From: yegorslists at googlemail.com <yegorslists@googlemail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/2] udev: bump to 181 and other fixes
Date: Tue, 7 Feb 2012 17:16:19 +0100 [thread overview]
Message-ID: <1328631380-12272-1-git-send-email-yegorslists@googlemail.com> (raw)
From: "Arnout Vandecappelle (Essensium/Mind)" <arnout@mind.be>
Changes:
- Linux kernel requirement: 2.6.34 and above (devtmpfs is mandatory)
(this also applies to the chosen toolchain, because of Kernel headers)
- optional dependency on libusb and usbutils removed
- added dependency on kmod
- added dependency on util-linux for libblkid
- install in /lib/udev instead of /usr/libexec/udev
- udevd moved to /lib/udev
- fixed path to pci.ids and usb.ids
- persistent rules generator is disabled by default, so option
is introduced to enable this option if desired
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
package/udev/Config.in | 26 +++++++++++++++++---------
package/udev/S10udev | 4 ++--
package/udev/udev.mk | 20 ++++++++++++--------
target/generic/Config.in | 2 ++
4 files changed, 33 insertions(+), 19 deletions(-)
diff --git a/package/udev/Config.in b/package/udev/Config.in
index 391c718..dfb4f0d 100644
--- a/package/udev/Config.in
+++ b/package/udev/Config.in
@@ -1,31 +1,39 @@
config BR2_PACKAGE_UDEV
bool "udev"
depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+ depends on BR2_LARGEFILE # util-linux
+ depends on BR2_USE_WCHAR # util-linux
+ select BR2_PACKAGE_UTIL_LINUX
+ select BR2_PACKAGE_UTIL_LINUX_LIBBLKID
+ select BR2_PACKAGE_KMOD
help
Userspace device daemon.
+ udev requires a Linux kernel >= 2.6.34: it relies on devtmpfs.
+
ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/
if BR2_PACKAGE_UDEV
+config BR2_PACKAGE_UDEV_RULES_GEN
+ bool "enable rules generator"
+ help
+ Enable persistant rules generator
+
config BR2_PACKAGE_UDEV_ALL_EXTRAS
bool "enable all extras"
- depends on BR2_LARGEFILE # acl
- depends on BR2_USE_WCHAR # libglib2
select BR2_PACKAGE_ACL
- select BR2_PACKAGE_LIBUSB
- select BR2_PACKAGE_LIBUSB_COMPAT
- select BR2_PACKAGE_USBUTILS
select BR2_PACKAGE_HWDATA
select BR2_PACKAGE_LIBGLIB2
help
Enable all extras with external dependencies like
- libacl, libusb, libusb-compat, usbutils, hwdata
-
-comment "udev extras requires a toolchain with LARGEFILE + WCHAR support"
- depends on !(BR2_LARGEFILE && BR2_USE_WCHAR)
+ libacl, hwdata and libglib2
endif
comment "udev requires /dev mgmnt set to udev under System configuration"
depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+
+comment "udev requires a toolchain with LARGEFILE + WCHAR support"
+ depends on !(BR2_LARGEFILE && BR2_USE_WCHAR)
+
diff --git a/package/udev/S10udev b/package/udev/S10udev
index 29eb107..70a7c34 100755
--- a/package/udev/S10udev
+++ b/package/udev/S10udev
@@ -2,7 +2,7 @@
#
# udev This is a minimal non-LSB version of a UDEV startup script. It
# was derived by stripping down the udev-058 LSB version for use
-# with buildroot on embedded hardware using Linux 2.6.12+ kernels.
+# with buildroot on embedded hardware using Linux 2.6.34+ kernels.
#
# You may need to customize this for your system's resource limits
# (including startup time!) and administration. For example, if
@@ -17,7 +17,7 @@
#
# Check for missing binaries
-UDEV_BIN=/sbin/udevd
+UDEV_BIN=/lib/udev/udevd
test -x $UDEV_BIN || exit 5
# Check for config file and read it
diff --git a/package/udev/udev.mk b/package/udev/udev.mk
index 1825396..88df268 100644
--- a/package/udev/udev.mk
+++ b/package/udev/udev.mk
@@ -3,7 +3,7 @@
# udev
#
#############################################################
-UDEV_VERSION = 173
+UDEV_VERSION = 181
UDEV_SOURCE = udev-$(UDEV_VERSION).tar.bz2
UDEV_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kernel/hotplug/
UDEV_INSTALL_STAGING = YES
@@ -11,20 +11,24 @@ UDEV_INSTALL_STAGING = YES
UDEV_CONF_OPT = \
--sbindir=/sbin \
--with-rootlibdir=/lib \
- --libexecdir=/lib/udev \
+ --libexecdir=/lib \
+ --with-usb-ids-path=/usr/share/hwdata/usb.ids \
+ --with-pci-ids-path=/usr/share/hwdata/pci.ids \
+ --with-firmware-path=/lib/firmware \
--disable-introspection
-UDEV_DEPENDENCIES = host-gperf host-pkg-config
+UDEV_DEPENDENCIES = host-gperf host-pkg-config util-linux kmod
+
+ifeq ($(BR2_PACKAGE_UDEV_RULES_GEN),y)
+UDEV_CONF_OPT += --enable-rule_generator
+endif
ifeq ($(BR2_PACKAGE_UDEV_ALL_EXTRAS),y)
-UDEV_DEPENDENCIES += libusb libusb-compat acl usbutils hwdata libglib2
-UDEV_CONF_OPT += \
- --with-pci-ids-path=$(TARGET_DIR)/usr/share/hwdata/pci.ids \
- --with-usb-ids-path=$(TARGET_DIR)/usr/share/hwdata/usb.ids \
+UDEV_DEPENDENCIES += acl usbutils hwdata libglib2
+UDEV_CONF_OPT += \
--enable-udev_acl
else
UDEV_CONF_OPT += \
- --disable-hwdb \
--disable-gudev
endif
diff --git a/target/generic/Config.in b/target/generic/Config.in
index a91de32..5334a4b 100644
--- a/target/generic/Config.in
+++ b/target/generic/Config.in
@@ -28,6 +28,8 @@ config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV
config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
bool "Dynamic using udev"
+ depends on BR2_LARGEFILE # udev
+ depends on BR2_USE_WCHAR # udev
select BR2_PACKAGE_UDEV
endchoice
--
1.7.5.4
next reply other threads:[~2012-02-07 16:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-07 16:16 yegorslists at googlemail.com [this message]
2012-02-07 16:16 ` [Buildroot] [PATCH 2/2] kmod: bump to 5 yegorslists at googlemail.com
2012-02-07 19:44 ` [Buildroot] [PATCH 1/2] udev: bump to 181 and other fixes Arnout Vandecappelle
2012-02-08 9:52 ` Yegor Yefremov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328631380-12272-1-git-send-email-yegorslists@googlemail.com \
--to=yegorslists@googlemail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.