From: Fabio Estevam <fabio.estevam@freescale.com> To: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com>, devicetree-discuss@lists.ozlabs.org, shawn.guo@linaro.org, kernel@pengutronix.de, rob.herring@calxeda.com Subject: [PATCH v2] ARM: dts: Add basic support for imx6q-sabresd Date: Fri, 20 Apr 2012 14:10:38 -0300 [thread overview] Message-ID: <1334941838-18470-1-git-send-email-fabio.estevam@freescale.com> (raw) Add basic support for imx6q-sabresd. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- Changes since v1: - Added entry into Documentation - Added entry in arch/arm/mach-imx/Makefile.boot - Fixed ethernet - Dropped SDHC for now Documentation/devicetree/bindings/arm/fsl.txt | 4 ++ arch/arm/boot/dts/imx6q-sabresd.dts | 41 +++++++++++++++++++++++++ arch/arm/mach-imx/Makefile.boot | 3 +- arch/arm/mach-imx/mach-imx6q.c | 1 + 4 files changed, 48 insertions(+), 1 deletions(-) create mode 100644 arch/arm/boot/dts/imx6q-sabresd.dts diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index fecb580..0fc2da7 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -33,6 +33,10 @@ i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; +i.MX6 Quad SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + Generic i.MX boards ------------------- diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts new file mode 100644 index 0000000..368d2d7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6Q SABRE Smart Device Board"; + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + + aips-bus@02000000 { /* AIPS1 */ + spba-bus@02000000 { + uart1: uart@02020000 { + status = "okay"; + }; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + enet@02188000 { + phy-mode = "rgmii"; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 3851d8a..64eb671 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -42,4 +42,5 @@ dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ imx53-qsb.dtb imx53-smd.dtb dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb \ diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index da6c1d9..512c18d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -132,6 +132,7 @@ static struct sys_timer imx6q_timer = { static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6q-arm2", "fsl,imx6q-sabrelite", + "fsl,imx6q-sabresd", "fsl,imx6q", NULL, }; -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: fabio.estevam@freescale.com (Fabio Estevam) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2] ARM: dts: Add basic support for imx6q-sabresd Date: Fri, 20 Apr 2012 14:10:38 -0300 [thread overview] Message-ID: <1334941838-18470-1-git-send-email-fabio.estevam@freescale.com> (raw) Add basic support for imx6q-sabresd. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- Changes since v1: - Added entry into Documentation - Added entry in arch/arm/mach-imx/Makefile.boot - Fixed ethernet - Dropped SDHC for now Documentation/devicetree/bindings/arm/fsl.txt | 4 ++ arch/arm/boot/dts/imx6q-sabresd.dts | 41 +++++++++++++++++++++++++ arch/arm/mach-imx/Makefile.boot | 3 +- arch/arm/mach-imx/mach-imx6q.c | 1 + 4 files changed, 48 insertions(+), 1 deletions(-) create mode 100644 arch/arm/boot/dts/imx6q-sabresd.dts diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index fecb580..0fc2da7 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -33,6 +33,10 @@ i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; +i.MX6 Quad SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + Generic i.MX boards ------------------- diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts new file mode 100644 index 0000000..368d2d7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6Q SABRE Smart Device Board"; + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + + aips-bus at 02000000 { /* AIPS1 */ + spba-bus at 02000000 { + uart1: uart at 02020000 { + status = "okay"; + }; + }; + }; + + aips-bus at 02100000 { /* AIPS2 */ + enet at 02188000 { + phy-mode = "rgmii"; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 3851d8a..64eb671 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -42,4 +42,5 @@ dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ imx53-qsb.dtb imx53-smd.dtb dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb \ diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index da6c1d9..512c18d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -132,6 +132,7 @@ static struct sys_timer imx6q_timer = { static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6q-arm2", "fsl,imx6q-sabrelite", + "fsl,imx6q-sabresd", "fsl,imx6q", NULL, }; -- 1.7.1
next reply other threads:[~2012-04-20 17:10 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-04-20 17:10 Fabio Estevam [this message] 2012-04-20 17:10 ` [PATCH v2] ARM: dts: Add basic support for imx6q-sabresd Fabio Estevam [not found] ` <1334941838-18470-1-git-send-email-fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org> 2012-04-21 16:16 ` Shawn Guo 2012-04-21 16:16 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1334941838-18470-1-git-send-email-fabio.estevam@freescale.com \ --to=fabio.estevam@freescale.com \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=rob.herring@calxeda.com \ --cc=shawn.guo@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.