[PATCH 0 of 4 v2] xl: add support for vif rate limiting

[PATCH 0 of 4 v2] xl: add support for vif rate limiting

[Mathieu Gagné]

Hi,

This patch series implements the required plumbering for vif rate limiting in libxl/xl.

The first patch fixes trivial indentation issues and introduces no functional changes.

The second patch implements dry-run for `xl network-attach` for debugging and testing purposes.

The third patch adds the required plumbering in libxl/xl to add vif rate limiting support. It uses the `rate` option syntax from xm/xend, ensuring full backward compatiblity.

The final patch adds the "check-xl-vif-parse" test script which tests various `rate` syntax.

Changes in v2:
- Don't default to unlimited in case of overflow/underflow or invalid syntax in rate
- Add error handling
- Remove use of matches in regex which weren't used anyway
- Add docs about the syntax
- Add note in docs explaining that limitations are netback implementation specific
- Modify test cases according to new behavior

Please comment on the overflow and error handling.

Sorry for the delay.

--
Mathieu

[PATCH 1 of 4 v2] xl: cleanup indentation

[Mathieu Gagné]

Signed-off-by: Mathieu Gagné <mgagne@iweb.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -847,10 +847,10 @@ static void parse_config_data(const char
                 nic->script = strdup(default_vifscript);
             }
 
-	    if (default_bridge) {
-		free(nic->bridge);
-		nic->bridge = strdup(default_bridge);
-	    }
+            if (default_bridge) {
+                free(nic->bridge);
+                nic->bridge = strdup(default_bridge);
+            }
 
             p = strtok(buf2, ",");
             if (!p)
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

[PATCH 2 of 4 v2] xl: xl network-attach -N (dry run) option

[Mathieu Gagné]

Add dryrun for testing and debugging purposes.

Signed-off-by: Mathieu Gagné <mgagne@iweb.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -4916,6 +4916,16 @@ int main_networkattach(int argc, char **
             return 1;
         }
     }
+
+    if (dryrun_only) {
+        char *json = libxl_device_nic_to_json(ctx, &nic);
+        printf("vif: %s\n", json);
+        free(json);
+        libxl_device_nic_dispose(&nic);
+        if (ferror(stdout) || fflush(stdout)) { perror("stdout"); exit(-1); }
+        return 0;
+    }
+
     if (libxl_device_nic_add(ctx, domid, &nic)) {
         fprintf(stderr, "libxl_device_nic_add failed.\n");
         return 1;
diff --git a/tools/libxl/xl_cmdtable.c b/tools/libxl/xl_cmdtable.c
--- a/tools/libxl/xl_cmdtable.c
+++ b/tools/libxl/xl_cmdtable.c
@@ -288,7 +288,7 @@ struct cmd_spec cmd_table[] = {
       "",
     },
     { "network-attach",
-      &main_networkattach, 0,
+      &main_networkattach, 1,
       "Create a new virtual network device",
       "<Domain> [type=<type>] [mac=<mac>] [bridge=<bridge>] "
       "[ip=<ip>] [script=<script>] [backend=<BackDomain>] [vifname=<name>] "
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

[PATCH 3 of 4 v2] xl: add support for vif rate limiting

[Mathieu Gagné]

The `rate` keyword specifies the rate at which the outgoing traffic will be limited to.
The default if this keyword is not specified is unlimited.

The `rate` keyword supports an optional replenishment interval parameter for specifying
the granularity of credit replenishment. It determines the frequency at which
the vif transmission credit is replenished. The default interval is 50ms.

For example:

        'rate=10Mb/s'
        'rate=250KB/s'
        'rate=1MB/s@20ms'

Signed-off-by: Mathieu Gagné <mgagne@iweb.com>

diff --git a/docs/misc/xl-network-configuration.markdown b/docs/misc/xl-network-configuration.markdown
--- a/docs/misc/xl-network-configuration.markdown
+++ b/docs/misc/xl-network-configuration.markdown
@@ -122,5 +122,34 @@ Specifies the backend domain which this 
 defaults to domain 0. Specifying another domain requires setting up a
 driver domain which is outside the scope of this document.
 
