[PATCH v5 0/5] Refactor common Kconfigs for easier maintenance

[PATCH v5 0/5] Refactor common Kconfigs for easier maintenance

[Dave Martin]

Common Kconfig options which depend on a long list of board- and
SoC- specific Kconfigs can be cumbersome to maintain, leading to
annoying merge conflicts (although rather trivial ones).

This series factors out the dependencies of CACHE_L2X0 and SMP so
that the knowledge about when these can be enabled is moved to the
relevant board/SoC Kconfig files instead.  New
MIGHT_HAVE_CACHE_L2X0 and HAVE_SMP options are defined to mediate
the dependencies.

This series has been substantially reworked compared with the
previous post, and is now in two parts:

  * The first two patches simply refactor the way the Kconfig
    options for CACHE_L2X0 and SMP are implemented, without
    making any other changes.

  * The final three patches apply functional changes suggested by
    the contributors to this series, to make the config
    dependencies more correct for some specific boards.


Thanks to Rob Herring, Shawn Guo and Russell King for their
contributions to this series.  Thanks also to David Brown for
pointing out the lack of a comprehensive CC list.


I have briefly build-tested on some of the affected boards, but any
further reviews or Tested-Bys would be much appreciated.


Dave Martin (5):
  ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  ARM: SMP: Refactor Kconfig to be more maintainable
  omap4: Unconditionally require l2x0 L2 cache controller support
  highbank: Unconditionally require l2x0 L2 cache controller support
  imx6q: Remove unconditional dependency on l2x0 L2 cache support

 arch/arm/Kconfig               |   26 ++++++++++++++++++++++----
 arch/arm/mach-exynos/Kconfig   |    2 ++
 arch/arm/mach-imx/Kconfig      |    2 +-
 arch/arm/mach-msm/Kconfig      |    1 +
 arch/arm/mach-omap2/Kconfig    |    2 ++
 arch/arm/mach-realview/Kconfig |    9 +++++++++
 arch/arm/mach-vexpress/Kconfig |    2 ++
 arch/arm/mm/Kconfig            |   23 ++++++++++++++++-------
 arch/arm/plat-mxc/Kconfig      |    1 +
 9 files changed, 56 insertions(+), 12 deletions(-)

-- 
1.7.4.1

[PATCH v5 0/5] Refactor common Kconfigs for easier maintenance

[Dave Martin]

Common Kconfig options which depend on a long list of board- and
SoC- specific Kconfigs can be cumbersome to maintain, leading to
annoying merge conflicts (although rather trivial ones).

This series factors out the dependencies of CACHE_L2X0 and SMP so
that the knowledge about when these can be enabled is moved to the
relevant board/SoC Kconfig files instead.  New
MIGHT_HAVE_CACHE_L2X0 and HAVE_SMP options are defined to mediate
the dependencies.

This series has been substantially reworked compared with the
previous post, and is now in two parts:

  * The first two patches simply refactor the way the Kconfig
    options for CACHE_L2X0 and SMP are implemented, without
    making any other changes.

  * The final three patches apply functional changes suggested by
    the contributors to this series, to make the config
    dependencies more correct for some specific boards.


Thanks to Rob Herring, Shawn Guo and Russell King for their
contributions to this series.  Thanks also to David Brown for
pointing out the lack of a comprehensive CC list.


I have briefly build-tested on some of the affected boards, but any
further reviews or Tested-Bys would be much appreciated.


Dave Martin (5):
  ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  ARM: SMP: Refactor Kconfig to be more maintainable
  omap4: Unconditionally require l2x0 L2 cache controller support
  highbank: Unconditionally require l2x0 L2 cache controller support
  imx6q: Remove unconditional dependency on l2x0 L2 cache support

 arch/arm/Kconfig               |   26 ++++++++++++++++++++++----
 arch/arm/mach-exynos/Kconfig   |    2 ++
 arch/arm/mach-imx/Kconfig      |    2 +-
 arch/arm/mach-msm/Kconfig      |    1 +
 arch/arm/mach-omap2/Kconfig    |    2 ++
 arch/arm/mach-realview/Kconfig |    9 +++++++++
 arch/arm/mach-vexpress/Kconfig |    2 ++
 arch/arm/mm/Kconfig            |   23 ++++++++++++++++-------
 arch/arm/plat-mxc/Kconfig      |    1 +
 9 files changed, 56 insertions(+), 12 deletions(-)

-- 
1.7.4.1

[PATCH v5 0/5] Refactor common Kconfigs for easier maintenance

[Dave Martin]

Common Kconfig options which depend on a long list of board- and
SoC- specific Kconfigs can be cumbersome to maintain, leading to
annoying merge conflicts (although rather trivial ones).

This series factors out the dependencies of CACHE_L2X0 and SMP so
that the knowledge about when these can be enabled is moved to the
relevant board/SoC Kconfig files instead.  New
MIGHT_HAVE_CACHE_L2X0 and HAVE_SMP options are defined to mediate
the dependencies.

This series has been substantially reworked compared with the
previous post, and is now in two parts:

  * The first two patches simply refactor the way the Kconfig
    options for CACHE_L2X0 and SMP are implemented, without
    making any other changes.

  * The final three patches apply functional changes suggested by
    the contributors to this series, to make the config
    dependencies more correct for some specific boards.


Thanks to Rob Herring, Shawn Guo and Russell King for their
contributions to this series.  Thanks also to David Brown for
pointing out the lack of a comprehensive CC list.


I have briefly build-tested on some of the affected boards, but any
further reviews or Tested-Bys would be much appreciated.


