025576
+DATA 4 0x021b0040 0x00000027
+DATA 4 0x021b0000 0xC31A0000
+
+DATA 4 0x021b001c 0x04088032
+DATA 4 0x021b001c 0x0408803A
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x0000803B
+DATA 4 0x021b001c 0x00428031
+DATA 4 0x021b001c 0x00428039
+DATA 4 0x021b001c 0x09408030
+DATA 4 0x021b001c 0x09408038
+
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b001c 0x04008048
+DATA 4 0x021b0800 0xA1380003
+DATA 4 0x021b4800 0xA1380003
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00022227
+DATA 4 0x021b4818 0x00022227
+
+DATA 4 0x021b083c 0x434B0350
+DATA 4 0x021b0840 0x034C0359
+DATA 4 0x021b483c 0x434B0350
+DATA 4 0x021b4840 0x03650348
+DATA 4 0x021b0848 0x4436383B
+DATA 4 0x021b4848 0x39393341
+DATA 4 0x021b0850 0x35373933
+DATA 4 0x021b4850 0x48254A36
+
+DATA 4 0x021b080c 0x001F001F
+DATA 4 0x021b0810 0x001F001F
+
+DATA 4 0x021b480c 0x00440044
+DATA 4 0x021b4810 0x00440044
+
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+
+DATA 4 0x021b001c 0x00000000
+DATA 4 0x021b0404 0x00011006
+
+DATA 4 0x020e0010 0xF00000FF
+DATA 4 0x020e0018 0x00070007
+DATA 4 0x020e001c 0x00070007
+
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC00
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0x00FFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x000003FC
diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
new file mode 100644
index 0000000..89e0e76
--- /dev/null
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6x_pins.h>
+#include <asm/arch/iomux-v3.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+ return 0;
+}
+
+iomux_v3_cfg_t uart4_pads[] = {
+ MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+iomux_v3_cfg_t usdhc3_pads[] = {
+ MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+iomux_v3_cfg_t usdhc4_pads[] = {
+ MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg usdhc_cfg[2] = {
+ {USDHC3_BASE_ADDR, 1},
+ {USDHC4_BASE_ADDR, 1},
+};
+
+int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+ if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
+ gpio_direction_input(171); /*GPIO6_11*/
+ *cd = gpio_get_value(171);
+ } else /* Don't have the CD GPIO pin on board */
+ *cd = 0;
+
+ return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ s32 status = 0;
+ u32 index = 0;
+
+ for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
+ switch (index) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers"
+ "(%d) then supported by the board (%d)\n",
+ index + 1, CONFIG_SYS_FSL_USDHC_NUM);
+ return status;
+ }
+
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ }
+
+ return status;
+}
+#endif
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: MX6Q-Armadillo2\n");
+
+ return 0;
+}
diff --git a/boards.cfg b/boards.cfg
index 8b7a03b..9285913 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -174,6 +174,7 @@ mx53evk arm armv7 mx53evk freesca
mx53loco arm armv7 mx53loco freescale mx5 mx53loco:IMX_CONFIG=board/freescale/mx53loco/imximage.cfg
mx53smd arm armv7 mx53smd freescale mx5 mx53smd:IMX_CONFIG=board/freescale/mx53smd/imximage.cfg
vision2 arm armv7 vision2 ttcontrol mx5 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg
+mx6qarm2 arm armv7 mx6qarm2 freescale mx6 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
cm_t35 arm armv7 cm_t35 - omap3
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
new file mode 100644
index 0000000..9028063
--- /dev/null
+++ b/include/configs/mx6qarm2.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Freescale i.MX6Q Armadillo2 board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MX6Q
+#define CONFIG_SYS_MX6_HCLK 24000000
+#define CONFIG_SYS_MX6_CLK32 32768
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MX6Q_UART4
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_LOADADDR 0x10800000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
+ "console=ttymxc3\0" \
+ "mmcdev=1\0" \
+ "mmcpart=2\0" \
+ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "dhcp ${uimage}; bootm\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan ${mmcdev}; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "MX6QARM2 U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x10010000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE (128 * 1024)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1
+
+#define CONFIG_OF_LIBFDT
+
+#endif /* __CONFIG_H */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support
[not found] ` <2EDAD32A5B0B85468ED77279EBEE99682586FB@039-SN1MPN1-001.039d.mgd.msft.net>
@ 2011-11-18 7:30 ` Jason Hui
2011-11-18 10:18 ` Marek Vasut
0 siblings, 1 reply; 20+ messages in thread
From: Jason Hui @ 2011-11-18 7:30 UTC (permalink / raw)
To: u-boot
2011/11/18 Lv Terry-R65388 <r65388@freescale.com>:
> Hi Jason,
>
> ? ? ? ?What about using
>
> #ifdef GPIO4_BASE_ADDR
> ? ? ? ?[3] = GPIO4_BASE_ADDR,
> #endif
[...]
>
> ? ? ? ?Then we can avoid adding SOC compile options in future.
>
Terry, please don't top-post. As for your comments, I don't think so,
first, we should not simply use GPIOx_BASE_ADDR, and second,
it will introduce a lot of other platforms changes.
Jason Liu
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support
2011-11-18 7:30 ` Jason Hui
@ 2011-11-18 10:18 ` Marek Vasut
2011-11-18 12:26 ` Jason Hui
0 siblings, 1 reply; 20+ messages in thread
From: Marek Vasut @ 2011-11-18 10:18 UTC (permalink / raw)
To: u-boot
> 2011/11/18 Lv Terry-R65388 <r65388@freescale.com>:
> > Hi Jason,
> >
> > What about using
> >
> > #ifdef GPIO4_BASE_ADDR
> > [3] = GPIO4_BASE_ADDR,
> > #endif
>
> [...]
