[U-Boot] [PATCH 1/4] fpga: add definition for Xilinx Spartan-6 XC6SLX4

[U-Boot] [PATCH 1/4] fpga: add definition for Xilinx Spartan-6 XC6SLX4

[Stefano Babic]

Signed-off-by: Stefano Babic <sbabic@denx.de>
---
 include/spartan3.h |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/include/spartan3.h b/include/spartan3.h
index 67ede4b..89f1156 100644
--- a/include/spartan3.h
+++ b/include/spartan3.h
@@ -80,6 +80,12 @@ typedef struct {
 #define	XILINX_XC3S1200E_SIZE	3841184/8
 #define	XILINX_XC3S1600E_SIZE	5969696/8
 
+/*
+ * Spartan-6 : the Spartan-6 family can be programmed
+ * exactly as the Spartan-3
+ */
+#define XILINK_XC6SLX4_SIZE	(3713568/8)
+
 /* Descriptor Macros
  *********************************************************************/
 /* Spartan-III devices */
@@ -123,4 +129,7 @@ typedef struct {
 #define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \
 { Xilinx_Spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie }
 
+#define XILINX_XC6SLX4_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan3, iface, XILINK_XC6SLX4_SIZE, fn_table, cookie }
+
 #endif /* _SPARTAN3_H_ */
-- 
1.7.5.4

[U-Boot] [PATCH 2/4] FPGA: use debug() instead of module debug printf

[Stefano Babic]

Replace also __FUNCTION__ with standard __func__

Signed-off-by: Stefano Babic <sbabic@denx.de>
---
 common/cmd_fpga.c |   59 +++++++++++++++++++++++++---------------------------
 1 files changed, 28 insertions(+), 31 deletions(-)

diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 8946345..915a5c0 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -33,16 +33,6 @@
 #include <fpga.h>
 #include <malloc.h>
 
-#if 0
-#define	FPGA_DEBUG
-#endif
-
-#ifdef	FPGA_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
 /* Local functions */
 static int fpga_get_op (char *opstr);
 
@@ -76,8 +66,9 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 	length = (*dataptr << 8) + *(dataptr+1);
 	dataptr+=2;
 	if (*dataptr++ != 0x61) {
-		PRINTF ("%s: Design name identifier not recognized in bitstream\n",
-			__FUNCTION__ );
+		debug("%s: Design name identifier not recognized "
+			"in bitstream\n",
+			__func__);
 		return FPGA_FAIL;
 	}
 
@@ -90,8 +81,9 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 
 	/* get part number (identifier, length, string) */
 	if (*dataptr++ != 0x62) {
-		printf("%s: Part number identifier not recognized in bitstream\n",
-			__FUNCTION__ );
+		printf("%s: Part number identifier not recognized "
+			"in bitstream\n",
+			__func__);
 		return FPGA_FAIL;
 	}
 
@@ -104,7 +96,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 	/* get date (identifier, length, string) */
 	if (*dataptr++ != 0x63) {
 		printf("%s: Date identifier not recognized in bitstream\n",
-		       __FUNCTION__);
+		       __func__);
 		return FPGA_FAIL;
 	}
 
@@ -116,7 +108,8 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 
 	/* get time (identifier, length, string) */
 	if (*dataptr++ != 0x64) {
-		printf("%s: Time identifier not recognized in bitstream\n",__FUNCTION__);
+		printf("%s: Time identifier not recognized in bitstream\n",
+			__func__);
 		return FPGA_FAIL;
 	}
 
@@ -129,7 +122,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 	/* get fpga data length (identifier, length) */
 	if (*dataptr++ != 0x65) {
 		printf("%s: Data length identifier not recognized in bitstream\n",
-			__FUNCTION__);
+			__func__);
 		return FPGA_FAIL;
 	}
 	swapsize = ((unsigned int) *dataptr     <<24) +
@@ -183,39 +176,43 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 		if (fit_parse_subimage (argv[3], (ulong)fpga_data,
 					&fit_addr, &fit_uname)) {
 			fpga_data = (void *)fit_addr;
-			debug ("*  fpga: subimage '%s' from FIT image@0x%08lx\n",
-					fit_uname, fit_addr);
+			debug("*  fpga: subimage '%s' from FIT image "
+				"at 0x%08lx\n",
+				fit_uname, fit_addr);
 		} else
 #endif
 		{
 			fpga_data = (void *) simple_strtoul (argv[3], NULL, 16);
-			debug ("*  fpga: cmdline image address = 0x%08lx\n", (ulong)fpga_data);
+			debug("*  fpga: cmdline image address = 0x%08lx\n",
+				(ulong)fpga_data);
 		}
-		PRINTF ("%s: fpga_data = 0x%x\n", __FUNCTION__, (uint) fpga_data);
+		debug("%s: fpga_data = 0x%x\n", __func__, (uint) fpga_data);
 
 	case 3:		/* fpga <op> <dev | data addr> */
 		dev = (int) simple_strtoul (argv[2], NULL, 16);
-		PRINTF ("%s: device = %d\n", __FUNCTION__, dev);
+		debug("%s: device = %d\n", __func__, dev);
 		/* FIXME - this is a really weak test */
 		if ((argc == 3) && (dev > fpga_count ())) {	/* must be buffer ptr */
-			PRINTF ("%s: Assuming buffer pointer in arg 3\n",
-				__FUNCTION__);
+			debug("%s: Assuming buffer pointer in arg 3\n",
+				__func__);
 
 #if defined(CONFIG_FIT)
 			if (fit_parse_subimage (argv[2], (ulong)fpga_data,
 						&fit_addr, &fit_uname)) {
 				fpga_data = (void *)fit_addr;
-				debug ("*  fpga: subimage '%s' from FIT image at 0x%08lx\n",
-						fit_uname, fit_addr);
+				debug("*  fpga: subimage '%s' from FIT image "
+					"at 0x%08lx\n",
+					fit_uname, fit_addr);
 			} else
 #endif
 			{
 				fpga_data = (void *) dev;
-				debug ("*  fpga: cmdline image address = 0x%08lx\n", (ulong)fpga_data);
+				debug("*  fpga: cmdline image address = "
+					"0x%08lx\n", (ulong)fpga_data);
 			}
 
-			PRINTF ("%s: fpga_data = 0x%x\n",
-				__FUNCTION__, (uint) fpga_data);
+			debug("%s: fpga_data = 0x%x\n",
+				__func__, (uint) fpga_data);
 			dev = FPGA_INVALID_DEVICE;	/* reset device num */
 		}
 
@@ -224,8 +221,8 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 		break;
 
 	default:
-		PRINTF ("%s: Too many or too few args (%d)\n",
-			__FUNCTION__, argc);
+		debug("%s: Too many or too few args (%d)\n",
+			__func__, argc);
 		op = FPGA_NONE;	/* force usage display */
 		break;
 	}
-- 
1.7.5.4

[U-Boot] [PATCH 2/4] FPGA: use debug() instead of module debug printf

[Wolfgang Denk]

Dear Stefano Babic,

In message <1325090823-8051-2-git-send-email-sbabic@denx.de> you wrote:
> Replace also __FUNCTION__ with standard __func__
> 
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> ---
>  common/cmd_fpga.c |   59 +++++++++++++++++++++++++---------------------------
>  1 files changed, 28 insertions(+), 31 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Don't try to outweird me, three-eyes. I get stranger things than you
free with my breakfast cereal."
           - Zaphod Beeblebrox in  "Hitchhiker's Guide to the Galaxy"

[U-Boot] [PATCH 3/4] fpga: Spartan-3: let print the progress if configured

[Stefano Babic]

CONFIG_SYS_FPGA_PROG_FEEDBACK was already introduced to print
the current status of FPGA loading - an undef in the code made this
CONFIG_ useless.

Signed-off-by: Stefano Babic <sbabic@denx.de>
---
 drivers/fpga/spartan3.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c
index 9207391..1633a70 100644
--- a/drivers/fpga/spartan3.c
+++ b/drivers/fpga/spartan3.c
@@ -38,7 +38,6 @@
 #endif
 
 #undef CONFIG_SYS_FPGA_CHECK_BUSY
-#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
 
 /* Note: The assumption is that we cannot possibly run fast enough to
  * overrun the device (the Slave Parallel mode can free run at 50MHz).
-- 
1.7.5.4

[U-Boot] [PATCH 3/4] fpga: Spartan-3: let print the progress if configured

[Wolfgang Denk]

Dear Stefano Babic,

In message <1325090823-8051-3-git-send-email-sbabic@denx.de> you wrote:
> CONFIG_SYS_FPGA_PROG_FEEDBACK was already introduced to print
> the current status of FPGA loading - an undef in the code made this
> CONFIG_ useless.
> 
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> ---
>  drivers/fpga/spartan3.c |    1 -
>  1 files changed, 0 insertions(+), 1 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
This is now.  Later is later.

[U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux

[Stefano Babic]

The mt_ventoux board is a custom board using
the Technexion TAM3517 module.

Signed-off-by: Stefano Babic <sbabic@denx.de>
---
 MAINTAINERS                          |    1 +
 board/teejet/mt_ventoux/Makefile     |   44 ++++
 board/teejet/mt_ventoux/mt_ventoux.c |  235 +++++++++++++++++++
 board/teejet/mt_ventoux/mt_ventoux.h |  429 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/mt_ventoux.h         |   61 +++++
 6 files changed, 771 insertions(+), 0 deletions(-)
 create mode 100644 board/teejet/mt_ventoux/Makefile
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
 create mode 100644 include/configs/mt_ventoux.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 4e3246d..d680eaf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -558,6 +558,7 @@ Stefano Babic <sbabic@denx.de>
 
