* [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-04-10 1:03 ` Shinya Kuribayashi
2012-04-07 16:48 ` [PATCH 02/10] MIPS: Changes to configuration files for SEAD-3 platform Steven J. Hill
` (8 subsequent siblings)
9 siblings, 1 reply; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill, Douglas Leung, Chris Dearman
From: "Steven J. Hill" <sjhill@mips.com>
More information about the SEAD-3 platform can be found at
<http://www.mips.com/products/development-kits/mips-sead-3/>
on MTI's site. Currently, the M14K family of cores is what
the SEAD-3 is utilised with.
Signed-off-by: Douglas Leung <douglas@mips.com>
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
.../include/asm/mach-sead3/cpu-feature-overrides.h | 72 ++++
arch/mips/include/asm/mach-sead3/irq.h | 9 +
.../include/asm/mach-sead3/kernel-entry-init.h | 52 +++
arch/mips/include/asm/mach-sead3/war.h | 25 ++
arch/mips/include/asm/mips-boards/sead3int.h | 67 +++
arch/mips/mti-sead3/Makefile | 24 ++
arch/mips/mti-sead3/Platform | 7 +
arch/mips/mti-sead3/leds-sead3.c | 133 ++++++
arch/mips/mti-sead3/sead3-cmdline.c | 59 +++
arch/mips/mti-sead3/sead3-console.c | 52 +++
arch/mips/mti-sead3/sead3-display.c | 90 ++++
arch/mips/mti-sead3/sead3-ehci.c | 52 +++
arch/mips/mti-sead3/sead3-i2c-dev.c | 38 ++
arch/mips/mti-sead3/sead3-i2c.c | 42 ++
arch/mips/mti-sead3/sead3-init.c | 244 +++++++++++
arch/mips/mti-sead3/sead3-int.c | 146 +++++++
arch/mips/mti-sead3/sead3-lcd.c | 55 +++
arch/mips/mti-sead3/sead3-leds.c | 91 ++++
arch/mips/mti-sead3/sead3-memory.c | 178 ++++++++
arch/mips/mti-sead3/sead3-mtd.c | 58 +++
arch/mips/mti-sead3/sead3-net.c | 56 +++
arch/mips/mti-sead3/sead3-pic32-bus.c | 112 +++++
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c | 441 ++++++++++++++++++++
arch/mips/mti-sead3/sead3-platform.c | 49 +++
arch/mips/mti-sead3/sead3-reset.c | 64 +++
arch/mips/mti-sead3/sead3-setup.c | 49 +++
arch/mips/mti-sead3/sead3-smtc.c | 162 +++++++
arch/mips/mti-sead3/sead3-time.c | 145 +++++++
28 files changed, 2572 insertions(+)
create mode 100644 arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
create mode 100644 arch/mips/include/asm/mach-sead3/irq.h
create mode 100644 arch/mips/include/asm/mach-sead3/kernel-entry-init.h
create mode 100644 arch/mips/include/asm/mach-sead3/war.h
create mode 100644 arch/mips/include/asm/mips-boards/sead3int.h
create mode 100644 arch/mips/mti-sead3/Makefile
create mode 100644 arch/mips/mti-sead3/Platform
create mode 100644 arch/mips/mti-sead3/leds-sead3.c
create mode 100644 arch/mips/mti-sead3/sead3-cmdline.c
create mode 100644 arch/mips/mti-sead3/sead3-console.c
create mode 100644 arch/mips/mti-sead3/sead3-display.c
create mode 100644 arch/mips/mti-sead3/sead3-ehci.c
create mode 100644 arch/mips/mti-sead3/sead3-i2c-dev.c
create mode 100644 arch/mips/mti-sead3/sead3-i2c.c
create mode 100644 arch/mips/mti-sead3/sead3-init.c
create mode 100644 arch/mips/mti-sead3/sead3-int.c
create mode 100644 arch/mips/mti-sead3/sead3-lcd.c
create mode 100644 arch/mips/mti-sead3/sead3-leds.c
create mode 100644 arch/mips/mti-sead3/sead3-memory.c
create mode 100644 arch/mips/mti-sead3/sead3-mtd.c
create mode 100644 arch/mips/mti-sead3/sead3-net.c
create mode 100644 arch/mips/mti-sead3/sead3-pic32-bus.c
create mode 100644 arch/mips/mti-sead3/sead3-pic32-i2c-drv.c
create mode 100644 arch/mips/mti-sead3/sead3-platform.c
create mode 100644 arch/mips/mti-sead3/sead3-reset.c
create mode 100644 arch/mips/mti-sead3/sead3-setup.c
create mode 100644 arch/mips/mti-sead3/sead3-smtc.c
create mode 100644 arch/mips/mti-sead3/sead3-time.c
diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
new file mode 100644
index 0000000..7f3e3f9
--- /dev/null
+++ b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+/* #define cpu_has_fpu ? */
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#ifdef CONFIG_CPU_HAS_LLSC
+#define cpu_has_llsc 1
+#else
+#define cpu_has_llsc 0
+#endif
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+/* #define cpu_has_fpu ? */
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#define cpu_has_llsc 1
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h
new file mode 100644
index 0000000..652ea4c
--- /dev/null
+++ b/arch/mips/include/asm/mach-sead3/irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_MIPS_IRQ_H
+#define __ASM_MACH_MIPS_IRQ_H
+
+#define NR_IRQS 256
+
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h b/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
new file mode 100644
index 0000000..3dfbd8e
--- /dev/null
+++ b/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Chris Dearman (chris@mips.com)
+ * Copyright (C) 2007 Mips Technologies, Inc.
+ */
+#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+
+ .macro kernel_entry_setup
+#ifdef CONFIG_MIPS_MT_SMTC
+ mfc0 t0, CP0_CONFIG
+ bgez t0, 9f
+ mfc0 t0, CP0_CONFIG, 1
+ bgez t0, 9f
+ mfc0 t0, CP0_CONFIG, 2
+ bgez t0, 9f
+ mfc0 t0, CP0_CONFIG, 3
+ and t0, 1<<2
+ bnez t0, 0f
+9 :
+ /* Assume we came from YAMON... */
+ PTR_LA v0, 0x9fc00534 /* YAMON print */
+ lw v0, (v0)
+ move a0, zero
+ PTR_LA a1, nonmt_processor
+ jal v0
+
+ PTR_LA v0, 0x9fc00520 /* YAMON exit */
+ lw v0, (v0)
+ li a0, 1
+ jal v0
+
+1 : b 1b
+
+ __INITDATA
+nonmt_processor :
+ .asciz "SMTC kernel requires the MT ASE to run\n"
+ __FINIT
+0 :
+#endif
+ .endm
+
+/*
+ * Do SMP slave processor setup necessary before we can safely execute C code.
+ */
+ .macro smp_slave_setup
+ .endm
+
+#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-sead3/war.h b/arch/mips/include/asm/mach-sead3/war.h
new file mode 100644
index 0000000..7c6931d
--- /dev/null
+++ b/arch/mips/include/asm/mach-sead3/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 1
+#define MIPS_CACHE_SYNC_WAR 1
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h
new file mode 100644
index 0000000..2563b82
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/sead3int.h
@@ -0,0 +1,67 @@
+/*
+ * Douglas Leung, douglas@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines for the SEAD3 interrupt controller.
+ *
+ */
+#ifndef _MIPS_SEAD3INT_H
+#define _MIPS_SEAD3INT_H
+
+/*
+ * SEAD3 GIC's address space definitions
+ */
+#define GIC_BASE_ADDR 0x1b1c0000
+#define GIC_ADDRSPACE_SZ (128 * 1024)
+
+/* GIC's Nomenclature for Core Interrupt Pins on the SEAD3 */
+#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
+#define GIC_CPU_INT1 1 /* . */
+#define GIC_CPU_INT2 2 /* . */
+#define GIC_CPU_INT3 3 /* . */
+#define GIC_CPU_INT4 4 /* . */
+#define GIC_CPU_INT5 5 /* Core Interrupt 7 */
+
+/* SEAD3 GIC local interrupts */
+#define GIC_INT_TMR (GIC_CPU_INT5)
+#define GIC_INT_PERFCTR (GIC_CPU_INT5)
+
+/* SEAD3 GIC constants */
+/* Add 2 to convert non-eic hw int # to eic vector # */
+#define GIC_CPU_TO_VEC_OFFSET (2)
+
+/* GIC constants */
+/* If we map an intr to pin X, GIC will actually generate vector X+1 */
+#define GIC_PIN_TO_VEC_OFFSET (1)
+
+#define GIC_EXT_INTR(x) x
+
+/* Dummy data */
+#define X 0xdead
+
+/* External Interrupts used for IPI */
+/* Currently linux don't know about GIC => GIC base must be same as what Linux is using */
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 0)
+
+#ifndef __ASSEMBLY__
+extern void sead3int_init(void);
+#endif
+
+#endif /* !(_MIPS_SEAD3INT_H) */
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
new file mode 100644
index 0000000..8797977
--- /dev/null
+++ b/arch/mips/mti-sead3/Makefile
@@ -0,0 +1,24 @@
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+#
+# Copyright (C) 2008 Wind River Systems, Inc.
+# written by Ralf Baechle <ralf@linux-mips.org>
+#
+obj-y := sead3-lcd.o sead3-cmdline.o \
+ sead3-display.o sead3-init.o sead3-int.o \
+ sead3-mtd.o sead3-net.o \
+ sead3-memory.o sead3-platform.o \
+ sead3-reset.o sead3-setup.o sead3-time.o
+
+obj-y += sead3-i2c-dev.o sead3-i2c.o \
+ sead3-pic32-i2c-drv.o sead3-pic32-bus.o \
+ leds-sead3.o sead3-leds.o
+
+obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
+obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o
+
+# FIXME
+obj-$(CONFIG_MIPS_MT_SMTC) += sead3-smtc.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mti-sead3/Platform b/arch/mips/mti-sead3/Platform
new file mode 100644
index 0000000..596e484
--- /dev/null
+++ b/arch/mips/mti-sead3/Platform
@@ -0,0 +1,7 @@
+#
+# MIPS Sead3 board
+#
+platform-$(CONFIG_MIPS_SEAD3) += mti-sead3/
+cflags-$(CONFIG_MIPS_SEAD3) += -I$(srctree)/arch/mips/include/asm/mach-sead3
+load-$(CONFIG_MIPS_SEAD3) += 0xffffffff80100000
+all-$(CONFIG_MIPS_SEAD3) := $(COMPRESSION_FNAME).srec
diff --git a/arch/mips/mti-sead3/leds-sead3.c b/arch/mips/mti-sead3/leds-sead3.c
new file mode 100644
index 0000000..89954ce
--- /dev/null
+++ b/arch/mips/mti-sead3/leds-sead3.c
@@ -0,0 +1,133 @@
+/*
+ * LEDs driver for SEAD3
+ *
+ * Copyright (C) 2006 Kristian Kielhofner <kris@krisk.org>
+ *
+ * Based on leds-wrap.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+#define DRVNAME "sead3-led"
+
+static struct platform_device *pdev;
+
+static void sead3_pled_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ pr_debug("sead3_pled_set\n");
+ writel(value, (void __iomem *)0xBF000210); /* FIXME */
+}
+
+static void sead3_fled_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ pr_debug("sead3_fled_set\n");
+ writel(value, (void __iomem *)0xBF000218); /* FIXME */
+}
+
+static struct led_classdev sead3_pled = {
+ .name = "sead3::pled",
+ .brightness_set = sead3_pled_set,
+};
+
+static struct led_classdev sead3_fled = {
+ .name = "sead3::fled",
+ .brightness_set = sead3_fled_set,
+};
+
+#ifdef CONFIG_PM
+static int sead3_led_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+ led_classdev_suspend(&sead3_pled);
+ led_classdev_suspend(&sead3_fled);
+ return 0;
+}
+
+static int sead3_led_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&sead3_pled);
+ led_classdev_resume(&sead3_fled);
+ return 0;
+}
+#else
+#define sead3_led_suspend NULL
+#define sead3_led_resume NULL
+#endif
+
+static int sead3_led_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &sead3_pled);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &sead3_fled);
+ if (ret < 0)
+ led_classdev_unregister(&sead3_pled);
+
+ return ret;
+}
+
+static int sead3_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&sead3_pled);
+ led_classdev_unregister(&sead3_fled);
+ return 0;
+}
+
+static struct platform_driver sead3_led_driver = {
+ .probe = sead3_led_probe,
+ .remove = sead3_led_remove,
+ .suspend = sead3_led_suspend,
+ .resume = sead3_led_resume,
+ .driver = {
+ .name = DRVNAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init sead3_led_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&sead3_led_driver);
+ if (ret < 0)
+ goto out;
+
+ pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ platform_driver_unregister(&sead3_led_driver);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit sead3_led_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&sead3_led_driver);
+}
+
+module_init(sead3_led_init);
+module_exit(sead3_led_exit);
+
+MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>");
+MODULE_DESCRIPTION("SEAD3 LED driver");
+MODULE_LICENSE("GPL");
+
diff --git a/arch/mips/mti-sead3/sead3-cmdline.c b/arch/mips/mti-sead3/sead3-cmdline.c
new file mode 100644
index 0000000..8d6ad39
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-cmdline.c
@@ -0,0 +1,59 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+extern int prom_argc;
+extern int *_prom_argv;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+
+void __init prom_init_cmdline(void)
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while (actr < prom_argc) {
+ strcpy(cp, prom_argv(actr));
+ cp += strlen(prom_argv(actr));
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) {
+ /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+ }
+}
diff --git a/arch/mips/mti-sead3/sead3-console.c b/arch/mips/mti-sead3/sead3-console.c
new file mode 100644
index 0000000..a799a5d
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-console.c
@@ -0,0 +1,52 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+#include <asm/io.h>
+
+
+#define SEAD_UART1_REGS_BASE 0xbf000800 /* ttyS1 = RS232 port */
+#define SEAD_UART0_REGS_BASE 0xbf000900 /* ttyS0 = USB port */
+
+#define PORT(base_addr, offset) ((unsigned int __iomem *)(base_addr+(offset)*4))
+
+static inline unsigned int serial_in(int offset, unsigned int base_addr)
+{
+ return __raw_readl(PORT(base_addr, offset)) & 0xff;
+}
+
+static inline void serial_out(int offset, int value, unsigned int base_addr)
+{
+ __raw_writel(value, PORT(base_addr, offset));
+}
+
+int prom_putchar(char c, char port)
+{
+ unsigned int base_addr;
+
+ base_addr = port ? SEAD_UART1_REGS_BASE : SEAD_UART0_REGS_BASE;
+
+ while ((serial_in(UART_LSR, base_addr) & UART_LSR_THRE) == 0)
+ ;
+
+ serial_out(UART_TX, c, base_addr);
+
+ return 1;
+}
diff --git a/arch/mips/mti-sead3/sead3-display.c b/arch/mips/mti-sead3/sead3-display.c
new file mode 100644
index 0000000..f6e2231
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-display.c
@@ -0,0 +1,90 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/compiler.h>
+#include <linux/timer.h>
+#include <asm/io.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+
+extern const char display_string[];
+static unsigned int display_count;
+static unsigned int max_display_count;
+
+#define DISPLAY_LCDINSTRUCTION (0*2)
+#define DISPLAY_LCDDATA (1*2)
+#define DISPLAY_CPLDSTATUS (2*2)
+#define DISPLAY_CPLDDATA (3*2)
+#define LCD_SETDDRAM 0x80
+#define LCD_IR_BF 0x80
+
+static void lcd_wait(unsigned int __iomem *display)
+{
+ /* wait for CPLD state machine to become idle */
+ do {
+ } while (__raw_readl(display + DISPLAY_CPLDSTATUS) & 1);
+
+ do {
+ __raw_readl(display + DISPLAY_LCDINSTRUCTION);
+
+ /* wait for CPLD state machine to become idle */
+ do {
+ } while (__raw_readl(display + DISPLAY_CPLDSTATUS) & 1);
+ } while (__raw_readl(display + DISPLAY_CPLDDATA) & LCD_IR_BF);
+}
+
+void mips_display_message(const char *str)
+{
+ static unsigned int __iomem *display; /* static => auto initialized to NULL */
+ int i;
+ char ch;
+
+ if (unlikely(display == NULL))
+ display = ioremap_nocache(LCD_DISPLAY_POS_BASE, 4*2*sizeof(int));
+
+ for (i = 0; i < 16; i++) {
+ if (*str)
+ ch = *str++;
+ else
+ ch = ' ';
+ lcd_wait(display);
+ __raw_writel(LCD_SETDDRAM | i, display + DISPLAY_LCDINSTRUCTION);
+ lcd_wait(display);
+ __raw_writel(ch, display + DISPLAY_LCDDATA);
+ }
+}
+
+static void scroll_display_message(unsigned long data);
+static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0);
+
+static void scroll_display_message(unsigned long data)
+{
+ mips_display_message(&display_string[display_count++]);
+ if (display_count == max_display_count)
+ display_count = 0;
+
+ mod_timer(&mips_scroll_timer, jiffies + HZ);
+}
+
+void mips_scroll_message(void)
+{
+ del_timer_sync(&mips_scroll_timer);
+ max_display_count = strlen(display_string) + 1 - 16;
+ mod_timer(&mips_scroll_timer, jiffies + 1);
+}
diff --git a/arch/mips/mti-sead3/sead3-ehci.c b/arch/mips/mti-sead3/sead3-ehci.c
new file mode 100644
index 0000000..07aaa5d
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-ehci.c
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 MIPS Technologies, vInc.