>
> > Then we can avoid adding SOC compile options in future.
>
> Terry, please don't top-post. As for your comments, I don't think so,
> first, we should not simply use GPIOx_BASE_ADDR, and second,
> it will introduce a lot of other platforms changes.
>
> Jason Liu
So it's Jason Liu or Jason Hui ?! What the heck is your name ?
M
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support
2011-11-18 10:18 ` Marek Vasut
@ 2011-11-18 12:26 ` Jason Hui
2011-11-18 20:01 ` Mike Frysinger
0 siblings, 1 reply; 20+ messages in thread
From: Jason Hui @ 2011-11-18 12:26 UTC (permalink / raw)
To: u-boot
On Fri, Nov 18, 2011 at 6:18 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
>> 2011/11/18 Lv Terry-R65388 <r65388@freescale.com>:
>> > Hi Jason,
>> >
>> > ? ? ? ?What about using
>> >
>> > #ifdef GPIO4_BASE_ADDR
>> > ? ? ? ?[3] = GPIO4_BASE_ADDR,
>> > #endif
>>
>> [...]
>>
>> > ? ? ? ?Then we can avoid adding SOC compile options in future.
>>
>> Terry, please don't top-post. As for your comments, I don't think so,
>> first, we should not simply use GPIOx_BASE_ADDR, and second,
>> it will introduce a lot of other platforms changes.
>>
>> Jason Liu
>
> So it's Jason Liu or Jason Hui ?! What the heck is your name ?
There is some mistake when linaro assign me the email address.
in fact, it should be jason.liu at linaro.org. But anyway, I don't care
about it. Sorry to make you confuse. ;)
Jason
>
> M
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support
2011-11-18 7:11 ` [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support Jason Liu
[not found] ` <2EDAD32A5B0B85468ED77279EBEE99682586FB@039-SN1MPN1-001.039d.mgd.msft.net>
@ 2011-11-18 20:00 ` Mike Frysinger
1 sibling, 0 replies; 20+ messages in thread
From: Mike Frysinger @ 2011-11-18 20:00 UTC (permalink / raw)
To: u-boot
On Friday 18 November 2011 02:11:04 Jason Liu wrote:
> -#if defined(CONFIG_MX51) || defined(CONFIG_MX53)
> +#if defined(CONFIG_MX51) || defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
> [3] = GPIO4_BASE_ADDR,
> #endif
#ifdef GPIO4_BASE_ADDR ?
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111118/7d5fc996/attachment.pgp>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support
2011-11-18 12:26 ` Jason Hui
@ 2011-11-18 20:01 ` Mike Frysinger
2011-11-18 22:59 ` Marek Vasut
0 siblings, 1 reply; 20+ messages in thread
From: Mike Frysinger @ 2011-11-18 20:01 UTC (permalink / raw)
To: u-boot
On Friday 18 November 2011 07:26:59 Jason Hui wrote:
> On Fri, Nov 18, 2011 at 6:18 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> >> 2011/11/18 Lv Terry-R65388 <r65388@freescale.com>:
> >> > Hi Jason,
> >> >
> >> > What about using
> >> >
> >> > #ifdef GPIO4_BASE_ADDR
> >> > [3] = GPIO4_BASE_ADDR,
> >> > #endif
> >>
> >> [...]
> >>
> >> > Then we can avoid adding SOC compile options in future.
> >>
> >> Terry, please don't top-post. As for your comments, I don't think so,
> >> first, we should not simply use GPIOx_BASE_ADDR, and second,
> >> it will introduce a lot of other platforms changes.
> >>
> >> Jason Liu
> >
> > So it's Jason Liu or Jason Hui ?! What the heck is your name ?
>
> There is some mistake when linaro assign me the email address.
> in fact, it should be jason.liu at linaro.org. But anyway, I don't care
> about it. Sorry to make you confuse. ;)
but the "Jason Hui" part is controlled purely on your side :). only the
"jason.hui at linaro.org" is controlled by Linaro.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111118/3a985332/attachment.pgp>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support
2011-11-18 20:01 ` Mike Frysinger
@ 2011-11-18 22:59 ` Marek Vasut
2011-11-18 23:50 ` Mike Frysinger
0 siblings, 1 reply; 20+ messages in thread
From: Marek Vasut @ 2011-11-18 22:59 UTC (permalink / raw)
To: u-boot
> On Friday 18 November 2011 07:26:59 Jason Hui wrote:
> > On Fri, Nov 18, 2011 at 6:18 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > >> 2011/11/18 Lv Terry-R65388 <r65388@freescale.com>:
> > >> > Hi Jason,
> > >> >
> > >> > What about using
> > >> >
> > >> > #ifdef GPIO4_BASE_ADDR
> > >> >
> > >> > [3] = GPIO4_BASE_ADDR,
> > >> >
> > >> > #endif
> > >>
> > >> [...]
> > >>
> > >> > Then we can avoid adding SOC compile options in future.
> > >>
> > >> Terry, please don't top-post. As for your comments, I don't think so,
> > >> first, we should not simply use GPIOx_BASE_ADDR, and second,
> > >> it will introduce a lot of other platforms changes.
> > >>
> > >> Jason Liu
> > >
> > > So it's Jason Liu or Jason Hui ?! What the heck is your name ?
> >
> > There is some mistake when linaro assign me the email address.
