[Qemu-devel] [PULL 00/12] arm-devs queue

[Qemu-devel] [PULL 00/12] arm-devs queue

[Peter Maydell]

This is a pullreq for accumulated arm-devs patches; please pull.

NB: over the Christmas break my usual workflow got a bit disrupted so
I might have missed some patches; if there's anything that you were
expecting to be in here but isn't, please ping, resubmit the patch, etc.

-- PMM


The following changes since commit f3c6a169a39d188e98c17a0a0ebfa7f85e5aafdd:

  Merge remote-tracking branch 'qemu-kvm/memory/page_desc' into staging (2012-01-03 14:39:05 -0600)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git arm-devs.for-upstream

Juha Riihimäki (3):
      hw/omap1.c: Separate PWL from omap_mpu_state
      hw/omap1.c: Separate PWT from omap_mpu_state
      hw/omap1.c: Separate dpll_ctl from omap_mpu_state

Mark Langsdorf (1):
      arm: Set frequencies for arm_timer

Peter Maydell (5):
      hw/pl181.c: Add save/load support
      hw/pl110.c: Add post-load hook to invalidate display
      hw/omap1.c: omap_mpuio_init() need not be public
      hw/omap1.c: Drop unused includes
      hw/omap_gpmc: Fix region map/unmap when configuring prefetch engine

Rob Herring (3):
      arm: add missing scu registers
      arm: add dummy gic security registers
      add L2x0/PL310 cache controller device

 Makefile.target |    1 +
 hw/a9mpcore.c   |   36 ++++++++++-
 hw/arm_gic.c    |    6 ++
 hw/arm_l2x0.c   |  181 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/arm_timer.c  |   24 ++++++--
 hw/omap.h       |   28 +--------
 hw/omap1.c      |  151 +++++++++++++++++++++++++++-------------------
 hw/omap_gpmc.c  |   30 +++++++---
 hw/pl110.c      |   11 ++++
 hw/pl181.c      |   49 ++++++++++++---
 10 files changed, 404 insertions(+), 113 deletions(-)
 create mode 100644 hw/arm_l2x0.c

[Qemu-devel] [PATCH 01/12] hw/pl181.c: Add save/load support

[Peter Maydell]

Add save/load support to the PL181.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/pl181.c |   49 ++++++++++++++++++++++++++++++++++++++++---------
 1 files changed, 40 insertions(+), 9 deletions(-)

diff --git a/hw/pl181.c b/hw/pl181.c
index d05bc19..b79aa41 100644
--- a/hw/pl181.c
+++ b/hw/pl181.c
@@ -38,20 +38,45 @@ typedef struct {
     uint32_t datacnt;
     uint32_t status;
     uint32_t mask[2];
-    int fifo_pos;
-    int fifo_len;
+    int32_t fifo_pos;
+    int32_t fifo_len;
     /* The linux 2.6.21 driver is buggy, and misbehaves if new data arrives
        while it is reading the FIFO.  We hack around this be defering
        subsequent transfers until after the driver polls the status word.
        http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=4446/1
      */
-    int linux_hack;
+    int32_t linux_hack;
     uint32_t fifo[PL181_FIFO_LEN];
     qemu_irq irq[2];
     /* GPIO outputs for 'card is readonly' and 'card inserted' */
     qemu_irq cardstatus[2];
 } pl181_state;
 
+static const VMStateDescription vmstate_pl181 = {
+    .name = "pl181",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(clock, pl181_state),
+        VMSTATE_UINT32(power, pl181_state),
+        VMSTATE_UINT32(cmdarg, pl181_state),
+        VMSTATE_UINT32(cmd, pl181_state),
+        VMSTATE_UINT32(datatimer, pl181_state),
+        VMSTATE_UINT32(datalength, pl181_state),
+        VMSTATE_UINT32(respcmd, pl181_state),
+        VMSTATE_UINT32_ARRAY(response, pl181_state, 4),
+        VMSTATE_UINT32(datactrl, pl181_state),
+        VMSTATE_UINT32(datacnt, pl181_state),
+        VMSTATE_UINT32(status, pl181_state),
+        VMSTATE_UINT32_ARRAY(mask, pl181_state, 2),
+        VMSTATE_INT32(fifo_pos, pl181_state),
+        VMSTATE_INT32(fifo_len, pl181_state),
+        VMSTATE_INT32(linux_hack, pl181_state),
+        VMSTATE_UINT32_ARRAY(fifo, pl181_state, PL181_FIFO_LEN),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 #define PL181_CMD_INDEX     0x3f
 #define PL181_CMD_RESPONSE  (1 << 6)
 #define PL181_CMD_LONGRESP  (1 << 7)
@@ -420,9 +445,9 @@ static const MemoryRegionOps pl181_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
-static void pl181_reset(void *opaque)
+static void pl181_reset(DeviceState *d)
 {
-    pl181_state *s = (pl181_state *)opaque;
+    pl181_state *s = DO_UPCAST(pl181_state, busdev.qdev, d);
 
     s->power = 0;
     s->cmdarg = 0;
@@ -459,15 +484,21 @@ static int pl181_init(SysBusDevice *dev)
     qdev_init_gpio_out(&s->busdev.qdev, s->cardstatus, 2);
     dinfo = drive_get_next(IF_SD);
     s->card = sd_init(dinfo ? dinfo->bdrv : NULL, 0);
-    qemu_register_reset(pl181_reset, s);
-    pl181_reset(s);
-    /* ??? Save/restore.  */
     return 0;
 }
 
+static SysBusDeviceInfo pl181_info = {
+    .init = pl181_init,
+    .qdev.name = "pl181",
+    .qdev.size = sizeof(pl181_state),
+    .qdev.vmsd = &vmstate_pl181,
+    .qdev.reset = pl181_reset,
+    .qdev.no_user = 1,
+};
+
 static void pl181_register_devices(void)
 {
-    sysbus_register_dev("pl181", sizeof(pl181_state), pl181_init);
+    sysbus_register_withprop(&pl181_info);
 }
 
 device_init(pl181_register_devices)
-- 
1.7.1

[Qemu-devel] [PATCH 02/12] hw/pl110.c: Add post-load hook to invalidate display

[Peter Maydell]