+ * written by Chris Dearman (chris@mips.com)
+ *
+ * Probe driver for the SEAD3 EHCI device
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <irq.h>
+
+struct resource ehci_resources[] = {
+ {
+ .start = 0x1b200000,
+ .end = 0x1b200fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = MIPS_CPU_IRQ_BASE + 2,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ehci_device = {
+ .name = "ci13xxx-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &sead3_usbdev_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32)
+ },
+ .num_resources = ARRAY_SIZE(ehci_resources),
+ .resource = ehci_resources
+};
+
+static int __init ehci_init(void)
+{
+ return platform_device_register(&ehci_device);
+}
+
+module_init(ehci_init);
+
+MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EHCI probe driver for SEAD3");
diff --git a/arch/mips/mti-sead3/sead3-i2c-dev.c b/arch/mips/mti-sead3/sead3-i2c-dev.c
new file mode 100644
index 0000000..7e7a911
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-i2c-dev.c
@@ -0,0 +1,38 @@
+#define DEBUG
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+static struct i2c_board_info sead3_i2c_info2[] __initdata = {
+ {
+ I2C_BOARD_INFO("adt7476", 0x2c),
+ .irq = 0,
+ },
+ {
+ I2C_BOARD_INFO("m41t80", 0x68),
+ .irq = 0,
+ },
+};
+
+static int __init sead3_i2c_init(void)
+{
+ int err;
+
+ pr_debug("sead3_i2c_init\n");
+
+ err = i2c_register_board_info(2, sead3_i2c_info2,
+ ARRAY_SIZE(sead3_i2c_info2));
+ if (err < 0)
+ printk(KERN_ERR
+ "sead3-i2c-dev: cannot register board I2C devices\n");
+ return err;
+}
+
+arch_initcall(sead3_i2c_init);
diff --git a/arch/mips/mti-sead3/sead3-i2c.c b/arch/mips/mti-sead3/sead3-i2c.c
new file mode 100644
index 0000000..bf5f8d3
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-i2c.c
@@ -0,0 +1,42 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * written by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Probe driver for the SEAD3 network device
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <irq.h>
+
+
+struct resource i2c_resources[] = {
+ {
+ .start = 0x805200,
+ .end = 0x8053FF,
+ .flags = IORESOURCE_MEM
+ },
+};
+
+static struct platform_device i2c_device = {
+ .name = "i2c_pic32",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(i2c_resources),
+ .resource = i2c_resources
+};
+
+static int __init i2c_init(void)
+{
+ return platform_device_register(&i2c_device);
+}
+
+module_init(i2c_init);
+
+MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("I2C probe driver for SEAD3");
diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c
new file mode 100644
index 0000000..14e0c49
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-init.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * PROM library initialisation code.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/generic.h>
+
+int prom_argc;
+int *_prom_argv, *_prom_envp;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension, if running in 64-bit mode.
+ */
+#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
+
+int init_debug; /* global var => auto initialized to 0 */
+
+int mips_revision_corid;
+int mips_revision_sconid;
+
+char *prom_getenv(char *envname)
+{
+ /*
+ * Return a pointer to the given environment variable.
+ * In 64-bit mode: we're using 64-bit pointers, but all pointers
+ * in the PROM structures are only 32-bit, so we need some
+ * workarounds, if we are running in 64-bit mode.
+ */
+ int i, index = 0;
+
+ i = strlen(envname);
+
+ while (prom_envp(index)) {
+ if (strncmp(envname, prom_envp(index), i) == 0)
+ return prom_envp(index+1);
+ index += 2;
+ }
+
+ return NULL;
+}
+
+static inline unsigned char str2hexnum(unsigned char c)
+{
+ if (c >= '0' && c <= '9')
+ return c - '0';
+ if (c >= 'a' && c <= 'f')
+ return c - 'a' + 10;
+ return 0; /* foo */
+}
+
+static inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ unsigned char num;
+
+ if ((*str == '.') || (*str == ':'))
+ str++;
+ num = str2hexnum(*str++) << 4;
+ num |= (str2hexnum(*str++));
+ ea[i] = num;
+ }
+}
+
+int get_ethernet_addr(char *ethernet_addr)
+{
+ char *ethaddr_str;
+
+ ethaddr_str = prom_getenv("ethaddr");
+ if (!ethaddr_str) {
+ printk("ethaddr not set in boot prom\n");
+ return -1;
+ }
+ str2eaddr(ethernet_addr, ethaddr_str);
+
+ if (init_debug > 1) {
+ int i;
+ printk("get_ethernet_addr: ");
+ for (i = 0; i < 5; i++)
+ printk("%02x:", (unsigned char)*(ethernet_addr+i));
+ printk("%02x\n", *(ethernet_addr+i));
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static void __init console_config(void)
+{
+ char console_string[40];
+ int baud = 0;
+ char parity = '\0', bits = '\0', flow = '\0';
+ char *s;
+
+ if ((strstr(prom_getcmdline(), "console=")) == NULL) {
+ s = prom_getenv("modetty0");
+ if (s) {
+ while (*s >= '0' && *s <= '9')
+ baud = baud*10 + *s++ - '0';
+ if (*s == ',')
+ s++;
+ if (*s)
+ parity = *s++;
+ if (*s == ',')
+ s++;
+ if (*s)
+ bits = *s++;
+ if (*s == ',')
+ s++;
+ if (*s == 'h')
+ flow = 'r';
+ }
+ if (baud == 0)
+ baud = 38400;
+ if (parity != 'n' && parity != 'o' && parity != 'e')
+ parity = 'n';
+ if (bits != '7' && bits != '8')
+ bits = '8';
+ if (flow == '\0')
+ flow = 'r';
+ sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow);
+ strcat(prom_getcmdline(), console_string);
+ pr_info("Config serial console:%s\n", console_string);
+ }
+}
+#endif
+
+static void __init mips_nmi_setup(void)
+{
+ void *base;
+ extern char except_vec_nmi;
+
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa80) :
+ (void *)(CAC_BASE + 0x380);
+ memcpy(base, &except_vec_nmi, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+static void __init mips_ejtag_setup(void)
+{
+ void *base;
+ extern char except_vec_ejtag_debug;
+
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa00) :
+ (void *)(CAC_BASE + 0x300);
+ memcpy(base, &except_vec_ejtag_debug, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+extern struct plat_smp_ops msmtc_smp_ops;
+
+void __init prom_init(void)
+{
+ prom_argc = fw_arg0;
+ _prom_argv = (int *) fw_arg1;
+ _prom_envp = (int *) fw_arg2;
+
+ mips_display_message("LINUX");
+
+ mips_revision_corid = MIPS_REVISION_CORID;
+ mips_revision_sconid = MIPS_REVISION_SCONID;
+ if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) {
+ switch (mips_revision_corid) {
+ case MIPS_REVISION_CORID_QED_RM5261:
+ case MIPS_REVISION_CORID_CORE_LV:
+ case MIPS_REVISION_CORID_CORE_FPGA:
+ case MIPS_REVISION_CORID_CORE_FPGAR2:
+ mips_revision_sconid = MIPS_REVISION_SCON_GT64120;
+ break;
+ case MIPS_REVISION_CORID_CORE_EMUL_BON:
+ case MIPS_REVISION_CORID_BONITO64:
+ case MIPS_REVISION_CORID_CORE_20K:
+ mips_revision_sconid = MIPS_REVISION_SCON_BONITO;
+ break;
+ case MIPS_REVISION_CORID_CORE_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_24K:
+ /*
+ * SOCit/ROCit support is essentially identical
+ * but make an attempt to distinguish them
+ */
+ mips_revision_sconid = MIPS_REVISION_SCON_SOCIT;
+ break;
+ case MIPS_REVISION_CORID_CORE_FPGA3:
+ case MIPS_REVISION_CORID_CORE_FPGA4:
+ case MIPS_REVISION_CORID_CORE_FPGA5:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ default:
+ /* See above */
+ mips_revision_sconid = MIPS_REVISION_SCON_ROCIT;
+ break;
+ }
+ }
+
+ board_nmi_handler_setup = mips_nmi_setup;
+ board_ejtag_handler_setup = mips_ejtag_setup;
+
+ pr_info("\nLINUX started...\n");
+ prom_init_cmdline();
+ prom_meminit();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ console_config();
+#endif
+#ifdef CONFIG_MIPS_CMP
+ register_smp_ops(&cmp_smp_ops);
+#endif
+#ifdef CONFIG_MIPS_MT_SMP
+ register_smp_ops(&vsmp_smp_ops);
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+ register_smp_ops(&msmtc_smp_ops);
+#endif
+}
diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
new file mode 100644
index 0000000..4cd569e
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-int.c
@@ -0,0 +1,146 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines for generic manipulation of the interrupts found on the MIPS
+ * Malta board.
+ * The interrupt controller is located in the South Bridge a PIIX4 device
+ * with two internal 82C95 interrupt controllers.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/kernel.h>
+#include <linux/random.h>
+
+#include <asm/setup.h>
+#include <asm/traps.h>
+#include <asm/irq_cpu.h>
+#include <asm/irq_regs.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/sead3int.h>
+#include <asm/gic.h>
+
+#define SEAD_CONFIG_GIC_PRESENT_SHF (1)
+#define SEAD_CONFIG_GIC_PRESENT_MSK (1 << SEAD_CONFIG_GIC_PRESENT_SHF)
+#define SEAD_CONFIG_BASE (0x1B100110)
+#define SEAD_CONFIG_SIZE (4)
+
+int gic_present; /* global var => auto initialized to 0 */
+static unsigned long sead3_config_reg;
+
+/*
+ * This table defines the setup for each external GIC interrupt
+ * It is indexed by interrupt number
+ */
+#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
+ { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ /* The remainder of this table is initialised by fill_ipi_map */
+};
+
+/*
+ * Version of ffs that only looks at bits 8..15
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ return fls(pending) - CAUSEB_IP - 1;
+#else
+ unsigned int a0 = 7;
+ unsigned int t0;
+
+ t0 = pending & 0xf000;
+ t0 = t0 < 1;
+ t0 = t0 << 2;
+ a0 = a0 - t0;
+ pending = pending << t0;
+
+ t0 = pending & 0xc000;
+ t0 = t0 < 1;
+ t0 = t0 << 1;
+ a0 = a0 - t0;
+ pending = pending << t0;
+
+ t0 = pending & 0x8000;
+ t0 = t0 < 1;
+ /* t0 = t0 << 2; */
+ a0 = a0 - t0;
+ /* pending = pending << t0; */
+
+ return a0;
+#endif
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+ int irq;
+
+ irq = irq_ffs(pending);
+
+ if (irq >= 0)
+ do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+ else
+ spurious_interrupt();
+}
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ if (!cpu_has_veic) {
+ mips_cpu_irq_init();
+
+ if (cpu_has_vint) {
+ /* install generic handler */
+ for (i = 0; i < 8; i++)
+ set_vi_handler(i, plat_irq_dispatch);
+ }
+ }
+
+ sead3_config_reg = (unsigned long)ioremap_nocache(SEAD_CONFIG_BASE, SEAD_CONFIG_SIZE);
+ gic_present = (REG32(sead3_config_reg) & SEAD_CONFIG_GIC_PRESENT_MSK) >>
+ SEAD_CONFIG_GIC_PRESENT_SHF;
+ printk("GIC: %spresent\n", (gic_present) ? "" : "not ");
+ printk("EIC: %s\n", (current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off");
+
+ if (gic_present) {
+ gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
+ ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+ }
+}
+
diff --git a/arch/mips/mti-sead3/sead3-lcd.c b/arch/mips/mti-sead3/sead3-lcd.c
new file mode 100644
index 0000000..654b447
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-lcd.c
@@ -0,0 +1,55 @@
+/*
+ * Registration of Sead3 LCD platform device.
+ *
+ * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+static struct resource sead3_lcd_resource __initdata = {
+ .start = 0x1f000400,
+ .end = 0x1f00041f,
+ .flags = IORESOURCE_MEM,
+};
+
+static __init int sead3_lcd_add(void)
+{
+ struct platform_device *pdev;
+ int retval;
+
+ pdev = platform_device_alloc("cobalt-lcd", -1);
+ if (!pdev)
+ return -ENOMEM;
+
+ retval = platform_device_add_resources(pdev, &sead3_lcd_resource, 1);
+ if (retval)
+ goto err_free_device;
+
+ retval = platform_device_add(pdev);
+ if (retval)
+ goto err_free_device;
+
+ return 0;
+
+err_free_device:
+ platform_device_put(pdev);
+
+ return retval;
+}
+device_initcall(sead3_lcd_add);
diff --git a/arch/mips/mti-sead3/sead3-leds.c b/arch/mips/mti-sead3/sead3-leds.c
new file mode 100644
index 0000000..ff003d2
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-leds.c
@@ -0,0 +1,91 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 MIPS Technologies, Inc.
+ * written by Chris Dearman (chris@mips.com)
+ *
+ * Probe driver for the SEAD3 LED devices
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <irq.h>
+
+
+#define LEDFLAGS(bits, shift) \
+ ((bits << 8) | (shift << 8))
+
+#define LEDBITS(id, shift, bits) \
+ .name = id #shift, \
+ .flags = LEDFLAGS(bits, shift)
+
+struct led_info led_data_info[] = {
+ { LEDBITS("bit", 0, 1) },
+ { LEDBITS("bit", 1, 1) },
+ { LEDBITS("bit", 2, 1) },
+ { LEDBITS("bit", 3, 1) },
+ { LEDBITS("bit", 4, 1) },
+ { LEDBITS("bit", 5, 1) },
+ { LEDBITS("bit", 6, 1) },
+ { LEDBITS("bit", 7, 1) },
+ { LEDBITS("all", 0, 8) },
+};
+
+static struct led_platform_data led_data = {
+ .num_leds = ARRAY_SIZE(led_data_info),
+ .leds = led_data_info
+};
+
+static struct resource pled_resources[] = {
+ {
+ .start = 0x1F000210,
+ .end = 0x1F000217,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device pled_device = {
+ .name = "sead3::pled",
+ .id = 0,
+ .dev = {
+ .platform_data = &led_data,
+ },
+ .num_resources = ARRAY_SIZE(pled_resources),
+ .resource = pled_resources
+};
+
+
+static struct resource fled_resources[] = {
+ {
+ .start = 0x1F000218,
+ .end = 0x1F00021f,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device fled_device = {
+ .name = "sead3::fled",
+ .id = 0,
+ .dev = {
+ .platform_data = &led_data,
+ },
+ .num_resources = ARRAY_SIZE(fled_resources),
+ .resource = fled_resources
+};
+
+
+static int __init led_init(void)
+{
+ platform_device_register(&pled_device);
+ return platform_device_register(&fled_device);
+}
+
+module_init(led_init);
+
+MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LED probe driver for SEAD3");
diff --git a/arch/mips/mti-sead3/sead3-memory.c b/arch/mips/mti-sead3/sead3-memory.c
new file mode 100644
index 0000000..b27419c
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-memory.c
@@ -0,0 +1,178 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * PROM library functions for acquiring/using memory descriptors given to
+ * us from the YAMON.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mips-boards/prom.h>
+
+/*#define DEBUG*/
+
+enum yamon_memtypes {
+ yamon_dontuse,
+ yamon_prom,
+ yamon_free,
+};
+static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+#ifdef DEBUG
+static char *mtypes[3] = {
+ "Dont use memory",
+ "YAMON PROM memory",
+ "Free memmory",
+};
+#endif
+
+/* determined physical memory size, not overridden by command line args */
+unsigned long physical_memsize = 0L;
+
+static struct prom_pmemblock * __init prom_getmdesc(void)
+{
+ char *memsize_str;
+ unsigned int memsize;
+ char *ptr;
+ static char cmdline[COMMAND_LINE_SIZE] __initdata;
+
+ /* otherwise look in the environment */
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ printk(KERN_WARNING
+ "memsize not set in boot prom, set to default (32Mb)\n");
+ physical_memsize = 0x02000000;
+ } else {
+#ifdef DEBUG
+ pr_debug("prom_memsize = %s\n", memsize_str);
+#endif
+ physical_memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
+ word of physical memory */
+ physical_memsize -= PAGE_SIZE;
+#endif
+
+ /* Check the command line for a memsize directive that overrides
+ the physical/default amount */
+ strcpy(cmdline, arcs_cmdline);
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr)
+ memsize = memparse(ptr + 8, &ptr);
+ else
+ memsize = physical_memsize;
+
+ memset(mdesc, 0, sizeof(mdesc));
+
+ mdesc[0].type = yamon_dontuse;
+ mdesc[0].base = 0x00000000;
+ mdesc[0].size = 0x00001000;
+
+ mdesc[1].type = yamon_prom;
+ mdesc[1].base = 0x00001000;
+ mdesc[1].size = 0x000ef000;
+
+ /*
+ * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
+ * south bridge and PCI access always forwarded to the ISA Bus and
+ * BIOSCS# is always generated.