Dave Martin (5):
  ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  ARM: SMP: Refactor Kconfig to be more maintainable
  omap4: Unconditionally require l2x0 L2 cache controller support
  highbank: Unconditionally require l2x0 L2 cache controller support
  imx6q: Remove unconditional dependency on l2x0 L2 cache support

 arch/arm/Kconfig               |   26 ++++++++++++++++++++++----
 arch/arm/mach-exynos/Kconfig   |    2 ++
 arch/arm/mach-imx/Kconfig      |    2 +-
 arch/arm/mach-msm/Kconfig      |    1 +
 arch/arm/mach-omap2/Kconfig    |    2 ++
 arch/arm/mach-realview/Kconfig |    9 +++++++++
 arch/arm/mach-vexpress/Kconfig |    2 ++
 arch/arm/mm/Kconfig            |   23 ++++++++++++++++-------
 arch/arm/plat-mxc/Kconfig      |    1 +
 9 files changed, 56 insertions(+), 12 deletions(-)

-- 
1.7.4.1

[PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

[Dave Martin]

Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
is bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms have a L2x0 or
PL310 cache controller to the individual machines.  To enable this,
a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
machines to indicate that they may have such a cache controller
independently of each other.

Boards/SoCs which cannot reliably operate without the L2 cache
controller support will need to select CACHE_L2X0 directly from
their own Kconfigs instead.  This applies to some TrustZone-enabled
boards where Linux runs in the Normal World, for example.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
        (for cns3xxx)
Acked-by: Tony Lindgren <tony@atomide.com>
        (for omap)
---
Changes:

v5: Minor change to the Kconfig help text to make it more
    informative.


 arch/arm/Kconfig               |    8 ++++++++
 arch/arm/mach-exynos/Kconfig   |    1 +
 arch/arm/mach-omap2/Kconfig    |    1 +
 arch/arm/mach-realview/Kconfig |    5 +++++
 arch/arm/mach-vexpress/Kconfig |    1 +
 arch/arm/mm/Kconfig            |   23 ++++++++++++++++-------
 arch/arm/plat-mxc/Kconfig      |    1 +
 7 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44789ef..16a4b9e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,6 +344,7 @@ config ARCH_HIGHBANK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
@@ -361,6 +362,7 @@ config ARCH_CNS3XXX
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
@@ -381,6 +383,7 @@ config ARCH_PRIMA2
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -633,6 +636,7 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -703,6 +707,7 @@ config ARCH_SHMOBILE
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
@@ -904,6 +909,7 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -914,6 +920,7 @@ config ARCH_NOMADIK
 	select CPU_ARM926T
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
@@ -973,6 +980,7 @@ config ARCH_ZYNQ
 	select ARM_GIC
 	select ARM_AMBA
 	select ICST
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f..7f2347b 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5034147..c841578 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -44,6 +44,7 @@ config ARCH_OMAP4
 	select CPU_V7
 	select ARM_GIC
 	select LOCAL_TIMERS if SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select ARM_ERRATA_720789
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dba6d0c..3dd620f 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the Cortex-A9MPCore tile fitted to the
 	  Realview(R) Emulation Baseboard platform.
@@ -21,6 +22,7 @@ config REALVIEW_EB_ARM11MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
 	  Emulation Baseboard platform.
@@ -39,6 +41,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6K
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
@@ -51,6 +54,7 @@ config MACH_REALVIEW_PB1176
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_TCM
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
@@ -78,6 +82,7 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9311484..a8aefc8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,5 +8,6 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_753970
+	select MIGHT_HAVE_CACHE_L2X0
 
 endmenu
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0..acb1c36 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -816,14 +816,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
 
+config MIGHT_HAVE_CACHE_L2X0
+	bool
+	help
+	  This option should be selected by machines which have a L2x0
+	  or PL310 cache controller, but where its use is optional.
+
+	  The only effect of this option is to make CACHE_L2X0 and
+	  related options available to the user for configuration.
+
+	  Boards or SoCs which always require the cache controller
+	  support to be present should select CACHE_L2X0 directly
+	  instead of this option, thus preventing the user from
+	  inadvertently configuring a broken kernel.
+
 config CACHE_L2X0
-	bool "Enable the L2x0 outer cache controller"
-	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
-		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
-		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
-	default y
+	bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
+	default MIGHT_HAVE_CACHE_L2X0
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
 	help
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b3a1f2b..b30708e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
 	bool "i.MX3, i.MX6"
 	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  This enables support for systems based on the Freescale i.MX3 and i.MX6
 	  family.
-- 
1.7.4.1

[PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

[Dave Martin]

Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
is bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms have a L2x0 or
PL310 cache controller to the individual machines.  To enable this,
a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
machines to indicate that they may have such a cache controller
independently of each other.

Boards/SoCs which cannot reliably operate without the L2 cache
controller support will need to select CACHE_L2X0 directly from
their own Kconfigs instead.  This applies to some TrustZone-enabled
boards where Linux runs in the Normal World, for example.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
        (for cns3xxx)
Acked-by: Tony Lindgren <tony@atomide.com>
        (for omap)
---
Changes:

v5: Minor change to the Kconfig help text to make it more
    informative.