+### rate
+
+Specifies the rate at which the outgoing traffic will be limited to.
+The default if this keyword is not specified is unlimited.
+
+The rate may be specified as "<RATE>/s" or optionally "<RATE>/s@<INTERVAL>".
+
+  * `RATE` is in bytes and can accept suffixes:
+      * GB, MB, KB, B for bytes.
+      * Gb, Mb, Kb, b for bits.
+  * `INTERVAL` is in microseconds and can accept suffixes: ms, us, s.
+    It determines the frequency at which the vif transmission credit
+    is replenished. The default is 50ms.
+
+Vif rate limiting is credit-based. It means that for "1MB/s@20ms", the
+available credit will be equivalent of the traffic you would have done
+at "1MB/s" during 20ms. This will results in a credit of 20,000 bytes
+replenished every 20,000 us.
+
+For example:
+
+        'rate=10Mb/s' -- meaning up to 10 megabits every second
+        'rate=250KB/s' -- meaning up to 250 kilobytes every second
+        'rate=1MB/s@20ms' -- meaning 20,000 bytes in every 20 millisecond period
+
+NOTE: The actual underlying limits of rate limiting are dependent
+on the underlying netback implementation.
+
+
 [oui]: http://en.wikipedia.org/wiki/Organizationally_Unique_Identifier
 [net]: http://wiki.xen.org/wiki/HostConfiguration/Networking
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -61,7 +61,7 @@ LIBXL_OBJS += _libxl_types.o libxl_flask
 AUTOINCS= libxlu_cfg_y.h libxlu_cfg_l.h _libxl_list.h
 AUTOSRCS= libxlu_cfg_y.c libxlu_cfg_l.c
 LIBXLU_OBJS = libxlu_cfg_y.o libxlu_cfg_l.o libxlu_cfg.o \
-	libxlu_disk_l.o libxlu_disk.o libxlu_pci.o
+	libxlu_disk_l.o libxlu_disk.o libxlu_vif.o libxlu_pci.o
 $(LIBXLU_OBJS): CFLAGS += $(CFLAGS_libxenctrl) # For xentoollog.h
 
 CLIENTS = xl testidl
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -1854,6 +1854,13 @@ int libxl_device_nic_add(libxl_ctx *ctx,
         flexarray_append(back, libxl__strdup(gc, nic->ip));
     }
 
+    if (nic->rate_interval_usecs > 0) {
+        flexarray_append(back, "rate");
+        flexarray_append(back, libxl__sprintf(gc, "%llu,%lu",
+                            (unsigned long long) nic->rate_bytes_per_interval,
+                            (unsigned long) nic->rate_interval_usecs));
+    }
+
     flexarray_append(back, "bridge");
     flexarray_append(back, libxl__strdup(gc, nic->bridge));
     flexarray_append(back, "handle");
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -343,6 +343,8 @@ libxl_device_nic = Struct("device_nic", 
     ("ifname", string),
     ("script", string),
     ("nictype", libxl_nic_type),
+    ("rate_bytes_per_interval", uint64),
+    ("rate_interval_usecs", uint32),
     ])
 
 libxl_device_pci = Struct("device_pci", [
diff --git a/tools/libxl/libxlu_internal.h b/tools/libxl/libxlu_internal.h
--- a/tools/libxl/libxlu_internal.h
+++ b/tools/libxl/libxlu_internal.h
@@ -17,9 +17,11 @@
 #define LIBXLU_INTERNAL_H
 
 #include <stdio.h>
+#include <stdlib.h>
 #include <errno.h>
 #include <string.h>
 #include <assert.h>
+#include <regex.h>
 
