* [V3 0/6] rtc-sa1100 clean up
@ 2011-11-30 6:34 Jett.Zhou
2011-11-30 17:45 ` Arnd Bergmann
2012-01-19 11:39 ` Russell King - ARM Linux
0 siblings, 2 replies; 11+ messages in thread
From: Jett.Zhou @ 2011-11-30 6:34 UTC (permalink / raw)
To: linux-arm-kernel
This patch set do the following things:
1) clean up sa1100-rtc for support sa1100/pxa/mmp series
2) add dummy clock for pxa arch
3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
4) fix build error for sa1100 arch
Jett.Zhou (6):
RTC: sa1100: Clean out ost register
RTC: sa1100: remove redundant code of setting alarm
RTC: sa1100: support sa1100, pxa and mmp soc families
ARM: pxa: add dummy clock for sa1100-rtc
ARM: sa1100: clean up of the clock support
ARM: sa1100: fix build error
arch/arm/Kconfig | 2 +-
arch/arm/mach-pxa/devices.c | 20 +++
arch/arm/mach-pxa/pxa25x.c | 1 +
arch/arm/mach-pxa/pxa27x.c | 1 +
arch/arm/mach-pxa/pxa300.c | 1 +
arch/arm/mach-pxa/pxa320.c | 1 +
arch/arm/mach-pxa/pxa3xx.c | 1 +
arch/arm/mach-pxa/pxa95x.c | 1 +
arch/arm/mach-sa1100/Makefile.boot | 4 +-
arch/arm/mach-sa1100/clock.c | 91 ++++++++---
arch/arm/mach-sa1100/generic.c | 20 +++
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-sa1100.c | 300 ++++++++++++++++++++++--------------
13 files changed, 299 insertions(+), 146 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
2011-11-30 6:34 [V3 0/6] rtc-sa1100 clean up Jett.Zhou
@ 2011-11-30 17:45 ` Arnd Bergmann
2011-12-01 4:54 ` Jett Zhou
2011-12-08 2:27 ` Haojian Zhuang
2012-01-19 11:39 ` Russell King - ARM Linux
1 sibling, 2 replies; 11+ messages in thread
From: Arnd Bergmann @ 2011-11-30 17:45 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 30 November 2011, Jett.Zhou wrote:
> This patch set do the following things:
> 1) clean up sa1100-rtc for support sa1100/pxa/mmp series
> 2) add dummy clock for pxa arch
> 3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
> 4) fix build error for sa1100 arch
>
> Jett.Zhou (6):
> RTC: sa1100: Clean out ost register
> RTC: sa1100: remove redundant code of setting alarm
> RTC: sa1100: support sa1100, pxa and mmp soc families
> ARM: pxa: add dummy clock for sa1100-rtc
> ARM: sa1100: clean up of the clock support
> ARM: sa1100: fix build error
Looks good to me, but a small note on the submission:
Please always use the --thread option to git-send-email
(with --no-chain-reply). I think this is now the default
for recent versions, and it makes it easier to see which
patches belong together.
The build fix should be submitted separately so it can
go into 3.2, while the rest ends up in 3.3.
Arnd
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
2011-11-30 17:45 ` Arnd Bergmann
@ 2011-12-01 4:54 ` Jett Zhou
2011-12-08 2:27 ` Haojian Zhuang
1 sibling, 0 replies; 11+ messages in thread
From: Jett Zhou @ 2011-12-01 4:54 UTC (permalink / raw)
To: linux-arm-kernel
Arnd
Thanks for your reminder. I will pay attention to it later.
Best Regards
Jett
-----Original Message-----
From: Arnd Bergmann [mailto:arnd at arndb.de]
Sent: Thursday, December 01, 2011 1:45 AM
To: linux-arm-kernel at lists.infradead.org
Cc: Jett Zhou; robert.jarzmik at free.fr; a.zummo at towertech.it; haojian.zhuang at gmail.com; plagnioj at jcrosoft.com; rtc-linux at googlegroups.com
Subject: Re: [V3 0/6] rtc-sa1100 clean up
On Wednesday 30 November 2011, Jett.Zhou wrote:
> This patch set do the following things:
> 1) clean up sa1100-rtc for support sa1100/pxa/mmp series
> 2) add dummy clock for pxa arch
> 3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
> 4) fix build error for sa1100 arch
>
> Jett.Zhou (6):
> RTC: sa1100: Clean out ost register
> RTC: sa1100: remove redundant code of setting alarm
> RTC: sa1100: support sa1100, pxa and mmp soc families
> ARM: pxa: add dummy clock for sa1100-rtc
> ARM: sa1100: clean up of the clock support
> ARM: sa1100: fix build error
Looks good to me, but a small note on the submission:
Please always use the --thread option to git-send-email
(with --no-chain-reply). I think this is now the default
for recent versions, and it makes it easier to see which
patches belong together.
