[PATCH 2/4] ASoC: Remove I2C ifdefs from wm8961 driver

[Mark Brown <broonie@opensource.wolfsonmicro.com>]

The driver only supports I2C so no need to conditionalise its use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm8961.c |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
index 58fbf0a..13a0850 100644
--- a/sound/soc/codecs/wm8961.c
+++ b/sound/soc/codecs/wm8961.c
@@ -1081,7 +1081,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8961 = {
 	.volatile_register = wm8961_volatile_register,
 };
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 static __devinit int wm8961_i2c_probe(struct i2c_client *i2c,
 				      const struct i2c_device_id *id)
 {
@@ -1123,27 +1122,22 @@ static struct i2c_driver wm8961_i2c_driver = {
 	.remove =   __devexit_p(wm8961_i2c_remove),
 	.id_table = wm8961_i2c_id,
 };
-#endif
 
 static int __init wm8961_modinit(void)
 {
 	int ret = 0;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	ret = i2c_add_driver(&wm8961_i2c_driver);
 	if (ret != 0) {
 		printk(KERN_ERR "Failed to register wm8961 I2C driver: %d\n",
 		       ret);
 	}
-#endif
 	return ret;
 }
 module_init(wm8961_modinit);
 
 static void __exit wm8961_exit(void)
 {
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	i2c_del_driver(&wm8961_i2c_driver);
-#endif
 }
 module_exit(wm8961_exit);
 
-- 
1.7.7.3