Add a post-load hook which invalidates the display. In particular, if we
don't do this and the display size we've just reloaded is larger than
the default then we will segfault trying to read off the end of the buffer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/pl110.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/hw/pl110.c b/hw/pl110.c
index 303a9bc..0e1f415 100644
--- a/hw/pl110.c
+++ b/hw/pl110.c
@@ -60,10 +60,13 @@ typedef struct {
     qemu_irq irq;
 } pl110_state;
 
+static int vmstate_pl110_post_load(void *opaque, int version_id);
+
 static const VMStateDescription vmstate_pl110 = {
     .name = "pl110",
     .version_id = 2,
     .minimum_version_id = 1,
+    .post_load = vmstate_pl110_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_INT32(version, pl110_state),
         VMSTATE_UINT32_ARRAY(timing, pl110_state, 4),
@@ -430,6 +433,14 @@ static void pl110_mux_ctrl_set(void *opaque, int line, int level)
     s->mux_ctrl = level;
 }
 
+static int vmstate_pl110_post_load(void *opaque, int version_id)
+{
+    pl110_state *s = opaque;
+    /* Make sure we redraw, and at the right size */
+    pl110_invalidate_display(s);
+    return 0;
+}
+
 static int pl110_init(SysBusDevice *dev)
 {
     pl110_state *s = FROM_SYSBUS(pl110_state, dev);
-- 
1.7.1

[Qemu-devel] [PATCH 03/12] hw/omap1.c: omap_mpuio_init() need not be public

[Peter Maydell]

omap_mpuio_init() is only used and defined in omap1.c, so make it static.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/omap.h  |    4 ----
 hw/omap1.c |    2 +-
 2 files changed, 1 insertions(+), 5 deletions(-)

diff --git a/hw/omap.h b/hw/omap.h
index 42eb361..5fe33db 100644
--- a/hw/omap.h
+++ b/hw/omap.h
@@ -672,10 +672,6 @@ void omap_uart_reset(struct omap_uart_s *s);
 void omap_uart_attach(struct omap_uart_s *s, CharDriverState *chr);
 
 struct omap_mpuio_s;
-struct omap_mpuio_s *omap_mpuio_init(MemoryRegion *system_memory,
-                target_phys_addr_t base,
-                qemu_irq kbd_int, qemu_irq gpio_int, qemu_irq wakeup,
-                omap_clk clk);
 qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s);
 void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler);
 void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down);
diff --git a/hw/omap1.c b/hw/omap1.c
index 53cde76..dddac92 100644
--- a/hw/omap1.c
+++ b/hw/omap1.c
@@ -2066,7 +2066,7 @@ static void omap_mpuio_onoff(void *opaque, int line, int on)
         omap_mpuio_kbd_update(s);
 }
 
-struct omap_mpuio_s *omap_mpuio_init(MemoryRegion *memory,
+static struct omap_mpuio_s *omap_mpuio_init(MemoryRegion *memory,
                 target_phys_addr_t base,
                 qemu_irq kbd_int, qemu_irq gpio_int, qemu_irq wakeup,
                 omap_clk clk)
-- 
1.7.1

[Qemu-devel] [PATCH 04/12] hw/omap1.c: Separate PWL from omap_mpu_state

[Peter Maydell]

From: Juha Riihimäki <juha.riihimaki@nokia.com>

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/omap.h  |    8 +-------
 hw/omap1.c |   60 ++++++++++++++++++++++++++++++++++++------------------------
 2 files changed, 37 insertions(+), 31 deletions(-)

diff --git a/hw/omap.h b/hw/omap.h
index 5fe33db..851ad46 100644
--- a/hw/omap.h
+++ b/hw/omap.h
@@ -829,7 +829,6 @@ struct omap_mpu_state_s {
     MemoryRegion tcmi_iomem;
     MemoryRegion clkm_iomem;
     MemoryRegion clkdsp_iomem;
-    MemoryRegion pwl_iomem;
     MemoryRegion pwt_iomem;
     MemoryRegion mpui_io_iomem;
     MemoryRegion tap_iomem;
@@ -867,12 +866,7 @@ struct omap_mpu_state_s {
 
     struct omap_uwire_s *microwire;
 
-    struct {
-        uint8_t output;
-        uint8_t level;
-        uint8_t enable;
-        int clk;
-    } pwl;
+    struct omap_pwl_s *pwl;
 
     struct {
         uint8_t frc;
diff --git a/hw/omap1.c b/hw/omap1.c
index dddac92..ccc6ecf 100644
--- a/hw/omap1.c
+++ b/hw/omap1.c
@@ -2289,12 +2289,20 @@ void omap_uwire_attach(struct omap_uwire_s *s,
 }
 
 /* Pseudonoise Pulse-Width Light Modulator */
-static void omap_pwl_update(struct omap_mpu_state_s *s)
+struct omap_pwl_s {
+    MemoryRegion iomem;
+    uint8_t output;
+    uint8_t level;
+    uint8_t enable;
+    int clk;
+};
+
+static void omap_pwl_update(struct omap_pwl_s *s)
 {
-    int output = (s->pwl.clk && s->pwl.enable) ? s->pwl.level : 0;
+    int output = (s->clk && s->enable) ? s->level : 0;
 
