All of lore.kernel.org
 help / color / mirror / Atom feed
From: xiong <xiong@qca.qualcomm.com>
To: <davem@davemloft.net>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: <qca-linux-team@qualcomm.com>, <nic-devel@qualcomm.com>,
	xiong <xiong@qca.qualcomm.com>
Subject: [PATCH 04/37] atl1c: remove VPD register
Date: Fri, 13 Apr 2012 08:14:29 +0800	[thread overview]
Message-ID: <1334276102-15866-5-git-send-email-xiong@qca.qualcomm.com> (raw)
In-Reply-To: <1334276102-15866-1-git-send-email-xiong@qca.qualcomm.com>

VPD register is only used for L1(devid=PCI_DEVICE_ID_ATTANSIC_L1) to
access external NV-memory.
l1c & later chip doesn't use it any more.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c |    1 -
 drivers/net/ethernet/atheros/atl1c/atl1c_hw.h      |   11 -----------
 2 files changed, 0 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c b/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
index 0a9326a..ce63615 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
@@ -142,7 +142,6 @@ static void atl1c_get_regs(struct net_device *netdev,
 	memset(p, 0, AT_REGS_LEN);
 
 	regs->version = 0;
-	AT_READ_REG(hw, REG_VPD_CAP, 		  p++);
 	AT_READ_REG(hw, REG_PM_CTRL, 		  p++);
 	AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL,  p++);
 	AT_READ_REG(hw, REG_TWSI_CTRL, 		  p++);
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index c22d698..f5c7473 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
@@ -59,17 +59,6 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
 #define LINK_CTRL_L1_EN			0x02
 #define LINK_CTRL_EXT_SYNC		0x80
 
-#define REG_VPD_CAP			0x6C
-#define VPD_CAP_ID_MASK                 0xff
-#define VPD_CAP_ID_SHIFT                0
-#define VPD_CAP_NEXT_PTR_MASK           0xFF
-#define VPD_CAP_NEXT_PTR_SHIFT          8
-#define VPD_CAP_VPD_ADDR_MASK           0x7FFF
-#define VPD_CAP_VPD_ADDR_SHIFT          16
-#define VPD_CAP_VPD_FLAG                0x80000000
-
-#define REG_VPD_DATA                	0x70
-
 #define REG_PCIE_UC_SEVERITY		0x10C
 #define PCIE_UC_SERVRITY_TRN		0x00000001
 #define PCIE_UC_SERVRITY_DLP		0x00000010
-- 
1.7.7


