[PATCH V2 0/2] staging: iio: light: use regmap in isl29018 for register access

[PATCH V2 0/2] staging: iio: light: use regmap in isl29018 for register access

[Laxman Dewangan]

This is patch series for using regmap framework for accessing device register.
THe first patch is for using tab for ndenting and second patch is for
using regmap apis for register accesses.

Laxman Dewangan (2):
  staging: iio: light: convert multiple spaces to tab
  staging: iio: light: isl29018: use regmap for register access

 drivers/staging/iio/light/Kconfig    |   19 ++--
 drivers/staging/iio/light/isl29018.c |  176 +++++++++++++++++-----------------
 2 files changed, 99 insertions(+), 96 deletions(-)

[PATCHi V2 1/2] staging: iio: light: convert multiple spaces to tab

[Laxman Dewangan]

Using tab inplace of multiple spaces for indenting.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
As per Jonathan's feedback, creating this patch for only
indenting cleanups.

 drivers/staging/iio/light/Kconfig |   18 +++++++++---------
 1 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index 53b49f7..bb633f6 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -4,15 +4,15 @@
 menu "Light sensors"
 
 config SENSORS_ISL29018
-        tristate "ISL 29018 light and proximity sensor"
-        depends on I2C
-        default n
-        help
-         If you say yes here you get support for ambient light sensing and
-         proximity infrared sensing from Intersil ISL29018.
-         This driver will provide the measurements of ambient light intensity
-         in lux, proximity infrared sensing and normal infrared sensing.
-         Data from sensor is accessible via sysfs.
+	tristate "ISL 29018 light and proximity sensor"
+	depends on I2C
+	default n
+	help
+	 If you say yes here you get support for ambient light sensing and
+	 proximity infrared sensing from Intersil ISL29018.
+	 This driver will provide the measurements of ambient light intensity
+	 in lux, proximity infrared sensing and normal infrared sensing.
+	 Data from sensor is accessible via sysfs.
 
 config SENSORS_ISL29028
 	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
-- 
1.7.1.1

[PATCH V2 2/2] staging: iio: light: isl29018: use regmap for register access

[Laxman Dewangan]

Using regmap for accessing register through i2c bus. This will
remove the code for caching registers, read-modify-write logics.
Also it will provide the debugfs feature to dump register
through regmap debugfs.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---

Change from V1:
- Spliting the changes in two patches.
- Separate patch for indenting cleanups.
- Rebased the code on top of -next which have Jonathan's recent changes.

 drivers/staging/iio/light/Kconfig    |    1 +
 drivers/staging/iio/light/isl29018.c |  176 +++++++++++++++++-----------------
 2 files changed, 90 insertions(+), 87 deletions(-)

diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index bb633f6..fd39f72 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -6,6 +6,7 @@ menu "Light sensors"
 config SENSORS_ISL29018
 	tristate "ISL 29018 light and proximity sensor"
 	depends on I2C
+	select REGMAP_I2C
 	default n
 	help
 	 If you say yes here you get support for ambient light sensing and
diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index 073e899..08add29 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -26,9 +26,11 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include "../iio.h"
 #include "../sysfs.h"
+
 #define CONVERSION_TIME_MS		100
 
 #define ISL29018_REG_ADD_COMMAND1	0x00
@@ -51,49 +53,22 @@
 
 #define ISL29018_REG_ADD_DATA_LSB	0x02
 #define ISL29018_REG_ADD_DATA_MSB	0x03
-#define ISL29018_MAX_REGS		(ISL29018_REG_ADD_DATA_MSB+1)
 
 #define ISL29018_REG_TEST		0x08
 #define ISL29018_TEST_SHIFT		0
 #define ISL29018_TEST_MASK		(0xFF << ISL29018_TEST_SHIFT)
 
 struct isl29018_chip {
-	struct i2c_client	*client;
+	struct device		*dev;
+	struct regmap		*regmap;
 	struct mutex		lock;
 	unsigned int		lux_scale;
 	unsigned int		range;
 	unsigned int		adc_bit;
 	int			prox_scheme;
-	u8			reg_cache[ISL29018_MAX_REGS];
 };
 