-    if (output != s->pwl.output) {
-        s->pwl.output = output;
+    if (output != s->output) {
+        s->output = output;
         printf("%s: Backlight now at %i/256\n", __FUNCTION__, output);
     }
 }
@@ -2302,7 +2310,7 @@ static void omap_pwl_update(struct omap_mpu_state_s *s)
 static uint64_t omap_pwl_read(void *opaque, target_phys_addr_t addr,
                               unsigned size)
 {
-    struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
+    struct omap_pwl_s *s = (struct omap_pwl_s *) opaque;
     int offset = addr & OMAP_MPUI_REG_MASK;
 
     if (size != 1) {
@@ -2311,9 +2319,9 @@ static uint64_t omap_pwl_read(void *opaque, target_phys_addr_t addr,
 
     switch (offset) {
     case 0x00:	/* PWL_LEVEL */
-        return s->pwl.level;
+        return s->level;
     case 0x04:	/* PWL_CTRL */
-        return s->pwl.enable;
+        return s->enable;
     }
     OMAP_BAD_REG(addr);
     return 0;
@@ -2322,7 +2330,7 @@ static uint64_t omap_pwl_read(void *opaque, target_phys_addr_t addr,
 static void omap_pwl_write(void *opaque, target_phys_addr_t addr,
                            uint64_t value, unsigned size)
 {
-    struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
+    struct omap_pwl_s *s = (struct omap_pwl_s *) opaque;
     int offset = addr & OMAP_MPUI_REG_MASK;
 
     if (size != 1) {
@@ -2331,11 +2339,11 @@ static void omap_pwl_write(void *opaque, target_phys_addr_t addr,
 
     switch (offset) {
     case 0x00:	/* PWL_LEVEL */
-        s->pwl.level = value;
+        s->level = value;
         omap_pwl_update(s);
         break;
     case 0x04:	/* PWL_CTRL */
-        s->pwl.enable = value & 1;
+        s->enable = value & 1;
         omap_pwl_update(s);
         break;
     default:
@@ -2350,34 +2358,37 @@ static const MemoryRegionOps omap_pwl_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
-static void omap_pwl_reset(struct omap_mpu_state_s *s)
+static void omap_pwl_reset(struct omap_pwl_s *s)
 {
-    s->pwl.output = 0;
-    s->pwl.level = 0;
-    s->pwl.enable = 0;
-    s->pwl.clk = 1;
+    s->output = 0;
+    s->level = 0;
+    s->enable = 0;
+    s->clk = 1;
     omap_pwl_update(s);
 }
 
 static void omap_pwl_clk_update(void *opaque, int line, int on)
 {
-    struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
+    struct omap_pwl_s *s = (struct omap_pwl_s *) opaque;
 
-    s->pwl.clk = on;
+    s->clk = on;
     omap_pwl_update(s);
 }
 
-static void omap_pwl_init(MemoryRegion *system_memory,
-                target_phys_addr_t base, struct omap_mpu_state_s *s,
-                omap_clk clk)
+static struct omap_pwl_s *omap_pwl_init(MemoryRegion *system_memory,
+                                        target_phys_addr_t base,
+                                        omap_clk clk)
 {
+    struct omap_pwl_s *s = g_malloc0(sizeof(*s));
+
     omap_pwl_reset(s);
 
-    memory_region_init_io(&s->pwl_iomem, &omap_pwl_ops, s,
+    memory_region_init_io(&s->iomem, &omap_pwl_ops, s,
                           "omap-pwl", 0x800);
-    memory_region_add_subregion(system_memory, base, &s->pwl_iomem);
+    memory_region_add_subregion(system_memory, base, &s->iomem);
 
     omap_clk_adduser(clk, qemu_allocate_irqs(omap_pwl_clk_update, s, 1)[0]);
+    return s;
 }
 
 /* Pulse-Width Tone module */
@@ -3667,7 +3678,7 @@ static void omap1_mpu_reset(void *opaque)
     omap_mmc_reset(mpu->mmc);
     omap_mpuio_reset(mpu->mpuio);
     omap_uwire_reset(mpu->microwire);
-    omap_pwl_reset(mpu);
+    omap_pwl_reset(mpu->pwl);
     omap_pwt_reset(mpu);
     omap_i2c_reset(mpu->i2c[0]);
     omap_rtc_reset(mpu->rtc);
@@ -3961,7 +3972,8 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory,
                                    qdev_get_gpio_in(s->ih[1], OMAP_INT_uWireRX),
                     s->drq[OMAP_DMA_UWIRE_TX], omap_findclk(s, "mpuper_ck"));
 
-    omap_pwl_init(system_memory, 0xfffb5800, s, omap_findclk(s, "armxor_ck"));
+    s->pwl = omap_pwl_init(system_memory, 0xfffb5800,
+                           omap_findclk(s, "armxor_ck"));
     omap_pwt_init(system_memory, 0xfffb6000, s, omap_findclk(s, "armxor_ck"));
 
     s->i2c[0] = omap_i2c_init(system_memory, 0xfffb3800,
-- 
1.7.1

[Qemu-devel] [PATCH 05/12] hw/omap1.c: Separate PWT from omap_mpu_state

[Peter Maydell]

From: Juha Riihimäki <juha.riihimaki@nokia.com>

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/omap.h  |   10 +---------
 hw/omap1.c |   57 ++++++++++++++++++++++++++++++++++-----------------------
 2 files changed, 35 insertions(+), 32 deletions(-)

diff --git a/hw/omap.h b/hw/omap.h
index 851ad46..2e227b5 100644
--- a/hw/omap.h
+++ b/hw/omap.h
@@ -829,7 +829,6 @@ struct omap_mpu_state_s {
     MemoryRegion tcmi_iomem;
     MemoryRegion clkm_iomem;
     MemoryRegion clkdsp_iomem;
-    MemoryRegion pwt_iomem;
     MemoryRegion mpui_io_iomem;
     MemoryRegion tap_iomem;
     MemoryRegion imif_ram;
@@ -867,14 +866,7 @@ struct omap_mpu_state_s {
     struct omap_uwire_s *microwire;
 
     struct omap_pwl_s *pwl;
-
-    struct {
-        uint8_t frc;
-        uint8_t vrc;
-        uint8_t gcr;
-        omap_clk clk;
-    } pwt;
-
+    struct omap_pwt_s *pwt;
     struct omap_i2c_s *i2c[2];
 
     struct omap_rtc_s *rtc;
diff --git a/hw/omap1.c b/hw/omap1.c
index ccc6ecf..4635938 100644
--- a/hw/omap1.c
+++ b/hw/omap1.c
@@ -2392,10 +2392,18 @@ static struct omap_pwl_s *omap_pwl_init(MemoryRegion *system_memory,
 }
 