 	ea20		davinci
 	flea3		i.MX35
+	mt_ventoux	omap3
 	mx35pdk		i.MX35
 	mx51evk		i.MX51
 	polaris		xscale/pxa
diff --git a/board/teejet/mt_ventoux/Makefile b/board/teejet/mt_ventoux/Makefile
new file mode 100644
index 0000000..ce20ec7
--- /dev/null
+++ b/board/teejet/mt_ventoux/Makefile
@@ -0,0 +1,44 @@
+#
+# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+#
+# Based on ti/evm/Makefile
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
new file mode 100644
index 0000000..dd8e244
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <fpga.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <i2c.h>
+#include <spartan3.h>
+#include <asm/gpio.h>
+#include "mt_ventoux.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_FPGA)
+
+#define FPGA_RESET	62
+#define FPGA_PROG	116
+#define FPGA_CCLK	117
+#define FPGA_DIN	118
+#define FPGA_INIT	119
+#define FPGA_DONE	154
+
+/* Timing definitions for FPGA */
+static const u32 gpmc_fpga[] = {
+	FPGA_GPMC_CONFIG1,
+	FPGA_GPMC_CONFIG2,
+	FPGA_GPMC_CONFIG3,
+	FPGA_GPMC_CONFIG4,
+	FPGA_GPMC_CONFIG5,
+	FPGA_GPMC_CONFIG6,
+};
+
+static void fpga_reset(int nassert)
+{
+	if (nassert)
+		gpio_set_value(FPGA_RESET, 0);
+	else
+		gpio_set_value(FPGA_RESET, 1);
+}
+
+int fpga_pgm_fn(int nassert, int nflush, int cookie)
+{
+	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
+
+	if (nassert) {
+		gpio_set_value(FPGA_PROG, 0);
+		debug("asserted\n");
+	} else {
+		gpio_set_value(FPGA_PROG, 1);
+		debug("deasserted\n");
+	}
+
+	return nassert;
+}
+
+int fpga_init_fn(int cookie)
+{
+	u32 val = gpio_get_value(FPGA_INIT);
+
+	return (val == 0);
+}
+
+int fpga_done_fn(int cookie)
+{
+	u32 val = gpio_get_value(FPGA_DONE);
+
+	if (val)
+		return 1;
+
+	return 0;
+}
+
+int fpga_pre_config_fn(int cookie)
+{
+
+	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
+
+	/* Setting GPIOs for programming Mode */
+	gpio_request(FPGA_RESET, "FPGA_RESET");
+	gpio_direction_output(FPGA_RESET, 1);
+	gpio_request(FPGA_PROG, "FPGA_PROG");
+	gpio_direction_output(FPGA_PROG, 1);
+	gpio_request(FPGA_CCLK, "FPGA_CCLK");
+	gpio_direction_output(FPGA_CCLK, 1);
+	gpio_request(FPGA_DIN, "FPGA_DIN");
+	gpio_direction_output(FPGA_DIN, 0);
+	gpio_request(FPGA_INIT, "FPGA_INIT");
+	gpio_direction_input(FPGA_INIT);
+	gpio_request(FPGA_DONE, "FPGA_DONE");
+	gpio_direction_input(FPGA_DONE);
+
+	/* Be sure that signal are deasserted */
+	gpio_set_value(FPGA_RESET, 1);
+	gpio_set_value(FPGA_PROG, 1);
+
+	return 0;
+}
+
+int fpga_post_config_fn(int cookie)
+{
+
+	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
+
+	fpga_reset(TRUE);
+	udelay(100);
+	fpga_reset(FALSE);
+
+	return 0;
+}
+
+/* Write program to the FPGA */
+int fpga_wr_fn(int nassert_write, int flush, int cookie)
+{
+	if (nassert_write)
+		gpio_set_value(FPGA_DIN, 1);
+	else
+		gpio_set_value(FPGA_DIN, 0);
+
+	return nassert_write;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	if (assert_clk)
+		gpio_set_value(FPGA_CCLK, 1);
+	else
+		gpio_set_value(FPGA_CCLK, 0);
+
+	return assert_clk;
+}
+
+Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_clk_fn,
+	fpga_init_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_post_config_fn,
+};
+
+Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
+			(void *)&mt_ventoux_fpga_fns, 0);
+
+/* Initialize the FPGA */
+static void mt_ventoux_init_fpga(void)
+{
+	fpga_pre_config_fn(0);
+
+	/* Setting CS1 for FPGA access */
+	enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
+		FPGA_BASE_ADDR, GPMC_SIZE_128M);
+
+	fpga_init();
+	fpga_add(fpga_xilinx, &fpga);
+}
+#endif
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+#if defined(CONFIG_FPGA)
+	mt_ventoux_init_fpga();
+#endif
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_MT_VENTOUX();
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int board_eth_init(bd_t *bis)
+{
+	davinci_emac_initialize();
+	return 0;
+}
+
+#if defined(CONFIG_GENERIC_MMC) && defined(CONFIG_OMAP_HSMMC) && \
+	!defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+	return omap_mmc_init(0);
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
new file mode 100644
index 0000000..34c1ec5
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2011 Stefano Babic <sbabic@denx.de>
+ *
+ * Author: Hardy Weng <hardy.weng@technexion.com>
+ *
+ * Copyright (C) 2010 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef _MT_VENTOUX_H_
+#define _MT_VENTOUX_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"Teejet MT_VENTOUX Board",
+	"NAND",
+};
+
+/* FPGA CS1 configuration */
+#define FPGA_GPMC_CONFIG1	0x00001200
+#define FPGA_GPMC_CONFIG2	0x00111a00
+#define FPGA_GPMC_CONFIG3	0x00010100
+#define FPGA_GPMC_CONFIG4	0x06041a04
+#define FPGA_GPMC_CONFIG5	0x0019101a
+#define FPGA_GPMC_CONFIG6	0x890503c0
+#define FPGA_GPMC_CONFIG7	0x00000860
+
+#define FPGA_BASE_ADDR		0x20000000
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN	- Pull type selection is active
+ * M0	- Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_MT_VENTOUX() \
+	/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
+	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
+	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
+	/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS1),		(IEN | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTD | EN  | M4))/* GPIO 53 */\
+	MUX_VAL(CP(GPMC_NCS3),		(IEN | PTU | EN | M4))	/* GPIO 54 */\
+	MUX_VAL(CP(GPMC_NCS4),		(IEN | PTD | EN | M4)) \
+			/* GPIO 55 : NFS */\
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_NCS6),		(IDIS  | PTD | EN | M3)) /*PWM11*/ \
+	MUX_VAL(CP(GPMC_NCS7),		(IDIS  | PTD | EN | M4)) /*GPIO_58*/ \
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M4)) \
+			/*GPIO_62: FPGA_RESET */ \
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
+	/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
+	/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
+	/* MMC */\
+	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO_126: CardDetect */\
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
+	\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | DIS  | M0)) /*MMC2_CMD*/\
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT0*/\
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT1*/\
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT2*/\
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT3*/\
+	MUX_VAL(CP(MMC2_DAT4),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_138: LCD_ENVD */\
+	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_139: LCD_PON */\
+	/* McBSP */\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_116: FPGA_PROG */ \
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN | PTD | EN | M4)) \
+			/* GPIO_117: FPGA_CCLK */ \
+	MUX_VAL(CP(MCBSP2_DR),		(IEN | PTD | EN | M4)) \
+			/* GPIO_118: FPGA_DIN */ \
+	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_119: FPGA_INIT */ \
+	\
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
+			/* GPIO_140: speaker #mute */\
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
+			/* GPIO_141: Buzz Hi */\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
+	\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_152: Ignition Sense */ \
+	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) \
+			/*GPIO_153: Power Button Sense */ \
+	MUX_VAL(CP(MCBSP4_DX),		(IEN | PTU | DIS | M4)) \
+			/* GPIO_154: FPGA_DONE */ \
+	MUX_VAL(CP(MCBSP4_FSX),		(IEN | PTD | DIS | M4)) \
+			/* GPIO_155: CA8_irq */ \
+	/* UART */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_RTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_149: USB status 2 */\
+	MUX_VAL(CP(UART1_CTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_150: USB status 1 */\
+	\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) \
+			/*GPIO_163 : TS_PENIRQ*/ \
+	MUX_VAL(CP(UART3_RTS_SD),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_164 : MMC */\
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
+	/* I2C */\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	/* McSPI */\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MCSPI1_CS1),		(IEN | PTD | EN | M4)) /*GPIO_175*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IEN | PTD | EN | M4)) /*GPIO_176*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN | PTD | EN | M4)) \
+	\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) \
+	/* CCDC */\
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO95: #Enable Output */\
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO 99: #SOM_PWR_OFF */\
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO_100: #power out */\
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	/* RMII */\
+	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
+	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
+	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
+	/* HECC */\
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
+	/* HSUSB */\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
+	/* HDQ */\
+	MUX_VAL(CP(HDQ_SIO),		(IEN | PTD | EN | M4)) \
+			/* GPIO_170: auto update */\
+	/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
+			/* - GPIO30 */\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4*/\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
+	/* JTAG */\
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU0),		(IDIS  | PTD | EN | M4)) /*GPIO_11*/ \
+	MUX_VAL(CP(JTAG_EMU1),		(IDIS  | PTD | EN | M4)) /*GPIO_31*/ \
+	/* ETK (ES2 onwards) */\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTD | DIS  | M3)) \
+					/* hsusb1_stp */ \
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)) \
+					/* hsusb1_clk */\
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) \
+	/* Die to Die */\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+
+#endif
diff --git a/boards.cfg b/boards.cfg
index 7826e29..7a3088b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -195,6 +195,7 @@ omap3_evm_quick_nand         arm         armv7       evm                 ti
 omap3_sdp3430                arm         armv7       sdp3430             ti             omap3
 devkit8000                   arm         armv7       devkit8000          timll          omap3
 mcx                          arm         armv7       mcx                 htkw           omap3
+mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
 twister                      arm         armv7       twister             technexion     omap3
 omap4_panda                  arm         armv7       panda               ti             omap4
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
new file mode 100644
index 0000000..f588558
--- /dev/null
+++ b/include/configs/mt_ventoux.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#define MACH_TYPE_AM3517_MT_VENTOUX	3832
+#define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
+
+#define	CONFIG_CMD_FPGA
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_AUTO_COMPLETE
+
+#define CONFIG_HOSTNAME mt_ventoux
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT			"mt_ventoux => "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+
+/*
+ * FPGA
+ */
+#ifdef	CONFIG_CMD_FPGA
+#define	CONFIG_FPGA
+#define	CONFIG_FPGA_XILINX
+#define	CONFIG_FPGA_SPARTAN3
+#define	CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define	CONFIG_SYS_FPGA_WAIT	10000
+#define	CONFIG_MAX_FPGA_DEVICES	1
+#define CONFIG_FPGA_DELAY() udelay(1)
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#endif
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
+	"bootcmd=run net_nfs\0"
+
+#endif /* __CONFIG_H */
-- 
1.7.5.4

[U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux

[Igor Grinberg]

Hi Stefano,

Isn't Ilya is author of these?
I would expect you (at least) to put him in Cc, no?

On 12/28/11 18:47, Stefano Babic wrote:
> The mt_ventoux board is a custom board using
> the Technexion TAM3517 module.
> 
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> ---
>  MAINTAINERS                          |    1 +
>  board/teejet/mt_ventoux/Makefile     |   44 ++++
>  board/teejet/mt_ventoux/mt_ventoux.c |  235 +++++++++++++++++++
>  board/teejet/mt_ventoux/mt_ventoux.h |  429 ++++++++++++++++++++++++++++++++++
>  boards.cfg                           |    1 +
>  include/configs/mt_ventoux.h         |   61 +++++
>  6 files changed, 771 insertions(+), 0 deletions(-)
>  create mode 100644 board/teejet/mt_ventoux/Makefile
>  create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
>  create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
>  create mode 100644 include/configs/mt_ventoux.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4e3246d..d680eaf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -558,6 +558,7 @@ Stefano Babic <sbabic@denx.de>
>  
>  	ea20		davinci
>  	flea3		i.MX35
> +	mt_ventoux	omap3
>  	mx35pdk		i.MX35
>  	mx51evk		i.MX51
>  	polaris		xscale/pxa
> diff --git a/board/teejet/mt_ventoux/Makefile b/board/teejet/mt_ventoux/Makefile
> new file mode 100644
> index 0000000..ce20ec7
> --- /dev/null
> +++ b/board/teejet/mt_ventoux/Makefile
> @@ -0,0 +1,44 @@
> +#
> +# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
> +#
> +# Based on ti/evm/Makefile
> +#
> +# This program is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation; either version 2 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc.
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).o
> +
> +COBJS	:= $(BOARD).o
> +
> +SRCS	:= $(COBJS:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS)
> +	$(call cmd_link_o_target, $(OBJS))
> +
> +clean:
> +	rm -f $(OBJS)
> +
> +distclean:	clean
> +	rm -f $(LIB) core *.bak $(obj).depend

Please, remove these...

> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
> new file mode 100644
> index 0000000..dd8e244
> --- /dev/null
> +++ b/board/teejet/mt_ventoux/mt_ventoux.c
> @@ -0,0 +1,235 @@
> +/*
> + * Copyright (C) 2011
> + * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
> + *
> + * Copyright (C) 2009 TechNexion Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc.
> + */
> +
> +#include <common.h>
> +#include <netdev.h>
> +#include <fpga.h>
> +#include <asm/io.h>
> +#include <asm/arch/mem.h>
> +#include <asm/arch/mux.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/omap_gpio.h>
> +#include <asm/arch/mmc_host_def.h>
> +#include <i2c.h>
> +#include <spartan3.h>
> +#include <asm/gpio.h>
> +#include "mt_ventoux.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#if defined(CONFIG_FPGA)

Probably #ifdef would be better or
see the comment in the end of this section...

> +
> +#define FPGA_RESET	62
> +#define FPGA_PROG	116
> +#define FPGA_CCLK	117
> +#define FPGA_DIN	118
> +#define FPGA_INIT	119
> +#define FPGA_DONE	154
> +
> +/* Timing definitions for FPGA */
> +static const u32 gpmc_fpga[] = {
> +	FPGA_GPMC_CONFIG1,
> +	FPGA_GPMC_CONFIG2,
> +	FPGA_GPMC_CONFIG3,
> +	FPGA_GPMC_CONFIG4,
> +	FPGA_GPMC_CONFIG5,
> +	FPGA_GPMC_CONFIG6,
> +};
> +
> +static void fpga_reset(int nassert)
> +{
> +	if (nassert)
> +		gpio_set_value(FPGA_RESET, 0);
> +	else
> +		gpio_set_value(FPGA_RESET, 1);
> +}

Isn't this just:
gpio_set_value(FPGA_RESET, !nassert);

Also, this function is called once, may be just inline it instead?

> +
> +int fpga_pgm_fn(int nassert, int nflush, int cookie)
> +{
> +	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
> +
> +	if (nassert) {
> +		gpio_set_value(FPGA_PROG, 0);
> +		debug("asserted\n");
> +	} else {
> +		gpio_set_value(FPGA_PROG, 1);
> +		debug("deasserted\n");
> +	}
> +
> +	return nassert;
> +}

This function look very similar to the fpga_reset(),
may they can be consolidated in some way?

> +
> +int fpga_init_fn(int cookie)
> +{
> +	u32 val = gpio_get_value(FPGA_INIT);
> +
> +	return (val == 0);
> +}

Isn't this just:
return !gpio_get_value(FPGA_INIT);
?

> +
> +int fpga_done_fn(int cookie)
> +{
> +	u32 val = gpio_get_value(FPGA_DONE);
> +
> +	if (val)
> +		return 1;
> +
> +	return 0;
> +}

return gpio_get_value(FPGA_DONE);
?

> +
> +int fpga_pre_config_fn(int cookie)
> +{
> +

needless empty line?

> +	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
> +
> +	/* Setting GPIOs for programming Mode */
> +	gpio_request(FPGA_RESET, "FPGA_RESET");
> +	gpio_direction_output(FPGA_RESET, 1);
> +	gpio_request(FPGA_PROG, "FPGA_PROG");
> +	gpio_direction_output(FPGA_PROG, 1);
> +	gpio_request(FPGA_CCLK, "FPGA_CCLK");
> +	gpio_direction_output(FPGA_CCLK, 1);
> +	gpio_request(FPGA_DIN, "FPGA_DIN");
> +	gpio_direction_output(FPGA_DIN, 0);
> +	gpio_request(FPGA_INIT, "FPGA_INIT");
> +	gpio_direction_input(FPGA_INIT);
> +	gpio_request(FPGA_DONE, "FPGA_DONE");
> +	gpio_direction_input(FPGA_DONE);
> +
> +	/* Be sure that signal are deasserted */
> +	gpio_set_value(FPGA_RESET, 1);
> +	gpio_set_value(FPGA_PROG, 1);
> +
> +	return 0;
> +}
> +
> +int fpga_post_config_fn(int cookie)
> +{
> +

same here

> +	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
> +
> +	fpga_reset(TRUE);
> +	udelay(100);
> +	fpga_reset(FALSE);
> +
> +	return 0;
> +}
> +
> +/* Write program to the FPGA */
> +int fpga_wr_fn(int nassert_write, int flush, int cookie)
> +{
> +	if (nassert_write)
> +		gpio_set_value(FPGA_DIN, 1);
> +	else
> +		gpio_set_value(FPGA_DIN, 0);
> +
> +	return nassert_write;
> +}

gpio_set_value(FPGA_DIN, nassert_write);
return nassert_write;
?