+ * This mean that this area can't be used as DMA memory for PCI
+ * devices.
+ */
+ mdesc[2].type = yamon_dontuse;
+ mdesc[2].base = 0x000f0000;
+ mdesc[2].size = 0x00010000;
+
+ mdesc[3].type = yamon_dontuse;
+ mdesc[3].base = 0x00100000;
+ mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base;
+
+ mdesc[4].type = yamon_free;
+ mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end));
+ mdesc[4].size = memsize - mdesc[4].base;
+
+ return &mdesc[0];
+}
+
+static int __init prom_memtype_classify(unsigned int type)
+{
+ switch (type) {
+ case yamon_free:
+ return BOOT_MEM_RAM;
+ case yamon_prom:
+ return BOOT_MEM_ROM_DATA;
+ default:
+ return BOOT_MEM_RESERVED;
+ }
+}
+
+void __init prom_meminit(void)
+{
+ struct prom_pmemblock *p;
+
+#ifdef DEBUG
+ pr_debug("YAMON MEMORY DESCRIPTOR dump:\n");
+ p = prom_getmdesc();
+ while (p->size) {
+ int i = 0;
+ pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n",
+ i, p, p->base, p->size, mtypes[p->type]);
+ p++;
+ i++;
+ }
+#endif
+ p = prom_getmdesc();
+
+ while (p->size) {
+ long type;
+ unsigned long base, size;
+
+ type = prom_memtype_classify(p->type);
+ base = p->base;
+ size = p->size;
+
+ add_memory_region(base, size, type);
+ p++;
+ }
+}
+
+void __init prom_free_prom_memory(void)
+{
+ unsigned long addr;
+ int i;
+
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+ continue;
+
+ addr = boot_mem_map.map[i].addr;
+ free_init_pages("prom memory",
+ addr, addr + boot_mem_map.map[i].size);
+ }
+}
diff --git a/arch/mips/mti-sead3/sead3-mtd.c b/arch/mips/mti-sead3/sead3-mtd.c
new file mode 100644
index 0000000..30450b4
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-mtd.c
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 MIPS Technologies, Inc.
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <mtd/mtd-abi.h>
+
+static struct mtd_partition sead3_mtd_partitions[] = {
+ {
+ .name = "User FS",
+ .offset = 0x00000000,
+ .size = 0x01fc0000,
+ }, {
+ .name = "Board Config",
+ .offset = 0x01fc0000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE
+ },
+};
+
+static struct physmap_flash_data sead3_flash_data = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(sead3_mtd_partitions),
+ .parts = sead3_mtd_partitions
+};
+
+static struct resource sead3_flash_resource = {
+ .start = 0x1c000000,
+ .end = 0x1dffffff,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device sead3_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sead3_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &sead3_flash_resource,
+};
+
+static int __init sead3_mtd_init(void)
+{
+ platform_device_register(&sead3_flash);
+
+ return 0;
+}
+
+module_init(sead3_mtd_init)
diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c
new file mode 100644
index 0000000..1a5018d
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-net.c
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007-2011 MIPS Technologies, Inc.
+ * written by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Probe driver for the SEAD3 network device
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <irq.h>
+
+static struct smsc911x_platform_config net_data = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+struct resource net_resources[] = {
+ {
+ .start = 0x1f010000,
+ .end = 0x1f01ffff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = MIPS_CPU_IRQ_BASE + 6,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device net_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .dev = {
+ .platform_data = &net_data,
+ },
+ .num_resources = ARRAY_SIZE(net_resources),
+ .resource = net_resources
+};
+
+static int __init net_init(void)
+{
+ return platform_device_register(&net_device);
+}
+
+module_init(net_init);
+
+MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Network probe driver for SEAD3");
diff --git a/arch/mips/mti-sead3/sead3-pic32-bus.c b/arch/mips/mti-sead3/sead3-pic32-bus.c
new file mode 100644
index 0000000..b0bb326
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-pic32-bus.c
@@ -0,0 +1,112 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#define PIC32_NULL 0x00
+#define PIC32_RD 0x01
+#define PIC32_SYSRD 0x02
+#define PIC32_WR 0x10
+#define PIC32_SYSWR 0x20
+#define PIC32_IRQ_CLR 0x40
+#define PIC32_STATUS 0x80
+
+#define DELAY() udelay(100) /* FIXME: needed? */
+
+/* spinlock to ensure atomic access to PIC32 */
+static DEFINE_SPINLOCK(pic32_bus_lock);
+
+/* FIXME: io_remap these */
+static void __iomem *bus_xfer = (void __iomem *)0xbf000600;
+static void __iomem *bus_status = (void __iomem *)0xbf000060;
+
+static inline unsigned int ioready(void)
+{
+ return readl(bus_status) & 1;
+}
+
+static inline void wait_ioready(void)
+{
+ do { } while (!ioready());
+}
+
+static inline void wait_ioclear(void)
+{
+ do { } while (ioready());
+}
+
+static inline void check_ioclear(void)
+{
+ if (ioready()) {
+ pr_debug("ioclear: initially busy\n");
+ do {
+ (void) readl(bus_xfer);
+ DELAY();
+ } while (ioready());
+ pr_debug("ioclear: cleared busy\n");
+ }
+}
+
+u32 pic32_bus_readl(u32 reg)
+{
+ unsigned long flags;
+ u32 status, val;
+
+ spin_lock_irqsave(&pic32_bus_lock, flags);
+
+ check_ioclear();
+
+ writel((PIC32_RD << 24) | (reg & 0x00ffffff), bus_xfer);
+ DELAY();
+ wait_ioready();
+ status = readl(bus_xfer);
+ DELAY();
+ val = readl(bus_xfer);
+ wait_ioclear();
+
+ pr_debug("pic32_bus_readl: *%x -> %x (status=%x)\n", reg, val, status);
+
+ spin_unlock_irqrestore(&pic32_bus_lock, flags);
+
+ return val;
+}
+
+void pic32_bus_writel(u32 val, u32 reg)
+{
+ unsigned long flags;
+ u32 status;
+
+ spin_lock_irqsave(&pic32_bus_lock, flags);
+
+ check_ioclear();
+
+ writel((PIC32_WR << 24) | (reg & 0x00ffffff), bus_xfer);
+ DELAY();
+ writel(val, bus_xfer);
+ DELAY();
+ wait_ioready();
+ status = readl(bus_xfer);
+ wait_ioclear();
+
+ pr_debug("pic32_bus_writel: *%x <- %x (status=%x)\n", reg, val, status);
+
+ spin_unlock_irqrestore(&pic32_bus_lock, flags);
+}
diff --git a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c
new file mode 100644
index 0000000..053b23e
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c
@@ -0,0 +1,441 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+#define PIC32_I2CxCON 0x0000
+#define PIC32_I2CxCONCLR 0x0004
+#define PIC32_I2CxCONSET 0x0008
+#define PIC32_I2CxCONINV 0x000C
+#define I2CCON_ON (1<<15)
+#define I2CCON_FRZ (1<<14)
+#define I2CCON_SIDL (1<<13)
+#define I2CCON_SCLREL (1<<12)
+#define I2CCON_STRICT (1<<11)
+#define I2CCON_A10M (1<<10)
+#define I2CCON_DISSLW (1<<9)
+#define I2CCON_SMEN (1<<8)
+#define I2CCON_GCEN (1<<7)
+#define I2CCON_STREN (1<<6)
+#define I2CCON_ACKDT (1<<5)
+#define I2CCON_ACKEN (1<<4)
+#define I2CCON_RCEN (1<<3)
+#define I2CCON_PEN (1<<2)
+#define I2CCON_RSEN (1<<1)
+#define I2CCON_SEN (1<<0)
+
+#define PIC32_I2CxSTAT 0x0010
+#define PIC32_I2CxSTATCLR 0x0014
+#define PIC32_I2CxSTATSET 0x0018
+#define PIC32_I2CxSTATINV 0x001C
+#define I2CSTAT_ACKSTAT (1<<15)
+#define I2CSTAT_TRSTAT (1<<14)
+#define I2CSTAT_BCL (1<<10)
+#define I2CSTAT_GCSTAT (1<<9)
+#define I2CSTAT_ADD10 (1<<8)
+#define I2CSTAT_IWCOL (1<<7)
+#define I2CSTAT_I2COV (1<<6)
+#define I2CSTAT_DA (1<<5)
+#define I2CSTAT_P (1<<4)
+#define I2CSTAT_S (1<<3)
+#define I2CSTAT_RW (1<<2)
+#define I2CSTAT_RBF (1<<1)
+#define I2CSTAT_TBF (1<<0)
+
+#define PIC32_I2CxADD 0x0020
+#define PIC32_I2CxADDCLR 0x0024
+#define PIC32_I2CxADDSET 0x0028
+#define PIC32_I2CxADDINV 0x002C
+#define PIC32_I2CxMSK 0x0030
+#define PIC32_I2CxMSKCLR 0x0034
+#define PIC32_I2CxMSKSET 0x0038
+#define PIC32_I2CxMSKINV 0x003C
+#define PIC32_I2CxBRG 0x0040
+#define PIC32_I2CxBRGCLR 0x0044
+#define PIC32_I2CxBRGSET 0x0048
+#define PIC32_I2CxBRGINV 0x004C
+#define PIC32_I2CxTRN 0x0050
+#define PIC32_I2CxTRNCLR 0x0054
+#define PIC32_I2CxTRNSET 0x0058
+#define PIC32_I2CxTRNINV 0x005C
+#define PIC32_I2CxRCV 0x0060
+
+struct i2c_platform_data {
+ u32 base;
+ struct i2c_adapter adap;
+ u32 xfer_timeout;
+ u32 ack_timeout;
+ u32 ctl_timeout;
+};
+
+extern u32 pic32_bus_readl(u32 reg);
+extern void pic32_bus_writel(u32 val, u32 reg);
+
+static inline void
+StartI2C(struct i2c_platform_data *adap)
+{
+ pr_debug("StartI2C\n");
+ pic32_bus_writel(I2CCON_SEN, adap->base + PIC32_I2CxCONSET);
+}
+
+static inline void
+StopI2C(struct i2c_platform_data *adap)
+{
+ pr_debug("StopI2C\n");
+ pic32_bus_writel(I2CCON_PEN, adap->base + PIC32_I2CxCONSET);
+}
+
+static inline void
+AckI2C(struct i2c_platform_data *adap)
+{
+ pr_debug("AckI2C\n");
+ pic32_bus_writel(I2CCON_ACKDT, adap->base + PIC32_I2CxCONCLR);
+ pic32_bus_writel(I2CCON_ACKEN, adap->base + PIC32_I2CxCONSET);
+}
+
+static inline void
+NotAckI2C(struct i2c_platform_data *adap)
+{
+ pr_debug("NakI2C\n");
+ pic32_bus_writel(I2CCON_ACKDT, adap->base + PIC32_I2CxCONSET);
+ pic32_bus_writel(I2CCON_ACKEN, adap->base + PIC32_I2CxCONSET);
+}
+
+static inline int
+IdleI2C(struct i2c_platform_data *adap)
+{
+ int i;
+
+ pr_debug("IdleI2C\n");
+ for (i = 0; i < adap->ctl_timeout; i++) {
+ if (((pic32_bus_readl(adap->base + PIC32_I2CxCON) &
+ (I2CCON_ACKEN|I2CCON_RCEN|I2CCON_PEN|I2CCON_RSEN|I2CCON_SEN)) == 0) &&
+ ((pic32_bus_readl(adap->base + PIC32_I2CxSTAT) &
+ (I2CSTAT_TRSTAT)) == 0))
+ return 0;
+ udelay(1);
+ }
+ return -ETIMEDOUT;
+}
+
+static inline u32
+MasterWriteI2C(struct i2c_platform_data *adap, u32 byte)
+{
+ pr_debug("MasterWriteI2C\n");
+
+ pic32_bus_writel(byte, adap->base + PIC32_I2CxTRN);
+
+ return pic32_bus_readl(adap->base + PIC32_I2CxSTAT) & I2CSTAT_IWCOL;
+}
+
+static inline u32
+MasterReadI2C(struct i2c_platform_data *adap)
+{
+ pr_debug("MasterReadI2C\n");
+
+ pic32_bus_writel(I2CCON_RCEN, adap->base + PIC32_I2CxCONSET);
+
+ while (pic32_bus_readl(adap->base + PIC32_I2CxCON) & I2CCON_RCEN)
+ ;
+
+ pic32_bus_writel(I2CSTAT_I2COV, adap->base + PIC32_I2CxSTATCLR);
+
+ return pic32_bus_readl(adap->base + PIC32_I2CxRCV);
+}
+
+static int
+do_address(struct i2c_platform_data *adap, unsigned int addr, int rd)
+{
+ pr_debug("doaddress\n");
+
+ IdleI2C(adap);
+ StartI2C(adap);
+ IdleI2C(adap);
+
+ addr <<= 1;
+ if (rd)
+ addr |= 1;
+
+ if (MasterWriteI2C(adap, addr))
+ return -EIO;
+ IdleI2C(adap);
+ if (pic32_bus_readl(adap->base + PIC32_I2CxSTAT) & I2CSTAT_ACKSTAT)
+ return -EIO;
+ return 0;
+}
+
+static int
+i2c_read(struct i2c_platform_data *adap, unsigned char *buf,
+ unsigned int len)
+{
+ int i;
+ u32 data;
+
+ pr_debug("i2c_read\n");
+
+ i = 0;
+ while (i < len) {
+ data = MasterReadI2C(adap);
+ buf[i++] = data;
+ if (i < len)
+ AckI2C(adap);
+ else
+ NotAckI2C(adap);
+ }
+
+ StopI2C(adap);
+ IdleI2C(adap);
+ return 0;
+}
+
+static int
+i2c_write(struct i2c_platform_data *adap, unsigned char *buf,
+ unsigned int len)
+{
+ int i;
+ u32 data;
+
+ pr_debug("i2c_write\n");
+
+ i = 0;
+ while (i < len) {
+ data = buf[i];
+ if (MasterWriteI2C(adap, data))
+ return -EIO;
+ IdleI2C(adap);
+ if (pic32_bus_readl(adap->base + PIC32_I2CxSTAT) & I2CSTAT_ACKSTAT)
+ return -EIO;
+ i++;
+ }
+
+ StopI2C(adap);
+ IdleI2C(adap);
+ return 0;
+}
+
+static int
+platform_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
+{
+ struct i2c_platform_data *adap = i2c_adap->algo_data;
+ struct i2c_msg *p;
+ int i, err = 0;
+
+ pr_debug("platform_xfer\n");
+ for (i = 0; i < num; i++) {
+#define __BUFSIZE 80
+ int ii;
+ static char buf[__BUFSIZE];
+ char *b = buf;
+
+ p = &msgs[i];
+ b += sprintf(buf, " [%d bytes]", p->len);
+ if ((p->flags & I2C_M_RD) == 0) {
+ for (ii = 0; ii < p->len; ii++) {
+ if (b < &buf[__BUFSIZE-4]) {
+ b += sprintf(b, " %02x", p->buf[ii]);
+ } else {
+ strcat(b, "...");
+ break;
+ }
+ }
+ }
+ pr_debug("xfer%d: DevAddr: %04x Op:%s Data:%s\n", i, p->addr,
+ (p->flags & I2C_M_RD) ? "Rd" : "Wr", buf);
+ }
+
+
+ for (i = 0; !err && i < num; i++) {
+ p = &msgs[i];
+ err = do_address(adap, p->addr, p->flags & I2C_M_RD);
+ if (err || !p->len)
+ continue;
+ if (p->flags & I2C_M_RD)
+ err = i2c_read(adap, p->buf, p->len);
+ else
+ err = i2c_write(adap, p->buf, p->len);
+ }
+
+ /* Return the number of messages processed, or the error code. */
+ if (err == 0)
+ err = num;
+
+ return err;
+}
+
+static u32
+platform_func(struct i2c_adapter *adap)
+{
+ pr_debug("platform_algo\n");
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm platform_algo = {
+ .master_xfer = platform_xfer,
+ .functionality = platform_func,
+};
+
+static void i2c_platform_setup(struct i2c_platform_data *priv)
+{
+ pr_debug("i2c_platform_setup\n");
+
+ pic32_bus_writel(500, priv->base + PIC32_I2CxBRG);
+ pic32_bus_writel(I2CCON_ON, priv->base + PIC32_I2CxCONCLR);
+ pic32_bus_writel(I2CCON_ON, priv->base + PIC32_I2CxCONSET);
+ pic32_bus_writel(I2CSTAT_BCL|I2CSTAT_IWCOL, priv->base + PIC32_I2CxSTATCLR);
+}
+
+static void i2c_platform_disable(struct i2c_platform_data *priv)
+{
+ pr_debug("i2c_platform_disable\n");
+}
+
+static int __devinit
+i2c_platform_probe(struct platform_device *pdev)
+{
+ struct i2c_platform_data *priv;
+ struct resource *r;
+ int ret;
+
+ pr_debug("i2c_platform_probe\n");
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ priv = kzalloc(sizeof(struct i2c_platform_data), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* FIXME: need to allocate resource in PIC32 space */
+#if 0
+ priv->base = bus_request_region(r->start, resource_size(r),
+ pdev->name);
+#else
+ priv->base = r->start;
+#endif
+ if (!priv->base) {
+ ret = -EBUSY;
+ goto out_mem;
+ }
+
+ priv->xfer_timeout = 200;
+ priv->ack_timeout = 200;
+ priv->ctl_timeout = 200;
+
+ priv->adap.nr = pdev->id;
+ priv->adap.algo = &platform_algo;
+ priv->adap.algo_data = priv;
+ priv->adap.dev.parent = &pdev->dev;
+ strlcpy(priv->adap.name, "PIC32 I2C", sizeof(priv->adap.name));
+
+ i2c_platform_setup(priv);
+
+ ret = i2c_add_numbered_adapter(&priv->adap);
+ if (ret == 0) {
+ platform_set_drvdata(pdev, priv);
+ return 0;
+ }
+
+ i2c_platform_disable(priv);
+
+out_mem:
+ kfree(priv);
+out:
+ return ret;
+}
+
+static int __devexit
+i2c_platform_remove(struct platform_device *pdev)
+{
+ struct i2c_platform_data *priv = platform_get_drvdata(pdev);
+
+ pr_debug("i2c_platform_remove\n");
+ platform_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&priv->adap);
+ i2c_platform_disable(priv);
+ kfree(priv);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+i2c_platform_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct i2c_platform_data *priv = platform_get_drvdata(pdev);
+
+ dev_dbg(&pdev->dev, "i2c_platform_disable\n");
+ i2c_platform_disable(priv);
+
+ return 0;
+}
+
+static int
+i2c_platform_resume(struct platform_device *pdev)
+{
+ struct i2c_platform_data *priv = platform_get_drvdata(pdev);
+
+ dev_dbg(&pdev->dev, "i2c_platform_setup\n");
+ i2c_platform_setup(priv);
+
+ return 0;
+}
+#else
+#define i2c_platform_suspend NULL
+#define i2c_platform_resume NULL
+#endif
+
+static struct platform_driver i2c_platform_driver = {
+ .driver = {
+ .name = "i2c_pic32",
+ .owner = THIS_MODULE,
+ },
+ .probe = i2c_platform_probe,
+ .remove = __devexit_p(i2c_platform_remove),
+ .suspend = i2c_platform_suspend,
+ .resume = i2c_platform_resume,
+};
+
+static int __init
+i2c_platform_init(void)
+{
+ pr_debug("i2c_platform_init\n");
+ return platform_driver_register(&i2c_platform_driver);
+}
+
+static void __exit
+i2c_platform_exit(void)
+{
+ pr_debug("i2c_platform_exit\n");
+ platform_driver_unregister(&i2c_platform_driver);
+}
+
+MODULE_AUTHOR("Chris Dearman, MIPS Technologies INC.");
+MODULE_DESCRIPTION("PIC32 I2C driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_platform_init);
+module_exit(i2c_platform_exit);
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
new file mode 100644
index 0000000..ddd28f6
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-platform.c
@@ -0,0 +1,49 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * written by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Probe driver for the SEAD3 UART ports
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define UART(base, int) \
+{ \
+ .mapbase = base, \
+ .irq = int, \
+ .uartclk = 14745600, \
+ .iotype = UPIO_MEM32, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
+ .regshift = 2, \
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+ UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4), /* ttyS0 = USB */
+ UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4), /* ttyS1 = RS232 */
+ { },
+};
+
+static struct platform_device uart8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = uart8250_data,
+ },
+};
+
+static int __init uart8250_init(void)
+{
+ return platform_device_register(&uart8250_device);
+}
+
+module_init(uart8250_init);
+
+MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("8250 UART probe driver for SEAD3");
diff --git a/arch/mips/mti-sead3/sead3-reset.c b/arch/mips/mti-sead3/sead3-reset.c
new file mode 100644
index 0000000..4aec9f9
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-reset.c
@@ -0,0 +1,64 @@
+#define DEBUG
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Reset the MIPS boards.
