* [PATCH 5/9] tty/serial/omap: console can only be built-in
@ 2012-04-02 22:32 mathieu.poirier
0 siblings, 0 replies; 6+ messages in thread
From: mathieu.poirier @ 2012-04-02 22:32 UTC (permalink / raw)
To: linux-serial; +Cc: arnd, tony
From: Arnd Bergmann <arnd@arndb.de>
When the omap serial driver is built as a module, we must
not allow the console driver to be selected, because consoles
can not be loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
---
drivers/tty/serial/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2de9924..bcf7e24 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1041,7 +1041,7 @@ config SERIAL_OMAP
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
- depends on SERIAL_OMAP
+ depends on SERIAL_OMAP=y
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
--
1.7.5.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 0/9] omap randconfig fixes for v3.3
@ 2012-03-23 17:13 mathieu.poirier
2012-03-23 17:13 ` mathieu.poirier
0 siblings, 1 reply; 6+ messages in thread
From: mathieu.poirier @ 2012-03-23 17:13 UTC (permalink / raw)
To: tony; +Cc: linux-omap, linux-arm-kernel, linux-kernel, arnd
From: "Arnd Bergmann" <arnd@arndb.de>
The following is a set of patches that have been sent
out during the 3.1 cycle that were not acked or merged.
Sending again for completeness.
Tony, please pull if there are no objections:
The following changes since commit c16fa4f2ad19908a47c63d8fa436a1178438c7e7:
Linux 3.3 (2012-03-18 16:15:34 -0700)
are available in the git repository at:
git://git.linaro.org/people/mpoirier/linux.git randconfig-omap
Arnd Bergmann (8):
arm/omap: enable building omap2 without omap2420/2430
omap: fix visibility of omap2_mbox_iva_priv
ARM: omap2+: fix building without i2c
tty/serial/omap: console can only be built-in
omap2: select twl4030 support on boards that need it
omap2plus: ensure that one of omap2/3/4 is selected
arm: OMAP depends on MMU
ARM: omap: select CPU_FREQ_TABLE where needed
Russell King (1):
ARM: omap2/n8x0: work around modular omap mmc
arch/arm/Kconfig | 1 +
arch/arm/mach-omap2/Kconfig | 19 +++++++++++++++++++
arch/arm/mach-omap2/board-n8x0.c | 6 ++++--
arch/arm/mach-omap2/mailbox.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +-
arch/arm/plat-omap/Kconfig | 5 +++++
arch/arm/plat-omap/include/plat/multi.h | 5 +++++
drivers/tty/serial/Kconfig | 2 +-
11 files changed, 40 insertions(+), 8 deletions(-)
--
1.7.5.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 5/9] tty/serial/omap: console can only be built-in
2012-03-23 17:13 [PATCH 0/9] omap randconfig fixes for v3.3 mathieu.poirier
2012-03-23 17:13 ` mathieu.poirier
@ 2012-03-23 17:13 ` mathieu.poirier
0 siblings, 0 replies; 6+ messages in thread
From: mathieu.poirier @ 2012-03-23 17:13 UTC (permalink / raw)
To: tony; +Cc: linux-omap, linux-arm-kernel, linux-kernel, arnd
From: Arnd Bergmann <arnd@arndb.de>
When the omap serial driver is built as a module, we must
not allow the console driver to be selected, because consoles
can not be loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
---
drivers/tty/serial/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2de9924..bcf7e24 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1041,7 +1041,7 @@ config SERIAL_OMAP
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
- depends on SERIAL_OMAP
+ depends on SERIAL_OMAP=y
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
--
1.7.5.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 5/9] tty/serial/omap: console can only be built-in
@ 2012-03-23 17:13 ` mathieu.poirier
0 siblings, 0 replies; 6+ messages in thread
From: mathieu.poirier at linaro.org @ 2012-03-23 17:13 UTC (permalink / raw)
To: linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
When the omap serial driver is built as a module, we must
not allow the console driver to be selected, because consoles
can not be loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
---
drivers/tty/serial/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2de9924..bcf7e24 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1041,7 +1041,7 @@ config SERIAL_OMAP
