[net 0/4][pull request] Intel Wired LAN Driver Updates

[net 0/4][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series of patches contains fixes for e1000, igb, igbvf, ixgb,
ixgbe and ixgbevf.

The following are changes since commit cc3425cdc04206f3c8b9efb2c693e89aa3cd9ec7:
  Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net master

Don Skidmore (2):
  ixgbe: fix typo in enumeration name
  ixgbe: update version number

Jiri Pirko (1):
  e1000: fix vlan processing regression

stephen hemminger (1):
  intel: make wired ethernet driver message level consistent (rev2)

 drivers/net/ethernet/intel/e1000/e1000_main.c     |   40 +++++++++++++--------
 drivers/net/ethernet/intel/e1000e/netdev.c        |    7 +++-
 drivers/net/ethernet/intel/igb/igb_main.c         |    7 +++-
 drivers/net/ethernet/intel/igbvf/netdev.c         |    7 +++-
 drivers/net/ethernet/intel/ixgb/ixgb_main.c       |    6 ++--
 drivers/net/ethernet/intel/ixgbe/ixgbe.h          |    2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     |   13 ++++---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |    7 +++-
 8 files changed, 60 insertions(+), 29 deletions(-)

-- 
1.7.7.6

[net 1/4] e1000: fix vlan processing regression

[Jeff Kirsher]

From: Jiri Pirko <jpirko@redhat.com>

This patch fixes a regression introduced by commit "e1000: do vlan
cleanup (799d531)".

Apparently some e1000 chips (not mine) are sensitive about the order of
setting vlan filter and vlan stripping/inserting functionality. So this
patch changes the order so it's the same as before vlan cleanup.

Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c |   35 +++++++++++++++---------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 0e9aec8..bcba9cf 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -164,6 +164,8 @@ static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
 static bool e1000_vlan_used(struct e1000_adapter *adapter);
 static void e1000_vlan_mode(struct net_device *netdev,
 			    netdev_features_t features);
+static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
+				     bool filter_on);
 static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
 static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
@@ -1214,7 +1216,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_register;
 
-	e1000_vlan_mode(netdev, netdev->features);
+	e1000_vlan_filter_on_off(adapter, false);
 
 	/* print bus type/speed/width info */
 	e_info(probe, "(PCI%s:%dMHz:%d-bit) %pM\n",
@@ -4770,6 +4772,22 @@ static bool e1000_vlan_used(struct e1000_adapter *adapter)
 	return false;
 }
 
+static void __e1000_vlan_mode(struct e1000_adapter *adapter,
+			      netdev_features_t features)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl;
+
+	ctrl = er32(CTRL);
+	if (features & NETIF_F_HW_VLAN_RX) {
+		/* enable VLAN tag insert/strip */
+		ctrl |= E1000_CTRL_VME;
+	} else {
+		/* disable VLAN tag insert/strip */
+		ctrl &= ~E1000_CTRL_VME;
+	}
+	ew32(CTRL, ctrl);
+}
 static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
 				     bool filter_on)
 {
@@ -4779,6 +4797,7 @@ static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
 	if (!test_bit(__E1000_DOWN, &adapter->flags))
 		e1000_irq_disable(adapter);
 
+	__e1000_vlan_mode(adapter, adapter->netdev->features);
 	if (filter_on) {
 		/* enable VLAN receive filtering */
 		rctl = er32(RCTL);
@@ -4799,24 +4818,14 @@ static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
 }
 
 static void e1000_vlan_mode(struct net_device *netdev,
-	netdev_features_t features)
+			    netdev_features_t features)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
-	u32 ctrl;
 
 	if (!test_bit(__E1000_DOWN, &adapter->flags))
 		e1000_irq_disable(adapter);
 
-	ctrl = er32(CTRL);
-	if (features & NETIF_F_HW_VLAN_RX) {
-		/* enable VLAN tag insert/strip */
-		ctrl |= E1000_CTRL_VME;
-	} else {
-		/* disable VLAN tag insert/strip */
-		ctrl &= ~E1000_CTRL_VME;
-	}
-	ew32(CTRL, ctrl);
+	__e1000_vlan_mode(adapter, features);
 
 	if (!test_bit(__E1000_DOWN, &adapter->flags))
 		e1000_irq_enable(adapter);
-- 
1.7.7.6

[net 2/4] intel: make wired ethernet driver message level consistent (rev2)

[Jeff Kirsher]

From: stephen hemminger <shemminger@vyatta.com>

Dan Carpenter noticed that ixgbevf initial default was different than
the rest. But the problem is broader than that, only one Intel driver (ixgb)
was doing it almost right.