 #define XLU_ConfigList XLU_ConfigSetting
 
diff --git a/tools/libxl/libxlu_vif.c b/tools/libxl/libxlu_vif.c
new file mode 100644
--- /dev/null
+++ b/tools/libxl/libxlu_vif.c
@@ -0,0 +1,141 @@
+#include "libxl_osdeps.h" /* must come before any other headers */
+#include "libxlu_internal.h"
+
+static const char *vif_bytes_per_sec_re = "^[0-9]+[GMK]?[Bb]/s$";
+static const char *vif_internal_usec_re = "^[0-9]+[mu]?s?$";
+
+static void xlu__vif_err(XLU_Config *cfg, const char *msg, const char *rate) {
+    fprintf(cfg->report,
+            "%s: config parsing error in vif: %s in `%s'\n",
+            cfg->filename, msg, rate);
+}
+
+static int vif_parse_rate_bytes_per_sec(XLU_Config *cfg, const char *bytes,
+                                        uint64_t *bytes_per_sec)
+{
+    regex_t rec;
+    uint64_t tmp = 0;
+    const char *p;
+    int rc = 0;
+
+    regcomp(&rec, vif_bytes_per_sec_re, REG_EXTENDED|REG_NOSUB);
+    if (regexec(&rec, bytes, 0, NULL, 0)) {
+        xlu__vif_err(cfg, "invalid rate", bytes);
+        rc = EINVAL;
+        goto out;
+    }
+
+    p = bytes;
+    tmp = strtoull(p, (char**)&p, 0);
+    if (tmp == 0 || tmp > UINT32_MAX || errno == ERANGE) {
+        xlu__vif_err(cfg, "rate overflow", bytes);
+        rc = EOVERFLOW;
+        goto out;
+    }
+
+    if (*p == 'G')
+       tmp *= 1000 * 1000 * 1000;
+    else if (*p == 'M')
+       tmp *= 1000 * 1000;
+    else if (*p == 'K')
+       tmp *= 1000;
+    if (*p == 'b' || *(p+1) == 'b')
+       tmp /= 8;
+
+    *bytes_per_sec = tmp;
+
+out:
+    regfree(&rec);
+    return rc;
+}
+
+static int vif_parse_rate_interval_usecs(XLU_Config *cfg, const char *interval,
+                                         uint32_t *interval_usecs)
+{
+    regex_t rec;
+    uint64_t tmp = 0;
+    const char *p;
+    int rc = 0;
+
+    regcomp(&rec, vif_internal_usec_re, REG_EXTENDED|REG_NOSUB);
+    if (regexec(&rec, interval, 0, NULL, 0)) {
+        xlu__vif_err(cfg, "invalid replenishment interval", interval);
+        rc = EINVAL;
+        goto out;
+    }
+
+    p = interval;
+    tmp = strtoull(p, (char**)&p, 0);
+    if (tmp == 0 || tmp > UINT32_MAX || errno == ERANGE) {
+        xlu__vif_err(cfg, "replenishment interval overflow", interval);
+        rc = EOVERFLOW;
+        goto out;
+    }
+
+    if (*p == 's' || *p == '\0')
+        tmp *= 1000 * 1000;
+    else if (*p == 'm')
+        tmp *= 1000;
+
+    if (tmp > UINT32_MAX) {
+        xlu__vif_err(cfg, "replenishment interval overflow", interval);
+        rc = EOVERFLOW;
+        goto out;
+    }
+
+    *interval_usecs = (uint32_t) tmp;
+
+out:
+    regfree(&rec);
+    return rc;
+}
+
+int xlu_vif_parse_rate(XLU_Config *cfg, const char *rate, libxl_device_nic *nic)
+{
+    uint64_t bytes_per_sec = 0;
+    uint64_t bytes_per_interval = 0;
+    uint32_t interval_usecs = 50000UL; /* Default to 50ms */
+    char *ratetok, *tmprate;
+    int rc = 0;
+
+    tmprate = strdup(rate);
+    if (!strcmp(tmprate,"")) {
+        xlu__vif_err(cfg, "no rate specified", rate);
+        rc = EINVAL;
+        goto out;
+    }
+
+    ratetok = strtok(tmprate, "@");
+    rc = vif_parse_rate_bytes_per_sec(cfg, ratetok, &bytes_per_sec);
+    if (rc) goto out;
+
+    ratetok = strtok(NULL, "@");
+    if (ratetok != NULL) {
+        rc = vif_parse_rate_interval_usecs(cfg, ratetok, &interval_usecs);
+        if (rc) goto out;
+    }
+
+    if (interval_usecs != 0 && (bytes_per_sec > (UINT64_MAX / interval_usecs))) {
+        xlu__vif_err(cfg, "rate overflow", rate);
+        rc = EOVERFLOW;
+        goto out;
+    }
+
+    bytes_per_interval =
+        (((uint64_t) bytes_per_sec * (uint64_t) interval_usecs) / 1000000UL);
+
+    nic->rate_interval_usecs = interval_usecs;
+    nic->rate_bytes_per_interval = bytes_per_interval;
+
+out:
+    free(tmprate);
+    return rc;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/tools/libxl/libxlutil.h b/tools/libxl/libxlutil.h
--- a/tools/libxl/libxlutil.h
+++ b/tools/libxl/libxlutil.h
@@ -94,6 +94,13 @@ int xlu_disk_parse(XLU_Config *cfg, int 
 int xlu_pci_parse_bdf(XLU_Config *cfg, libxl_device_pci *pcidev, const char *str);
 