And also below?

> +
> +int fpga_clk_fn(int assert_clk, int flush, int cookie)
> +{
> +	if (assert_clk)
> +		gpio_set_value(FPGA_CCLK, 1);
> +	else
> +		gpio_set_value(FPGA_CCLK, 0);
> +
> +	return assert_clk;
> +}
> +
> +Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
> +	fpga_pre_config_fn,
> +	fpga_pgm_fn,
> +	fpga_clk_fn,
> +	fpga_init_fn,
> +	fpga_done_fn,
> +	fpga_wr_fn,
> +	fpga_post_config_fn,
> +};
> +
> +Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
> +			(void *)&mt_ventoux_fpga_fns, 0);
> +
> +/* Initialize the FPGA */
> +static void mt_ventoux_init_fpga(void)
> +{
> +	fpga_pre_config_fn(0);
> +
> +	/* Setting CS1 for FPGA access */
> +	enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
> +		FPGA_BASE_ADDR, GPMC_SIZE_128M);
> +
> +	fpga_init();
> +	fpga_add(fpga_xilinx, &fpga);
> +}
> +#endif

I would also recommend to put all this fpga handling code in
a separate file and tweak the Makefile to compile it out if
!CONFIG_FPGA instead of the #ifdefs here.
This can also spare you the need for #ifdef around
mt_ventoux_init_fpga(); below (if you stub it in a .h file).

> +
> +/*
> + * Routine: board_init
> + * Description: Early hardware init.
> + */
> +int board_init(void)
> +{
> +	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
> +
> +	/* boot param addr */
> +	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
> +
> +#if defined(CONFIG_FPGA)
> +	mt_ventoux_init_fpga();
> +#endif
> +
> +	return 0;
> +}

[...]

> diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
> new file mode 100644
> index 0000000..f588558
> --- /dev/null
> +++ b/include/configs/mt_ventoux.h
> @@ -0,0 +1,61 @@
> +/*
> + * Copyright (C) 2011
> + * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
> + *
> + * Copyright (C) 2009 TechNexion Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include "tam3517-common.h"
> +
> +#define MACH_TYPE_AM3517_MT_VENTOUX	3832
> +#define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
> +
> +#define	CONFIG_CMD_FPGA

Can it be space instead of tab after define, like all others?

> +
> +#define CONFIG_BOOTDELAY	10
> +#define CONFIG_BOOTFILE		"uImage"
> +#define CONFIG_AUTO_COMPLETE
> +
> +#define CONFIG_HOSTNAME mt_ventoux
> +
> +/*
> + * Miscellaneous configurable options
> + */
> +#define V_PROMPT			"mt_ventoux => "
> +#define CONFIG_SYS_PROMPT		V_PROMPT
> +
> +/*
> + * FPGA
> + */
> +#ifdef	CONFIG_CMD_FPGA
> +#define	CONFIG_FPGA
> +#define	CONFIG_FPGA_XILINX
> +#define	CONFIG_FPGA_SPARTAN3
> +#define	CONFIG_SYS_FPGA_PROG_FEEDBACK
> +#define	CONFIG_SYS_FPGA_WAIT	10000
> +#define	CONFIG_MAX_FPGA_DEVICES	1

Can it be space after the define, like all others?

> +#define CONFIG_FPGA_DELAY() udelay(1)
> +#define CONFIG_SYS_FPGA_PROG_FEEDBACK
> +#endif
> +
> +#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \

same here

> +	"bootcmd=run net_nfs\0"
> +
> +#endif /* __CONFIG_H */

-- 
Regards,
Igor.

[U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux

[Stefano Babic]

On 29/12/2011 09:42, Igor Grinberg wrote:
> Hi Stefano,
> 

Hi Igor,

> Isn't Ilya is author of these?
> I would expect you (at least) to put him in Cc, no?

No, he's not, but these patches rely on Ilya's patches for AM3517. It is
sure a good idea to add him in CC

>> +distclean:	clean
>> +	rm -f $(LIB) core *.bak $(obj).depend
> 
> Please, remove these...

Sure, bad cut&paste..

>> +#include "mt_ventoux.h"
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +#if defined(CONFIG_FPGA)
> 
> Probably #ifdef would be better or
> see the comment in the end of this section...

ok

>> +#define FPGA_RESET	62
>> +#define FPGA_PROG	116
>> +#define FPGA_CCLK	117
>> +#define FPGA_DIN	118
>> +#define FPGA_INIT	119
>> +#define FPGA_DONE	154
>> +
>> +/* Timing definitions for FPGA */
>> +static const u32 gpmc_fpga[] = {
>> +	FPGA_GPMC_CONFIG1,
>> +	FPGA_GPMC_CONFIG2,
>> +	FPGA_GPMC_CONFIG3,
>> +	FPGA_GPMC_CONFIG4,
>> +	FPGA_GPMC_CONFIG5,
>> +	FPGA_GPMC_CONFIG6,
>> +};
>> +
>> +static void fpga_reset(int nassert)
>> +{
>> +	if (nassert)
>> +		gpio_set_value(FPGA_RESET, 0);
>> +	else
>> +		gpio_set_value(FPGA_RESET, 1);
>> +}
> 
> Isn't this just:
> gpio_set_value(FPGA_RESET, !nassert);

Yes, and it is a cleaner way - got it, I will fix it.

> 
> Also, this function is called once, may be just inline it instead?
> 

Agree.

>> +
>> +int fpga_pgm_fn(int nassert, int nflush, int cookie)
>> +{
>> +	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
>> +
>> +	if (nassert) {
>> +		gpio_set_value(FPGA_PROG, 0);
>> +		debug("asserted\n");
>> +	} else {
>> +		gpio_set_value(FPGA_PROG, 1);
>> +		debug("deasserted\n");
>> +	}
>> +
>> +	return nassert;
>> +}
> 
> This function look very similar to the fpga_reset(),
> may they can be consolidated in some way?

I check it

>> +int fpga_init_fn(int cookie)
>> +{
>> +	u32 val = gpio_get_value(FPGA_INIT);
>> +
>> +	return (val == 0);
>> +}
> 
> Isn't this just:
> return !gpio_get_value(FPGA_INIT);

Right - fixed in V2

>> +int fpga_pre_config_fn(int cookie)
>> +{
>> +
> 
> needless empty line?

Thanks, I drop it

> 
> I would also recommend to put all this fpga handling code in
> a separate file and tweak the Makefile to compile it out if
> !CONFIG_FPGA instead of the #ifdefs here.
> This can also spare you the need for #ifdef around
> mt_ventoux_init_fpga(); below (if you stub it in a .h file).

After checking the hardware again there is no reason to compile without
FPGA support. The board relies on the FPGA itself and U-Boot should
never compiled without a way to load the fpga. For this reason I can
drop completely any #ifdef CONFIG_FPGA.

>> +#ifndef __CONFIG_H
>> +#define __CONFIG_H
>> +
>> +#include "tam3517-common.h"
>> +
>> +#define MACH_TYPE_AM3517_MT_VENTOUX	3832
>> +#define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
>> +
>> +#define	CONFIG_CMD_FPGA
> 
> Can it be space instead of tab after define, like all others?

Sure, I check it in the whole file.

Thanks,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux

[Wolfgang Denk]

Dear Stefano Babic,

In message <1325090823-8051-4-git-send-email-sbabic@denx.de> you wrote:
> The mt_ventoux board is a custom board using
> the Technexion TAM3517 module.
> 
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> ---
>  MAINTAINERS                          |    1 +
>  board/teejet/mt_ventoux/Makefile     |   44 ++++
>  board/teejet/mt_ventoux/mt_ventoux.c |  235 +++++++++++++++++++
>  board/teejet/mt_ventoux/mt_ventoux.h |  429 ++++++++++++++++++++++++++++++++++
>  boards.cfg                           |    1 +
>  include/configs/mt_ventoux.h         |   61 +++++
>  6 files changed, 771 insertions(+), 0 deletions(-)
>  create mode 100644 board/teejet/mt_ventoux/Makefile
>  create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
>  create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
>  create mode 100644 include/configs/mt_ventoux.h

Acked-by: Wolfgang Denk <wd@denx.de>

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
      Bugs are by far the largest and  most successful class of
      entity, with nearly a million known species. In this res-
      pect they outnumber all the other  known  creatures about
      four to one.  -- Professor Snope's Encyclopedia of Animal

[U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux

[Tom Rini]

On Thu, Jan 5, 2012 at 8:21 AM, Wolfgang Denk <wd@denx.de> wrote:
> Dear Stefano Babic,
>
> In message <1325090823-8051-4-git-send-email-sbabic@denx.de> you wrote:
>> The mt_ventoux board is a custom board using
>> the Technexion TAM3517 module.
>>
>> Signed-off-by: Stefano Babic <sbabic@denx.de>
>> ---
>> ?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
>> ?board/teejet/mt_ventoux/Makefile ? ? | ? 44 ++++
>> ?board/teejet/mt_ventoux/mt_ventoux.c | ?235 +++++++++++++++++++
>> ?board/teejet/mt_ventoux/mt_ventoux.h | ?429 ++++++++++++++++++++++++++++++++++
>> ?boards.cfg ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
>> ?include/configs/mt_ventoux.h ? ? ? ? | ? 61 +++++
>> ?6 files changed, 771 insertions(+), 0 deletions(-)
>> ?create mode 100644 board/teejet/mt_ventoux/Makefile
>> ?create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
>> ?create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
>> ?create mode 100644 include/configs/mt_ventoux.h
>
> Acked-by: Wolfgang Denk <wd@denx.de>

And I will apply this to u-boot-ti/master once the FPGA parts hit u-boot-arm.

-- 
Tom

[U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux

[Stefano Babic]

The mt_ventoux board is a custom board using
the Technexion TAM3517 module.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Igor Grinberg <grinberg@compulab.co.il>
---

Changes since V1:

- CONFIG_FPGA must be enabled (S. Babic)
- reworking fpga functions (Igor Grinberg)
- drop clean / distclean from Makefile (Igor Grinberg)
- TAB / Spaces issue (Igor Grinberg)

 MAINTAINERS                          |    1 +
 board/teejet/mt_ventoux/Makefile     |   38 +++
 board/teejet/mt_ventoux/mt_ventoux.c |  210 +++++++++++++++++
 board/teejet/mt_ventoux/mt_ventoux.h |  429 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/mt_ventoux.h         |   58 +++++
 6 files changed, 737 insertions(+), 0 deletions(-)
 create mode 100644 board/teejet/mt_ventoux/Makefile
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
 create mode 100644 include/configs/mt_ventoux.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 4e3246d..d680eaf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -558,6 +558,7 @@ Stefano Babic <sbabic@denx.de>
 