 /* Pulse-Width Tone module */
+struct omap_pwt_s {
+    MemoryRegion iomem;
+    uint8_t frc;
+    uint8_t vrc;
+    uint8_t gcr;
+    omap_clk clk;
+};
+
 static uint64_t omap_pwt_read(void *opaque, target_phys_addr_t addr,
                               unsigned size)
 {
-    struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
+    struct omap_pwt_s *s = (struct omap_pwt_s *) opaque;
     int offset = addr & OMAP_MPUI_REG_MASK;
 
     if (size != 1) {
@@ -2404,11 +2412,11 @@ static uint64_t omap_pwt_read(void *opaque, target_phys_addr_t addr,
 
     switch (offset) {
     case 0x00:	/* FRC */
-        return s->pwt.frc;
+        return s->frc;
     case 0x04:	/* VCR */
-        return s->pwt.vrc;
+        return s->vrc;
     case 0x08:	/* GCR */
-        return s->pwt.gcr;
+        return s->gcr;
     }
     OMAP_BAD_REG(addr);
     return 0;
@@ -2417,7 +2425,7 @@ static uint64_t omap_pwt_read(void *opaque, target_phys_addr_t addr,
 static void omap_pwt_write(void *opaque, target_phys_addr_t addr,
                            uint64_t value, unsigned size)
 {
-    struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
+    struct omap_pwt_s *s = (struct omap_pwt_s *) opaque;
     int offset = addr & OMAP_MPUI_REG_MASK;
 
     if (size != 1) {
@@ -2426,16 +2434,16 @@ static void omap_pwt_write(void *opaque, target_phys_addr_t addr,
 
     switch (offset) {
     case 0x00:	/* FRC */
-        s->pwt.frc = value & 0x3f;
+        s->frc = value & 0x3f;
         break;
     case 0x04:	/* VRC */
-        if ((value ^ s->pwt.vrc) & 1) {
+        if ((value ^ s->vrc) & 1) {
             if (value & 1)
                 printf("%s: %iHz buzz on\n", __FUNCTION__, (int)
                                 /* 1.5 MHz from a 12-MHz or 13-MHz PWT_CLK */
-                                ((omap_clk_getrate(s->pwt.clk) >> 3) /
+                                ((omap_clk_getrate(s->clk) >> 3) /
                                  /* Pre-multiplexer divider */
-                                 ((s->pwt.gcr & 2) ? 1 : 154) /
+                                 ((s->gcr & 2) ? 1 : 154) /
                                  /* Octave multiplexer */
                                  (2 << (value & 3)) *
                                  /* 101/107 divider */
@@ -2450,10 +2458,10 @@ static void omap_pwt_write(void *opaque, target_phys_addr_t addr,
             else
                 printf("%s: silence!\n", __FUNCTION__);
         }
-        s->pwt.vrc = value & 0x7f;
+        s->vrc = value & 0x7f;
         break;
     case 0x08:	/* GCR */
-        s->pwt.gcr = value & 3;
+        s->gcr = value & 3;
         break;
     default:
         OMAP_BAD_REG(addr);
@@ -2467,23 +2475,25 @@ static const MemoryRegionOps omap_pwt_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
-static void omap_pwt_reset(struct omap_mpu_state_s *s)
+static void omap_pwt_reset(struct omap_pwt_s *s)
 {
-    s->pwt.frc = 0;
-    s->pwt.vrc = 0;
-    s->pwt.gcr = 0;
+    s->frc = 0;
+    s->vrc = 0;
+    s->gcr = 0;
 }
 
-static void omap_pwt_init(MemoryRegion *system_memory,
-                target_phys_addr_t base, struct omap_mpu_state_s *s,
-                omap_clk clk)
+static struct omap_pwt_s *omap_pwt_init(MemoryRegion *system_memory,
+                                        target_phys_addr_t base,
+                                        omap_clk clk)
 {
-    s->pwt.clk = clk;
+    struct omap_pwt_s *s = g_malloc0(sizeof(*s));
+    s->clk = clk;
     omap_pwt_reset(s);
 
-    memory_region_init_io(&s->pwt_iomem, &omap_pwt_ops, s,
+    memory_region_init_io(&s->iomem, &omap_pwt_ops, s,
                           "omap-pwt", 0x800);
-    memory_region_add_subregion(system_memory, base, &s->pwt_iomem);
+    memory_region_add_subregion(system_memory, base, &s->iomem);
+    return s;
 }
 
 /* Real-time Clock module */
@@ -3679,7 +3689,7 @@ static void omap1_mpu_reset(void *opaque)
     omap_mpuio_reset(mpu->mpuio);
     omap_uwire_reset(mpu->microwire);
     omap_pwl_reset(mpu->pwl);
-    omap_pwt_reset(mpu);
+    omap_pwt_reset(mpu->pwt);
     omap_i2c_reset(mpu->i2c[0]);
     omap_rtc_reset(mpu->rtc);
     omap_mcbsp_reset(mpu->mcbsp1);
@@ -3974,7 +3984,8 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory,
 
     s->pwl = omap_pwl_init(system_memory, 0xfffb5800,
                            omap_findclk(s, "armxor_ck"));
-    omap_pwt_init(system_memory, 0xfffb6000, s, omap_findclk(s, "armxor_ck"));
+    s->pwt = omap_pwt_init(system_memory, 0xfffb6000,
+                           omap_findclk(s, "armxor_ck"));
 
     s->i2c[0] = omap_i2c_init(system_memory, 0xfffb3800,
                               qdev_get_gpio_in(s->ih[1], OMAP_INT_I2C),
-- 
1.7.1

[Qemu-devel] [PATCH 06/12] hw/omap1.c: Separate dpll_ctl from omap_mpu_state

[Peter Maydell]

From: Juha Riihimäki <juha.riihimaki@nokia.com>

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/omap.h  |    6 +-----
 hw/omap1.c |   28 ++++++++++++++++++----------
 2 files changed, 19 insertions(+), 15 deletions(-)

diff --git a/hw/omap.h b/hw/omap.h
index 2e227b5..60fa34c 100644
--- a/hw/omap.h
+++ b/hw/omap.h
@@ -904,11 +904,7 @@ struct omap_mpu_state_s {
 
     uint32_t tcmi_regs[17];
 