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
- depends on SERIAL_OMAP
+ depends on SERIAL_OMAP=y
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
--
1.7.5.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 5/9] tty/serial/omap: console can only be built-in
@ 2012-03-23 17:13 ` mathieu.poirier
0 siblings, 0 replies; 6+ messages in thread
From: mathieu.poirier @ 2012-03-23 17:13 UTC (permalink / raw)
To: tony; +Cc: linux-omap, arnd, linux-kernel, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
When the omap serial driver is built as a module, we must
not allow the console driver to be selected, because consoles
can not be loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
---
drivers/tty/serial/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2de9924..bcf7e24 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1041,7 +1041,7 @@ config SERIAL_OMAP
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
- depends on SERIAL_OMAP
+ depends on SERIAL_OMAP=y
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
--
1.7.5.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 5/9] tty/serial/omap: console can only be built-in
2012-03-23 17:13 ` mathieu.poirier
@ 2012-03-23 18:33 ` Tony Lindgren
-1 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2012-03-23 18:33 UTC (permalink / raw)
To: mathieu.poirier; +Cc: linux-omap, linux-arm-kernel, linux-kernel, arnd
* mathieu.poirier@linaro.org <mathieu.poirier@linaro.org> [120323 10:16]:
> From: Arnd Bergmann <arnd@arndb.de>
>
> When the omap serial driver is built as a module, we must
> not allow the console driver to be selected, because consoles
> can not be loadable modules.
Looks valid to me, this should get posted and merged via
linux-serial@vger.kernel.org.
Tony
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Acked-by: Govindraj.R <govindraj.raja@ti.com>
> ---
> drivers/tty/serial/Kconfig | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 2de9924..bcf7e24 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1041,7 +1041,7 @@ config SERIAL_OMAP
>
> config SERIAL_OMAP_CONSOLE
> bool "Console on OMAP serial port"
> - depends on SERIAL_OMAP
> + depends on SERIAL_OMAP=y
> select SERIAL_CORE_CONSOLE
> help
> Select this option if you would like to use omap serial port as
> --
> 1.7.5.4
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 5/9] tty/serial/omap: console can only be built-in
@ 2012-03-23 18:33 ` Tony Lindgren
0 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2012-03-23 18:33 UTC (permalink / raw)
To: linux-arm-kernel
* mathieu.poirier at linaro.org <mathieu.poirier@linaro.org> [120323 10:16]:
> From: Arnd Bergmann <arnd@arndb.de>
>
> When the omap serial driver is built as a module, we must
> not allow the console driver to be selected, because consoles
> can not be loadable modules.
Looks valid to me, this should get posted and merged via
linux-serial at vger.kernel.org.
Tony
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Acked-by: Govindraj.R <govindraj.raja@ti.com>
> ---
> drivers/tty/serial/Kconfig | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 2de9924..bcf7e24 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1041,7 +1041,7 @@ config SERIAL_OMAP
>
> config SERIAL_OMAP_CONSOLE
> bool "Console on OMAP serial port"
> - depends on SERIAL_OMAP
> + depends on SERIAL_OMAP=y
> select SERIAL_CORE_CONSOLE
> help
> Select this option if you would like to use omap serial port as
> --
> 1.7.5.4
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-04-02 22:32 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-02 22:32 [PATCH 5/9] tty/serial/omap: console can only be built-in mathieu.poirier
-- strict thread matches above, loose matches on Subject: below --
2012-03-23 17:13 [PATCH 0/9] omap randconfig fixes for v3.3 mathieu.poirier
2012-03-23 17:13 ` [PATCH 5/9] tty/serial/omap: console can only be built-in mathieu.poirier
2012-03-23 17:13 ` mathieu.poirier at linaro.org
2012-03-23 17:13 ` mathieu.poirier
2012-03-23 18:33 ` Tony Lindgren
2012-03-23 18:33 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.