 	ea20		davinci
 	flea3		i.MX35
+	mt_ventoux	omap3
 	mx35pdk		i.MX35
 	mx51evk		i.MX51
 	polaris		xscale/pxa
diff --git a/board/teejet/mt_ventoux/Makefile b/board/teejet/mt_ventoux/Makefile
new file mode 100644
index 0000000..4c8db10
--- /dev/null
+++ b/board/teejet/mt_ventoux/Makefile
@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+#
+# Based on ti/evm/Makefile
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
new file mode 100644
index 0000000..1d8de81
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <fpga.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <i2c.h>
+#include <spartan3.h>
+#include <asm/gpio.h>
+#include "mt_ventoux.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_FPGA
+#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
+#endif
+
+#define FPGA_RESET	62
+#define FPGA_PROG	116
+#define FPGA_CCLK	117
+#define FPGA_DIN	118
+#define FPGA_INIT	119
+#define FPGA_DONE	154
+
+/* Timing definitions for FPGA */
+static const u32 gpmc_fpga[] = {
+	FPGA_GPMC_CONFIG1,
+	FPGA_GPMC_CONFIG2,
+	FPGA_GPMC_CONFIG3,
+	FPGA_GPMC_CONFIG4,
+	FPGA_GPMC_CONFIG5,
+	FPGA_GPMC_CONFIG6,
+};
+
+static inline void fpga_reset(int nassert)
+{
+	gpio_set_value(FPGA_RESET, !nassert);
+}
+
+int fpga_pgm_fn(int nassert, int nflush, int cookie)
+{
+	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
+
+	gpio_set_value(FPGA_PROG, !nassert);
+
+	return nassert;
+}
+
+int fpga_init_fn(int cookie)
+{
+	return !gpio_get_value(FPGA_INIT);
+}
+
+int fpga_done_fn(int cookie)
+{
+	return gpio_get_value(FPGA_DONE);
+}
+
+int fpga_pre_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
+
+	/* Setting GPIOs for programming Mode */
+	gpio_request(FPGA_RESET, "FPGA_RESET");
+	gpio_direction_output(FPGA_RESET, 1);
+	gpio_request(FPGA_PROG, "FPGA_PROG");
+	gpio_direction_output(FPGA_PROG, 1);
+	gpio_request(FPGA_CCLK, "FPGA_CCLK");
+	gpio_direction_output(FPGA_CCLK, 1);
+	gpio_request(FPGA_DIN, "FPGA_DIN");
+	gpio_direction_output(FPGA_DIN, 0);
+	gpio_request(FPGA_INIT, "FPGA_INIT");
+	gpio_direction_input(FPGA_INIT);
+	gpio_request(FPGA_DONE, "FPGA_DONE");
+	gpio_direction_input(FPGA_DONE);
+
+	/* Be sure that signal are deasserted */
+	gpio_set_value(FPGA_RESET, 1);
+	gpio_set_value(FPGA_PROG, 1);
+
+	return 0;
+}
+
+int fpga_post_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
+
+	fpga_reset(TRUE);
+	udelay(100);
+	fpga_reset(FALSE);
+
+	return 0;
+}
+
+/* Write program to the FPGA */
+int fpga_wr_fn(int nassert_write, int flush, int cookie)
+{
+	gpio_set_value(FPGA_DIN, nassert_write);
+
+	return nassert_write;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	gpio_set_value(FPGA_CCLK, assert_clk);
+
+	return assert_clk;
+}
+
+Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_clk_fn,
+	fpga_init_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_post_config_fn,
+};
+
+Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
+			(void *)&mt_ventoux_fpga_fns, 0);
+
+/* Initialize the FPGA */
+static void mt_ventoux_init_fpga(void)
+{
+	fpga_pre_config_fn(0);
+
+	/* Setting CS1 for FPGA access */
+	enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
+		FPGA_BASE_ADDR, GPMC_SIZE_128M);
+
+	fpga_init();
+	fpga_add(fpga_xilinx, &fpga);
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	mt_ventoux_init_fpga();
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_MT_VENTOUX();
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int board_eth_init(bd_t *bis)
+{
+	davinci_emac_initialize();
+	return 0;
+}
+
+#if defined(CONFIG_GENERIC_MMC) && defined(CONFIG_OMAP_HSMMC) && \
+	!defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+	return omap_mmc_init(0);
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
new file mode 100644
index 0000000..34c1ec5
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2011 Stefano Babic <sbabic@denx.de>
+ *
+ * Author: Hardy Weng <hardy.weng@technexion.com>
+ *
+ * Copyright (C) 2010 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef _MT_VENTOUX_H_
+#define _MT_VENTOUX_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"Teejet MT_VENTOUX Board",
+	"NAND",
+};
+
+/* FPGA CS1 configuration */
+#define FPGA_GPMC_CONFIG1	0x00001200
+#define FPGA_GPMC_CONFIG2	0x00111a00
+#define FPGA_GPMC_CONFIG3	0x00010100
+#define FPGA_GPMC_CONFIG4	0x06041a04
+#define FPGA_GPMC_CONFIG5	0x0019101a
+#define FPGA_GPMC_CONFIG6	0x890503c0
+#define FPGA_GPMC_CONFIG7	0x00000860
+
+#define FPGA_BASE_ADDR		0x20000000
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN	- Pull type selection is active
+ * M0	- Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_MT_VENTOUX() \
+	/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
+	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
+	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
+	/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS1),		(IEN | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTD | EN  | M4))/* GPIO 53 */\
+	MUX_VAL(CP(GPMC_NCS3),		(IEN | PTU | EN | M4))	/* GPIO 54 */\
+	MUX_VAL(CP(GPMC_NCS4),		(IEN | PTD | EN | M4)) \
+			/* GPIO 55 : NFS */\
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_NCS6),		(IDIS  | PTD | EN | M3)) /*PWM11*/ \
+	MUX_VAL(CP(GPMC_NCS7),		(IDIS  | PTD | EN | M4)) /*GPIO_58*/ \
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M4)) \
+			/*GPIO_62: FPGA_RESET */ \
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
+	/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
+	/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
+	/* MMC */\
+	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO_126: CardDetect */\
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
+	\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | DIS  | M0)) /*MMC2_CMD*/\
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT0*/\
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT1*/\
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT2*/\
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT3*/\
+	MUX_VAL(CP(MMC2_DAT4),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_138: LCD_ENVD */\
+	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_139: LCD_PON */\
+	/* McBSP */\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_116: FPGA_PROG */ \
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN | PTD | EN | M4)) \
+			/* GPIO_117: FPGA_CCLK */ \
+	MUX_VAL(CP(MCBSP2_DR),		(IEN | PTD | EN | M4)) \
+			/* GPIO_118: FPGA_DIN */ \
+	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_119: FPGA_INIT */ \
+	\
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
+			/* GPIO_140: speaker #mute */\
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
+			/* GPIO_141: Buzz Hi */\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
+	\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_152: Ignition Sense */ \
+	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) \
+			/*GPIO_153: Power Button Sense */ \
+	MUX_VAL(CP(MCBSP4_DX),		(IEN | PTU | DIS | M4)) \
+			/* GPIO_154: FPGA_DONE */ \
+	MUX_VAL(CP(MCBSP4_FSX),		(IEN | PTD | DIS | M4)) \
+			/* GPIO_155: CA8_irq */ \
+	/* UART */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_RTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_149: USB status 2 */\
+	MUX_VAL(CP(UART1_CTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_150: USB status 1 */\
+	\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) \
+			/*GPIO_163 : TS_PENIRQ*/ \
+	MUX_VAL(CP(UART3_RTS_SD),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_164 : MMC */\
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
+	/* I2C */\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	/* McSPI */\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MCSPI1_CS1),		(IEN | PTD | EN | M4)) /*GPIO_175*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IEN | PTD | EN | M4)) /*GPIO_176*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN | PTD | EN | M4)) \
+	\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) \
+	/* CCDC */\
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO95: #Enable Output */\
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO 99: #SOM_PWR_OFF */\
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO_100: #power out */\
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	/* RMII */\
+	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
+	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
+	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
+	/* HECC */\
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
+	/* HSUSB */\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
+	/* HDQ */\
+	MUX_VAL(CP(HDQ_SIO),		(IEN | PTD | EN | M4)) \
+			/* GPIO_170: auto update */\
+	/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
+			/* - GPIO30 */\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4*/\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
+	/* JTAG */\
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU0),		(IDIS  | PTD | EN | M4)) /*GPIO_11*/ \
+	MUX_VAL(CP(JTAG_EMU1),		(IDIS  | PTD | EN | M4)) /*GPIO_31*/ \
+	/* ETK (ES2 onwards) */\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTD | DIS  | M3)) \
+					/* hsusb1_stp */ \
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)) \
+					/* hsusb1_clk */\
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) \
+	/* Die to Die */\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+
+#endif
diff --git a/boards.cfg b/boards.cfg
index 7826e29..7a3088b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -195,6 +195,7 @@ omap3_evm_quick_nand         arm         armv7       evm                 ti
 omap3_sdp3430                arm         armv7       sdp3430             ti             omap3
 devkit8000                   arm         armv7       devkit8000          timll          omap3
 mcx                          arm         armv7       mcx                 htkw           omap3
+mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
 twister                      arm         armv7       twister             technexion     omap3
 omap4_panda                  arm         armv7       panda               ti             omap4
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
new file mode 100644
index 0000000..2034b59
--- /dev/null
+++ b/include/configs/mt_ventoux.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#define MACH_TYPE_AM3517_MT_VENTOUX	3832
+#define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_AUTO_COMPLETE
+
+#define CONFIG_HOSTNAME mt_ventoux
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT			"mt_ventoux => "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+
+/*
+ * FPGA
+ */
+#define CONFIG_CMD_FPGA
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_WAIT	10000
+#define CONFIG_MAX_FPGA_DEVICES	1
+#define CONFIG_FPGA_DELAY() udelay(1)
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
+	"bootcmd=run net_nfs\0"
+
+#endif /* __CONFIG_H */
-- 
1.7.5.4

[U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux

[Tom Rini]

On Wed, Jan 4, 2012 at 2:02 AM, Stefano Babic <sbabic@denx.de> wrote:
> The mt_ventoux board is a custom board using
> the Technexion TAM3517 module.
>
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> CC: Ilya Yanok <yanok@emcraft.com>
> CC: Igor Grinberg <grinberg@compulab.co.il>
[snip]
> +#if defined(CONFIG_GENERIC_MMC) && defined(CONFIG_OMAP_HSMMC) && \
> + ? ? ? !defined(CONFIG_SPL_BUILD)
> +int board_mmc_init(bd_t *bis)
> +{
> + ? ? ? return omap_mmc_init(0);
> +}
> +#endif

CONFIG_OMAP_HSMMC requires CONFIG_GENERIC_MMC, don't need to check for
both, thanks.

-- 
Tom

[U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux

[Stefano Babic]

On 04/01/2012 15:25, Tom Rini wrote:
> On Wed, Jan 4, 2012 at 2:02 AM, Stefano Babic <sbabic@denx.de> wrote:
>> The mt_ventoux board is a custom board using
>> the Technexion TAM3517 module.
>>
>> Signed-off-by: Stefano Babic <sbabic@denx.de>
>> CC: Ilya Yanok <yanok@emcraft.com>
>> CC: Igor Grinberg <grinberg@compulab.co.il>
> [snip]
>> +#if defined(CONFIG_GENERIC_MMC) && defined(CONFIG_OMAP_HSMMC) && \
>> +       !defined(CONFIG_SPL_BUILD)
>> +int board_mmc_init(bd_t *bis)
>> +{
>> +       return omap_mmc_init(0);
>> +}
>> +#endif
> 
> CONFIG_OMAP_HSMMC requires CONFIG_GENERIC_MMC, don't need to check for
> both, thanks.

Right, I fix it.

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH 1/4] fpga: add definition for Xilinx Spartan-6 XC6SLX4

[Wolfgang Denk]

Dear Stefano Babic,

In message <1325090823-8051-1-git-send-email-sbabic@denx.de> you wrote:
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> ---
>  include/spartan3.h |    9 +++++++++
>  1 files changed, 9 insertions(+), 0 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Only in our dreams we are free.  The rest of the time we need  wages.
                                    - Terry Pratchett, _Wyrd Sisters_

[U-Boot] [PATCH V3 4/4] ARM: omap3: Added Teejet mt_ventoux

[Stefano Babic]

The mt_ventoux board is a custom board using
the Technexion TAM3517 module.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Tom Rini <tom.rini@gmail.com>
---

Changes since V2:
- CONFIG_OMAP_HSMMC requires CONFIG_GENERIC_MMC, do not check both (T. Rini)

Changes since V1:

- CONFIG_FPGA must be enabled (S. Babic)
- reworking fpga functions (Igor Grinberg)
- drop clean / distclean from Makefile (Igor Grinberg)
- TAB / Spaces issue (Igor Grinberg)

 MAINTAINERS                          |    1 +
 board/teejet/mt_ventoux/Makefile     |   38 +++
 board/teejet/mt_ventoux/mt_ventoux.c |  210 +++++++++++++++++
 board/teejet/mt_ventoux/mt_ventoux.h |  429 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/mt_ventoux.h         |   58 +++++
 6 files changed, 737 insertions(+), 0 deletions(-)
 create mode 100644 board/teejet/mt_ventoux/Makefile
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
 create mode 100644 include/configs/mt_ventoux.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 4e3246d..d680eaf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -558,6 +558,7 @@ Stefano Babic <sbabic@denx.de>
 