  parent reply	other threads:[~2012-04-13  0:15 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-13  0:14 [PATCH 00/37] atl1c: update hardware settings xiong
2012-04-13  0:14 ` [PATCH 01/37] atl1c: update author contact info & company/driver desciption xiong
2012-04-13  0:14 ` [PATCH 02/37] atl1c: remove multiple-RX-Q code xiong
2012-04-13  0:14 ` [PATCH 03/37] atl1c: remove HDS register xiong
2012-04-13  0:14 ` xiong [this message]
2012-04-14  0:45   ` [PATCH 04/37] atl1c: remove VPD register David Miller
2012-04-14  9:12     ` Huang, Xiong
2012-04-14 14:22       ` Ben Hutchings
2012-04-14 18:24         ` David Miller
2012-04-17  8:36         ` Huang, Xiong
2012-04-17  8:36           ` Huang, Xiong
2012-04-13  0:14 ` [PATCH 05/37] atl1c: remove SMB/CMB DMA related code xiong
2012-04-13  0:14 ` [PATCH 06/37] atl1c: split 2 32bit registers of TPD to 4 16bit registers xiong
2012-04-13  0:14 ` [PATCH 07/37] atl1c: remove code related to rxq 1/2/3 xiong
2012-04-13  0:14 ` [PATCH 08/37] atl1c: wrong register used to stop TXQ xiong
2012-04-13  0:14 ` [PATCH 09/37] atl1c: correct wrong definition of REG_DMA_CTRL xiong
2012-04-13  0:14 ` [PATCH 10/37] atl1c: remove dmaw_block xiong
2012-04-13  0:14 ` [PATCH 11/37] atl1c: using fixed TXQ configuration for l2cb and l1c xiong
2012-04-13  0:14 ` [PATCH 12/37] atl1c: restore max-read-request-size in Device Conrol Register xiong
2012-04-13 17:02   ` Ben Hutchings
2012-04-14 10:39     ` Huang, Xiong
2012-04-14 10:39       ` Huang, Xiong
2012-04-14 10:39       ` Huang, Xiong
2012-04-13  0:14 ` [PATCH 13/37] atl1c: threshold for ASPM is changed based on chip capability xiong
2012-04-13  0:14 ` [PATCH 14/37] atl1c: add module parameter for l1c_wait_until_idle xiong
2012-04-13  0:14 ` [PATCH 15/37] atl1c: update right threshold for TSO xiong
2012-04-13  0:14 ` [PATCH 16/37] atl1c: remove dmar_dly_cnt and dmaw_dly_cnt xiong
2012-04-13  0:14 ` [PATCH 17/37] atl1c: clear PCIE error status in atl1c_reset_pcie xiong
2012-04-13  0:14 ` [PATCH 18/37] atl1c: refine reg definition of REG_MASTER_CTRL xiong
2012-04-13  0:14 ` [PATCH 19/37] atl1c: clear bit MASTER_CTRL_CLK_SEL_DIS in atl1c_pcie_patch xiong
2012-04-13  0:14 ` [PATCH 20/37] atl1c: refine/update ASPM configuration xiong
2012-04-13  0:14 ` [PATCH 21/37] atl1c: refine atl1c_pcie_patch xiong
2012-04-13  0:14 ` [PATCH 22/37] atl1c: fix WoL(magic) issue for l2cb 1.1 xiong
2012-04-13  0:14 ` [PATCH 23/37] atl1c: remove MDIO_REG_ADDR_MASK in atl1c_mdio_read/write xiong
2012-04-13  0:14 ` [PATCH 24/37] atl1c: remove REG_PHY_STATUS xiong
2012-04-13  0:14 ` [PATCH 25/37] atl1c: refine phy-register read/write function xiong
2012-04-13  0:14 ` [PATCH 26/37] atl1c: remove PHY contrl in atl1c_reset_pcie xiong
2012-04-13  0:14 ` [PATCH 27/37] atl1c: refine SERDES-clock related code xiong
2012-04-13  0:14 ` [PATCH 28/37] atl1c: remove PHY polling from atl1c_open xiong
2012-04-13  0:14 ` [PATCH 29/37] atl1c: update PHY reset related routine xiong
2012-04-13  0:14 ` [PATCH 30/37] atl1c: remove PHY reset/init for link down event xiong
2012-04-13  0:14 ` [PATCH 31/37] atl1c: add function atl1c_power_saving xiong
2012-04-13  0:14 ` [PATCH 32/37] atl1c: refine start/enable code for MAC module xiong
2012-04-13  0:14 ` [PATCH 33/37] atl1c: add PHY link event(up/down) patch xiong
2012-04-13  0:14 ` [PATCH 34/37] atl1c: clear WoL status when reset pcie xiong
2012-04-13  0:15 ` [PATCH 35/37] atl1c: remove code of closing register writable attribution xiong
2012-04-13  0:15 ` [PATCH 36/37] atl1c: refine mac address related code xiong
2012-04-13  0:15 ` [PATCH 37/37] atl1c: cancel task when interface closed xiong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1334276102-15866-5-git-send-email-xiong@qca.qualcomm.com \
    --to=xiong@qca.qualcomm.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic-devel@qualcomm.com \
    --cc=qca-linux-team@qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.