+ *
+ */
+#include <linux/init.h>
+#include <linux/pm.h>
+
+#include <asm/io.h>
+#include <asm/reboot.h>
+
+#define SOFTRES_REG 0x1F000050
+#define GORESET 0x4D
+
+static void mips_machine_restart(char *command);
+static void mips_machine_halt(void);
+
+static void mips_machine_restart(char *command)
+{
+ unsigned int __iomem *softres_reg =
+ ioremap(SOFTRES_REG, sizeof(unsigned int));
+
+ __raw_writel(GORESET, softres_reg);
+}
+
+static void mips_machine_halt(void)
+{
+ unsigned int __iomem *softres_reg =
+ ioremap(SOFTRES_REG, sizeof(unsigned int));
+
+ __raw_writel(GORESET, softres_reg);
+}
+
+
+static int __init mips_reboot_setup(void)
+{
+ _machine_restart = mips_machine_restart;
+ _machine_halt = mips_machine_halt;
+ pm_power_off = mips_machine_halt;
+
+ return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
new file mode 100644
index 0000000..1ddd4c3
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -0,0 +1,49 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2008 Dmitri Vorobiev
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/screen_info.h>
+#include <linux/time.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/traps.h>
+
+int coherentio; /* init to 0 => no DMA cache coherency (may be set by user) */
+int hw_coherentio; /* init to 0 => no HW DMA cache coherency (reflects real HW) */
+
+const char *get_system_type(void)
+{
+ return "MIPS SEAD3";
+}
+
+#if defined(CONFIG_MIPS_MT_SMTC)
+const char display_string[] = " SMTC LINUX ON SEAD3 ";
+#else
+const char display_string[] = " LINUX ON SEAD3 ";
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void __init plat_mem_setup(void)
+{
+}
diff --git a/arch/mips/mti-sead3/sead3-smtc.c b/arch/mips/mti-sead3/sead3-smtc.c
new file mode 100644
index 0000000..192cfd2
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-smtc.c
@@ -0,0 +1,162 @@
+/*
+ * Malta Platform-specific hooks for SMP operation
+ */
+#include <linux/irq.h>
+#include <linux/init.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/smtc.h>
+#include <asm/smtc_ipi.h>
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+static void msmtc_send_ipi_single(int cpu, unsigned int action)
+{
+ /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+ smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+}
+
+static void msmtc_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu(i, mask)
+ msmtc_send_ipi_single(i, action);
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+static void __cpuinit msmtc_init_secondary(void)
+{
+ void smtc_init_secondary(void);
+ int myvpe;
+
+ /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
+ myvpe = read_c0_tcbind() & TCBIND_CURVPE;
+ if (myvpe != 0) {
+ /* Ideally, this should be done only once per VPE, but... */
+ clear_c0_status(ST0_IM);
+ set_c0_status((0x100 << cp0_compare_irq)
+ | (0x100 << MIPS_CPU_IPI_IRQ));
+ if (cp0_perfcount_irq >= 0)
+ set_c0_status(0x100 << cp0_perfcount_irq);
+ }
+
+ smtc_init_secondary();
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+static void __cpuinit msmtc_boot_secondary(int cpu, struct task_struct *idle)
+{
+ smtc_boot_secondary(cpu, idle);
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+static void __cpuinit msmtc_smp_finish(void)
+{
+ smtc_smp_finish();
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+static void msmtc_cpus_done(void)
+{
+}
+
+/*
+ * Platform SMP pre-initialization
+ *
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
+ */
+
+static void __init msmtc_smp_setup(void)
+{
+ /*
+ * we won't get the definitive value until
+ * we've run smtc_prepare_cpus later, but
+ * we would appear to need an upper bound now.
+ */
+ smp_num_siblings = smtc_build_cpu_map(0);
+}
+
+static void __init msmtc_prepare_cpus(unsigned int max_cpus)
+{
+ smtc_prepare_cpus(max_cpus);
+}
+
+struct plat_smp_ops msmtc_smp_ops = {
+ .send_ipi_single = msmtc_send_ipi_single,
+ .send_ipi_mask = msmtc_send_ipi_mask,
+ .init_secondary = msmtc_init_secondary,
+ .smp_finish = msmtc_smp_finish,
+ .cpus_done = msmtc_cpus_done,
+ .boot_secondary = msmtc_boot_secondary,
+ .smp_setup = msmtc_smp_setup,
+ .prepare_cpus = msmtc_prepare_cpus,
+};
+
+#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
+/*
+ * IRQ affinity hook
+ */
+
+
+int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
+{
+ cpumask_t tmask;
+ int cpu = 0;
+ void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff);
+
+ /*
+ * On the legacy Malta development board, all I/O interrupts
+ * are routed through the 8259 and combined in a single signal
+ * to the CPU daughterboard, and on the CoreFPGA2/3 34K models,
+ * that signal is brought to IP2 of both VPEs. To avoid racing
+ * concurrent interrupt service events, IP2 is enabled only on
+ * one VPE, by convention VPE0. So long as no bits are ever
+ * cleared in the affinity mask, there will never be any
+ * interrupt forwarding. But as soon as a program or operator
+ * sets affinity for one of the related IRQs, we need to make
+ * sure that we don't ever try to forward across the VPE boundry,
+ * at least not until we engineer a system where the interrupt
+ * _ack() or _end() function can somehow know that it corresponds
+ * to an interrupt taken on another VPE, and perform the appropriate
+ * restoration of Status.IM state using MFTR/MTTR instead of the
+ * normal local behavior. We also ensure that no attempt will
+ * be made to forward to an offline "CPU".
+ */
+
+ cpumask_copy(&tmask, affinity);
+ for_each_cpu(cpu, affinity) {
+ if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu))
+ cpu_clear(cpu, tmask);
+ }
+ cpumask_copy(irq_desc[irq].affinity, &tmask);
+
+ if (cpus_empty(tmask))
+ /*
+ * We could restore a default mask here, but the
+ * runtime code can anyway deal with the null set
+ */
+ printk(KERN_WARNING
+ "IRQ affinity leaves no legal CPU for IRQ %d\n", irq);
+
+ /* Do any generic SMTC IRQ affinity setup */
+ smtc_set_irq_affinity(irq, tmask);
+
+ return 0;
+}
+#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
new file mode 100644
index 0000000..a31dd35
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3-time.c
@@ -0,0 +1,145 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+
+#include <asm/setup.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/msc01_ic.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+
+unsigned long cpu_khz;
+
+static int mips_cpu_timer_irq;
+static int mips_cpu_perf_irq;
+extern int cp0_perfcount_irq;
+
+static void mips_timer_dispatch(void)
+{
+ do_IRQ(mips_cpu_timer_irq);
+}
+
+static void mips_perf_dispatch(void)
+{
+ do_IRQ(mips_cpu_perf_irq);
+}
+
+static void __iomem *status_reg = (void __iomem *)0xbf000410;
+
+/*
+ * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect
+ */
+static unsigned int __init estimate_cpu_frequency(void)
+{
+ unsigned int prid = read_c0_prid() & 0xffff00;
+ unsigned int tick = 0;
+ unsigned int freq;
+ unsigned int orig;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ orig = readl(status_reg) & 0x2; /* get original sample */
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+
+ write_c0_count(0);
+
+ /* wait 1 second (the sampling clock transitions every 10ms) */
+ while (tick < 100) {
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+ tick++;
+ }
+
+ freq = read_c0_count();
+
+ local_irq_restore(flags);
+
+ mips_hpt_frequency = freq;
+
+ /* Adjust for processor */
+ if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+ (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+ freq *= 2;
+
+ freq += 5000; /* rounding */
+ freq -= freq%10000;
+
+ return freq ;
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+ ts->tv_sec = 0; /* FIXME - i2c is not up yet => can't access RTC */
+ ts->tv_nsec = 0;
+}
+
+static void __init plat_perf_setup(void)
+{
+ if (cp0_perfcount_irq >= 0) {
+ if (cpu_has_vint)
+ set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
+ mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ }
+}
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+ if (cpu_has_vint)
+ set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+ return mips_cpu_timer_irq;
+}
+
+void __init plat_time_init(void)
+{
+ unsigned int est_freq;
+
+ est_freq = estimate_cpu_frequency();
+
+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+ (est_freq%1000000)*100/1000000);
+
+ cpu_khz = est_freq / 1000;
+
+ mips_scroll_message();
+
+ plat_perf_setup();
+}
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
2012-04-07 16:48 ` [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform Steven J. Hill
@ 2012-04-10 1:03 ` Shinya Kuribayashi
2012-05-07 20:16 ` Hill, Steven
0 siblings, 1 reply; 23+ messages in thread
From: Shinya Kuribayashi @ 2012-04-10 1:03 UTC (permalink / raw)
To: sjhill; +Cc: linux-mips, ralf, douglas, chris
Hello,
On 4/8/2012 1:48 AM, Steven J. Hill wrote:
> diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
> new file mode 100644
> index 0000000..7f3e3f9
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
> @@ -0,0 +1,72 @@
[...]
> +/*
> + * CPU feature overrides for MIPS boards
> + */
> +#ifdef CONFIG_CPU_MIPS32
> +#define cpu_has_tlb 1
> +#define cpu_has_4kex 1
> +#define cpu_has_4k_cache 1
> +/* #define cpu_has_fpu ? */
> +/* #define cpu_has_32fpr ? */
> +#define cpu_has_counter 1
> +/* #define cpu_has_watch ? */
> +#define cpu_has_divec 1
> +#define cpu_has_vce 0
> +/* #define cpu_has_cache_cdex_p ? */
> +/* #define cpu_has_cache_cdex_s ? */
> +/* #define cpu_has_prefetch ? */
> +#define cpu_has_mcheck 1
> +/* #define cpu_has_ejtag ? */
> +#ifdef CONFIG_CPU_HAS_LLSC
> +#define cpu_has_llsc 1
> +#else
> +#define cpu_has_llsc 0
> +#endif
This Ralf's commit maybe be still valid for sead3 board?
http://git.kernel.org/linus/b8d6f78cd058e34ec706f7cb353fdb2eb743c050
MIPS: Malta: Remove pointless use use of CONFIG_CPU_HAS_LLSC
> +/* #define cpu_has_vtag_icache ? */
> +/* #define cpu_has_dc_aliases ? */
> +/* #define cpu_has_ic_fills_f_dc ? */
> +#define cpu_has_nofpuex 0
> +/* #define cpu_has_64bits ? */
> +/* #define cpu_has_64bit_zero_reg ? */
> +/* #define cpu_has_inclusive_pcaches ? */
> +#define cpu_icache_snoops_remote_store 1
> +#endif
Also you might be interested in fls/ffs optimization using CLO/CLZ
instruction, that will be used in irq_ffs() at plat_irq_dispatch:
https://patchwork.linux-mips.org/patch/1453/
MIPS: Enable cpu_has_clo_clz for MIPS Technologies' platforms
Some discussions on this is found at:
http://www.linux-mips.org/archives/linux-mips/2010-07/msg00000.html
> diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
> new file mode 100644
> index 0000000..4cd569e
> --- /dev/null
> +++ b/arch/mips/mti-sead3/sead3-int.c
> @@ -0,0 +1,146 @@
[...]