> > in fact, it should be jason.liu at linaro.org. But anyway, I don't care
> > about it. Sorry to make you confuse. ;)
>
> but the "Jason Hui" part is controlled purely on your side :). only the
> "jason.hui at linaro.org" is controlled by Linaro.
> -mike
Not really ... you can fake both ;-D
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support
2011-11-18 22:59 ` Marek Vasut
@ 2011-11-18 23:50 ` Mike Frysinger
0 siblings, 0 replies; 20+ messages in thread
From: Mike Frysinger @ 2011-11-18 23:50 UTC (permalink / raw)
To: u-boot
On Friday 18 November 2011 17:59:28 Marek Vasut wrote:
> > On Friday 18 November 2011 07:26:59 Jason Hui wrote:
> > > On Fri, Nov 18, 2011 at 6:18 PM, Marek Vasut wrote:
> > > >> 2011/11/18 Lv Terry-R65388 <r65388@freescale.com>:
> > > >> > Hi Jason,
> > > >> >
> > > >> > What about using
> > > >> >
> > > >> > #ifdef GPIO4_BASE_ADDR
> > > >> >
> > > >> > [3] = GPIO4_BASE_ADDR,
> > > >> >
> > > >> > #endif
> > > >>
> > > >> [...]
> > > >>
> > > >> > Then we can avoid adding SOC compile options in future.
> > > >>
> > > >> Terry, please don't top-post. As for your comments, I don't think
> > > >> so, first, we should not simply use GPIOx_BASE_ADDR, and second, it
> > > >> will introduce a lot of other platforms changes.
> > > >>
> > > >> Jason Liu
> > > >
> > > > So it's Jason Liu or Jason Hui ?! What the heck is your name ?
> > >
> > > There is some mistake when linaro assign me the email address.
> > > in fact, it should be jason.liu at linaro.org. But anyway, I don't care
> > > about it. Sorry to make you confuse. ;)
> >
> > but the "Jason Hui" part is controlled purely on your side :). only the
> > "jason.hui at linaro.org" is controlled by Linaro.
>
> Not really ... you can fake both ;-D
you can fake the From. you can't fake the To.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111118/e02abf01/attachment.pgp>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 1/6] i.mx: introduce the armv7/imx-common folder
2011-11-18 7:11 ` [U-Boot] [PATCH V2 1/6] i.mx: introduce the armv7/imx-common folder Jason Liu
@ 2011-11-21 13:40 ` Stefano Babic
0 siblings, 0 replies; 20+ messages in thread
From: Stefano Babic @ 2011-11-21 13:40 UTC (permalink / raw)
To: u-boot
On 18/11/2011 08:11, Jason Liu wrote:
> In order to support the coming MX6 platform and to reducde
> the duplicated code, we had better move some common files
> or functions to the imx-common folder for sharing.
>
> This patch does the following:
> - move speed.c file from armv7/mx5/speed.c to armv7/imx-common/speed.c
> - move armv7/mx5/timer.c to armv7/imx-common/timer.c, no any new feature
> added but just fix the checkpatch errors in the old file and remove
> the CONFIG_SYS_MX5_CLK32 reference in the file
> - create one new file cpu.c file to store the common function with i.mx5/6
>
> Signed-off-by: Jason Liu <jason.hui@linaro.org>
> Cc:Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 2/6] i.mx: add the initial support for freescale i.MX6Q processor
2011-11-18 7:11 ` [U-Boot] [PATCH V2 2/6] i.mx: add the initial support for freescale i.MX6Q processor Jason Liu
@ 2011-11-21 14:44 ` Stefano Babic
2011-11-22 13:13 ` Jason Hui
0 siblings, 1 reply; 20+ messages in thread
From: Stefano Babic @ 2011-11-21 14:44 UTC (permalink / raw)
To: u-boot
On 18/11/2011 08:11, Jason Liu wrote:
> i.MX6Q is freescale quad core processors with ARM cortex_a9 complex.
> This patch is to add the initial support for this processor.
>
> Signed-off-by: Jason Liu <jason.hui@linaro.org>
> Cc:Stefano Babic <sbabic@denx.de>
> ---
> v2:put aips init to c code as Marek suggest
> remove the parenthesis such as (2)
> remork get_usdhcx_clk() to get_usdhc_clk(port)
> remove the iomux base init and assign it staticly
> correct the chip rev print-message(rev1.0)
> ---
Hi Jason,
please understand I cannot go deep into the review due to not yet
published user manual - my comments are more related to how your code
can be integrated in current IMX code.
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/errno.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/ccm_regs.h>
> +#include <asm/arch/clock.h>
> +
> +enum pll_clocks {
> + PLL_SYS, /* System PLL */
> + PLL_BUS, /* System Bus PLL*/
> + PLL_USBOTG, /* OTG USB PLL */
> + PLL_ENET, /* ENET PLL */
> +};
> +
> +struct imx_ccm_reg *imx_ccm = (struct imx_ccm_reg *)CCM_BASE_ADDR;
Is it ok to initialize it here ? How does it work before and after
relocation ?
> +
> + return PLL3_80M / (uart_podf + 1);
> +}
> +
> +
One newline too much
> + if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
> + if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
> + root_freq = PLL2_PFD2_FREQ;
> + else
> + root_freq = PLL3_PFD1_FREQ;;
^---one is enough
Drop the redundant semicolon.
