* [PATCH 1/1] Add Foxconn / Hon Hai IDs for btusb module
@ 2012-04-13 18:45 Steven Harms
2012-04-13 22:32 ` Gustavo Padovan
2012-05-29 12:03 ` [3.0.y, 3.2.y] " Jonathan Nieder
0 siblings, 2 replies; 4+ messages in thread
From: Steven Harms @ 2012-04-13 18:45 UTC (permalink / raw)
To: Steven Harms, Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
linux-bluetooth, linux-kernel
This change adds 0x0489:0xe033 to the btusb module.
This bluetooth usb device is integrated in the Acer TimelineX AS4830TG-6808 notebook.
Output from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e033 Rev= 2.29
S: Manufacturer=Broadcom Corp
S: Product=Acer Module
S: SerialNumber=60D819F74101
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Signed-off-by: Steven Harms <sjharms@gmail.com>
---
drivers/bluetooth/btusb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3311b81..7d7d614 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -107,6 +107,9 @@ static struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x0a5c, 0x21f3) },
{ USB_DEVICE(0x413c, 0x8197) },
+ /* Foxconn - Hon Hai */
+ { USB_DEVICE(0x0489, 0xe033) },
+
{ } /* Terminating entry */
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 1/1] Add Foxconn / Hon Hai IDs for btusb module
2012-04-13 18:45 [PATCH 1/1] Add Foxconn / Hon Hai IDs for btusb module Steven Harms
@ 2012-04-13 22:32 ` Gustavo Padovan
2012-05-29 12:03 ` [3.0.y, 3.2.y] " Jonathan Nieder
1 sibling, 0 replies; 4+ messages in thread
From: Gustavo Padovan @ 2012-04-13 22:32 UTC (permalink / raw)
To: Steven Harms
Cc: Marcel Holtmann, Johan Hedberg, linux-bluetooth, linux-kernel
Hi Steven,
* Steven Harms <sjharms@gmail.com> [2012-04-13 14:45:55 -0400]:
> This change adds 0x0489:0xe033 to the btusb module.
>
> This bluetooth usb device is integrated in the Acer TimelineX AS4830TG-6808 notebook.
You should break lines on column 80. I fixed this one for you.
> Output from /sys/kernel/debug/usb/devices:
>
> T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0489 ProdID=e033 Rev= 2.29
> S: Manufacturer=Broadcom Corp
> S: Product=Acer Module
> S: SerialNumber=60D819F74101
> C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
>
> Signed-off-by: Steven Harms <sjharms@gmail.com>
> ---
> drivers/bluetooth/btusb.c | 3 +++
> 1 file changed, 3 insertions(+)
Patch is applied to both bluetooth and bluetooth-next. Thanks.
Gustavo
^ permalink raw reply [flat|nested] 4+ messages in thread
* [3.0.y, 3.2.y] Re: [PATCH 1/1] Add Foxconn / Hon Hai IDs for btusb module
2012-04-13 18:45 [PATCH 1/1] Add Foxconn / Hon Hai IDs for btusb module Steven Harms
2012-04-13 22:32 ` Gustavo Padovan
@ 2012-05-29 12:03 ` Jonathan Nieder
2012-06-01 9:17 ` Greg KH
1 sibling, 1 reply; 4+ messages in thread
From: Jonathan Nieder @ 2012-05-29 12:03 UTC (permalink / raw)
To: stable
Cc: Steven Harms, Marcel Holtmann, Gustavo Padovan, Johan Hedberg,
linux-bluetooth, linux-kernel
Hi Ben and Greg,
Steven Harms wrote:
> This change adds 0x0489:0xe033 to the btusb module.
>
> This bluetooth usb device is integrated in the Acer TimelineX
> AS4830TG-6808 notebook.
[...]
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -107,6 +107,9 @@ static struct usb_device_id btusb_table[] = {
> { USB_DEVICE(0x0a5c, 0x21f3) },
> { USB_DEVICE(0x413c, 0x8197) },
>
> + /* Foxconn - Hon Hai */
> + { USB_DEVICE(0x0489, 0xe033) },
> +
> { } /* Terminating entry */
Please consider
985140369be1 Add Foxconn / Hon Hai IDs for btusb module
for application to the 3.0.y and 3.2.y kernels. The driver was
tested by Steven Harms on a Acer TimelineX AS4830TG-6808 using
Ubuntu's 3.2.y-based kernel: http://www.sharms.org/blog/2012/04/
Thanks,
Jonathan
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [3.0.y, 3.2.y] Re: [PATCH 1/1] Add Foxconn / Hon Hai IDs for btusb module
2012-05-29 12:03 ` [3.0.y, 3.2.y] " Jonathan Nieder
@ 2012-06-01 9:17 ` Greg KH
0 siblings, 0 replies; 4+ messages in thread
From: Greg KH @ 2012-06-01 9:17 UTC (permalink / raw)
To: Jonathan Nieder
Cc: stable, Steven Harms, Marcel Holtmann, Gustavo Padovan,
Johan Hedberg, linux-bluetooth, linux-kernel
On Tue, May 29, 2012 at 07:03:12AM -0500, Jonathan Nieder wrote:
> Hi Ben and Greg,
>
> Steven Harms wrote:
>
> > This change adds 0x0489:0xe033 to the btusb module.
> >
> > This bluetooth usb device is integrated in the Acer TimelineX
> > AS4830TG-6808 notebook.
> [...]
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -107,6 +107,9 @@ static struct usb_device_id btusb_table[] = {
> > { USB_DEVICE(0x0a5c, 0x21f3) },
> > { USB_DEVICE(0x413c, 0x8197) },
> >
> > + /* Foxconn - Hon Hai */
> > + { USB_DEVICE(0x0489, 0xe033) },
> > +
> > { } /* Terminating entry */
>
> Please consider
>
> 985140369be1 Add Foxconn / Hon Hai IDs for btusb module
>
> for application to the 3.0.y and 3.2.y kernels. The driver was
> tested by Steven Harms on a Acer TimelineX AS4830TG-6808 using
> Ubuntu's 3.2.y-based kernel: http://www.sharms.org/blog/2012/04/
Applied to 3.0-stable, thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-06-01 16:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-13 18:45 [PATCH 1/1] Add Foxconn / Hon Hai IDs for btusb module Steven Harms
2012-04-13 22:32 ` Gustavo Padovan
2012-05-29 12:03 ` [3.0.y, 3.2.y] " Jonathan Nieder
2012-06-01 9:17 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.