The convention for default debug level should be consistent among
Intel drivers and follow established convention.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c     |    5 +++--
 drivers/net/ethernet/intel/e1000e/netdev.c        |    7 ++++++-
 drivers/net/ethernet/intel/igb/igb_main.c         |    7 ++++++-
 drivers/net/ethernet/intel/igbvf/netdev.c         |    7 ++++++-
 drivers/net/ethernet/intel/ixgb/ixgb_main.c       |    6 +++---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     |    9 ++++++---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |    7 +++++--
 7 files changed, 35 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index bcba9cf..4348b6f 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -217,7 +217,8 @@ MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
@@ -981,7 +982,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter = netdev_priv(netdev);
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
-	adapter->msg_enable = (1 << debug) - 1;
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 	adapter->bars = bars;
 	adapter->need_ioport = need_ioport;
 
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 7152eb1..2c38a65 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -60,6 +60,11 @@
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
 static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
 
 static const struct e1000_info *e1000_info_tbl[] = {
@@ -6172,7 +6177,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
 	adapter->max_hw_frame_size = ei->max_hw_frame_size;
-	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 
 	mmio_start = pci_resource_start(pdev, 0);
 	mmio_len = pci_resource_len(pdev, 0);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c490241..5ec3159 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -238,6 +238,11 @@ MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
 struct igb_reg_info {
 	u32 ofs;
 	char *name;
@@ -1893,7 +1898,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	adapter->pdev = pdev;
 	hw = &adapter->hw;
 	hw->back = adapter;
-	adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 
 	mmio_start = pci_resource_start(pdev, 0);
 	mmio_len = pci_resource_len(pdev, 0);
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 217c143..d61ca2a 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -55,6 +55,11 @@ static const char igbvf_driver_string[] =
 static const char igbvf_copyright[] =
 		  "Copyright (c) 2009 - 2012 Intel Corporation.";
 
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
 static int igbvf_poll(struct napi_struct *napi, int budget);
 static void igbvf_reset(struct igbvf_adapter *);
 static void igbvf_set_interrupt_capability(struct igbvf_adapter *);
@@ -2649,7 +2654,7 @@ static int __devinit igbvf_probe(struct pci_dev *pdev,
 	adapter->flags = ei->flags;
 	adapter->hw.back = adapter;
 	adapter->hw.mac.type = ei->mac;
-	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 
 	/* PCI config space info */
 
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
index 82aaa79..5fce363 100644
--- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -134,8 +134,8 @@ MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-#define DEFAULT_DEBUG_LEVEL_SHIFT 3
-static int debug = DEFAULT_DEBUG_LEVEL_SHIFT;
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
@@ -442,7 +442,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
 	adapter->hw.back = adapter;
-	adapter->msg_enable = netif_msg_init(debug, DEFAULT_DEBUG_LEVEL_SHIFT);
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 
 	adapter->hw.hw_addr = pci_ioremap_bar(pdev, BAR_0);
 	if (!adapter->hw.hw_addr) {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 398fc22..6dbad2b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -141,13 +141,16 @@ module_param(allow_unsupported_sfp, uint, 0);
 MODULE_PARM_DESC(allow_unsupported_sfp,
 		 "Allow unsupported and untested SFP+ modules on 82599-based adapters");
 