> +static u32 get_mmdc_ch0_clk(void)
> +{
> + u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
> + u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
> + MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
> +
> + return get_periph_clk() / (mmdc_ch0_podf + 1);
> +}
add a newline here
> +u32 imx_get_uartclk(void)
> +{
> + return get_uart_clk();
> +}
This is ok - but I think we should switch to mxc_get_clock(MXC_UART_CLK)
in serial_mxc.c. However, this should be done in another patch.
> +
> + printf("\n");
> + printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
> + printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
> + printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
> + printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
> + printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
> + printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
> + printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
> + printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
> + printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
> + printf("USDHC4 %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000);
> + printf("EMI SLOW %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000);
> + printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
Not yet checked, but it seems to me that some lines are too long, are'nt
they ?
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> new file mode 100644
> index 0000000..dbf8b93
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -0,0 +1,93 @@
> +/*
> + * (C) Copyright 2007
> + * Sascha Hauer, Pengutronix
> + *
> + * (C) Copyright 2009 Freescale Semiconductor, Inc.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
> +
> +u32 get_cpu_rev(void)
> +{
> + int system_rev = 0x61000 | CHIP_REV_1_0;
> +
> + return system_rev;
> +}
> +#ifdef CONFIG_ARCH_CPU_INIT
> +void init_aips(void)
> +{
> + u32 reg = AIPS1_ON_BASE_ADDR;
I know that in manual (MX51, at least) this range is called
AIPS1_ON_PLATFORM, but we used the name AIPS1_BASE_ADDR for MX51 and
MX53. Could we stick with the same name ? It is easier for everybody
starting with IMX if the registers with the same meaning.
> +
> + /*
> + * Set all MPROTx to be non-bufferable, trusted for R/W,
> + * not forced to user-mode.
> + */
> + writel(0x77777777, reg + 0x00);
> + writel(0x77777777, reg + 0x04);
> +
> + writel(0x00000000, reg + 0x40);
> + writel(0x00000000, reg + 0x44);
> + writel(0x00000000, reg + 0x48);
> + writel(0x00000000, reg + 0x4c);
> + writel(0x00000000, reg + 0x50);
I would prefer to have a structure (as described in AIPSTZ Register
Memory Map) for this instead of a raw translating of the assembly routine.
> diff --git a/arch/arm/include/asm/arch-mx6/ccm_regs.h b/arch/arm/include/asm/arch-mx6/ccm_regs.h
> new file mode 100644
> index 0000000..b55cb49
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx6/ccm_regs.h
> @@ -0,0 +1,894 @@
> +/*
> + * Freescale ANADIG Register Definitions
^---
ANADIG: this is new. What is ?
> diff --git a/arch/arm/include/asm/arch-mx6/gpio.h b/arch/arm/include/asm/arch-mx6/gpio.h
> new file mode 100644
> index 0000000..20c4e57
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx6/gpio.h
> @@ -0,0 +1,35 @@
> +/*
> + * Copyright (C) 2011
> + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +
> +#ifndef __ASM_ARCH_MX6_GPIO_H
> +#define __ASM_ARCH_MX6_GPIO_H
> +
> +/* GPIO registers */
> +struct gpio_regs {
> + u32 gpio_dr;
> + u32 gpio_dir;
> + u32 gpio_psr;
> +};
> +
> +#endif /* __ASM_ARCH_MX6_GPIO_H */
What about the proposal to have a common include path ?
> +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
> @@ -0,0 +1,1683 @@
> +/*
> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> +
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> +
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + *
> + * Auto Generate file, please don't edit it
> + *
> + */
> +
> +#ifndef __ASM_ARCH_MX6_MX6X_PINS_H__
> +#define __ASM_ARCH_MX6_MX6X_PINS_H__
> +
> +#include <asm/arch/iomux-v3.h>
> +
> +/* Use to set PAD control */
> +#define PAD_CTL_HYS (1 << 16)
> +#define PAD_CTL_PUS_100K_DOWN (0 << 14)
> +#define PAD_CTL_PUS_47K_UP (1 << 14)
> +#define PAD_CTL_PUS_100K_UP (2 << 14)
> +#define PAD_CTL_PUS_22K_UP (3 << 14)
> +
> +#define PAD_CTL_PUE (1 << 13)
> +#define PAD_CTL_PKE (1 << 12)
> +#define PAD_CTL_ODE (1 << 11)
> +#define PAD_CTL_SPEED_LOW (1 << 6)
> +#define PAD_CTL_SPEED_MED (2 << 6)
> +#define PAD_CTL_SPEED_HIGH (3 << 6)
> +#define PAD_CTL_DSE_DISABLE (0 << 3)
> +#define PAD_CTL_DSE_240ohm (1 << 3)
> +#define PAD_CTL_DSE_120ohm (2 << 3)
> +#define PAD_CTL_DSE_80ohm (3 << 3)
> +#define PAD_CTL_DSE_60ohm (4 << 3)
> +#define PAD_CTL_DSE_48ohm (5 << 3)
> +#define PAD_CTL_DSE_40ohm (6 << 3)
> +#define PAD_CTL_DSE_34ohm (7 << 3)
> +#define PAD_CTL_SRE_FAST (1 << 0)
> +#define PAD_CTL_SRE_SLOW (0 << 0)
> +
> +#define NO_MUX_I 0x3FF
> +#define NO_PAD_I 0x7FF
> +