-static int isl29018_write_data(struct i2c_client *client, u8 reg,
-			u8 val, u8 mask, u8 shift)
-{
-	u8 regval = val;
-	int ret;
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
-
-	/* don't cache or mask REG_TEST */
-	if (reg < ISL29018_MAX_REGS) {
-		regval = chip->reg_cache[reg];
-		regval &= ~mask;
-		regval |= val << shift;
-	}
-
-	ret = i2c_smbus_write_byte_data(client, reg, regval);
-	if (ret) {
-		dev_err(&client->dev, "Write to device fails status %x\n", ret);
-	} else {
-		/* don't update cache on err */
-		if (reg < ISL29018_MAX_REGS)
-			chip->reg_cache[reg] = regval;
-	}
-
-	return ret;
-}
-
-static int isl29018_set_range(struct i2c_client *client, unsigned long range,
+static int isl29018_set_range(struct isl29018_chip *chip, unsigned long range,
 		unsigned int *new_range)
 {
 	static const unsigned long supp_ranges[] = {1000, 4000, 16000, 64000};
@@ -109,11 +84,11 @@ static int isl29018_set_range(struct i2c_client *client, unsigned long range,
 	if (i >= ARRAY_SIZE(supp_ranges))
 		return -EINVAL;
 
-	return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			i, COMMANDII_RANGE_MASK, COMMANDII_RANGE_SHIFT);
+	return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_RANGE_MASK, i << COMMANDII_RANGE_SHIFT);
 }
 
-static int isl29018_set_resolution(struct i2c_client *client,
+static int isl29018_set_resolution(struct isl29018_chip *chip,
 			unsigned long adcbit, unsigned int *conf_adc_bit)
 {
 	static const unsigned long supp_adcbit[] = {16, 12, 8, 4};
@@ -129,48 +104,49 @@ static int isl29018_set_resolution(struct i2c_client *client,
 	if (i >= ARRAY_SIZE(supp_adcbit))
 		return -EINVAL;
 
-	return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			i, COMMANDII_RESOLUTION_MASK,
-			COMMANDII_RESOLUTION_SHIFT);
+	return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_RESOLUTION_MASK,
+			i << COMMANDII_RESOLUTION_SHIFT);
 }
 
-static int isl29018_read_sensor_input(struct i2c_client *client, int mode)
+static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
 {
 	int status;
-	int lsb;
-	int msb;
+	unsigned int lsb;
+	unsigned int msb;
 
 	/* Set mode */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1,
-			mode, COMMMAND1_OPMODE_MASK, COMMMAND1_OPMODE_SHIFT);
+	status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND1,
+			COMMMAND1_OPMODE_MASK, mode << COMMMAND1_OPMODE_SHIFT);
 	if (status) {
-		dev_err(&client->dev, "Error in setting operating mode\n");
+		dev_err(chip->dev,
+			"Error in setting operating mode err %d\n", status);
 		return status;
 	}
 	msleep(CONVERSION_TIME_MS);
-	lsb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_LSB);
-	if (lsb < 0) {
-		dev_err(&client->dev, "Error in reading LSB DATA\n");
-		return lsb;
+	status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_LSB, &lsb);
+	if (status < 0) {
+		dev_err(chip->dev,
+			"Error in reading LSB DATA with err %d\n", status);
+		return status;
 	}
 
-	msb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_MSB);
-	if (msb < 0) {
-		dev_err(&client->dev, "Error in reading MSB DATA\n");
+	status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_MSB, &msb);
+	if (status < 0) {
+		dev_err(chip->dev,
+			"Error in reading MSB DATA with error %d\n", status);
 		return msb;
 	}
-	dev_vdbg(&client->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
+	dev_vdbg(chip->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
 
 	return (msb << 8) | lsb;
 }
 
-static int isl29018_read_lux(struct i2c_client *client, int *lux)
+static int isl29018_read_lux(struct isl29018_chip *chip, int *lux)
 {
 	int lux_data;
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
 