 	ea20		davinci
 	flea3		i.MX35
+	mt_ventoux	omap3
 	mx35pdk		i.MX35
 	mx51evk		i.MX51
 	polaris		xscale/pxa
diff --git a/board/teejet/mt_ventoux/Makefile b/board/teejet/mt_ventoux/Makefile
new file mode 100644
index 0000000..4c8db10
--- /dev/null
+++ b/board/teejet/mt_ventoux/Makefile
@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+#
+# Based on ti/evm/Makefile
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
new file mode 100644
index 0000000..c9b9291
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <fpga.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <i2c.h>
+#include <spartan3.h>
+#include <asm/gpio.h>
+#include "mt_ventoux.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_FPGA
+#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
+#endif
+
+#define FPGA_RESET	62
+#define FPGA_PROG	116
+#define FPGA_CCLK	117
+#define FPGA_DIN	118
+#define FPGA_INIT	119
+#define FPGA_DONE	154
+
+/* Timing definitions for FPGA */
+static const u32 gpmc_fpga[] = {
+	FPGA_GPMC_CONFIG1,
+	FPGA_GPMC_CONFIG2,
+	FPGA_GPMC_CONFIG3,
+	FPGA_GPMC_CONFIG4,
+	FPGA_GPMC_CONFIG5,
+	FPGA_GPMC_CONFIG6,
+};
+
+static inline void fpga_reset(int nassert)
+{
+	gpio_set_value(FPGA_RESET, !nassert);
+}
+
+int fpga_pgm_fn(int nassert, int nflush, int cookie)
+{
+	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
+
+	gpio_set_value(FPGA_PROG, !nassert);
+
+	return nassert;
+}
+
+int fpga_init_fn(int cookie)
+{
+	return !gpio_get_value(FPGA_INIT);
+}
+
+int fpga_done_fn(int cookie)
+{
+	return gpio_get_value(FPGA_DONE);
+}
+
+int fpga_pre_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
+
+	/* Setting GPIOs for programming Mode */
+	gpio_request(FPGA_RESET, "FPGA_RESET");
+	gpio_direction_output(FPGA_RESET, 1);
+	gpio_request(FPGA_PROG, "FPGA_PROG");
+	gpio_direction_output(FPGA_PROG, 1);
+	gpio_request(FPGA_CCLK, "FPGA_CCLK");
+	gpio_direction_output(FPGA_CCLK, 1);
+	gpio_request(FPGA_DIN, "FPGA_DIN");
+	gpio_direction_output(FPGA_DIN, 0);
+	gpio_request(FPGA_INIT, "FPGA_INIT");
+	gpio_direction_input(FPGA_INIT);
+	gpio_request(FPGA_DONE, "FPGA_DONE");
+	gpio_direction_input(FPGA_DONE);
+
+	/* Be sure that signal are deasserted */
+	gpio_set_value(FPGA_RESET, 1);
+	gpio_set_value(FPGA_PROG, 1);
+
+	return 0;
+}
+
+int fpga_post_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
+
+	fpga_reset(TRUE);
+	udelay(100);
+	fpga_reset(FALSE);
+
+	return 0;
+}
+
+/* Write program to the FPGA */
+int fpga_wr_fn(int nassert_write, int flush, int cookie)
+{
+	gpio_set_value(FPGA_DIN, nassert_write);
+
+	return nassert_write;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	gpio_set_value(FPGA_CCLK, assert_clk);
+
+	return assert_clk;
+}
+
+Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_clk_fn,
+	fpga_init_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_post_config_fn,
+};
+
+Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
+			(void *)&mt_ventoux_fpga_fns, 0);
+
+/* Initialize the FPGA */
+static void mt_ventoux_init_fpga(void)
+{
+	fpga_pre_config_fn(0);
+
+	/* Setting CS1 for FPGA access */
+	enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
+		FPGA_BASE_ADDR, GPMC_SIZE_128M);
+
+	fpga_init();
+	fpga_add(fpga_xilinx, &fpga);
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	mt_ventoux_init_fpga();
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_MT_VENTOUX();
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int board_eth_init(bd_t *bis)
+{
+	davinci_emac_initialize();
+	return 0;
+}
+
+#if defined(CONFIG_OMAP_HSMMC) && \
+	!defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+	return omap_mmc_init(0);
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
new file mode 100644
index 0000000..34c1ec5
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2011 Stefano Babic <sbabic@denx.de>
+ *
+ * Author: Hardy Weng <hardy.weng@technexion.com>
+ *
+ * Copyright (C) 2010 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef _MT_VENTOUX_H_
+#define _MT_VENTOUX_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"Teejet MT_VENTOUX Board",
+	"NAND",
+};
+
+/* FPGA CS1 configuration */
+#define FPGA_GPMC_CONFIG1	0x00001200
+#define FPGA_GPMC_CONFIG2	0x00111a00
+#define FPGA_GPMC_CONFIG3	0x00010100
+#define FPGA_GPMC_CONFIG4	0x06041a04
+#define FPGA_GPMC_CONFIG5	0x0019101a
+#define FPGA_GPMC_CONFIG6	0x890503c0
+#define FPGA_GPMC_CONFIG7	0x00000860
+
+#define FPGA_BASE_ADDR		0x20000000
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN	- Pull type selection is active
+ * M0	- Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_MT_VENTOUX() \
+	/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
+	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
+	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
+	/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS1),		(IEN | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTD | EN  | M4))/* GPIO 53 */\
+	MUX_VAL(CP(GPMC_NCS3),		(IEN | PTU | EN | M4))	/* GPIO 54 */\
+	MUX_VAL(CP(GPMC_NCS4),		(IEN | PTD | EN | M4)) \
+			/* GPIO 55 : NFS */\
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_NCS6),		(IDIS  | PTD | EN | M3)) /*PWM11*/ \
+	MUX_VAL(CP(GPMC_NCS7),		(IDIS  | PTD | EN | M4)) /*GPIO_58*/ \
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M4)) \
+			/*GPIO_62: FPGA_RESET */ \
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
+	/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
+	/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
+	/* MMC */\
+	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO_126: CardDetect */\
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
+	\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | DIS  | M0)) /*MMC2_CMD*/\
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT0*/\
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT1*/\
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT2*/\
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT3*/\
+	MUX_VAL(CP(MMC2_DAT4),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_138: LCD_ENVD */\
+	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_139: LCD_PON */\
+	/* McBSP */\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_116: FPGA_PROG */ \
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN | PTD | EN | M4)) \
+			/* GPIO_117: FPGA_CCLK */ \
+	MUX_VAL(CP(MCBSP2_DR),		(IEN | PTD | EN | M4)) \
+			/* GPIO_118: FPGA_DIN */ \
+	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_119: FPGA_INIT */ \
+	\
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
+			/* GPIO_140: speaker #mute */\
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
+			/* GPIO_141: Buzz Hi */\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
+	\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_152: Ignition Sense */ \
+	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) \
+			/*GPIO_153: Power Button Sense */ \
+	MUX_VAL(CP(MCBSP4_DX),		(IEN | PTU | DIS | M4)) \
+			/* GPIO_154: FPGA_DONE */ \
+	MUX_VAL(CP(MCBSP4_FSX),		(IEN | PTD | DIS | M4)) \
+			/* GPIO_155: CA8_irq */ \
+	/* UART */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_RTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_149: USB status 2 */\
+	MUX_VAL(CP(UART1_CTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_150: USB status 1 */\
+	\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) \
+			/*GPIO_163 : TS_PENIRQ*/ \
+	MUX_VAL(CP(UART3_RTS_SD),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_164 : MMC */\
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
+	/* I2C */\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	/* McSPI */\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MCSPI1_CS1),		(IEN | PTD | EN | M4)) /*GPIO_175*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IEN | PTD | EN | M4)) /*GPIO_176*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN | PTD | EN | M4)) \
+	\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) \
+	/* CCDC */\
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO95: #Enable Output */\
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO 99: #SOM_PWR_OFF */\
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO_100: #power out */\
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	/* RMII */\
+	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
+	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
+	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
+	/* HECC */\
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
+	/* HSUSB */\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
+	/* HDQ */\
+	MUX_VAL(CP(HDQ_SIO),		(IEN | PTD | EN | M4)) \
+			/* GPIO_170: auto update */\
+	/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
+			/* - GPIO30 */\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4*/\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
+	/* JTAG */\
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU0),		(IDIS  | PTD | EN | M4)) /*GPIO_11*/ \
+	MUX_VAL(CP(JTAG_EMU1),		(IDIS  | PTD | EN | M4)) /*GPIO_31*/ \
+	/* ETK (ES2 onwards) */\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTD | DIS  | M3)) \
+					/* hsusb1_stp */ \
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)) \
+					/* hsusb1_clk */\
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) \
+	/* Die to Die */\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+
+#endif
diff --git a/boards.cfg b/boards.cfg
index 7826e29..7a3088b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -195,6 +195,7 @@ omap3_evm_quick_nand         arm         armv7       evm                 ti
 omap3_sdp3430                arm         armv7       sdp3430             ti             omap3
 devkit8000                   arm         armv7       devkit8000          timll          omap3
 mcx                          arm         armv7       mcx                 htkw           omap3
+mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
 twister                      arm         armv7       twister             technexion     omap3
 omap4_panda                  arm         armv7       panda               ti             omap4
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
new file mode 100644
index 0000000..2034b59
--- /dev/null
+++ b/include/configs/mt_ventoux.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#define MACH_TYPE_AM3517_MT_VENTOUX	3832
+#define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_AUTO_COMPLETE
+
+#define CONFIG_HOSTNAME mt_ventoux
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT			"mt_ventoux => "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+
+/*
+ * FPGA
+ */
+#define CONFIG_CMD_FPGA
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_WAIT	10000
+#define CONFIG_MAX_FPGA_DEVICES	1
+#define CONFIG_FPGA_DELAY() udelay(1)
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
+	"bootcmd=run net_nfs\0"
+
+#endif /* __CONFIG_H */
-- 
1.7.5.4

[U-Boot] [PATCH V4] ARM: omap3: Added Teejet mt_ventoux

[Stefano Babic]

The mt_ventoux board is a custom board using
the Technexion TAM3517 module.

The patch fixes also the mtdparts variable in the
TAM3517 common configuration file.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Tom Rini <tom.rini@gmail.com>
Cc: Detlev Zundel <dzu@denx.de>
---
Changes since V3:
- rebased on current u-boot-ti
- rebased on EHCI patches and add EHCI support
- fix mtdparts default value in common file

Changes since V2:
- CONFIG_OMAP_HSMMC requires CONFIG_GENERIC_MMC, do not check both (T. Rini)

Changes since V1:

- CONFIG_FPGA must be enabled (S. Babic)
- reworking fpga functions (Igor Grinberg)
- drop clean / distclean from Makefile (Igor Grinberg)
- TAB / Spaces issue (Igor Grinberg)

 MAINTAINERS                          |    1 +
 board/teejet/mt_ventoux/Makefile     |   38 +++
 board/teejet/mt_ventoux/mt_ventoux.c |  242 +++++++++++++++++++
 board/teejet/mt_ventoux/mt_ventoux.h |  429 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/mt_ventoux.h         |   58 +++++
 include/configs/tam3517-common.h     |    4 +-
 7 files changed, 771 insertions(+), 2 deletions(-)
 create mode 100644 board/teejet/mt_ventoux/Makefile
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
 create mode 100644 include/configs/mt_ventoux.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 0a3b39d..a8e56bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -574,6 +574,7 @@ Stefano Babic <sbabic@denx.de>
 