> +enum {
> + MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
> + MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),
Only to remark. These lines will be marked with WARNING by checkpatch,
but it is surely more readable as it is in the patch as if each line
will be split. I have already merged the MX28 iomux, and even in that
case the single lines were longer as 80 bytes. If nobody complains, I
will merge the pin definition as it is.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 4/6] i.mx: serial_mxc: add the i.mx6q support
2011-11-18 7:11 ` [U-Boot] [PATCH V2 4/6] i.mx: serial_mxc: " Jason Liu
@ 2011-11-21 14:51 ` Stefano Babic
2011-11-22 13:15 ` Jason Hui
0 siblings, 1 reply; 20+ messages in thread
From: Stefano Babic @ 2011-11-21 14:51 UTC (permalink / raw)
To: u-boot
On 18/11/2011 08:11, Jason Liu wrote:
> Signed-off-by: Jason Liu <jason.hui@linaro.org>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
> v2: Cc Stefano
> ---
> drivers/serial/serial_mxc.c | 10 +++++++---
> 1 files changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
> index dcb4bd1..7d0f288 100644
> --- a/drivers/serial/serial_mxc.c
> +++ b/drivers/serial/serial_mxc.c
> @@ -47,14 +47,18 @@
> #elif defined(CONFIG_SYS_MX27_UART6)
> #define UART_PHYS 0x1001c000
> #elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \
> - defined(CONFIG_SYS_MX53_UART1)
> + defined(CONFIG_SYS_MX53_UART1) || defined(CONFIG_MX6Q_UART1)
> #define UART_PHYS UART1_BASE_ADDR
> #elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \
> - defined(CONFIG_SYS_MX53_UART2)
> + defined(CONFIG_SYS_MX53_UART2) || defined(CONFIG_MX6Q_UART2)
> #define UART_PHYS UART2_BASE_ADDR
> #elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \
> - defined(CONFIG_SYS_MX53_UART3)
> + defined(CONFIG_SYS_MX53_UART3) || defined(CONFIG_MX6Q_UART3)
> #define UART_PHYS UART3_BASE_ADDR
> +#elif defined(CONFIG_MX6Q_UART4)
> +#define UART_PHYS UART4_BASE_ADDR
> +#elif defined(CONFIG_MX6Q_UART5)
> +#define UART_PHYS UART5_BASE_ADDR
> #else
> #error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver"
> #endif
This is not a comment of your patch, but I cannot avoid to note how much
crap in this file. And we have not yet added all possible values for
each SOC, only the values necessary to build the actual boards.
The worst thing is that we do not need all this stuff. We set a lot of
#ifdef only to set the UART base address, and we really ignore (because
unneeded) the CONFIG_SYS_*_UART_*. It should be really better to define
the base address in the board configuration file, as we already do for
other drivers (USB with ehci base address, SD,..). Maybe with a
MXC_UART_BASE_ADDRESS, and we can get rid of all this bad stuff.
I will prepare a patch...
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 2/6] i.mx: add the initial support for freescale i.MX6Q processor
2011-11-21 14:44 ` Stefano Babic
@ 2011-11-22 13:13 ` Jason Hui
0 siblings, 0 replies; 20+ messages in thread
From: Jason Hui @ 2011-11-22 13:13 UTC (permalink / raw)
To: u-boot
On Mon, Nov 21, 2011 at 10:44 PM, Stefano Babic <sbabic@denx.de> wrote:
> On 18/11/2011 08:11, Jason Liu wrote:
>> i.MX6Q is freescale quad core processors with ARM cortex_a9 complex.
>> This patch is to add the initial support for this processor.
>>
>> Signed-off-by: Jason Liu <jason.hui@linaro.org>
>> Cc:Stefano Babic <sbabic@denx.de>
>> ---
>> v2:put aips init to c code as Marek suggest
>> ? ?remove the parenthesis such as (2)
>> ? ?remork get_usdhcx_clk() to get_usdhc_clk(port)
>> ? ?remove the iomux base init and assign it staticly
>> ? ?correct the chip rev print-message(rev1.0)
>> ---
>
> Hi Jason,
>
> please understand I cannot go deep into the review due to not yet
> published user manual - my comments are more related to how your code
> can be integrated in current IMX code.
yes, understood. Thanks for the review.
>
>> +#include <common.h>
>> +#include <asm/io.h>
>> +#include <asm/errno.h>
>> +#include <asm/arch/imx-regs.h>
>> +#include <asm/arch/ccm_regs.h>
>> +#include <asm/arch/clock.h>
>> +
>> +enum pll_clocks {
>> + ? ? PLL_SYS, ? ? ? ?/* System PLL */
>> + ? ? PLL_BUS, ? ? ? ?/* System Bus PLL*/
>> + ? ? PLL_USBOTG, ? ? /* OTG USB PLL */
>> + ? ? PLL_ENET, ? ? ? /* ENET PLL */
>> +};
>> +
>> +struct imx_ccm_reg *imx_ccm = (struct imx_ccm_reg *)CCM_BASE_ADDR;
>
> Is it ok to initialize it here ? How does it work before and after
> relocation ?
IMHO, This should be OK.
>
>> +
>> + ? ? return PLL3_80M / (uart_podf + 1);
>> +}
>> +
>> +
>
> One newline too much
yes, will remove it.
>
>> + ? ? if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
>> + ? ? ? ? ? ? if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
>> + ? ? ? ? ? ? ? ? ? ? root_freq = PLL2_PFD2_FREQ;
>> + ? ? ? ? ? ? else
>> + ? ? ? ? ? ? ? ? ? ? root_freq = PLL3_PFD1_FREQ;;
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ^---one is enough
> Drop the redundant semicolon.
yes, good eyesight.