-    struct dpll_ctl_s {
-        MemoryRegion iomem;
-        uint16_t mode;
-        omap_clk dpll;
-    } dpll[3];
+    struct dpll_ctl_s *dpll[3];
 
     omap_clk clks;
     struct {
diff --git a/hw/omap1.c b/hw/omap1.c
index 4635938..6ab9192 100644
--- a/hw/omap1.c
+++ b/hw/omap1.c
@@ -1344,6 +1344,12 @@ static void omap_tcmi_init(MemoryRegion *memory, target_phys_addr_t base,
 }
 
 /* Digital phase-locked loops control */
+struct dpll_ctl_s {
+    MemoryRegion iomem;
+    uint16_t mode;
+    omap_clk dpll;
+};
+
 static uint64_t omap_dpll_read(void *opaque, target_phys_addr_t addr,
                                unsigned size)
 {
@@ -1409,15 +1415,17 @@ static void omap_dpll_reset(struct dpll_ctl_s *s)
     omap_clk_setrate(s->dpll, 1, 1);
 }
 
-static void omap_dpll_init(MemoryRegion *memory, struct dpll_ctl_s *s,
+static struct dpll_ctl_s  *omap_dpll_init(MemoryRegion *memory,
                            target_phys_addr_t base, omap_clk clk)
 {
+    struct dpll_ctl_s *s = g_malloc0(sizeof(*s));
     memory_region_init_io(&s->iomem, &omap_dpll_ops, s, "omap-dpll", 0x100);
 
     s->dpll = clk;
     omap_dpll_reset(s);
 
     memory_region_add_subregion(memory, base, &s->iomem);
+    return s;
 }
 
 /* MPU Clock/Reset/Power Mode Control */
@@ -3679,9 +3687,9 @@ static void omap1_mpu_reset(void *opaque)
     omap_mpui_reset(mpu);
     omap_tipb_bridge_reset(mpu->private_tipb);
     omap_tipb_bridge_reset(mpu->public_tipb);
-    omap_dpll_reset(&mpu->dpll[0]);
-    omap_dpll_reset(&mpu->dpll[1]);
-    omap_dpll_reset(&mpu->dpll[2]);
+    omap_dpll_reset(mpu->dpll[0]);
+    omap_dpll_reset(mpu->dpll[1]);
+    omap_dpll_reset(mpu->dpll[2]);
     omap_uart_reset(mpu->uart[0]);
     omap_uart_reset(mpu->uart[1]);
     omap_uart_reset(mpu->uart[2]);
@@ -3947,12 +3955,12 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory,
                     "uart3",
                     serial_hds[0] && serial_hds[1] ? serial_hds[2] : NULL);
 
-    omap_dpll_init(system_memory,
-                   &s->dpll[0], 0xfffecf00, omap_findclk(s, "dpll1"));
-    omap_dpll_init(system_memory,
-                   &s->dpll[1], 0xfffed000, omap_findclk(s, "dpll2"));
-    omap_dpll_init(system_memory,
-                   &s->dpll[2], 0xfffed100, omap_findclk(s, "dpll3"));
+    s->dpll[0] = omap_dpll_init(system_memory, 0xfffecf00,
+                                omap_findclk(s, "dpll1"));
+    s->dpll[1] = omap_dpll_init(system_memory, 0xfffed000,
+                                omap_findclk(s, "dpll2"));
+    s->dpll[2] = omap_dpll_init(system_memory, 0xfffed100,
+                                omap_findclk(s, "dpll3"));
 
     dinfo = drive_get(IF_SD, 0, 0);
     if (!dinfo) {
-- 
1.7.1

[Qemu-devel] [PATCH 07/12] hw/omap1.c: Drop unused includes

[Peter Maydell]

Drop includes of qemu-timer.h, qemu-char.h and pc.h as they are no
longer needed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/omap1.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/hw/omap1.c b/hw/omap1.c
index 6ab9192..976ef71 100644
--- a/hw/omap1.c
+++ b/hw/omap1.c
@@ -20,11 +20,7 @@
 #include "arm-misc.h"
 #include "omap.h"
 #include "sysemu.h"
-#include "qemu-timer.h"
-#include "qemu-char.h"
 #include "soc_dma.h"
-/* We use pc-style serial ports.  */
-#include "pc.h"
 #include "blockdev.h"
 #include "range.h"
 #include "sysbus.h"
-- 
1.7.1

[Qemu-devel] [PATCH 08/12] hw/omap_gpmc: Fix region map/unmap when configuring prefetch engine

[Peter Maydell]

When configuring the prefetch engine (and also when resetting from
a state where the prefetch engine was enabled) be careful to adhere
to the "unmap/change config fields/map" ordering, to avoid trying
to delete the wrong MemoryRegions. This fixes an assertion failure
in some cases.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexander Graf <agraf@suse.de>
Tested-by: Alexander Graf <agraf@suse.de>
---
 hw/omap_gpmc.c |   30 +++++++++++++++++++++---------
 1 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/hw/omap_gpmc.c b/hw/omap_gpmc.c
index 414f9f5..2fc4137 100644
--- a/hw/omap_gpmc.c
+++ b/hw/omap_gpmc.c
@@ -443,6 +443,12 @@ void omap_gpmc_reset(struct omap_gpmc_s *s)
     s->irqst = 0;
     s->irqen = 0;
     omap_gpmc_int_update(s);
+    for (i = 0; i < 8; i++) {
+        /* This has to happen before we change any of the config
+         * used to determine which memory regions are mapped or unmapped.
+         */
+        omap_gpmc_cs_unmap(s, i);
+    }
     s->timeout = 0;
     s->config = 0xa00;
     s->prefetch.config1 = 0x00004000;
@@ -451,7 +457,6 @@ void omap_gpmc_reset(struct omap_gpmc_s *s)
     s->prefetch.fifopointer = 0;
     s->prefetch.count = 0;
     for (i = 0; i < 8; i ++) {
-        omap_gpmc_cs_unmap(s, i);
         s->cs_file[i].config[1] = 0x101001;
         s->cs_file[i].config[2] = 0x020201;
         s->cs_file[i].config[3] = 0x10031003;
@@ -716,24 +721,31 @@ static void omap_gpmc_write(void *opaque, target_phys_addr_t addr,
 
