* [PATCH 2/2 v2] powerpc: Abstract common define of signal multiplex control for qe
@ 2012-02-08 9:52 Zhicheng Fan
2012-02-08 9:52 ` [PATCH 1/2 v2] P1025RDB: Add Quicc Engine support Zhicheng Fan
0 siblings, 1 reply; 3+ messages in thread
From: Zhicheng Fan @ 2012-02-08 9:52 UTC (permalink / raw)
To: galak, linuxppc-dev; +Cc: Zhicheng Fan
From: Zhicheng Fan <b32736@freeescale.com>
The mpc85xx_rdb and mpc85xx_mds have commom define of signal multiplex for qe ,so
they need to go in common header, the patch abstract them to fsl_guts.h
Signed-off-by: Zhicheng Fan <b32736@freeescale.com>
---
arch/powerpc/include/asm/fsl_guts.h | 19 +++++++++++++++++++
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 7 ++-----
2 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h
index bebd124..efacfe3 100644
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ b/arch/powerpc/include/asm/fsl_guts.h
@@ -114,6 +114,25 @@ struct ccsr_guts_86xx {
__be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
} __attribute__ ((packed));
+#ifdef CONFIG_PPC_85xx
+
+/* Alternate function signal multiplex control */
+#define MPC85xx_PMUXCR_OFFSET 0x60
+#define MPC85xx_PMUXCR_QE0 0x00008000
+#define MPC85xx_PMUXCR_QE2 0x00002000
+#define MPC85xx_PMUXCR_QE3 0x00001000
+#define MPC85xx_PMUXCR_QE4 0x00000800
+#define MPC85xx_PMUXCR_QE5 0x00000400
+#define MPC85xx_PMUXCR_QE6 0x00000200
+#define MPC85xx_PMUXCR_QE7 0x00000100
+#define MPC85xx_PMUXCR_QE8 0x00000080
+#define MPC85xx_PMUXCR_QE9 0x00000040
+#define MPC85xx_PMUXCR_QE10 0x00000020
+#define MPC85xx_PMUXCR_QE11 0x00000010
+#define MPC85xx_PMUXCR_QE12 0x00000008
+
+#endif
+
#ifdef CONFIG_PPC_86xx
#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 1d15a0c..1bd339a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -51,6 +51,7 @@
#include <asm/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
+#include <asm/fsl_guts.h>
#include "smp.h"
#include "mpc85xx.h"
@@ -268,11 +269,7 @@ static void __init mpc85xx_mds_qe_init(void)
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) {
-#define MPC85xx_PMUXCR_OFFSET 0x60
-#define MPC85xx_PMUXCR_QE0 0x00008000
-#define MPC85xx_PMUXCR_QE3 0x00001000
-#define MPC85xx_PMUXCR_QE9 0x00000040
-#define MPC85xx_PMUXCR_QE12 0x00000008
+
static __be32 __iomem *pmuxcr;
np = of_find_node_by_name(NULL, "global-utilities");
--
1.7.0.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 1/2 v2] P1025RDB: Add Quicc Engine support
2012-02-08 9:52 [PATCH 2/2 v2] powerpc: Abstract common define of signal multiplex control for qe Zhicheng Fan
@ 2012-02-08 9:52 ` Zhicheng Fan
2012-02-09 16:17 ` Tabi Timur-B04825
0 siblings, 1 reply; 3+ messages in thread
From: Zhicheng Fan @ 2012-02-08 9:52 UTC (permalink / raw)
To: galak, linuxppc-dev; +Cc: Zhicheng Fan
From: Zhicheng Fan <b32736@freeescale.com>
Signed-off-by: Zhicheng Fan <b32736@freeescale.com>
---
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 80 ++++++++++++++++++++++++++++-
1 files changed, 79 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 1950076..4c27b3b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -26,6 +26,9 @@
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -47,6 +50,10 @@ void __init mpc85xx_rdb_pic_init(void)
struct mpic *mpic;
unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_QUICC_ENGINE
+ struct device_node *np;
+#endif
+
if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
mpic = mpic_alloc(NULL, 0,
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
@@ -62,6 +69,18 @@ void __init mpc85xx_rdb_pic_init(void)
BUG_ON(mpic == NULL);
mpic_init(mpic);
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (np) {
+ qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+ qe_ic_cascade_high_mpic);
+ of_node_put(np);
+
+ } else
+ pr_err("Could not find qe-ic node\n");
+#endif
+
}
/*
@@ -69,7 +88,7 @@ void __init mpc85xx_rdb_pic_init(void)
*/
static void __init mpc85xx_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