>
>> +static u32 get_mmdc_ch0_clk(void)
>> +{
>> + ? ? u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
>> + ? ? u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
>> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
>> +
>> + ? ? return get_periph_clk() / (mmdc_ch0_podf + 1);
>> +}
>
> add a newline here
OK,
>
>> +u32 imx_get_uartclk(void)
>> +{
>> + ? ? return get_uart_clk();
>> +}
>
> This is ok - but I think we should switch to mxc_get_clock(MXC_UART_CLK)
> in serial_mxc.c. However, this should be done in another patch.
yes, will do it in another patch to do the clean up.
>
>> +
>> + ? ? printf("\n");
>> + ? ? printf("IPG ? ? ? ? ? ? %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
>> + ? ? printf("UART ? ? ? ? ? ?%8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
>> + ? ? printf("CSPI ? ? ? ? ? ?%8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
>> + ? ? printf("AHB ? ? ? ? ? ? %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
>> + ? ? printf("AXI ? ? ? ? ? ? %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
>> + ? ? printf("DDR ? ? ? ? ? ? %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
>> + ? ? printf("USDHC1 ? ? ? ? ?%8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
>> + ? ? printf("USDHC2 ? ? ? ? ?%8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
>> + ? ? printf("USDHC3 ? ? ? ? ?%8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
>> + ? ? printf("USDHC4 ? ? ? ? ?%8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000);
>> + ? ? printf("EMI SLOW ? ? ? ?%8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000);
>> + ? ? printf("IPG PERCLK ? ? ?%8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
>
> Not yet checked, but it seems to me that some lines are too long, are'nt
> they ?
Yes, too long, will fix it.
>
>> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
>> new file mode 100644
>> index 0000000..dbf8b93
>> --- /dev/null
>> +++ b/arch/arm/cpu/armv7/mx6/soc.c
>> @@ -0,0 +1,93 @@
>> +/*
>> + * (C) Copyright 2007
>> + * Sascha Hauer, Pengutronix
>> + *
>> + * (C) Copyright 2009 Freescale Semiconductor, Inc.
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/errno.h>
>> +#include <asm/io.h>
>> +#include <asm/arch/imx-regs.h>
>> +#include <asm/arch/clock.h>
>> +#include <asm/arch/sys_proto.h>
>> +
>> +u32 get_cpu_rev(void)
>> +{
>> + ? ? int system_rev = 0x61000 | CHIP_REV_1_0;
>> +
>> + ? ? return system_rev;
>> +}
>> +#ifdef CONFIG_ARCH_CPU_INIT
>> +void init_aips(void)
>> +{
>> + ? ? u32 reg = AIPS1_ON_BASE_ADDR;
>
> I know that in manual (MX51, at least) this range is called
> AIPS1_ON_PLATFORM, but we used the name AIPS1_BASE_ADDR for MX51 and
> MX53. Could we stick with the same name ? It is easier for everybody
> starting with IMX if the registers with the same meaning.
>
OK, agree.
>
>> +
>> + ? ? /*
>> + ? ? ?* Set all MPROTx to be non-bufferable, trusted for R/W,
>> + ? ? ?* not forced to user-mode.
>> + ? ? ?*/
>> + ? ? writel(0x77777777, reg + 0x00);
>> + ? ? writel(0x77777777, reg + 0x04);
>> +
>> + ? ? writel(0x00000000, reg + 0x40);
>> + ? ? writel(0x00000000, reg + 0x44);
>> + ? ? writel(0x00000000, reg + 0x48);
>> + ? ? writel(0x00000000, reg + 0x4c);
>> + ? ? writel(0x00000000, reg + 0x50);
>
> I would prefer to have a structure (as described in AIPSTZ Register
> Memory Map) for this instead of a raw translating of the assembly routine.
I double check with IC team, that we don't need do it here.
So I will remove it.
>
>> diff --git a/arch/arm/include/asm/arch-mx6/ccm_regs.h b/arch/arm/include/asm/arch-mx6/ccm_regs.h
>> new file mode 100644
>> index 0000000..b55cb49
>> --- /dev/null
>> +++ b/arch/arm/include/asm/arch-mx6/ccm_regs.h
>> @@ -0,0 +1,894 @@
>> +/*
>> + * Freescale ANADIG Register Definitions
> ? ? ? ? ? ? ? ? ?^---
>
> ANADIG: this is new. What is ?
hmm, It's the CCM register, I will change it to CCM.
>
>
>> diff --git a/arch/arm/include/asm/arch-mx6/gpio.h b/arch/arm/include/asm/arch-mx6/gpio.h
>> new file mode 100644
>> index 0000000..20c4e57
>> --- /dev/null
>> +++ b/arch/arm/include/asm/arch-mx6/gpio.h
>> @@ -0,0 +1,35 @@
>> +/*
>> + * Copyright (C) 2011
>> + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +
>> +#ifndef __ASM_ARCH_MX6_GPIO_H
>> +#define __ASM_ARCH_MX6_GPIO_H
>> +
>> +/* GPIO registers */
>> +struct gpio_regs {
>> + ? ? u32 ? ? gpio_dr;
>> + ? ? u32 ? ? gpio_dir;
>> + ? ? u32 ? ? gpio_psr;
>> +};
>> +
>> +#endif ? ? ? /* __ASM_ARCH_MX6_GPIO_H */
>
> What about the proposal to have a common include path ?
I remember that there is not must have feature. And I consider to add
another patch to do clean up for the whole i.mx5 and i.mx6. Agree?
>
>> +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
>> @@ -0,0 +1,1683 @@
>> +/*
>> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> +
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
>> + * GNU General Public License for more details.