The build fix should be submitted separately so it can
go into 3.2, while the rest ends up in 3.3.
Arnd
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
2011-11-30 17:45 ` Arnd Bergmann
2011-12-01 4:54 ` Jett Zhou
@ 2011-12-08 2:27 ` Haojian Zhuang
1 sibling, 0 replies; 11+ messages in thread
From: Haojian Zhuang @ 2011-12-08 2:27 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 1, 2011 at 1:45 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Wednesday 30 November 2011, Jett.Zhou wrote:
>> This patch set do the following things:
>> ? 1) clean up sa1100-rtc for support sa1100/pxa/mmp series
>> ? 2) add dummy clock for pxa arch
>> ? 3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
>> ? 4) fix build error for sa1100 arch
>>
>> Jett.Zhou (6):
>> ? RTC: sa1100: Clean out ost register
>> ? RTC: sa1100: remove redundant code of setting alarm
>> ? RTC: sa1100: support sa1100, pxa and mmp soc families
>> ? ARM: pxa: add dummy clock for sa1100-rtc
>> ? ARM: sa1100: clean up of the clock support
>> ? ARM: sa1100: fix build error
>
> Looks good to me, but a small note on the submission:
>
> Please always use the --thread option to git-send-email
> (with --no-chain-reply). I think this is now the default
> for recent versions, and it makes it easier to see which
> patches belong together.
>
> The build fix should be submitted separately so it can
> go into 3.2, while the rest ends up in 3.3.
>
> ? ? ? ?Arnd
Applied
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
2011-11-30 6:34 [V3 0/6] rtc-sa1100 clean up Jett.Zhou
2011-11-30 17:45 ` Arnd Bergmann
@ 2012-01-19 11:39 ` Russell King - ARM Linux
2012-01-19 11:46 ` Russell King - ARM Linux
1 sibling, 1 reply; 11+ messages in thread
From: Russell King - ARM Linux @ 2012-01-19 11:39 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 30, 2011 at 02:34:03PM +0800, Jett.Zhou wrote:
> This patch set do the following things:
> 1) clean up sa1100-rtc for support sa1100/pxa/mmp series
> 2) add dummy clock for pxa arch
> 3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
> 4) fix build error for sa1100 arch
Guys,
If you're modifying a driver which is shared across different architectures
please try to build it for those different architectures. It helps to
avoid receiving reports like the below:
drivers/rtc/rtc-sa1100.c:42:1: warning: "RCNR" redefined
In file included from arch/arm/mach-sa1100/include/mach/hardware.h:73,
from drivers/rtc/rtc-sa1100.c:35:
arch/arm/mach-sa1100/include/mach/SA-1100.h:877:1: warning: this is the location of the previous definition
drivers/rtc/rtc-sa1100.c:43:1: warning: "RTAR" redefined
arch/arm/mach-sa1100/include/mach/SA-1100.h:876:1: warning: this is the location of the previous definition
drivers/rtc/rtc-sa1100.c:44:1: warning: "RTSR" redefined
arch/arm/mach-sa1100/include/mach/SA-1100.h:879:1: warning: this is the location of the previous definition
drivers/rtc/rtc-sa1100.c:45:1: warning: "RTTR" redefined
arch/arm/mach-sa1100/include/mach/SA-1100.h:878:1: warning: this is the location of the previous definition
drivers/rtc/rtc-sa1100.c:47:1: warning: "RTSR_HZE" redefined
arch/arm/mach-sa1100/include/mach/SA-1100.h:891:1: warning: this is the location of the previous definition
drivers/rtc/rtc-sa1100.c:48:1: warning: "RTSR_ALE" redefined
arch/arm/mach-sa1100/include/mach/SA-1100.h:890:1: warning: this is the location of the previous definition