+#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
struct device_node *np;
#endif
@@ -85,6 +104,65 @@ static void __init mpc85xx_rdb_setup_arch(void)
#endif
mpc85xx_smp_init();
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!np) {
+ pr_err("Could not find Quicc Engine node\n");
+ goto qe_fail;
+ }
+
+ qe_reset();
+ of_node_put(np);
+
+ np = of_find_node_by_name(NULL, "par_io");
+ if (np) {
+ struct device_node *ucc;
+
+ par_io_init(np);
+ of_node_put(np);
+
+ for_each_node_by_name(ucc, "ucc")
+ par_io_of_config(ucc);
+
+ }
+ if (machine_is(p1025_rdb)) {
+
+ __be32 __iomem *pmuxcr;
+
+ np = of_find_node_by_name(NULL, "global-utilities");
+
+ if (np) {
+ pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
+
+ if (!pmuxcr)
+ pr_err(KERN_EMERG "Error: Alternate function"
+ " signal multiplex control register not"
+ " mapped!\n");
+ else {
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+ /* P1025 has pins muxed for QE and other functions. To
+ * enable QE UEC mode, we need to set bit QE0 for UCC1
+ * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+ * and QE12 for QE MII management singals in PMUXCR
+ * register.
+ */
+ setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
+ MPC85xx_PMUXCR_QE3 |
+ MPC85xx_PMUXCR_QE9 |
+ MPC85xx_PMUXCR_QE12);
+#endif
+ }
+
+ iounmap(pmuxcr);
+ of_node_put(np);
+ }
+
+ }
+
+qe_fail:
+#endif /* CONFIG_QUICC_ENGINE */
+
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
}
--
1.7.0.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2 v2] P1025RDB: Add Quicc Engine support
2012-02-08 9:52 ` [PATCH 1/2 v2] P1025RDB: Add Quicc Engine support Zhicheng Fan
@ 2012-02-09 16:17 ` Tabi Timur-B04825
0 siblings, 0 replies; 3+ messages in thread
From: Tabi Timur-B04825 @ 2012-02-09 16:17 UTC (permalink / raw)
To: Fan Zhicheng-B32736; +Cc: linuxppc-dev, Zhicheng Fan
> +#ifdef CONFIG_QUICC_ENGINE
> + =A0 =A0 =A0 np =3D of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> + =A0 =A0 =A0 if (np) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 qe_ic_casca=
de_high_mpic);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 of_node_put(np);
> +
> + =A0 =A0 =A0 } else
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 pr_err("Could not find qe-ic node\n");
Since you have to use pr_err instead of dev_err, please add a prefix
to the message. Like this:
pr_err("mpc85xx-rdb: could not find qe-ic node\n");
or maybe something like this:
pr_err("%s: could not find qe-ic node\n", __func__);
> + =A0 =A0 =A0 if (machine_is(p1025_rdb)) {
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 __be32 __iomem *pmuxcr;
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 np =3D of_find_node_by_name(NULL, "global-u=
tilities");
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (np) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 pmuxcr =3D of_iomap(np, 0) =
+ MPC85xx_PMUXCR_OFFSET;
Use the ccsr_guts_85xx structure instead of hard-coded offsets.
MPC85xx_PMUXCR_OFFSET should be deleted.
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (!pmuxcr)
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 pr_err(KERN=
_EMERG "Error: Alternate function"
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 " signal multiplex control register not"
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 " mapped!\n");
A missing node in the device tree is NOT an emergency. Also, the
KERN_xxx macros are not supposed to be used in a pr_xxx macro. Please
don't blindly copy/paste code from somewhere else without thinking
about it.
--=20
Timur Tabi
Linux kernel developer at Freescale=
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-02-09 16:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-02-08 9:52 [PATCH 2/2 v2] powerpc: Abstract common define of signal multiplex control for qe Zhicheng Fan
2012-02-08 9:52 ` [PATCH 1/2 v2] P1025RDB: Add Quicc Engine support Zhicheng Fan
2012-02-09 16:17 ` Tabi Timur-B04825
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.