>> +
>> + * You should have received a copy of the GNU General Public License along
>> + * with this program; if not, write to the Free Software Foundation, Inc.,
>> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
>> + *
>> + * Auto Generate file, please don't edit it
>> + *
>> + */
>> +
>> +#ifndef __ASM_ARCH_MX6_MX6X_PINS_H__
>> +#define __ASM_ARCH_MX6_MX6X_PINS_H__
>> +
>> +#include <asm/arch/iomux-v3.h>
>> +
>> +/* Use to set PAD control */
>> +#define PAD_CTL_HYS ? ? ? ? ?(1 << 16)
>> +#define PAD_CTL_PUS_100K_DOWN ? ? ? ?(0 << 14)
>> +#define PAD_CTL_PUS_47K_UP ? (1 << 14)
>> +#define PAD_CTL_PUS_100K_UP ?(2 << 14)
>> +#define PAD_CTL_PUS_22K_UP ? (3 << 14)
>> +
>> +#define PAD_CTL_PUE ? ? ? ? ?(1 << 13)
>> +#define PAD_CTL_PKE ? ? ? ? ?(1 << 12)
>> +#define PAD_CTL_ODE ? ? ? ? ?(1 << 11)
>> +#define PAD_CTL_SPEED_LOW ? ?(1 << 6)
>> +#define PAD_CTL_SPEED_MED ? ?(2 << 6)
>> +#define PAD_CTL_SPEED_HIGH ? (3 << 6)
>> +#define PAD_CTL_DSE_DISABLE ?(0 << 3)
>> +#define PAD_CTL_DSE_240ohm ? (1 << 3)
>> +#define PAD_CTL_DSE_120ohm ? (2 << 3)
>> +#define PAD_CTL_DSE_80ohm ? ?(3 << 3)
>> +#define PAD_CTL_DSE_60ohm ? ?(4 << 3)
>> +#define PAD_CTL_DSE_48ohm ? ?(5 << 3)
>> +#define PAD_CTL_DSE_40ohm ? ?(6 << 3)
>> +#define PAD_CTL_DSE_34ohm ? ?(7 << 3)
>> +#define PAD_CTL_SRE_FAST ? ? (1 << 0)
>> +#define PAD_CTL_SRE_SLOW ? ? (0 << 0)
>> +
>> +#define NO_MUX_I ? ? ? ? ? ? 0x3FF
>> +#define NO_PAD_I ? ? ? ? ? ? 0x7FF
>> +
>> +enum {
>> + ? ? MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 ? ? ? ? ?= IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
>> + ? ? MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 ? ? ? ? ? = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),
>
> Only to remark. These lines will be marked with WARNING by checkpatch,
> but it is surely more readable as it is in the patch as if each line
> will be split. I have already merged the MX28 iomux, and even in that
> case the single lines were longer as 80 bytes. If nobody complains, I
> will merge the pin definition as it is.
Yes, it's better to keep as it for more readable, linux kernel also has a lot of
such situation.
>
> Best regards,
> Stefano Babic
>
> --
> =====================================================================
> DENX Software Engineering GmbH, ? ? MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 ?Email: office at denx.de
> =====================================================================
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 4/6] i.mx: serial_mxc: add the i.mx6q support
2011-11-21 14:51 ` Stefano Babic
@ 2011-11-22 13:15 ` Jason Hui
0 siblings, 0 replies; 20+ messages in thread
From: Jason Hui @ 2011-11-22 13:15 UTC (permalink / raw)
To: u-boot
On Mon, Nov 21, 2011 at 10:51 PM, Stefano Babic <sbabic@denx.de> wrote:
> On 18/11/2011 08:11, Jason Liu wrote:
>> Signed-off-by: Jason Liu <jason.hui@linaro.org>
>> Cc: Stefano Babic <sbabic@denx.de>
>> ---
>> v2: Cc Stefano
>> ---
>> ?drivers/serial/serial_mxc.c | ? 10 +++++++---
>> ?1 files changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
>> index dcb4bd1..7d0f288 100644
>> --- a/drivers/serial/serial_mxc.c
>> +++ b/drivers/serial/serial_mxc.c
>> @@ -47,14 +47,18 @@
>> ?#elif defined(CONFIG_SYS_MX27_UART6)
>> ?#define UART_PHYS 0x1001c000
>> ?#elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \
>> - ? ? defined(CONFIG_SYS_MX53_UART1)
>> + ? ? defined(CONFIG_SYS_MX53_UART1) || defined(CONFIG_MX6Q_UART1)
>> ?#define UART_PHYS UART1_BASE_ADDR
>> ?#elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \
>> - ? ? defined(CONFIG_SYS_MX53_UART2)
>> + ? ? defined(CONFIG_SYS_MX53_UART2) || defined(CONFIG_MX6Q_UART2)
>> ?#define UART_PHYS UART2_BASE_ADDR
>> ?#elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \
>> - ? ? defined(CONFIG_SYS_MX53_UART3)
>> + ? ? defined(CONFIG_SYS_MX53_UART3) || defined(CONFIG_MX6Q_UART3)
>> ?#define UART_PHYS UART3_BASE_ADDR
>> +#elif defined(CONFIG_MX6Q_UART4)
>> +#define UART_PHYS UART4_BASE_ADDR
>> +#elif defined(CONFIG_MX6Q_UART5)
>> +#define UART_PHYS UART5_BASE_ADDR
>> ?#else
>> ?#error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver"
>> ?#endif
>
> This is not a comment of your patch, but I cannot avoid to note how much
> crap in this file. And we have not yet added all possible values for
> each SOC, only the values necessary to build the actual boards.