 arch/arm/Kconfig               |    8 ++++++++
 arch/arm/mach-exynos/Kconfig   |    1 +
 arch/arm/mach-omap2/Kconfig    |    1 +
 arch/arm/mach-realview/Kconfig |    5 +++++
 arch/arm/mach-vexpress/Kconfig |    1 +
 arch/arm/mm/Kconfig            |   23 ++++++++++++++++-------
 arch/arm/plat-mxc/Kconfig      |    1 +
 7 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44789ef..16a4b9e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,6 +344,7 @@ config ARCH_HIGHBANK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
@@ -361,6 +362,7 @@ config ARCH_CNS3XXX
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
@@ -381,6 +383,7 @@ config ARCH_PRIMA2
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -633,6 +636,7 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -703,6 +707,7 @@ config ARCH_SHMOBILE
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
@@ -904,6 +909,7 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -914,6 +920,7 @@ config ARCH_NOMADIK
 	select CPU_ARM926T
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
@@ -973,6 +980,7 @@ config ARCH_ZYNQ
 	select ARM_GIC
 	select ARM_AMBA
 	select ICST
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f..7f2347b 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5034147..c841578 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -44,6 +44,7 @@ config ARCH_OMAP4
 	select CPU_V7
 	select ARM_GIC
 	select LOCAL_TIMERS if SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select ARM_ERRATA_720789
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dba6d0c..3dd620f 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the Cortex-A9MPCore tile fitted to the
 	  Realview(R) Emulation Baseboard platform.
@@ -21,6 +22,7 @@ config REALVIEW_EB_ARM11MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
 	  Emulation Baseboard platform.
@@ -39,6 +41,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6K
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
@@ -51,6 +54,7 @@ config MACH_REALVIEW_PB1176
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_TCM
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
@@ -78,6 +82,7 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9311484..a8aefc8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,5 +8,6 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_753970
+	select MIGHT_HAVE_CACHE_L2X0
 
 endmenu
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0..acb1c36 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -816,14 +816,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
 
+config MIGHT_HAVE_CACHE_L2X0
+	bool
+	help
+	  This option should be selected by machines which have a L2x0
+	  or PL310 cache controller, but where its use is optional.
+
+	  The only effect of this option is to make CACHE_L2X0 and
+	  related options available to the user for configuration.
+
+	  Boards or SoCs which always require the cache controller
+	  support to be present should select CACHE_L2X0 directly
+	  instead of this option, thus preventing the user from
+	  inadvertently configuring a broken kernel.
+
 config CACHE_L2X0
-	bool "Enable the L2x0 outer cache controller"
-	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
-		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
-		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
-	default y
+	bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
+	default MIGHT_HAVE_CACHE_L2X0
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
 	help
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b3a1f2b..b30708e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
 	bool "i.MX3, i.MX6"
 	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  This enables support for systems based on the Freescale i.MX3 and i.MX6
 	  family.
-- 
1.7.4.1

[PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

[Dave Martin]

Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
is bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms have a L2x0 or
PL310 cache controller to the individual machines.  To enable this,
a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
machines to indicate that they may have such a cache controller
independently of each other.

Boards/SoCs which cannot reliably operate without the L2 cache
controller support will need to select CACHE_L2X0 directly from
their own Kconfigs instead.  This applies to some TrustZone-enabled
boards where Linux runs in the Normal World, for example.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
        (for cns3xxx)
Acked-by: Tony Lindgren <tony@atomide.com>
        (for omap)
---
Changes:

v5: Minor change to the Kconfig help text to make it more
    informative.


 arch/arm/Kconfig               |    8 ++++++++
 arch/arm/mach-exynos/Kconfig   |    1 +
 arch/arm/mach-omap2/Kconfig    |    1 +
 arch/arm/mach-realview/Kconfig |    5 +++++
 arch/arm/mach-vexpress/Kconfig |    1 +
 arch/arm/mm/Kconfig            |   23 ++++++++++++++++-------
 arch/arm/plat-mxc/Kconfig      |    1 +
 7 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44789ef..16a4b9e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,6 +344,7 @@ config ARCH_HIGHBANK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
@@ -361,6 +362,7 @@ config ARCH_CNS3XXX
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
@@ -381,6 +383,7 @@ config ARCH_PRIMA2
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -633,6 +636,7 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -703,6 +707,7 @@ config ARCH_SHMOBILE
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
@@ -904,6 +909,7 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -914,6 +920,7 @@ config ARCH_NOMADIK
 	select CPU_ARM926T
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
@@ -973,6 +980,7 @@ config ARCH_ZYNQ
 	select ARM_GIC
 	select ARM_AMBA
 	select ICST
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f..7f2347b 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5034147..c841578 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -44,6 +44,7 @@ config ARCH_OMAP4
 	select CPU_V7
 	select ARM_GIC
 	select LOCAL_TIMERS if SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select ARM_ERRATA_720789
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dba6d0c..3dd620f 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the Cortex-A9MPCore tile fitted to the
 	  Realview(R) Emulation Baseboard platform.
@@ -21,6 +22,7 @@ config REALVIEW_EB_ARM11MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
 	  Emulation Baseboard platform.
@@ -39,6 +41,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6K
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
@@ -51,6 +54,7 @@ config MACH_REALVIEW_PB1176
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_TCM
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
@@ -78,6 +82,7 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9311484..a8aefc8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,5 +8,6 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_753970
+	select MIGHT_HAVE_CACHE_L2X0
 
 endmenu
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0..acb1c36 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -816,14 +816,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
 
+config MIGHT_HAVE_CACHE_L2X0
+	bool
+	help
+	  This option should be selected by machines which have a L2x0
+	  or PL310 cache controller, but where its use is optional.
+
+	  The only effect of this option is to make CACHE_L2X0 and
+	  related options available to the user for configuration.
+
+	  Boards or SoCs which always require the cache controller
+	  support to be present should select CACHE_L2X0 directly
+	  instead of this option, thus preventing the user from
+	  inadvertently configuring a broken kernel.
+
 config CACHE_L2X0
-	bool "Enable the L2x0 outer cache controller"
-	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
-		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
-		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
-	default y
+	bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
+	default MIGHT_HAVE_CACHE_L2X0
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
 	help
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b3a1f2b..b30708e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
 	bool "i.MX3, i.MX6"
 	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  This enables support for systems based on the Freescale i.MX3 and i.MX6
 	  family.
-- 
1.7.4.1

[PATCH v5 2/5] ARM: SMP: Refactor Kconfig to be more maintainable

[Dave Martin]