 	ea20		davinci
 	flea3		i.MX35
+	mt_ventoux	omap3
 	mx35pdk		i.MX35
 	mx51evk		i.MX51
 	polaris		xscale/pxa
diff --git a/board/teejet/mt_ventoux/Makefile b/board/teejet/mt_ventoux/Makefile
new file mode 100644
index 0000000..4c8db10
--- /dev/null
+++ b/board/teejet/mt_ventoux/Makefile
@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+#
+# Based on ti/evm/Makefile
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
new file mode 100644
index 0000000..d3b5f06
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -0,0 +1,242 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <fpga.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <i2c.h>
+#include <spartan3.h>
+#include <asm/gpio.h>
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/ehci-omap.h>
+#endif
+#include "mt_ventoux.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_FPGA
+#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
+#endif
+
+#define FPGA_RESET	62
+#define FPGA_PROG	116
+#define FPGA_CCLK	117
+#define FPGA_DIN	118
+#define FPGA_INIT	119
+#define FPGA_DONE	154
+
+/* Timing definitions for FPGA */
+static const u32 gpmc_fpga[] = {
+	FPGA_GPMC_CONFIG1,
+	FPGA_GPMC_CONFIG2,
+	FPGA_GPMC_CONFIG3,
+	FPGA_GPMC_CONFIG4,
+	FPGA_GPMC_CONFIG5,
+	FPGA_GPMC_CONFIG6,
+};
+
+#ifdef CONFIG_USB_EHCI
+static struct omap_usbhs_board_data usbhs_bdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_EHCI_PORT_MODE_PHY,
+};
+
+int ehci_hcd_init(void)
+{
+	int ret;
+
+	ret = omap_ehci_hcd_init(&usbhs_bdata);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+	int ret;
+
+	ret = omap_ehci_hcd_stop();
+	return ret;
+}
+#endif
+
+
+static inline void fpga_reset(int nassert)
+{
+	gpio_set_value(FPGA_RESET, !nassert);
+}
+
+int fpga_pgm_fn(int nassert, int nflush, int cookie)
+{
+	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
+
+	gpio_set_value(FPGA_PROG, !nassert);
+
+	return nassert;
+}
+
+int fpga_init_fn(int cookie)
+{
+	return !gpio_get_value(FPGA_INIT);
+}
+
+int fpga_done_fn(int cookie)
+{
+	return gpio_get_value(FPGA_DONE);
+}
+
+int fpga_pre_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
+
+	/* Setting GPIOs for programming Mode */
+	gpio_request(FPGA_RESET, "FPGA_RESET");
+	gpio_direction_output(FPGA_RESET, 1);
+	gpio_request(FPGA_PROG, "FPGA_PROG");
+	gpio_direction_output(FPGA_PROG, 1);
+	gpio_request(FPGA_CCLK, "FPGA_CCLK");
+	gpio_direction_output(FPGA_CCLK, 1);
+	gpio_request(FPGA_DIN, "FPGA_DIN");
+	gpio_direction_output(FPGA_DIN, 0);
+	gpio_request(FPGA_INIT, "FPGA_INIT");
+	gpio_direction_input(FPGA_INIT);
+	gpio_request(FPGA_DONE, "FPGA_DONE");
+	gpio_direction_input(FPGA_DONE);
+
+	/* Be sure that signal are deasserted */
+	gpio_set_value(FPGA_RESET, 1);
+	gpio_set_value(FPGA_PROG, 1);
+
+	return 0;
+}
+
+int fpga_post_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
+
+	fpga_reset(TRUE);
+	udelay(100);
+	fpga_reset(FALSE);
+
+	return 0;
+}
+
+/* Write program to the FPGA */
+int fpga_wr_fn(int nassert_write, int flush, int cookie)
+{
+	gpio_set_value(FPGA_DIN, nassert_write);
+
+	return nassert_write;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	gpio_set_value(FPGA_CCLK, assert_clk);
+
+	return assert_clk;
+}
+
+Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_clk_fn,
+	fpga_init_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_post_config_fn,
+};
+
+Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
+			(void *)&mt_ventoux_fpga_fns, 0);
+
+/* Initialize the FPGA */
+static void mt_ventoux_init_fpga(void)
+{
+	fpga_pre_config_fn(0);
+
+	/* Setting CS1 for FPGA access */
+	enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
+		FPGA_BASE_ADDR, GPMC_SIZE_128M);
+
+	fpga_init();
+	fpga_add(fpga_xilinx, &fpga);
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	mt_ventoux_init_fpga();
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_MT_VENTOUX();
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int board_eth_init(bd_t *bis)
+{
+	davinci_emac_initialize();
+	return 0;
+}
+
+#if defined(CONFIG_OMAP_HSMMC) && \
+	!defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+	return omap_mmc_init(0);
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
new file mode 100644
index 0000000..34c1ec5
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2011 Stefano Babic <sbabic@denx.de>
+ *
+ * Author: Hardy Weng <hardy.weng@technexion.com>
+ *
+ * Copyright (C) 2010 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef _MT_VENTOUX_H_
+#define _MT_VENTOUX_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"Teejet MT_VENTOUX Board",
+	"NAND",
+};
+
+/* FPGA CS1 configuration */
+#define FPGA_GPMC_CONFIG1	0x00001200
+#define FPGA_GPMC_CONFIG2	0x00111a00
+#define FPGA_GPMC_CONFIG3	0x00010100
+#define FPGA_GPMC_CONFIG4	0x06041a04
+#define FPGA_GPMC_CONFIG5	0x0019101a
+#define FPGA_GPMC_CONFIG6	0x890503c0
+#define FPGA_GPMC_CONFIG7	0x00000860
+
+#define FPGA_BASE_ADDR		0x20000000
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN	- Pull type selection is active
+ * M0	- Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_MT_VENTOUX() \
+	/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
+	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
+	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
+	/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS1),		(IEN | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTD | EN  | M4))/* GPIO 53 */\
+	MUX_VAL(CP(GPMC_NCS3),		(IEN | PTU | EN | M4))	/* GPIO 54 */\
+	MUX_VAL(CP(GPMC_NCS4),		(IEN | PTD | EN | M4)) \
+			/* GPIO 55 : NFS */\
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_NCS6),		(IDIS  | PTD | EN | M3)) /*PWM11*/ \
+	MUX_VAL(CP(GPMC_NCS7),		(IDIS  | PTD | EN | M4)) /*GPIO_58*/ \
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M4)) \
+			/*GPIO_62: FPGA_RESET */ \
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
+	/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
+	/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
+	/* MMC */\
+	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO_126: CardDetect */\
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
+	\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | DIS  | M0)) /*MMC2_CMD*/\
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT0*/\
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT1*/\
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT2*/\
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT3*/\
+	MUX_VAL(CP(MMC2_DAT4),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_138: LCD_ENVD */\
+	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_139: LCD_PON */\
+	/* McBSP */\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_116: FPGA_PROG */ \
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN | PTD | EN | M4)) \
+			/* GPIO_117: FPGA_CCLK */ \
+	MUX_VAL(CP(MCBSP2_DR),		(IEN | PTD | EN | M4)) \
+			/* GPIO_118: FPGA_DIN */ \
+	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_119: FPGA_INIT */ \
+	\
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
+			/* GPIO_140: speaker #mute */\
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
+			/* GPIO_141: Buzz Hi */\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
+	\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_152: Ignition Sense */ \
+	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) \
+			/*GPIO_153: Power Button Sense */ \
+	MUX_VAL(CP(MCBSP4_DX),		(IEN | PTU | DIS | M4)) \
+			/* GPIO_154: FPGA_DONE */ \
+	MUX_VAL(CP(MCBSP4_FSX),		(IEN | PTD | DIS | M4)) \
+			/* GPIO_155: CA8_irq */ \
+	/* UART */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_RTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_149: USB status 2 */\
+	MUX_VAL(CP(UART1_CTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_150: USB status 1 */\
+	\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) \
+			/*GPIO_163 : TS_PENIRQ*/ \
+	MUX_VAL(CP(UART3_RTS_SD),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_164 : MMC */\
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
+	/* I2C */\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	/* McSPI */\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MCSPI1_CS1),		(IEN | PTD | EN | M4)) /*GPIO_175*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IEN | PTD | EN | M4)) /*GPIO_176*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN | PTD | EN | M4)) \
+	\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) \
+	/* CCDC */\
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO95: #Enable Output */\
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO 99: #SOM_PWR_OFF */\
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO_100: #power out */\
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	/* RMII */\
+	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
+	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
+	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
+	/* HECC */\
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
+	/* HSUSB */\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
+	/* HDQ */\
+	MUX_VAL(CP(HDQ_SIO),		(IEN | PTD | EN | M4)) \
+			/* GPIO_170: auto update */\
+	/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
+			/* - GPIO30 */\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4*/\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
+	/* JTAG */\
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU0),		(IDIS  | PTD | EN | M4)) /*GPIO_11*/ \
+	MUX_VAL(CP(JTAG_EMU1),		(IDIS  | PTD | EN | M4)) /*GPIO_31*/ \
+	/* ETK (ES2 onwards) */\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTD | DIS  | M3)) \
+					/* hsusb1_stp */ \
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)) \
+					/* hsusb1_clk */\
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) \
+	/* Die to Die */\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+
+#endif
diff --git a/boards.cfg b/boards.cfg
index 32a32f5..1f264b1 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -202,6 +202,7 @@ dig297                       arm         armv7       dig297              comelit
 igep0020                     arm         armv7       igep0020            isee           omap3
 igep0030                     arm         armv7       igep0030            isee           omap3
 am3517_evm                   arm         armv7       am3517evm           logicpd        omap3
+mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
 omap3_zoom1                  arm         armv7       zoom1               logicpd        omap3
 omap3_zoom2                  arm         armv7       zoom2               logicpd        omap3
 omap3_logic                  arm         armv7       omap3som            logicpd        omap3
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
new file mode 100644
index 0000000..2034b59
--- /dev/null
+++ b/include/configs/mt_ventoux.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#define MACH_TYPE_AM3517_MT_VENTOUX	3832
+#define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_AUTO_COMPLETE
+
+#define CONFIG_HOSTNAME mt_ventoux
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT			"mt_ventoux => "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+
+/*
+ * FPGA
+ */
+#define CONFIG_CMD_FPGA
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_WAIT	10000
+#define CONFIG_MAX_FPGA_DEVICES	1
+#define CONFIG_FPGA_DELAY() udelay(1)
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
+	"bootcmd=run net_nfs\0"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 13eeadb..254968f 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -303,8 +303,8 @@
 /* Setup MTD for NAND on the SOM */
 #define MTDIDS_DEFAULT		"nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:512k(MLO)," \
-				"512k(u-boot),128k(env1)," \
-				"128k(env2),6m(kernel),-(rootfs)"
+				"1m(u-boot),256k(env1)," \
+				"256k(env2),6m(kernel),-(rootfs)"
 
 #define xstr(s)	str(s)
 #define str(s)	#s
-- 
1.7.5.4

[U-Boot] [PATCH V5] ARM: omap3: Added Teejet mt_ventoux

[Stefano Babic]

The mt_ventoux board is a custom board using
the Technexion TAM3517 module.

The patch fixes also the mtdparts variable in the
TAM3517 common configuration file.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Tom Rini <tom.rini@gmail.com>
Cc: Detlev Zundel <dzu@denx.de>
---
Changes since V4:
- applied comments already sent for the twister board

Changes since V3:
- rebased on current u-boot-ti
- rebased on EHCI patches and add EHCI support
- fix mtdparts default value in common file

Changes since V2:
- CONFIG_OMAP_HSMMC requires CONFIG_GENERIC_MMC, do not check both (T. Rini)

Changes since V1:

- CONFIG_FPGA must be enabled (S. Babic)
- reworking fpga functions (Igor Grinberg)
- drop clean / distclean from Makefile (Igor Grinberg)
- TAB / Spaces issue (Igor Grinberg)

 MAINTAINERS                          |    1 +
 board/teejet/mt_ventoux/Makefile     |   38 +++
 board/teejet/mt_ventoux/mt_ventoux.c |  233 ++++++++++++++++++
 board/teejet/mt_ventoux/mt_ventoux.h |  429 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/mt_ventoux.h         |   58 +++++
 include/configs/tam3517-common.h     |    4 +-
 7 files changed, 762 insertions(+), 2 deletions(-)
 create mode 100644 board/teejet/mt_ventoux/Makefile
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
 create mode 100644 include/configs/mt_ventoux.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 0a3b39d..a8e56bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -574,6 +574,7 @@ Stefano Babic <sbabic@denx.de>
 