drivers/rtc/rtc-sa1100.c:49:1: warning: "RTSR_HZ" redefined
arch/arm/mach-sa1100/include/mach/SA-1100.h:889:1: warning: this is the location of the previous definition
drivers/rtc/rtc-sa1100.c:50:1: warning: "RTSR_AL" redefined
arch/arm/mach-sa1100/include/mach/SA-1100.h:888:1: warning: this is the location of the previous definition
Please fix it.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
2012-01-19 11:39 ` Russell King - ARM Linux
@ 2012-01-19 11:46 ` Russell King - ARM Linux
2012-01-19 12:03 ` Russell King - ARM Linux
0 siblings, 1 reply; 11+ messages in thread
From: Russell King - ARM Linux @ 2012-01-19 11:46 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 19, 2012 at 11:39:40AM +0000, Russell King - ARM Linux wrote:
> On Wed, Nov 30, 2011 at 02:34:03PM +0800, Jett.Zhou wrote:
> > This patch set do the following things:
> > 1) clean up sa1100-rtc for support sa1100/pxa/mmp series
> > 2) add dummy clock for pxa arch
> > 3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
> > 4) fix build error for sa1100 arch
>
> Guys,
>
> If you're modifying a driver which is shared across different architectures
> please try to build it for those different architectures. It helps to
> avoid receiving reports like the below:
>
> drivers/rtc/rtc-sa1100.c:42:1: warning: "RCNR" redefined
> In file included from arch/arm/mach-sa1100/include/mach/hardware.h:73,
> from drivers/rtc/rtc-sa1100.c:35:
> arch/arm/mach-sa1100/include/mach/SA-1100.h:877:1: warning: this is the location of the previous definition
> drivers/rtc/rtc-sa1100.c:43:1: warning: "RTAR" redefined
> arch/arm/mach-sa1100/include/mach/SA-1100.h:876:1: warning: this is the location of the previous definition
> drivers/rtc/rtc-sa1100.c:44:1: warning: "RTSR" redefined
> arch/arm/mach-sa1100/include/mach/SA-1100.h:879:1: warning: this is the location of the previous definition
> drivers/rtc/rtc-sa1100.c:45:1: warning: "RTTR" redefined
> arch/arm/mach-sa1100/include/mach/SA-1100.h:878:1: warning: this is the location of the previous definition
> drivers/rtc/rtc-sa1100.c:47:1: warning: "RTSR_HZE" redefined
> arch/arm/mach-sa1100/include/mach/SA-1100.h:891:1: warning: this is the location of the previous definition
> drivers/rtc/rtc-sa1100.c:48:1: warning: "RTSR_ALE" redefined
> arch/arm/mach-sa1100/include/mach/SA-1100.h:890:1: warning: this is the location of the previous definition
> drivers/rtc/rtc-sa1100.c:49:1: warning: "RTSR_HZ" redefined
> arch/arm/mach-sa1100/include/mach/SA-1100.h:889:1: warning: this is the location of the previous definition
> drivers/rtc/rtc-sa1100.c:50:1: warning: "RTSR_AL" redefined
> arch/arm/mach-sa1100/include/mach/SA-1100.h:888:1: warning: this is the location of the previous definition
>
> Please fix it.
And what's more, it doesn't even work on sa1100 anymore. So it's regressed
during this merge window.
Ok, this is a total bollocks change - what was added to this file
was:
#define RCNR 0x00 /* RTC Count Register */
#define RTAR 0x04 /* RTC Alarm Register */
#define RTSR 0x08 /* RTC Status Register */
#define RTTR 0x0c /* RTC Timer Trim Register */
and the SA11x0 definitions are different:
#define RTAR __REG(0x90010000) /* RTC Alarm Reg. */
#define RCNR __REG(0x90010004) /* RTC CouNt Reg. */
#define RTTR __REG(0x90010008) /* RTC Trim Reg. */
#define RTSR __REG(0x90010010) /* RTC Status Reg. */
Notice the different register positioning in the address space.