> +/*
> + * Version of ffs that only looks at bits 8..15
> + */
> +static inline unsigned int irq_ffs(unsigned int pending)
> +{
> +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
> + return fls(pending) - CAUSEB_IP - 1;
> +#else
> + unsigned int a0 = 7;
> + unsigned int t0;
> +
> + t0 = pending & 0xf000;
> + t0 = t0 < 1;
> + t0 = t0 << 2;
> + a0 = a0 - t0;
> + pending = pending << t0;
> +
> + t0 = pending & 0xc000;
> + t0 = t0 < 1;
> + t0 = t0 << 1;
> + a0 = a0 - t0;
> + pending = pending << t0;
> +
> + t0 = pending & 0x8000;
> + t0 = t0 < 1;
> + /* t0 = t0 << 2; */
> + a0 = a0 - t0;
> + /* pending = pending << t0; */
> +
> + return a0;
> +#endif
> +}
> +
> +asmlinkage void plat_irq_dispatch(void)
> +{
> + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
> + int irq;
> +
> + irq = irq_ffs(pending);
> +
> + if (irq >= 0)
> + do_IRQ(MIPS_CPU_IRQ_BASE + irq);
> + else
> + spurious_interrupt();
> +}
--
Shinya Kuribayashi
Renesas Electronics
^ permalink raw reply [flat|nested] 23+ messages in thread* RE: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
2012-04-10 1:03 ` Shinya Kuribayashi
@ 2012-05-07 20:16 ` Hill, Steven
2012-05-08 4:01 ` Shinya Kuribayashi
2012-05-08 11:16 ` Maciej W. Rozycki
0 siblings, 2 replies; 23+ messages in thread
From: Hill, Steven @ 2012-05-07 20:16 UTC (permalink / raw)
To: Shinya Kuribayashi; +Cc: linux-mips, ralf, Leung, Douglas, Dearman, Chris
Kuribayashi-san,
I will certainly remove CONFIG_CPU_HAS_LLSC, thank you. I attempted to enable 'cpu_has_clo_clz' for SEAD-3, but it breaks my microMIPS-only kernel builds. Specifically, since microMIPS LL/SC instructions do not have 16-bit address offsets, in the '__cmpxchg_asm' macro function I get constraint errors because then the assembler has to use the %LO register in order to calculate the offset address. I am going to hold off on enabling the option until after the 3.5 release and then revisit for a solution. Thank you.
-Steve
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
2012-05-07 20:16 ` Hill, Steven
@ 2012-05-08 4:01 ` Shinya Kuribayashi
2012-05-08 11:16 ` Maciej W. Rozycki
1 sibling, 0 replies; 23+ messages in thread
From: Shinya Kuribayashi @ 2012-05-08 4:01 UTC (permalink / raw)
To: sjhill; +Cc: linux-mips, ralf, douglas, chris
Hi Steven-san,
On 5/8/2012 5:16 AM, Hill, Steven wrote:
> I will certainly remove CONFIG_CPU_HAS_LLSC, thank you. I attempted to
> enable 'cpu_has_clo_clz' for SEAD-3, but it breaks my microMIPS-only
> kernel builds. Specifically, since microMIPS LL/SC instructions do
> not have 16-bit address offsets, in the '__cmpxchg_asm' macro function
> I get constraint errors because then the assembler has to use the %LO
> register in order to calculate the offset address. I am going to hold
> off on enabling the option until after the 3.5 release and then
> revisit for a solution. Thank you.
Got it, find no problems with your plan. It seems there must be other
issues with optimization on microMIPS-only kernels :-)
--
Shinya Kuribayashi
Renesas Electronics
^ permalink raw reply [flat|nested] 23+ messages in thread
* RE: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
2012-05-07 20:16 ` Hill, Steven
2012-05-08 4:01 ` Shinya Kuribayashi
@ 2012-05-08 11:16 ` Maciej W. Rozycki
2012-05-08 20:38 ` Hill, Steven
1 sibling, 1 reply; 23+ messages in thread
From: Maciej W. Rozycki @ 2012-05-08 11:16 UTC (permalink / raw)
To: Hill, Steven
Cc: Shinya Kuribayashi, linux-mips, ralf, Leung, Douglas, Dearman, Chris
On Mon, 7 May 2012, Hill, Steven wrote:
> I will certainly remove CONFIG_CPU_HAS_LLSC, thank you. I attempted to
> enable 'cpu_has_clo_clz' for SEAD-3, but it breaks my microMIPS-only
> kernel builds. Specifically, since microMIPS LL/SC instructions do not
> have 16-bit address offsets, in the '__cmpxchg_asm' macro function I get
> constraint errors because then the assembler has to use the %LO register
> in order to calculate the offset address. I am going to hold off on
> enabling the option until after the 3.5 release and then revisit for a
> solution. Thank you.
It's OK to ask. :) Try using the "YC" constraint, this piece:
int test(void *p)
{
int i;
__asm__ __volatile__("ll\t%0,%1" : "=r" (i) : "YC" (*p));
return i;
}
assembles to:
ll $2,0($4)
jrc $31
for me (with "-O2 -mmicromips").
You may have to factor in backwards compatibility -- while "YC" is
supported both in the microMIPS and the standard MIPS mode, switching the
width of the immediate offset between 12 and 16 bits as appropriate, it's
certainly a new constraint older compilers did not support. I suggest
using a macro, as usually, you can use some existing examples as a
reference, e.g. <asm/compiler.h> (you know where to place this stuff now
too :) ).
Maciej
^ permalink raw reply [flat|nested] 23+ messages in thread* RE: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
2012-05-08 11:16 ` Maciej W. Rozycki
@ 2012-05-08 20:38 ` Hill, Steven
2012-05-11 7:37 ` Maciej W. Rozycki
0 siblings, 1 reply; 23+ messages in thread
From: Hill, Steven @ 2012-05-08 20:38 UTC (permalink / raw)
To: Maciej W. Rozycki; +Cc: Shinya Kuribayashi, linux-mips, ralf
I thought the "YC" constraint was only present in CodeSourcery toolchains, correct? If so, then that levies the requirement for a vendor-specific toolchain to build a microMIPS kernel. I do not consider that palpable. If it is not CodeSourcery-specific, then I will certainly try it out.
^ permalink raw reply [flat|nested] 23+ messages in thread
* RE: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
2012-05-08 20:38 ` Hill, Steven
@ 2012-05-11 7:37 ` Maciej W. Rozycki
0 siblings, 0 replies; 23+ messages in thread
From: Maciej W. Rozycki @ 2012-05-11 7:37 UTC (permalink / raw)
To: Hill, Steven; +Cc: Shinya Kuribayashi, linux-mips, ralf
On Tue, 8 May 2012, Hill, Steven wrote:
> I thought the "YC" constraint was only present in CodeSourcery
> toolchains, correct? If so, then that levies the requirement for a
> vendor-specific toolchain to build a microMIPS kernel. I do not consider
> that palpable. If it is not CodeSourcery-specific, then I will certainly
> try it out.
The GNU GPL applies, these sources are publicly available, so it's not
like anyone can't use them, integrate into their compiler, etc. Binutils
microMIPS support has already been integrated upstream.
Also is there any other compiler that makes microMIPS code? If so, then
I suggest that you convince its maintainers to make a compatible
constraint available. We'll need it sooner or later (you can force the
address into a register of course -- it was already considered a few years
ago before "R" was fixed in GCC to work reliably -- but I don't expect you
want such a pessimisation) and anyone implementing microMIPS support in
their compiler and willing to support building Linux will have to provide
the necessary constraint just as everyone already has to provide the "R"
constraint for standard MIPS code.
Note that as it is, you need to do something about all the code that uses
"R" with microMIPS instructions that have their immediate offset limited
to 12 bits anyway -- apart from <asm/cmpxchg.h> considered here this
includes stuff in <asm/futex.h> and <asm/r4kcache.h>. I maintain that
"YC" is your best bet especially given the little effort required to
handle it, and should any other compiler choose to use a different
constraint for this purpose, then it can be conditionalised on that
compiler's ID.
If you're concerned that "YC" can be used for something else in upstream
GCC, then we can coordinate this with GCC maintainers -- it's not like
we're running of of letters here.
Maciej
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 02/10] MIPS: Changes to configuration files for SEAD-3 platform.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
2012-04-07 16:48 ` [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-04-10 1:19 ` Shinya Kuribayashi
2012-04-07 16:48 ` [PATCH 03/10] MIPS: Add support for the M14K core Steven J. Hill
` (7 subsequent siblings)
9 siblings, 1 reply; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill
From: "Steven J. Hill" <sjhill@mips.com>
Change MIPS configuration files to add the SEAD-3. Also add
new default configuration file for a SEAD-3 kernel.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 33 +-
arch/mips/configs/sead3_defconfig | 1757 +++++++++++++++++++++++++++++++++++++
3 files changed, 1788 insertions(+), 3 deletions(-)
create mode 100644 arch/mips/configs/sead3_defconfig
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 5ce8029..84a3a81 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -16,6 +16,7 @@ platforms += lasat
platforms += loongson
platforms += mipssim
platforms += mti-malta
+platforms += mti-sead3
platforms += netlogic
platforms += pmc-sierra
platforms += pnx833x
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0c7fb5d..4eae8f4 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -297,6 +297,35 @@ config MIPS_MALTA
This enables support for the MIPS Technologies Malta evaluation
board.
+config MIPS_SEAD3
+ bool "MIPS SEAD3 board"
+ select BOOT_ELF32
+ select BOOT_RAW
+ select CEVT_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select IRQ_GIC
+ select MIPS_BOARDS_GEN
+ select MIPS_CPU_SCACHE
+ select MIPS_MSC
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_SMARTMIPS
+ select SYS_SUPPORTS_MICROMIPS
+ select USB_ARCH_HAS_EHCI
+ select USB_EHCI_BIG_ENDIAN_DESC
+ select USB_EHCI_BIG_ENDIAN_MMIO
+ help
+ This enables support for the MIPS Technologies SEAD3 evaluation
+ board.
+
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select CEVT_R4K
@@ -1710,7 +1739,6 @@ config HARDWARE_WATCHPOINTS
menu "Kernel type"
choice
-
prompt "Kernel code model"
help
You should only select this option if you have a workload that
@@ -1852,7 +1880,7 @@ config MIPS_MT_DISABLED
config MIPS_MT_SMP
bool "Use 1 TC on each available VPE for SMP"
- depends on SYS_SUPPORTS_MULTITHREADING
+ depends on SYS_SUPPORTS_MULTITHREADING && !MIPS_SEAD3
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select MIPS_MT
@@ -1916,7 +1944,6 @@ config SCHED_SMT
config SYS_SUPPORTS_SCHED_SMT
bool
-
config SYS_SUPPORTS_MULTITHREADING
bool
diff --git a/arch/mips/configs/sead3_defconfig b/arch/mips/configs/sead3_defconfig
new file mode 100644
index 0000000..0482328
--- /dev/null
+++ b/arch/mips/configs/sead3_defconfig
@@ -0,0 +1,1757 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/mips 3.3.0 Kernel Configuration
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_ATH79 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_JZ4740 is not set
+# CONFIG_LANTIQ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_SEAD3=y
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_NLM_XLR_BOARD is not set
+# CONFIG_NLM_XLP_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+
+#
+# Clock source
+#
+
+#
+# Select one or more precise CPU clock source kernel modules below:
+#
+CONFIG_CSRC_R4K=y
+# CONFIG_CSRC_GIC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_MIPS_MSC=y
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_GIC=y
+CONFIG_MIPS_BOARDS_GEN=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=6
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_CPU_SCACHE=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+# CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_CPU_HAS_SMARTMIPS is not set
+# CONFIG_CPU_MICROMIPS is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_SMARTMIPS=y
+CONFIG_SYS_SUPPORTS_MICROMIPS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
+# CONFIG_USE_OF is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_IRQ_FORCED_THREADING=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_CGROUPS is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_BSGLIB is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_UNIX_DIAG is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+CONFIG_BQL=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+# CONFIG_DMA_SHARED_BUFFER is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_RBD is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_MII=y
+# CONFIG_NET_TEAM is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+# CONFIG_NET_CALXEDA_XGMAC is not set
+CONFIG_NET_VENDOR_CHELSIO=y
+# CONFIG_DM9000 is not set
+# CONFIG_DNET is not set
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_8390=y
+# CONFIG_AX88796 is not set
+# CONFIG_ETHOC is not set
+CONFIG_NET_VENDOR_SEEQ=y
+# CONFIG_SEEQ8005 is not set
+CONFIG_NET_VENDOR_SMSC=y
+# CONFIG_SMC91X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+CONFIG_NET_VENDOR_STMICRO=y
+# CONFIG_STMMAC_ETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AMD_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_SMBUS is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+CONFIG_SENSORS_ADT7475=y
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_S5M_CORE is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_EXYNOS_VIDEO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_LP855X is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA9633 is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_OT200 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# Virtio drivers
+#
+# CONFIG_VIRTIO_BALLOON is not set
+# CONFIG_VIRTIO_MMIO is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+# CONFIG_STAGING is not set
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_VIRT_DRIVERS is not set
+# CONFIG_PM_DEVFREQ is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+# CONFIG_CRC8 is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
+# CONFIG_CORDIC is not set
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH 02/10] MIPS: Changes to configuration files for SEAD-3 platform.
2012-04-07 16:48 ` [PATCH 02/10] MIPS: Changes to configuration files for SEAD-3 platform Steven J. Hill
@ 2012-04-10 1:19 ` Shinya Kuribayashi
0 siblings, 0 replies; 23+ messages in thread
From: Shinya Kuribayashi @ 2012-04-10 1:19 UTC (permalink / raw)
To: sjhill; +Cc: linux-mips, ralf
On 4/8/2012 1:48 AM, Steven J. Hill wrote:
> From: "Steven J. Hill" <sjhill@mips.com>
>
> Change MIPS configuration files to add the SEAD-3. Also add
> new default configuration file for a SEAD-3 kernel.
>
> Signed-off-by: Steven J. Hill <sjhill@mips.com>
> ---
> arch/mips/Kbuild.platforms | 1 +
> arch/mips/Kconfig | 33 +-
> arch/mips/configs/sead3_defconfig | 1757 +++++++++++++++++++++++++++++++++++++
Why not using 'make savedefconfig'?
> 3 files changed, 1788 insertions(+), 3 deletions(-)
> create mode 100644 arch/mips/configs/sead3_defconfig
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 03/10] MIPS: Add support for the M14K core.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
2012-04-07 16:48 ` [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform Steven J. Hill
2012-04-07 16:48 ` [PATCH 02/10] MIPS: Changes to configuration files for SEAD-3 platform Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-04-07 16:48 ` [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions Steven J. Hill
` (6 subsequent siblings)
9 siblings, 0 replies; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill
From: "Steven J. Hill" <sjhill@mips.com>
This patch depends on the 1074K core support patch being
applied first.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
arch/mips/include/asm/cpu.h | 5 +++--
arch/mips/kernel/cpu-probe.c | 10 +++++++++-
arch/mips/mm/c-r4k.c | 1 +
arch/mips/mm/tlbex.c | 4 +++-
arch/mips/oprofile/common.c | 1 +
arch/mips/oprofile/op_model_mipsxx.c | 4 ++++
6 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index ddd8b4a..00e5adf 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -95,6 +95,7 @@
#define PRID_IMP_74K 0x9700
#define PRID_IMP_1004K 0x9900
#define PRID_IMP_1074K 0x9a00
+#define PRID_IMP_14K 0x9c00
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -261,7 +262,7 @@ enum cpu_type_enum {
*/
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
- CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_1074K,
+ CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_1074K, CPU_14K,
/*
* MIPS64 class processors
@@ -289,7 +290,7 @@ enum cpu_type_enum {
#define MIPS_CPU_ISA_M64R2 0x00000100
#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
- MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+ MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2)
#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index cb1e2e9..0fccb8c 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -4,7 +4,7 @@
* Copyright (C) xxxx the Anonymous
* Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
- * Copyright (C) 2001, 2004 MIPS Inc.
+ * Copyright (C) 2001, 2004, 2011 MIPS Technologies, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -22,6 +22,7 @@
#include <asm/cpu.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
+#include <asm/system.h>
#include <asm/watch.h>
#include <asm/elf.h>
#include <asm/spram.h>
@@ -199,6 +200,7 @@ void __init check_wait(void)
cpu_wait = rm7k_wait_irqoff;
break;
+ case CPU_14K:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
@@ -743,6 +745,8 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
c->ases |= MIPS_ASE_MIPSMT;
if (config3 & MIPS_CONF3_ULRI)
c->options |= MIPS_CPU_ULRI;
+ if (config3 & MIPS_CONF3_CTXTC)
+ c->options |= MIPS_CPU_CTXTC;
return config3 & MIPS_CONF_M;
}
@@ -832,6 +836,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
c->cputype = CPU_74K;
__cpu_name[cpu] = "MIPS 74Kc";
break;
+ case PRID_IMP_14K:
+ c->cputype = CPU_14K;
+ __cpu_name[cpu] = "MIPS 14Kc";
+ break;
case PRID_IMP_1004K:
c->cputype = CPU_1004K;
__cpu_name[cpu] = "MIPS 1004Kc";
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index efcf385..9cd86fa 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1073,6 +1073,7 @@ static void __cpuinit probe_pcache(void)
/* fall through */
bypass1074:
;
+ case CPU_14K:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 0bc485b..a034229b 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -8,7 +8,8 @@
* Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer
* Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki
* Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2008, 2009 Cavium Networks, Inc.