Making SMP depend on (huge list of MACH_ and ARCH_ configs) is
bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms are SMP-capable
to the individual machines.  To enable this, a new HAVE_SMP config
option is introduced to allow machines to indicate that they can
run in a SMP configuration.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
        (for nomadik, ux500)
Acked-by: Tony Lindgren <tony@atomide.com>
        (for omap)
---
Changes:

v5: Minor change to the Kconfig help text to make it more
    informative.


 arch/arm/Kconfig               |   18 ++++++++++++++----
 arch/arm/mach-exynos/Kconfig   |    1 +
 arch/arm/mach-imx/Kconfig      |    1 +
 arch/arm/mach-msm/Kconfig      |    1 +
 arch/arm/mach-omap2/Kconfig    |    1 +
 arch/arm/mach-realview/Kconfig |    4 ++++
 arch/arm/mach-vexpress/Kconfig |    1 +
 7 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 16a4b9e..eca82f9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,6 +344,7 @@ config ARCH_HIGHBANK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
@@ -636,6 +637,7 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
@@ -706,6 +708,7 @@ config ARCH_SHMOBILE
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
+	select HAVE_SMP
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
@@ -909,6 +912,7 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Support for ST-Ericsson's Ux500 architecture
@@ -1430,14 +1434,20 @@ menu "Kernel Features"
 
 source "kernel/time/Kconfig"
 
+config HAVE_SMP
+	bool
+	help
+	  This option should be selected by machines which have an SMP-
+	  capable CPU.
+
+	  The only effect of this option is to make the SMP-related
+	  options available to the user for configuration.
+
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
-	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-		 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
+	depends on HAVE_SMP
 	depends on MMU
 	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 7f2347b..e1efbca 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2..29a3d61 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -615,6 +615,7 @@ config SOC_IMX6Q
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
+	select HAVE_SMP
 	select USE_OF
 
 	help
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ebde97f..e6beaff 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -67,6 +67,7 @@ config MSM_SOC_REV_A
 	bool
 config  ARCH_MSM_SCORPIONMP
 	bool
+	select HAVE_SMP
 
 config  ARCH_MSM_ARM11
 	bool
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c841578..bb1b670 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -43,6 +43,7 @@ config ARCH_OMAP4
 	depends on ARCH_OMAP2PLUS
 	select CPU_V7
 	select ARM_GIC
+	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 3dd620f..c593be4 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the Cortex-A9MPCore tile fitted to the
@@ -22,6 +23,7 @@ config REALVIEW_EB_ARM11MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
@@ -41,6 +43,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6K
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_BARRIERS if SMP
 	help
@@ -82,6 +85,7 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index a8aefc8..9b3d0fb 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,6 +8,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_753970
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 
 endmenu
-- 
1.7.4.1

[PATCH v5 2/5] ARM: SMP: Refactor Kconfig to be more maintainable

[Dave Martin]

Making SMP depend on (huge list of MACH_ and ARCH_ configs) is
bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms are SMP-capable
to the individual machines.  To enable this, a new HAVE_SMP config
option is introduced to allow machines to indicate that they can
run in a SMP configuration.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
        (for nomadik, ux500)
Acked-by: Tony Lindgren <tony@atomide.com>
        (for omap)
---
Changes:

v5: Minor change to the Kconfig help text to make it more
    informative.


 arch/arm/Kconfig               |   18 ++++++++++++++----
 arch/arm/mach-exynos/Kconfig   |    1 +
 arch/arm/mach-imx/Kconfig      |    1 +
 arch/arm/mach-msm/Kconfig      |    1 +
 arch/arm/mach-omap2/Kconfig    |    1 +
 arch/arm/mach-realview/Kconfig |    4 ++++
 arch/arm/mach-vexpress/Kconfig |    1 +
 7 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 16a4b9e..eca82f9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,6 +344,7 @@ config ARCH_HIGHBANK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
@@ -636,6 +637,7 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
@@ -706,6 +708,7 @@ config ARCH_SHMOBILE
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
+	select HAVE_SMP
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
@@ -909,6 +912,7 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Support for ST-Ericsson's Ux500 architecture
@@ -1430,14 +1434,20 @@ menu "Kernel Features"
 
 source "kernel/time/Kconfig"
 
+config HAVE_SMP
+	bool
+	help
+	  This option should be selected by machines which have an SMP-
+	  capable CPU.
+
+	  The only effect of this option is to make the SMP-related
+	  options available to the user for configuration.
+
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
-	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-		 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
+	depends on HAVE_SMP
 	depends on MMU
 	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 7f2347b..e1efbca 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2..29a3d61 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -615,6 +615,7 @@ config SOC_IMX6Q
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
+	select HAVE_SMP
 	select USE_OF
 
 	help
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ebde97f..e6beaff 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -67,6 +67,7 @@ config MSM_SOC_REV_A
 	bool
 config  ARCH_MSM_SCORPIONMP
 	bool
+	select HAVE_SMP
 
 config  ARCH_MSM_ARM11
 	bool
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c841578..bb1b670 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -43,6 +43,7 @@ config ARCH_OMAP4
 	depends on ARCH_OMAP2PLUS
 	select CPU_V7
 	select ARM_GIC
+	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 3dd620f..c593be4 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the Cortex-A9MPCore tile fitted to the
@@ -22,6 +23,7 @@ config REALVIEW_EB_ARM11MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
@@ -41,6 +43,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6K
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_BARRIERS if SMP
 	help
@@ -82,6 +85,7 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index a8aefc8..9b3d0fb 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,6 +8,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_753970
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 
 endmenu
-- 
1.7.4.1

[PATCH v5 2/5] ARM: SMP: Refactor Kconfig to be more maintainable

[Dave Martin]