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
 MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-#define DEFAULT_DEBUG_LEVEL_SHIFT 3
-
 static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter)
 {
 	if (!test_bit(__IXGBE_DOWN, &adapter->state) &&
@@ -6834,7 +6837,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	adapter->pdev = pdev;
 	hw = &adapter->hw;
 	hw->back = adapter;
-	adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 
 	hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
 			      pci_resource_len(pdev, 0));
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 581c659..307611a 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -91,7 +91,10 @@ MODULE_DESCRIPTION("Intel(R) 82599 Virtual Function Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
 /* forward decls */
 static void ixgbevf_set_itr_msix(struct ixgbevf_q_vector *q_vector);
@@ -3367,7 +3370,7 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
 	adapter->pdev = pdev;
 	hw = &adapter->hw;
 	hw->back = adapter;
-	adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 
 	/*
 	 * call save state here in standalone driver because it relies on
-- 
1.7.7.6

[net 3/4] ixgbe: fix typo in enumeration name

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

This was pointed out to me by Xiaojun Zhang on Source Forge.

CC: Xiaojun Zhang <zhangxiaojun@sourceforge.net>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 80e26ff..74e1921 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -544,7 +544,7 @@ struct ixgbe_fdir_filter {
 	u16 action;
 };
 
-enum ixbge_state_t {
+enum ixgbe_state_t {
 	__IXGBE_TESTING,
 	__IXGBE_RESETTING,
 	__IXGBE_DOWN,
-- 
1.7.7.6

[net 4/4] ixgbe: update version number

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

Update the driver version number to better match version of out of tree
driver that has similar functionality.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 6dbad2b..3e26b1f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -63,8 +63,8 @@ static char ixgbe_default_device_descr[] =
 			      "Intel(R) 10 Gigabit Network Connection";
 #endif
 #define MAJ 3
-#define MIN 6
-#define BUILD 7
+#define MIN 8
+#define BUILD 21
 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
 	__stringify(BUILD) "-k"
 const char ixgbe_driver_version[] = DRV_VERSION;
-- 
1.7.7.6

Re: [net 0/4][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 27 Mar 2012 23:52:24 -0700

> This series of patches contains fixes for e1000, igb, igbvf, ixgb,
> ixgbe and ixgbevf.
> 
> The following are changes since commit cc3425cdc04206f3c8b9efb2c693e89aa3cd9ec7:
>   Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net master

Pulled, thanks Jeff.

[3.2.y] e1000: fix vlan processing regression

[Jonathan Nieder]

From: Jiri Pirko <jpirko@redhat.com>
Date: Tue, 20 Mar 2012 18:10:01 +0000

commit 52f5509fe8ccb607ff9b84ad618f244262336475 upstream.

This patch fixes a regression introduced by commit "e1000: do vlan
cleanup (799d531)".

Apparently some e1000 chips (not mine) are sensitive about the order of
setting vlan filter and vlan stripping/inserting functionality. So this
patch changes the order so it's the same as before vlan cleanup.

Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Andrey Jr. Melnikov <temnota@kmv.ru>
---
Hi Dave,

Would

 52f5509fe8cc e1000: fix vlan processing regression, 2012-03-20

be ok for 3.2.y?

It doesn't apply cleanly to kernels before v3.3-rc1~182^2~581 (net:
introduce and use netdev_features_t for device features sets) but a
backport is straightforward.  The patch is already in 3.3.y as
v3.3.6~52 (2012-05-12).  3.0.y doesn't need this because it doesn't
have 799d531.

Andrey (cc-ed) tested[1] this patch against a 3.2.23-based kernel and
found it to work ok.

Thoughts of all kinds welcome, as always.

Thanks,
Jonathan

[1] http://bugs.debian.org/690956

 drivers/net/ethernet/intel/e1000/e1000_main.c | 76 +++++++++++++++------------
 1 file changed, 42 insertions(+), 34 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index c5f6b0e60c39..6546191a5951 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -168,6 +168,8 @@ static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
 
 static bool e1000_vlan_used(struct e1000_adapter *adapter);
 static void e1000_vlan_mode(struct net_device *netdev, u32 features);
+static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
+				     bool filter_on);
 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
@@ -1219,7 +1221,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_register;
 
-	e1000_vlan_mode(netdev, netdev->features);
+	e1000_vlan_filter_on_off(adapter, false);
 