 	ea20		davinci
 	flea3		i.MX35
+	mt_ventoux	omap3
 	mx35pdk		i.MX35
 	mx51evk		i.MX51
 	polaris		xscale/pxa
diff --git a/board/teejet/mt_ventoux/Makefile b/board/teejet/mt_ventoux/Makefile
new file mode 100644
index 0000000..4c8db10
--- /dev/null
+++ b/board/teejet/mt_ventoux/Makefile
@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+#
+# Based on ti/evm/Makefile
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
new file mode 100644
index 0000000..c5eb42c
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <fpga.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <i2c.h>
+#include <spartan3.h>
+#include <asm/gpio.h>
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/ehci-omap.h>
+#endif
+#include "mt_ventoux.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_FPGA
+#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
+#endif
+
+#define FPGA_RESET	62
+#define FPGA_PROG	116
+#define FPGA_CCLK	117
+#define FPGA_DIN	118
+#define FPGA_INIT	119
+#define FPGA_DONE	154
+
+/* Timing definitions for FPGA */
+static const u32 gpmc_fpga[] = {
+	FPGA_GPMC_CONFIG1,
+	FPGA_GPMC_CONFIG2,
+	FPGA_GPMC_CONFIG3,
+	FPGA_GPMC_CONFIG4,
+	FPGA_GPMC_CONFIG5,
+	FPGA_GPMC_CONFIG6,
+};
+
+#ifdef CONFIG_USB_EHCI
+static struct omap_usbhs_board_data usbhs_bdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+};
+
+int ehci_hcd_init(void)
+{
+	return omap_ehci_hcd_init(&usbhs_bdata);
+}
+
+int ehci_hcd_stop(void)
+{
+	return omap_ehci_hcd_stop();
+}
+#endif
+
+
+static inline void fpga_reset(int nassert)
+{
+	gpio_set_value(FPGA_RESET, !nassert);
+}
+
+int fpga_pgm_fn(int nassert, int nflush, int cookie)
+{
+	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
+
+	gpio_set_value(FPGA_PROG, !nassert);
+
+	return nassert;
+}
+
+int fpga_init_fn(int cookie)
+{
+	return !gpio_get_value(FPGA_INIT);
+}
+
+int fpga_done_fn(int cookie)
+{
+	return gpio_get_value(FPGA_DONE);
+}
+
+int fpga_pre_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
+
+	/* Setting GPIOs for programming Mode */
+	gpio_request(FPGA_RESET, "FPGA_RESET");
+	gpio_direction_output(FPGA_RESET, 1);
+	gpio_request(FPGA_PROG, "FPGA_PROG");
+	gpio_direction_output(FPGA_PROG, 1);
+	gpio_request(FPGA_CCLK, "FPGA_CCLK");
+	gpio_direction_output(FPGA_CCLK, 1);
+	gpio_request(FPGA_DIN, "FPGA_DIN");
+	gpio_direction_output(FPGA_DIN, 0);
+	gpio_request(FPGA_INIT, "FPGA_INIT");
+	gpio_direction_input(FPGA_INIT);
+	gpio_request(FPGA_DONE, "FPGA_DONE");
+	gpio_direction_input(FPGA_DONE);
+
+	/* Be sure that signal are deasserted */
+	gpio_set_value(FPGA_RESET, 1);
+	gpio_set_value(FPGA_PROG, 1);
+
+	return 0;
+}
+
+int fpga_post_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
+
+	fpga_reset(TRUE);
+	udelay(100);
+	fpga_reset(FALSE);
+
+	return 0;
+}
+
+/* Write program to the FPGA */
+int fpga_wr_fn(int nassert_write, int flush, int cookie)
+{
+	gpio_set_value(FPGA_DIN, nassert_write);
+
+	return nassert_write;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	gpio_set_value(FPGA_CCLK, assert_clk);
+
+	return assert_clk;
+}
+
+Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_clk_fn,
+	fpga_init_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_post_config_fn,
+};
+
+Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
+			(void *)&mt_ventoux_fpga_fns, 0);
+
+/* Initialize the FPGA */
+static void mt_ventoux_init_fpga(void)
+{
+	fpga_pre_config_fn(0);
+
+	/* Setting CS1 for FPGA access */
+	enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
+		FPGA_BASE_ADDR, GPMC_SIZE_128M);
+
+	fpga_init();
+	fpga_add(fpga_xilinx, &fpga);
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	mt_ventoux_init_fpga();
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_MT_VENTOUX();
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int board_eth_init(bd_t *bis)
+{
+	davinci_emac_initialize();
+	return 0;
+}
+
+#if defined(CONFIG_OMAP_HSMMC) && \
+	!defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+	return omap_mmc_init(0);
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
new file mode 100644
index 0000000..34c1ec5
--- /dev/null
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2011 Stefano Babic <sbabic@denx.de>
+ *
+ * Author: Hardy Weng <hardy.weng@technexion.com>
+ *
+ * Copyright (C) 2010 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef _MT_VENTOUX_H_
+#define _MT_VENTOUX_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"Teejet MT_VENTOUX Board",
+	"NAND",
+};
+
+/* FPGA CS1 configuration */
+#define FPGA_GPMC_CONFIG1	0x00001200
+#define FPGA_GPMC_CONFIG2	0x00111a00
+#define FPGA_GPMC_CONFIG3	0x00010100
+#define FPGA_GPMC_CONFIG4	0x06041a04
+#define FPGA_GPMC_CONFIG5	0x0019101a
+#define FPGA_GPMC_CONFIG6	0x890503c0
+#define FPGA_GPMC_CONFIG7	0x00000860
+
+#define FPGA_BASE_ADDR		0x20000000
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN	- Pull type selection is active
+ * M0	- Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_MT_VENTOUX() \
+	/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
+	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
+	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
+	/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS1),		(IEN | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTD | EN  | M4))/* GPIO 53 */\
+	MUX_VAL(CP(GPMC_NCS3),		(IEN | PTU | EN | M4))	/* GPIO 54 */\
+	MUX_VAL(CP(GPMC_NCS4),		(IEN | PTD | EN | M4)) \
+			/* GPIO 55 : NFS */\
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_NCS6),		(IDIS  | PTD | EN | M3)) /*PWM11*/ \
+	MUX_VAL(CP(GPMC_NCS7),		(IDIS  | PTD | EN | M4)) /*GPIO_58*/ \
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M4)) \
+			/*GPIO_62: FPGA_RESET */ \
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
+	/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
+	/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
+	/* MMC */\
+	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO_126: CardDetect */\
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
+	\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | DIS  | M0)) /*MMC2_CMD*/\
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT0*/\
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT1*/\
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT2*/\
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT3*/\
+	MUX_VAL(CP(MMC2_DAT4),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_138: LCD_ENVD */\
+	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
+			/* GPIO_139: LCD_PON */\
+	/* McBSP */\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_116: FPGA_PROG */ \
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN | PTD | EN | M4)) \
+			/* GPIO_117: FPGA_CCLK */ \
+	MUX_VAL(CP(MCBSP2_DR),		(IEN | PTD | EN | M4)) \
+			/* GPIO_118: FPGA_DIN */ \
+	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
+			/* GPIO_119: FPGA_INIT */ \
+	\
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
+			/* GPIO_140: speaker #mute */\
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
+			/* GPIO_141: Buzz Hi */\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
+	\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_152: Ignition Sense */ \
+	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) \
+			/*GPIO_153: Power Button Sense */ \
+	MUX_VAL(CP(MCBSP4_DX),		(IEN | PTU | DIS | M4)) \
+			/* GPIO_154: FPGA_DONE */ \
+	MUX_VAL(CP(MCBSP4_FSX),		(IEN | PTD | DIS | M4)) \
+			/* GPIO_155: CA8_irq */ \
+	/* UART */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_RTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_149: USB status 2 */\
+	MUX_VAL(CP(UART1_CTS),		(IEN | PTU | EN | M4)) \
+			/* GPIO_150: USB status 1 */\
+	\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) \
+			/*GPIO_163 : TS_PENIRQ*/ \
+	MUX_VAL(CP(UART3_RTS_SD),	(IEN | PTD | DIS | M4)) \
+			/*GPIO_164 : MMC */\
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
+	/* I2C */\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	/* McSPI */\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MCSPI1_CS1),		(IEN | PTD | EN | M4)) /*GPIO_175*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IEN | PTD | EN | M4)) /*GPIO_176*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN | PTD | EN | M4)) \
+	\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) \
+	/* CCDC */\
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO95: #Enable Output */\
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO 99: #SOM_PWR_OFF */\
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO_100: #power out */\
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	/* RMII */\
+	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
+	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
+	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
+	/* HECC */\
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
+	/* HSUSB */\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
+	/* HDQ */\
+	MUX_VAL(CP(HDQ_SIO),		(IEN | PTD | EN | M4)) \
+			/* GPIO_170: auto update */\
+	/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
+			/* - GPIO30 */\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4*/\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
+	/* JTAG */\
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU0),		(IDIS  | PTD | EN | M4)) /*GPIO_11*/ \
+	MUX_VAL(CP(JTAG_EMU1),		(IDIS  | PTD | EN | M4)) /*GPIO_31*/ \
+	/* ETK (ES2 onwards) */\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTD | DIS  | M3)) \
+					/* hsusb1_stp */ \
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)) \
+					/* hsusb1_clk */\
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) \
+	/* Die to Die */\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+
+#endif
diff --git a/boards.cfg b/boards.cfg
index 32a32f5..1f264b1 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -202,6 +202,7 @@ dig297                       arm         armv7       dig297              comelit
 igep0020                     arm         armv7       igep0020            isee           omap3
 igep0030                     arm         armv7       igep0030            isee           omap3
 am3517_evm                   arm         armv7       am3517evm           logicpd        omap3
+mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
 omap3_zoom1                  arm         armv7       zoom1               logicpd        omap3
 omap3_zoom2                  arm         armv7       zoom2               logicpd        omap3
 omap3_logic                  arm         armv7       omap3som            logicpd        omap3
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
new file mode 100644
index 0000000..2034b59
--- /dev/null
+++ b/include/configs/mt_ventoux.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#define MACH_TYPE_AM3517_MT_VENTOUX	3832
+#define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_AUTO_COMPLETE
+
+#define CONFIG_HOSTNAME mt_ventoux
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT			"mt_ventoux => "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+
+/*
+ * FPGA
+ */
+#define CONFIG_CMD_FPGA
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_WAIT	10000
+#define CONFIG_MAX_FPGA_DEVICES	1
+#define CONFIG_FPGA_DELAY() udelay(1)
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
+	"bootcmd=run net_nfs\0"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 13eeadb..254968f 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -303,8 +303,8 @@
 /* Setup MTD for NAND on the SOM */
 #define MTDIDS_DEFAULT		"nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:512k(MLO)," \
-				"512k(u-boot),128k(env1)," \
-				"128k(env2),6m(kernel),-(rootfs)"
+				"1m(u-boot),256k(env1)," \
+				"256k(env2),6m(kernel),-(rootfs)"
 
 #define xstr(s)	str(s)
 #define str(s)	#s
-- 
1.7.5.4

[U-Boot] [PATCH V5] ARM: omap3: Added Teejet mt_ventoux

[Igor Grinberg]

On 02/08/12 11:29, Stefano Babic wrote:
> The mt_ventoux board is a custom board using
> the Technexion TAM3517 module.
> 
> The patch fixes also the mtdparts variable in the
> TAM3517 common configuration file.
> 
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> CC: Ilya Yanok <yanok@emcraft.com>
> CC: Igor Grinberg <grinberg@compulab.co.il>
> CC: Tom Rini <tom.rini@gmail.com>
> Cc: Detlev Zundel <dzu@denx.de>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>