>
> The worst thing is that we do not need all this stuff. We set a lot of
> #ifdef only to set the UART base address, and we really ignore (because
> unneeded) the CONFIG_SYS_*_UART_*. It should be really better to define
> the base address in the board configuration file, as we already do for
> other drivers (USB with ehci base address, SD,..). Maybe with a
> MXC_UART_BASE_ADDRESS, and we can get rid of all this bad stuff.
Yes, fully agree.
>
> I will prepare a patch...
Waiting for your patch.
>
> Best regards,
> Stefano Babic
>
> --
> =====================================================================
> DENX Software Engineering GmbH, ? ? MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 ?Email: office at denx.de
> =====================================================================
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [U-Boot] [PATCH V2 5/6] i.mx: fsl_esdhc: add the i.mx6q support
2011-11-18 7:11 ` [U-Boot] [PATCH V2 5/6] i.mx: fsl_esdhc: " Jason Liu
@ 2011-11-24 16:23 ` Stefano Babic
0 siblings, 0 replies; 20+ messages in thread
From: Stefano Babic @ 2011-11-24 16:23 UTC (permalink / raw)
To: u-boot
On 18/11/2011 08:11, Jason Liu wrote:
> The mmc host controller on the i.mx6q is called usdhc which
> is redesigned based on the freescale esdhc controller.
>
> The usdhc controller is almost compatible with esdhc except
> it adds one mix register to support debug/SD3.0 and move
> the low bit 0-6 of XFERTYP register to the mix control reg
> low bit 0-6. Thus on i.mx6q, we have the following compared
> with the previous soc: (can refer to RM of chapter 56.3.3)
>
> i.mx6q:
> mix control:
> bit 31 - bit 7: Added for debug/SD3.0 support
> bit 6 - bit 0: move in the XFERTYP register bit 6-0 on previous soc
> XFERTYP register:
> bit 31 - bit 7: the same as before,
> bit 6 - bit 0: no-use
>
> previous soc
> mix control: no
> XFERTYP register:
> bit 31 - bit 0: xfertype information
>
> Signed-off-by: Jason Liu <jason.hui@linaro.org>
> CC:Stefano Babic <sbabic@denx.de>
> Acked-by: Stefano Babic <sbabic@denx.de>
> ---
> v2: extend the commit message by adding mix/xtertype register change
> remove one #ifdef as Marek suggested
> change the print of USDHC/ESDHC to SDHC
> ---
> drivers/mmc/fsl_esdhc.c | 12 +++++++++---
> 1 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index ec953f0..ddd1b4c 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -58,7 +58,8 @@ struct fsl_esdhc {
> uint autoc12err;
> uint hostcapblt;
> uint wml;
> - char reserved1[8];
> + uint mixctrl;
> + char reserved1[4];
> uint fevt;
> char reserved2[168];
> uint hostver;
> @@ -298,8 +299,13 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
>
> /* Send the command */
> esdhc_write32(®s->cmdarg, cmd->cmdarg);
> +#if defined(CONFIG_FSL_USDHC)
> + esdhc_write32(®s->mixctrl,
> + (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F));
> + esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000);
> +#else
> esdhc_write32(®s->xfertyp, xfertyp);
> -
> +#endif
> /* Wait for the command to complete */
> while (!(esdhc_read32(®s->irqstat) & IRQSTAT_CC))
> ;
> @@ -482,7 +488,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
>
> mmc = malloc(sizeof(struct mmc));
>
> - sprintf(mmc->name, "FSL_ESDHC");
> + sprintf(mmc->name, "FSL_SDHC");
> regs = (struct fsl_esdhc *)cfg->esdhc_base;
Jason,
I have no issues about this patch, but it was not forwarded to Andy (MMC
Maintainer).
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2011-11-24 16:23 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-11-18 7:11 [U-Boot] [PATCH V2 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
2011-11-18 7:11 ` [U-Boot] [PATCH V2 1/6] i.mx: introduce the armv7/imx-common folder Jason Liu
2011-11-21 13:40 ` Stefano Babic
2011-11-18 7:11 ` [U-Boot] [PATCH V2 2/6] i.mx: add the initial support for freescale i.MX6Q processor Jason Liu
2011-11-21 14:44 ` Stefano Babic
2011-11-22 13:13 ` Jason Hui
2011-11-18 7:11 ` [U-Boot] [PATCH V2 3/6] i.mx: mxc_gpio: add the i.mx6q support Jason Liu
[not found] ` <2EDAD32A5B0B85468ED77279EBEE99682586FB@039-SN1MPN1-001.039d.mgd.msft.net>
2011-11-18 7:30 ` Jason Hui
2011-11-18 10:18 ` Marek Vasut
2011-11-18 12:26 ` Jason Hui
2011-11-18 20:01 ` Mike Frysinger
2011-11-18 22:59 ` Marek Vasut
2011-11-18 23:50 ` Mike Frysinger
2011-11-18 20:00 ` Mike Frysinger
2011-11-18 7:11 ` [U-Boot] [PATCH V2 4/6] i.mx: serial_mxc: " Jason Liu
2011-11-21 14:51 ` Stefano Babic
2011-11-22 13:15 ` Jason Hui
2011-11-18 7:11 ` [U-Boot] [PATCH V2 5/6] i.mx: fsl_esdhc: " Jason Liu
2011-11-24 16:23 ` Stefano Babic
2011-11-18 7:11 ` [U-Boot] [PATCH V2 6/6] i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board Jason Liu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.