Making SMP depend on (huge list of MACH_ and ARCH_ configs) is
bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms are SMP-capable
to the individual machines.  To enable this, a new HAVE_SMP config
option is introduced to allow machines to indicate that they can
run in a SMP configuration.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
        (for nomadik, ux500)
Acked-by: Tony Lindgren <tony@atomide.com>
        (for omap)
---
Changes:

v5: Minor change to the Kconfig help text to make it more
    informative.


 arch/arm/Kconfig               |   18 ++++++++++++++----
 arch/arm/mach-exynos/Kconfig   |    1 +
 arch/arm/mach-imx/Kconfig      |    1 +
 arch/arm/mach-msm/Kconfig      |    1 +
 arch/arm/mach-omap2/Kconfig    |    1 +
 arch/arm/mach-realview/Kconfig |    4 ++++
 arch/arm/mach-vexpress/Kconfig |    1 +
 7 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 16a4b9e..eca82f9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,6 +344,7 @@ config ARCH_HIGHBANK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
@@ -636,6 +637,7 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
@@ -706,6 +708,7 @@ config ARCH_SHMOBILE
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
+	select HAVE_SMP
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
@@ -909,6 +912,7 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Support for ST-Ericsson's Ux500 architecture
@@ -1430,14 +1434,20 @@ menu "Kernel Features"
 
 source "kernel/time/Kconfig"
 
+config HAVE_SMP
+	bool
+	help
+	  This option should be selected by machines which have an SMP-
+	  capable CPU.
+
+	  The only effect of this option is to make the SMP-related
+	  options available to the user for configuration.
+
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
-	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-		 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
+	depends on HAVE_SMP
 	depends on MMU
 	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 7f2347b..e1efbca 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2..29a3d61 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -615,6 +615,7 @@ config SOC_IMX6Q
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
+	select HAVE_SMP
 	select USE_OF
 
 	help
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ebde97f..e6beaff 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -67,6 +67,7 @@ config MSM_SOC_REV_A
 	bool
 config  ARCH_MSM_SCORPIONMP
 	bool
+	select HAVE_SMP
 
 config  ARCH_MSM_ARM11
 	bool
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c841578..bb1b670 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -43,6 +43,7 @@ config ARCH_OMAP4
 	depends on ARCH_OMAP2PLUS
 	select CPU_V7
 	select ARM_GIC
+	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 3dd620f..c593be4 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the Cortex-A9MPCore tile fitted to the
@@ -22,6 +23,7 @@ config REALVIEW_EB_ARM11MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
@@ -41,6 +43,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6K
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_BARRIERS if SMP
 	help
@@ -82,6 +85,7 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index a8aefc8..9b3d0fb 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,6 +8,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_753970
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 
 endmenu
-- 
1.7.4.1

[PATCH v5 3/5] omap4: Unconditionally require l2x0 L2 cache controller support

[Dave Martin]

If running in the Normal World on a TrustZone-enabled SoC, Linux
does not have complete control over the L2 cache controller
configuration.  The kernel cannot work reliably on such platforms
without the l2x0 cache support code built in.

This patch unconditionally enables l2x0 support for the OMAP4 SoCs.

Thanks to Rob Herring for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index bb1b670..94e568a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -41,11 +41,11 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	default y
 	depends on ARCH_OMAP2PLUS
+	select CACHE_L2X0
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select ARM_ERRATA_720789
-- 
1.7.4.1

[PATCH v5 3/5] omap4: Unconditionally require l2x0 L2 cache controller support

[Dave Martin]

If running in the Normal World on a TrustZone-enabled SoC, Linux
does not have complete control over the L2 cache controller
configuration.  The kernel cannot work reliably on such platforms
without the l2x0 cache support code built in.

This patch unconditionally enables l2x0 support for the OMAP4 SoCs.

Thanks to Rob Herring for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html

Signed-off-by: Dave Martin <dave.martin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/mach-omap2/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index bb1b670..94e568a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -41,11 +41,11 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	default y
 	depends on ARCH_OMAP2PLUS
+	select CACHE_L2X0
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select ARM_ERRATA_720789
-- 
1.7.4.1

[PATCH v5 3/5] omap4: Unconditionally require l2x0 L2 cache controller support

[Dave Martin]

If running in the Normal World on a TrustZone-enabled SoC, Linux
does not have complete control over the L2 cache controller
configuration.  The kernel cannot work reliably on such platforms
without the l2x0 cache support code built in.

This patch unconditionally enables l2x0 support for the OMAP4 SoCs.

Thanks to Rob Herring for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index bb1b670..94e568a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -41,11 +41,11 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	default y
 	depends on ARCH_OMAP2PLUS
+	select CACHE_L2X0
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select ARM_ERRATA_720789
-- 
1.7.4.1

[PATCH v5 4/5] highbank: Unconditionally require l2x0 L2 cache controller support

[Dave Martin]

If running in the Normal World on a TrustZone-enabled SoC, Linux
does not have complete control over the L2 cache controller
configuration.  The kernel cannot work reliably on such platforms
without the l2x0 cache support code built in.

This patch unconditionally enables l2x0 support for the Highbank
SoC.

Thanks to Rob Herring for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
---
 arch/arm/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eca82f9..1792146 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -340,12 +340,12 @@ config ARCH_HIGHBANK
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CACHE_L2X0
 	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
 	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
-- 
1.7.4.1

[PATCH v5 4/5] highbank: Unconditionally require l2x0 L2 cache controller support

[Dave Martin]

If running in the Normal World on a TrustZone-enabled SoC, Linux
does not have complete control over the L2 cache controller
configuration.  The kernel cannot work reliably on such platforms
without the l2x0 cache support code built in.

This patch unconditionally enables l2x0 support for the Highbank
SoC.