-	lux_data = isl29018_read_sensor_input(client,
-				COMMMAND1_OPMODE_ALS_ONCE);
+	lux_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_ALS_ONCE);
 
 	if (lux_data < 0)
 		return lux_data;
@@ -180,11 +156,11 @@ static int isl29018_read_lux(struct i2c_client *client, int *lux)
 	return 0;
 }
 
-static int isl29018_read_ir(struct i2c_client *client, int *ir)
+static int isl29018_read_ir(struct isl29018_chip *chip, int *ir)
 {
 	int ir_data;
 
-	ir_data = isl29018_read_sensor_input(client, COMMMAND1_OPMODE_IR_ONCE);
+	ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
 
 	if (ir_data < 0)
 		return ir_data;
@@ -194,7 +170,7 @@ static int isl29018_read_ir(struct i2c_client *client, int *ir)
 	return 0;
 }
 
-static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
+static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
 		int *near_ir)
 {
 	int status;
@@ -202,14 +178,15 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
 	int ir_data = -1;
 
 	/* Do proximity sensing with required scheme */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			scheme, COMMANDII_SCHEME_MASK, COMMANDII_SCHEME_SHIFT);
+	status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_SCHEME_MASK,
+			scheme << COMMANDII_SCHEME_SHIFT);
 	if (status) {
-		dev_err(&client->dev, "Error in setting operating mode\n");
+		dev_err(chip->dev, "Error in setting operating mode\n");
 		return status;
 	}
 
-	prox_data = isl29018_read_sensor_input(client,
+	prox_data = isl29018_read_sensor_input(chip,
 					COMMMAND1_OPMODE_PROX_ONCE);
 	if (prox_data < 0)
 		return prox_data;
@@ -219,8 +196,7 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
 		return 0;
 	}
 
-	ir_data = isl29018_read_sensor_input(client,
-				COMMMAND1_OPMODE_IR_ONCE);
+	ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
 
 	if (ir_data < 0)
 		return ir_data;
@@ -249,7 +225,6 @@ static ssize_t store_range(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 	int status;
 	unsigned long lval;
 	unsigned int new_range;
@@ -264,10 +239,11 @@ static ssize_t store_range(struct device *dev,
 	}
 
 	mutex_lock(&chip->lock);
-	status = isl29018_set_range(client, lval, &new_range);
+	status = isl29018_set_range(chip, lval, &new_range);
 	if (status < 0) {
 		mutex_unlock(&chip->lock);
-		dev_err(dev, "Error in setting max range\n");
+		dev_err(dev,
+			"Error in setting max range with err %d\n", status);
 		return status;
 	}
 	chip->range = new_range;
@@ -291,7 +267,6 @@ static ssize_t store_resolution(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 	int status;
 	unsigned long lval;
 	unsigned int new_adc_bit;
@@ -304,7 +279,7 @@ static ssize_t store_resolution(struct device *dev,
 	}
 
 	mutex_lock(&chip->lock);
-	status = isl29018_set_resolution(client, lval, &new_adc_bit);
+	status = isl29018_set_resolution(chip, lval, &new_adc_bit);
 	if (status < 0) {
 		mutex_unlock(&chip->lock);
 		dev_err(dev, "Error in setting resolution\n");
@@ -379,7 +354,6 @@ static int isl29018_read_raw(struct iio_dev *indio_dev,
 {
 	int ret = -EINVAL;
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 
 	mutex_lock(&chip->lock);
 	switch (mask) {
@@ -387,13 +361,13 @@ static int isl29018_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_LIGHT:
-			ret = isl29018_read_lux(client, val);
+			ret = isl29018_read_lux(chip, val);
 			break;
 		case IIO_INTENSITY:
-			ret = isl29018_read_ir(client, val);
+			ret = isl29018_read_ir(chip, val);
 			break;
 		case IIO_PROXIMITY:
-			ret = isl29018_read_proximity_ir(client,
+			ret = isl29018_read_proximity_ir(chip,
 					chip->prox_scheme, val);
 			break;
 		default:
@@ -459,15 +433,12 @@ static const struct attribute_group isl29108_group = {
 	.attrs = isl29018_attributes,
 };
 