Therefore, this driver restructuring is fatally wrong. I'm going to
revert this entire series in my tree so SA11x0 continues to work here,
whether I send that to Linus depends on how quickly a fix can be
produced, and whether Alessandro agrees.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
2012-01-19 11:46 ` Russell King - ARM Linux
@ 2012-01-19 12:03 ` Russell King - ARM Linux
0 siblings, 0 replies; 11+ messages in thread
From: Russell King - ARM Linux @ 2012-01-19 12:03 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 19, 2012 at 11:46:27AM +0000, Russell King - ARM Linux wrote:
> On Thu, Jan 19, 2012 at 11:39:40AM +0000, Russell King - ARM Linux wrote:
> > On Wed, Nov 30, 2011 at 02:34:03PM +0800, Jett.Zhou wrote:
> > > This patch set do the following things:
> > > 1) clean up sa1100-rtc for support sa1100/pxa/mmp series
> > > 2) add dummy clock for pxa arch
> > > 3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
> > > 4) fix build error for sa1100 arch
> >
> > Guys,
> >
> > If you're modifying a driver which is shared across different architectures
> > please try to build it for those different architectures. It helps to
> > avoid receiving reports like the below:
> >
> > drivers/rtc/rtc-sa1100.c:42:1: warning: "RCNR" redefined
> > In file included from arch/arm/mach-sa1100/include/mach/hardware.h:73,
> > from drivers/rtc/rtc-sa1100.c:35:
> > arch/arm/mach-sa1100/include/mach/SA-1100.h:877:1: warning: this is the location of the previous definition
> > drivers/rtc/rtc-sa1100.c:43:1: warning: "RTAR" redefined
> > arch/arm/mach-sa1100/include/mach/SA-1100.h:876:1: warning: this is the location of the previous definition
> > drivers/rtc/rtc-sa1100.c:44:1: warning: "RTSR" redefined
> > arch/arm/mach-sa1100/include/mach/SA-1100.h:879:1: warning: this is the location of the previous definition
> > drivers/rtc/rtc-sa1100.c:45:1: warning: "RTTR" redefined
> > arch/arm/mach-sa1100/include/mach/SA-1100.h:878:1: warning: this is the location of the previous definition
> > drivers/rtc/rtc-sa1100.c:47:1: warning: "RTSR_HZE" redefined
> > arch/arm/mach-sa1100/include/mach/SA-1100.h:891:1: warning: this is the location of the previous definition
> > drivers/rtc/rtc-sa1100.c:48:1: warning: "RTSR_ALE" redefined
> > arch/arm/mach-sa1100/include/mach/SA-1100.h:890:1: warning: this is the location of the previous definition
> > drivers/rtc/rtc-sa1100.c:49:1: warning: "RTSR_HZ" redefined
> > arch/arm/mach-sa1100/include/mach/SA-1100.h:889:1: warning: this is the location of the previous definition
> > drivers/rtc/rtc-sa1100.c:50:1: warning: "RTSR_AL" redefined
> > arch/arm/mach-sa1100/include/mach/SA-1100.h:888:1: warning: this is the location of the previous definition
> >
> > Please fix it.
>
> And what's more, it doesn't even work on sa1100 anymore. So it's regressed
> during this merge window.
>
> Ok, this is a total bollocks change - what was added to this file
> was:
>
> #define RCNR 0x00 /* RTC Count Register */
> #define RTAR 0x04 /* RTC Alarm Register */
> #define RTSR 0x08 /* RTC Status Register */
> #define RTTR 0x0c /* RTC Timer Trim Register */
>
> and the SA11x0 definitions are different:
>
> #define RTAR __REG(0x90010000) /* RTC Alarm Reg. */
> #define RCNR __REG(0x90010004) /* RTC CouNt Reg. */
> #define RTTR __REG(0x90010008) /* RTC Trim Reg. */
> #define RTSR __REG(0x90010010) /* RTC Status Reg. */
>
> Notice the different register positioning in the address space.
>
> Therefore, this driver restructuring is fatally wrong. I'm going to
> revert this entire series in my tree so SA11x0 continues to work here,
> whether I send that to Linus depends on how quickly a fix can be
> produced, and whether Alessandro agrees.
Moreover, the previous cleanup patch ("RTC: sa1100: remove redundant
code of setting alarm") wasn't tested without the other patches:
drivers/rtc/rtc-sa1100.c: In function 'sa1100_rtc_set_alarm':
drivers/rtc/rtc-sa1100.c:208: error: 'now' undeclared (first use in this function)
drivers/rtc/rtc-sa1100.c:208: error: (Each undeclared identifier is reported only once
drivers/rtc/rtc-sa1100.c:208: error: for each function it appears in.)
drivers/rtc/rtc-sa1100.c:210: error: incompatible type for argument 3 of 'rtc_next_alarm_time'
drivers/rtc/rtc-sa1100.c:211: error: 'time' undeclared (first use in this function)
so I've had to revert what should've been an independent change as well.