+ * Copyright (C) 2008, 2009 Cavium Networks, Inc.
+ * Copyright (C) 2011 MIPS Technologies, Inc.
*
* ... and the days got worse and worse and now you see
* I've gone completly out of my mind.
@@ -494,6 +495,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
case CPU_R14000:
case CPU_4KC:
case CPU_4KEC:
+ case CPU_14K:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 846faf7..b2e850e 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -78,6 +78,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
switch (current_cpu_type()) {
case CPU_5KC:
+ case CPU_14K:
case CPU_20KC:
case CPU_24K:
case CPU_25KF:
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 13487a9..fdf3ce5 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -317,6 +317,10 @@ static int __init mipsxx_init(void)
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
+ case CPU_14K:
+ op_model_mipsxx_ops.cpu_type = "mips/14K";
+ break;
+
case CPU_20KC:
op_model_mipsxx_ops.cpu_type = "mips/20K";
break;
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
` (2 preceding siblings ...)
2012-04-07 16:48 ` [PATCH 03/10] MIPS: Add support for the M14K core Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-05-01 0:26 ` Maciej W. Rozycki
2012-05-01 0:49 ` David Daney
2012-04-07 16:48 ` [PATCH 05/10] MIPS: GIC interrupt changes for M14K and SEAD-3 support Steven J. Hill
` (5 subsequent siblings)
9 siblings, 2 replies; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill
From: "Steven J. Hill" <sjhill@mips.com>
Add the MIPS32R2 'ins' and 'ext' instructions for use by the
kernel's micro-assembler.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
arch/mips/include/asm/uasm.h | 15 +++++++++++++++
arch/mips/mm/tlbex.c | 17 +++++++++++++++++
arch/mips/mm/uasm.c | 15 +++++++++++++++
3 files changed, 47 insertions(+)
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 504d40a..f400629 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -60,6 +60,16 @@ void __uasminit uasm_i##op(u32 **buf, unsigned int a, signed int b)
#define Ip_0(op) void __uasminit uasm_i##op(u32 **buf)
+#define Ip_bit_extract(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, \
+ unsigned int c, unsigned int d)
+
+#define Ip_bit_insert(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, \
+ unsigned int c, unsigned int d)
+
Ip_u2u1s3(_addiu);
Ip_u3u1u2(_addu);
Ip_u2u1u3(_andi);
@@ -114,6 +124,8 @@ Ip_0(_tlbwi);
Ip_0(_tlbwr);
Ip_u3u1u2(_xor);
Ip_u2u1u3(_xori);
+Ip_bit_extract(_ext);
+Ip_bit_insert(_ins);
Ip_u2u1msbu3(_dins);
Ip_u2u1msbu3(_dinsm);
Ip_u1(_syscall);
@@ -161,6 +173,9 @@ static inline void __uasminit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
# define UASM_i_SC(buf, rs, rt, off) uasm_i_scd(buf, rs, rt, off)
# define UASM_i_LWX(buf, rs, rt, rd) uasm_i_ldx(buf, rs, rt, rd)
#else
+/* actually, the argument sequence is: rt, rs, pos, size. -- LY22 */
+# define UASM_i_EXT(buf, rs, rt, size, pos) uasm_i_ext(buf, rs, rt, size, pos)
+# define UASM_i_INS(buf, rs, rt, size, pos) uasm_i_ins(buf, rs, rt, size, pos)
# define UASM_i_LW(buf, rs, rt, off) uasm_i_lw(buf, rs, rt, off)
# define UASM_i_SW(buf, rs, rt, off) uasm_i_sw(buf, rs, rt, off)
# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_sll(buf, rs, rt, sh)
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index a034229b..4db0d19 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -921,6 +921,13 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr);
+#ifdef CONFIG_32BIT
+ if (cpu_has_mips32r2) {
+ uasm_i_ext(p, tmp, tmp, PGDIR_SHIFT, (32 - PGDIR_SHIFT));
+ uasm_i_ins(p, ptr, tmp, PGD_T_LOG2, (32 - PGDIR_SHIFT));
+ return;
+ }
+#endif
uasm_i_srl(p, tmp, tmp, PGDIR_SHIFT); /* get pgd only bits */
uasm_i_sll(p, tmp, tmp, PGD_T_LOG2);
uasm_i_addu(p, ptr, ptr, tmp); /* add in pgd offset */
@@ -956,6 +963,16 @@ static void __cpuinit build_adjust_context(u32 **p, unsigned int ctx)
static void __cpuinit build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
{
+#ifdef CONFIG_32BIT
+ if (cpu_has_mips32r2) {
+ /* For MIPS32R2, PTE ptr offset is obtained from BadVAddr */
+ UASM_i_MFC0(p, tmp, C0_BADVADDR);
+ UASM_i_LW(p, ptr, 0, ptr);
+ UASM_i_EXT(p, tmp, tmp, PAGE_SHIFT+1, PGDIR_SHIFT-PAGE_SHIFT-1);
+ UASM_i_INS(p, ptr, tmp, PTE_T_LOG2+1, PGDIR_SHIFT-PAGE_SHIFT-1);
+ return;
+ }
+#endif
/*
* Bug workaround for the Nevada. It seems as if under certain
* circumstances the move from cp0_context might produce a
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 5fa1851..fb6d8e27 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -63,6 +63,7 @@ enum opcode {
insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0,
insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
insn_dsrl32, insn_drotr, insn_drotr32, insn_dsubu, insn_eret,
+ insn_ins, insn_ext,
insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld,
insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_or, insn_ori,
insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
@@ -113,6 +114,8 @@ static struct insn insn_table[] __uasminitdata = {
{ insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
{ insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
{ insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 },
+ { insn_ins, M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE },
+ { insn_ext, M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE },
{ insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
{ insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
{ insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
@@ -287,6 +290,16 @@ static void __uasminit build_insn(u32 **buf, enum opcode opc, ...)
(*buf)++;
}
+#define I_bit_extract(op) \
+Ip_bit_extract(op) \
+{ \
+ build_insn(buf, insn##op, b, a, d-1, c); \
+}
+#define I_bit_insert(op) \
+Ip_bit_insert(op) \
+{ \
+ build_insn(buf, insn##op, b, a, c+d-1, c); \
+}
#define I_u1u2u3(op) \
Ip_u1u2u3(op) \
{ \
@@ -396,6 +409,8 @@ I_u2u1u3(_drotr)
I_u2u1u3(_drotr32)
I_u3u1u2(_dsubu)
I_0(_eret)
+I_bit_insert(_ins)
+I_bit_extract(_ext)
I_u1(_j)
I_u1(_jal)
I_u1(_jr)
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
2012-04-07 16:48 ` [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions Steven J. Hill
@ 2012-05-01 0:26 ` Maciej W. Rozycki
2012-05-01 0:51 ` David Daney
2012-05-01 0:49 ` David Daney
1 sibling, 1 reply; 23+ messages in thread
From: Maciej W. Rozycki @ 2012-05-01 0:26 UTC (permalink / raw)
To: Steven J. Hill; +Cc: linux-mips, ralf
On Sat, 7 Apr 2012, Steven J. Hill wrote:
> diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
> index 5fa1851..fb6d8e27 100644
> --- a/arch/mips/mm/uasm.c
> +++ b/arch/mips/mm/uasm.c
> @@ -63,6 +63,7 @@ enum opcode {
> insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0,
> insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
> insn_dsrl32, insn_drotr, insn_drotr32, insn_dsubu, insn_eret,
> + insn_ins, insn_ext,
> insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld,
> insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_or, insn_ori,
> insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
> @@ -113,6 +114,8 @@ static struct insn insn_table[] __uasminitdata = {
> { insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
> { insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
> { insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 },
> + { insn_ins, M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE },
> + { insn_ext, M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE },
> { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
> { insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
> { insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
Not an extensive review -- just noticed this issue while browsing...
These two data definitions are clearly alphabetically ordered, so please
keep them as such. It seems rather a trivial update in this case -- just
swap the new entries. Thanks.
Maciej
^ permalink raw reply [flat|nested] 23+ messages in thread* Re: [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
2012-05-01 0:26 ` Maciej W. Rozycki
@ 2012-05-01 0:51 ` David Daney
2012-05-07 5:18 ` Maciej W. Rozycki
0 siblings, 1 reply; 23+ messages in thread
From: David Daney @ 2012-05-01 0:51 UTC (permalink / raw)
To: Maciej W. Rozycki; +Cc: Steven J. Hill, linux-mips, ralf
On 04/30/2012 05:26 PM, Maciej W. Rozycki wrote:
> On Sat, 7 Apr 2012, Steven J. Hill wrote:
>
>> diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
>> index 5fa1851..fb6d8e27 100644
>> --- a/arch/mips/mm/uasm.c
>> +++ b/arch/mips/mm/uasm.c
>> @@ -63,6 +63,7 @@ enum opcode {
>> insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0,
>> insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
>> insn_dsrl32, insn_drotr, insn_drotr32, insn_dsubu, insn_eret,
>> + insn_ins, insn_ext,
>> insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld,
>> insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_or, insn_ori,
>> insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
>> @@ -113,6 +114,8 @@ static struct insn insn_table[] __uasminitdata = {
>> { insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
>> { insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
>> { insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 },
>> + { insn_ins, M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE },
>> + { insn_ext, M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE },
>> { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
>> { insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
>> { insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
>
> Not an extensive review -- just noticed this issue while browsing...
>
> These two data definitions are clearly alphabetically ordered, so please
> keep them as such. It seems rather a trivial update in this case -- just
> swap the new entries. Thanks.
Well I broke the ordering with a bunch of my patches lower down.
Perhaps we should fix it so it goes back to being ordered.
David Daney
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
2012-04-07 16:48 ` [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions Steven J. Hill
2012-05-01 0:26 ` Maciej W. Rozycki
@ 2012-05-01 0:49 ` David Daney
1 sibling, 0 replies; 23+ messages in thread
From: David Daney @ 2012-05-01 0:49 UTC (permalink / raw)
To: Steven J. Hill; +Cc: linux-mips, ralf
On 04/07/2012 09:48 AM, Steven J. Hill wrote:
> From: "Steven J. Hill"<sjhill@mips.com>
>
> Add the MIPS32R2 'ins' and 'ext' instructions for use by the
> kernel's micro-assembler.
>
> Signed-off-by: Steven J. Hill<sjhill@mips.com>
> ---
> arch/mips/include/asm/uasm.h | 15 +++++++++++++++
> arch/mips/mm/tlbex.c | 17 +++++++++++++++++
I would split the tlbex.c changes into a separate patch. The changelog
doesn't even mention the changes you are making to this file.
> arch/mips/mm/uasm.c | 15 +++++++++++++++
> 3 files changed, 47 insertions(+)
>
[...]
> --- a/arch/mips/mm/tlbex.c
> +++ b/arch/mips/mm/tlbex.c
> @@ -921,6 +921,13 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
> #endif
> uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
> uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr);
> +#ifdef CONFIG_32BIT
> + if (cpu_has_mips32r2) {
> + uasm_i_ext(p, tmp, tmp, PGDIR_SHIFT, (32 - PGDIR_SHIFT));
> + uasm_i_ins(p, ptr, tmp, PGD_T_LOG2, (32 - PGDIR_SHIFT));
> + return;
> + }
> +#endif
Can we somehow get rid of the #ifdef? You are already doing
if(condition) around the same code.
> uasm_i_srl(p, tmp, tmp, PGDIR_SHIFT); /* get pgd only bits */
> uasm_i_sll(p, tmp, tmp, PGD_T_LOG2);
> uasm_i_addu(p, ptr, ptr, tmp); /* add in pgd offset */
> @@ -956,6 +963,16 @@ static void __cpuinit build_adjust_context(u32 **p, unsigned int ctx)
>
> static void __cpuinit build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
> {
> +#ifdef CONFIG_32BIT
> + if (cpu_has_mips32r2) {
> + /* For MIPS32R2, PTE ptr offset is obtained from BadVAddr */
> + UASM_i_MFC0(p, tmp, C0_BADVADDR);
> + UASM_i_LW(p, ptr, 0, ptr);
> + UASM_i_EXT(p, tmp, tmp, PAGE_SHIFT+1, PGDIR_SHIFT-PAGE_SHIFT-1);
> + UASM_i_INS(p, ptr, tmp, PTE_T_LOG2+1, PGDIR_SHIFT-PAGE_SHIFT-1);
> + return;
> + }
> +#endif
Same here.
> /*
> * Bug workaround for the Nevada. It seems as if under certain
> * circumstances the move from cp0_context might produce a
> diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
> index 5fa1851..fb6d8e27 100644
> --- a/arch/mips/mm/uasm.c
> +++ b/arch/mips/mm/uasm.c
> @@ -63,6 +63,7 @@ enum opcode {
> insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0,
> insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
> insn_dsrl32, insn_drotr, insn_drotr32, insn_dsubu, insn_eret,
> + insn_ins, insn_ext,
> insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld,
> insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_or, insn_ori,
> insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
> @@ -113,6 +114,8 @@ static struct insn insn_table[] __uasminitdata = {
> { insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
> { insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
> { insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 },
> + { insn_ins, M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE },
> + { insn_ext, M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE },
> { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
> { insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
> { insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
> @@ -287,6 +290,16 @@ static void __uasminit build_insn(u32 **buf, enum opcode opc, ...)
> (*buf)++;
> }
>
> +#define I_bit_extract(op) \
> +Ip_bit_extract(op) \
The names don't match the pattern, look at the dins for example.
> +{ \
> + build_insn(buf, insn##op, b, a, d-1, c); \
> +}
> +#define I_bit_insert(op) \
> +Ip_bit_insert(op) \
> +{ \
> + build_insn(buf, insn##op, b, a, c+d-1, c); \
> +}
> #define I_u1u2u3(op) \
> Ip_u1u2u3(op) \
> { \
> @@ -396,6 +409,8 @@ I_u2u1u3(_drotr)
> I_u2u1u3(_drotr32)
> I_u3u1u2(_dsubu)
> I_0(_eret)
> +I_bit_insert(_ins)
> +I_bit_extract(_ext)
> I_u1(_j)
> I_u1(_jal)
> I_u1(_jr)
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 05/10] MIPS: GIC interrupt changes for M14K and SEAD-3 support.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
` (3 preceding siblings ...)
2012-04-07 16:48 ` [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-04-07 16:48 ` [PATCH 06/10] MIPS: Code formatting fixes Steven J. Hill
` (4 subsequent siblings)
9 siblings, 0 replies; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill, Douglas Leung, Chris Dearman
From: "Steven J. Hill" <sjhill@mips.com>
These changes are to support the different GIC implementation that
is used with M14K cores. It also supports the new SEAD-3 platform
interrupt sources.