> ---
> Changes since V4:
> - applied comments already sent for the twister board
> 
> Changes since V3:
> - rebased on current u-boot-ti
> - rebased on EHCI patches and add EHCI support
> - fix mtdparts default value in common file
> 
> Changes since V2:
> - CONFIG_OMAP_HSMMC requires CONFIG_GENERIC_MMC, do not check both (T. Rini)
> 
> Changes since V1:
> 
> - CONFIG_FPGA must be enabled (S. Babic)
> - reworking fpga functions (Igor Grinberg)
> - drop clean / distclean from Makefile (Igor Grinberg)
> - TAB / Spaces issue (Igor Grinberg)
> 
>  MAINTAINERS                          |    1 +
>  board/teejet/mt_ventoux/Makefile     |   38 +++
>  board/teejet/mt_ventoux/mt_ventoux.c |  233 ++++++++++++++++++
>  board/teejet/mt_ventoux/mt_ventoux.h |  429 ++++++++++++++++++++++++++++++++++
>  boards.cfg                           |    1 +
>  include/configs/mt_ventoux.h         |   58 +++++
>  include/configs/tam3517-common.h     |    4 +-
>  7 files changed, 762 insertions(+), 2 deletions(-)
>  create mode 100644 board/teejet/mt_ventoux/Makefile
>  create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
>  create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
>  create mode 100644 include/configs/mt_ventoux.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0a3b39d..a8e56bb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -574,6 +574,7 @@ Stefano Babic <sbabic@denx.de>
>  
>  	ea20		davinci
>  	flea3		i.MX35
> +	mt_ventoux	omap3
>  	mx35pdk		i.MX35
>  	mx51evk		i.MX51
>  	polaris		xscale/pxa
> diff --git a/board/teejet/mt_ventoux/Makefile b/board/teejet/mt_ventoux/Makefile
> new file mode 100644
> index 0000000..4c8db10
> --- /dev/null
> +++ b/board/teejet/mt_ventoux/Makefile
> @@ -0,0 +1,38 @@
> +#
> +# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
> +#
> +# Based on ti/evm/Makefile
> +#
> +# This program is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation; either version 2 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc.
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).o
> +
> +COBJS	:= $(BOARD).o
> +
> +SRCS	:= $(COBJS:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS)
> +	$(call cmd_link_o_target, $(OBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
> new file mode 100644
> index 0000000..c5eb42c
> --- /dev/null
> +++ b/board/teejet/mt_ventoux/mt_ventoux.c
> @@ -0,0 +1,233 @@
> +/*
> + * Copyright (C) 2011
> + * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
> + *
> + * Copyright (C) 2009 TechNexion Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc.
> + */
> +
> +#include <common.h>
> +#include <netdev.h>
> +#include <fpga.h>
> +#include <asm/io.h>
> +#include <asm/arch/mem.h>
> +#include <asm/arch/mux.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/omap_gpio.h>
> +#include <asm/arch/mmc_host_def.h>
> +#include <i2c.h>
> +#include <spartan3.h>
> +#include <asm/gpio.h>
> +#ifdef CONFIG_USB_EHCI
> +#include <usb.h>
> +#include <asm/ehci-omap.h>
> +#endif
> +#include "mt_ventoux.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#ifndef CONFIG_FPGA
> +#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
> +#endif
> +
> +#define FPGA_RESET	62
> +#define FPGA_PROG	116
> +#define FPGA_CCLK	117
> +#define FPGA_DIN	118
> +#define FPGA_INIT	119
> +#define FPGA_DONE	154
> +
> +/* Timing definitions for FPGA */
> +static const u32 gpmc_fpga[] = {
> +	FPGA_GPMC_CONFIG1,
> +	FPGA_GPMC_CONFIG2,
> +	FPGA_GPMC_CONFIG3,
> +	FPGA_GPMC_CONFIG4,
> +	FPGA_GPMC_CONFIG5,
> +	FPGA_GPMC_CONFIG6,
> +};
> +
> +#ifdef CONFIG_USB_EHCI
> +static struct omap_usbhs_board_data usbhs_bdata = {
> +	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
> +	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
> +	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
> +};
> +
> +int ehci_hcd_init(void)
> +{
> +	return omap_ehci_hcd_init(&usbhs_bdata);
> +}
> +
> +int ehci_hcd_stop(void)
> +{
> +	return omap_ehci_hcd_stop();
> +}
> +#endif
> +
> +
> +static inline void fpga_reset(int nassert)
> +{
> +	gpio_set_value(FPGA_RESET, !nassert);
> +}
> +
> +int fpga_pgm_fn(int nassert, int nflush, int cookie)
> +{
> +	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
> +
> +	gpio_set_value(FPGA_PROG, !nassert);
> +
> +	return nassert;
> +}
> +
> +int fpga_init_fn(int cookie)
> +{
> +	return !gpio_get_value(FPGA_INIT);
> +}
> +
> +int fpga_done_fn(int cookie)
> +{
> +	return gpio_get_value(FPGA_DONE);
> +}
> +
> +int fpga_pre_config_fn(int cookie)
> +{
> +	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
> +
> +	/* Setting GPIOs for programming Mode */
> +	gpio_request(FPGA_RESET, "FPGA_RESET");
> +	gpio_direction_output(FPGA_RESET, 1);
> +	gpio_request(FPGA_PROG, "FPGA_PROG");
> +	gpio_direction_output(FPGA_PROG, 1);
> +	gpio_request(FPGA_CCLK, "FPGA_CCLK");
> +	gpio_direction_output(FPGA_CCLK, 1);
> +	gpio_request(FPGA_DIN, "FPGA_DIN");
> +	gpio_direction_output(FPGA_DIN, 0);
> +	gpio_request(FPGA_INIT, "FPGA_INIT");
> +	gpio_direction_input(FPGA_INIT);
> +	gpio_request(FPGA_DONE, "FPGA_DONE");
> +	gpio_direction_input(FPGA_DONE);
> +
> +	/* Be sure that signal are deasserted */
> +	gpio_set_value(FPGA_RESET, 1);
> +	gpio_set_value(FPGA_PROG, 1);
> +
> +	return 0;
> +}
> +
> +int fpga_post_config_fn(int cookie)
> +{
> +	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
> +
> +	fpga_reset(TRUE);
> +	udelay(100);
> +	fpga_reset(FALSE);
> +
> +	return 0;
> +}
> +
> +/* Write program to the FPGA */
> +int fpga_wr_fn(int nassert_write, int flush, int cookie)
> +{
> +	gpio_set_value(FPGA_DIN, nassert_write);
> +
> +	return nassert_write;
> +}
> +
> +int fpga_clk_fn(int assert_clk, int flush, int cookie)
> +{
> +	gpio_set_value(FPGA_CCLK, assert_clk);
> +
> +	return assert_clk;
> +}
> +
> +Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
> +	fpga_pre_config_fn,
> +	fpga_pgm_fn,
> +	fpga_clk_fn,
> +	fpga_init_fn,
> +	fpga_done_fn,
> +	fpga_wr_fn,
> +	fpga_post_config_fn,
> +};
> +
> +Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
> +			(void *)&mt_ventoux_fpga_fns, 0);
> +
> +/* Initialize the FPGA */
> +static void mt_ventoux_init_fpga(void)
> +{
> +	fpga_pre_config_fn(0);
> +
> +	/* Setting CS1 for FPGA access */
> +	enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
> +		FPGA_BASE_ADDR, GPMC_SIZE_128M);
> +
> +	fpga_init();
> +	fpga_add(fpga_xilinx, &fpga);
> +}
> +
> +/*
> + * Routine: board_init
> + * Description: Early hardware init.
> + */
> +int board_init(void)
> +{
> +	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
> +
> +	/* boot param addr */
> +	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
> +
> +	mt_ventoux_init_fpga();
> +
> +	return 0;
> +}
> +
> +int misc_init_r(void)
> +{
> +	dieid_num_r();
> +
> +	return 0;
> +}
> +
> +/*
> + * Routine: set_muxconf_regs
> + * Description: Setting up the configuration Mux registers specific to the
> + *		hardware. Many pins need to be moved from protect to primary
> + *		mode.
> + */
> +void set_muxconf_regs(void)
> +{
> +	MUX_MT_VENTOUX();
> +}
> +
> +/*
> + * Initializes on-chip ethernet controllers.
> + * to override, implement board_eth_init()
> + */
> +int board_eth_init(bd_t *bis)
> +{
> +	davinci_emac_initialize();
> +	return 0;
> +}
> +
> +#if defined(CONFIG_OMAP_HSMMC) && \
> +	!defined(CONFIG_SPL_BUILD)
> +int board_mmc_init(bd_t *bis)
> +{
> +	return omap_mmc_init(0);
> +}
> +#endif
> diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
> new file mode 100644
> index 0000000..34c1ec5
> --- /dev/null
> +++ b/board/teejet/mt_ventoux/mt_ventoux.h
> @@ -0,0 +1,429 @@
> +/*
> + * Copyright (C) 2011 Stefano Babic <sbabic@denx.de>
> + *
> + * Author: Hardy Weng <hardy.weng@technexion.com>
> + *
> + * Copyright (C) 2010 TechNexion Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc.
> + */
> +
> +#ifndef _MT_VENTOUX_H_
> +#define _MT_VENTOUX_H_
> +
> +const omap3_sysinfo sysinfo = {
> +	DDR_DISCRETE,
> +	"Teejet MT_VENTOUX Board",
> +	"NAND",
> +};
> +
> +/* FPGA CS1 configuration */
> +#define FPGA_GPMC_CONFIG1	0x00001200
> +#define FPGA_GPMC_CONFIG2	0x00111a00
> +#define FPGA_GPMC_CONFIG3	0x00010100
> +#define FPGA_GPMC_CONFIG4	0x06041a04
> +#define FPGA_GPMC_CONFIG5	0x0019101a
> +#define FPGA_GPMC_CONFIG6	0x890503c0
> +#define FPGA_GPMC_CONFIG7	0x00000860
> +
> +#define FPGA_BASE_ADDR		0x20000000
> +
> +/*
> + * IEN  - Input Enable
> + * IDIS - Input Disable
> + * PTD  - Pull type Down
> + * PTU  - Pull type Up
> + * DIS  - Pull type selection is inactive
> + * EN	- Pull type selection is active
> + * M0	- Mode 0
> + * The commented string gives the final mux configuration for that pin
> + */
> +#define MUX_MT_VENTOUX() \
> +	/* SDRC */\
> +	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
> +	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
> +	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
> +	/* GPMC */\
> +	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_NCS1),		(IEN | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTD | EN  | M4))/* GPIO 53 */\
> +	MUX_VAL(CP(GPMC_NCS3),		(IEN | PTU | EN | M4))	/* GPIO 54 */\
> +	MUX_VAL(CP(GPMC_NCS4),		(IEN | PTD | EN | M4)) \
> +			/* GPIO 55 : NFS */\
> +	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M4)) \
> +	MUX_VAL(CP(GPMC_NCS6),		(IDIS  | PTD | EN | M3)) /*PWM11*/ \
> +	MUX_VAL(CP(GPMC_NCS7),		(IDIS  | PTD | EN | M4)) /*GPIO_58*/ \
> +	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M4)) \
> +			/*GPIO_62: FPGA_RESET */ \
> +	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M4)) \
> +	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
> +	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
> +	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
> +	/* DSS */\
> +	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
> +	/* CAMERA */\
> +	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
> +	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
> +	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
> +	/* MMC */\
> +	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
> +	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
> +	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
> +	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
> +	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
> +	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
> +			/* GPIO_126: CardDetect */\
> +	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
> +	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
> +	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
> +	\
> +	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
> +	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | DIS  | M0)) /*MMC2_CMD*/\
> +	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT0*/\
> +	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT1*/\
> +	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT2*/\
> +	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT3*/\
> +	MUX_VAL(CP(MMC2_DAT4),		(IDIS  | PTU | EN  | M4)) \
> +	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
> +	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
> +			/* GPIO_138: LCD_ENVD */\
> +	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
> +			/* GPIO_139: LCD_PON */\
> +	/* McBSP */\
> +	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
> +	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
> +	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
> +	\
> +	MUX_VAL(CP(MCBSP2_FSX),		(IEN | PTD | EN | M4)) \
> +			/* GPIO_116: FPGA_PROG */ \
> +	MUX_VAL(CP(MCBSP2_CLKX),	(IEN | PTD | EN | M4)) \
> +			/* GPIO_117: FPGA_CCLK */ \
> +	MUX_VAL(CP(MCBSP2_DR),		(IEN | PTD | EN | M4)) \
> +			/* GPIO_118: FPGA_DIN */ \
> +	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
> +			/* GPIO_119: FPGA_INIT */ \
> +	\
> +	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
> +			/* GPIO_140: speaker #mute */\
> +	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
> +			/* GPIO_141: Buzz Hi */\
> +	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
> +	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
> +	\
> +	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) \
> +			/*GPIO_152: Ignition Sense */ \
> +	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) \
> +			/*GPIO_153: Power Button Sense */ \
> +	MUX_VAL(CP(MCBSP4_DX),		(IEN | PTU | DIS | M4)) \
> +			/* GPIO_154: FPGA_DONE */ \
> +	MUX_VAL(CP(MCBSP4_FSX),		(IEN | PTD | DIS | M4)) \
> +			/* GPIO_155: CA8_irq */ \
> +	/* UART */\
> +	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(UART1_RTS),		(IEN | PTU | EN | M4)) \
> +			/* GPIO_149: USB status 2 */\
> +	MUX_VAL(CP(UART1_CTS),		(IEN | PTU | EN | M4)) \
> +			/* GPIO_150: USB status 1 */\
> +	\
> +	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
> +	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
> +	\
> +	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) \
> +			/*GPIO_163 : TS_PENIRQ*/ \
> +	MUX_VAL(CP(UART3_RTS_SD),	(IEN | PTD | DIS | M4)) \
> +			/*GPIO_164 : MMC */\
> +	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
> +	/* I2C */\
> +	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
> +	/* McSPI */\
> +	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(MCSPI1_CS1),		(IEN | PTD | EN | M4)) /*GPIO_175*/\
> +	MUX_VAL(CP(MCSPI1_CS2),		(IEN | PTD | EN | M4)) /*GPIO_176*/\
> +	MUX_VAL(CP(MCSPI1_CS3),		(IEN | PTD | EN | M4)) \
> +	\
> +	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
> +	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) \
> +	/* CCDC */\
> +	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M4)) \
> +			/* GPIO95: #Enable Output */\
> +	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M4)) \
> +			/* GPIO 99: #SOM_PWR_OFF */\
> +	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M4)) \
> +			/* GPIO_100: #power out */\
> +	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
> +	/* RMII */\
> +	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
> +	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
> +	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
> +	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
> +	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
> +	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
> +	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
> +	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
> +	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
> +	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
> +	/* HECC */\
> +	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
> +	/* HSUSB */\
> +	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
> +	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTU | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
> +	/* HDQ */\
> +	MUX_VAL(CP(HDQ_SIO),		(IEN | PTD | EN | M4)) \
> +			/* GPIO_170: auto update */\
> +	/* Control and debug */\
> +	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
> +			/* - GPIO30 */\
> +	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
> +	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3 */\
> +	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4*/\
> +	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
> +	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
> +	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
> +	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
> +	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
> +	\
> +	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
> +	/* JTAG */\
> +	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(JTAG_EMU0),		(IDIS  | PTD | EN | M4)) /*GPIO_11*/ \
> +	MUX_VAL(CP(JTAG_EMU1),		(IDIS  | PTD | EN | M4)) /*GPIO_31*/ \
> +	/* ETK (ES2 onwards) */\
> +	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTD | DIS  | M3)) \
> +					/* hsusb1_stp */ \
> +	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)) \
> +					/* hsusb1_clk */\
> +	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
> +	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
> +	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
> +	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) \
> +	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) \
> +	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) \
> +	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) \
> +	/* Die to Die */\
> +	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
> +	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
> +	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
> +	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) \
> +
> +#endif
> diff --git a/boards.cfg b/boards.cfg
> index 32a32f5..1f264b1 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -202,6 +202,7 @@ dig297                       arm         armv7       dig297              comelit
>  igep0020                     arm         armv7       igep0020            isee           omap3
>  igep0030                     arm         armv7       igep0030            isee           omap3
>  am3517_evm                   arm         armv7       am3517evm           logicpd        omap3
> +mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
>  omap3_zoom1                  arm         armv7       zoom1               logicpd        omap3
>  omap3_zoom2                  arm         armv7       zoom2               logicpd        omap3
>  omap3_logic                  arm         armv7       omap3som            logicpd        omap3
> diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
> new file mode 100644
> index 0000000..2034b59
> --- /dev/null
> +++ b/include/configs/mt_ventoux.h
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright (C) 2011
> + * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
> + *
> + * Copyright (C) 2009 TechNexion Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include "tam3517-common.h"
> +
> +#define MACH_TYPE_AM3517_MT_VENTOUX	3832
> +#define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
> +
> +#define CONFIG_BOOTDELAY	10
> +#define CONFIG_BOOTFILE		"uImage"
> +#define CONFIG_AUTO_COMPLETE
> +
> +#define CONFIG_HOSTNAME mt_ventoux
> +
> +/*
> + * Miscellaneous configurable options
> + */
> +#define V_PROMPT			"mt_ventoux => "
> +#define CONFIG_SYS_PROMPT		V_PROMPT
> +
> +/*
> + * FPGA
> + */
> +#define CONFIG_CMD_FPGA
> +#define CONFIG_FPGA
> +#define CONFIG_FPGA_XILINX
> +#define CONFIG_FPGA_SPARTAN3
> +#define CONFIG_SYS_FPGA_PROG_FEEDBACK
> +#define CONFIG_SYS_FPGA_WAIT	10000
> +#define CONFIG_MAX_FPGA_DEVICES	1
> +#define CONFIG_FPGA_DELAY() udelay(1)
> +#define CONFIG_SYS_FPGA_PROG_FEEDBACK
> +
> +#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
> +	"bootcmd=run net_nfs\0"
> +
> +#endif /* __CONFIG_H */
> diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
> index 13eeadb..254968f 100644
> --- a/include/configs/tam3517-common.h
> +++ b/include/configs/tam3517-common.h
> @@ -303,8 +303,8 @@
>  /* Setup MTD for NAND on the SOM */
>  #define MTDIDS_DEFAULT		"nand0=omap2-nand.0"
>  #define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:512k(MLO)," \
> -				"512k(u-boot),128k(env1)," \
> -				"128k(env2),6m(kernel),-(rootfs)"
> +				"1m(u-boot),256k(env1)," \
> +				"256k(env2),6m(kernel),-(rootfs)"
>  
>  #define xstr(s)	str(s)
>  #define str(s)	#s

-- 
Regards,
Igor.