Thanks to Rob Herring for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html

Signed-off-by: Dave Martin <dave.martin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eca82f9..1792146 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -340,12 +340,12 @@ config ARCH_HIGHBANK
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CACHE_L2X0
 	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
 	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
-- 
1.7.4.1

[PATCH v5 4/5] highbank: Unconditionally require l2x0 L2 cache controller support

[Dave Martin]

If running in the Normal World on a TrustZone-enabled SoC, Linux
does not have complete control over the L2 cache controller
configuration.  The kernel cannot work reliably on such platforms
without the l2x0 cache support code built in.

This patch unconditionally enables l2x0 support for the Highbank
SoC.

Thanks to Rob Herring for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
---
 arch/arm/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eca82f9..1792146 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -340,12 +340,12 @@ config ARCH_HIGHBANK
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CACHE_L2X0
 	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
 	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
-- 
1.7.4.1

[PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support

[Dave Martin]

The i.MX6 Quad SoC will work without the l2x0 L2 cache controller
support built into the kernel, so this patch removes the dependency
on CACHE_L2X0.

This makes the l2x0 support optional, so that it can be turned off
when desired for debugging purposes etc.

Since SOC_IMX6Q already depends on ARCH_IMX_V6_V7 and
ARCH_IMX_V6_V7 selects MIGHT_HAVE_CACHE_L2X0, there is no need to
select that option explicitly from SOC_IMX6Q.

Thanks to Shawn Guo for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074602.html

Signed-off-by: Dave Martin <dave.martin@linaro.org>
---
Changes:

v5: Don't select MIGHT_HAVE_CACHE_L2X0 directly from SOC_IMX6Q, but
    instead select implicitly via ARCH_IMX_V6_V7 (which we expect
    to be selected by other relevant SoCs).  Thanks to Shawn for
    this suggestion.


 arch/arm/mach-imx/Kconfig |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 29a3d61..1530678 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -609,7 +609,6 @@ comment "i.MX6 family:"
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
 	select ARM_GIC
-	select CACHE_L2X0
 	select CPU_V7
 	select HAVE_ARM_SCU
 	select HAVE_IMX_GPC
-- 
1.7.4.1

[PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support

[Dave Martin]

The i.MX6 Quad SoC will work without the l2x0 L2 cache controller
support built into the kernel, so this patch removes the dependency
on CACHE_L2X0.

This makes the l2x0 support optional, so that it can be turned off
when desired for debugging purposes etc.

Since SOC_IMX6Q already depends on ARCH_IMX_V6_V7 and
ARCH_IMX_V6_V7 selects MIGHT_HAVE_CACHE_L2X0, there is no need to
select that option explicitly from SOC_IMX6Q.

Thanks to Shawn Guo for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074602.html

Signed-off-by: Dave Martin <dave.martin@linaro.org>
---
Changes:

v5: Don't select MIGHT_HAVE_CACHE_L2X0 directly from SOC_IMX6Q, but
    instead select implicitly via ARCH_IMX_V6_V7 (which we expect
    to be selected by other relevant SoCs).  Thanks to Shawn for
    this suggestion.


 arch/arm/mach-imx/Kconfig |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 29a3d61..1530678 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -609,7 +609,6 @@ comment "i.MX6 family:"
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
 	select ARM_GIC
-	select CACHE_L2X0
 	select CPU_V7
 	select HAVE_ARM_SCU
 	select HAVE_IMX_GPC
-- 
1.7.4.1

[PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support

[Dave Martin]

The i.MX6 Quad SoC will work without the l2x0 L2 cache controller
support built into the kernel, so this patch removes the dependency
on CACHE_L2X0.

This makes the l2x0 support optional, so that it can be turned off
when desired for debugging purposes etc.

Since SOC_IMX6Q already depends on ARCH_IMX_V6_V7 and
ARCH_IMX_V6_V7 selects MIGHT_HAVE_CACHE_L2X0, there is no need to
select that option explicitly from SOC_IMX6Q.

Thanks to Shawn Guo for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074602.html

Signed-off-by: Dave Martin <dave.martin@linaro.org>
---
Changes:

v5: Don't select MIGHT_HAVE_CACHE_L2X0 directly from SOC_IMX6Q, but
    instead select implicitly via ARCH_IMX_V6_V7 (which we expect
    to be selected by other relevant SoCs).  Thanks to Shawn for
    this suggestion.


 arch/arm/mach-imx/Kconfig |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 29a3d61..1530678 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -609,7 +609,6 @@ comment "i.MX6 family:"
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
 	select ARM_GIC
-	select CACHE_L2X0
 	select CPU_V7
 	select HAVE_ARM_SCU
 	select HAVE_IMX_GPC
-- 
1.7.4.1

Re: [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more

[Shawn Guo]

On Thu, Dec 15, 2011 at 03:53:50PM +0000, Dave Martin wrote:
> Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
> is bothersome to maintain and likely to lead to merge conflicts.
> 
> This patch moves the knowledge of which platforms have a L2x0 or
> PL310 cache controller to the individual machines.  To enable this,
> a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
> machines to indicate that they may have such a cache controller
> independently of each other.
> 
> Boards/SoCs which cannot reliably operate without the L2 cache
> controller support will need to select CACHE_L2X0 directly from
> their own Kconfigs instead.  This applies to some TrustZone-enabled
> boards where Linux runs in the Normal World, for example.
> 
> Signed-off-by: Dave Martin <dave.martin@linaro.org>
> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
>         (for cns3xxx)
> Acked-by: Tony Lindgren <tony@atomide.com>
>         (for omap)
> ---
[...]
> diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
> index b3a1f2b..b30708e 100644
> --- a/arch/arm/plat-mxc/Kconfig
> +++ b/arch/arm/plat-mxc/Kconfig
> @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
>  	bool "i.MX3, i.MX6"
>  	select AUTO_ZRELADDR if !ZBOOT_ROM
>  	select ARM_PATCH_PHYS_VIRT
> +	select MIGHT_HAVE_CACHE_L2X0
>  	help
>  	  This enables support for systems based on the Freescale i.MX3 and i.MX6
>  	  family.