Signed-off-by: Douglas Leung <douglas@mips.com>
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
arch/mips/include/asm/cpu-features.h | 4 +-
arch/mips/kernel/cevt-r4k.c | 5 +
arch/mips/kernel/irq-gic.c | 168 ++++++++++++++++++++++++++++++++--
3 files changed, 169 insertions(+), 8 deletions(-)
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index ca400f7..556afa2 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -222,13 +222,13 @@
# endif
#endif
-#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+#if (defined(CONFIG_MIPS_SEAD3) || defined(CONFIG_CPU_MIPSR2_IRQ_VI)) && !defined(cpu_has_vint)
# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT)
#elif !defined(cpu_has_vint)
# define cpu_has_vint 0
#endif
-#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+#if (defined(CONFIG_MIPS_SEAD3) || defined(CONFIG_CPU_MIPSR2_IRQ_EI)) && !defined(cpu_has_veic)
# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC)
#elif !defined(cpu_has_veic)
# define cpu_has_veic 0
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 51095dd9..17a59a5 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -15,6 +15,7 @@
#include <asm/smtc_ipi.h>
#include <asm/time.h>
#include <asm/cevt-r4k.h>
+#include <asm/gic.h>
/*
* The SMTC Kernel for the 34K, 1004K, et. al. replaces several
@@ -98,6 +99,10 @@ void mips_event_handler(struct clock_event_device *dev)
*/
static int c0_compare_int_pending(void)
{
+#ifdef CONFIG_MIPS_SEAD3
+ if (cpu_has_veic)
+ return gic_get_timer_pending();
+#endif
return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
}
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 0c527f6..275b163 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -8,19 +8,93 @@
#include <asm/io.h>
#include <asm/gic.h>
#include <asm/gcmpregs.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_MIPS_SEAD3
+#include <asm/mips-boards/sead3int.h>
+#else
+#include <asm/mips-boards/maltaint.h>
+#endif
+
+#include <asm/traps.h>
#include <linux/hardirq.h>
#include <asm-generic/bitops/find.h>
-
static unsigned long _gic_base;
static unsigned int _irqbase;
static unsigned int gic_irq_flags[GIC_NUM_INTRS];
#define GIC_IRQ_FLAG_EDGE 0x0001
+/* The index into this array is the vector # of the interrupt. */
+static struct gic_shared_intr_map gic_shared_intr_map[GIC_NUM_INTRS];
+
struct gic_pcpu_mask pcpu_masks[NR_CPUS];
static struct gic_pending_regs pending_regs[NR_CPUS];
static struct gic_intrmask_regs intrmask_regs[NR_CPUS];
+unsigned int gic_get_timer_pending(void)
+{
+ unsigned int vpe_pending;
+
+ GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), 0);
+ GICREAD(GIC_REG(VPE_OTHER, GIC_VPE_PEND), vpe_pending);
+ return vpe_pending & GIC_VPE_PEND_TIMER_MSK;
+}
+
+/* Helper function to enable the interrupt */
+/* NOTE: the _irqbase have already been removed. */
+void gic_enable_interrupt(int irq_vec)
+{
+#ifdef CONFIG_MIPS_SEAD3
+ unsigned int i;
+ unsigned int irq_source;
+
+ /* enable all the interrupts associated with this vector */
+ for (i = 0; i < gic_shared_intr_map[irq_vec].num_shared_intr; i++) {
+ irq_source = gic_shared_intr_map[irq_vec].intr_list[i];
+ GIC_SET_INTR_MASK(irq_source);
+ }
+ /* enable all local interrupts associated with this vector */
+ if (gic_shared_intr_map[irq_vec].local_intr_mask) {
+ GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), 0);
+ GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_SMASK), gic_shared_intr_map[irq_vec].local_intr_mask);
+ }
+#else
+ GIC_SET_INTR_MASK(irq_vec);
+#endif
+}
+
+/* Helper function to disable the interrupt */
+/* NOTE: the _irqbase have already been removed. */
+void gic_disable_interrupt(int irq_vec)
+{
+#ifdef CONFIG_MIPS_SEAD3
+ unsigned int i;
+ unsigned int irq_source;
+
+ /* disable all the interrupts associated with this vector */
+ for (i = 0; i < gic_shared_intr_map[irq_vec].num_shared_intr; i++) {
+ irq_source = gic_shared_intr_map[irq_vec].intr_list[i];
+ GIC_CLR_INTR_MASK(irq_source);
+ }
+ /* disable all local interrupts associated with this vector */
+ if (gic_shared_intr_map[irq_vec].local_intr_mask) {
+ GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), 0);
+ GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_RMASK), gic_shared_intr_map[irq_vec].local_intr_mask);
+ }
+#else
+ GIC_CLR_INTR_MASK(irq_vec);
+#endif
+}
+
+void gic_bind_eic_interrupt(int irq, int set)
+{
+ irq = irq - GIC_PIN_TO_VEC_OFFSET; /* convert irq vector # to hw int # */
+
+ /* set irq to use shadow set */
+ GICWRITE(GIC_REG_ADDR(VPE_LOCAL, GIC_VPE_EIC_SS(irq)), set);
+}
+
void gic_send_ipi(unsigned int intr)
{
pr_debug("CPU%d: %s status %08x\n", smp_processor_id(), __func__,
@@ -28,13 +102,35 @@ void gic_send_ipi(unsigned int intr)
GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr);
}
+static void gic_eic_irq_dispatch(void)
+{
+ unsigned int cause = read_c0_cause();
+ int irq;
+
+ irq = (cause & ST0_IM) >> STATUSB_IP2;
+ if (irq == 0)
+ irq = -1;
+
+ if (irq >= 0)
+ do_IRQ(_irqbase + irq);
+ else
+ spurious_interrupt();
+}
+
/* This is Malta specific and needs to be exported */
static void __init vpe_local_setup(unsigned int numvpes)
{
int i;
- unsigned long timer_interrupt = 5, perf_interrupt = 5;
+ unsigned long timer_interrupt = GIC_INT_TMR, perf_interrupt = GIC_INT_PERFCTR;
unsigned int vpe_ctl;
+ if (cpu_has_veic) {
+ /* GIC timer interrupt -> CPU HW Int X (vector X+2) -> map to pin X+2-1 (since GIC adds 1) */
+ timer_interrupt += (GIC_CPU_TO_VEC_OFFSET - GIC_PIN_TO_VEC_OFFSET);
+ /* GIC perfcnt interrupt -> CPU HW Int X (vector X+2) -> map to pin X+2-1 (since GIC adds 1) */
+ perf_interrupt += (GIC_CPU_TO_VEC_OFFSET - GIC_PIN_TO_VEC_OFFSET);
+ }
+
/*
* Setup the default performance counter timer interrupts
* for all VPEs
@@ -47,10 +143,18 @@ static void __init vpe_local_setup(unsigned int numvpes)
if (vpe_ctl & GIC_VPE_CTL_TIMER_RTBL_MSK)
GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_TIMER_MAP),
GIC_MAP_TO_PIN_MSK | timer_interrupt);
+ if (cpu_has_veic) {
+ set_vi_handler(timer_interrupt+GIC_PIN_TO_VEC_OFFSET, gic_eic_irq_dispatch);
+ gic_shared_intr_map[timer_interrupt+GIC_PIN_TO_VEC_OFFSET].local_intr_mask |= GIC_VPE_RMASK_TIMER_MSK;
+ }
if (vpe_ctl & GIC_VPE_CTL_PERFCNT_RTBL_MSK)
GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_PERFCTR_MAP),
GIC_MAP_TO_PIN_MSK | perf_interrupt);
+ if (cpu_has_veic) {
+ set_vi_handler(perf_interrupt+GIC_PIN_TO_VEC_OFFSET, gic_eic_irq_dispatch);
+ gic_shared_intr_map[perf_interrupt+GIC_PIN_TO_VEC_OFFSET].local_intr_mask |= GIC_VPE_RMASK_PERFCNT_MSK;
+ }
}
}
@@ -94,8 +198,10 @@ static void gic_irq_ack(struct irq_data *d)
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
GIC_CLR_INTR_MASK(irq);
+#ifndef CONFIG_MIPS_SEAD3
if (gic_irq_flags[irq] & GIC_IRQ_FLAG_EDGE)
GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
+#endif
}
static void gic_mask_irq(struct irq_data *d)
@@ -112,6 +218,26 @@ static void gic_unmask_irq(struct irq_data *d)
GIC_SET_INTR_MASK(irq);
}
+static void gic_finish_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq - _irqbase;
+#ifdef CONFIG_MIPS_SEAD3
+ unsigned int i;
+ unsigned int irq_source;
+
+ /* clear edge detectors */
+ for (i = 0; i < gic_shared_intr_map[irq].num_shared_intr; i++) {
+ irq_source = gic_shared_intr_map[irq].intr_list[i];
+ if (gic_irq_flags[irq_source] & GIC_IRQ_FLAG_EDGE)
+ GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq_source);
+ }
+#endif
+
+ pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+ /* enable interrupts */
+ GIC_SET_INTR_MASK(irq);
+}
+
#ifdef CONFIG_SMP
static DEFINE_SPINLOCK(gic_lock);
@@ -154,7 +280,7 @@ static struct irq_chip gic_irq_controller = {
.irq_mask = gic_mask_irq,
.irq_mask_ack = gic_mask_irq,
.irq_unmask = gic_unmask_irq,
- .irq_eoi = gic_unmask_irq,
+ .irq_eoi = gic_finish_irq,
#ifdef CONFIG_SMP
.irq_set_affinity = gic_set_affinity,
#endif
@@ -164,6 +290,8 @@ static void __init gic_setup_intr(unsigned int intr, unsigned int cpu,
unsigned int pin, unsigned int polarity, unsigned int trigtype,
unsigned int flags)
{
+ struct gic_shared_intr_map *map_ptr;
+
/* Setup Intr to Pin mapping */
if (pin & GIC_MAP_TO_NMI_MSK) {
GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), pin);
@@ -178,6 +306,13 @@ static void __init gic_setup_intr(unsigned int intr, unsigned int cpu,
GIC_MAP_TO_PIN_MSK | pin);
/* Setup Intr to CPU mapping */
GIC_SH_MAP_TO_VPE_SMASK(intr, cpu);
+ if (cpu_has_veic) {
+ set_vi_handler(pin+GIC_PIN_TO_VEC_OFFSET, gic_eic_irq_dispatch);
+ map_ptr = &gic_shared_intr_map[pin+GIC_PIN_TO_VEC_OFFSET];
+ if (map_ptr->num_shared_intr >= GIC_MAX_SHARED_INTR)
+ BUG();
+ map_ptr->intr_list[map_ptr->num_shared_intr++] = intr;
+ }
}
/* Setup Intr Polarity */
@@ -191,7 +326,7 @@ static void __init gic_setup_intr(unsigned int intr, unsigned int cpu,
/* Initialise per-cpu Interrupt software masks */
if (flags & GIC_FLAG_IPI)
set_bit(intr, pcpu_masks[cpu].pcpu_mask);
- if (flags & GIC_FLAG_TRANSPARENT)
+ if ((flags & GIC_FLAG_TRANSPARENT) && (cpu_has_veic == 0))
GIC_SET_INTR_MASK(intr);
if (trigtype == GIC_TRIG_EDGE)
gic_irq_flags[intr] |= GIC_IRQ_FLAG_EDGE;
@@ -201,16 +336,27 @@ static void __init gic_basic_init(int numintrs, int numvpes,
struct gic_intr_map *intrmap, int mapsize)
{
unsigned int i, cpu;
+ unsigned int pin_offset = 0;
+
+ board_bind_eic_interrupt = &gic_bind_eic_interrupt;
/* Setup defaults */
for (i = 0; i < numintrs; i++) {
GIC_SET_POLARITY(i, GIC_POL_POS);
GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL);
GIC_CLR_INTR_MASK(i);
- if (i < GIC_NUM_INTRS)
+ if (i < GIC_NUM_INTRS) {
gic_irq_flags[i] = 0;
+ gic_shared_intr_map[i].num_shared_intr = 0;
+ gic_shared_intr_map[i].local_intr_mask = 0;
+ }
}
+ /* In EIC mode, the HW_INT# is offset by (2-1). */
+ /* Need to subtract one because the GIC will add one (since 0=no intr). */
+ if (cpu_has_veic)
+ pin_offset = (GIC_CPU_TO_VEC_OFFSET - GIC_PIN_TO_VEC_OFFSET);
+
/* Setup specifics */
for (i = 0; i < mapsize; i++) {
cpu = intrmap[i].cpunum;
@@ -220,7 +366,7 @@ static void __init gic_basic_init(int numintrs, int numvpes,
continue;
gic_setup_intr(i,
intrmap[i].cpunum,
- intrmap[i].pin,
+ intrmap[i].pin + pin_offset,
intrmap[i].polarity,
intrmap[i].trigtype,
intrmap[i].flags);
@@ -228,8 +374,17 @@ static void __init gic_basic_init(int numintrs, int numvpes,
vpe_local_setup(numvpes);
+#ifdef CONFIG_MIPS_SEAD3
+ /* for non-eic mode, we want to setup the GIC in pass-through mode. */
+ /* That is, as if the GIC don't exist. */
+ if (cpu_has_veic) {
+ for (i = _irqbase; i < (_irqbase + numintrs); i++)
+ irq_set_chip_and_handler(i, &gic_irq_controller, handle_percpu_irq);
+ }
+#else
for (i = _irqbase; i < (_irqbase + numintrs); i++)
irq_set_chip(i, &gic_irq_controller);
+#endif
}
void __init gic_init(unsigned long gic_base_addr,
@@ -251,6 +406,7 @@ void __init gic_init(unsigned long gic_base_addr,
numvpes = (gicconfig & GIC_SH_CONFIG_NUMVPES_MSK) >>
GIC_SH_CONFIG_NUMVPES_SHF;
+ numvpes = numvpes + 1;
pr_debug("%s called\n", __func__);
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 06/10] MIPS: Code formatting fixes.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
` (4 preceding siblings ...)
2012-04-07 16:48 ` [PATCH 05/10] MIPS: GIC interrupt changes for M14K and SEAD-3 support Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-04-07 16:48 ` [PATCH 07/10] MIPS: Add support for early serial debug and LCD device on SEAD-3 Steven J. Hill
` (3 subsequent siblings)
9 siblings, 0 replies; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill
From: "Steven J. Hill" <sjhill@mips.com>
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
arch/mips/kernel/cpu-probe.c | 54 +++++++++++++++++++++---------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 0fccb8c..7d95e62 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -343,7 +343,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R2000";
c->isa_level = MIPS_CPU_ISA_I;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
- MIPS_CPU_NOFPUEX;
+ MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
@@ -364,7 +364,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
}
c->isa_level = MIPS_CPU_ISA_I;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
- MIPS_CPU_NOFPUEX;
+ MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
@@ -390,8 +390,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_WATCH | MIPS_CPU_VCE |
- MIPS_CPU_LLSC;
+ MIPS_CPU_WATCH | MIPS_CPU_VCE |
+ MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_VR41XX:
@@ -437,7 +437,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R4300";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
c->tlbsize = 32;
break;
case PRID_IMP_R4600:
@@ -449,7 +449,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
c->tlbsize = 48;
break;
#if 0
- case PRID_IMP_R4650:
+ case PRID_IMP_R4650:
/*
* This processor doesn't have an MMU, so it's not
* "real easy" to run Linux on it. It is left purely
@@ -458,9 +458,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
*/
c->cputype = CPU_R4650;
__cpu_name[cpu] = "R4650";
- c->isa_level = MIPS_CPU_ISA_III;
+ c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
- c->tlbsize = 48;
+ c->tlbsize = 48;
break;
#endif
case PRID_IMP_TX39:
@@ -491,7 +491,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R4700";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_TX49:
@@ -508,7 +508,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R5000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_R5432:
@@ -516,7 +516,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R5432";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_WATCH | MIPS_CPU_LLSC;
+ MIPS_CPU_WATCH | MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_R5500:
@@ -524,7 +524,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R5500";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_WATCH | MIPS_CPU_LLSC;
+ MIPS_CPU_WATCH | MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_NEVADA:
@@ -532,7 +532,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "Nevada";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
+ MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_R6000:
@@ -540,7 +540,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R6000";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
c->tlbsize = 32;
break;
case PRID_IMP_R6000A:
@@ -548,7 +548,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R6000A";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
c->tlbsize = 32;
break;
case PRID_IMP_RM7000:
@@ -556,7 +556,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "RM7000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
/*
* Undocumented RM7000: Bit 29 in the info register of
* the RM7000 v2.0 indicates if the TLB has 48 or 64
@@ -572,7 +572,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "RM9000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
/*
* Bit 29 in the info register of the RM9000
* indicates if the TLB has 48 or 64 entries.
@@ -587,8 +587,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "RM8000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
- MIPS_CPU_FPU | MIPS_CPU_32FPR |
- MIPS_CPU_LLSC;
+ MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_LLSC;
c->tlbsize = 384; /* has weird TLB: 3-way x 128 */
break;
case PRID_IMP_R10000:
@@ -596,9 +596,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R10000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
- MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
case PRID_IMP_R12000:
@@ -606,9 +606,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R12000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
- MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
case PRID_IMP_R14000:
@@ -616,9 +616,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R14000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
- MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
case PRID_IMP_LOONGSON2:
@@ -742,7 +742,7 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
if (config3 & MIPS_CONF3_VEIC)
c->options |= MIPS_CPU_VEIC;
if (config3 & MIPS_CONF3_MT)
- c->ases |= MIPS_ASE_MIPSMT;
+ c->ases |= MIPS_ASE_MIPSMT;
if (config3 & MIPS_CONF3_ULRI)
c->options |= MIPS_CPU_ULRI;
if (config3 & MIPS_CONF3_CTXTC)
@@ -772,7 +772,7 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c)
/* MIPS32 or MIPS64 compliant CPU. */
c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
- MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+ MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 07/10] MIPS: Add support for early serial debug and LCD device on SEAD-3.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
` (5 preceding siblings ...)
2012-04-07 16:48 ` [PATCH 06/10] MIPS: Code formatting fixes Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-04-07 16:48 ` [PATCH 08/10] MIPS: MIPS32R2 optimisations for pipeline stalls and code size Steven J. Hill
` (2 subsequent siblings)
9 siblings, 0 replies; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill, Douglas Leung, Chris Dearman
From: "Steven J. Hill" <sjhill@mips.com>
Add SEAD-3 support for early serial printk and the address for the
small LCD display. The actual framebuffer support is contained in
another patch.