 	/* print bus type/speed/width info */
 	e_info(probe, "(PCI%s:%dMHz:%d-bit) %pM\n",
@@ -4553,43 +4555,11 @@ static bool e1000_vlan_used(struct e1000_adapter *adapter)
 	return false;
 }
 
-static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
-				     bool filter_on)
+static void __e1000_vlan_mode(struct e1000_adapter *adapter, u32 features)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u32 rctl;
-
-	if (!test_bit(__E1000_DOWN, &adapter->flags))
-		e1000_irq_disable(adapter);
-
-	if (filter_on) {
-		/* enable VLAN receive filtering */
-		rctl = er32(RCTL);
-		rctl &= ~E1000_RCTL_CFIEN;
-		if (!(adapter->netdev->flags & IFF_PROMISC))
-			rctl |= E1000_RCTL_VFE;
-		ew32(RCTL, rctl);
-		e1000_update_mng_vlan(adapter);
-	} else {
-		/* disable VLAN receive filtering */
-		rctl = er32(RCTL);
-		rctl &= ~E1000_RCTL_VFE;
-		ew32(RCTL, rctl);
-	}
-
-	if (!test_bit(__E1000_DOWN, &adapter->flags))
-		e1000_irq_enable(adapter);
-}
-
-static void e1000_vlan_mode(struct net_device *netdev, u32 features)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl;
 
-	if (!test_bit(__E1000_DOWN, &adapter->flags))
-		e1000_irq_disable(adapter);
-
 	ctrl = er32(CTRL);
 	if (features & NETIF_F_HW_VLAN_RX) {
 		/* enable VLAN tag insert/strip */
@@ -4599,6 +4569,44 @@ static void e1000_vlan_mode(struct net_device *netdev, u32 features)
 		ctrl &= ~E1000_CTRL_VME;
 	}
 	ew32(CTRL, ctrl);
+}
+static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
+				     bool filter_on)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+
+	if (!test_bit(__E1000_DOWN, &adapter->flags))
+		e1000_irq_disable(adapter);
+
+	__e1000_vlan_mode(adapter, adapter->netdev->features);
+	if (filter_on) {
+		/* enable VLAN receive filtering */
+		rctl = er32(RCTL);
+		rctl &= ~E1000_RCTL_CFIEN;
+		if (!(adapter->netdev->flags & IFF_PROMISC))
+			rctl |= E1000_RCTL_VFE;
+		ew32(RCTL, rctl);
+		e1000_update_mng_vlan(adapter);
+	} else {
+		/* disable VLAN receive filtering */
+		rctl = er32(RCTL);
+		rctl &= ~E1000_RCTL_VFE;
+		ew32(RCTL, rctl);
+	}
+
+	if (!test_bit(__E1000_DOWN, &adapter->flags))
+		e1000_irq_enable(adapter);
+}
+
+static void e1000_vlan_mode(struct net_device *netdev, u32 features)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	if (!test_bit(__E1000_DOWN, &adapter->flags))
+		e1000_irq_disable(adapter);
+
+	__e1000_vlan_mode(adapter, features);
 
 	if (!test_bit(__E1000_DOWN, &adapter->flags))
 		e1000_irq_enable(adapter);
-- 
1.8.0.rc2

Re: [3.2.y] e1000: fix vlan processing regression

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 663 bytes --]

On Tue, 2012-10-23 at 18:21 -0700, Jonathan Nieder wrote:
> From: Jiri Pirko <jpirko@redhat.com>
> Date: Tue, 20 Mar 2012 18:10:01 +0000
> 
> commit 52f5509fe8ccb607ff9b84ad618f244262336475 upstream.
> 
> This patch fixes a regression introduced by commit "e1000: do vlan
> cleanup (799d531)".
> 
> Apparently some e1000 chips (not mine) are sensitive about the order of
> setting vlan filter and vlan stripping/inserting functionality. So this
> patch changes the order so it's the same as before vlan cleanup.
[...]

Added to the queue, thanks.

Ben.

-- 
Ben Hutchings
Reality is just a crutch for people who can't handle science fiction.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]