Acked-by: Shawn Guo <shawn.guo@linaro.org>

-- 
Regards,
Shawn

Re: [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

[Shawn Guo]

On Thu, Dec 15, 2011 at 03:53:50PM +0000, Dave Martin wrote:
> Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
> is bothersome to maintain and likely to lead to merge conflicts.
> 
> This patch moves the knowledge of which platforms have a L2x0 or
> PL310 cache controller to the individual machines.  To enable this,
> a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
> machines to indicate that they may have such a cache controller
> independently of each other.
> 
> Boards/SoCs which cannot reliably operate without the L2 cache
> controller support will need to select CACHE_L2X0 directly from
> their own Kconfigs instead.  This applies to some TrustZone-enabled
> boards where Linux runs in the Normal World, for example.
> 
> Signed-off-by: Dave Martin <dave.martin@linaro.org>
> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
>         (for cns3xxx)
> Acked-by: Tony Lindgren <tony@atomide.com>
>         (for omap)
> ---
[...]
> diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
> index b3a1f2b..b30708e 100644
> --- a/arch/arm/plat-mxc/Kconfig
> +++ b/arch/arm/plat-mxc/Kconfig
> @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
>  	bool "i.MX3, i.MX6"
>  	select AUTO_ZRELADDR if !ZBOOT_ROM
>  	select ARM_PATCH_PHYS_VIRT
> +	select MIGHT_HAVE_CACHE_L2X0
>  	help
>  	  This enables support for systems based on the Freescale i.MX3 and i.MX6
>  	  family.

Acked-by: Shawn Guo <shawn.guo@linaro.org>

-- 
Regards,
Shawn

[PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

[Shawn Guo]

On Thu, Dec 15, 2011 at 03:53:50PM +0000, Dave Martin wrote:
> Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
> is bothersome to maintain and likely to lead to merge conflicts.
> 
> This patch moves the knowledge of which platforms have a L2x0 or
> PL310 cache controller to the individual machines.  To enable this,
> a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
> machines to indicate that they may have such a cache controller
> independently of each other.
> 
> Boards/SoCs which cannot reliably operate without the L2 cache
> controller support will need to select CACHE_L2X0 directly from
> their own Kconfigs instead.  This applies to some TrustZone-enabled
> boards where Linux runs in the Normal World, for example.
> 
> Signed-off-by: Dave Martin <dave.martin@linaro.org>
> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
>         (for cns3xxx)
> Acked-by: Tony Lindgren <tony@atomide.com>
>         (for omap)
> ---
[...]
> diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
> index b3a1f2b..b30708e 100644
> --- a/arch/arm/plat-mxc/Kconfig
> +++ b/arch/arm/plat-mxc/Kconfig
> @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
>  	bool "i.MX3, i.MX6"
>  	select AUTO_ZRELADDR if !ZBOOT_ROM
>  	select ARM_PATCH_PHYS_VIRT
> +	select MIGHT_HAVE_CACHE_L2X0
>  	help
>  	  This enables support for systems based on the Freescale i.MX3 and i.MX6
>  	  family.

Acked-by: Shawn Guo <shawn.guo@linaro.org>

-- 
Regards,
Shawn

Re: [PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2

[Shawn Guo]

On Thu, Dec 15, 2011 at 03:53:54PM +0000, Dave Martin wrote:
> The i.MX6 Quad SoC will work without the l2x0 L2 cache controller
> support built into the kernel, so this patch removes the dependency
> on CACHE_L2X0.
> 
> This makes the l2x0 support optional, so that it can be turned off
> when desired for debugging purposes etc.
> 
> Since SOC_IMX6Q already depends on ARCH_IMX_V6_V7 and
> ARCH_IMX_V6_V7 selects MIGHT_HAVE_CACHE_L2X0, there is no need to
> select that option explicitly from SOC_IMX6Q.
> 
> Thanks to Shawn Guo for this suggestion.  [1]
> 
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074602.html
> 
> Signed-off-by: Dave Martin <dave.martin@linaro.org>

Acked-and-Tested-by: Shawn Guo <shawn.guo@linaro.org>

Regards,
Shawn

> ---
> Changes:
> 
> v5: Don't select MIGHT_HAVE_CACHE_L2X0 directly from SOC_IMX6Q, but
>     instead select implicitly via ARCH_IMX_V6_V7 (which we expect
>     to be selected by other relevant SoCs).  Thanks to Shawn for
>     this suggestion.
> 
> 
>  arch/arm/mach-imx/Kconfig |    1 -
>  1 files changed, 0 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 29a3d61..1530678 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -609,7 +609,6 @@ comment "i.MX6 family:"
>  config SOC_IMX6Q
>  	bool "i.MX6 Quad support"
>  	select ARM_GIC
> -	select CACHE_L2X0
>  	select CPU_V7
>  	select HAVE_ARM_SCU
>  	select HAVE_IMX_GPC
> -- 
> 1.7.4.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Re: [PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support

[Shawn Guo]

On Thu, Dec 15, 2011 at 03:53:54PM +0000, Dave Martin wrote:
> The i.MX6 Quad SoC will work without the l2x0 L2 cache controller
> support built into the kernel, so this patch removes the dependency
> on CACHE_L2X0.
> 
> This makes the l2x0 support optional, so that it can be turned off
> when desired for debugging purposes etc.
> 
> Since SOC_IMX6Q already depends on ARCH_IMX_V6_V7 and
> ARCH_IMX_V6_V7 selects MIGHT_HAVE_CACHE_L2X0, there is no need to
> select that option explicitly from SOC_IMX6Q.
> 
> Thanks to Shawn Guo for this suggestion.  [1]
> 
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074602.html
> 
> Signed-off-by: Dave Martin <dave.martin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Acked-and-Tested-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Regards,
Shawn