Signed-off-by: Douglas Leung <douglas@mips.com>
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
arch/mips/include/asm/mips-boards/generic.h | 1 +
arch/mips/kernel/early_printk.c | 25 +++++++++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
index 46c0856..a857264 100644
--- a/arch/mips/include/asm/mips-boards/generic.h
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -29,6 +29,7 @@
*/
#define ASCII_DISPLAY_WORD_BASE 0x1f000410
#define ASCII_DISPLAY_POS_BASE 0x1f000418
+#define LCD_DISPLAY_POS_BASE 0x1f000400 /* SEAD-3 */
/*
diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c
index 9ae813e..e078cae 100644
--- a/arch/mips/kernel/early_printk.c
+++ b/arch/mips/kernel/early_printk.c
@@ -12,6 +12,23 @@
#include <asm/setup.h>
+#ifdef CONFIG_MIPS_SEAD3
+#include <linux/string.h>
+#include <asm/mips-boards/prom.h>
+
+extern void prom_putchar(char, char);
+
+static void __init
+early_console_write(struct console *con, const char *s, unsigned n)
+{
+ while (n-- && *s) {
+ if (*s == '\n')
+ prom_putchar('\r', con->index);
+ prom_putchar(*s, con->index);
+ s++;
+ }
+}
+#else
extern void prom_putchar(char);
static void __init
@@ -24,6 +41,7 @@ early_console_write(struct console *con, const char *s, unsigned n)
s++;
}
}
+#endif
static struct console early_console __initdata = {
.name = "early",
@@ -40,5 +58,12 @@ void __init setup_early_printk(void)
return;
early_console_initialized = 1;
+#ifdef CONFIG_MIPS_SEAD3
+ if ((strstr(prom_getcmdline(), "console=ttyS0")) != NULL)
+ early_console.index = 0;
+ else if ((strstr(prom_getcmdline(), "console=ttyS1")) != NULL)
+ early_console.index = 1;
+#endif
+
register_console(&early_console);
}
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 08/10] MIPS: MIPS32R2 optimisations for pipeline stalls and code size.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
` (6 preceding siblings ...)
2012-04-07 16:48 ` [PATCH 07/10] MIPS: Add support for early serial debug and LCD device on SEAD-3 Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-04-07 16:48 ` [PATCH 09/10] cobalt_lcdfb: LCD panel framebuffer support for SEAD-3 platform Steven J. Hill
2012-04-07 16:48 ` [PATCH 10/10] usb: host: mips: sead3: USB Host controller " Steven J. Hill
9 siblings, 0 replies; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill
From: "Steven J. Hill" <sjhill@mips.com>
If the CPU type is selected as MIPS32R2, then we can surround
some code with #ifdef's to reduce the binary size. Detect when
to use 'ehb' instruction to avoid pipeline stalls.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
arch/mips/mm/tlbex.c | 33 ++++++++++++++++++++++++++++-----
1 file changed, 28 insertions(+), 5 deletions(-)
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 4db0d19..87f57ae 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -74,10 +74,12 @@ static inline int __maybe_unused bcm1250_m3_war(void)
return BCM1250_M3_WAR;
}
+#ifndef CONFIG_CPU_MIPS32_R2
static inline int __maybe_unused r10000_llsc_war(void)
{
return R10000_LLSC_WAR;
}
+#endif
static int use_bbit_insns(void)
{
@@ -340,6 +342,7 @@ static void __cpuinit build_restore_work_registers(u32 **p)
*/
extern unsigned long pgd_current[];
+# ifndef CONFIG_CPU_MIPS32_R2
/*
* The R3000 TLB handler is simple.
*/
@@ -379,6 +382,7 @@ static void __cpuinit build_r3000_tlb_refill_handler(void)
dump_handler((u32 *)ebase, 32);
}
+# endif /* !CONFIG_CPU_MIPS32_R2 */
#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */
/*
@@ -449,8 +453,23 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
}
if (cpu_has_mips_r2) {
- if (cpu_has_mips_r2_exec_hazard)
- uasm_i_ehb(p);
+ /*
+ * The architecture spec says an ehb is required here,
+ * but a number of cores do not have the hazard and
+ * using an ehb causes an expensive pipeline stall.
+ */
+ if (cpu_has_mips_r2_exec_hazard) {
+ switch (current_cpu_type()) {
+ case CPU_14K:
+ case CPU_74K:
+ case CPU_1074K:
+ break;
+
+ default:
+ uasm_i_ehb(p);
+ break;
+ }
+ }
tlbw(p);
return;
}
@@ -910,7 +929,7 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
#else
/*
* smp_processor_id() << 3 is stored in CONTEXT.
- */
+ */
uasm_i_mfc0(p, ptr, C0_CONTEXT);
UASM_i_LA_mostly(p, tmp, pgdc);
uasm_i_srl(p, ptr, ptr, 23);
@@ -1513,9 +1532,11 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
# endif
UASM_i_SC(p, pte, 0, ptr);
+#ifndef CONFIG_CPU_MIPS32_R2
if (r10000_llsc_war())
uasm_il_beqzl(p, r, pte, label_smp_pgtable_change);
else
+#endif
uasm_il_beqz(p, r, pte, label_smp_pgtable_change);
# ifdef CONFIG_64BIT_PHYS_ADDR
@@ -1649,7 +1670,7 @@ build_pte_modifiable(u32 **p, struct uasm_reloc **r,
}
}
-#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
+#if !defined(CONFIG_MIPS_PGD_C0_CONTEXT) && !defined(CONFIG_CPU_MIPS32_R2)
/*
@@ -1803,7 +1824,7 @@ static void __cpuinit build_r3000_tlb_modify_handler(void)
dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm));
}
-#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */
+#endif /* !CONFIG_MIPS_PGD_C0_CONTEXT && !CONFIG_CPU_MIPS32_R2 */
/*
* R4000 style TLB load/store/modify handlers.
@@ -2120,6 +2141,7 @@ void __cpuinit build_tlb_refill_handler(void)
#endif
switch (current_cpu_type()) {
+#ifndef CONFIG_CPU_MIPS32_R2
case CPU_R2000:
case CPU_R3000:
case CPU_R3000A:
@@ -2149,6 +2171,7 @@ void __cpuinit build_tlb_refill_handler(void)
panic("No R8000 TLB refill handler yet");
break;
+#endif /* !CONFIG_CPU_MIPS32_R2 */
default:
if (!run_once) {
scratch_reg = allocate_kscratch();
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 09/10] cobalt_lcdfb: LCD panel framebuffer support for SEAD-3 platform.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
` (7 preceding siblings ...)
2012-04-07 16:48 ` [PATCH 08/10] MIPS: MIPS32R2 optimisations for pipeline stalls and code size Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
2012-04-07 16:48 ` [PATCH 10/10] usb: host: mips: sead3: USB Host controller " Steven J. Hill
9 siblings, 0 replies; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill, Douglas Leung, Chris Dearman
From: "Steven J. Hill" <sjhill@mips.com>
Add support for LCD panel on MIPS SEAD-3 development platform.
Signed-off-by: Douglas Leung <douglas@mips.com>
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
drivers/video/Kconfig | 2 +-
drivers/video/cobalt_lcdfb.c | 45 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 45 insertions(+), 2 deletions(-)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a8a897a..e921a45 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2210,7 +2210,7 @@ config FB_XILINX
config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
- depends on FB && MIPS_COBALT
+ depends on FB && (MIPS_COBALT || MIPS_SEAD3)
config FB_SH7760
bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index f56699d..eae46f6 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -1,7 +1,8 @@
/*
- * Cobalt server LCD frame buffer driver.
+ * Cobalt/SEAD3 LCD frame buffer driver.
*
* Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
+ * Copyright (C) 2012 MIPS Technologies, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -62,6 +63,7 @@
#define LCD_CUR_POS(x) ((x) & LCD_CUR_POS_MASK)
#define LCD_TEXT_POS(x) ((x) | LCD_TEXT_MODE)
+#ifdef CONFIG_MIPS_COBALT
static inline void lcd_write_control(struct fb_info *info, u8 control)
{
writel((u32)control << 24, info->screen_base);
@@ -81,6 +83,47 @@ static inline u8 lcd_read_data(struct fb_info *info)
{
return readl(info->screen_base + LCD_DATA_REG_OFFSET) >> 24;
}
+#else
+
+#define LCD_CTL 0x00
+#define LCD_DATA 0x08
+#define CPLD_STATUS 0x10
+#define CPLD_DATA 0x18
+
+static inline void cpld_wait(struct fb_info *info)
+{
+ do {
+ } while (readl(info->screen_base + CPLD_STATUS) & 1);
+}
+
+static inline void lcd_write_control(struct fb_info *info, u8 control)
+{
+ cpld_wait(info);
+ writel(control, info->screen_base + LCD_CTL);
+}
+
+static inline u8 lcd_read_control(struct fb_info *info)
+{
+ cpld_wait(info);
+ readl(info->screen_base + LCD_CTL);
+ cpld_wait(info);
+ return readl(info->screen_base + CPLD_DATA) & 0xff;
+}
+
+static inline void lcd_write_data(struct fb_info *info, u8 data)
+{
+ cpld_wait(info);
+ writel(data, info->screen_base + LCD_DATA);
+}
+
+static inline u8 lcd_read_data(struct fb_info *info)
+{
+ cpld_wait(info);
+ readl(info->screen_base + LCD_DATA);
+ cpld_wait(info);
+ return readl(info->screen_base + CPLD_DATA) & 0xff;
+}
+#endif
static int lcd_busy_wait(struct fb_info *info)
{
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 10/10] usb: host: mips: sead3: USB Host controller support for SEAD-3 platform.
2012-04-07 16:48 [PATCH 00/10] Add support MIPS SEAD-3 Development Platform Steven J. Hill
` (8 preceding siblings ...)
2012-04-07 16:48 ` [PATCH 09/10] cobalt_lcdfb: LCD panel framebuffer support for SEAD-3 platform Steven J. Hill
@ 2012-04-07 16:48 ` Steven J. Hill
9 siblings, 0 replies; 23+ messages in thread
From: Steven J. Hill @ 2012-04-07 16:48 UTC (permalink / raw)
To: linux-mips, ralf; +Cc: Steven J. Hill, Chris Dearman
From: "Steven J. Hill" <sjhill@mips.com>
Add EHCI driver for MIPS SEAD-3 development platform.
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Steven J. Hill <sjhill@mips.com>
---
drivers/usb/host/Kconfig | 4 +-
drivers/usb/host/ehci-hcd.c | 5 +
drivers/usb/host/ehci-sead3.c | 299 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 306 insertions(+), 2 deletions(-)
create mode 100644 drivers/usb/host/ehci-sead3.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index f788eb8..db29a9f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -110,13 +110,13 @@ config USB_EHCI_BIG_ENDIAN_MMIO
depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
PPC_MPC512x || CPU_CAVIUM_OCTEON || \
- PMC_MSP || SPARC_LEON)
+ PMC_MSP || SPARC_LEON || MIPS_SEAD3)
default y
config USB_EHCI_BIG_ENDIAN_DESC
bool
depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
- PPC_MPC512x || PMC_MSP || SPARC_LEON)
+ PPC_MPC512x || PMC_MSP || SPARC_LEON || MIPS_SEAD3)
default y
config XPS_USB_HCD_XILINX
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index aede637..30563ff 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1371,6 +1371,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_ls1x_driver
#endif
+#ifdef CONFIG_MIPS_SEAD3
+#include "ehci-sead3.c"
+#define PLATFORM_DRIVER ehci_hcd_mips_driver
+#endif
+
#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
#include "ehci-platform.c"
#define PLATFORM_DRIVER ehci_platform_driver
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
new file mode 100644
index 0000000..743a0c1
--- /dev/null
+++ b/drivers/usb/host/ehci-sead3.c
@@ -0,0 +1,299 @@
+/*
+ * MIPS CI13320A EHCI Host Controller driver
+ * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_PM
+static void mips_start_ehc(void)
+{
+ pr_debug("mips_start_ehc\n");
+}
+#endif
+
+static void mips_stop_ehc(void)
+{
+ pr_debug("mips_start_ehc\n");
+}
+
+static int mips_run(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 temp;
+
+ temp = ehci_reset(ehci);
+ if (temp != 0) {
+ ehci_mem_cleanup(ehci);
+ return temp;
+ }
+
+ return ehci_run(hcd);
+}
+
+const struct hc_driver ehci_mips_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "MIPS EHCI",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ *
+ */
+ .reset = ehci_init,
+ .start = mips_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+};
+
+static int ehci_hcd_mips_drv_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+ pr_debug("resource[1] is not IORESOURCE_IRQ");
+ return -ENOMEM;
+ }
+ hcd = usb_create_hcd(&ehci_mips_hc_driver, &pdev->dev, "MIPS");
+ if (!hcd)
+ return -ENOMEM;
+
+ hcd->rsrc_start = pdev->resource[0].start;
+ hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ pr_debug("request_mem_region failed");
+ ret = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ pr_debug("ioremap failed");
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ hcd->has_tt = 1;
+
+ ehci = hcd_to_ehci(hcd);
+ ehci->caps = hcd->regs + 0x100;
+ ehci->regs = hcd->regs + 0x100 +
+ HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+ /* SEAD-3 EHCI matches CPU endianness. */
+#ifdef __BIG_ENDIAN
+ ehci->big_endian_mmio = 1;
+ ehci->big_endian_desc = 1;
+#endif
+
+ /* Set burst length to 16 words */
+ /* FIXME: should be tunable */
+ ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]);
+
+ ret = usb_add_hcd(hcd, pdev->resource[1].start,
+ IRQF_DISABLED | IRQF_SHARED);
+ if (ret == 0) {
+ platform_set_drvdata(pdev, hcd);
+ return ret;
+ }
+
+ mips_stop_ehc();
+ iounmap(hcd->regs);
+err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+static int ehci_hcd_mips_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ mips_stop_ehc();
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ehci_hcd_mips_drv_suspend(struct platform_device *pdev,
+ pm_message_t message)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ unsigned long flags;
+ int rc;
+
+ return 0;
+ rc = 0;
+
+ if (time_before(jiffies, ehci->next_statechange))
+ msleep(10);
+
+ /* Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ *
+ * This is still racy as hcd->state is manipulated outside of
+ * any locks =P But that will be a different fix.
+ */
+ spin_lock_irqsave(&ehci->lock, flags);
+ if (hcd->state != HC_STATE_SUSPENDED) {
+ rc = -EINVAL;
+ goto bail;
+ }
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+ (void)ehci_readl(ehci, &ehci->regs->intr_enable);
+
+ /* make sure snapshot being resumed re-enumerates everything */
+ if (message.event == PM_EVENT_PRETHAW) {
+ ehci_halt(ehci);
+ ehci_reset(ehci);
+ }
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ mips_stop_ehc();
+
+bail:
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ /* could save FLADJ in case of Vaux power loss */
+ /* ... we'd only use it to handle clock skew */
+
+ return rc;
+}
+
+
+static int ehci_hcd_mips_drv_resume(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ mips_start_ehc();
+
+ /* maybe restore FLADJ */
+
+ if (time_before(jiffies, ehci->next_statechange))
+ msleep(100);
+
+ /* Mark hardware accessible again as we are out of D3 state by now */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ /* If CF is still set, we maintained PCI Vaux power.
+ * Just undo the effect of ehci_pci_suspend().
+ */
+ if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+ int mask = INTR_MASK;
+
+ if (!hcd->self.root_hub->do_remote_wakeup)
+ mask &= ~STS_PCD;
+ ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+ ehci_readl(ehci, &ehci->regs->intr_enable);
+ return 0;
+ }
+
+ ehci_dbg(ehci, "lost power, restarting\n");
+ usb_root_hub_lost_power(hcd->self.root_hub);
+
+ /* Else reset, to cope with power loss or flush-to-storage
+ * style "resume" having let BIOS kick in during reboot.
+ */
+ (void) ehci_halt(ehci);
+ (void) ehci_reset(ehci);
+
+ /* emptying the schedule aborts any urbs */
+ spin_lock_irq(&ehci->lock);
+ if (ehci->reclaim)
+ end_unlink_async(ehci);
+ ehci_work(ehci);
+ spin_unlock_irq(&ehci->lock);
+
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+
+ /* here we "know" root ports should always stay powered */
+ ehci_port_power(ehci, 1);
+
+ hcd->state = HC_STATE_SUSPENDED;
+
+ return 0;
+}
+
+#else
+#define ehci_hcd_mips_drv_suspend NULL
+#define ehci_hcd_mips_drv_resume NULL
+#endif
+
+static struct platform_driver ehci_hcd_mips_driver = {
+ .probe = ehci_hcd_mips_drv_probe,
+ .remove = ehci_hcd_mips_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .suspend = ehci_hcd_mips_drv_suspend,
+ .resume = ehci_hcd_mips_drv_resume,
+ .driver = {
+ .name = "sead3-ehci",
+ .owner = THIS_MODULE,
+ }
+};
+
+MODULE_ALIAS("platform:sead3-ehci");
--
1.7.9.6
^ permalink raw reply related [flat|nested] 23+ messages in thread