All these reverts are now sitting in my 'fixes' branch, and they are
the minimal set to restore the driver to a working state.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
2011-11-30 4:56 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2011-11-30 6:37 ` Jett Zhou
0 siblings, 0 replies; 11+ messages in thread
From: Jett Zhou @ 2011-11-30 6:37 UTC (permalink / raw)
To: linux-arm-kernel
Hi Jean
Sorry, I made a mistake on your email address, I sent again.
Best Regards
Jett
-----Original Message-----
From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj at jcrosoft.com]
Sent: Wednesday, November 30, 2011 12:56 PM
To: Jett Zhou
Cc: obert.jarzmik at free.fr; a.zummo at towertech.it; haojian.zhuang at gmail.com; linux-arm-kernel at lists.infradead.org; rtc-linux at googlegroups.com; plagnioj at jcrosoft.come
Subject: Re: [V3 0/6] rtc-sa1100 clean up
I did not receive you patch
can you check please
Best Regards,
J.
On 12:26 Wed 30 Nov , Jett.Zhou wrote:
> This patch set do the following things:
> 1) clean up sa1100-rtc for support sa1100/pxa/mmp series
> 2) add dummy clock for pxa arch
> 3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
> 4) fix build error for sa1100 arch
>
> Jett.Zhou (6):
> RTC: sa1100: Clean out ost register
> RTC: sa1100: remove redundant code of setting alarm
> RTC: sa1100: support sa1100, pxa and mmp soc families
> ARM: pxa: add dummy clock for sa1100-rtc
> ARM: sa1100: clean up of the clock support
> ARM: sa1100: fix build error
>
> arch/arm/Kconfig | 2 +-
> arch/arm/mach-pxa/devices.c | 20 +++
> arch/arm/mach-pxa/pxa25x.c | 1 +
> arch/arm/mach-pxa/pxa27x.c | 1 +
> arch/arm/mach-pxa/pxa300.c | 1 +
> arch/arm/mach-pxa/pxa320.c | 1 +
> arch/arm/mach-pxa/pxa3xx.c | 1 +
> arch/arm/mach-pxa/pxa95x.c | 1 +
> arch/arm/mach-sa1100/Makefile.boot | 4 +-
> arch/arm/mach-sa1100/clock.c | 91 ++++++++---
> arch/arm/mach-sa1100/generic.c | 20 +++
> drivers/rtc/Kconfig | 2 +-
> drivers/rtc/rtc-sa1100.c | 300 ++++++++++++++++++++++--------------
> 13 files changed, 299 insertions(+), 146 deletions(-)
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
@ 2011-11-30 6:26 Jett.Zhou
0 siblings, 0 replies; 11+ messages in thread
From: Jett.Zhou @ 2011-11-30 6:26 UTC (permalink / raw)
To: linux-arm-kernel
This patch set do the following things:
1) clean up sa1100-rtc for support sa1100/pxa/mmp series
2) add dummy clock for pxa arch
3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
4) fix build error for sa1100 arch
Jett.Zhou (6):
RTC: sa1100: Clean out ost register
RTC: sa1100: remove redundant code of setting alarm
RTC: sa1100: support sa1100, pxa and mmp soc families
ARM: pxa: add dummy clock for sa1100-rtc
ARM: sa1100: clean up of the clock support
ARM: sa1100: fix build error
arch/arm/Kconfig | 2 +-
arch/arm/mach-pxa/devices.c | 20 +++
arch/arm/mach-pxa/pxa25x.c | 1 +
arch/arm/mach-pxa/pxa27x.c | 1 +
arch/arm/mach-pxa/pxa300.c | 1 +
arch/arm/mach-pxa/pxa320.c | 1 +
arch/arm/mach-pxa/pxa3xx.c | 1 +
arch/arm/mach-pxa/pxa95x.c | 1 +
arch/arm/mach-sa1100/Makefile.boot | 4 +-
arch/arm/mach-sa1100/clock.c | 91 ++++++++---
arch/arm/mach-sa1100/generic.c | 20 +++
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-sa1100.c | 300 ++++++++++++++++++++++--------------
13 files changed, 299 insertions(+), 146 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
2011-11-30 4:26 Jett.Zhou
@ 2011-11-30 4:56 ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-30 6:37 ` Jett Zhou
0 siblings, 1 reply; 11+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2011-11-30 4:56 UTC (permalink / raw)
To: linux-arm-kernel
I did not receive you patch
can you check please
Best Regards,
J.