> ---
> Changes:
> 
> v5: Don't select MIGHT_HAVE_CACHE_L2X0 directly from SOC_IMX6Q, but
>     instead select implicitly via ARCH_IMX_V6_V7 (which we expect
>     to be selected by other relevant SoCs).  Thanks to Shawn for
>     this suggestion.
> 
> 
>  arch/arm/mach-imx/Kconfig |    1 -
>  1 files changed, 0 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 29a3d61..1530678 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -609,7 +609,6 @@ comment "i.MX6 family:"
>  config SOC_IMX6Q
>  	bool "i.MX6 Quad support"
>  	select ARM_GIC
> -	select CACHE_L2X0
>  	select CPU_V7
>  	select HAVE_ARM_SCU
>  	select HAVE_IMX_GPC
> -- 
> 1.7.4.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support

[Shawn Guo]

On Thu, Dec 15, 2011 at 03:53:54PM +0000, Dave Martin wrote:
> The i.MX6 Quad SoC will work without the l2x0 L2 cache controller
> support built into the kernel, so this patch removes the dependency
> on CACHE_L2X0.
> 
> This makes the l2x0 support optional, so that it can be turned off
> when desired for debugging purposes etc.
> 
> Since SOC_IMX6Q already depends on ARCH_IMX_V6_V7 and
> ARCH_IMX_V6_V7 selects MIGHT_HAVE_CACHE_L2X0, there is no need to
> select that option explicitly from SOC_IMX6Q.
> 
> Thanks to Shawn Guo for this suggestion.  [1]
> 
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074602.html
> 
> Signed-off-by: Dave Martin <dave.martin@linaro.org>

Acked-and-Tested-by: Shawn Guo <shawn.guo@linaro.org>

Regards,
Shawn

> ---
> Changes:
> 
> v5: Don't select MIGHT_HAVE_CACHE_L2X0 directly from SOC_IMX6Q, but
>     instead select implicitly via ARCH_IMX_V6_V7 (which we expect
>     to be selected by other relevant SoCs).  Thanks to Shawn for
>     this suggestion.
> 
> 
>  arch/arm/mach-imx/Kconfig |    1 -
>  1 files changed, 0 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 29a3d61..1530678 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -609,7 +609,6 @@ comment "i.MX6 family:"
>  config SOC_IMX6Q
>  	bool "i.MX6 Quad support"
>  	select ARM_GIC
> -	select CACHE_L2X0
>  	select CPU_V7
>  	select HAVE_ARM_SCU
>  	select HAVE_IMX_GPC
> -- 
> 1.7.4.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Re: [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

[Olof Johansson]

On Thu, Dec 15, 2011 at 7:53 AM, Dave Martin <dave.martin@linaro.org> wrote:
> Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
> is bothersome to maintain and likely to lead to merge conflicts.
>
> This patch moves the knowledge of which platforms have a L2x0 or
> PL310 cache controller to the individual machines.  To enable this,
> a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
> machines to indicate that they may have such a cache controller
> independently of each other.
>
> Boards/SoCs which cannot reliably operate without the L2 cache
> controller support will need to select CACHE_L2X0 directly from
> their own Kconfigs instead.  This applies to some TrustZone-enabled
> boards where Linux runs in the Normal World, for example.
>
> Signed-off-by: Dave Martin <dave.martin@linaro.org>
> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
>        (for cns3xxx)
> Acked-by: Tony Lindgren <tony@atomide.com>
>        (for omap)

Acked-by: Olof Johansson <olof@lixom.net> (for tegra)


-Olof

Re: [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

[Olof Johansson]

On Thu, Dec 15, 2011 at 7:53 AM, Dave Martin <dave.martin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
> is bothersome to maintain and likely to lead to merge conflicts.
>
> This patch moves the knowledge of which platforms have a L2x0 or
> PL310 cache controller to the individual machines.  To enable this,
> a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
> machines to indicate that they may have such a cache controller
> independently of each other.
>
> Boards/SoCs which cannot reliably operate without the L2 cache
> controller support will need to select CACHE_L2X0 directly from
> their own Kconfigs instead.  This applies to some TrustZone-enabled
> boards where Linux runs in the Normal World, for example.
>
> Signed-off-by: Dave Martin <dave.martin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Acked-by: Anton Vorontsov <cbouatmailru-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>        (for cns3xxx)
> Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
>        (for omap)

Acked-by: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org> (for tegra)


-Olof

[PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

[Olof Johansson]

On Thu, Dec 15, 2011 at 7:53 AM, Dave Martin <dave.martin@linaro.org> wrote:
> Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
> is bothersome to maintain and likely to lead to merge conflicts.
>
> This patch moves the knowledge of which platforms have a L2x0 or
> PL310 cache controller to the individual machines. ?To enable this,
> a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
> machines to indicate that they may have such a cache controller
> independently of each other.
>
> Boards/SoCs which cannot reliably operate without the L2 cache
> controller support will need to select CACHE_L2X0 directly from
> their own Kconfigs instead. ?This applies to some TrustZone-enabled
> boards where Linux runs in the Normal World, for example.
>
> Signed-off-by: Dave Martin <dave.martin@linaro.org>
> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
> ? ? ? ?(for cns3xxx)
> Acked-by: Tony Lindgren <tony@atomide.com>
> ? ? ? ?(for omap)

Acked-by: Olof Johansson <olof@lixom.net> (for tegra)


-Olof