     case 0x1e0:	/* GPMC_PREFETCH_CONFIG1 */
         if (!s->prefetch.startengine) {
-            uint32_t oldconfig1 = s->prefetch.config1;
+            uint32_t newconfig1 = value & 0x7f8f7fbf;
             uint32_t changed;
-            s->prefetch.config1 = value & 0x7f8f7fbf;
-            changed = oldconfig1 ^ s->prefetch.config1;
+            changed = newconfig1 ^ s->prefetch.config1;
             if (changed & (0x80 | 0x7000000)) {
                 /* Turning the engine on or off, or mapping it somewhere else.
                  * cs_map() and cs_unmap() check the prefetch config and
                  * overall CSVALID bits, so it is sufficient to unmap-and-map
-                 * both the old cs and the new one.
+                 * both the old cs and the new one. Note that we adhere to
+                 * the "unmap/change config/map" order (and not unmap twice
+                 * if newcs == oldcs), otherwise we'll try to delete the wrong
+                 * memory region.
                  */
-                int oldcs = prefetch_cs(oldconfig1);
-                int newcs = prefetch_cs(s->prefetch.config1);
+                int oldcs = prefetch_cs(s->prefetch.config1);
+                int newcs = prefetch_cs(newconfig1);
                 omap_gpmc_cs_unmap(s, oldcs);
-                omap_gpmc_cs_map(s, oldcs);
-                if (newcs != oldcs) {
+                if (oldcs != newcs) {
                     omap_gpmc_cs_unmap(s, newcs);
+                }
+                s->prefetch.config1 = newconfig1;
+                omap_gpmc_cs_map(s, oldcs);
+                if (oldcs != newcs) {
                     omap_gpmc_cs_map(s, newcs);
                 }
+            } else {
+                s->prefetch.config1 = newconfig1;
             }
         }
         break;
-- 
1.7.1

[Qemu-devel] [PATCH 09/12] arm: add missing scu registers

[Peter Maydell]

From: Rob Herring <rob.herring@calxeda.com>

Add power control register to a9mpcore

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/a9mpcore.c |   36 +++++++++++++++++++++++++++++++++---
 1 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/hw/a9mpcore.c b/hw/a9mpcore.c
index cd2985f..3ef0e13 100644
--- a/hw/a9mpcore.c
+++ b/hw/a9mpcore.c
@@ -29,6 +29,7 @@ gic_get_current_cpu(void)
 typedef struct a9mp_priv_state {
     gic_state gic;
     uint32_t scu_control;
+    uint32_t scu_status;
     uint32_t old_timer_status[8];
     uint32_t num_cpu;
     qemu_irq *timer_irq;
@@ -48,7 +49,13 @@ static uint64_t a9_scu_read(void *opaque, target_phys_addr_t offset,
     case 0x04: /* Configuration */
         return (((1 << s->num_cpu) - 1) << 4) | (s->num_cpu - 1);
     case 0x08: /* CPU Power Status */
-        return 0;
+        return s->scu_status;
+    case 0x09: /* CPU status.  */
+        return s->scu_status >> 8;
+    case 0x0a: /* CPU status.  */
+        return s->scu_status >> 16;
+    case 0x0b: /* CPU status.  */
+        return s->scu_status >> 24;
     case 0x0c: /* Invalidate All Registers In Secure State */
         return 0;
     case 0x40: /* Filtering Start Address Register */
@@ -67,12 +74,35 @@ static void a9_scu_write(void *opaque, target_phys_addr_t offset,
                          uint64_t value, unsigned size)
 {
     a9mp_priv_state *s = (a9mp_priv_state *)opaque;
+    uint32_t mask;
+    uint32_t shift;
+    switch (size) {
+    case 1:
+        mask = 0xff;
+        break;
+    case 2:
+        mask = 0xffff;
+        break;
+    case 4:
+        mask = 0xffffffff;
+        break;
+    default:
+        fprintf(stderr, "Invalid size %u in write to a9 scu register %x\n",
+                size, offset);
+        return;
+    }
+
     switch (offset) {
     case 0x00: /* Control */
         s->scu_control = value & 1;
         break;
     case 0x4: /* Configuration: RO */
         break;
+    case 0x08: case 0x09: case 0x0A: case 0x0B: /* Power Control */
+        shift = (offset - 0x8) * 8;
+        s->scu_status &= ~(mask << shift);
+        s->scu_status |= ((value & mask) << shift);
+        break;
     case 0x0c: /* Invalidate All Registers In Secure State */
         /* no-op as we do not implement caches */
         break;
@@ -80,7 +110,6 @@ static void a9_scu_write(void *opaque, target_phys_addr_t offset,
     case 0x44: /* Filtering End Address Register */
         /* RAZ/WI, like an implementation with only one AXI master */
         break;
-    case 0x8: /* CPU Power Status */
     case 0x50: /* SCU Access Control Register */
     case 0x54: /* SCU Non-secure Access Control Register */
         /* unimplemented, fall through */
@@ -169,11 +198,12 @@ static int a9mp_priv_init(SysBusDevice *dev)
 
 static const VMStateDescription vmstate_a9mp_priv = {
     .name = "a9mpcore_priv",
-    .version_id = 1,
+    .version_id = 2,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(scu_control, a9mp_priv_state),
         VMSTATE_UINT32_ARRAY(old_timer_status, a9mp_priv_state, 8),
+        VMSTATE_UINT32_V(scu_status, a9mp_priv_state, 2),
         VMSTATE_END_OF_LIST()
     }
 };
-- 
1.7.1

[Qemu-devel] [PATCH 10/12] arm: Set frequencies for arm_timer

[Peter Maydell]

From: Mark Langsdorf <mark.langsdorf@calxeda.com>

Use qdev properties to allow board modelers to set the frequencies
for the sp804 timer. Each of the sp804's timers can have an
individual frequency. The timers default to 1MHz.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm_timer.c |   24 +++++++++++++++++++-----
 1 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/hw/arm_timer.c b/hw/arm_timer.c
index 0a5b9d2..60e1c63 100644
--- a/hw/arm_timer.c
+++ b/hw/arm_timer.c
@@ -9,6 +9,8 @@
 