-static int isl29018_chip_init(struct i2c_client *client)
+static int isl29018_chip_init(struct isl29018_chip *chip)
 {
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
 	int status;
 	int new_adc_bit;
 	unsigned int new_range;
 
-	memset(chip->reg_cache, 0, sizeof(chip->reg_cache));
-
 	/* Code added per Intersil Application Note 1534:
 	 *     When VDD sinks to approximately 1.8V or below, some of
 	 * the part's registers may change their state. When VDD
@@ -488,10 +459,9 @@ static int isl29018_chip_init(struct i2c_client *client)
 	 * the same thing EXCEPT the data sheet asks for a 1ms delay after
 	 * writing the CMD1 register.
 	 */
-	status = isl29018_write_data(client, ISL29018_REG_TEST, 0,
-				ISL29018_TEST_MASK, ISL29018_TEST_SHIFT);
+	status = regmap_write(chip->regmap, ISL29018_REG_TEST, 0x0);
 	if (status < 0) {
-		dev_err(&client->dev, "Failed to clear isl29018 TEST reg."
+		dev_err(chip->dev, "Failed to clear isl29018 TEST reg."
 					"(%d)\n", status);
 		return status;
 	}
@@ -500,10 +470,9 @@ static int isl29018_chip_init(struct i2c_client *client)
 	 * "Operating Mode" (COMMAND1) register is reprogrammed when
 	 * data is read from the device.
 	 */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1, 0,
-				0xff, 0);
+	status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, 0);
 	if (status < 0) {
-		dev_err(&client->dev, "Failed to clear isl29018 CMD1 reg."
+		dev_err(chip->dev, "Failed to clear isl29018 CMD1 reg."
 					"(%d)\n", status);
 		return status;
 	}
@@ -511,13 +480,13 @@ static int isl29018_chip_init(struct i2c_client *client)
 	msleep(1);	/* per data sheet, page 10 */
 
 	/* set defaults */
-	status = isl29018_set_range(client, chip->range, &new_range);
+	status = isl29018_set_range(chip, chip->range, &new_range);
 	if (status < 0) {
-		dev_err(&client->dev, "Init of isl29018 fails\n");
+		dev_err(chip->dev, "Init of isl29018 fails\n");
 		return status;
 	}
 
-	status = isl29018_set_resolution(client, chip->adc_bit,
+	status = isl29018_set_resolution(chip, chip->adc_bit,
 						&new_adc_bit);
 
 	return 0;
@@ -530,6 +499,32 @@ static const struct iio_info isl29108_info = {
 	.write_raw = &isl29018_write_raw,
 };
 
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL29018_REG_ADD_DATA_LSB:
+	case ISL29018_REG_ADD_DATA_MSB:
+	case ISL29018_REG_ADD_COMMAND1:
+	case ISL29018_REG_TEST:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/*
+ * isl29018_regmap_config: regmap configuration.
+ * Use RBTREE mechanism for caching.
+ */
+static const struct regmap_config isl29018_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = is_volatile_reg,
+	.max_register = ISL29018_REG_TEST,
+	.num_reg_defaults_raw = ISL29018_REG_TEST + 1,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 static int __devinit isl29018_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -546,7 +541,7 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 	chip = iio_priv(indio_dev);
 
 	i2c_set_clientdata(client, indio_dev);
-	chip->client = client;
+	chip->dev = &client->dev;
 
 	mutex_init(&chip->lock);
 
@@ -554,7 +549,14 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 	chip->range = 1000;
 	chip->adc_bit = 16;
 