 
+/*
+ * Vif rate parsing.
+ */
+
+int xlu_vif_parse_rate(XLU_Config *cfg, const char *rate,
+                       libxl_device_nic *nic);
+
 #endif /* LIBXLUTIL_H */
 
 /*
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -403,6 +403,24 @@ static void parse_disk_config(XLU_Config
     parse_disk_config_multistring(config, 1, &spec, disk);
 }
 
+static void parse_vif_rate(XLU_Config **config, const char *rate,
+                           libxl_device_nic *nic)
+{
+    int e;
+
+    if (!*config) {
+        *config = xlu_cfg_init(stderr, "command line");
+        if (!*config) { perror("xlu_cfg_init"); exit(-1); }
+    }
+
+    e = xlu_vif_parse_rate(*config, rate, nic);
+    if (e == EINVAL || e == EOVERFLOW) exit(-1);
+    if (e) {
+        fprintf(stderr,"xlu_vif_parse_rate failed: %s\n",strerror(errno));
+        exit(-1);
+    }
+}
+
 static void split_string_into_string_list(const char *str,
                                           const char *delim,
                                           libxl_string_list *psl)
@@ -906,7 +924,7 @@ static void parse_config_data(const char
                         nic->backend_domid = 0;
                     }
                 } else if (!strcmp(p, "rate")) {
-                    fprintf(stderr, "the rate parameter for vifs is currently not supported\n");
+                    parse_vif_rate(&config, (p2 + 1), nic);
                 } else if (!strcmp(p, "accel")) {
                     fprintf(stderr, "the accel parameter for vifs is currently not supported\n");
                 }
@@ -4855,6 +4873,7 @@ int main_networkattach(int argc, char **
 {
     int opt;
     libxl_device_nic nic;
+    XLU_Config *config = 0;
     char *endptr, *oparg;
     const char *tok;
     int i;
@@ -4910,6 +4929,7 @@ int main_networkattach(int argc, char **
         } else if (MATCH_OPTION("model", *argv, oparg)) {
             replace_string(&nic.model, oparg);
         } else if (MATCH_OPTION("rate", *argv, oparg)) {
+            parse_vif_rate(&config, oparg, &nic);
         } else if (MATCH_OPTION("accel", *argv, oparg)) {
         } else {
             fprintf(stderr, "unrecognized argument `%s'\n", *argv);
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

[PATCH 4 of 4 v2] xl: add "check-xl-vif-parse" test script

[Mathieu Gagné]

This test script runs "xl -N network-attach 0 <foobar>" against various
rate syntax and checks that the output is as expected.