 #include "sysbus.h"
 #include "qemu-timer.h"
+#include "qemu-common.h"
+#include "qdev.h"
 
 /* Common timer implementation.  */
 
@@ -178,6 +180,7 @@ typedef struct {
     SysBusDevice busdev;
     MemoryRegion iomem;
     arm_timer_state *timer[2];
+    uint32_t freq0, freq1;
     int level[2];
     qemu_irq irq;
 } sp804_state;
@@ -269,10 +272,11 @@ static int sp804_init(SysBusDevice *dev)
 
     qi = qemu_allocate_irqs(sp804_set_irq, s, 2);
     sysbus_init_irq(dev, &s->irq);
-    /* ??? The timers are actually configurable between 32kHz and 1MHz, but
-       we don't implement that.  */
-    s->timer[0] = arm_timer_init(1000000);
-    s->timer[1] = arm_timer_init(1000000);
+    /* The timers are configurable between 32kHz and 1MHz
+     * defaulting to 1MHz but overrideable as individual properties */
+    s->timer[0] = arm_timer_init(s->freq0);
+    s->timer[1] = arm_timer_init(s->freq1);
+
     s->timer[0]->irq = qi[0];
     s->timer[1]->irq = qi[1];
     memory_region_init_io(&s->iomem, &sp804_ops, s, "sp804", 0x1000);
@@ -281,6 +285,16 @@ static int sp804_init(SysBusDevice *dev)
     return 0;
 }
 
+static SysBusDeviceInfo sp804_info = {
+    .init = sp804_init,
+    .qdev.name = "sp804",
+    .qdev.size = sizeof(sp804_state),
+    .qdev.props = (Property[]) {
+        DEFINE_PROP_UINT32("freq0", sp804_state, freq0, 1000000),
+        DEFINE_PROP_UINT32("freq1", sp804_state, freq1, 1000000),
+        DEFINE_PROP_END_OF_LIST(),
+    }
+};
 
 /* Integrator/CP timer module.  */
 
@@ -349,7 +363,7 @@ static int icp_pit_init(SysBusDevice *dev)
 static void arm_timer_register_devices(void)
 {
     sysbus_register_dev("integrator_pit", sizeof(icp_pit_state), icp_pit_init);
-    sysbus_register_dev("sp804", sizeof(sp804_state), sp804_init);
+    sysbus_register_withprop(&sp804_info);
 }
 
 device_init(arm_timer_register_devices)
-- 
1.7.1

[Qemu-devel] [PATCH 11/12] arm: add dummy gic security registers

[Peter Maydell]

From: Rob Herring <rob.herring@calxeda.com>

Implement handling for the RAZ/WI gic security registers.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm_gic.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/hw/arm_gic.c b/hw/arm_gic.c
index 9b52119..0339cf5 100644
--- a/hw/arm_gic.c
+++ b/hw/arm_gic.c
@@ -282,6 +282,10 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
             return ((GIC_NIRQ / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
         if (offset < 0x08)
             return 0;
+        if (offset >= 0x80) {
+            /* Interrupt Security , RAZ/WI */
+            return 0;
+        }
 #endif
         goto bad_reg;
     } else if (offset < 0x200) {
@@ -413,6 +417,8 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
             DPRINTF("Distribution %sabled\n", s->enabled ? "En" : "Dis");
         } else if (offset < 4) {
             /* ignored.  */
+        } else if (offset >= 0x80) {
+            /* Interrupt Security Registers, RAZ/WI */
         } else {
             goto bad_reg;
         }
-- 
1.7.1

[Qemu-devel] [PATCH 12/12] add L2x0/PL310 cache controller device

[Peter Maydell]

From: Rob Herring <rob.herring@calxeda.com>

This is just a dummy device for ARM L2 cache controllers, based on the
pl310. The cache type parameter can be defined by a property value
and has a meaningful default.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
[Peter Maydell: removed stray blank line at end]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 Makefile.target |    1 +
 hw/arm_l2x0.c   |  181 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 182 insertions(+), 0 deletions(-)
 create mode 100644 hw/arm_l2x0.c