-	err = isl29018_chip_init(client);
+	chip->regmap = devm_regmap_init_i2c(client, &isl29018_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		err = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "regmap initialization failed: %d\n", err);
+		goto exit;
+	}
+
+	err = isl29018_chip_init(chip);
 	if (err)
 		goto exit_iio_free;
 
-- 
1.7.1.1

Re: [PATCH V2 2/2] staging: iio: light: isl29018: use regmap for register access

[Lars-Peter Clausen]

On 04/19/2012 10:59 AM, Laxman Dewangan wrote:
> [...]
> -static int isl29018_read_sensor_input(struct i2c_client *client, int mode)
> +static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
>  {
>  [...]
> -		dev_err(&client->dev, "Error in reading MSB DATA\n");
> +	status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_MSB, &msb);
> +	if (status < 0) {
> +		dev_err(chip->dev,
> +			"Error in reading MSB DATA with error %d\n", status);
>  		return msb;

should return status instead of msb.

> [...]

Re: [PATCHi V2 1/2] staging: iio: light: convert multiple spaces to tab

[Jonathan Cameron]

On 4/19/2012 9:59 AM, Laxman Dewangan wrote:
> Using tab inplace of multiple spaces for indenting.
>
> Signed-off-by: Laxman Dewangan<ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>

See I remembered my name this time ;)
> ---
> As per Jonathan's feedback, creating this patch for only
> indenting cleanups.
>
>   drivers/staging/iio/light/Kconfig |   18 +++++++++---------
>   1 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
> index 53b49f7..bb633f6 100644
> --- a/drivers/staging/iio/light/Kconfig
> +++ b/drivers/staging/iio/light/Kconfig
> @@ -4,15 +4,15 @@
>   menu "Light sensors"
>
>   config SENSORS_ISL29018
> -        tristate "ISL 29018 light and proximity sensor"
> -        depends on I2C
> -        default n
> -        help
> -         If you say yes here you get support for ambient light sensing and
> -         proximity infrared sensing from Intersil ISL29018.
> -         This driver will provide the measurements of ambient light intensity
> -         in lux, proximity infrared sensing and normal infrared sensing.
> -         Data from sensor is accessible via sysfs.
> +	tristate "ISL 29018 light and proximity sensor"
> +	depends on I2C
> +	default n
> +	help
> +	 If you say yes here you get support for ambient light sensing and
> +	 proximity infrared sensing from Intersil ISL29018.
> +	 This driver will provide the measurements of ambient light intensity
> +	 in lux, proximity infrared sensing and normal infrared sensing.
> +	 Data from sensor is accessible via sysfs.
>
>   config SENSORS_ISL29028
>   	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"

Re: [PATCHi V2 1/2] staging: iio: light: convert multiple spaces to tab

[Greg KH]

On Thu, Apr 19, 2012 at 01:49:53PM +0100, Jonathan Cameron wrote:
> On 4/19/2012 9:59 AM, Laxman Dewangan wrote:
> >Using tab inplace of multiple spaces for indenting.
> >
> >Signed-off-by: Laxman Dewangan<ldewangan@nvidia.com>
> Acked-by: Jonathan Cameron <jic23@kernel.org>
> 
> See I remembered my name this time ;)

Thanks, that makes it easier for me to cut and paste :)

[PATCH V2 0/2] staging: iio: light: use regmap in isl29018 for register access

[Laxman Dewangan]

This is patch series for using regmap framework for accessing device register.
THe first patch is for using tab for ndenting and second patch is for
using regmap apis for register accesses.

Changes from V2:
 Taken care of Lars's review comment.

Laxman Dewangan (2):
  staging: iio: light: convert multiple spaces to tab
  staging: iio: light: isl29018: use regmap for register access

 drivers/staging/iio/light/Kconfig    |   19 ++--
 drivers/staging/iio/light/isl29018.c |  176 +++++++++++++++++-----------------
 2 files changed, 99 insertions(+), 96 deletions(-)