Signed-off-by: Mathieu Gagné <mgagne@iweb.com>

diff --git a/tools/libxl/check-xl-vif-parse b/tools/libxl/check-xl-vif-parse
new file mode 100755
--- /dev/null
+++ b/tools/libxl/check-xl-vif-parse
@@ -0,0 +1,209 @@
+#!/bin/bash
+
+set -e
+
+if [ -x ./xl ] ; then
+    export LD_LIBRARY_PATH=.
+    XL=./xl
+else
+    XL=xl
+fi
+
+fprefix=tmp.check-xl-vif-parse
+
+expected () {
+    cat >$fprefix.expected
+}
+
+failures=0
+
+one () {
+    expected_rc=$1; shift
+    printf "test case %s...\n" "$*"
+    set +e
+    ${XL} -N network-attach 0 "$@" </dev/null >$fprefix.actual 2>/dev/null
+    actual_rc=$?
+    diff -u $fprefix.expected $fprefix.actual
+    diff_rc=$?
+    set -e
+    if [ $actual_rc != $expected_rc ] || [ $diff_rc != 0 ]; then
+        echo >&2 "test case \`$*' failed ($actual_rc $diff_rc)"
+        failures=$(( $failures + 1 ))
+    fi
+}
+
+complete () {
+    if [ "$failures" = 0 ]; then
+        echo all ok.; exit 0
+    else
+        echo "$failures tests failed."; exit 1
+    fi
+}
+
+e=255
+
+
+#---------- test data ----------
+
+# test invalid vif config
+expected </dev/null
+one 1 foo
+
+# test invalid rate units
+expected </dev/null
+one $e rate=foo
+one $e rate=foo
+one $e rate=10MB
+one $e rate=10MB/m
+one $e rate=10ZB
+one $e rate=10ZB/s
+one $e rate=10ZB/m
+
+# test b/s and B/s rate units
+expected <<END
+vif: {
+    "backend_domid": 0,
+    "devid": 0,
+    "mtu": 0,
+    "model": null,
+    "mac": "00:00:00:00:00:00",
+    "ip": null,
+    "bridge": null,
+    "ifname": null,
+    "script": null,
+    "nictype": null,
+    "rate_bytes_per_interval": 100000,
+    "rate_interval_usecs": 50000
+}
+
+END
+
+one 0 rate=16000000b/s
+one 0 rate=16000000b/s@50ms
+one 0 rate=2000000B/s
+one 0 rate=2000000B/s@50ms
+
+# test Kb/s and KB/s rate units
+expected <<END
+vif: {
+    "backend_domid": 0,
+    "devid": 0,
+    "mtu": 0,
+    "model": null,
+    "mac": "00:00:00:00:00:00",
+    "ip": null,
+    "bridge": null,
+    "ifname": null,
+    "script": null,
+    "nictype": null,
+    "rate_bytes_per_interval": 100,
+    "rate_interval_usecs": 50000
+}
+
+END
+one 0 rate=16Kb/s
+one 0 rate=16Kb/s@50ms
+one 0 rate=2KB/s
+one 0 rate=2KB/s@50ms
+
+# test Mb/s and MB/s rate units
+expected <<END
+vif: {
+    "backend_domid": 0,
+    "devid": 0,
+    "mtu": 0,
+    "model": null,
+    "mac": "00:00:00:00:00:00",
+    "ip": null,
+    "bridge": null,
+    "ifname": null,
+    "script": null,
+    "nictype": null,
+    "rate_bytes_per_interval": 100000,
+    "rate_interval_usecs": 50000
+}
+
+END
+one 0 rate=16Mb/s
+one 0 rate=16Mb/s@50ms
+one 0 rate=2MB/s
+one 0 rate=2MB/s@50ms
+
+# test Gb/s and GB/s rate units
+expected <<END
+vif: {
+    "backend_domid": 0,
+    "devid": 0,
+    "mtu": 0,
+    "model": null,
+    "mac": "00:00:00:00:00:00",
+    "ip": null,
+    "bridge": null,
+    "ifname": null,
+    "script": null,
+    "nictype": null,
+    "rate_bytes_per_interval": 50000000,
+    "rate_interval_usecs": 50000
+}
+
+END
+one 0 rate=8Gb/s
+one 0 rate=8Gb/s@50ms
+one 0 rate=1GB/s
+one 0 rate=1GB/s@50ms
+
+# test rate overflow
+expected </dev/null
+one $e rate=4294967296b/s
+one $e rate=4294967296Kb/s
+one $e rate=4294967296Mb/s
+one $e rate=4294967296Gb/s
+
+# test rate underflow
+expected </dev/null
+one $e rate=0B/s
+
+# test invalid replenishment interval
+expected </dev/null
+one $e rate=10Mb/s@foo
+one $e rate=10Mb/s@10h
+one $e rate=10MB/s@foo
+one $e rate=10MB/s@10h
+
+# test replenishment interval in seconds
+expected <<END
+vif: {
+    "backend_domid": 0,
+    "devid": 0,
+    "mtu": 0,
+    "model": null,
+    "mac": "00:00:00:00:00:00",
+    "ip": null,
+    "bridge": null,
+    "ifname": null,
+    "script": null,
+    "nictype": null,
+    "rate_bytes_per_interval": 10000000,
+    "rate_interval_usecs": 1000000
+}
+
+END
+one 0 rate=80Mb/s@1s
+one 0 rate=10MB/s@1s
+
+# test replenishment interval overflow
+expected </dev/null
+one $e rate=1B/s@4294967296us
+one $e rate=1B/s@4294968ms
+one $e rate=1B/s@4295s
+
+# test replenishment interval underflow
+expected </dev/null
+one $e rate=1B/s@0us
+
+# test rate limiting resulting in overflow
+expected </dev/null
+one $e rate=4294967295GB/s@5us
+one $e rate=4296MB/s@4294s
+
+complete
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH 3 of 4 v2] xl: add support for vif rate limiting