diff --git a/Makefile.target b/Makefile.target
index 3261383..db5e44c 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -336,6 +336,7 @@ obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
 obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
 obj-arm-y += versatile_pci.o
 obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
+obj-arm-y += arm_l2x0.o
 obj-arm-y += arm_mptimer.o
 obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
 obj-arm-y += pl061.o
diff --git a/hw/arm_l2x0.c b/hw/arm_l2x0.c
new file mode 100644
index 0000000..2faed39
--- /dev/null
+++ b/hw/arm_l2x0.c
@@ -0,0 +1,181 @@
+/*
+ * ARM dummy L210, L220, PL310 cache controller.
+ *
+ * Copyright (c) 2010-2012 Calxeda
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or any later version, as published by the Free Software
+ * Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "sysbus.h"
+
+/* L2C-310 r3p2 */
+#define CACHE_ID 0x410000c8
+
+typedef struct l2x0_state {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    uint32_t cache_type;
+    uint32_t ctrl;
+    uint32_t aux_ctrl;
+    uint32_t data_ctrl;
+    uint32_t tag_ctrl;
+    uint32_t filter_start;
+    uint32_t filter_end;
+} l2x0_state;
+
+static const VMStateDescription vmstate_l2x0 = {
+    .name = "l2x0",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(ctrl, l2x0_state),
+        VMSTATE_UINT32(aux_ctrl, l2x0_state),
+        VMSTATE_UINT32(data_ctrl, l2x0_state),
+        VMSTATE_UINT32(tag_ctrl, l2x0_state),
+        VMSTATE_UINT32(filter_start, l2x0_state),
+        VMSTATE_UINT32(filter_end, l2x0_state),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+
+static uint64_t l2x0_priv_read(void *opaque, target_phys_addr_t offset,
+                               unsigned size)
+{
+    uint32_t cache_data;
+    l2x0_state *s = (l2x0_state *)opaque;
+    offset &= 0xfff;
+    if (offset >= 0x730 && offset < 0x800) {
+        return 0; /* cache ops complete */
+    }
+    switch (offset) {
+    case 0:
+        return CACHE_ID;
+    case 0x4:
+        /* aux_ctrl values affect cache_type values */
+        cache_data = (s->aux_ctrl & (7 << 17)) >> 15;
+        cache_data |= (s->aux_ctrl & (1 << 16)) >> 16;
+        return s->cache_type |= (cache_data << 18) | (cache_data << 6);
+    case 0x100:
+        return s->ctrl;
+    case 0x104:
+        return s->aux_ctrl;
+    case 0x108:
+        return s->tag_ctrl;
+    case 0x10C:
+        return s->data_ctrl;
+    case 0xC00:
+        return s->filter_start;
+    case 0xC04:
+        return s->filter_end;
+    case 0xF40:
+        return 0;
+    case 0xF60:
+        return 0;
+    case 0xF80:
+        return 0;
+    default:
+        fprintf(stderr, "l2x0_priv_read: Bad offset %x\n", (int)offset);
+        break;
+    }
+    return 0;
+}
+
+static void l2x0_priv_write(void *opaque, target_phys_addr_t offset,
+                            uint64_t value, unsigned size)
+{
+    l2x0_state *s = (l2x0_state *)opaque;
+    offset &= 0xfff;
+    if (offset >= 0x730 && offset < 0x800) {
+        /* ignore */
+        return;
+    }
+    switch (offset) {
+    case 0x100:
+        s->ctrl = value & 1;
+        break;
+    case 0x104:
+        s->aux_ctrl = value;
+        break;
+    case 0x108:
+        s->tag_ctrl = value;
+        break;
+    case 0x10C:
+        s->data_ctrl = value;
+        break;
+    case 0xC00:
+        s->filter_start = value;
+        break;
+    case 0xC04:
+        s->filter_end = value;
+        break;
+    case 0xF40:
+        return;
+    case 0xF60:
+        return;
+    case 0xF80:
+        return;
+    default:
+        fprintf(stderr, "l2x0_priv_write: Bad offset %x\n", (int)offset);
+        break;
+    }
+}
+
+static void l2x0_priv_reset(DeviceState *dev)
+{
+    l2x0_state *s = DO_UPCAST(l2x0_state, busdev.qdev, dev);
+
+    s->ctrl = 0;
+    s->aux_ctrl = 0x02020000;
+    s->tag_ctrl = 0;
+    s->data_ctrl = 0;
+    s->filter_start = 0;
+    s->filter_end = 0;
+}
+
+static const MemoryRegionOps l2x0_mem_ops = {
+    .read = l2x0_priv_read,
+    .write = l2x0_priv_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+ };
+
+static int l2x0_priv_init(SysBusDevice *dev)
+{
+    l2x0_state *s = FROM_SYSBUS(l2x0_state, dev);
+
+    memory_region_init_io(&s->iomem, &l2x0_mem_ops, s, "l2x0_cc", 0x1000);
+    sysbus_init_mmio(dev, &s->iomem);
+    return 0;
+}
+
+static SysBusDeviceInfo l2x0_info = {
+    .init = l2x0_priv_init,
+    .qdev.name = "l2x0",
+    .qdev.size = sizeof(l2x0_state),
+    .qdev.vmsd = &vmstate_l2x0,
+    .qdev.no_user = 1,
+    .qdev.props = (Property[]) {
+        DEFINE_PROP_UINT32("type", l2x0_state, cache_type, 0x1c100100),
+        DEFINE_PROP_END_OF_LIST(),
+    },
+    .qdev.reset = l2x0_priv_reset,
+};
+
+static void l2x0_register_device(void)
+{
+    sysbus_register_withprop(&l2x0_info);
+}
+
+device_init(l2x0_register_device)
-- 
1.7.1

Re: [Qemu-devel] [PULL 00/12] arm-devs queue

[Anthony Liguori]

On 01/04/2012 07:56 AM, Peter Maydell wrote:
> This is a pullreq for accumulated arm-devs patches; please pull.
>
> NB: over the Christmas break my usual workflow got a bit disrupted so
> I might have missed some patches; if there's anything that you were
> expecting to be in here but isn't, please ping, resubmit the patch, etc.
>
> -- PMM

Pulled.  Thanks.

Regards,

Anthony Liguori

>
>
> The following changes since commit f3c6a169a39d188e98c17a0a0ebfa7f85e5aafdd:
>
>    Merge remote-tracking branch 'qemu-kvm/memory/page_desc' into staging (2012-01-03 14:39:05 -0600)
>
> are available in the git repository at:
>
>    git://git.linaro.org/people/pmaydell/qemu-arm.git arm-devs.for-upstream
>
> Juha Riihimäki (3):
>        hw/omap1.c: Separate PWL from omap_mpu_state
>        hw/omap1.c: Separate PWT from omap_mpu_state
>        hw/omap1.c: Separate dpll_ctl from omap_mpu_state
>
> Mark Langsdorf (1):
>        arm: Set frequencies for arm_timer
>
> Peter Maydell (5):
>        hw/pl181.c: Add save/load support
>        hw/pl110.c: Add post-load hook to invalidate display
>        hw/omap1.c: omap_mpuio_init() need not be public
>        hw/omap1.c: Drop unused includes
>        hw/omap_gpmc: Fix region map/unmap when configuring prefetch engine
>
> Rob Herring (3):
>        arm: add missing scu registers
>        arm: add dummy gic security registers
>        add L2x0/PL310 cache controller device
>
>   Makefile.target |    1 +
>   hw/a9mpcore.c   |   36 ++++++++++-
>   hw/arm_gic.c    |    6 ++
>   hw/arm_l2x0.c   |  181 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>   hw/arm_timer.c  |   24 ++++++--
>   hw/omap.h       |   28 +--------
>   hw/omap1.c      |  151 +++++++++++++++++++++++++++-------------------
>   hw/omap_gpmc.c  |   30 +++++++---
>   hw/pl110.c      |   11 ++++
>   hw/pl181.c      |   49 ++++++++++++---
>   10 files changed, 404 insertions(+), 113 deletions(-)
>   create mode 100644 hw/arm_l2x0.c
>
>