On 12:26 Wed 30 Nov , Jett.Zhou wrote:
> This patch set do the following things:
> 1) clean up sa1100-rtc for support sa1100/pxa/mmp series
> 2) add dummy clock for pxa arch
> 3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
> 4) fix build error for sa1100 arch
>
> Jett.Zhou (6):
> RTC: sa1100: Clean out ost register
> RTC: sa1100: remove redundant code of setting alarm
> RTC: sa1100: support sa1100, pxa and mmp soc families
> ARM: pxa: add dummy clock for sa1100-rtc
> ARM: sa1100: clean up of the clock support
> ARM: sa1100: fix build error
>
> arch/arm/Kconfig | 2 +-
> arch/arm/mach-pxa/devices.c | 20 +++
> arch/arm/mach-pxa/pxa25x.c | 1 +
> arch/arm/mach-pxa/pxa27x.c | 1 +
> arch/arm/mach-pxa/pxa300.c | 1 +
> arch/arm/mach-pxa/pxa320.c | 1 +
> arch/arm/mach-pxa/pxa3xx.c | 1 +
> arch/arm/mach-pxa/pxa95x.c | 1 +
> arch/arm/mach-sa1100/Makefile.boot | 4 +-
> arch/arm/mach-sa1100/clock.c | 91 ++++++++---
> arch/arm/mach-sa1100/generic.c | 20 +++
> drivers/rtc/Kconfig | 2 +-
> drivers/rtc/rtc-sa1100.c | 300 ++++++++++++++++++++++--------------
> 13 files changed, 299 insertions(+), 146 deletions(-)
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
* [V3 0/6] rtc-sa1100 clean up
@ 2011-11-30 4:26 Jett.Zhou
2011-11-30 4:56 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 11+ messages in thread
From: Jett.Zhou @ 2011-11-30 4:26 UTC (permalink / raw)
To: linux-arm-kernel
This patch set do the following things:
1) clean up sa1100-rtc for support sa1100/pxa/mmp series
2) add dummy clock for pxa arch
3) clean up clock dev for sa1100 arch and add dummy clock for sa1100
4) fix build error for sa1100 arch
Jett.Zhou (6):
RTC: sa1100: Clean out ost register
RTC: sa1100: remove redundant code of setting alarm
RTC: sa1100: support sa1100, pxa and mmp soc families
ARM: pxa: add dummy clock for sa1100-rtc
ARM: sa1100: clean up of the clock support
ARM: sa1100: fix build error
arch/arm/Kconfig | 2 +-
arch/arm/mach-pxa/devices.c | 20 +++
arch/arm/mach-pxa/pxa25x.c | 1 +
arch/arm/mach-pxa/pxa27x.c | 1 +
arch/arm/mach-pxa/pxa300.c | 1 +
arch/arm/mach-pxa/pxa320.c | 1 +
arch/arm/mach-pxa/pxa3xx.c | 1 +
arch/arm/mach-pxa/pxa95x.c | 1 +
arch/arm/mach-sa1100/Makefile.boot | 4 +-
arch/arm/mach-sa1100/clock.c | 91 ++++++++---
arch/arm/mach-sa1100/generic.c | 20 +++
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-sa1100.c | 300 ++++++++++++++++++++++--------------
13 files changed, 299 insertions(+), 146 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-01-19 12:03 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-11-30 6:34 [V3 0/6] rtc-sa1100 clean up Jett.Zhou
2011-11-30 17:45 ` Arnd Bergmann
2011-12-01 4:54 ` Jett Zhou
2011-12-08 2:27 ` Haojian Zhuang
2012-01-19 11:39 ` Russell King - ARM Linux
2012-01-19 11:46 ` Russell King - ARM Linux
2012-01-19 12:03 ` Russell King - ARM Linux
-- strict thread matches above, loose matches on Subject: below --
2011-11-30 6:26 Jett.Zhou
2011-11-30 4:26 Jett.Zhou
2011-11-30 4:56 ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-30 6:37 ` Jett Zhou
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.