[Ian Campbell]

On Tue, 2012-04-17 at 02:58 +0100, Mathieu Gagné wrote:
> The `rate` keyword specifies the rate at which the outgoing traffic will be limited to.
> The default if this keyword is not specified is unlimited.
> 
> The `rate` keyword supports an optional replenishment interval parameter for specifying
> the granularity of credit replenishment. It determines the frequency at which
> the vif transmission credit is replenished. The default interval is 50ms.
> 
> For example:
> 
>         'rate=10Mb/s'
>         'rate=250KB/s'
>         'rate=1MB/s@20ms'
> 
> Signed-off-by: Mathieu Gagné <mgagne@iweb.com>
> 
> ddiff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
> --- a/tools/libxl/libxl.c
> +++ b/tools/libxl/libxl.c
> @@ -1854,6 +1854,13 @@ int libxl_device_nic_add(libxl_ctx *ctx,
>          flexarray_append(back, libxl__strdup(gc, nic->ip));
>      }
> 
> +    if (nic->rate_interval_usecs > 0) {
> +        flexarray_append(back, "rate");
> +        flexarray_append(back, libxl__sprintf(gc, "%llu,%lu",

I think you want to use PRIu64 and PRIu32 here. 
	"%"PRIu64",%"PRIu32"

> +                            (unsigned long long) nic->rate_bytes_per_interval,
> +                            (unsigned long) nic->rate_interval_usecs));
> +    }
> +
>      flexarray_append(back, "bridge");
>      flexarray_append(back, libxl__strdup(gc, nic->bridge));
>      flexarray_append(back, "handle");

> @@ -4855,6 +4873,7 @@ int main_networkattach(int argc, char **
>  {
>      int opt;
>      libxl_device_nic nic;
> +    XLU_Config *config = 0;
>      char *endptr, *oparg;
>      const char *tok;
>      int i;
> @@ -4910,6 +4929,7 @@ int main_networkattach(int argc, char **
>          } else if (MATCH_OPTION("model", *argv, oparg)) {
>              replace_string(&nic.model, oparg);
>          } else if (MATCH_OPTION("rate", *argv, oparg)) {
> +            parse_vif_rate(&config, oparg, &nic);
>          } else if (MATCH_OPTION("accel", *argv, oparg)) {
>          } else {
>              fprintf(stderr, "unrecognized argument `%s'\n", *argv);

Both this and the existing main_blockattach and pci{attach,destach}
appear to fail to call xlu_cfg_destroy and so are a bit leaky. I don't
think this is critical right now (the process exits right away) -- but
if you fancied fixing these up in a future patch it'd be much
appreciated.

Given the use of PRIuXX as above:

Acked-by: Ian Campbell <ian.campbell@citrix.com>

Ian.


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH 4 of 4 v2] xl: add "check-xl-vif-parse" test script

[Ian Campbell]

On Tue, 2012-04-17 at 02:58 +0100, Mathieu Gagné wrote:
> This test script runs "xl -N network-attach 0 <foobar>" against various
> rate syntax and checks that the output is as expected.
> 
> Signed-off-by: Mathieu Gagné <mgagne@iweb.com>

Acked-by: Ian Campbell <ian.campbell@citrix.com>



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH 0 of 4 v2] xl: add support for vif rate limiting

[Ian Jackson]

Mathieu Gagné writes ("[Xen-devel] [PATCH 0 of 4 v2] xl: add support for vif rate limiting"):
> This patch series implements the required plumbering for vif rate limiting in libxl/xl.

Thanks, I have applied the first two.

Whe you repost can you please make sure to wrap the commit messages to
70 columns or so ?

Thanks,
Ian.

Re: [PATCH 0 of 4 v2] xl: add support for vif rate limiting

[Mathieu Gagné]

On 4/17/12 2:15 PM, Ian Jackson wrote:
> Mathieu Gagné writes ("[Xen-devel] [PATCH 0 of 4 v2] xl: add support for vif rate limiting"):
>> This patch series implements the required plumbering for vif rate limiting in libxl/xl.
>
> Thanks, I have applied the first two.

Thanks.

> Whe you repost can you please make sure to wrap the commit messages to
> 70 columns or so ?

Done. I forgot to synchronize the time of my virtual machine.

The v3 of this patch series is up there at "Mon, 16 Apr 2012 23:51:22 
-0400".

-- 
Mathieu